Search Results

Search found 17744 results on 710 pages for 'target mode'.

Page 541/710 | < Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >

• Why do I get a DegradedArray event with mdadm

  - by azera

  Hello Just so we're clear on what's happening: I bought 4 new sata 2 drives, with the intent of using them in a raid5 all drive are fully recognised by both my bios and my linux box (gentoo) I created a raid5 array, fiddled a bit with it to understand how it works, how to monitor ect At some point, this triggered a degradedarray event, even though the array is brand new. I tried to stopping the array and recreating a new array with the same drive but the new array starts degraded too. here is what I used to create it mdadm --create -l5 -n4 /dev/md/md0-r5 /dev/sdb /dev/sdd /dev/sde /dev/sdf here are the output from my /proc/mdstat and mdadm --detail --scan **mdstat** Personalities : [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid5 sdf[4] sde[2] sdd[1] sdb[0] 4395415488 blocks level 5, 64k chunk, algorithm 2 [4/3] [UUU_] [>....................] recovery = 2.8% (41689732/1465138496) finish=890.3min speed=26645K/sec unused devices: <none> **detail** ARRAY /dev/md/md0-r5 metadata=0.90 spares=1 UUID=453e2833:81f22a74:64188b84:66721085 As such I have a couple questions: does a raid5 array always start in degraded mode at first ? why does sdf have the number 4 between bracket instead of 3, why does it see a spare disk and why is the 4th drive marked with _ instead of U ? (bad configuration ?) How can I recreate the array from scratch, do i have to format each drive on its own before recreating it ? Thanks for any help, I'm not sure about what I should do at the moment

  Read the article

• Problems mounting HPUX LVM+VXFS filesystem on Linux

  - by golimar

  I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

  Read the article

• Access Windows Boot Manager selector when timeout is set to 0?

  - by Kyle Cronin

  I've installed Wubi onto a Windows Vista computer. I've also set the boot timeout to 0: bcdedit /timeout 0 However, now I can't figure out how to get the menu to come up at all! I read on the internets that I had to hold F8 or space when starting up, but they doesn't seem to do anything. Is there a different key or setting I've overlooked? The computer itself is a Dell that's a few months old. The keyboard is USB, but I don't think that's the problem as I can get into the BIOS just fine. Maybe I'm doing it wrong? Am I supposed to hold the keys or rapidly tap them (I've tried both)? If it helps, here's the output from bcdedit: C:\Windows\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=C: description Windows Boot Manager locale en-US inherit {globalsettings} default {current} resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} displayorder {current} {e2484fe7-5e97-11de-84d4-0024e8074422} toolsdisplayorder {memdiag} timeout 0 resume No Windows Boot Loader ------------------- identifier {current} device partition=C: path \Windows\system32\winload.exe description Windows Vista locale en-US inherit {bootloadersettings} recoverysequence {572bcd55-ffa7-11d9-aae0-0007e994107d} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {5460d9d2-d391-11dc-9d9f-aba67a8797c5} nx OptIn Real-mode Boot Sector --------------------- identifier {e2484fe7-5e97-11de-84d4-0024e8074422} device partition=C: path \ubuntu\winboot\wubildr.mbr description Ubuntu

  Read the article

• Need to Remove Exchange 2003 Server That Crashed During Transition to 2010

  - by ThaKidd

  As the title stated, we were running an Exchange 2003 server that we knew was going down soon so we purchased a second server and installed Exchange 2010 into the AD. We managed to move all of the mailboxes off of 2003 and also managed to get the Offline Address Book setup on 2010. At this point the 2003 server bit the dust and will no longer boot. Therefore we were unable to properly uninstall Exchange and remove the last 2003 server so it still exists in AD. As far as the clients are concerned, everything is working properly. However, when I run the Microsoft Exchange Profile Analyzer, I still see the old server and its Administrative Group. I am going to guess that since the old server is showing up in AD, I will not be able to raise Exchange or AD functionality (as the 2003 server was also the only AD DC) levels. I have forced the 2003 DC out of AD so that is no longer an issue. Old Setup: Windows 2003 Server Enterprise & Exchange 2003 Standard New Setup: Windows 2010 Server Enterprise & Exchange 2010 Standard Two Questions: How do you go about manually forcing the 2003 server and its administrative group out of AD? When that is finished, where do you raise the Exchange mode (can't find this for the life of me)?

  Read the article

• SSHing thru an HTTP proxy

  - by Siler

  Typical scenario: I'm trying to SSH thru a corporate HTTP proxy to a remote machine using corkscrew, and I get: ssh_exchange_identification: Connection closed by remote host Obviously, there's a lot of reasons this might be happening - the proxy might not allow this, the remote box might not be running sshd, etc. So, I tried to tunnel manually via telnet: $ telnet proxy.evilcorporation.com 82 Trying XX.XX.XX.XX... Connected to proxy.evilcorporation.com. Escape character is '^]'. CONNECT myremotehost.com:22 HTTP/1.1 HTTP/1.1 200 Connection established So, unless I'm mistaken... it looks like the connection is working. So, why then, doesn't it work via corkscrew? ssh -vvv [email protected] -p 22 -o "ProxyCommand corkscrew proxy.evilcorporation.com 82 myremotehost.com 22" OpenSSH_6.6, OpenSSL 1.0.1f 6 Jan 2014 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Executing proxy command: exec corkscrew proxy.evilcorporation.com 82 myremotehost.com 22 debug1: permanently_set_uid: 0/0 debug1: permanently_drop_suid: 0 debug1: identity file /root/.ssh/id_rsa type -1 debug1: identity file /root/.ssh/id_rsa-cert type -1 debug1: identity file /root/.ssh/id_dsa type -1 debug1: identity file /root/.ssh/id_dsa-cert type -1 debug1: identity file /root/.ssh/id_ecdsa type -1 debug1: identity file /root/.ssh/id_ecdsa-cert type -1 debug1: identity file /root/.ssh/id_ed25519 type -1 debug1: identity file /root/.ssh/id_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6p1 Ubuntu-2ubuntu1 ssh_exchange_identification: Connection closed by remote host

  Read the article

• Copy from CDROM is very slow in Ubuntu

  - by ???

  I'm using the command to copy CDROM image: # dd if=/dev/sr0 of=./maverick.iso But it's very slow, at about 350k bytes/sec. I've searched the google, and try the command # hdparm -vi /dev/sr0 /dev/sr0: HDIO_DRIVE_CMD(identify) failed: Bad address IO_support = 1 (32-bit) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device Model=DVD-ROM UJDA775, FwRev=DA03, SerialNo= Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=yes, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: ATA/ATAPI-5 T13 1321D revision 3: ATA/ATAPI-1,2,3,4,5 * signifies the current active mode Seems like DMA is already on. And a device test gives: # hdparm -t /dev/sr0 /dev/sr0: Timing buffered disk reads: 2 MB in 6.58 seconds = 311.10 kB/sec # sudo hdparm -tT /dev/sr0 /dev/sr0: Timing cached reads: 2 MB in 2.69 seconds = 760.96 kB/sec Timing buffered disk reads: m 4 MB in 5.19 seconds = 789.09 kB/sec The CD-ROM device and disc should be okay because I can copy it very fast in Windows, using UltraISO utility. So I guess there is something not configured right in Ubuntu, is it?

  Read the article

• Recommendations for colocation in the US

  - by Emil

  Hello serverfault I work for a European media company and we are currently looking for colocation in the US. I know the European market quite well unfortunately that is not the case for the US. I'm hoping for you guys to help me out a bit with a few questions, it would be much appreciated! I am looking for a data center that can deliver a high level of availability (tier 3 or better). The installation will be fairly large so capacity is important. Good internet connectivity/carrier presence. However most important is good customer support, skilled dedicated and responsive technical staff, since we won't have tech staff close by. I'm looking for a small and fast moving company that target internet businesses rather than big old enterprise hosting. What locations should we go for given that we want to reach all of the US from a single site and still maintain decent latency? (do we need east and west coast?) Where are the main internet hubs and should you try and get as close as possible? Are there any good online resources I should look at? Where do the large scale internet/media services colocate? Lastly I would be very happy to get some actual recommendations for companies to talk to P.S I'm happy to return the favor if anyone has question regarding data centers and colocation in Europe.

  Read the article

• Why does notepad crash on desktop files in the save-as dialog?

  - by deepc

  Here's a puzzling problem - maybe somebody has an idea. Right now I am out of ideas. On Win7 64bit, the following crashes Notepad: On Desktop, right click, select "New | Text Document". This creates "New Text Document.txt". Right click on that file, select "Edit". This opens notepad with the empty file. Select "File | Save as": Notepad crashes and Win7 reports that "Notepad has stopped working". Now, move the file to c:\temp and repeat steps 2 and 3: no crash this time and the save-as dialog appears normally. I can create similar steps for the "open" dialog. Things I have tried: Safe mode - does not work, same problem Create a new user and try again logged in as that user - no crash Name file differently, or create elsewhere and then move to desktop - same problem Use Wordpad instead - same problem Review shell extensions with ShellExView - nothing extraordinary here Stare at the event log entries for each of the crashes. Does not enlighten me. At time of crash look at the process explorer stack view. Hangs at a function "TaskDialog". sfc.exe /scannow repaired some files but the problem persists. This is how the event log entries look like: Log Name: Application Source: Application Error Date: 14.12.2010 00:33:48 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Description: Faulting application name: NOTEPAD.EXE, version: 6.1.7600.16385, time stamp: 0x4a5bc9b3 Faulting module name: COMCTL32.dll, version: 6.10.7600.16661, time stamp: 0x4c6f6e4b Exception code: 0xc000041d Fault offset: 0x00000000000db770 Faulting process id: 0x198 Faulting application start time: 0x01cb9b1e140ab92a Faulting application path: C:\Windows\system32\NOTEPAD.EXE Faulting module path: C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_fa62ad231704eab7\COMCTL32.dll What else should I try, short of dumping my user and starting over with a new profile? Thanks...

  Read the article

• Exchange 2010 Hub cannot deliver to Exchange 2007 Hub - "451 5.7.3 Cannot achieve Exchange Server authentication"

  - by Graeme Donaldson

  We have an existing Exchange 2007 server in Site A (exch07). I've installed an Exchange 2010 server in Site B (exch10). Both servers have the CAS, Mailbox and Hub roles. Messages sent via SMTP on exch10 which are destined for mailboxes on exch07 are queued with the "Last Error" reported in Queue Viewer as '451 4.4.0 Primary target IP address responded with: "451 5.7.3 Cannot achieve Exchange Server authentication." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts.' I've found that some people have resolved this by creating new Receive Connectors which are scoped specifically to apply to connections from the remote hub/s, but I have had no luck doing this. Specifically I created new receive connectors on both servers with the following settings: Remote IP = IP/s of remote server Authentication = "Transport Layer Security (TLS)" and "Exchange Server authentication" Permission Groups = "Exchange servers" and "Legacy Exchange Servers" This made no difference, I see the same error message. What am I missing? Update: We noticed that the Application log had this error message from MSExchangeTransportService: Microsoft Exchange could not find a certificate that contains the domain name exch07.domain.local in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector exch10 with a FQDN parameter of exch07.domain.local. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. It turns out that the default self-signed certificate was no longer enabled for the SMTP service for some reason. After enabling the self-signed certificate for SMTP, we no longer get the error in the event logs, but delivery is still failing with the same error message. Update 2: I put a mailbox on exch10 and attempted to deliver a message via SMTP on exch07 and I get the same error.

  Read the article

• How to forceably unmount stuck network share in Mac OS X?

  - by Kyle Lowry

  Not long ago my Xserve failed (power loss) while an iMac was working with files on a particular network share (called "Work Share"). This volume, "Work Share", is now stuck. It can't be seen in the GUI, you can only detect it using the Terminal. Even after power cycling over the course of several days, ls -a still shows that it's there, but I can't unmount it using any command - not even as root in single user mode. Every time I attempt to unmount that volume, I get the message that the resource is busy (which it can't possibly be since nothing is using it), and error code 4915. The issue is that when I mount the real "Work Share", it internally is renamed to "Work Share-1", which breaks all my links, and several files in the share. If I can't unmount the false "Work Share", then that computer would be unuseable without a reformat, I would imagine - and I don't want it to have to come to that. I've tried everything I can think of - it looks like sudo can't save me now. Any ideas on how to unmount this stuck volume?

  Read the article

• Replication keeps popping up on SharePoint databases

  - by Ddono25

  My typical discovery scenario: We receive an alert that the transaction log is growing quickly. We are in Simple Recovery so I go to check it out. Log is already sized to 100GB and is at 80% capacity. I run the "Whats using my log files" script from SQL Server Central and see that Replication is enabled on the database. We do not set up replication, and I don't think Replication can be done on SharePoint content db's as Replication is not supported (requires PK on all tables). This has been occurring on random servers (about 5 so far, all within the past three weeks) and it only occurs on Content Databases. sp_removedbreplication does not always work in removing the Replication either. We have found that we need to run the sp_removedbreplication, change all db owners to SA and reset Recovery Mode to Simple to completely eradicate any vestiges of this bug. How would Replication be enabling itself? We have never set up Replication on these servers. There is no evidence of any type of Replication other than the 'log_reuse_wait_desc' from the DMV query and log growth. Any help on this ghost would be appreciated!

  Read the article

• Load balancing a Windows File Share using HA-Proxy

  - by NathanE

  After pulling my hair out over DFS I just had this weird and potentially dangerous idea come into my head whereby, just possibly, I might be able to use HA-Proxy to load balance a file share between servers. I've done some remedial packet traces and it does appear that TCP port 445 is the only thing involved in using Windows file sharing. I've always thought for many years that UDP 139, 135 etc were also involved in at least establishing the connection - but apparently not! So I setup a basic test: listen SMBTest *:445 mode tcp server Smb1 172.16.61.201:445 server Smb2 172.16.61.202:445 And you'll never guess what... it works??? (!) Now obviously there is the whole concern about synchronisation between the file servers (of course). That could easily be taken care of with a little bit of Robocopy script. And considering I only need a HA read-only file share there wouldn't be any issues with regard to file locking etc. Can anyone tell me if what I'm playing with here is fire? I really didn't think it would work at all and now I'm a little shocked. What would be the downsides? Could this be relied upon for a production environment?

  Read the article

• How to run the CPU at something like 75%?

  - by Tobias Kienzler

  My notebook is too old for me to invest into a new fan (it will simply be replaced by a new one when the final heat death occurs), but when it runs on full speed I feel like sitting in front of a vacuum cleaner with integrated cooking... I'm currently using NHC, the Max Battery mode of which let's the CPU run at 50% (~800 MHz). That's fine for most applications, and both temperature and noise remain low. However, on some occasions I need a bit more speed, more around 75% maybe. Can I set the power saving settings somehow so that the CPU won't surpass 75% of it's capability so that an acceptable compromise between power and noise is achieved? I can't set the CPU frequency in the BIOS and since on rare occasions I'd like to be able to switch to 100% without much hassling, hardware solutions like setting jumpers are no option. This answer to a similar (linux!) question mentions NHC should be able to offer these options, but for me they are all greyed out: The notebook is an Asus Z9200K, I guess NHC doesn't support its chipset enough for these advanced options.

  Read the article

• Linux: How do I remove bootchart from the boot process?

  - by java.is.for.desktop

  Hello, everyone! I have OpenSUSE 11.2. I removed bootchart and forgot to run mkinitrd. Now, right at the start of the boot process, I get boot/93-bootchart.sh: line 17: 462 Terminated stopinitrd 5 I Can't find any 93-bootchart.sh anywhere. Failsafe boot mode doesn't help. Earlier I got an error message about non existing /sbin/bootchartd, but I just copied /bin/cat to /sbin/bootchartd using a GParted boot disk. I tried to use chroot with an OpenSUSE boot disk, but mkinitrd can't find the root device, which is there actually (/dev/sda5). How can I make my system boot again? EDIT Ok, now I managed to re-install the bootchart rpm, using OpenSUSE boot disk and chmod. The system starts again. But that annoying bootchart is still there. I will not try again to remove it. First I will try to figure out, how to disable it during the boot process. Hopefully with your help ;)

  Read the article

• Rebuild Apple RAID set

  - by Clinton Blackmore

  We have a Mac Pro tower with an Apple RAID card in it using third party drives. When one drive failed, we replaced it and the RAID 5 set was nearly done rebuilding when the computer was rebooted. It did not come back up. We are now booting up off of a different internal volume, and have three (third-party) drives of identical spec (including revision and firmware) in the box. One of the drives is a global spare; the other two are recognized as belong to a RAID set but are in "Roaming" mode. The intention is to recreate the three-drive RAID set using the data on the two drives that are good. When we tell the system to create a RAID 5 using the three drives, it tells us that it'll create a RAID set but everything will be lost. There are no obvious options to rebuild a RAID using the two good drives and incorporating the third drive in Apple's RAID Utility, and we've looked through the options for the raidutil command. Fortunately, all important data is backed up, and we can rebuild from scratch, but, is there any way to make the RAIDset work again?

  Read the article

• VirtualBox problems writing to shared folders (Guest Additions installed)

  - by vincent

  I am trying to setup a shared folder from the host (ubuntu 10.10) to mount on a virtualized CentOS 5.5 with Guest Additions (4.0.0) installed (Guest addition features are working ie. seamless mode etc.). I am able to successfully mount the share with: mount -t vboxsf -o rw,exec,uid=48,gid=48 sf_html /var/www/html/ (uid and guid belong to the apache user/group) the only problem is that once mounted and I try to write/create directories and files I get the following: mkdir: cannot create directory `/var/www/html/test': Protocol error I am using the proprietary version of VirtualBox version 4.0.0 r69151. Has anyone had the same problem and been able to fix it or has any idea how to potentially fix this? Another question, the reason for setting this up is this. Our production servers are on CentOS 5.5 however I am a great fan of Ubuntu and would like to develop on Ubuntu rather than CentOS. However in order to stay as close to the production environment I would like to virtualize CentOS to use a web server and use the shared folder as web root. Anyone know whether this isn't a good idea? Has anyone successfully been able to set this up? Thanks guys, your help is always much appreciated and if you need any more information please let me know.

  Read the article

• Google Apps Sync bloated PST file to 14GB

  - by James S

  Back story: I have Outlook connected to my Google Apps email and noticed that some mail never got migrated from my original PST file. I found some VBA code online that compares mail in different PST folders, modified it to find missing and copy those to the target folder. I ran it folder by folder and moved missing mail. Before the exercise the Google Apps PST was about ~4GB and after it was ~4.7GB. Problem: I left Outlook open so Google Sync can copy it online. 24 hours later the Google Apps PST file bloated to 14GB+ and none of the mail has been synced to the cloud. I know that there should be at most ~5GB of mail. Why is the rest of the space being taken up? Funny thing is Gmail shows 3GB as being used online. What I tried: I emptied the deleted items folder and recycling bin I've run Outlook compact PST and it didn't work. I tried SCANPST.exe on the PST and it didn't work. I re-ran compact PST and it didn't work (after SCANPST found and fixed a few errors) Any ideas out there on what caused the problem and how to solve it?

  Read the article

• Setfacl configuration issue in Linux

  - by Balualways

  I am configuring a Linux Server with ACL[Access Control Lists]. It is not allowing me to perform setfacl operation on one of the directoriy /xfiles. I am able to perform the setfacl on other directories as /tmp /op/applocal/. I am getting the error as : root@asifdl01devv # setfacl -m user:eqtrd:rw-,user:feedmgr:r--,user::---,group::r--,mask:rw-,other:--- /xfiles/change1/testfile setfacl: /xfiles/change1/testfile: Operation not supported I have defined my /etc/fstab as /dev/ROOTVG/rootlv / ext3 defaults 1 1 /dev/ROOTVG/varlv /var ext3 defaults 1 2 /dev/ROOTVG/optlv /opt ext3 defaults 1 2 /dev/ROOTVG/crashlv /var/crash ext3 defaults 1 2 /dev/ROOTVG/tmplv /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/ROOTVG/swaplv swap swap defaults 0 0 /dev/APPVG/home /home ext3 defaults 1 2 /dev/APPVG/archives /archives ext3 defaults 1 2 /dev/APPVG/test /test ext3 defaults 1 2 /dev/APPVG/oracle /opt/oracle ext3 defaults 1 2 /dev/APPVG/ifeeds /xfiles ext3 defaults 1 2 I have a solaris server where the vfstab is defined as cat vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - /dev/vx/dsk/bootdg/swapvol - - swap - no - swap - /tmp tmpfs - yes size=1024m /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no logging /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no logging /dev/vx/dsk/bootdg/home /dev/vx/rdsk/bootdg/home /home ufs 2 yes logging /dev/vx/dsk/APP/test /dev/vx/rdsk/APP/test /test vxfs 3 yes - /dev/vx/dsk/APP/archives /dev/vx/rdsk/APP/archives /archives vxfs 3 yes - /dev/vx/dsk/APP/oracle /dev/vx/rdsk/APP/oracle /opt/oracle vxfs 3 yes - /dev/vx/dsk/APP/xfiles /dev/vx/rdsk/APP/xfiles /xfiles vxfs 3 yes - I am not able to find out the issue. Any help would be appreciated.

  Read the article

• SFTP ChRoot result in broken pipe

  - by Patrick Pruneau

  I have a website that I want to add some restricted access to a sub-folder. For this, I've decided to use CHROOT with SFTP (I mostly followed this link : http://shapeshed.com/chroot_sftp_users_on_ubuntu_intrepid/) For now, I've created a user (sio2104) and a group (magento).After following the guide, my folder list look like this : -rw-r--r-- 1 root root 27 2012-02-01 14:23 index.html -rw-r--r-- 1 root root 21 2012-02-01 14:24 info.php drwx------ 15 root root 4096 2012-02-25 00:31 magento As you can see, i've chown root:root the folder magento I wanted to jail-in the user and ...everything else by the way. Also in the magento folder, I chown sio2104:magento everything so they can access what they want. Finally, I've added this to sshd_config file : #Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp Match Group magento ChrootDirectory /usr/share/nginx/www/magento ForceCommand internal-sftp AllowTCPForwarding no X11Forwarding no PasswordAuthentication yes #UsePAM yes And the result is...well, I can enter my login, password and it's all finished with a "broken pipe" error. $ sftp [email protected] [....some debug....] [email protected]'s password: debug1: Authentication succeeded (password). Authenticated to 10.20.0.50 ([10.20.0.50]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Write failed: Broken pipe Connection closed Verbose mode gives nothing to help. Anyone have an idea of what I've done wrong? If I try to login with ssh or sftp with my personnal user, everything works fine.

  Read the article

• The USB mouse sticks in Windows 7 after automatic attempt to fix the boot

  - by chelder

  Avast Antivirus asked me to delete a probable virus and to restart to perform a checking. I had to stop the checking at the middle of the procedure as I needed the computer. It was imposible to turn off the computer pushing the power button (as it entered in suspension mode, no matter how long I kept pushed the power button). I removed the battery as the only way to restart the computer. Windows 7 said that there is a problem to iniziate Windows. Windows 7 tried to fix the problem without success. Windows 7 started after that though. Everything is OK but the USB mouse. The USB mouse sticks and freezes each couple of seconds more or less. The tactile mouse (PS2) works well. I googled for solutions but the posible solutions didn't work for me. What happened? How could I fix it without formatting and reinstalling everything? UPDATE: this is what I did: Change the mouse from one usb port to another Test another mouse Set the number of cores of the CPU manually with msconfig Power management: not disable usb ports Check hard disk errors

  Read the article

• Xen 4.1.2 unable to boot

  - by Devator

  I have installed Xen 3.1.2 perfectly, and it's running fine. However since that version is way outdated I just updated it to 4.1.2 by adding the gitco repository and then yum update. It installed fine, modified my grub.conf to reflect the changes but then on a reboot, it simply doesn't come back online (I can't see what's going on, as it's a rented dedicated server). What are my options? Booting into rescue mode and using the older kernel works fine, it will come back up. But once I use the xen.gz-4.1.2kernel, it won't come back up anymore and I need to use the rescue image.. My /boot/grub/grub.confis as follows: title CentOS (2.6.18-308.1.1.el5xen) root (hd0,1) #kernel /xen.gz-2.6.18-308.1.1.el5 dom0_mem=1024M kernel /xen.gz-4.1.2 module /vmlinuz-2.6.18-308.1.1.el5xen ro root=/dev/md1 module /initrd-2.6.18-308.1.1.el5xen.img When I uncomment the 3.1.2 kernel, it works fine, but booting with the 4.1.2 kernel fails and I have no idea what's going on. Hence my question: what are my options?

  Read the article

• how to maitain the authentication details/passwords in a 50 people company

  - by sabya

  What is the process that you guys follow to maintain authentication details like login ids and passwords? There will be definitely some shared passwords. So, the target is to minimize the impact when someone is leaving the company. By "shared password", I mean, the account, which is shared among multiple people in the company. The issues that the process should address are: - Affected areas. Quickly find the resources to which the leaving user was having access to. Forgetting password. What happens if a user forgets an authentication details? How does he get it? I think he shouldn't ask a team mate. I mean no-verbal communication. Find dependencies of a resource. Suppose I am changing the password for a mail account, which is getting used by some automated scripts to send mails. Here, the scripts are dependent on the mail account, so changing the password of the mail account means we have to change the password in the script too. So, how do find all the dependencies of a resource? I'd prefer a process which addresses these issues. But you can also recommend products which are open source and not hosted. I have gone through PassPack, but they don't solve #4. There is a similar question here. But that does not exactly answer my question.

  Read the article

• Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

  - by rkjnsn

  I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

  Read the article

• How to use the correct SSH private key?

  - by Dail

  I have a private key inside /home/myuser/.ssh/privateKey I have a problem connecting to the ssh server, because i always get: Permission denied (publickey). I tried to debug the problem and i find that ssh is reading wrong file, take a look at the output: [damiano@Damiano-PC .ssh]$ ssh -v root@vps1 OpenSSH_5.8p2, OpenSSL 1.0.0g-fips 18 Jan 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for vps1 debug1: Applying options for * debug1: Connecting to 111.111.111.111 [111.111.111.111] port 2000. debug1: Connection established. debug1: identity file /home/damiano/.ssh/id_rsa type -1 debug1: identity file /home/damiano/.ssh/id_rsa-cert type -1 debug1: identity file /home/damiano/.ssh/id_dsa type -1 debug1: identity file /home/damiano/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 74:8f:87:fe:b8:25:85:02:d4:b6:5e:03:08:d0:9f:4e debug1: Host '[111.111.111.111]:2000' is known and matches the RSA host key. debug1: Found key in /home/damiano/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/damiano/.ssh/id_rsa debug1: Trying private key: /home/damiano/.ssh/id_dsa debug1: No more authentication methods to try. as you can see ssh is trying to read: /home/damiano/.ssh/id_rsa but i don't have this file, i named it differently. How could I tell to SSH to use the correct private key file? Thanks!

  Read the article

• cron doesn't execute any task, but writes into log as executed

  - by FractalizeR

  I have strange problem on one of my servers. Cron does not execute any task, but it writes to it's log, that task has been executed successfully. Like some simulation mode is activated... Apr 30 03:03:08 nd-10049 crond[13387]: (root) CMD (php /usr/local/frb/backup.php) Apr 30 03:05:01 nd-10049 crond[13397]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:09:01 nd-10049 crond[19108]: (root) CMD (/etc/webmin/cron/tempdelete.pl ) Apr 30 03:10:01 nd-10049 crond[19467]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:14:44 nd-10049 crontab[21154]: (root) BEGIN EDIT (root) Apr 30 03:15:01 nd-10049 crond[21309]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php>/home/support/public_html/cron/hourly.log) Apr 30 03:15:38 nd-10049 crontab[21154]: (root) REPLACE (root) Apr 30 03:15:38 nd-10049 crontab[21154]: (root) END EDIT (root) Apr 30 03:16:01 nd-10049 crond[14961]: (root) RELOAD (cron/root) Apr 30 03:20:02 nd-10049 crond[22620]: (root) CMD (php /home/support/public_html/cron/cron_hourly.php) There are no errors about cron in common log (messages). The OS is CentOS. What can I do to check what is the problem? What can the problem be?

  Read the article

< Previous Page | 537 538 539 540 541 542 543 544 545 546 547 548  | Next Page >