Search Results

Search found 2178 results on 88 pages for 'handles'.

Page 54/88 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

• netlogon errors

  - by rorr

  I have two instances of mssql 2005 and am using CA XOSoft replication. The master is a failover cluster and the replica is a standalone server. They are all running Server 2003 sp2 x64. Same patch levels on all servers. This setup has worked great for several months until we recently restricted the RPC ports on both nodes of the master(5000 - 6000 using rpccfg.exe). We have to implement egress filtering, thus the limiting of the ports. We began receiving login errors for sql windows authentication and NETLOGON Event ID: 5719: This computer was not able to set up a secure session with a domain controller in domain due to the following: Not enough storage is available to process this command. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. We also see group policies failing to update and cluster file shares go offline at the same time. The RPC ports were set back to default when we started seeing these problems and the servers rebooted, but the problems persist. The domain controllers are not showing any errors. Running dcdiag and netdiag shows everything is fine. We have noticed that the XOSoft service ws_rep.exe is using a lot of handles(8 - 9k), about the same number that sqlserver is using. As soon as xosoft replication is stopped the login errors cease and everything functions correctly. I have opened a ticket with CA for XOSoft, but I'm not sure that the problem is actually xosoft, but that it is the one bringing the problem to light. I'm looking for tips on debugging RPC problems. Specifically on limiting the ports and then reverting the changes.

  Read the article

• IP6 seems to be enabled - How do I configure it without interfering with IP4?

  - by Mister IT Guru

  I noticed that some of my Centos boxes have IP6 enabled, and seem to have addresses. I have no problem with this, but I would like to get a handle on it, and even connect to them using IP6. This would really help if for any reason DHCP has a hiccup. But I'm a bit lost as to where the configuration on my CentOS box is. (I am also on google researching this, but I like server fault! :) ) I am hoping that I would be able to log into this via the VPN because every now and then that DHCP device has a bad morning, and needs to be restarted. (I'm also looking into this issue, but someone else handles that, management separation gone mad!) It's a remote client, so it would be a lot easier for me to connect to these systems which seem to self configure, to use that as a pivot via ssh tunnels to get to other remote devices to continue to manage them, while out main route is fixed. I guess, my questions are How can I configure IP6 without interfering with IP4, and On CentOS, can I influence this auto configuration I seem to be seeing?

  Read the article

• Allowing non-admin users to unstick the print spooler

  - by Reafidy

  I currently have an issue where the print que is getting stuck on a central print server (windows server 2008). Using the "Clear all documents" function does not clear it and gets stuck too. I need non-admin users to be able to clear the print cue from there work stations. I have tried using the following winforms program which I created and allows a user to stop the print spooler, delete printer files in the "C:\Windows\System32\spool\PRINTERS folder" and then start the print spooler but this functionality requires the program to be runs as an administrator, how can I allow my normal users to execute this program without giving them admin privileges? Or is there another way I can allow normal user to clear the print que on the server? Imports System.ServiceProcess Public Class Form1 Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click ClearJammedPrinter() End Sub Public Sub ClearJammedPrinter() Dim tspTimeOut As TimeSpan = New TimeSpan(0, 0, 5) Dim controllerStatus As ServiceControllerStatus = ServiceController1.Status Try If ServiceController1.Status <> ServiceProcess.ServiceControllerStatus.Stopped Then ServiceController1.Stop() End If Try ServiceController1.WaitForStatus(ServiceProcess.ServiceControllerStatus.Stopped, tspTimeOut) Catch Throw New Exception("The controller could not be stopped") End Try Dim strSpoolerFolder As String = "C:\Windows\System32\spool\PRINTERS" Dim s As String For Each s In System.IO.Directory.GetFiles(strSpoolerFolder) System.IO.File.Delete(s) Next s Catch ex As Exception MsgBox(ex.Message) Finally Try Select Case controllerStatus Case ServiceControllerStatus.Running If ServiceController1.Status <> ServiceControllerStatus.Running Then ServiceController1.Start() Case ServiceControllerStatus.Stopped If ServiceController1.Status <> ServiceControllerStatus.Stopped Then ServiceController1.Stop() End Select ServiceController1.WaitForStatus(controllerStatus, tspTimeOut) Catch MsgBox(String.Format("{0}{1}", "The print spooler service could not be returned to its original setting and is currently: ", ServiceController1.Status)) End Try End Try End Sub End Class

  Read the article

• Apache server rewrite rules: how to avoid "implicitly forcing redirect (rc=302)"?

  - by Olivier Pons

  Hi! I've got a very annoying problem: our webserver handles 2 (more actually but let's say 2 for a simpler example): pretassur.fr pretassuragentimmobilier.fr Here's what I want to do: change (whatever1).pretassuragentimmobilier.fr(/whatever2) to (whatever1).pretassur.fr(/whatever2)?theme=agentimmobilier So here's my rewriterule: RewriteCond %{SERVER_NAME} (([a-z]+\.)*)pretassuragentimmobilier.(fr|com) RewriteRule ^(.+) http://%1pretassur.fr$1 [E=THEME:pretassur_agent,QSA] # if THEME not empty, set it : RewriteCond %{ENV:THEME} ^(.+)$ RewriteRule (.*) $1?IDP=%{ENV:THEME} [QSA] The big (huge) problem is: let's have a look at the rewrite logs: [pretassurmandataireimmo.com] (5) => setting env variable 'THEME' to 'pretassur_mandataire' [pretassurmandataireimmo.com] => (2) implicitly forcing redirect (rc=302) with http://pretassur.fr/ Aaaaaaaaarg! "implicitly forcing redirect" = I don't want that ! I want to internally redirect to pretassur.fr, not to make a real redirect! Now if you type: http://pretassurmandataireimmo.com it is redirected to http://pretassur.fr/?IDP=pretassur_mandataire (try it) I don't want that! I want to display this page http://pretassur.fr/?IDP=pretassur_mandataire but without touching the original host! Any idea? Thanks a lot!

  Read the article

• Missing drive space in Server 2003

  - by Tim Brigham

  I have two drives used for SQL backups which for the last week have been acting strange - the free space indicated by windows is far off from what windirstat, etc indicates. There should only be about 60 GB of drive space used and there is about 160. This would match the utilization if the two last backup files were still residing on disk. SQL server is 2000, OS Server 2003 x64. Running on a VMware 5.0 cluster. OSSEC and McAfee for this system shows clean. My current plan is to temporarily attach one of these drives this drive to another VM for analysis. Is there anything more I should be looking at? There were a lot of pages on the net when I was looking for documentation on this issue but I haven't found this case described. EDIT: Unfortunately even a full reboot did not clear this behavior. I also used process explorer to look for open file handles. No dice.

  Read the article

• How to prevent Gnome-shell's Alt+Tab from grouping windows from similar apps?

  - by wleoncio

  I love pretty much everything about how Gnome Shell handles app-switching through Alt+Tab. My one gripe with it, though, is how it forces the user to use Alt+` to switch between windows of the same app. This is very annoying for me, because now I have to keep in mind if the last window I was using belonged to the same app as the current window or not. Definitely a nuisance for power users who thinks in terms of "windows I'm working with" instead of "applications I'm working on". I've tried the AlternateTab extension ( https://extensions.gnome.org/extension/15/alternatetab/ ), but it's looks way too ugly for me. Not to mention that in the end all I want is to remap Alt+(key above tab) to Alt+Tab on this application. I guess one option would be to just tweak Gnome-shell. My guess is that I should tinker with the altTab.js file at /usr/share/gnome-shell/js/ui/, but the file is too long and overwhelming for someone like me, who doesn't know JavaScript. Does anyone know how I can make Gnome Shell stop grouping windows by applications?

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• Are there any viable DNS or LDAP alternatives for distributed key/value storage and retrieval?

  - by makerofthings7

  I'm working on a software app that needs distributed decentralized name resolution, and isn't bound to TCP/IP. Or more precisely, I need to store a "key" and look up it's value, and the key may be a string, a number, or any other realistic data type. Examples: With a phone number, look up a name. (or with an area code, redirect to the server that handles that exchange) With an IP Address get a DNS name, or a Whois contact (string value) With a string, get an IP, ( like a DNS TXT or SRV record). I'm thinking out of the box here and looking for any software that allows for this. (more info below) Are there any secure, scalable DNS alternatives that have gained notoriety? I could ask on StackOverflow, but think the infrastructure groups would have better insight on this. Edit More info: I'm looking at "Namecoin" the DNS version of Bitcoin, and since that project is faltering, I'm looking at alternative ways to store name-value pairs, with an optional qualifier. I think a name value pair is of global interest is useful, but on a limited scale. Namecoin tried to be too much, and ended up becoming nothing. I'm trying to solve that problem in researching alternatives and applying distributed technologies where applicable. Bitcoin/Namecoin offers a Distributed Hash Table, which has some positive aspects, but not useful for DNS, except for root servers.

  Read the article

• Reverse Proxy issues IIS on Windows Server 2012

  - by ahwm

  I've tried searching, but nothing seems to be working. I have a feeling it might be due to our custom Rewrite module. Here is the excerpt from the web.config that sets it up: <modules runAllManagedModulesForAllRequests="true"> <add name="UrlRewriteModule" type="EShop.UrlRewriteModule"/> </modules> EShop.UrlRewriteModule is a custom class in App_Code which handles incoming requests. I have set up the rewrite rules but it doesn't seem to want to work. I'm inclined to think that our rewrite class is interfering earlier than the proxy rules and saying that the page doesn't exist. Here's what we're trying to accomplish: We are working on a new site for a client, but they have a forum that they're not likely to want to move. I set up a new subdomain to point to the new server while the site is being completed (before we go live) and want the reverse proxy to forward test.domain.com/forum to www.domain.com/forum. After the site goes live, we'll need to forward using an IP address instead. I've set up a reverse proxy successfully with nginx, but we didn't want to set up another server if we didn't need to. Ideas?

  Read the article

• Is there any way to customize the Windows 7 taskbar auto-hide behavior? Delay activation? Timer?

  - by calbar

  I'm becoming increasingly frustrated with the way Windows 7 handles showing a hidden taskbar. It's incredibly over-eager to pop out and obscure what I'm really trying to interact with, requiring me to move the mouse away, wait for it to auto-hide again, then resume what I was doing but more deliberately. After closely examining the behavior, it appears that a hidden taskbar "peeks out" from the edge by 2 or 3 pixels, and slowly moving your mouse into this area activates it; you don't even need to touch the edge of the screen. I would love it if there was a way to customize or change this behavior. Ideally, the taskbar would only pop out if you are actively "pushing" the edge of the screen it is hidden on. So activation only occurs once you've reached the screens edge and continue to move the mouse past a customizable threshold. Alternatively, a simple activation delay would suffice as well. So only if the mouse remains in that 2-3 pixel area (a.k.a. on the taskbar) for greater than a customizable amount of time does it pop out again. This would only be a fraction of a second. Often times the cursor simply "careens" off the edge of the screen while trying to focus on something nearby. Anyway, if there are any registry settings or utilities that can achieve either of these effects, that would be great! Thanks for your help.

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• PCs on domain can not resolve external IP addresses using the DC's DNS Server

  - by Ben

  I currently have a domain controller which handles all DHCP and DNS. The DHCP works just fine and the domain controller itself can use the internet with no issues. However, PCs that are part of the domain are not able to use external websites, only internal. Does anyone have any way I can solve this issue? Thank you Server: Windows Server 2008 R2 PC: Win7 Enterprise x64 Edit: (domain controller) C:\Users\bcollyer>nslookup google.com Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: google.com Addresses: 2a00:1450:4009:809::100e 173.194.41.166 173.194.41.165 173.194.41.169 173.194.41.162 173.194.41.161 173.194.41.160 173.194.41.168 173.194.41.167 173.194.41.164 173.194.41.163 173.194.41.174 Edit 2: C:\Users\bcollyernetstat -rn Interface List 12...30 85 a9 f7 8a 21 ......Atheros AR8161/8165 PCI-E Gigabit Ethernet Control ler (NDIS 6.20) 1...........................Software Loopback Interface 1 13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 11...00 00 00 00 00 00 00 e0 Microsoft Teredo Tunneling Adapter IPv4 Route Table Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.16.0.67 172.16.0.202 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.16.0.0 255.255.0.0 On-link 172.16.0.202 276 172.16.0.202 255.255.255.255 On-link 172.16.0.202 276 172.16.255.255 255.255.255.255 On-link 172.16.0.202 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.16.0.202 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.16.0.202 276 Persistent Routes: None IPv6 Route Table Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link Persistent Routes: None BTW I have no javascript on the server so can't reply to individual answers... Sorry!

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• Would an array of SSD drives be able to succesfully substitute the system memory?

  - by Florin Mircea

  I watched a few videos trying to answer this. This video (youtube.com/watch?v=eULFf6F5Ri8) shows a bunch of guys stacking 24 SSD's reaching a peak of around 2GBps r/w. That's under the limit of the worst DDR3 in this list (memorybenchmark.net/write_ddr3_amd.html) - that shows DDR3 memory performance varying from 2.78 to 6.55 Gb per second, but that video is over 3 years old. This video (youtube.com/watch?v=27GmBzQWwP0) shows a more optimistic situation, but for PCI-E SSD drives: 5 drives peaking at around 4Gb. And this other video shows that stacking up more than 3 SSD's doesn't realistically offer a substantial added performance. This and the fact that in all benchmarks the drives act quite poorly when dealing with small files (5k file read/write averaging from 10MB to around 30-40MBps) as opposed to how native memory handles such files, seems to indicate a definite NO to this question. Also, the write life cycle is indeed limited and the drives might wear out quickly, as kindly pointed out by paddy. However, I wanted to get more opinions on this. Would it be possible to at least obtain current memory performance with SSD's in RAID 0? And if so, in what circumstances? I am assuming using this configuration with a Windows OS that has a memory pagefile resident to that stack of SSD's, thus making it very fast to work with.

  Read the article

• Offloading backups to secondary network

  - by user1467163

  I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

  Read the article

• Possible to have different SSLCACertificateFiles under different Location in Apache (client side ssl certs)

  - by Mikko Ohtamaa

  I am setting up Apache to do smartcard authentication. The smartcard login is based on client-side SSL certificates handled by an OS driver. I have currently just one smartcard provider, but in the future there are potentially several of them. I am not sure how Apache 2.2. handles client-side certifications per Location. I did some quick testing and it somehow seemed that only the last SSLCACertificateFile directive would have been effective and this doesn't sound right. Is it possible to have different SSLCACertificateFile per Location in Apache (2.2, 2.4) as described below or is SSL protocol somehow limiting that you cannot have more than one SSLCACertificateFile per IP? Example potential config below how I wish to handle several SSLCACertificateFile on the same server to allow users to log in with different smartcard provides. <VirtualHost 127.0.0.1:443> # Real men use mod_proxy DocumentRoot "/nowhere" ServerName local-apache ServerAdmin [email protected] SSLEngine on SSLOptions +StdEnvVars +ExportCertData # Server-side HTTPS configuration SSLCertificateFile /etc/apache2/certificate-test/server.crt SSLCertificateKeyFile /etc/apache2/certificate-test/server.key # Normal SSL site traffic does not require verify client SSLVerifyClient none SSLVerifyDepth 999 # Provider 1 <Location /@@smartcard-login> SSLVerifyClient require SSLCACertificateFile /etc/apache2/certificate-test/ca.crt # Apache does not natively pass forward headers # created by SSLOptions +StdEnvVars, # so we pass them forward to Python using RequestHeader # from mod_headers RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e </Location> # Provider 2 <Location /@@smartcard-login-provider-2> # For real SSLVerifyClient require SSLCACertificateFile /etc/apache2/certificate-test/provider2.crt # Apache does not natively pass forward headers # created by SSLOptions +StdEnvVars, # so we pass them forward to Python using RequestHeader # from mod_headers RequestHeader set X-Client-DN %{SSL_CLIENT_S_DN}e RequestHeader set X-Client-Verify %{SSL_CLIENT_VERIFY}e </Location> # Connect to Plone ZEO client1 running on fg ProxyPass / http://localhost:8080/VirtualHostBase/https/local-apache:443/folder_sits/sitsngta/VirtualHostRoot/ ProxyPassReverse / http://localhost:8080/VirtualHostBase/https/local-apache:443/folder_sits/sitsngta/VirtualHostRoot/ </VirtualHost>

  Read the article

• Setting a subdomain to access home machine with windows remote desktop

  - by ianhales

  I'm trying to remotely connect to home machine through Windows Remote Desktop (amongst other things, but this is currently my primary focus). I can do this fine using my home WAN's static IP (thank god for cable!) with port-forwarding, but I would like to access it from a subdomain of my web-site (e.g. home.mydomain.co.uk). In the cPanel for my hosting account, I've gone into DNS zones and altered the A-record to point to my WAN's IP, which I thought should do the job, but I still cannot connect. When I ping the subdomain, I get my web-host's IP, which I guess is to be expected as I believe the DNS of the host domain is used first, then my server handles the redirection of traffic to the IP in the A-record. Is this the correct idea? Do A-record changes suffer from the same propagation delays as DNS record changes, as I suppose that could explain it? (by the way, this thread confirms my thoughts that setting the A-record should be enough: Hostmonster Subdomain redirected to home server IP: How to ssh into home server using subdomain)

  Read the article

• Nagios DNX plugins

  - by danneh3826

  I'm toying with the idea of multiple Nagios instances setup to monitor our infrastructure. I've looked at all the various methods of distributed Nagios checks, and I think DNX comes out the closest. DNX handles failure of worker nodes, that's fine. What happens if the main DNX server fails though? Is there a way to replicate the server too? I'm using AWS EC2 primarily, so I can utilise Elastic Load Balancing for the web UI, but I need to be able to handle the AZ where the monitoring server is to fail over, and essentially for a second to pick up the checking load (active/passive, active/active, so long as it doesn't fail completely) The other thing I'm trying to solve is an issue with routing. What I'd like is to have multiple nodes report a fault before Nagios confirms it as critical. Not the NRPE checks, as they're pretty self explanitory, but things more like check_ping. I often have routing issues out of AWS to certain datacenters, so Nagios can often report bad/no ping/timeout as a critical issue, even though the machine in question is working fine. Would it be possible to have a setup where a worker complains a service check is critical, and have a second worker node (positioned in another datacenter/AZ) also report the service as critical before the Nagios central server issues a critical alert? I realise I might be asking a bit much (how far down the line do you go setting up failover systems before it starts to get ridiculous), however surely someone must have thought of this scenario when developing DNX?

  Read the article

• VPS Memory Exchausted Even With Light Settings

  - by user101570

  Linux noob here. I have a 256MB VPS on Ubuntu 11.04 server and when I run "free -m" the result shows all memory being used (including the second line re: buffers/cache). I found this very strange, considering I only have 5 Apache processes running each chewing up about 20MB each. MYSQL is taking up 30MB. To my knowledge, and according to "top", I have no other memory hogs operating. Settings that may be relevant: PHP memory_limit = 32M MYSQL key_buffer = 16M Prefork MPM Maxclients = 10 So when I reviewed these settings, I naturally thought maxclients was too high, so I tried switching it to 5. Now not only does my memory still show as being 100% used, my website loads much, much slower, despite not getting any traffic aside from mine at the moment. I don't understand this. I thought a single Apache process handles all requests from a client received within the "KeepAliveTimeout" window, which I've set to 2 seconds. With my initial config. of 10 maxclients, my page load times are around .3ms, so a single process should handle that no problem, correct? So next I went to an extreme level of 1 for maxclients. My memory is still at 100% usage and my site loads painfully slow. I'm a noob at a complete loss here. According to the many tutorials I've read on basic server setup, I should be good to go. Help! Please! Edit: total used free shared buffers cached Mem: 256 256 0 0 0 0 -/+ buffers/cache: 256 0 Swap: 0 0 0

  Read the article

• Cannot terminate process, "already terminated"

  - by felix-freiberger

  On Windows 8, I regularly get processes into a state where I can't terminate them. Skypekit.exe seems to be the process that's most likely to trigger that issue, but other processes can do that, too. When I try to terminate these processes, I sometimes get an "access denied" message, sometimes nothing happens - but every following attempt to kill that process results in an "access denied" message, too, even though I... have administrative rights (and ran the task manager with it) own that process have the right to terminate it "Process Hacker 2" shows a more detailed error message, stating that I couldn't terminate the process because it already is terminated. Still, the process is most definitely still there, because every task manager I tested still can see it. Process Hacker's "Terminator" is unable to kill such a process, but when running the "Close the process' handles" tactic, Process Hacker gets stuck himself, leaving its windows in "not responding". In that state, other task managers are in turn unable to kill Process Hacker. The only way I found to actually end these processes is to shutdown (which works without any problems). Why is this happening? How can I kill these processes?

  Read the article

• SNMP query - operation not permitted

  - by jperovic

  I am working on API that reads a lot of data via SNMP (routes, interfaces, QoS policies, etc...). Lately, I have experienced a random error stating: Operation not permitted Now, I use SNMP4J as core library and cannot really pinpoint the source of error. Some Stackoverflow questions have suggested OS being unable to open sufficient number of file handles but increasing that parameter did not help much. The strange thing is that error occurs only when iptables is up and running. Could it be that firewall is blocking some traffic? I have tried writing JUnit test that mimicked application's logic but no errors were fired... Any help would be appreciated! Thanks! IPTABLES *nat :PREROUTING ACCEPT [2:96] :POSTROUTING ACCEPT [68:4218] :OUTPUT ACCEPT [68:4218] # route redirect za SNMP Trap i syslog -A PREROUTING -i eth0 -p udp -m udp --dport 514 -j REDIRECT --to-ports 33514 -A PREROUTING -i eth0 -p udp -m udp --dport 162 -j REDIRECT --to-ports 33162 COMMIT *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p icmp -j ACCEPT -A INPUT -i lo -j ACCEPT ..... # SNMP -A INPUT -p udp -m state --state NEW -m udp --dport 161 -j ACCEPT # SNMP trap -A INPUT -p udp -m state --state NEW -m udp --dport 162 -j ACCEPT -A INPUT -p udp -m state --state NEW -m udp --dport 33162 -j ACCEPT ..... -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -j REJECT --reject-with icmp-host-prohibited COMMIT

  Read the article

• Debugging nginx URL rewrite: How do I figure out where the problem is?

  - by pjmorse

  I have a specific URL pattern on a site which needs to be redirected to the HTTPS version. This is a Django site; Nginx checks each URL in memcached, and if it doesn't find a cached version it proxies the request to Apache/mod_python for Django to render the page. The relevant configuration block is rewrite ^/certificate https://mysite.com/certificate ; rewrite ^/([a-zA-Z]{2})/certificate https://mysite.com/certificate ; ...and it doesn't appear to be working at all. Nginx is: $ nginx -V nginx version: nginx/0.7.65 built by gcc 4.2.4 (Ubuntu 4.2.4-1ubuntu4) TLS SNI support disabled configure arguments: --prefix=/usr/local/nginx --pid-path=/var/run/nginx.pid --with-http_gzip_static_module --with-http_ssl_module How can I figure out if the problem is my patterns not matching, or a more obscure configuration problem? (The site is localized to three languages, and the localization is in the URL string, e.g. /US/news/, /DE/about, etc. It tracks localization in the session as well, defaulting to US, so if you just requested /news Django will rewrite to /US/news unless the user has a cookie indicating they're using a different localization. Django handles this, though, not Nginx.)

  Read the article

• NGINX returning 404 error on a valid url

  - by Harrison

  We have a site that runs PHP-FPM and NGINX. The application sends invitations to site members that are keyed with 40 character random strings (alphanumerics only -- example below). Today for the first time we ran into an issue with this approach. The following url: http://oursite.com/notices/response/approve/1960/OzH0pedV3rJhefFlMezDuoOQSomlUVdhJUliAhjS is returning a 404 error. This url format has been working for 6 months now without an issue, and other urls following this exact format continue to resolve properly. We have a very basic config with a simple redirect to a front controller, and everything else has been running fine for a while now. Also, if we change the last character from an "S" to anything other than a lower-case "s", no 404 error and the site handles the request properly, so I'm wondering if there's some security module that might see something wrong with this specific string... Not sure if that makes any sense. We are not sure where to look to find out what specifically is causing the issue, so any direction would be greatly appreciated. Thanks! Update: Adding a slash to the end of the url allowed it to be handled properly... Would still like to get to the bottom of the issue though. Solved: The problem was caused by part of my configuration... Realized I should have posted, but was headed out of town and didn't have a chance. Any url that ended in say "css" or "js" and not necessarily preceded by a dot (so, for example, http://site.com/response/somerandomestringcss ) was interpreted as a request for a file and the request was not routed through the front controller. The problem was my regex for disabling logging and setting expiration headers on jpgs, gifs, icos, etc. I replaced this: location ~* ^.+(jpg|jpeg|gif|css|png|js|ico)$ { with this: location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { And now urls ending in css, js, png, etc, are properly routed through the front controller. Hopefully that helps someone else out.

  Read the article

• Google Apps Domain Level Shared Contacts?

  - by dkirk

  My firm just switched to Google Apps Premiere addition 2 weeks ago and aside from the way Google handles shared contacts, things are going quite well. Previously, on our Exchange server we had numerous shared contact lists set up in the shared folders. We had a separate list for vendors, sales agents, etc.. Is there not a way to set up lists or groups such as this on the domain level in Google Apps? I have found a ton of forums with users asking the same question but no good answers unless you purchase some third party app in the marketplace. I have toyed around with the "google-shared-contacts-client" here: http://code.google.com/p/google-shared-contacts-client/ and this almost does it but it falls short when trying to group contacts on the domain level or when trying to search for a contact by company name. Are either of these things possible? I am now looking to create a Google Doc spreadsheet to share with the domain just to have a separated defined list of contacts that is search-able by various fields... Anyone who could shed some light on domain level contact sharing relating to the points above, I would be most grateful...

  Read the article

• My nameserver isn't registered?

  - by jflory7

  My problem is that I am trying to set my domain's nameservers to the nameservers of my dedicated server. My domain is hosted by Namecheap, and everytime I try to input the two nameservers for my private server, one of them is rejected for being unregistered. My dedicated server's control panel is managed through Parallels Plesk 11.5, and the nameservers provided to me are one from the actual provider, OVH (sdns1.ovh.ca), and the other is an actual unique nameserver that points directly to my specific dedicated server. Previously, for another domain I own, I was successfully able to get Namecheap to take the nameserver without an error, so I know this is possible. I know that it works for one of my other domains. After being redirected by Namecheap to contact the server provider, I called OVH and they said it was something I would have to do myself. One interesting detail the OVH representative mentioned was that he saw that my port 53 was closed, which is the port that handles DNS. The only problem is that I have no idea or knowledge as how to open this port back up. So, my final question is how can I get this nameserver working in Namecheap to point to my dedicated server? If you need any more details, feel free to ask for clarification.

  Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >