Search Results

Search found 46352 results on 1855 pages for 'super nathan'.

Page 539/1855 | < Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >

  • Generic socket 940 CPU fan interchangeable with HP part number 411454-001

    - by ConcernedOfTunbridgeWells
    Hi, I'm trying to find a generic CPU fan that will fit the air duct in an XW9300. Note that there are two CPU fan mounting schemes used on this machine. One with two grommets in the motherboard that the CPU fan screws into and one with a plastic collar and base plate. The form factor I'm looking for is the former (see picture below): Two HP part numbers for fans in this form factor are 411454-001 (shown below) and 416055-001. Note that the dimensions are important as the machine has an air duct that fits over the fan. Can anyone tell me the manufacturer and model of an equivalent generic part? Better yet, do you know somewhere (preferrably in the UK) that I can obtain such an item from?

    Read the article

  • Mini DisplayPort -> DVI -> VGA ?

    - by ibz
    I have a Mini DisplayPort to DVI adapter which I use to connect my MacBook to a screen that has DVI input. I also have a screen with VGA only input which I want to be able to use, so instead of buying yet another expensive Apple adapter (the Mini DisplayPort to VGA), I just got a cheap DVI to VGA, so I can do Mini DisplayPort - DVI - VGA. It doesn't seem to work though. The screen just says "no connection". Does anyone know if this is actually supposed to work (and my DVI - VGA is just broken), or is this simply not supported and I need to get the expensive Apple Mini DisplayPort to VGA? Thanks!

    Read the article

  • private address in traceroute results

    - by misteryes
    I use traceroute to check paths on a remote host, and I notice that there are some private IPs, like 10.230.10.1 bash-4.0# traceroute -T 132.227.62.122 traceroute to 132.227.62.122 (132.227.62.122), 30 hops max, 60 byte packets 1 194.199.68.161 (194.199.68.161) 1.103 ms 1.107 ms 1.097 ms 2 sw-ptu.univ.run (10.230.10.1) 1.535 ms 1.625 ms 2.172 ms 3 sw-univ-gazelle.univ.run (10.10.20.1) 6.891 ms 6.937 ms 6.927 ms 4 10.10.5.6 (10.10.5.6) 1.544 ms 1.517 ms 1.518 ms why there are private addresses near the host? what are the purposes that these private addresses are used? I mean why they want to put the public IP behind private IPs? thanks!

    Read the article

  • Is there a way to make my Windows know about my BIOS settings?

    - by Diogo Rocha
    For a very specific situation on a project, I need to make a Windows machine know about some specific settings at the BIOS(such as Enabled/Disabled PXE boot, Boot Sequence, Bios Version, and more....). I'm thinking in doing this with powershell, VBScript, or whatever(actually doesn't matter how, I just need to read these settings from Windows). I'm reseaching this and found nothing for now, there is a way(maybe a indirect one)?

    Read the article

  • Set up ad hoc wireless connection between Windows Vista and Mac OS X

    - by Skarab
    I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

    Read the article

  • Closing laptop lid and using external display causes mouse to move on it's own

    - by PolishHurricane
    I plugged my ASUS Taichi Laptop into an external monitor via the VGA Adapter that it comes with. It was working fine, but then I configured a power option so I could shut the lid without it going to sleep (so I could use just the external monitor with an external keyboard/mouse). Problem is though, now, when the lid is closed and I move the mouse, the mouse is moving around on it's own, but when I open the laptop lid back up, the mouse is fine. I looked under the lid when it was closed and the display properly shuts off on the laptop. It's not the external mouse/keyboard because I completely unplugged them and it was still happening. Nobody is hacking me or anything, I totally went into airplane mode/pulled the wire. I have a touchscreen, but I put a piece of paper over it and it wasn't doing it. I was thinking it might be the trackpad being touched somehow by the screen when the lid is closed? But I went into windows 8 control panel options and I couldn't find anywhere to disable it (it sees the USB mouse I think).

    Read the article

  • How do I backup Firefox add-on like "Fastdial" addon for a reinstall?

    - by danacon
    I am doing a new install of Firefox and over the years my Windows "roaming folder" I use for backup has gotten all clogged up from so many add-ons and crap... I want to backup just a couple Firefox add-on's, one is "Fast dial" How do I backup this add-on and its addresses for when I reinstall Firefox and the add-on, so It will go back to where it is now? Most add-on's have a backup feature like "too many tabs" bookmarks and such but fast dial doesn't? so How do I backup this add-on? and /or addons like it without a backup feature? Thanks in advance any help or options would be a big help. Dana

    Read the article

  • How to measure disk-performance under Windows?

