Search Results

Search found 24609 results on 985 pages for 'private ip'.

Page 538/985 | < Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >

• Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

  - by Darin Peterson

  Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

  Read the article

• How to setup and manage a shared hosting server on Windows Server 2008 R2 Web Edition?

  - by Motivated Student

  Background I am a newbie in using Windows Server 2008 R2 Web Edition (and other editions as well). I have a static IP, a very fast internet connection, a server (PRIMERGY TX100 S1 Server) and Windows Server 2008 R2 Web Edition (trial version). The objective is to setup the server to be a shared hosting server such that each of my friends has a private account to manage his/her domain. to upload his/her web content to the server using the encrypted ftp. to manage database administration. to manage Certificate. etc Questions Is there a good reference to learn "how to setup and manage a shared hosting server on Windows Server 2008 R2" ? What are the rough steps I have to do to accomplish my objective?

  Read the article

• Dual Home HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Should I consolidate multiple identical VMs into BSD jails?

  - by Josh

  We run a number of Openfire XMPP/Jabber servers. Due to the way Openfire works, we cannot easily run multiple Openfire instances on one server, so I have 5 identical VMware ESXi VMs, each with CentOS, MySQl, Java, and Openfire. They're the exact same, except for their IP addresses, the actual Openfire MySQL database and it's config file. I am wondering if this is the optimal configuration, or if it would be better to move these VMs to a single FreeBSD machine and put each one inside a FreeBSD jail. Specifically, I am wondering if the benefit of VMWare's Transparent Page Sharing (TPS) would outweight the cost of running 5 identical OSes. Would I end up using less memory with one large FreeBSD machine and java running in bsd jails?

  Read the article

• IIS 7.5 doesn't load static html pages

  - by Kizz

  There is an IIS 7.5 freshly installed on a dedicated server. ASP.NET 4.0 Web app copied to its folder, new website is created on its own IP on post 80, IIS_IUSR and IUSR accounts have read/execute rights on site's folder, the site is assigned to its own Integrated app pool with 4.0 .NET (I tried Classic pool with the same results). The problem: when I try to access this web site, browser only loads content generated by .NET resources such as aspx pages, .axd files, etc. Static images, static js, css and html files are in the page source but IIS doesn't serve them. Dev tools in all browsers complain that all those static resources have been sent by the server with wrong content type (plain text instead of image, styles, etc). What do I do wrong?

  Read the article

• Can't get bridged networking to work between linux guest virtual machine and Mac host

  - by tgoneil

  I'm trying to establish bridged networking from linux mint vsn 12 in virtualbox to a Mac Lion host. Mac config: Network setting: en3 configured by DHCP Sharing setting: Internet Sharing selected, Share connection from en3 to computers using en3 Virtualbox Linux setting: Network setting: Bridged Adapter, Name: en3 I can ping from host (192.168.2.1) to guest (192.168.2.2) and guest to host, but I Cannot ping from the Linux guest to the outside world. Connection in host is up, because I can ping from the Mac host to the outside world. Something else that's seems weird to me, in the Mac Network setting, the IP Address generated by DHCP says 169.254.243.185. What the heck is that?? When I open a terminal up in the Mac, however, ifconfig shows its en3 inet address as 192.168.2.1.

  Read the article

• restricting access only through domains on nginx on virtual hosts

  - by Mo J. Mughrabi

  I have finished setting up nginx for virtual hosting, this is how my config files look like server { listen 80; server_name domain.com; access_log /home/domain.com/prod_webapp/logs/access.domain.com.log; error_log /home/domain.com/prod_webapp/logs/error.domain.com.log; location /static { root /home/domain.com/prod_webapp/mocorner/ph/; } location / { try_files $uri @uwsgi; } location @uwsgi { include uwsgi_params; uwsgi_pass unix:/tmp/domain_uwsgi.sock; }} on the same machine, I have domain1.com and domain2.com, each when i access I get its content which is great. My problem is that when i try to access the user using the IP address i get one of the sites in the virtual hosts too.. Although i disabled the default (removed the symbolic link) from sites-enabled folder but still not solved it for me. any suggestions?

  Read the article

• Cannot connect remote mysql, Cpanel?

  - by BerkErarslan

  I use centos and cpanel I need to use remote mysql with php. I add the ip which I try connect to server to "Remote Database Access Hosts" on Cpanel. However, when I try to connect server with this code: <?php $link = mysql_connect("server_ip", "xxx", "xxx") or die(mysql_error()); $db = mysql_select_db("xxx", $link) or die (mysql_error()); print_r($db); I have error like this: Warning: mysql_connect() [function.mysql-connect]: Can't connect to MySQL server on 'xxxx' (10060) in C:\AppServ\www\test.php on line 3 Can't connect to MySQL server on '94.138.204.234' (10060) I also try to connect using "server_ip:3306" but it still doesn't work. How Can I solve this problem ?

  Read the article

• Need help setting up mail DNS records

  - by Dave

  Hi, We are hosting our web site on host monster, but want our email to continue to be hosted at the old site. Our domain points to the hostmonster DNS servers, but I can't figure out the right configuration for the remote email servers. We have one MX entry, which is priority: 0 domain: ourdomain.com And then we have these DNS entries ... name: mail.ourdomain.com ttl: 14400 class: IN type: A record: old.host.ip.address name: mail1.ourdomain.com ttl: 14400 class: IN type: A record: old.host.secondip.address Can someone tell me what I need to add/edit to get mail to correctly route to our old host? Thanks, - Dave

  Read the article

• Running bridged-networking vmware player on a Linux machine with 2 interfaces

  - by Roman D

  I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

  Read the article

• Cannot connect to Musicbrainz VirtualBox through SSH using Mac

  - by olovholm

  I am trying to connect my mac terminal shell to a VirtualBox running the Musicbrainz server. I have configured the network through a BridgeAdapter and running ifconfig on both the host and the guest show corresponding IP addresses. I can now ping the guest, but I cannot connect through SSH. The verbose output from the SSH client on my mac states: (olaenv)hf-79-202:Python oclovhol$ ssh -vv [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 127.0.0.1 [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /Users/oclovhol/.ssh/id_rsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_rsa-cert type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa type -1 debug1: identity file /Users/oclovhol/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Netgear Wireless-n 150 wrn1000v2

  - by Jordan

  I'm not sure if this is the place to ask this question, move it if it's not. I'm trying to fix a wireless network. It only connects to a few devices and when it does work the connection is spotty. The router is a netgear wireless-n 150 wrn1000v2. Connecting to the router isn't a big problem, but connecting to the internet via WiFi is. I can't upgrade the firmware becuase it is from Comcast and it seems as though they only allow their versions of the firmware. I've monitored the network with wireshark and I see that the devices that are having trouble connecting are constantly asking "who is 192.168.1.1 tell 192.168.1.x" where x is the ip for the device. 192.168.1.1 is the router. This is from running wireshark on the wireless device. What does this mean. At this point I feel like buying a new router is the only option.

  Read the article

• Strategies for very fast delivery of webpages.

  - by Cherian

  I run a website Cucumbertown with an initial pay load of nearly 9KB zipped. All my js is delayed loaded with requirejs and modernizer is the only exception. Now all my webpages are Nginx cached and only 10-15% hits go to the backend proxy. And the cache is invalidated by logged in users as proxy_cache_bypass. So for an anonymous user its nearly always a cache hit. I have some basic OS tuning with default via ip dev eth0 initcwnd 15 net.ipv4.tcp_slow_start_after_idle 0 Despite an all cache & large initcwnd my pages still take 2.5 – 3 seconds. I have a yslow score of And page speed at Are there strategies that can help deliver webpages even faster than this? Deliver pages at 1+ second time for 10KB payload? Notes: My servers run of a fairly good data center from Linode at Fremont.

  Read the article

• How to protect ejabberd from bruteforce attacks?

  - by Sergey

  It writes this in logs: =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.467.0>:ejabberd_listener:281) : (#Port<0.4384>) Accepted connection {{10,254,239,2},51986} -> {{10,254,239,1},5222} =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.1308.0>:ejabberd_c2s:784) : ({socket_state,tls,{tlssock,#Port<0.4384>,#Port<0.4386>},<0.1307.0>}) Failed authentication for USERNAME =INFO REPORT==== 2012-03-14 17:48:54 === I(<0.1308.0>:ejabberd_c2s:649) : ({socket_state,tls,{tlssock,#Port<0.4384>,#Port<0.4386>},<0.1307.0>}) Failed authentication for USERNAME It doesn't write IP with a failure. And strings "Accepted connection" and "Failed auth.." may even not stand nearby (as I think on heavily loaded servers) to be able to use fail2ban. What to do? And how jabber servers (using ejabberd) are protected?

  Read the article

• Load balancing with rsync

  - by David

  i have 2 server with public ip: SERVER A - 10.10.10.11 SERVER B - 10.10.10.12 both of them are centos 6 in OS, installed nginx with php-fpm, 2 exact same website stored at: /var/www/html. Domain with: myxdomain.com and dns hosted with cloudflare ( since cloudflare do support round robin ) to point the domain to A record of 10.10.10.11 and 10.10.10.12. I know that round robin dns does not cover the failover or fallover, but it does not matter, what i need is: How do i sync the both content of /var/www/html server A and server B to be exactly same? Lets say: 1) user uploaded their file to server A, the file content will be sync to server B as well. 2) user uploaded their file to server B, the file content will be sync to server A as well. rsync will be good choice here? Any example of command line and cronjob time that suitable? thanks

  Read the article

• Mac Mini's internet very slow, every other device fine (PC, iPhone, Xbox 360)

  - by alex

  I recently haven't used my Mac Mini for about 5 days (however it was left on). I seem to be able to connect and get great download / upload speeds through my PC, Xbox 360, iPhone and parents' laptop. However, my Mac Mini is very slow. OS X's Mail.app is downloading mail at 0.4kbps and then dropping to 0. Skype file transfers are doing the same. Browsing the net is a terrible experience. It is taking 30 seconds or more to download basic pages. All of my devices connect wirelessly to a Netgear router / modem. I have tried giving the Mac Mini a manual IP, and renew DHCP lease, as well as flush DNS in Terminal. I have also rebooted the router / modem twice, and the Mac Mini twice. Do you know what could be causing this? Thanks

  Read the article

• securing source code with bitlocker

  - by Daniel Powell

  We need to deploy a web based application at a client site where it will be within their local intranet. Part of our requirement is to provide some basic security to protect our IP. I realise that nothings a 100% guaranteed fix but we are just looking to make it a bit harder for most people. The server will be running server 2008 and I was considering using bitlocker as a cheap and nasty way to protect it. From what I understand assuming the mobo supports it we can use the Transparent bitlocker mode and this means that moving the hdd to another pc will mean the hdd will be unreadable in that machine baring some sort of cold boot attack to steal the encryption keys. Is this assumption correct and in the case that the motherboard or any other component fails in the pc and we need to replace it do we lose access to our data or is there a way to unencrypt it (obviously accessible to only our company) EDIT: we do have legal documents that cover this and we will be locking the pc physically and the client will not have access to the pc (windows login) other than via the website we host on it

  Read the article

• Bridging VirtualBox over OpenVPN TAC adapter on Windows

  - by Sean Edwards

  I'm trying to configure a virtual machine (VirtualBox guest running Backtrack 4) with a bridged adapter over a VPN connection. The VPN is is hosted by the cybersecurity club at my university, and connects to a sandboxed LAN designed for penetration testing against various servers that the club has built. My host (Windows 7 Ultimate) connects to the VPN fine and is assigned an IP through DHCP, but for some reason the VM can't do the same thing, and I'm not sure why. It's like OpenVPN is filtering out packets from the MAC address it doesn't recognize. I want the virtual machine to bridge over the VPN connection, because our IT office has very strict policies about what you can and can't do on the network. I want to be able to run active attacks (ARP spoofing, nmap, Nessus scans) in the sandbox environment without risking the traffic accidentally going over the university network and getting my internet access revoked. Bridging over the VPN connection and running all attacks from inside the VM would solve that problem. Any idea why the host can use this interface, but the VM can't?

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• SSL Proxy: Forwarding without the encryption

  - by John

  I have a python application listening on port 9001 for HTTP traffic. I'm trying to configure Apache (or anything, really) to listen on port 443 for HTTPS connections, and then forward the connection, sans encryption, to port 9001 on the same machine. My application would then reply via the proxy, where the encryption would be reapplied, and returned to the client transparently. I'm not doing anything crazy with the site names and SSL certs, I have one public IP, one hostname, and one SSL cert. Stripping the encryption at the proxy doesn't seem to be a common requirement. Is what I'm asking for a normal requirement? Are there other concerns with this sort of configuration?

  Read the article

• Cyrus: How Do I Configure saslauthd For Authentication?

  - by Nick

  I'm trying to get Cyrus IMAP (v 2.2 on Ubuntu 9.04) setup and working, but I'm having a bit of trouble getting the login working correctly. I've created a mailbox for my test user "nrahl": cm user/nrahl and then created a password: $ saslpasswd2 nrahl I'm attempting to connect to the mailbox using Thunderbird. I'm using the machine's LAN IP address as the host, and "nrahl" as the username. It connects to the server and prompts me for the password. When I enter it, I get "Login to server failed." in Thunderbird, and /var/log/mail.log shows: Apr 15 19:20:01 IMAP cyrus/imap[1930]: accepted connection Apr 15 19:20:09 IMAP cyrus/imap[1930]: badlogin: [192.168.5.21] plaintext nrahl SASL(-13): authentication failure: checkpass failed Part of /etc/imapd.conf with comments removed: sieveusehomedir: false sievedir: /var/spool/sieve #mailnotifier: zephyr #sievenotifier: zephyr #dracinterval: 0 #drachost: localhost hashimapspool: true allowplaintext: yes sasl_mech_list: PLAIN #allowapop: no #sasl_maximum_layer: 256 #loginrealms: example.com #virtdomains: userid #defaultdomain: sasl_pwcheck_method: saslauthd #sasl_auxprop_plugin: sasldb sasl_auto_transition: no UPDATE: When setting: sasl_pwcheck_method: alwaystrue in /etc/imapd.conf, login works correctly. So I'm assuming the issue is saslauthd related.

  Read the article

• Exchange Disconnecting on EHLO with remote telnet

  - by Timothy Baldridge

  When I go to the local terminal on my Exchange box (SBS 2008) I can do this: telnet 127.0.0.1 25 220 Exchange banner here EHLO example.com 250 Server name However when I go from another box, or from the actual IP of the server I get this: telnet 192.168.21.20 25 220 Exchange banner here EHLO example.com 421 4.4.1 Connection timed out Connection to host lost. The odd thing is, this server is currently in production and working fine (receiving mail for our entire domain). But my C# programs can't send mail to it (they get this same error). Any ideas?

  Read the article

• Setting up nginx on Ubuntu?

  - by Industrial

  Hi everyone, I've just setup a VPS running Ubuntu server 10.10 as a test environment to run with nginx. This far i've ran apt-get install nginx php5 php5-cgi and accessed the IP of the VPS with a browser which outputs It works, so it should be ready to run. Never having worked with nginx in the past, I have no idea on what to do next. How should I config my nginx install to run properly as a staging server in my LAN? Apparently, there's multiple configs for nginx including sites-default and nginx-default making me really confused.

  Read the article

• Win 2008 r2 -- client and server are both behind a NAT

  - by Mike Dehari

  I am new to win2008. Have Win2008 R2 installed. Need to know how a client system (Win7), using remote desktop, terminal server, or whatever windows 2008 provides to connect to it (as a user or an admin). Both the client (Win7) and the server (win2008) are inside a NAT (with 192.168......... addresses). Both have real internet addresses (they are in different cities 173.64.......). How can I use the internet from the client (Win7) to connect to the server (Win2008). On both systems, I have "allowed other systems to connect". I am familiar with tcp/ip, ports......etc.

  Read the article

• Add power over Ethernet without new switches?

  - by dannymcc

  I need to power 16 IP phones over their Ethernet connections. I am in the process of changing our switches and only the phones need PoE, everything else is powered by mains cables. I have contacted the supplier of the phones and for 16 mains leads it will be close to £300. I know it's possible to get a PoE injector that goes between the mains and the phone but I would like to do this as tidily as possible and ideally in bulk. I imagine something that looks like a switch but doesn't actually 'switch' if that makes sense. Basically I want to inject power to 16 devices at once.

  Read the article

< Previous Page | 534 535 536 537 538 539 540 541 542 543 544 545  | Next Page >