Search Results

Search found 14576 results on 584 pages for 'community building'.

Page 545/584 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

• Consuming SharePoint Web Services fails when behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. The normal -dhttp.proxyHost ... settings does not seam to help any. But I have found that by creating a ProxySelector class and setting it as default, I can regain access to the authentication web service, but I still can't retrieve the list of web sites from the SharePoint server. Anyone have any experience on how to make this work? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text When running the code from a network behind a proxy server, I successfully retrieve the Authentication mode from the server, but the request for the Web Site list generates an exception originating at: com.sun.xml.internal.ws.transport.http.client .HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:201) The output from the source when no proxy is on the network is listed below: Successfully retrieved the SharePoint WebService response for Authentication SharePoint authentication method is: WINDOWS Calling Web Service to retrieve list of web site. Web Service call response: -------------- XML START -------------- <Webs xmlns="http://schemas.microsoft.com/sharepoint/soap/"> <Web Title="Collaboration Lab" Url="http://host.domain.com/collaboration"/> <Web Title="Global Data Lists" Url="http://host.domain.com/global_data_lists"/> <Web Title="Landing" Url="http://host.domain.com/Landing"/> <Web Title="SharePoint HelpDesk" Url="http://host.domain.com/helpdesk"/> <Web Title="Program Management" Url="http://host.domain.com/programmanagement"/> <Web Title="Project Site" Url="http://host.domain.com/Project Site"/> <Web Title="SharePoint Administration Tools" Url="http://host.domain.com/admin"/> <Web Title="Space Management Project" Url="http://host.domain.com/spacemgmt"/> </Webs> -------------- XML END -------------- Br Jan

  Read the article

• Chatbot client and class modification

  - by blake

  ChatBot Class Modification: Modify the reply() method of the ChatBot class to recognize additional words and phrases. Part 1: Everyone must complete this section. When the userInput parameter value is: The reply method should return: how do I quit enter quit how do I exit enter quit how do I stop enter quit how do I ____ do you really want to do that how are you I'm fine how ______ I don't know Add two additional words or phrases to recognize and respond to. ChatBot Client Modification: Modify the ChatBot client application to loop until the end-user enters "quit". Here is my service class / ** * Java Chatbot Service class * @author Blake * 3/5/2012 */ /** * Default constructor. */ public class Chatbot { private String name; /** Users name */ private String introbot; /** Name of the Chatbot */ private String reply; /** Replies to the input of the string name and string introbot */ /** * Constructs mutebot object * @param mutebow - returns name of mutebot */ public Chatbot() { name = "MuteBot"; } /** * Changes Name * @param name - new name */ public void setName (String n) { name = n; } /** * Accesses name * @return a brand new name */ public String getName() { return name; } /** * Accesses introbot * @return name of mutebot */ public String introbot() { String intro = "Hello! My name is " + name; return intro; } /** * Accesses replay(String newuserinput) * @return introbot reply to user input */ public String getreply(String newuserinput) { String reply = "I'm just learning to talk"; if (newuserinput.equalsIgnoreCase("What")) reply = "Why do you ask?"; else if (newuserinput.equalsIgnoreCase("Why") ) reply = "Why Not"; else if (newuserinput.equalsIgnoreCase("How")) reply = "I don't know!"; else if (newuserinput.equalsIgnoreCase("Where") ) reply = "Anne Arundel Community College"; else if (newuserinput.equalsIgnoreCase("When")) reply = "Tomorrow"; else if (newuserinput.equalsIgnoreCase("how do I quit")) reply = "enter quit"; else if (newuserinput.equalsIgnoreCase("how do I exit")) reply = "enter quit"; else if (newuserinput.equalsIgnoreCase("how do I stop")) reply = "enter quit"; else if (newuserinput.equalsIgnoreCase("how are you")) reply = "I'm fine"; else if (newuserinput.equalsIgnoreCase("how do you do")) reply = "I am doing well"; else if (newuserinput.equalsIgnoreCase("how do I get out")) reply = "By going through the door"; else if (newuserinput.indexOf("how do I" ) ==0) { String substring = newuserinput.substring(8); reply = "do you really want to do that" + substring; } else if (newuserinput.indexOf("how" ) ==0) { String substring = newuserinput.substring(10); reply = "I don't know" + substring ; } return reply; } } Here is my client/application class /** * Java Chatbot Client class * @author Blake * 3/5/2012 */ import java.util.Scanner; public class ChatbotClient { public static void main(String[] args) { Scanner input = new Scanner(System.in); Chatbot t = new Chatbot(); System.out.print("What is your name? "); String name = input.nextLine(); System.out.println(t.introbot()); System.out.print(name + "> "); String reply = input.nextLine(); System.out.println(t.getName() + "> " + t.getreply(reply)); //while (reply < quit) /*{ quit++ i = i + 1 }*/ } } I don't know what I am doing wrong with this part right here Modify the ChatBot client application to loop until the end-user enters "quit". I am trying to create a while loop which will continue until user says quit.

  Read the article

• How to integrate Purify into Hudson CI?

  - by Martin

  Hello everybody! I have a Hudson CI system set up and for the moment it is used for building a project and running some unit tests. My next step is to integrate the memory leak detector Purify into the build cycle. Now I want to start the unit tests also inside purify and for this I have created a new batch task which runs following command: purify.exe /SaveTextData MyExecutable.exe --test TestLibrary.dll --output xml As I read in the Purify documentation the /SaveTextData option is used in order to run purify not in GUI mode. If I run this command on my local workstation in the command line it works perfectly. But in case it is started by Hudson, nothing happens. Unfortunetly there are no logs of purify... Has someone ever tried to start purify either by Hudson or any other CI system? Thanks in advance. Best regards Martin EDIT: I forgot to tell you, that I have Hudson running as master and slave on different computers. On the master I have configured a task which should start the unit tests within purify on the slave. I am running the slave via JNLP. EDIT 18.03.2010: Ok, so finally I am a bit closer the source of the problem. I have discovered, that running my unit tests in purify locally the log file EngineCmdLine.log contains three commands. I am starting purify with following command: purify.exe /SaveTextData TestRunnerConsoleWD.exe --test TestDemoWD.dll Output of EngineCmdLine.log when starting purify manually: File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestRunnerConsoleWD.exe File: C:\WINDOWS\system32\ws2_32.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll Output when starting via Hudson: File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestRunnerConsoleWD.exe File: C:\WINDOWS\system32\ws2_32.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll The error output of purify: Instrumenting: BtcTestDemoWD.dll 313856 bytes Purify: While processing file D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TESTFWWD.DLL: Error: Cannot replace file c:\Programme\IBM\RationalPurifyPlus\PurifyPlus\cache\BTCTESTFWWD$Purify_D_workspace_hudson_workspace_Purify_TestFW_CommonsCoreTest_Cpp_msvs9.DLL. Is it in use? TESTFWWD.DLL 505344 bytes Unable to instrument D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll (0x1) Question is, why is purify starting twice a command with the TestDemoWD.dll library?

  Read the article

• Adding Parsekit To An Xcode Project

  - by Garry

  I am trying to add the Parsekit framework to my OSX Xcode project. I've never added a 3rd party framework before and I can't get it to work right. I dragged the included Xcode project into my 'Groups & Files' pane and chose to Add it to my project. I then dragged Parsekit.framework underneath the Link Binary With Libraries heading. Then I double-clicked my target app and added Parsekit as a Direct Dependency. I also added libicucore.dylib as a Linked Library (as it says to do this on their site). Finally, in the Build settings tab of my target info I set the Header Search Paths to /Users/path/to/include/directory and the Other Linker Flags to -ObjC -all_load. Running this as a debug build work fine with no errors. However, when I build my app to release and then try to run the executable created, the app fails to load with the following error message: MyApp cannot be opened because of a problem. Check with the developer to make sure myApp works with this version of Mac OS X. Here is the dump from the crash reporter: Process: MyApp [11658] Path: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Identifier: com.yourcompany.MyApp Version: ??? (???) Code Type: X86-64 (Native) Parent Process: launchd [135] Date/Time: 2010-05-24 17:08:08.475 +0100 OS Version: Mac OS X 10.6.3 (10D573) Report Version: 6Interval Since Last Report: 133300 sec Crashes Since Last Report: 3 Per-App Crashes Since Last Report: 3 Anonymous UUID: DF0265E4-B5A0-45E1-8B71-D52A27CFDDCA Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000002, 0x0000000000000000 Crashed Thread: 0 Dyld Error Message: Library not loaded: @executable_path/../Frameworks/ParseKit.framework/Versions/A/ParseKit Referenced from: /Users/Garry/Programming/Xcode/Mac/MyApp/build/Release/MyApp.app/Contents/MacOS/MyApp Reason: image not found Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.53 GHz, 4 GB, SMC 1.47f2 Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB Memory Module: global_name AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.91.27) Bluetooth: Version 2.3.1f4, 2 service, 2 devices, 1 incoming serial ports Network Service: AirPort, AirPort, en1 Network Service: Ethernet Adaptor (en6), Ethernet, en6 Serial ATA Device: Hitachi HTS545025B9SA02, 232.89 GB Serial ATA Device: HL-DT-ST DVDRW GS23N USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0x26500000 USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x04600000 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8213, 0x06110000 After building the app, in addition to the executable file, Xcode is also creating a file called MyApp.app.dSYM. Any idea what that is?? I am developing with Xcode 3.2.2 on an Intel MBP running 10.6.3. Many thanks for any help offered.

  Read the article

• Trouble cross-referencing two XML child nodes in AS3

  - by Dwayne

  I am building a mini language translator out of XML nodes and Actionscript 3. I have my XML ready. It contains a series of nodes with two children in them. Here is a sample: <translations> <entry> <english>man</english> <cockney>geeza</cockney> </entry> <entry> <english>woman</english> <cockney>lily</cockney> </entry> </translations> The AS3 part consist of one input box named "textfield_txt" where the English word will be typed in. An output text field for the translation called "cockney_txt". Finally, one button to execute the translation called "generate_mc". The idea is to have actionscript look through the XML for key English words after the user types it in the "textfield", cross-freferences the children then returns the Cockney translation as a value. The trouble is, when I test it I get no response or error messages- it's completely silent. I'm not sure what I'm doing wrong. At present, I have setup a conditional statement to tell me whether the function works or not. The result is, no it's not! Here's the code below. I hope someone can help. Cheers! generate_mc.buttonMode=true; var English:String; var myXML:XML; var myLoader:URLLoader = new URLLoader(); myLoader.load(new URLRequest("Language.xml")); myLoader.addEventListener(Event.COMPLETE, processXML); function processXML(e:Event):void { myXML = new XML(e.target.data); } generate_mc.addEventListener(MouseEvent.CLICK, onClick); function onClick(event:MouseEvent) { English = textfield.text; cockney_txt.text = myXML.translations.entry.cockney; if(textfield.text.toLowerCase() == myXML.translations.entry.english.toLowerCase){ //return myXML.translations.entry.cockney; trace("success"); }else{ trace("try again!"); // ***I get this as a result } }

  Read the article

• Have problems designing input and output for a calculator app

  - by zoul

  Hello! I am writing a button calculator. I have the code split into model, view and a controller. The model knows nothing about formatting, it is only concerned with numbers. All formatting is done in the view. The model gets its input as keypresses, each keypress is a part of an enum: typedef enum { kButtonUnknown = 0, kButtonMemoryClear = 100, kButtonMemoryPlus = 112, kButtonMemoryMinus = 109, kButtonMemoryRecall = 114, kButtonClear = 99, … }; When the user presses a button (say 1), the model receives a button code (kButtonNum1), adds the corresponding number to a string input buffer ("1") and updates the numeric output value (1.0). The controller then passes the numeric output value to the view that formats it (1). This is all plain, simple and clean, but does not really work. The problem is that when user enters a part of a number (say 0.00, going to enter 0.001), the input does not survive the way through model to view and the display says 0 instead of 0.00. I know why this happens ("0.00"::string parses to 0::double and that gets formatted as 0). What I don’t know is how to design the calculator so that the code stays clean and simple and the numbers will show up on screen exactly as the user types them. I’ve already come with some kind of solution, but that’s essentially a hack and breaks the beautiful and simple flow from the calculator model to the display. Ideas? Current solution keeps track of the calculator state. If the calculator is building a number, I take the calculator input buffer (a string) and directly set the display contents (also a string). Otherwise I take the proper path, ie. take the numeric calculator output, pass it to the view as a double and the view uses its internal formatter to create a string for the display. Example input: input | display | mode ------+---------+------------ 0 | 0 | from string 0. | 0. | from string 0.0 | 0.0 | from string 0.0+ | 0 | from number This is ugly. (1) The calculator has to expose its input buffer and state. (2) The view has to expose its display and allow setting its contents directly using a string. (3) I have to duplicate some of the formatting code to format the string I got from the calculator input buffer. If user enters 12345.000, I have to display 12,345.000 and therefore I’ve got to have a commification code for strings. Yuck.

