Search Results

Search found 18766 results on 751 pages for 'me again'.

Page 539/751 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

• Why is my HP TouchSmart tx2 1025dx shutting down?

  - by Kristy

  I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

  Read the article

• Windows 7 misses keystrokes from internal keyboard after hibernation (on Acer Aspire 5820)

  - by ron

  I face a very strange symptom on my Acer Aspire laptop (with the factory default Win7 install and divers. Windows update running). After waking the computer from hibernation, it is a pain to type, since on average 5-10 keypresses are missing per 100 presses, using the laptop's keyboard. Steps to reproduce: 1) Power off 2) Power on, wait for system to become usable 3) Open notepad, for 5 times do hit 10x the same character. This gives a similar pattern of 50 chars total: xxxxxxxxxxyyyyyyyyyyaaaaaaaaaassssssssssdddddddddd 4) Optionally repeat. Everything is fine this far. 5) Hibernate. 6) Power on and resume. 7) Repeat steps 3)-4). This time approximately 3-5 character will be missing from each 50 characters. What I ruled out: putting to Sleep or just Locking and resuming from there does not cause problem battery / AC usage does not matter net connection does not matter running processes seem to be the same before and after hibernation key press speed doesn't really matter. For the test I use a nominal 3-5 strokes/second beat. plugging in an external USB keyboard works fine, but the built-in one still misbehaves What could be the problem? How could I diagnose if the keypresses arrive in, but get swallowed at some point? (maybe some nasty keyboard handler hook misbehaves?). Update: It seems that pushing the PowerSmart button and toggling to power saving state fixes the problem. Also, toggling it again back to the original state keeps it fixed. So this may be a fine workaround, but is not a conforming solution.

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look? Edit: SQL Server Version is 9.0.4035

  Read the article

• IE8 page reload hangs

  - by Rod

  When a 7mb HTM file is first opened (by clicking on the file icon or using Open With), both IE8 and Firefox display this browser file quickly. After the file is closed, Firefox will reopen this file quickly, but IE8 appears to hang during the reopen. Clearing the IE cache does not help. However, IE will reopen the file quickly again only if the File/Open/Browse feature of the menu bar is used (clicking on the file icon can be used only once between computer reboots). Testing suggests that the problem relates to the number of HTML hyperlinks pointing to another part of the file. There are many hyperlinks, but they are not a problem during the first load of the document (between computer reboots). What needs to be fixed to avoid use of the workaround? Using Windows XP SP3 Update 6/23/12 - Controlled testing shows that the number of hyperlinks is not the problem. The way this large file is opened is the difference: 1) from the IE menu bar, File/Open/Browse is consistent and fast (but not as fast as FF). 2) clicking on the file name in the folder (even when IE is the default program for this file type) causes a much delayed load of the file. Creating a smaller file demonstrates the delayed load, but verifies that the load eventually occurs.

  Read the article

• Comparing 128MB GeForce 8600GT and 512MB Radeon X1650

  - by Synetech inc.

  Hi, I'm trying to determine which is the better of these two video cards: 128MB Nvidia GeForce 8600GT card while the other has a 512MB ATI Radeon X1650 card. Both cards are the upper-level mid-range versions of their respective series. On the one hand, the ATI has substantially more VRAM, but the Nvidia supports D3D 10 and SM4.0 as opposed to D3D 9.0c/SM3.0 that the ATI supports. Also, I have always heard better things about Nvidia cards compared to ATI cards. I'm trying to find some advice on which one is better, but I can't find any actual comparisons or anything for these specific cards (the comparisons I can find are only similar ones like the X1650 Pro or 8600GT PCI-E), so I figure that what I need to know is whether the extra VRAM is that important. Looking at the ATI table and the Nvidia table seems to indicate that the Nvidia is better, but then again, the Nvidia table also says that the GeForce 8600GT is a PCI-E card with at least 256MB even though the card in question is an AGP with 128MB. (:-?) (It looks like the ATI card is not supported in Windows 7 while the Nvidia card is, which I suppose is also a factor, though not quite as immediately relevant as performance.) Any ideas? Thanks a lot.

  Read the article

• How much Ram should I need on my VPS package? Am I being ripped off?

  - by Tamerax

  Hello! So, I'm currently on a VPSVille Cpanel3 account that has 768 MB guaranteed ram and 2048 MB burst ram (full details here: http://www.vpsville.ca/cpanel-vps). It's running CentOS, Cpanel, Apache and FastCGI. On the server itself I have a joomla community site with a forum system that generally has about 20 people on it max at any point and even then, during the evening, no one. It's a pretty small site but has a number of modules running on it. It gets about 6000 visits a month. Also on the server is a wordpress site that gets about 80-150 visits a day, 2 other wordpress sites that aren't developed yet so they don't get any traffic at all and 2 static html websites that also only get about 500 hits a month. All in all, no huge sites. The issue is that I get "out of memory" errors fairly frequently and it kills my server and I need to reboot it in order to get all my sites up and running again. It seems to me that I shouldn't have these issues with that much ram allotted to my account and everytime I send in a support ticket, they just tell me to upgrade the ram. Now, I'm still pretty new to all this so I'm not a good judge of how much I really need for my sites to run. I don't know if my sites really do need this much OR vpsville has oversold there servers, they don't actually have those resources available and I'm getting ripped off. So, how much ram should I be using with my current setup? Thanks!

  Read the article

• Where does Firefox store cerificates and how to delete one?

  - by majid4466

  Hi all, The root cause of my problem is not known to me, whatever it is, I experience frequent DNS failures. When it happens I cannot browse to my Gmail inbox. I use two DNS settings. One is the public DNS server offered by OpenDNS, and the other is Google's free DNS server. When this happens I switch from the active setting to the other one and the problem goes away. But there is a side effect to this. When browsing to Gmail fails to load, after switching the DNS I receive an error saying the security certificate the site uses is only valid for OpenDNS. This my wild guess at what is going on: OpenDNS fails to resolve mail.google.com to its IP, My ISP sends me a page showing search results for 'mail.google.com' Since I have received some sort of page instead of a timeout, the browser, mistakenly, binds the certificate it has cached for 'mail.google.com' to the new domain. This search page is not served by https so not exception is thrown by the wrong binding After switching the DNS, the domain is correctly resolved to Gmail server's IP and since his is on https the handshake is triggered. Now, because of the wrong binding, which passed quietly as no handshake was involved, I receive the error saying the certificate used by 'mail.google.com' is only good for openDNS I don't know much about DNS, less about https and the process of establishing a secure connection. How correct is my explanation? How can I delete the wrong association and/or the certificate? Thanks for listening. P. S. The problem goes away by itself, but sometimes it takes several hours before Gmail works again.

  Read the article

• Where does Firefox store cerificates and how to delete one?

  - by majid4466

  Hi all, The root cause of my problem is not known to me, whatever it is, I experience frequent DNS failures. When it happens I cannot browse to my Gmail inbox. I use two DNS settings. One is the public DNS server offered by OpenDNS, and the other is Google's free DNS server. When this happens I switch from the active setting to the other one and the problem goes away. But there is a side effect to this. When browsing to Gmail fails to load, after switching the DNS I receive an error saying the security certificate the site uses is only valid for OpenDNS. This my wild guess at what is going on: 1. OpenDNS fails to resolve mail.google.com to its IP, 2. My ISP sends me a page showing search results for 'mail.google.com' 3. Since I have received some sort of page instead of a timeout, the browser, mistakenly, binds the certificate it has cached for 'mail.google.com' to the new domain. This search page is not served by https so not exception is thrown by the wrong binding 4. After switching the DNS, the domain is correctly resolved to Gmail server's IP and since his is on https the handshake is triggered. 5. Now, because of the wrong binding, which passed quietly as no handshake was involved, I receive the error saying the certificate used by 'mail.google.com' is only good for openDNS I don't know much about DNS, less about https and the process of establishing a secure connection. How correct is my explanation? How can I delete the wrong association and/or the certificate? Thanks for listening. P. S. The problem goes away by itself, but sometimes it takes several hours before Gmail works again.

  Read the article

• very diferent results from df after few seconds

  - by tatus2

  When the backup moves the files from one to the other server the results from df changing every some seconds in impossible manner. On source host is running rsync. On destination host I'm running every few seconds following command: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 as you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in so short time). After ~20 sec the cycle closes. I'm again roughly by the same usage as earlier. The value is reasonable ca. 35 Mb were copied. Can somebody explain me what is going on? Does df only make an estimation of usage instead of used value?

  Read the article

• Internet keeps connecting and disconnecting

  - by OmerPT

  I have a PC running 32bit Windows 7 Professional. My wireless internet card is Edimax EW-7128G, it is inside my computer case and it is connected to an antenna. My problem is: I have a wireless connection to my router, the signal is fine and it's not slow or anything, but it just keeps disconnecting every 30 seconds or so, then connects back, then it disconnects, then connects back and so on. This is new - it only started about a week ago, everything worked just fine until then. I know it's not a problem with the router because: Other computers can connect to it easily and they work just fine, no disconnections (My phone too). I know it's not a problem with the computer or the wireless card itself because: I have Ubuntu installed side-by-side with my Windows, and when I switch to Ubuntu the internet works great. This caused me to think it's probably a problem with the wireless card drivers installed on windows (Ubuntu auto-installed them, I installed them manually on windows): I tried uninstalling them, and then installing them back again, sadly that didn't help. I'm kind of lost here - can anyone think of anything else I should try? Thanks :)

  Read the article

• Connecting WD World Book to my new laptop using downloaded win 7 driver

  - by Jeanie

  HELP!!! I have just been reading through and seeing that you can connect using a USB straight to your laptop. This would be great is I actually had the cable! My problem is I have a lovely new laptop with windows 7 - I had to buy this as my old laptop isnt working anymore and I have just ordered an external sata enclosure to see whether I can get any inormation of the old drive and put onto my new laptop, so at least I don't lose any work. This in itself will probably present problems as my old OS was Windows XP! I will deal with that when i get to it!! My problem at present is that I have a World Book and I wish to connect and configure it to my new laptop but again I need to download drivers for Windows 7, which I believe I have done, but now I can't seem to work out just what to do next to help these 2 devices to recognize each other and configure. If anyone has any answers or could talk me through it I would be really grateful. Thanks - Jeanie

  Read the article

• Web Server slows down (ASP.NET)

  - by mfeingold

  below is a question I posted on stackoverflow . as suggested by Martin Clarke I also post it here. We have a really strange problem. One of the servers in the server farm becomes really slow. We see a number of timeouts in the logs and overall response time is not where it should be (and is on other servers in the farm). What is also strange is that it is not just the web app - Just logging into the server takes up to 1.5 min to show you the desktop. Once you are in, the system is as responsive as ever - unless you try to launch something, i.e. notepad - it takes another minute to launch and after launch it works fine. I checked a number of things - memory utilization is reasonable, CPU is below 15%, windows handles, event logs do not show anything. Recycling the aps.net process does not fix it - it still takes over a minute to log in. Rebooting the server helped, but now it started to slow down again. After a closer look we found out that Windows Temp directory is full of temp files - over 65k files. This is certainly something to take care of. But my question is could it be the root cause of the sluggishness, or there is still something else lurking in the shadows? Edit After more digging I am zeroing in on the issue related to the size of temp directories. This article: (see the original post this thing will not let me include a second link) describes something very similar. It still does not answer the question why the server is still slow even there is no activity.

  Read the article

• Wireless connection silently dies randomly

  - by Force Flow

  I have two WAP4410N wireless access points powered using Power-Over-Ethernet. They are both connected to the same LAN and broadcasting the same SSID with a WPA2 password. One is using channel 1, while the other is using channel 11. There is coverage overlap where the signal from both access points hover around -75db to -85db while standing in the same physical location. DHCP is disabled, and is being provided by another network device. Every day or so, devices can connect and authenticate to the access points, but are not granted an IP address (and subsequently are unable access to the LAN or Internet). For devices that had already retrieved an IP address prior to the issue exhibiting itself, the devices simply stop communicating with LAN and Internet. However, I can still access each access point's web admin interface from the LAN. If I reboot both devices, the problem vanishes and devices are once again able to get an IP address and connect to the LAN and Internet. Are these symptoms of signal interference between the two WAPs or is this a completely different issue?

  Read the article

• ip6tables blocking output traffic

  - by jmccrohan

  My OpenVZ VPS is blocking outbound IPv6 traffic, but correctly filtering inbound IPv6 traffic. Below is my ip6tables-restore script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT -A INPUT -p udp -m udp --dport 1194 -j ACCEPT -A INPUT -p tcp -m tcp --dport 51413 -j ACCEPT -A INPUT -p udp -m udp --dport 51413 -j ACCEPT -A INPUT -m limit --limit 5/min -A INPUT -j REJECT --reject-with icmp6-adm-prohibited -A FORWARD -j ACCEPT -A OUTPUT -j ACCEPT COMMIT ICMPv6 traffic is still able to pass both inbound and outbound. When I flush these rules using -F, outbound traffic flows fine. What am I missing here? EDIT: It appears that ip6tables is marking ESTABLISHED packets as INVALID. Consequently, the outbound traffic is NOT actually being blocked. The reply packets are not allowed inbound again, hence appearing like blocked outbound traffic. Allowing INVALID packets inbound solves the outbound issue, but also renders the inbound filter useless.

  Read the article

• Did Windows 7 Startup Repair trash My Documents?

  - by Metaphile

  Earlier today, I rebooted my computer. Partway through the boot process, it shut down suddenly. When I tried again, I was prompted to run Startup Repair, and I did. Afterwards, my computer booted normally and everything seemed to be in order. Then I noticed that my My Documents folder contains a mix of old and new files. On closer inspection, it appears that Windows has reverted my system to a previous state. Two things puzzle me: 1) According to Microsoft, "System Restore does not affect personal files, such as e-mail, documents, or photos [...]", yet many of my personal files have been affected. 2) Why were some things reverted, but not others? I had recently reorganized a bunch of files in My Documents. The reverted directory structure seems to be a hybrid of old a new, with a lot of new stuff missing. It's hard to say for sure, but it looks like the stuff that's missing would have been in conflict (two folders with the same name, for example), and Windows favored the old stuff. Is this normal behavior for Startup Repair/System Restore? To modify personal files, I mean? Is there a pattern to the mess it's made of My Documents?

  Read the article

• Access denied when trying to open files/folders after reinstall [closed]

  - by user711532

  Possible Duplicate: Access Denied when saving a file in Windows 7 I installed Windows 7 fresh on a new machine. Now when I unarchive (winrar or 7z etc. ) to Program files (x86) (for example), access denied. Even if I copy a file to a folder I installed an app to it is still access denied. I checked the security, it looks like full control is given to the creator - this is weird as I never ran across this before (same version of Windows 7 - its just a fresh install after some new hardware). It is the same effect as if I was editing the hosts file, and you do not use "run as admin" you will not be able to save it, yo will have to save it somewhere else. This "file copy" issue I ran into is the same. I could change all these permissions, however this is something I never had to do before. I am the admin, why did the install, not give me "full control"? How can this be globally fixed. I cannot change the permissions - they are greyed out - so that is weird as well. If I was a standard reason, It would make sense, however, again, I am the admin.

  Read the article

• Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?)

  - by Robert

  Which Windows 8 tool should I use to "read", "upload", my Windows 7 latest backup DVD (is it possible?). I've just installed W8 and haven't made any changes to my new ecosystem and, what happened was that, as I was managing my new drivers, some mess* occurred, I confess, and now what I have left is every single backup tool I made use of W7, like system images, restore dvds, backup up to date monthly and so on, and would like to keep in touch with W8. I'm one of those with problems managing the amd switchable gpu drivers. Now I want to stay with W8 (download version - didn't clean install) but with my old personal files. I don't care to programs updates. I got everything original on dvds, of my interest. Yesterday I tried refreshing W8 once but didn't work. Maybe trying again tonight. What would you guys do in my place, please? *the mess I am talking about is to have disabled my intel (the only driver left) gpu in device manager tool in W8. I got black screen on system boot. Cheers, C.C.

  Read the article

• Cannot open /dev/rfcomm1 : Host is down

  - by srj0408

  I am working on raspberry PI and on Bluetooth. I am using old raspberry pi kernel as the new one has got some bugs that were not resolved with respect to the bluez daemon. At present my kernel version is 3.6.11. I am using a USB bluetooth dongle and my sole purpose is to auto connect the bluetooth dongle when ever it is in range. For that i think i have to run a script in the backend on RPI that will keep on checking the existence of usb bluetooth dongle. I started from the very scratch. I installed bluez daemon using apt-get install bluetooth bluez utils blueman and then i used hciconfig which gives me that my bluetooth usb dongle is working fine. But when i did hcitool scan , it give me no device in range even though my Serial bluetooth Device was on. I wasn't able to find any device in vicinity. Also when i unplugged and plug the USB dongle again, i was able to scan the serial device , but when i repeat the process, i find the earlier condition of not finding any deice. I had find another useful link, but that need address of the bluetooth device that need to be connected. I want to automate this using hcitool scan, storing the output to the a file and then comparing it with already paired devices and their name. For that i need to figure out why hcitool scan is sometime working and sometime not. ? Can some one help me in figuring out why this is happening. Is there any problem on hardware side i.e Bluetooth dongle is buggy or i had some problem in bluez utils. Edit 1: While as of now, hcitool scan is giving me my remote device address but still i am getting the same issue of HOUST IS DOWN, '/dev/rfcomm1'. I am really not getting any idea of what to be done.

  Read the article

• In Windows 7 is there a way to login from any user account and see the same workspace and be able to use the running programs of another user?

  - by WickedMongoose

  Our group has a number of Test Stands with PCs that are currently being accessed with a single group login. It has been sent from on high that this is not the way to do things for security reasons and we all agree. However. Multiple team members from around the world log into these Test Stands and need to be able to access programs that have been run from what would be different user profiles if we were to no longer have a single common login. Is there a way to have a common workspace such that when different users login, they will be able to see and interact with all running applications as if they were using a common login? Applications that we run link to and monopolize hardware resources connected to the PC and it is time consuming to restart and reload settings every time a new user logs in. Even if the program did not monopolize the hardware many of these programs are resource intensive and require a large portion of each machine's RAM to run, so trying to run the application again when it is already running from multiple user accounts would quickly consume all system resources. Simple Example: I open a chrome browser while logged into our pc. I then logout and another team member remotes in and should be able to see my open browser and be able to interact with it as if he were the one who opened it. Any alternative process flows or solutions from someone who has gone through a similar transition would be appreciated. This is not a request for how to give all users access to the ability to run a program, but it is the request for how to allow all users access to interact with running applications that have been started by other users and need to be interacted with as if the new user started and has control of the application.

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

• Is it possible (and how if it is) dump two concatenaded disks in a new disk using DD?

  - by pedromarce

  Hi, I have a Lacie enclosure that has a setup with 2 500gb disks configured as 1 drive of 1TB, the only partition created for the whole drive is HFS+ journaled, but the controller in the enclosure is gone and so the drive refuses to mount anymore. I have been able to remove those two disks from the enclosure and connect them using USB ports and a program called R-studio (Raid recovery program) check that the setup the controller in the enclosure was using was both disks concatenated (Not Striped). And so configuring that option in R-studio I could be able to get back all the information. But before I got a license for r-studio for just one use, I would rather buying a new 1TB disk and try to write all the information of those two disks in this new one. I can use Mac or linux machines to do it, and I think it should be ok use DD command in linux to concatenate those two drives into the new one in the right order to get it working again in the new disk and I will reformat the old ones, but I am not sure. So, is it possible in this scenario to write both disks into a new one using DD? Any hints how the command would look? Thanks,

  Read the article

• Windows 8 doesn't start up after installation

  - by Raj BD

  I have a DELL INSPIRON n5110 machine running Windows 7 Home Premium 64-bit. It has 6GB of RAM and 500 GB hard disk capable to run any Windows and Linux system. And I recently attempted to install Windows 8 in the machine. Installation goes fine and smooth until the final stage when windows is done installing and GETS DEVICES READY. When GETTNG DEVICES READY reaches about 60%, the screen goes blank with the machine running. After a while it reboots. And after the new Windows Logo with dotted circles are done showing up, the screen goes blank again (when we'd expect login screen to show up). There is not even a cursor. I can see the HARD DISK ACTIVITY LED blinking but nothing shows up in the screen. I've tried CLEAN INSTALL several times. The DVD is fine, it installed and worked well in my friends' laptop PCs. I tried installing both PRO version and ENTERPRISE version and both 32-bit and 64-bit. But the problem was same everytime. Finally, I had to reinstall Windows 7 which installed and ran without any problem. The problem, we can guess, is GRAPHICS perhaps. I have Intel SandyBridge Graphics Mobile Chipset (Intel HD Graphics 3000). But if Windows 7 and Linux distrubutions like Mint and BackTrack can run on the machine, why on earth, would Windows 8 not run?

  Read the article

• Mysql Replication out of sync? What commands do I run to sync it back up?

  - by Alex

  I have a master-master replication system. However, due to an auto-increment issue, I got an error in replication...and it stopped replicating. Someone told me to do: stop slave; SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 1; start slave; It didn't work. Then they told me to do: SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 2; It didn't work. Then to test it out, I did: SET GLOBAL SQL_SLAVE_SKIP_COUNTER = 99999; It starts, but it is not updating. I created a table on DB1...and it is not showing up on DB2... Below are the SHOW STATUS for both my DB1 and DB2 (I hit them together): mysql> show master status\G *************************** 1. row *************************** File: mysql-bin.000605 Position: 2019727 Binlog_Do_DB: Binlog_Ignore_DB: 1 row in set (0.00 sec) mysql> show slave status\G; *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: Master_User: Master_Port: Connect_Retry: 60 Master_Log_File: mysql-bin.000605 Read_Master_Log_Pos: 2008810 Relay_Log_File: mysqld-relay-bin.001731 Relay_Log_Pos: 10176595 Relay_Master_Log_File: mysql-bin.000470 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 4255373725 Exec_Master_Log_Pos: 10176458 Relay_Log_Space: 135062517347 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 1376343 1 row in set (0.00 sec) How do I fix it so that they sync back up again? Thank you.

  Read the article

• Looking for a nice and handy bandwidth limiter

  - by Spirit

  Here's the thing. My ISP are f*gs. Most of the time the network is realy good, but then again there are times when it sucks. They say we have 20mbp/s. Me and my brother are usually playing dota and it's fine. One of us plays the other's watching streaming or both of us are playing or something like that. But sometimes like one of these days one is lagging even if the other is watching youtube at 360p quality. So I do know that there are many bandwidth limiters out there. But what could you recommend given my situation. I like both of us to be able to install it and it would be good idea to have something like ON/OFF switch. When he is not here I would like to turn that thing off. But when one of us plays I would like to turn it ON and whatever I do, to be limited to 10 or 8mbps. That way we will not interrupt each other. Thanks guys :)

  Read the article

• Configure Web app for external access (IIS7), allowing only certain users via AD group. All users need internal access

  - by White Island

  We have a Web app running in IIS7 (Server 2008 R2). I now need to allow external access with an SSL certificate, so certain users (e.g. the owner of the company) can use it remotely without VPN. They want to roll out the external access only to those specific users at first (thinking: a Windows credential prompt), BUT everyone will still need access internally (HTTP), without the prompt. I have the SSL cert installed on the server and public DNS configured. I've been trying to figure out how to work the authentication/authorization. I was thinking I need to disable Anonymous authn and set Windows authn, then I keep coming back to 'URL Authorization' in my research for the group setting; however, when I tried URL authz, (removed allow all, added allow rule for the special group), it broke the site internally (403.2 Forbidden, I believe it was). I thought maybe setting up a second site in IIS pointing to the same program would work, but the exact same thing happened (and again with a new app pool, just for kicks). So I guess my question is, how would you do this: allow external access, limited to users in a specific AD group, while still allowing internal access without a credentials prompt? How do I separate the external HTTPS and internal HTTP authorization requirements? Will I need to just copy the entire contents of the app in Windows Explorer to a new folder and create my external site from that? Is Windows authentication the correct option for this? I did come across this, which refers to creating a custom module. While it sounds like a solution, it's not one I'm familiar with, and I just wondered if there is a simpler way to get it to work: http://forums.iis.net/p/1182792/2000775.aspx Thanks!

  Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >