Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 542/727 | < Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >

• windows server 2003 speed issues

  - by farzinSH

  I have a HP server with windows server 2003 and 50 windows XP clients. Since a week and a half the networks speed suddenly drop 2-3 times per day. It gets so slow that none of the clients could work with the HIS program installed on them. We tried so many different things such as replacing the hubs,switches and even some wires. Every time one of these changes solves the problem and the network goes back to its normal state. I checked everything. Even when I disconnected all the clients from the server and connected it to just one computer the problem still remained for 2 hours. I just narrowed down the problem to the couple of likely speculations as follows: viruses? (Updated Kaspersky running on the server shows none) server hardware failure? Physical memory usage on the server? (Because the last time the problem occurred none of the changes above solved the issue so I restarted the server an checked the physical memory usage which was 2 GBs. But I noticed it's increasing over time to over 9 GBs...the server has 16 GBs of RAM.) I surfed the internet and got nothing. Any help would do us a lot....thanks in advance

  Read the article

• Walk me through the Linux log files (please)

  - by Andy

  Hey all, I just tried loading a 2MB file in gedit and it silently died on me. I was wondering if anything might appear in a log file that might help me diagnose this: I checked syslog and found out it segfaulted. While doing this I realised that I don't really know anything about how logging is organised on *nix machines. All I know at the mo is Logs are typically stored in /var/log/... is there anywhere else that I should know about? I'm familiar with application specific logs, such as apache's. I understand that dmesg is the bootup log, and syslog is a general system log... is that right? So would someone mind taking me through the most useful logs? Are the two logs I mention in the final point the only general logs? And what are the funky numbers at the start of lines in dmesg? Seconds since startup? Please include anything in your answers that you think would improve my understanding here and help me track down anomalies! TIA Andy

  Read the article

• Huge discrepancy in Inkscape file size

  - by Keyran

  When using Inkscape to create many pictures with common elements across them, I tend to copy the first SVG file I have created as many times as I need pictures, and then edit the copies. If I reuse files across projects, it can result in a file being copied and modified tens to hundreds of files. I have recently realized that the latest copies have a size between 29 and 60 MB, slowing my computer down significatively. My pictures are very simple, nothing that would normally go over 1 MB in size. As an experiment, I copied the entire content of one of the latest files into a new Inkscape file. I am certain that I have copied the content of the file entirely (I have only one layer and I used the "Select All" option). The new file has a size of 102,2 KB. This would indicate that about 30 MB of data per file is irrelevant to me. What could be the cause of this size difference ? Is there a way to reduce the size of a file without having to copy the content into a new file ? I am using Inkscape 0.48.4 on Debian Unstable. Thanks for any input you might be able to provide !

  Read the article

• Is there an simple but good To Do Manager app for the Mac?

  - by Another Registered User

  Every morning I think about what I am going to do today. So I take a paper and start to write things like: [ ] Call Mr. XYZ [ ] Answer Support E-Mails [ ] Reduce website header height by 20 px [ ] Create new navigation bar icons And every time I'm done with something, I paint a checkmark in this square. On paper. It would be fun to have something like this as an application. But I don't want a heavy project management tool or integration with email. It should be like download, install, use without fat configuration and steep learning curve. usually I don't schedule my to do's, I just write down every day what I want to accomplish today. For my experience it doesn't make sense to plan what to do next week, because next week everything looks totally different. Would be cool if such a simple utility exists. At the moment I try just using textEdit and deleting rows which are done. With a nice interface, this would be much more fun.

  Read the article

• With Ubuntu 12.04 unlike 11.04 Wine installed application start menu links are missing

  - by Ron Whites

  With Ubuntu 12.04 and wine 1.4 unlike ubuntu 11.04 with wine 1.2.2 installed application start menu links are missing. For instance with Ubuntu 11.04 including Wine I can install one of our Windows applications and then can go to Applications Wine Programs Semantic Designs TestCoverage Documentation to bring up the documentation for how to run our tool. Unfortunately with Ubuntu 12.04 the Applications menu is gone and going to Dash I do see "Recent Apps and more apps" but my installed Wine application and related documentation link is shown present, even though the wine uninstaller shows in present. I found this online suggestion and tried using the gnome "main menu"... Windows key to launch the Dash. Enter "Main Menu" in the search field and open the old Edit Main Menu app. Select the Category (aka Unity Dash Filter) you want the item in. Name the Dash/Launcher Item Add the Command to launch said app With "mainmenu" then get down to the TestCoverage Documentation and I could see a command link in properties of .. env WINEPREFIX="/home/sdtest/.wine" wine C:\windows\command\start.exe /Unix /home/sdtest/.wine/dosdevices/c:/users/sdtest/Start\ Menu/Programs/Semantic\ Designs/Test\ Coverage/Java\ 1.7\ Documentation.lnk BUT I could not execute this link to view the installed documentation. So I copied the link properties into a file, set it as executable, and ran it as a bash script and the documentation came up! So why can't I use this link under main menu?

  Read the article

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• Directory service unavailiable, new hardware same settings

  - by Alex

  I'm working on a project with 2 sites connected by a VPN. Site 1 has the main server and there is a secondary server at site 2 which I am trying to replace. The current setup works perfectly however I can't for the life of me get the replacement server at site 2 up and running. I'm trying to replace like for like just upgraded hardware. I have installed the OS (all Server 2003 Standard SP2) and used exactly the same settings as the old server. I have setup Active Directory, DNS Server, DHCP Server and WINS Server configured. I have used all the same settings as the old server (except IP address and name). I can access the active directory but I can't do anything; add, edit, delete all returns "the directory service is unavaliable". No-one can login on any of the computers on site 2 and the internet is down. Plugging the old server back in and connecting it to the network rectifies the issue (so both new and old are connected at site 2), everyone can login and the internet is back (curious since the modem connects direct to the switch, and even with the new server online I can connect to the router via IP but not the net). I really don't have much experience but I've been roped into doing this because my company is too cheap to hire a real network admin. Any suggestions of where I can start to troubleshoot this, its driving me crazy and I only have a day before all the users are back on site.

  Read the article

• No "New Folder" button in windows 7

  - by user1125620

  My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

  Read the article

• Windows 8 Killed my SSDs

  - by SLaks

  I have a computer running 2 256GB Crucial M4's (CT256M4SSD2) in a RAID 0 (striped) array on an ASUS P9X79 Pro using Intel's (built-in) RAID system. I recently installed Windows 8 Pro as UEFI on this RAID array. (wiping a fully-function Windows 7 non-UEFI installation) Now, whenever the computer is left running for about an hour, the system no longer sees those drives. Since those drives contain Windows, this leads to various forms of BSODs. If I Intel RSTe (RAID manager) is running at the time, it will say that the disk backing that RAID array has been removed. Once this happens, if I reset the computer, it will no longer boot. Entering BIOS setup shows that the SATA 3 (6Gbps) ports that those disks are connected to are both empty. If I then power down the system completely, then turn it on again, the drives reappear, but the problem repeats after another hour or so. I have inconclusively determined that the problem occurs even if Windows is not running (booted into the installation environment from a UEFI flash drive) I don't think there has been any data corruption since this started happening, although I have had two strange issues with a GIT repo on that disk. sfc /ScanNow and Intel's disk check (in RSTe) both do not find anything. Does anyone know what might cause this?

  Read the article

• Building a small server farm

  - by RayQuang

  Hi, I am planning to set up a Tech startup company that will provide web application solutions. Eventually we hope to diversify into different areas such as possibly social media or other services. For now we plan on running a high demand (from 1000 to 10,000 users in the first year) website running the application. This includes a MySQL database backend, email, and development servers. My question is then, what type of server arrangement will work best, that is ti say should i have a small cluster of ultra high power machines (E.G. Top of the range Xeons, with 12GB RAM) or will it be better to have more less powerful servers load balanced? Should I go for 1 - 2 u servers rack mounted ot would it be beter for it just to be tower servers for maintainability? Finally I would also like to know what kind of Internet and router i would need, I currently have 10mbit down and barely 1 mbit up, but soon our area will have a fiber optic connection with international speeds of up to 25 mbit / sec. Thanks in advance, RayQuang UPDATE: sorry I forgot to mention it, the platform that I will be using is PHP with the APC code cache, Probably running Debian.

  Read the article

• Make eix available version match emerge

  - by Ryaner

  We have out Gentoo hosts using a binhost with EMERGE_DEFAULT_OPTS="--getbinpkgonly --usepkgonly" in the make.conf file so that the host only pulled down the binary hosts. All works well from that side. I use eix to check on software versions for upgrades but have hit a problem where eix will see an available version ahead of what is available on the binserver. Using glibc as an example ietpl [VE] / # emerge -s glibc Searching... [ Results for search key : glibc ] [ Applications found : 1 ] * sys-libs/glibc Latest version available: 2.14.1-r3 Latest version installed: 2.14.1-r3 Homepage: Description: GNU libc6 (also called glibc2) C library License: LGPL-2 Then eix reports a higher version available ietpl [VE] / # export LASTVERSION='{last}<version>{}' ietpl [VE] / # /usr/bin/eix --nocolor --format '<category> <name> [<installedversions:LASTVERSION>] [<bestversion:LASTVERSION>] \n' --exact --category-name sys-libs/glibc sys-libs glibc [2.14.1-r3] [2.15-r2] What I'm after is for eix to report the latest version available as 2.14.1-r3 like emerge. I've a feeling this is possible since without any formatting, eix returns Available versions: (2.2) ~2.9_p20081201-r3!s 2.10.1-r1!s 2.11.3!s ~2.12.1-r3!s 2.12.2!s{tbz2} ~2.13-r2!s 2.13-r4!s ~2.14!s ~2.14.1-r2!s 2.14.1-r3!s{tbz2} ~2.15-r1!s 2.15-r2!s ~2.15-r3!s **2.16.0!s **9999!s correctly tagging the latest unmasked binary package with {tbz2} I would have thought that the binary flag would do it, but that returns no matches --binary Match packages with *.tbz2 files.

  Read the article

• Video adapter problem on new motherboard

  - by Dmitriy Matveev

  Something bad happened to my PC several days ago. I wasn't near my PC, so I have no idea about what happened it was just halted. When I tried to boot it was entering infinite loops of a few seconds power up (cpu, hdds, etc) and then power down. I've tried to boot the system with no additional components (that includes hdd, video, network adapters and even memory) connected and that didn't solved the problem, so I've made a decision that most likely it's either some a problem with power unit or with motherboard. I've tried to replace my power unit by another one (which was expected to be working) and the problem didn't resolved again. I've bought a new MB (ASUS P5KPL-AM SE) and tried to get it running with my old CPU and memory (I hope it's still alive). Since this MB include on-board video I've tried to run the PC without installation of mine video. The PC wasn't running and the BIOS was beeping one long signal following by two short (Does it means a video problem?). After that I've installed my video adapter to PCI-E slot and tried to boot the system again and the BIOS was beeping the same. I don't get it. I may expect some problem with CPU and/or memory since I don't know what happened to my PC (maybe some power failure or something different), but not with video and not with on-board video on newly bought MB. How can I understand what's wrong with my system now?

  Read the article

• Connection reset to some websites

  - by user143271

  I'm using a 2wire 3600HGV modem/router. Starting around this afternoon, any time I try to access anything from i.imgur.com I get The connection to i.imgur.com was interrupted in chrome, and the actual error is Error 101 (net::ERR_CONNECTION_RESET). It's network wide (tested multiple browsers on multiple computers and phones). I can access imgur.com just fine, but nothing from its content server i.imgur.com. If I disable wifi on my phone and use its 4G connection, I can access it just fine, so obviously imgur isn't down. I haven't changed any configuration on the router, and I have tried changing DNS servers (I tried google and OpenDNS). It also seems that imgur is not the only site; howtogeek and a couple of others seem to have the same problem. It looks like they are all edgecast cdn content servers, but not all edgecast cdn servers fail. Tumblr, for instance, works just fine. Does anyone have any idea what would be causing this? EDIT: Related to the edgecast remark, it would appear that this is a specific edgecast server: gs1.wpc.edgecastcdn.net. Tumbler's content is on gs1.wac.edgecastcdn.net, so it might be on a different server. Edit #2: These sites all respond to ping just fine as well.

  Read the article

• Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

  - by ShimmerGeek

  My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

  Read the article

• Hosting options for data-enabled web application

  - by Hertfordian

  I am independently developing an asp.net business application with a MySQL database. I currently have a Windows web hosting account which includes MySQL and MS SQL as installed supported options. I am not yet finally committed to using MySQL and I want to keep my options open to evaluate MS SQL and possibly other options such as PostGreSQL later when more of the business logic is in place - my data access layer will handle the database connectivity. The web hosting setup I have now is fine for development purposes, but if in future I want to use, say, PostGreSQL Server, and a level of usage of, say, 10,000 hits per day concentrated in business hours, I'm assuming I'll need a dedicated server. But in that case, should I just install PostGreSQL on the dedicated server, or is best practice to have a separate database server - perhaps locked down so that it can only be accessed through the web server? And supposing it was only 2000 hits a day - how would that change things? I'd appreciate it if anyone could point me in the direction of a useful guide to these sorts of issues. Naturally if I start paying for separate servers, I would like to know exactly why I'm doing it and what the performance issues and thresholds are.

  Read the article

• Set up layer 2 vlan between 2 data centres

  - by user41679

  Hello, Our data centre provider operates 2 sites, and we currently have equipment in one and would like to have equipment in the second. They've told me that they operate a layer 2 vlan between the 2 sites over a 20gbit connection, and that they'd just give me ethernet cable at each end to connect the locations. At the current site, we have Cisco 2960 48TC-L switches, all the machines are on a 192.168.x.x subnet and we have cisco firewalls with which we connect to our internet provider with. My question is what would I need to do to connect the 2 sites? could I just plug the ethernet cables the provide into the cisco switches, and have the same switches the other end? would I need to set up a separate internal network on the other side and connect both through the firewalls? Would the cisco switches need special configuration? We expect to maintain a number of connections between the 2 sites, and each site would have its own internal dns name like dc1.xx.com. Sorry if I'm being vague or haven't included enough information, I've a fairly good knowledge of hardware but we're down a netops guy at the moment and I'd like to get both sites on-line ASAP! Thanks in advance!

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• Network outage caused by SMC8013WG Cable Modem/Router ?

  - by mkocubinski

  At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

  Read the article

• Reasons for Ajax navigation breaking on Coldfusion/Apache when running an app in iOS fullscreen mode? [closed]

  - by frequent

  Not sure if this belongs to SO or here. I'm running a webApp using jquery, jquerymobile, requireJS and apache, coldfusion8, mysql 5.0.88 serverside. The app works fine until I try to run it in fullscreen mode on iOS (add icon to homescreen, launch app from there with <meta name="apple-mobile-web-app-capable" content="yes" /> specified). This meta tag will break the Jquery Mobile AJAX navigation. The AJAX request will fail and the requested page will be loaded as a new page, thereby restarting the app on every page change. I have chased this through the whole front end starting from requireJS through Jquery Mobiles AJAX navigation down to the AJAX request being made in Jquery. xhr.send( ( s.hasContent && s.data ) || null ); In regular browser this works no problem. In fullscreen mode, this fails (readystate=0, empty response). I have found this article, which argues that fullscreen mode is like a browser instance with different HTTP strings. On ASP.net this results in the browser not being identified by the server and only basic browser settings being assumed (e.g. no Javascript). I'm a little lost where to start looking for possible reasons serverside. I have not written any server code for handling Ajax page navigation, so this must be something that is handled out of the box by Coldfusion or Apache? Question: Where could I start looking for problable causes of fullscreen mode breaking AJAX navigation if I assume Coldfusion or Apache are the culprits? Is there a setting I'm missing in httpd.config? What else could be the problem? Thanks for inputs!

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

  - by Favourite Chigozie Onwuemene

  Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look? Edit: SQL Server Version is 9.0.4035

  Read the article

• how to throttle http requests on a linux machine?

  - by hooraygradschool

  EDIT: here is the summery: i need to reduce max connections preferably system wide on Ubuntu 11.04 but at least within Google Chrome. i do not need or want to throttle bandwidth, Verizon seems to only care about the number of connections so that is all i want to change. also, i don't want to use firefox unless i have to, i have three other machines all using chrome and synced and i just prefer it over firefox. i use tethering for my home internet connection via my verizon cell phone. without paying for it. this works just fine for streaming netflix via my nintendo wii and pretty much every other conceivable use ive had for it. except, during heavy usage with multiple tabs open on my laptop, the network connection on my phone will just turn off, then on again, then off, but it never fully connects. i think, based on this and other questions that this is caused by verizon getting too many http requests from my phone. is there some software, script, setting or otherwise that would allow me to throttle my requests to say, 5 or 10 or whatever it turns out is 1 less than verizon is looking for, so that my cell's network connection is not lost? i would far prefer a slow down rather than complete shut off of my internet connection. i am almost certain is from quantity of requests and not related to data, because, as i mentioned, netflix will run all day without a hitch, and that uses more data than anything else i would be doing. if i had a router i am pretty sure there are settings i could easily change to only allow so many requests at a time ... but in this case, my phone is my router, so no settings. im using ubuntu 11.04 on my netbook with an htc incredible on verizon (not that the phone details are relevant) i have been trying to figure this out for quite some time, currently the only fix is ensure that all requests are stopped and then sometimes it works again, other times i have to manually turn my 3g service off and then back on. thank you so much for any assistance!

  Read the article

• Did Windows 7 Startup Repair trash My Documents?

  - by Metaphile

  Earlier today, I rebooted my computer. Partway through the boot process, it shut down suddenly. When I tried again, I was prompted to run Startup Repair, and I did. Afterwards, my computer booted normally and everything seemed to be in order. Then I noticed that my My Documents folder contains a mix of old and new files. On closer inspection, it appears that Windows has reverted my system to a previous state. Two things puzzle me: 1) According to Microsoft, "System Restore does not affect personal files, such as e-mail, documents, or photos [...]", yet many of my personal files have been affected. 2) Why were some things reverted, but not others? I had recently reorganized a bunch of files in My Documents. The reverted directory structure seems to be a hybrid of old a new, with a lot of new stuff missing. It's hard to say for sure, but it looks like the stuff that's missing would have been in conflict (two folders with the same name, for example), and Windows favored the old stuff. Is this normal behavior for Startup Repair/System Restore? To modify personal files, I mean? Is there a pattern to the mess it's made of My Documents?

  Read the article

• vmware server 64 bit on ubuntu 9.10 64 bit with P2V windows 2003 SBS poor network speed

  - by RobertHC

  configuration is ubuntu 2.6.31-21 64 bit vmware 2.0.2 64 bit last release hardware is core 2 quad with 8GB ram guest is win 2003 server SBS 32 bit Dear friends, we have a converted physical to virtual windows sbs 2003, converted with last converter available nowadays http://www.vmware.com/products/converter/ vCenter converter. Running the P2V 2K3 SBS on vmware server, it does boot fine, but we do note an abnormal CPU activity and a poor lan speed. As attempts we did what follow. We removed all unneeded peripherals, we removed one NIC (phisycal server was 2 nics), we changed the vmx to ged the nic recognized as intel instead than amd, we removed 1 cpu (physical was 2 cpu), we removed anything was reported as failed driver from system events monitor. Nothing to do, no way and funny results. Let's read some tests results. All are made with the same file copied in different source folders. Copying from client side (both directions copy, to/from server) results are i.e. 10 seconds, copying the same files from server side (again from and to server) results are different... from client to server, speed is round about (bit more) 10 seconds, but from server to client direction is slower: double the time. Beeing very fast and launching a simultaneous copy "from server to client"+"from client to server", this made from the server side, results in a stuck traffic... 45 seconds to do the copy. vmware tools are installed and e1000 driver has been updated. With one processor CPU activity is still going up and down but much less than with two. Because of test, we installed win 2k8 STD 64 bit. We repeated all the above tests with exactly the same file result is just one: always 5 seconds (this matches the lan speed) Any idea about this issue is welcome and thank you if any. Kind regards R.

  Read the article

< Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >