Search Results

Search found 18761 results on 751 pages for 'lot'.

Page 537/751 | < Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >

• IDE/PATA high-speed hard drive dock

  - by wfaulk

  I frequently need to access bare drives for backups and need a quick, high-speed way to deal with them. There are a multitude of SATA hard drive docks (for example), but I have a lot of IDE/PATA (hereafter "IDE") drives that I would like to be able to use similarly. There are IDE-to-SATA adapters so you can plug your IDE hard drive into a SATA port, so I don't see any reason why you couldn't use the same technology to have a native dock, yet none seems to exist. Now, I'm aware that 3.5" IDE drives do not have a specification for the layout of the connector, and therefore can't be slapped into a dock the same way a SATA drive could, but 2.5" PATA drives do. In fact, I'm not terribly interested in supporting 3.5" drives. It would be nice, but I deal with them far less frequently than 2.5" drives. Also, I'd very much like for the connection to the computer be faster than USB, preferably eSATA, I don't want to be spending time mounting a drive inside an enclosure, I don't want bare drives lying around with a cable hanging off of them, and I'd prefer a single dock rather than two. What seems like the ideal solution to me would be a regular SATA→eSATA dock and some sort of screwless adapter for IDE drives, but I'm open to any suggestions, regardless of my stated preferences, but which are, in some sort of order of preference: high-speed (faster than USB, at least) holder for drive (not just a cable) no complicated enclosure support for 3.5" IDE drives single dock Updates: Here's a 3.5" IDE to 3.5" SATA docking adapter that could be part of the solution. Weird. I figured that would be the impossible part. I was hoping to find something like this 2.5" to 3.5" SATA chassis that would take a 44-pin IDE drive internally. It looks like the Vantec EZ Swap EX comes awfully close. It has its own bay dock, but it looks like the SATA ports on the back are spaced properly, even if they're not aligned quite properly. Unfortunately, the proper position is at the very edge of the drive, which means that the docks' connectors are at the very edge of their recesses, which means there's no way to fit it in there.

  Read the article

• high virtual memory usage in openvz?

  - by freedrull

  We're having a lot of memory problems on a new OpenVZ box. It is supposed to have 1 gig of memory, I'm not sure how much of that is burstable or guaranteed memory. Programs in general seem to take up more virtual memory than they do on my box at home, and on our other OpenVZ box. I wrote this simple C program: #include <stdio.h> #include <stdlib.h> int main(){ char *thingy = malloc(500); getchar(): return 0; } So it simply allocates 500 bytes and then returns. I ran the program on 3 computers. On my home machine, and our other OpenVZ box it shows about 1k bytes of virtual memory being used. On the new problematic machine its about 3k. I know this is just virtual memory and not resident memory, but why is this machine allocating so much virtual memory? Are there some settings I need to adjust to the OpenVZ memory settings? I tried changing the stack size with ulimit -s 256 and restarting some demons, but I still saw the same results. I'm doing all of my monitoring with htop, is this even a good program to use with a OpenVZ vps? I've read I should be parsing the output of /proc/user_beancounters intead or something.

  Read the article

• What is optimal hardware configuration for heavy load LAMP application

  - by Piotr K.

  I need to run Linux-Apache-PHP-MySQL application (Moodle e-learning platform) for a large number of concurrent users - I am aiming 5000 users. By concurrent I mean that 5000 people should be able to work with the application at the same time. "Work" means not only do database reads but writes as well. The application is not very typical, since it is doing a lot of inserts/updates on the database, so caching techniques are not helping to much. We are using InnoDB storage engine. In addition application is not written with performance in mind. For instance one Apache thread usually occupies about 30-50 MB of RAM. I would be greatful for information what hardware is needed to build scalable configuration that is able to handle this kind of load. We are using right now two HP DLG 380 with two 4 core processors which are able to handle much lower load (typically 300-500 concurrent users). Is it reasonable to invest in this kind of boxes and build cluster using them or is it better to go with some more high-end hardware? I am particularly curious how many and how powerful servers are needed (number of processors/cores, size of RAM) what network equipment should be used (what kind of switches, network cards) any other hardware, like particular disc storage solutions, etc, that are needed Another thing is how to put together everything, that is what is the most optimal architecture. Clustering with MySQL is rather hard (people are complaining about MySQL Cluster, even here on Stackoverflow).

  Read the article

• mod_security2 and w00tw00t attacks

  - by Saif Bechan

  I have a server with apache and i recently installed mod_config2 because I get attacked a lot by this: My apache version is apache v 2.2.3 and i user mod_security2.c [Wed Mar 24 02:35:41 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:31 2010] [error] [client 202.75.211.90] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:47:49 2010] [error] [client 95.228.153.177] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Mar 24 02:48:03 2010] [error] [client 88.191.109.38] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) I tried configuring mod_security2 like this: SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind" SecFilterSelective REQUEST_URI "\w00tw00t.at.ISC.SANS" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:" SecFilterSelective REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:)" The thing in mod_security2 is that SecFilterSelective can not be used, it gives me erros. Instead i use a rule like this: SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind" SecRule REQUEST_URI "\w00tw00t.at.ISC.SANS" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:" SecRule REQUEST_URI "w00tw00t.at.ISC.SANS.DFind:)" Even this does not work. I don't know what to do anymore. Anyone have any advice?

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• Hostname error on my Slicehost Ubuntu server

  - by allesklar

  Like many folks who upgraded to Rails 2.2, I got an exception raised when sending an email. This version of Rails or later does require using tls for sending emails. The message in the production log file says: hostname was not match with the server certificate I did a whole lot of research and work on this and did everything I could. I changed my slice's hostname to ohlalaweb.com. If I run the command 'hostname' at the CL I get: ohlalaweb.com Postfix seems to work fine. I can send emails from the CL to my gmail, yahoo, and google apps gmail accounts with no problems. Here is the result of cat /etc/postfix/main.cf # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. myorigin = /etc/mailname smmtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ohlalaweb.pem smtpd_tls_key_file=/etc/ssl/certs/ohlalaweb.pem smtpd_use_tls=yes # SA created next line to force postfix to use self create certificate smtpd_tls_auth_only=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = ohlalaweb.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = localhost.localdomain, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all I have regenerated the ssl keys with the ohlalaweb.com host name. Any ideas or suggestions?

  Read the article

• ssh keys rejected each day

  - by EddyR

  I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

  Read the article

• Using NginX and Apache alongside for both static and dynamic files

  - by faridv

  Background: I've searched a lot and found these useful threads about using of Apache or NginX for static or dynamic files. But they are old (mostly about 1 or 2 years ago) and I think both webservers, specifically Nginx has had important changes in performance and usage. So I think take another look on these issue cannot be that bad. Nginx (for static files) and Apache (for dynamic content)? nginx better than apache for dynamic content? [closed] Apache or NGINX for PHP? Nginx as reverse proxy to Apache with only dynamic content? My question: I have a PHP web application with lots of dynamic files and lots of static contents (videos, images etc.) and it's currently running on a CentOS 6 server and Apache 2.2 since 2 months ago. In past few days, number of our site visitors have gained so fast and I just thought if this number continues to increase with current ratio, we need to change many things (web server, application, etc.) to prevent failures. Because of hardware limitations that we are facing, I thought that it's best for us to start with web server. Should I start with something else? Should I try to increase performance of my PHP application and forget about web server for now? (even if gonna take a long time!) Because of huge usage of .htaccess files (for redirection, rewrites, etc.), I think it's gonna be painful to migrate to NginX as default web server or maybe only for dynamic files. Does this mean that I can't even use Nginx as reverse proxy? I'm not sure latest stable version of NginX and PHP-FPM have a better performance over my current Apache and my limitations (too many things) won't let me to give it a try. Which one is doing better currently? What will I lose by migrating to Nginx? To make it short, what should I do?

  Read the article

• How to auto-cc a system email account any time a user creates an appointment

  - by Ferdy

  I will not bother explaining my full architecture or reasons for wanting this in order to keep this question short: Is it possible to auto-cc a certain email account any time a Exchange user creates an appointment or meeting in his own calendar? Is it possible using rules? Our Exchange 2007 server is outsourced, I cannot change the configuration or install plugins server-side Preferably, it still should work server-side, because users may use the Outlook client but also Outlook Web Access Is there any other way, perhaps using group policies? My conclusion so far is that the only viable way to accomplish this is to build an Outlook add-on. The problem there is that it will need to be managed for thousands of desktop users and that the add-on will not work when using another client (OWA, mobile). An alternative architecture could be to pull the information from the user's calendar on a scheduled basis. Given that we are talking about a lot of users, scalability is a major issue, this has also been confirmed by Microsoft. Can you confirm that my thinking is correct or do you have any other solutions?

  Read the article

• What determines what resolutions a laptop is willing to output over VGA?

  - by Joshua McKinnon

  I'm responsible for several conference rooms and have setup 1080p projectors and I provide both HDMI and VGA connectivity. HDMI for DisplayPort and Mini-DisplayPort, and VGA as a fallback, universal option. Contrary to what I expected, people seem to have much more trouble with the HDMI than VGA, so VGA gets used a lot more than you'd think (even as most workstation laptops made in the last 3-4 years have DisplayPort or Mini-DisplayPort...). Also to my surprise, VGA outputs over 1080p on a 50ft cable run with very minimal degradation on certain laptops - other laptops just don't offer 1080p as a resolution choice and top out at 1600x1200 or something else. Specific example: a ThinkPad W530 will do 1080p, a W520 won't, over VGA. (both do 1080p over displayport/mini-DP) What determines what resolutions a laptop is willing to output over VGA? I'm thinking this will come down to either a video driver that says it supports only certain resolutions for output, or limitations of the RAMDAC (which wouldn't be in play, at least DAC wise, on a digital output, but WOULD on VGA, an analog output). The basic reason for the question is that I noticed, say, a ThinkPad W520 with 1080p built in display, will output 1080p fine over DisplayPort to a 1080p projector, but will cap out at 1600x1200 (practically the same pixel count, just a little shy) on VGA. Now, this wouldn't be surprising at all except SOME laptops have no issue outputting 1080p over VGA, even with lower native resolutions. Why do I care? Well if there's some way I could enable it... for situations where my users end up using VGA anyway, it's preferable for display mirroring if they can output their laptop's native resolution, which, you guessed it, is very often 1080p on 15" models. DISCLAIMER: This is primarily a curiosity, I'm not claiming 1080p over VGA is ideal by any means, but hey, if it works. I've seen HDMI start artifacting more over same-length, same gauge cabling (up to 50' run in certain rooms). If you think this is better suited to SuperUser, please move it, but this is framed from an IT standpoint of something that affects a real pool of users in a multiple conference room, 50+ deployed laptop scenario.

  Read the article

• postgresql No space left on device

  - by pstanton

  Postgres is reporting that it is out of disk space while performing a rather large aggregation query: Caused by: org.postgresql.util.PSQLException: ERROR: could not write block 31840050 of temporary file: No space left on device at org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:1592) at org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1327) at org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:192) at org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:451) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:350) at org.postgresql.jdbc2.AbstractJdbc2Statement.executeUpdate(AbstractJdbc2Statement.java:304) at org.hibernate.engine.query.NativeSQLQueryPlan.performExecuteUpdate(NativeSQLQueryPlan.java:189) ... 8 more However the disk has quite a lot of space: Filesystem Size Used Avail Use% Mounted on /dev/sda1 386G 123G 243G 34% / udev 5.9G 172K 5.9G 1% /dev none 5.9G 0 5.9G 0% /dev/shm none 5.9G 628K 5.9G 1% /var/run none 5.9G 0 5.9G 0% /var/lock none 5.9G 0 5.9G 0% /lib/init/rw The query is doing the following: INSERT INTO summary_table SELECT t.a, t.b, SUM(t.c) AS c, COUNT(t.*) AS count, t.d, t.e, DATE_TRUNC('month', t.start) AS month, tt.type AS type, FALSE, tt.duration FROM detail_table_1 t, detail_table_2 tt WHERE t.trid=tt.id AND tt.type='a' AND DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')>=23 OR DATE_PART('hour', t.start AT TIME ZONE 'Australia/Sydney' AT TIME ZONE 'America/New_York')<13 GROUP BY month, type, t.a, t.b, t.d, t.e, FALSE, tt.duration any tips?

  Read the article

• Safe mode boot with no change on screen but ongoing hard disk activity - why?

  - by omatai

  I have a machine with a dying hard drive - bad sectors are starting to multiply :-( The first sign (24 hours ago) was that it had an unmountable boot volume. At this time, I tried booting to safe mode with command prompt, which worked, after which I rebooted normally and ran a chkdsk. It has since been working as well as I could expect, but slowly getting less reliable. So I scheduled another chkdsk on both partitions (C: - boot, D: - data), having freed up a lot of space on both partitions to give Windows a little more scope for repairs (hopefully?). I then rebooted. On reboot, it protested about the unmountable boot volume again, so I booted to safe mode. I got the same list of drivers loaded as yesterday, and then no change to the screen for the past 2 hours. However, I see a flickering hard drive indicator light - not always on, but seldom ever off. What is happening? Is the chkdsk that runs in safe mode one which produces nothing on the screen and so chkdsk could be doing its thing... or is Windows still trying (but failing) to boot into Safe Mode?

  Read the article

• Quick, Linux-compatible unit-aware calculator

  - by endolith

  I want to be able to press a keyboard combination, start typing a mathematical expression that includes units and slightly advanced math (not just a four-function calculator), and get a result immediately, in units that I specify, that I can copy and paste. Currently I open Firefox and press Ctrl+K, type in the search box, and it usually gives me a result in the drop-down from Google Calculator. It doesn't always, though, so I press "=" at the end, wait for a result, remove the equals, wait for a result, realize it doesn't understand the way I typed a unit, open the result in a new tab, etc. it sucks. Wolfram Alpha is smarter, but very much slower, and the output is all images, not text, and I don't have a quick widget for it, if such a thing could even exist. GNU units has a ton of units, which is great, and I can define my own units, which is great, but they have to be written in specific, unintuitive ways, it doesn't handle much advanced math, and I'd need to open a terminal, start units, etc. I hate the command line. I wasted a lot of time trying to make front-ends for units in Deskbar and Launchy, but I'm not a real coder and I don't use either of those anymore. Any other solutions or enhancements of these?

  Read the article

• AMIs in Amazon EC2

  - by Jack of Trades

  I really like the Amazon EC2 environment, and thought I'll spend a bit of time playing around with various types of public (Windows!) AMI servers. But testing has been a bit, well, questionable. Some of my findings: It's very difficult to know what exactly a specific public EC2 image is supposed to be doing. Many images come with little to no information. I can't seem to find the passwords to log onto various windows images. Why are they public if they can't be used!? Lots of images are based on S3, and not EBS backed. This is very annoying, as S3 takes a lot longer to do pretty much anything (stop, image etc.) I am only testing images here, so of-course I don't question the value of S3 for other attributes. The description of what an image does is almost useless and many times confusing. Have others come across these EC2 issues. Again, my interest was to just play around with public images for testing/experimentation/etc, and therefore these issues may not be too relevant for more normal EC2 deployment uses.

  Read the article

• What to do before connecting Ubuntu Server to the internet for the first time?

  - by CodeMonkey

  I just finished installing Ubuntu Server 12.10 on an Asus Eee PC 1000H (to be used as a home server/sandbox) from USB. I installed this software during installation: OpenSSH server LAMP server Samba file server Virtual Machine host I won't use 2, 3 or 4 for a while though. Can/should I turn these off somehow? I have turned home directory encryption on. Security updates are installed automatically. I have chosen a strong password for the single user. I have never plugged in the internet cable so far. Before doing so I'd like to ask: What can/should I do/install to increase security before connecting to the internet? Firewall? Fail2ban? Users/Passwords? Encryption? Enable/Disable functionality? etc. I'm sorry if you get this question a lot. I've searched around quite a while, but it still feels like I might overlook something important.

  Read the article

• copSSH and cygwin - Can't use windows style paths

  - by DrFredEdison

  I setup copSSH on one of my windows servers, and within the copSSH bash shell, I can't seem to use windows-style paths to remove and copy files. If I do try, I get the following: $ /bin/cp -r C:/Domains/_temp/collage_push/* C:/Domains/collage/ cygwin warning: MS-DOS style path detected: C:/Domains/_temp/collage_push/ Preferred POSIX equivalent is: /cygdrive/c/Domains/_temp/collage_push/ CYGWIN environment variable option "nodosfilewarning" turns off this warning. Consult the user's guide for more details about POSIX paths: http://cygwin.com/cygwin-ug-net/using.html#using-pathnames I have created a windows environment variable CYGWIN set to nodosfilewarning. It has no effect. I added export CYGWIN=nodosfilewarning to my .bashrc and doing a echo $CYGWIN in my ssh session confirms it is indeed getting set; yet again, it has no effect finally, I noted that when not doing my own export that CYGWIN contains "nontsec binmode" (no quotes), so I tried: export CYGWIN="nodosfilewarning nontsec binmode" in my .bashrc and still no dice. Older versions of CopSSH didn't have this issue. How can I actually override this error? I have a lot of scripts that already use windows-style paths, and I'd rather not change them if possible.

  Read the article

• can't Remote desktop to windows XP, blaming the server side

  - by Jin

  After rebooting my work PC (windows XP sp3) this Wednesday (thank to Microsoft Tuesday), I found that I can't remote desktop to my work PC from home (with VPN to company). I have been remote-desktop to work for years and I am really surprised since connectivity is not the problem, so I brought up wireshark to sniff the packets. I can see after TCP handshake, client sent X.224 Connection Request 03 00 00 13 0e e0 00 00 00 00 00 01 00 08 00 03 00 00 00 server sent X.224 Connection Confirm. 03 00 00 0b 06 d0 00 00 12 34 00 According to "MS-RDPBCGR", the official spec on RDP, the server should include Negotiation Response in the "Connection Confirm" message but it didn't. It's empty. I googled a lot but didn't find any clue on why server did that. By the way, I used the same remote desktop client and can connect to other windows XP PC. Here are a couple of pieces of information that may help to give a clue: Since TCP handshake (server port being 3389), I believe the svchost service is actually running. going to control panel -- system window, --- "Remote" tab, the remote desktop is indeeded checked and it states that my username is allowed. according to the packet capture, client didn't even get a chance to tell server what user was trying to logon. Yes, the progress bar showed up a few seconds and then it went back to the "Remote desktop Connection" window again. Searched "windowsupdate.log", didn't find any appearance of the word "remote".

  Read the article

• PPTP server connection closes - Too much data?

  - by Sebastian Hoitz

  I set up a PPTP server for my company. However, every time I have another computer connected to this server (i.e. our backup server) and a lot of data gets transferred, the connection to this computer closes. In the syslog on the PPTP server I find this message: Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Reaping child PPP[2583] Apr 22 12:44:34 komola-chase pppd[2583]: MPPE disabled Apr 22 12:44:34 komola-chase pppd[2583]: Connection terminated. Apr 22 12:44:34 komola-chase pppd[2583]: Exit. Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Client 192.168.0.11 control connection finished Apr 22 12:55:11 komola-chase pptpd[2674]: GRE: xmit failed from decaps_hdlc: No buffer space available Apr 22 12:55:11 komola-chase pptpd[2674]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Apr 22 12:55:11 komola-chase pppd[2675]: Modem hangup Apr 22 12:55:11 komola-chase pppd[2675]: Connect time 23.0 minutes. Hopefully you can help me as to what is wrong. As far as I can tell, there is no compression enabled on the PPTP server (npbsdcomp option). Thank you!

  Read the article

• fail2ban log parsing too slow on Raspberry Pi - options? [migrated]

  - by Gordon Morehouse

  I'm running fail2ban on a Raspberry Pi at 950MHz which I cannot overclock further. The Pi is occasionally subject to SYN floods on particular ports. I've set up iptables to throttle the rate of SYNs on the port of interest; when the throttle limits are exceeded, hosts which send SYNs are dropped into the REJECT chain and the particular SYN packet which exceeded the limit is logged. fail2ban then watches for these logged SYNs and, after seeing a few, temporarily bans the host for a short time (this is a transient issue in the app I'm working with). The problem is that the SYN floods can occasionally reach rates which are too fast for fail2ban to keep up with; I'll see 20-40 log messages per second, and eventually fail2ban falls behind and becomes ineffective. To add insult to injury, it continues consuming a LOT of CPU as it tries to catch up. I have verified that DROP chained packets from hosts already banned by fail2ban are not logged, and thus do not add to its load. What are my options here? I have a few ideas, but no clear path forward. Could I make the log-parse regex "easier" so it takes fewer cycles? Would using iptables --log-prefix to put a token near the start of the log message, and/or otherwise simplifying/altering the fail2ban regex help? Here is the current fail2ban config line containing a regex: failregex = kernel:.*?SRC=(?:::f{4,6}:)?(?P<host>[\w\-.^_]+) DST.*?SYN Is there a faster way for fail2ban to watch for the packets exceeding the limits than parsing kern.log? Could fail2ban be run under PyPy instead of CPython with minimal nonstandard wizardry (the OS is Raspbian 7, so, mostly Debian 7)? Is there something better than fail2ban that I could use to watch for the packets which exceed the SYN limits, and after N exceeds in X seconds, temporarily put the offending IP into the iptables DROP bucket, and take it out when the ban timer expires? Again, I'd vastly prefer a solution that uses as much software available in Debian as possible, though I can build Debian packages in a pinch.

  Read the article

• NAT cause huge External (actually internal) bandwidth usage

  - by user67953

  We have 4 servers running in a data center, with internal IP: 192.168.3.* assigned. A hardware (FORTIGATE) firewall configured NAT, and it will lead the traffic as: external IP: 111.222.333.10 -> 192.168.3.10 www.server1.com 111.222.333.11 -> 192.168.3.11 www.server2.com 111.222.333.12 -> 192.168.3.12 www.server3.com In DNS, we have www.server1.com A 111.222.333.10 Now if I send a lot of data to www.server1.com from www.server2.com, the data will be send through 111.222.333.10 (external IP) and this cause our bandwidth usage huge (expensive!). The work around I have is to add a local host mapping to server2: 192.168.3.10 www.server1.com. That way when send files from server2 to www.server1.com, it will be internal. However, we are having more and more servers, it would be hard to manually add mapping to every server. Just wondering do we have another solution for this? Can we do something in the FORTIGATE firewall? ps. The DNS server being used is public, such as opendns, Google dns etc.

  Read the article

• Accidentally deleting all OSX users using dscl

  - by gutch

  OK, so I just did something really stupid and deleted all the user accounts on an OSX 10.6.6 machine by running this: sudo dscl . -delete /users What I actually wanted to do was delete a single, troublesome account using a command like this: sudo dscl . -delete /users/localadmin ...but I absent-mindedly pressed return too early and deleted the lot. I've tried using -list and can confirm that I have indeed wiped all the accounts. The machine is currently running fine, but I'm sure that once I log out / reboot then it will be completely broken. I don't mind that I've deleted the normal user accounts (there was only one I wanted anyway). But it's surely going to be a big problem that system accounts like _installer and _jabber and _lda and _windowserver etc etc are gone. So my question is, how can I restore the standard set of system accounts? Do I have to reinstall OSX from scratch? Or can I either: undelete those system accounts, or run some command to recreate the system accounts?

  Read the article

• Samba Share - MS Excel when saved (can't access the file, there are several possible reasons)

  - by brain90

  Dear Fellow ServerFaulter, I have a weird problem in my samba share. I have one share definition for 3 client (A,B,C) This share contain some excel file which having a lot of formula and linked each other. Client A access the file with libre office (ubuntu), client B access with WinXP & MS Office 2003, The write and read process working successfuly on Both of them. The problem occur when client C accessing the same file with MS Excel 2003 (windows xp). This messagebox appear when he saving the file : Microsoft office excel cannot access the \\192.168.1.23\myshare\ There are several possible reasons: - The File ort path does not exist The file is being used by another program. - The workbook you are trying to save has the same name as a - Currently open workbooks. I was trying http://support.microsoft.com/kb/291204 but it didnt work. Below is my share definition : [brainshare] comment = brainshare path = /opt/brainshare/ valid users = @brainshare force group = brainshare read only = No create mask = 0775 veto files = /*.scr/*.eml/thumbs.com/ Help me please... Thanks in advance ! Server: Ubuntu 10.10, Samba version 3.5.4

  Read the article

• How To Map Fn+Key (Multiple Keys) To Other Key in Windows?

  - by Mohamed Meligy

  I've got a ThinkPad W530 laptop, which replaces the Application Key (also known as Menu Key or Mouse Right Click key, usually between Right Alt and Right Ctrl) with the Print Screen key. So, I need to replace Prt/Scr with Application key. That's easy, all key mapping software like SharpKeys or whatever can do that. There are even a few threads in SuperUser about dozen of those. But then, the different part to this question from the others (which is why it's not a duplicate, I think) is that I also don't want to completely lose the Prt/Scr key. I'm thinking about replacing it with either: Fn + Prt/Scr Fn + F2 These seemed to have no special meaning, so, I'm not overriding anything, just adding functionality to either of them (one of them, not both), to be the new Prt/Scr key. I couldn't find any key mapping software that can detect or let me select more than one key to map, even when the other key is something like Fn key (although they all can map Fn key itself, without combination). I know it may make sense why this restriction exists, but it'll be really useful if I can override it though. Do you know any program that can do that? Thanks a lot.

  Read the article

• Expected IOPS for log writing on PS6000X SAN?

  - by dssz

  Customer is experiencing poor Sybase ASE 15 performance on a PS6000X SAN with 16 X 450GB 10K in RAID-50. The server is a Dell R710 running 2003 server R2 64bit in ESX 4.0.0,256968 I've used sqlio to benchmark the sequential write performance of 4KB blocks on the drive. sqlio -kW -t1 -s600 -dE -o1 -fsequential -b4 -BH -LS sqliotestfile.dat Result is 1900 IOPS. However, when Sybase is running a sustained workload of small inserts SAN HQ shows a consistent 590 IOPS (and 100% 4K write activity). It also shows that the write latency increases to 1.2ms from <1ms. Monitoring and tests in Sybase demonstrate the performance problem is IO related and in particular there is a lot of wait time writing to the log. The SAN indicates that write caching is enabled. What IOPS should the SAN be capable of for 4k sequential write activity? Also, with write caching enabled, shouldn't the controller be batching up the 4K writes into something more efficient? Also, any tips on Sybase on ESX would be appreciated.

  Read the article

• Are relative-path symlinks reliable on Rackspace Cloud Sites?

  - by Jakobud

  Rackspace's Cloud Sites have a lot of stupid limitations. For example, no SSH (in or out), no shell, no RSYNC, etc... (even through cron). Recently I learned that you can't reliably use symlinks in Cloud Sites. Apparently this is because the absolute path of your sites could change at any moment, since it's a shared host environment split up between many disks/servers. I guess different account's sites get moved from disk to disk whenever Rackspace decides to. Supposedly to increase efficiency across the board. So after talking with a Rackspace tech, he said they cannot guarantee that symlinks would always work. Obviously this is because if you have a symlink that use's an absolute path like this: //mnt/disk-34566/home/user34566/files/sites/www.mysite.com/mydir If you files go moved to a different disk (or whatever they do), then the absolute path would be different and the link would now be broken. That makes sense. So next, I asked the Rackspace tech if relative path symlinks were reliable. So if I have the following link: files/sites/www.mysite.com/mylink --> ../www.myothersite.com/anotherdir You can see that the symlink simply points to a nearby directory's sub-directory. He said they cannot guarantee that even those would always work either. Since it uses a relative path to another nearby directory I'm not sure how it could ever break from something Rackspace would do. Do relative symlinks somehow rely on absolute paths underneath? Or is Rackspace using some weird custom filesystem where they will break from absolute path changes? It seems like a relative-path symlink would be fine and would only break if the user did something to mess up the directories involved. But when the tech's say that they "don't officially support symlinks of any kind" that makes me hesitant to use them for large commercial websites in Cloud Sites. Can anyone with Rackspace experience give input on this topic?

  Read the article

< Previous Page | 533 534 535 536 537 538 539 540 541 542 543 544  | Next Page >