    - by Alphager
    I'm trying to find out why my application is very slow on a certain machine (runs fine everywhere else). I think i have traced the performance-problems to hard-disk reads and writes and i think it's simply the very slow disk. What tool could i use to measure hd read and write performance under Windows 2003 in a non-destructive way (the partitions on the drives have to remain intact)?

    Read the article

  • dialup connection script

    - by BParker
    I've just started working for a company who produce a specialist modem. In the test department they simulate actual use with a bunch of pc's acting as clients connecting over this modem. As such each needs to dial a set of dial-up connections. Each of these has to be created manually, and currently takes quite a while on each machine, so i was hoping to be able to automate the creation process. Back in the early days of the internet i remember getting CD's from ISP's where the dial-up connection was configured automatically, and i was wondering if anyone lknew how to do this, or if they could point me in the direction of a tutorial about it. To be clear, i don't want to automate actually dialing the connection, but i do want to run a script which creates the icons in the networking applet that allows us to dial these connection. Thanks in advance!!!

    Read the article

  • Dropbox alternative with local sync support?

    - by srid
    I am currently using Dropbox. Just decided to sync my huge (about 5 GB) iTunes Library (music collection) in Dropbox. For that I must subscribe to their paid account. But before I do so, I'd like evaluate the alternatives. Is there an alternative that does this? Local LAN sync (eg: sync my huge music collection across computers in local network without uploading/downloading them to internet) The following would be nice (but not required): Native android client - so music will be made available in the Android music app / SDHC card Selective sync: sync particular folders / exclude certain folders on certain computers .. eg: excluding porn folder on work computers ;-) Just like Dropbox, it MUST work on 64-bit Windows, Linux and Mac. Know of any? (I am currently evaluating Spideroak. Boy, was it so complicated to use?)

    Read the article

  • Thinking about buying a LG 30" monitor

    - by evan
    I'd love to get http://www.newegg.com/Product/Product.aspx?Item=N82E16824005115 but I'm wondering if I should hold out until more LED monitors are on the market. I love really like the brightness of the 27" imac monitor and the above monitor is only rated at 5 cd/m2 less than that monitor, but wouldn't a back lit monitor appear to be much brighter than an LCD monitor? Does anyone know how the above monitor compares to the 27" imac monitor? Why are Apple monitors in general so much more expensive than other monitors - just the brand name? I must be confused about how to read the specs? Thanks in advance for your input!

    Read the article

  • Windows 7 and XP Networking

    - by David-Zazeski
    I'm trying to setup a home network between a windows 7 and windows xp machine. I have a small hub. My XP computer has a manually assigned IP address (192.168.0.10) and I set my Windows 7 machine to have a manually assigned IP address (192.168.0.15). The XP computer works, but the Windows 7 machine does not see the network. It says that there is no connectivity. Ping does not work from either machine. Does anyone have any suggestions?

    Read the article

  • Links not opening in Windows 8 applications

    - by Martin Brown
    I have just upgraded my laptop from Windows 7 Ultimate with IE9 to Windows 8 with IE 10. When ever I try to open a web link in an application nothing happens. For example in the Windows 8 mail application it makes the email address in an email look like a link. When I click on these with the mouse the link changes to look like I have clicked on it, but aside from that nothing happens. I have tried making sure that IE 10 is my default web browser and been into IE10's settings and associated it with all the usual file types, but still no success. Has anyone got any ideas what might be causing this? I have a feeling this started when the Browser Choice update ran. I couldn't select which browser to install in that either. The install buttons just flashed when I clicked them and then nothing. PS I would have added an IE10 tag to this post, but apparently I don't have the reputation required to do so.

    Read the article

  • How to set up multiple SSIDs with bandwidth limiting on a single wireless router?

    - by Rahul Narain
    I have an Asus WL-520GU wireless router connected to a cable modem that I use for wireless internet access in my apartment. I would like to set it up so that it provides two SSIDs: one secured and password-protected for my regular use, and a "guest" SSID that's unsecured but throttled to, say, 10% of the available bandwidth. What is the most straightforward way to do this? I've been looking into DD-WRT and Tomato, both of which support my router. DD-WRT supports setting up multiple SSIDs using the GUI, but I don't know if it's possible to limit the bandwidth of each SSID independently; point #12 in this FAQ thread says it's not possible to limit by day or by MAC address, which is discouraging but not conclusive. Tomato allows bandwidth limits in its QoS settings, going by the screenshot here, but multiple SSID support is still experimental and it doesn't look like it will work with the encryption settings or bandwidth limits in the GUI. I'd like to know a good way to do this which gives me the fewest opportunities for screwing up. I'm no stranger to the command line, if that turns out to be what's necessary, but if so, please explain what the commands are doing because I don't have a good mental model of what needs to happen to set this up.

    Read the article

  • A star vs internet routing pathfinding

    - by alan2here
    In many respects pathfinding algorythms like A star for finding the shortest route though graphs are similar to the pathfinding on the internet when routing trafic. However the pathfinding routers perform seem to have remarkable properties. As I understand it: It's very perfromant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, theres never any doubling back for example. IP addresses don't have to be geographicly nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router dosn't have to store a list of all the addresses each of it's directions leads most directly to. I can't find this information elsewhere however I don't know where to look or what search tearms to use. I'm looking for a basic, general, high level description to the algorithms workings, from the point of view of an individual router.

    Read the article

  • Rainmeter customization issues, pretty basic

    - by user62865
    I'll admit it; I'm new to using Rainmeter. What I want to do is create two panels (one left, the other on the right) that mirror one another. One side I want to work for the Eastern US while the other for the UK. I want to keep digital clocks, the same style etc., on both sides with their respective time zone. On top of this I want to have weather reports for the whole day (Current weather and temp, morning, afternoon, and night) for each location. However, I have not been able to find any skins which allow this. For whatever reason every time I try to load a skin for a clock I can only load it for one clock of that type and I'm having the same issue with the weather skins. Could anyone please tell me what skins I should look at and how to get a mirrored look?

    Read the article

  • Windows periodically disconnects, reconnects to the network

    - by einpoklum
    My setup: I have a PC with a Gigabyte GA-MA78S2H motherboard (Realtek Gigabit wired Ethernet on-board). I have the latest drivers (at least the latest driver for the NIC. I'm connecting via an Edimax BR-6216Mg (again, wired connection). For some reason I experience short periodic disconnects and reconnects. Specifically, Skype disconnects, tries to connect, succeeds after a short while; incoming SFTP sessions get dropped; using a browser, I sometime get stuck in the DNS lookup or connection to the website and a page won't load. A couple of seconds later, a reload works. All this happens with Windows XP SP3. With Windows 7, it also happens. (When I initially wrote this question I didn't notice it.) ipconfig for my adapter: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : 00-1D-7D-E9-72-9E Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DHCP Server . . . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.117.235.235 62.219.186.7 Lease Obtained. . . . . . . . . . : Saturday, March 10, 2012 8:28:20 AM Lease Expires . . . . . . . . . . : Friday, January 26, 1906 2:00:04 AM A result of some tests a couple of the disconnects: C:\Documents and Settings\eyalroz.BAKNUNIN>nslookup google.com DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 192.117.235.235: Timed out DNS request timed out. timeout was 2 seconds. *** Can't find server name for address 62.219.186.7: Timed out *** Default servers are not available Server: UnKnown Address: 192.117.235.235 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to UnKnown timed-out C:\Documents and Settings\eyalroz.BAKNUNIN>ping 194.90.1.5 Pinging 194.90.1.5 with 32 bytes of data: Control-C ^C C:\Documents and Settings\eyalroz.BAKNUNIN>tracert -d 194.90.1.5 Tracing route to 194.90.1.5 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.254 2 * * 11 ms 10.168.128.1 3 14 ms 13 ms 14 ms 212.179.160.142 4 * * * Request timed out. 5 * * * Request timed out. 6 * * 47 ms 62.219.189.169 7 31 ms 27 ms 32 ms 62.219.189.150 8 15 ms 14 ms 16 ms 192.114.65.202 9 15 ms 15 ms 11 ms 212.143.10.66 10 13 ms 29 ms 31 ms 212.143.12.234 11 35 ms 15 ms 18 ms 212.143.8.72 12 22 ms 22 ms 16 ms 194.90.1.5 I usually ping 194.90.1.5 (which is not at my ISP) with 15ms response time and no losses. Things I've done/tried: [2012-03-26] I replaced the cable; I thought that made a difference, but the disconnects were back a while later, so that wasn't it. Updated the NIC driver. Tried reducing the MTU (used a utility called Dr. TCP); there was no effect. I updated my board BIOS revision (which caused all the HW to be "reinstalled" or re-identified - successfully). I installed another NIC, and tried switching to it - same effect with the on-board NIC. A while back I tried another router (although it was an Edimax model) - same problem. Connected the computer directly, with no router. Same problem. ping -t to the router (192.168.0.254) gives pongs, nothing is lost, and time is < 1 ms almost always (sometimes it says 1 or 2 ms). This is the case also during the disconnects.

    Read the article

  • In an application, are there multiple permissions that acess internet?

    - by user164945
    In an application, are there multiple permissions that acess internet? Could only part of an application be denied a certain permission, such as internet? Could only the part of the application that is spyware be denied internet permissions, Such as through modifying the files that connect to the internet? spyware X no internet acess (internet) (read) (write) (sound or harware) | permission 1 | permission 2 | permission 3 | permission 4 |

    Read the article

  • Eclipse Juno failing to start with Java returning 1 error report

    - by Richard Lewin
    I have been using Eclipse Juno on windows 8 without any issues until yesterday when, upon starting Eclipse it shows the initial splash screen and then shows the following message: Eclipse Java was started but returned exit code=1 C:\Windows\system32\javaw.exe -Dosgi.requiredJavaVersion=1.5 -Dhelp.lucene.tokenizer=standard -Xms40m -Xmx384m -XX:MaxPermSize=256m -jar C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar -os win32 -ws win32 -arch x86_64 -showsplash C:\Program Files\eclipse\plugins\org.eclipse.platform_4.2.0.v201206081400\splash.bmp -launcher C:\Program Files\eclipse\eclipse.exe -name Eclipse --launcher.library C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher.win32.win32.x86_64_1.1.200.v20120522-1813\eclipse_1503.dll -startup C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar --launcher.overrideVmargs -exitdata 13f4_5c -product org.eclipse.epp.package.java.product -vm C:\Windows\system32\javaw.exe -vmargs -Dosgi.requiredJavaVersion=1.5 -Dhelp.lucene.tokenizer=standard -Xms40m -Xmx384m -XX:MaxPermSize=256m -jar C:\Program Files\eclipse\plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar OK At this point Eclipse does not load any further. I have attempted to re-install the Java JDK and JRE without having any effect. I have also re-downloaded Eclipse Juno and run it as a 'fresh' startup which has until now worked initially yesterday

    Read the article

  • Best video codec for filmed powerpoint presentation

    - by rslite
    I have some presentations that are filmed. The audio is the presenter and the video is all the Powerpoint slides (size 1024x768, video codec H264, audio codec AAC). I would like to reduce their final file size since a 1 hour presentation is about 800 MB. Most of it is the video part which as I said is mostly powerpoint slides that don't change much over a matter of several seconds. Which codec would be better suited to encode this images and reduce the size of the end file?

    Read the article

  • How to fix display on external Samsung Syncmaster shifted to the right when connected to Macbook Pro?

    - by joe larson
    Is there something special I need to do to be able to use external LCD displays with my new MacBook Pro? Do I need extra software, or do I possibly need a different cable? I'm attempting to use an external display with my MBP. I've got a "Mini DisplayPort to VGA Female Adapter for Mac", plugged into the thunderbolt port on my MBP, which I understood should be compatible with thunderbolt. I've tried this with three different SyncMaster models: a B2330 (21.5"), a EX2220 (22"), and a third (also 22" ish) which I don't have the model # for -- but all are 1920x1080 resolution; plus an additional HP monitor of similar size and resolution. In all four cases, the MBP recognizes the screen and choses the correct resolution. However, the display is shifted over about 1 inch. This is true no matter if I change screen resolutions also. The controls on the monitor for horizontal position don't help. Also, sometimes (especially if I drag an app over into the second screen), the screen starts skipping left to right and having bands of fuzz. Additionally, the monitor will periodically blink off for a moment, trying to switch from Digital to Analog and back (the Syncmaster shows text on the screen to tell you it's trying to do this). Often when it comes back from one of these blank-outs, it will show OK (no skipping or fuzz) but still shifted right; then after a few seconds it will go wrong again skipping and fuzzy. This photo shows the worst of it. I've added red rectangles to show the physical edge of the screen, and a yellow rectangle to show the empty space on the left of the screen. (Sorry for the awful quality and lighting!) Also, it's worth noting I am on Mac OS X 10.6.7, and yes I have this update 1.4 installed.

    Read the article

  • missing NTLDR / no CD drive recognition

    - by Daems
    I formatted C: after installing win 7 on F: partition. on startup reported missing NTLDR changed boot seq to CD. only bleep sounds and failing boot. I could try to put the files on a USB stick and boot, but are there better options ?

    Read the article

< Previous Page | 535 536 537 538 539 540 541 542 543 544 545 546  | Next Page >