  Read the article

• Installing Enclosure with Netbeans

  - by jdknewb

  Hi all, I am having trouble installing Enclosure and getting it to work. I have followed this guide http://www.enclojure.org/gettingstarted and successfully installed Enclosure (I think). However, when I try to build the sample application (labrepl) I get a bunch of errors and a failed build. I haven't used Java in a long time and I've never used Netbeans, and the error doesn't seem very helpful with my limited knowledge of this domain. I'm using the latest Netbeans and the Enclosure URL from the guide. Since I am on Windows, I can't use git to clone the repo, so I'm not sure what to do from here. Anyway, here are the error messages. WARNING: You are running embedded Maven builds, some build may fail due to incompatibilities with latest Maven release. To set Maven instance to use for building, click here. Scanning for projects... [#process-resources] [resources:resources] Using default encoding to copy filtered resources. [#compile] [ERROR]Transitive dependency resolution for scope: compile has failed for your project. [ERROR]Error message: Missing: [ERROR]---------- [ERROR]1) org.clojure:clojure-contrib:jar:1.2.0-master-SNAPSHOT [ERROR] Try downloading the file manually from the project website. [ERROR] Then, install it using the command: [ERROR] mvn install:install-file -DgroupId=org.clojure -DartifactId=clojure-contrib -Dversion=1.2.0-master-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file [ERROR] Alternatively, if you host your own repository you can deploy the file there: [ERROR] mvn deploy:deploy-file -DgroupId=org.clojure -DartifactId=clojure-contrib -Dversion=1.2.0-master-SNAPSHOT -Dpackaging=jar -Dfile=/path/to/file -Durl=[url] -DrepositoryId=[id] [ERROR] Path to dependency: [ERROR] 1) labrepl:labrepl:jar:0.0.1 [ERROR] 2) org.clojure:clojure-contrib:jar:1.2.0-master-SNAPSHOT [ERROR]---------- [ERROR]1 required artifact is missing. [ERROR]for artifact: [ERROR] labrepl:labrepl:jar:0.0.1 [ERROR]from the specified remote repositories: [ERROR] central (http://repo1.maven.org/maven2), [ERROR] clojars (http://clojars.org/repo/), [ERROR] incanter (http://repo.incanter.org), [ERROR] clojure-snapshots (http://build.clojure.org/snapshots), [ERROR] clojure (http://build.clojure.org/releases), [ERROR] clojure-releases (http://build.clojure.org/releases) [ERROR]Group-Id: labrepl [ERROR]Artifact-Id: labrepl [ERROR]Version: 0.0.1 [ERROR]From file: C:\Users\chloey\Documents\NetBeansProjects\RelevanceLabRepl\pom.xml ------------------------------------------------------------------------ For more information, run with the -e flag ------------------------------------------------------------------------ BUILD FAILED ------------------------------------------------------------------------ Total time: 1 second Finished at: Wed Jun 09 21:53:04 CDT 2010 Final Memory: 72M/172M ------------------------------------------------------------------------ Thanks all.

  Read the article

• How to get an X11 Window from a Process ID ?

  - by Adam Pierce

  Under Linux, my C++ application is using fork() and execv() to launch multiple instances of OpenOffice so as to view some powerpoint slide shows. This part works. Next I want to be able to move the OpenOffice windows to specific locations on the display. I can do that with the XMoveResizeWindow() function but I need to find the Window for each instance. I have the process ID of each instance, how can I find the X11 Window from that ? UPDATE - Thanks to Andy's suggestion, I have pulled this off. I'm posting the code here to share it with the Stack Overflow community. Unfortunately Open Office does not seem to set the _NET_WM_PID property so this doesn't ultimately solve my problem but it does answer the question. // Attempt to identify a window by name or attribute. // by Adam Pierce <[email protected]> #include <X11/Xlib.h> #include <X11/Xatom.h> #include <iostream> #include <list> using namespace std; class WindowsMatchingPid { public: WindowsMatchingPid(Display *display, Window wRoot, unsigned long pid) : _display(display) , _pid(pid) { // Get the PID property atom. _atomPID = XInternAtom(display, "_NET_WM_PID", True); if(_atomPID == None) { cout << "No such atom" << endl; return; } search(wRoot); } const list<Window> &result() const { return _result; } private: unsigned long _pid; Atom _atomPID; Display *_display; list<Window> _result; void search(Window w) { // Get the PID for the current Window. Atom type; int format; unsigned long nItems; unsigned long bytesAfter; unsigned char *propPID = 0; if(Success == XGetWindowProperty(_display, w, _atomPID, 0, 1, False, XA_CARDINAL, &type, &format, &nItems, &bytesAfter, &propPID)) { if(propPID != 0) { // If the PID matches, add this window to the result set. if(_pid == *((unsigned long *)propPID)) _result.push_back(w); XFree(propPID); } } // Recurse into child windows. Window wRoot; Window wParent; Window *wChild; unsigned nChildren; if(0 != XQueryTree(_display, w, &wRoot, &wParent, &wChild, &nChildren)) { for(unsigned i = 0; i < nChildren; i++) search(wChild[i]); } } }; int main(int argc, char **argv) { if(argc < 2) return 1; int pid = atoi(argv[1]); cout << "Searching for windows associated with PID " << pid << endl; // Start with the root window. Display *display = XOpenDisplay(0); WindowsMatchingPid match(display, XDefaultRootWindow(display), pid); // Print the result. const list<Window> &result = match.result(); for(list<Window>::const_iterator it = result.begin(); it != result.end(); it++) cout << "Window #" << (unsigned long)(*it) << endl; return 0; }

  Read the article

• Clear data at serial port in Linux in C?

  - by ipkiss

  Hello guys, I am testing the sending and receiving programs with the code as The main() function is below: include include include include include include include "read_write.h" int fd; int initport(int fd) { struct termios options; // Get the current options for the port... tcgetattr(fd, &options); // Set the baud rates to 19200... cfsetispeed(&options, B9600); cfsetospeed(&options, B9600); // Enable the receiver and set local mode... options.c_cflag |= (CLOCAL | CREAD); options.c_cflag &= ~PARENB; options.c_cflag &= ~CSTOPB; options.c_cflag &= ~CSIZE; options.c_cflag |= CS8; // Set the new options for the port... tcsetattr(fd, TCSANOW, &options); return 1; } int main(int argc, char **argv) { fd = open("/dev/pts/2", O_RDWR | O_NOCTTY | O_NDELAY); if (fd == -1) { perror("open_port: Unable to open /dev/pts/1 - "); return 1; } else { fcntl(fd, F_SETFL, 0); } printf("baud=%d\n", getbaud(fd)); initport(fd); printf("baud=%d\n", getbaud(fd)); char sCmd[254]; sCmd[0] = 0x41; sCmd[1] = 0x42; sCmd[2] = 0x43; sCmd[3] = 0x00; if (!writeport(fd, sCmd)) { printf("write failed\n"); close(fd); return 1; } printf("written:%s\n", sCmd); usleep(500000); char sResult[254]; fcntl(fd, F_SETFL, FNDELAY); if (!readport(fd,sResult)) { printf("read failed\n"); close(fd); return 1; } printf("readport=%s\n", sResult); close(fd); return 0; } read_write.h: #include <stdio.h> /* Standard input/output definitions */ include /* String function definitions */ include /* UNIX standard function definitions */ include /* File control definitions */ include /* Error number definitions */ include /* POSIX terminal control definitions */ int writeport(int fd, char *chars) { int len = strlen(chars); chars[len] = 0x0d; // stick a after the command chars[len+1] = 0x00; // terminate the string properly int n = write(fd, chars, strlen(chars)); if (n < 0) { fputs("write failed!\n", stderr); return 0; } return 1; } int readport(int fd, char *result) { int iIn = read(fd, result, 254); result[iIn-1] = 0x00; if (iIn < 0) { if (errno == EAGAIN) { printf("SERIAL EAGAIN ERROR\n"); return 0; } else { printf("SERIAL read error %d %s\n", errno, strerror(errno)); return 0; } } return 1; } and got the issue: In order to test with serial port, I used the socat (https://help.ubuntu.com/community/VirtualSerialPort ) to create a pair serial ports on Linux and test my program with these port. The first time the program sends the data and the program receives data is ok. However, if I read again or even re-write the new data into the serial port, the return data is always null until I stop the virtual serial port and start it again, then the write and read data is ok, but still, only one time. (In the real case, the sending part will be done by another device, I am just taking care of the reading data from the serial port. I wrote both parts just to test my reading code.) Does anyone have any ideas? Thanks a lot.

  Read the article

• What was your the most impressive technical programming achievement performed to impress a romantic

  - by DVK

  OK, so the archetypal human story is for a guy to go out and impress the girl with some wonderful achievement like slaying a dragon or building a monument or conquering neighboring tribe. This being enlightened 21st century on SO, let's morph this into a: StackOverflower performing a feat of programming to impress a romantic interest. There are two ways to do this: Technical achievement: Impressing a person with suitable background/understanding of programming with actual coding powerss you displayed. A dumb movie example would be that kid in "Hackers" move showing off his hacking skills in front of Angeline Jolie. Artistic achievement: Impressing a person with a result of running said code, whether they understand just how incredible the code itself is. An example is the animated ANSI rose (for a guy who actually wrote the ANSI code) This question is only about the first kind (technical achievements) - e.g. the person of interest was presented with impressive code/design that (s)he was able to properly appreciate. Rules (what doesn't qualify): The target audience must have been a person of romantic interest (prospective or present significant other or random hook-up). E.g. showing your program to your sister who's also a software developer doesn't count. The achievement must have been done specifically with the goal to impress such a person. However, it is OK if the achievement was done to impress a generic qualifying person, not someone specific. Although... if you write code to impress girls in general, I'd say "get a better idea of the opposite sex" The achievement must have been done with the goal of impressing the person. In other words, if you would have done it without romantic interest's knowledge anyway, it doesn't count. As examples, the following does not count: programming for your job. Programming for a coding contest. Open Source program that you'd have done anyway. The precise nature of the awesomeness of the achievement is somewhat irrelevant - from learning entire J2EE in 2 days to writing fancy game engine to implementing Python compiler in LOGO. As long as it's programming/software development related. The achievement should preferably be something other people would rank highly as well. If your date was impressed with your skill at calculating Fibonacci sequence without recursive function calls, it doesn't mean most developers will be. But it does mean you need to start finding better things to do on dates ;)

  Read the article

• Is this way of storing typed objects in memory good?

  - by Pindatjuh

  This is an "is this okay, or can it be done better" question. Topic: Storing typed objects in memory. Background information: I'm building a compiler for the x86-32 platform for my language. My goal includes typed objects. Idea: Every primitive is a semi-class (it can be used as if it was a normal class, but it's stored more compact). Every class is represented by primitives and some meta-data (containing class-properties, inheritance stuff, etc.). The meta-data is complex: it doesn't use fields but instead context-switches. For primitives, the meta-data is very small, compared to a "real" class, which is alot bigger. This enables another idea that "primitives are objects", in my language, which I found nessecairy. Example: If I have an array of 32 booleans, then the pure content of this array is exactly 4 byte (32 bits of booleans). The meta-data will contain flags that the type is an array of booleans, which contains 32 entries. The meta-data is very compacted, on bit-level: using a sort of "packing" mechanism, which is read by a FSM at runtime, when doing inspection of the type (like when passing the object to methods for checking, etc.) For instance (read from left to right, top to bottom, remember vertical possition when going to the right, and check nearest column header for meaning of switch): Primitive? Array? Type-Meta 1 Byte? || Size (1 byte) 1 1 [...] 1 [...] done 0 2 Bytes? || Size (2 bytes) 1 [...] done || Size (4 bytes) 0 [...] done Integer? 1 Byte? 2 Bytes? 0 1 0 1 done 1 done 0 done Boolean? Byte? 0 1 0 done 1 done More-Primitives 0 .... Class-Stuff (Huge) 0 ... (After reaching done the data is inserted. || = byte alignement. [...] is variable sized. ... is not described here, for simplicity. And let's call them cost-based-data-structures.) For an array of 32 booleans containing all true values, the memory for this type would be (read top-down): 1 Primitive 1 Array 1 ArrayType: Primitive 0 Not-Array 0 Not-Integer 1 Boolean 0 Not-Byte (thus bit) 1 Integer Size: 1 Byte 00100000 Array size 11111111 11111111 11111111 11111111 Data Thus, 8 bytes represent 32 booleans in an array: 11100101 00100000 11111111 11111111 11111111 11111111 Is this okay, or can it be done better?

  Read the article

• not sure if this is my mistake ~~ vs2010 Add Service Reference fails

  - by gerryLowry

  https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter the above is from Taleo's API guide. I'm trying to create a WCF Client (e.g.: " Creating Your First WCF Client" http://channel9.msdn.com/shows/Endpoint/Endpoint-Screencasts-Creating-Your-First-WCF-Client/ ) The tbe.taleo... link is from Taleo's API documentation. Likely my understanding is flawed. My assumption is that when the link from Taleo is entered into the vs2010 "Add Service Reference" dialog and GO is clicked, then vs2010 should retrieve a proper WSDL/SOAP envelope back from the Taleo link. That does not happen; instead an error occurs. Fiddler2 (http://fiddler2.com) displays the status code 500 "HTTP/1.1 500 Internal Server Error". [FULL DETAILS BELOW] "WcfTestClient.exe" gives a similar error: [WcfTestClient DETAILS BELOW] QUESTION: is it me, or is the Taleo link flawed? Thank you, Gerry [FULL DETAILS "Add Service Reference"] The HTML document does not contain Web service discovery information. Metadata contains a reference that cannot be resolved: 'https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter'. The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 544 bytes of the response were: ' SOAP-ENV:Protocol Unsupported content type "application/soap+xml; charset=utf-8", must be: "text/xml". /MANAGER/dispatcher/servlet/rpcrouter '. The remote server returned an error: (500) Internal Server Error. If the service is defined in the current solution, try building the solution and adding the service reference again. [WcfTestClient DETAILS] Error: Cannot obtain Metadata from https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter If this is a Windows (R) Communication Foundation service to which you have access, please check that you have enabled metadata publishing at the specified address. For help enabling metadata publishing, please refer to the MSDN documentation at http://go.microsoft.com/fwlink/?LinkId=65455.WS-Metadata Exchange Error URI: https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter Metadata contains a reference that cannot be resolved: 'https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter'. The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 544 bytes of the response were: 'SOAP-ENV:ProtocolUnsupported content type "application/soap+xml; charset=utf-8", must be: "text/xml"./MANAGER/dispatcher/servlet/rpcrouter'. The remote server returned an error: (500) Internal Server Error.HTTP GET Error URI: https://tbe.taleo.net/MANAGER/dispatcher/servlet/rpcrouter The HTML document does not contain Web service discovery information.

  Read the article

• Should I use Python or Assembly for a super fast copy program

  - by PyNEwbie

  As a maintenance issue I need to routinely (3-5 times per year) copy a repository that is now has over 20 million files and exceeds 1.5 terabytes in total disk space. I am currently using RICHCOPY, but have tried others. RICHCOPY seems the fastest but I do not believe I am getting close to the limits of the capabilities of my XP machine. I am toying around with using what I have read in The Art of Assembly Language to write a program to copy my files. My other thought is to start learning how to multi-thread in Python to do the copies. I am toying around with the idea of doing this in Assembly because it seems interesting, but while my time is not incredibly precious it is precious enough that I am trying to get a sense of whether or not I will see significant enough gains in copy speed. I am assuming that I would but I only started really learning to program 18 months and it is still more or less a hobby. Thus I may be missing some fundamental concept of what happens with interpreted languages. Any observations or experiences would be appreciated. Note, I am not looking for any code. I have already written a basic copy program in Python 2.6 that is no slower than RICHCOPY. I am looking for some observations on which will give me more speed. Right now it takes me over 50 hours to make a copy from a disk to a Drobo and then back from the Drobo to a disk. I have a LogicCube for when I am simply duplicating a disk but sometimes I need to go from a disk to Drobo or the reverse. I am thinking that given that I can sector copy a 3/4 full 2 terabyte drive using the LogicCube in under seven hours I should be able to get close to that using Assembly, but I don't know enough to know if this is valid. (Yes, sometimes ignorance is bliss) The reason I need to speed it up is I have had two or three cycles where something has happened during copy (fifty hours is a long time to expect the world to hold still) that has caused me to have to trash the copy and start over. For example, last week the water main broke under our building and shorted out the power.

  Read the article

• next line character a huge influence on xmlparser?

  - by jovany

  I have question about a basic xml file I'm parsing and just putting in simple nextlines(Enters). I'll try to explain my problem with this next example. I'm( still) building an xml tree and all it has to do ( this is a testtree ) is put the summary in an itemlist. I then export it to a plist so I can see if everything is done correctly. A method that does this is in the parser which looks like this if([elementName isEqualToString:@"Book"]) { [appDelegate.books addObject:aBook]; [aBook release]; aBook = nil; } else { [aBook setValue:currentElementValue forKey:elementName]; NSString *directions = [NSString stringWithFormat:currentElementValue]; [directionTree = setObject:directions forKey:@"directions"]; } [currentElementValue release]; currentElementValue = nil; } the export for the plistfile happens at the endtag of books. Below is the first xmlfile <?xml version="1.0" encoding="UTF-8"?> <Books><Book id="1"><summary>Ero adn the ancient quest to measure the globe.</summary></Book><Book id="2"><summary>how the scientific revolution began.</summary></Book></Books> This is my output http://img139.imageshack.us/img139/9175/picture6rtn.png If I make some adjustments like here <?xml version="1.0" encoding="UTF-8"?> <Books><Book id="1"> <summary>Ero adn the ancient quest to measure the globe.</summary> </Book> <Book id="2"> <summary>how the scientific revolution began.</summary> </Book> </Books> My directions key with type string remains empty... http://img248.imageshack.us/img248/5838/picture7y.png I never knew that if I just put in an enter it would have such an influence. Does anyone know a solution to this since my real xml file looks like this. ps. the funny thing is I can actually see ( when debugging)my directions string (NSString directions ) fill up with the currentElementValue in both cases.

  Read the article

• CSS rules not getting applied in JSPs ?

  - by lakshmanan

  Im building a web application using struts2. I have an authentication interceptor at the top of all the interceptors (I have set it up as such) which checks whether a user is logged in. If not, it will give a login page as result. In login page, I have some set of standard CSS rules which I use for all the JSPs in the app. But that login page coming via that interceptor is not getting applied with CSS rules. Don't know why. Here is my JSP login page. <%@ page language="java" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%> <%@ taglib prefix="s" uri="/struts-tags" %> <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <link rel="stylesheet" href="styles/styles.css" type="text/css" /> <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1"> <title>Projit Login </title> </head> <body> <div id="header"> <h1>Projit</h1> </div> <div id="col1"> <s:form action="/login.action"> <s:textfield name="some field" label="Enter somefield" /> <s:textfield name="username" label="Username" /> <s:password name="password" label="Password" /> <s:submit value="Sign In" /> </s:form> </div> <div id="col2"> <h3>Login</h3> </div> <div id="footer"> some footer </div> </body> </html> the css file is present in WebContent/styles/styles.css I am using eclipse for development. this problem of CSS rules not getting applied occurs at times for other jsps as well inspite of the CSS file being present in the correct location. I guess there must be some URL thing behind this problem. I have tried hard but it is not working till now. Please help.

  Read the article

• notification scheduling question

  - by sims

  Hi Stackers! I'm building an app that needs to send out notifications to users depending on user definable "notifications". So the notifications are not per event. They are arbitrary. A cron job should query the database and send out emails when it finds an event with matching criterion. The is a scheduling app. So naturally, one of the criterion is time. I think I've figured it out, but I'm sure there are better ideas out there as it seems to be a fairly common thing to do. I think I'll limit the users ability to "minutes before hand" to get notified as opposed to seconds or hours. So I have an eventA and notificationA. notificationA should be triggered if an event is due within 45 minutes. So eventA starts at 17:30. The user should be notified at 16:45. But the cron job might not run exactly at 00 seconds. So when the difference is not 45 minutes and 0 seconds it is, say, 45 minutes and 5 seconds. Notification time is past. Email doesn't get sent. User misses event. Shugar. We should also take into account that the cron job might take a long time to run. So maybe we should only trigger it every 5 minutes. So we need a bigger interval maybe. So then my guess would be to say that: if ((eventDueTime - now notificationTimeValue - interval) && (eventDueTime - now < notificationTimeValue + interval)) sendTheFrikinNotificationAlready(); It seems kind of risky if the there are thousands of notifications to send out. I guess I could make a thread for each notification and then a thread for each event that matches the criterion. That might help. Does that make sense? Any other ideas? Thanks!

  Read the article

• How can I import one Gradle script into another?

  - by Ant

  Hi all, I have a complex gradle script that wraps up a load of functionality around building and deploying a number of netbeans projects to a number of environments. The script works very well, but in essence it is all configured through half a dozen maps holding project and environment information. I want to abstract the tasks away into another file, so that I can simply define my maps in a simple build file, and import the tasks from the other file. In this way, I can use the same core tasks for a number of projects and configure those projects with a simple set of maps. Can anyone tell me how I can import one gradle file into another, in a similar manner to Ant's task? I've trawled Gradle's docs to no avail so far. Additional Info After Tom's response below, I thought I'd try and clarify exactly what I mean. Basically I have a gradle script which runs a number of subprojects. However, the subprojects are all Netbeans projects, and come with their own ant build scripts, so I have tasks in gradle to call each of these. My problem is that I have some configuration at the top of the file, such as: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] I then generate tasks such as: projects.each({ task "checkout_$it.shortname" << { // Code to for example check module out from cvs using config from 'it'. } }) I have many of these sort of task generation snippets, and all of them are generic - they entirely depend on the config in the projects list. So what I want is a way to put this in a separate script and import it in the following sort of way: projects = [ [name:"MySubproject1", shortname: "sub1", env:"mainEnv", cvs_module="mod1"], [name:"MySubproject2", shortname: "sub2", env:"altEnv", cvs_module="mod2"] ] import("tasks.gradle") // This will import and run the script so that all tasks are generated for the projects given above. So in this example, tasks.gradle will have all the generic task generation code in, and will get run for the projects defined in the main build.gradle file. In this way, tasks.gradle is a file that can be used by all large projects that consist of a number of sub-projects with Netbeans ant build files.

  Read the article

• mediaelement.js control sizes are wrong when clip nested in a hidden element

  - by Martin Francis

  It's a nasty one this. In an audio control placed within a container element whose display property is initially set to none, the audio clip does NOT correctly size the progress bar when it is initialised. This is clear when the container's display property is changed from 'none' to '' (which is equivalent to 'static'). But who would ever do that? I make extensive use of 'tabbed' display arrangements on community sites like this one: http://www.churchesInBracebridge.ca Owing to the page arrangement, the audio controls which you see under 'sermons' (which at the time of writing still using Flash rather than John's excellent library here) are initially rendered in a div that is hidden. Simplified Test case Rather than have anyone have to wade through all of that, here's a much simplified test case: http://jsfiddle.net/sJL6T/36 Here's the full page source for those who'd prefer to work with it that way. <!DOCTYPE html> <html> <head> <meta http-equiv="content-type" content="text/html; charset=UTF-8"/> <title>MediaElementPlayer.js</title> <script type="text/javascript" src="//ajax.googleapis.com/ajax/libs/jquery/1.9.1/jquery.min.js"></script> <script src="http://mediaelementjs.com/js/mejs-2.13.1/mediaelement-and-player.js"></script> <link rel="stylesheet" href="http://mediaelementjs.com/js/mejs-2.13.1/mediaelementplayer.css" /> <script type="text/javascript"> function toggle(id){ document.getElementById(id).style.display= (document.getElementById(id).style.display=='none' ? '' : 'none'); } </script> </head> <body> <h1>MediaElementPlayer.js</h1> <h2 onclick="return toggle('test1')">Initially Hidden (Click to toggle)</h2> <div id='test1' style='display:none'> <audio controls="controls"> <source src="http://mediaelementjs.com/media/AirReview-Landmarks-02-ChasingCorporate.mp3" type="audio/mp3" /> </audio> </div> <h2 onclick="return toggle('test2')">Initially Shown (Click to toggle)</h2> <div id='test2' style=''> <audio controls="controls"> <source src="http://mediaelementjs.com/media/AirReview-Landmarks-02-ChasingCorporate.mp3" type="audio/mp3" /> </audio> </div> <script> $('audio').mediaelementplayer(); </script> </body> </html> Possible Workarounds Now I know that Google maps has the same quirk and there are two possible ways I've used to deal with that: Use absolute positioning in a displayed div to place the element 10,000px to the left then bring it onto the stage when we want to see it Have the map pane displayed when loading then hide it as soon as it's loaded (ugly I know, but it usually works) However either approach would be a pain to do, as I have a lot of legacy code using the simpler div hiding method. I know that JQuery can get the dimensions of an element event if it is hidden - someone thoughtfully fiddled that and it does work: http://jsfiddle.net/sJL6T/9 Perhaps it may be possible to modify the actual library to find correct dimensions, even if the container itself is hidden? That would be wonderful, if it can be done! Initial experiments on mediaelement-and-player.js code I found that when I provided a fixed value in the setControlsSize function for railWidth, I got consistent results with both controls in the test case above (and obviously I'm working with my own copy of the library to do that, not the one stored at mediaelementjs.com): // outer area rail.width(railWidth); Change to this: // outer area railWidth=216; rail.width(railWidth); Many thanks in anticipation! Martin Francis <<

  Read the article

• ASP.NET 2.0 files work in one folder, but NOT in another

  - by Steve

  I am about to leap of a building. I have created an app for a client and all the files are in a folder on their D drive. Now it is time to go production, so I copied all my files and folders to their excisting classic asp folder on the same drive. BUT NOTHING WORKS. The only difference I can see is that DEV does not require HTTPS like the production site. I also made sure all the permissions are the same on both folder. I made sure that the GAC has read rights using the aspnet_regiis tool. I am at the end of my debug knowlegde, could someone please help me out. Here are the error messages I get from the application event log. Failed to initialize the AppDomain:/LM/W3SVC/3/Root Exception: System.Configuration.ConfigurationErrorsException Message: Exception of type 'System.Configuration.ConfigurationErrorsException' was thrown. StackTrace: at System.Web.Configuration.ErrorRuntimeConfig.ErrorConfigRecord.System.Configuration.Internal.IInternalConfigRecord.GetLkgSection(String configKey) at System.Web.Configuration.RuntimeConfigLKG.GetSectionObject(String sectionName) at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index) at System.Web.Configuration.RuntimeConfig.get_HostingEnvironment() at System.Web.Hosting.HostingEnvironment.StartMonitoringForIdleTimeout() at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironment(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters) at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironmentAndReportErrors(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ------------------------ Failed to execute the request because the ASP.NET process identity does not have read permissions to the global assembly cache. Error: 0x80131902 For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. ------------------------- aspnet_wp.exe (PID: 4568) stopped unexpectedly. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Here is the web error message: Server Application Unavailable The web application you are attempting to access on this web server is currently unavailable. Please hit the "Refresh" button in your web browser to retry your request. Administrator Note: An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur. Thank you for your help, Steve

  Read the article

• Background changes by itself and procedure repeats many times until I release the mouse button

  - by Robert

  Dear community, I am a student, and I'm working on a little slots game (if the same random number comes up 3 timed, you win). I use Borland Pascal 7. I use graph to make this a bit more visual, but when I start the game my background turns from black to grey, and the other problem is that if I click the game start button, the game runs many times until I release the mouse button. How can I solve this? Here is my full program: program slots; uses mymouse,graph,crt; var gdriver,gmode,coin:integer; m:mouserec; a,b,c,coins:string; procedure gomb(x1,y1,x2,y2:integer;szoveg:string); var j,n:integer; begin setcolor(blue); rectangle(x1,y1,x2,y2); setfillstyle(1,blue); floodfill(x1+2,y1+2,blue); setcolor(0); outtextxy((x1+x2)div 2 -textwidth(szoveg) div 2 ,(y1+y2) div 2-textheight(szoveg) div 2,szoveg); end; procedure randomal(var a,b,c:string); begin randomize; STR(random(2)+1,a); STR(random(2)+1,b); STR(random(2)+1,c); end; procedure menu; begin; settextstyle(0,0,1); outtextxy(20,10,'Meno menu'); gomb(20,20,90,50,'Teglalap'); gomb(20,60,90,90,'Inditas'); gomb(20,100,90,130,'Harmadik'); gomb(20,140,90,170,'Negyedik'); end; procedure teglalap(x1,x2,y1,y2,tinta:integer); begin setcolor(tinta); rectangle(x1,x2,y1,y2); end; procedure jatek(var a,b,c:string;var coin:integer;coins:string); begin; clrscr; menu; randomal(a,b,c); if ((a=b) AND (b=c)) then coin:=coin+1 else coin:=coin-1; settextstyle(0,0,3); setbkcolor(black); outtextxy(200,20,a); outtextxy(240,20,b); outtextxy(280,20,c); STR(coin,coins); outtextxy(400,400,coins); end; procedure eger; begin; mouseinit; mouseon; menu; repeat getmouse(m); if (m.left) and (m.x20) ANd (m.x<90) and (m.y20) and (m.y<50) then teglalap(90,90,300,300,blue); if (m.left) and (m.x20) AND (m.x<90) and (m.y60) and (m.y<90) then jatek(a,b,c,coin,coins); until ((m.left) and (m.x20) ANd (m.x<140) and (m.y140) and (m.y<170)); end; begin coin:=50; gdriver:=detect; initgraph(gdriver, gmode, ''); eger; end. Thank you very much, Robert

  Read the article

• Postergres could not connect to server

  - by Gary Lai

  After I did brew update and brew upgrade, my postgres got some problem. I tried to uninstall postgres and install again, but it didn't work as well. This is the error message.(I also got this error message when I try to do rake db:migrate) $ psql psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"? How can I solve it? Mac version: Mountain lion. homebrew version: 0.9.3 postgres version: psql (PostgreSQL) 9.2.1 And this is what I did. 12:30 ~/D/works$ brew uninstall postgresql Uninstalling /usr/local/Cellar/postgresql/9.2.1... 12:31 ~/D/works$ brew uninstall postgresql Uninstalling /usr/local/Cellar/postgresql/9.1.4... 12:31 ~/D/works$ psql --version bash: /usr/local/bin/psql: No such file or directory 12:33 ~/D/works$ brew install postgresql ==> Downloading http://ftp.postgresql.org/pub/source/v9.2.1/postgresql-9.2.1.tar.bz2 Already downloaded: /Library/Caches/Homebrew/postgresql-9.2.1.tar.bz2 ...... ...... ==> Summary /usr/local/Cellar/postgresql/9.2.1: 2814 files, 38M, built in 2.7 minutes 12:37 ~/D/works$ initdb /usr/local/var/postgres -E utf8 The files belonging to this database system will be owned by user "laigary". This user must also own the server process. The database cluster will be initialized with locale "en_US.UTF-8". The default text search configuration will be set to "english". initdb: directory "/usr/local/var/postgres" exists but is not empty If you want to create a new database system, either remove or empty the directory "/usr/local/var/postgres" or run initdb with an argument other than "/usr/local/var/postgres". 12:39 ~/D/works$ mkdir -p ~/Library/LaunchAgents 12:39 ~/D/works$ cp /usr/local/Cellar/postgresql/9.2.1/homebrew.mxcl.postgresql.plist ~/Library/LaunchAgents/ 12:39 ~/D/works$ launchctl load -w ~/Library/LaunchAgents/homebrew.mxcl.postgresql.plist homebrew.mxcl.postgresql: Already loaded 12:39 ~/D/works$ pg_ctl -D /usr/local/var/postgres -l /usr/local/var/postgres/server.log start server starting 12:39 ~/D/works$ env ARCHFLAGS="-arch x86_64" gem install pg Building native extensions. This could take a while... Successfully installed pg-0.14.1 1 gem installed 12:42 ~/D/works$ psql --version psql (PostgreSQL) 9.2.1 12:42 ~/D/works$ psql psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"?

  Read the article

• while creating archetype getting following error

  - by munna

  D:\Training\workspace\vppsourcemvn archetype:generate -B -DarchetypeGroupId=org .appfuse.archetypes -DarchetypeArtifactId=appfuse-modular-struts-archetype -Darc hetypeVersion=2.1.0-M1 -DgroupId=com.vmware -DartifactId=vpp [INFO] Scanning for projects... [INFO] Searching repository for plugin with prefix: 'archetype'. [INFO] ------------------------------------------------------------------------ [INFO] Building Maven Default Project [INFO] task-segment: [archetype:generate] (aggregator-style) [INFO] ------------------------------------------------------------------------ [INFO] Preparing archetype:generate [INFO] No goals needed for project - skipping [INFO] [archetype:generate {execution: default-cli}] [INFO] Generating project in Batch mode [WARNING] Error reading archetype catalog http://repo1.maven.org/maven2 org.apache.maven.wagon.TransferFailedException: Error transferring file: Connect ion timed out: connect at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:143) at org.apache.maven.wagon.StreamWagon.getInputStream(StreamWagon.java:11 6) at org.apache.maven.wagon.StreamWagon.getIfNewer(StreamWagon.java:88) at org.apache.maven.wagon.StreamWagon.get(StreamWagon.java:61) at org.apache.maven.archetype.source.RemoteCatalogArchetypeDataSource.ge tArchetypeCatalog(RemoteCatalogArchetypeDataSource.java:97) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:195) at org.apache.maven.archetype.DefaultArchetypeManager.getRemoteCatalog(D efaultArchetypeManager.java:184) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.getArchetypesB yCatalog(DefaultArchetypeSelector.java:278) at org.apache.maven.archetype.ui.DefaultArchetypeSelector.selectArchetyp e(DefaultArchetypeSelector.java:69) at org.apache.maven.archetype.mojos.CreateProjectFromArchetypeMojo.execu te(CreateProjectFromArchetypeMojo.java:186) at org.apache.maven.plugin.DefaultPluginManager.executeMojo(DefaultPlugi nManager.java:490) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoals(Defa ultLifecycleExecutor.java:694) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeStandalone Goal(DefaultLifecycleExecutor.java:569) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoal(Defau ltLifecycleExecutor.java:539) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeGoalAndHan dleFailures(DefaultLifecycleExecutor.java:387) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.executeTaskSegmen ts(DefaultLifecycleExecutor.java:284) at org.apache.maven.lifecycle.DefaultLifecycleExecutor.execute(DefaultLi fecycleExecutor.java:180) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:328) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:6 0) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: java.net.ConnectException: Connection timed out: connect at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) at java.net.Socket.connect(Socket.java:529) at java.net.Socket.connect(Socket.java:478) at sun.net.NetworkClient.doConnect(NetworkClient.java:163) at sun.net.www.http.HttpClient.openServer(HttpClient.java:394) at sun.net.www.http.HttpClient.openServer(HttpClient.java:529) at sun.net.www.http.HttpClient.(HttpClient.java:233) at sun.net.www.http.HttpClient.New(HttpClient.java:306) at sun.net.www.http.HttpClient.New(HttpClient.java:323) at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLC onnection.java:860) at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConne ction.java:801) at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection .java:726) at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLCon nection.java:1049) at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:373 ) at org.apache.maven.wagon.providers.http.LightweightHttpWagon.fillInputD ata(LightweightHttpWagon.java:115) ... 28 more [WARNING] No archetype found in Remote catalog. Defaulting to internal Catalog [INFO] ------------------------------------------------------------------------ [ERROR] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 46 seconds [INFO] Finished at: Wed Jun 09 16:11:07 IST 2010 [INFO] Final Memory: 11M/28M [INFO] ------------------------------------------------------------------------

  Read the article

• How to detect Links with out anchor element in a plain text

  - by dhee

  If user enters his text in the text box and saves it and again what's to add some more text he can edit that text and save it if required. Firstly if user enters that text with some links I, detected them and converted any hyperlinks to linkify in new tab. Secondly if user wants to add some more text and links he clicks on edit and add them and save it at this time I must ignore the links that already hyperlinked with anchor button Please help and advice For example: what = "<span>In the task system, is there a way to automatically have any site / page URL or image URL be hyperlinked in a new window?</span><br><br><span>So If I type or copy http://www.stackoverflow.com/&nbsp; for example anywhere in the description, in any of the internal messages or messages to clients, it automatically is a hyperlink in a new window.</span><br><a href="http://www.stackoverflow.com/">http://www.stackoverflow.com/</a><br> <br><span>Or if I input an image URL anywhere in support description, internal messages or messages to cleints, it automatically is a hyperlink in a new window:</span><br> <span>https://static.doubleclick.net/viewad/4327673/1-728x90.jpg</span><br><br><a href="https://static.doubleclick.net/viewad/4327673/1-728x90.jpg">https://static.doubleclick.net/viewad/4327673/1-728x90.jpg</a><br><br><br><span>This would save us a lot time in task building, reviewing and creating messages.</span> Test URL's http://www.stackoverflow.com/ http://stackoverflow.com/ https://stackoverflow.com/ www.stackoverflow.com //stackoverflow.com/ <a href='http://stackoverflow.com/'>http://stackoverflow.com/</a>"; I've tried this code function Linkify(what) { str = what; out = ""; url = ""; i = 0; do { url = str.match(/((https?:\/\/)?([a-z\-]+\.)*[\-\w]+(\.[a-z]{2,4})+(\/[\w\_\-\?\=\&\.]*)*(?![a-z]))/i); if(url!=null) { // get href value href = url[0]; if(href.substr(0,7)!="http://") href = "http://"+href; // where the match occured where = str.indexOf(url[0]); // add it to the output out += str.substr(0,where); // link it out += '<a href="'+href+'" target="_blank">'+url[0]+'</a>'; // prepare str for next round str = str.substr((where+url[0].length)); } else { out += str; str = ""; } } while(str.length>0); return out; } Please help Thanks.

  Read the article

• Feedback on iterating over type-safe enums

  - by Sumant

  In response to the earlier SO question "Enumerate over an enum in C++", I came up with the following reusable solution that uses type-safe enum idiom. I'm just curious to see the community feedback on my solution. This solution makes use of a static array, which is populated using type-safe enum objects before first use. Iteration over enums is then simply reduced to iteration over the array. I'm aware of the fact that this solution won't work if the enumerators are not strictly increasing. template<typename def, typename inner = typename def::type> class safe_enum : public def { typedef typename def::type type; inner val; static safe_enum array[def::end - def::begin]; static bool init; static void initialize() { if(!init) // use double checked locking in case of multi-threading. { unsigned int size = def::end - def::begin; for(unsigned int i = 0, j = def::begin; i < size; ++i, ++j) array[i] = static_cast<typename def::type>(j); init = true; } } public: safe_enum(type v = def::begin) : val(v) {} inner underlying() const { return val; } static safe_enum * begin() { initialize(); return array; } static safe_enum * end() { initialize(); return array + (def::end - def::begin); } bool operator == (const safe_enum & s) const { return this->val == s.val; } bool operator != (const safe_enum & s) const { return this->val != s.val; } bool operator < (const safe_enum & s) const { return this->val < s.val; } bool operator <= (const safe_enum & s) const { return this->val <= s.val; } bool operator > (const safe_enum & s) const { return this->val > s.val; } bool operator >= (const safe_enum & s) const { return this->val >= s.val; } }; template <typename def, typename inner> safe_enum<def, inner> safe_enum<def, inner>::array[def::end - def::begin]; template <typename def, typename inner> bool safe_enum<def, inner>::init = false; struct color_def { enum type { begin, red = begin, green, blue, end }; }; typedef safe_enum<color_def> color; template <class Enum> void f(Enum e) { std::cout << static_cast<unsigned>(e.underlying()) << std::endl; } int main() { std::for_each(color::begin(), color::end(), &f<color>); color c = color::red; }

  Read the article

• Architecture for Qt SIGNAL with subclass-specific, templated argument type

  - by Barry Wark

  I am developing a scientific data acquisition application using Qt. Since I'm not a deep expert in Qt, I'd like some architecture advise from the community on the following problem: The application supports several hardware acquisition interfaces but I would like to provide an common API on top of those interfaces. Each interface has a sample data type and a units for its data. So I'm representing a vector of samples from each device as a std::vector of Boost.Units quantities (i.e. std::vector<boost::units::quantity<unit,sample_type> >). I'd like to use a multi-cast style architecture, where each data source broadcasts newly received data to 1 or more interested parties. Qt's Signal/Slot mechanism is an obvious fit for this style. So, I'd like each data source to emit a signal like typedef std::vector<boost::units::quantity<unit,sample_type> > SampleVector signals: void samplesAcquired(SampleVector sampleVector); for the unit and sample_type appropriate for that device. Since tempalted QObject subclasses aren't supported by the meta-object compiler, there doesn't seem to be a way to have a (tempalted) base class for all data sources which defines the samplesAcquired Signal. In other words, the following won't work: template<T,U> //sample type and units class DataSource : public QObject { Q_OBJECT ... public: typedef std::vector<boost::units::quantity<U,T> > SampleVector signals: void samplesAcquired(SampleVector sampleVector); }; The best option I've been able to come up with is a two-layered approach: template<T,U> //sample type and units class IAcquiredSamples { public: typedef std::vector<boost::units::quantity<U,T> > SampleVector virtual shared_ptr<SampleVector> acquiredData(TimeStamp ts, unsigned long nsamples); }; class DataSource : public QObject { ... signals: void samplesAcquired(TimeStamp ts, unsigned long nsamples); }; The samplesAcquired signal now gives a timestamp and number of samples for the acquisition and clients must use the IAcquiredSamples API to retrieve those samples. Obviously data sources must subclass both DataSource and IAcquiredSamples. The disadvantage of this approach appears to be a loss of simplicity in the API... it would be much nicer if clients could get the acquired samples in the Slot connected. Being able to use Qt's queued connections would also make threading issues easier instead of having to manage them in the acquiredData method within each subclass. One other possibility, is to use a QVariant argument. This necessarily puts the onus on subclass to register their particular sample vector type with Q_REGISTER_METATYPE/qRegisterMetaType. Not really a big deal. Clients of the base class however, will have no way of knowing what type the QVariant value type is, unless a tag struct is also passed with the signal. I consider this solution at least as convoluted as the one above, as it forces clients of the abstract base class API to deal with some of the gnarlier aspects of type system. So, is there a way to achieve the templated signal parameter? Is there a better architecture than the one I've proposed?

  Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >