Search Results

Search found 69890 results on 2796 pages for 'ip help'.

Page 545/2796 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

  • Understanding DHCP setting for DNS Server Options and Scope Options

    - by Saariko
    I have installed 2 DC's on my network (W2K8 R2) both serve as a replicate DC on my domain. On one of them (DC1) there is also a DHCP server running. On both I have a DNS server running. I am trying to understand the difference in the settings within the DHCP of Server Options and Scope Options. As I understand it: On the server options, I should put an external DNS for system (lets say 8.8.8.8 - google) And on the scope options, I should put both my internal dc1 and dc2 IP's as the server. - which are than distributed to my domain clients. Is that correct? Is there a better way? Do I need to add loopback address as well?

    Read the article

  • Keeping websites from knowing where I live

    - by D Connors
    This questions is related to issues and practicality, not security. I live in Brazil and, apparently, every single website I visit knows about it. Usually that's okay. But there are quite a few sites that don't make use of that information adequately. For instance: Bing keeps thinking that Brazilian pages are way more relevant to me than American ones (which they're not). google.com always redirects me to google.com.br Microsoft automatically sends me to horribly translated support pages in Portuguese (which would just be easier to read in English). These are just a few examples. Usually it's stuff I can live with (or work around), but some of them are just plain irritating. I have geolocation disabled in Firefox, so I guess they're either getting this information from my IP or from Windows itself (which I bought here). Is there a way to avoid this? Either tell them nothing or make them think I live somewhere else?

    Read the article

  • firehol (firewall) with bridge: how to filter

    - by Leon
    I have two interfaces: eth0 (public address) and lxcbr0 with 10.0.3.1. I have a LXC guest running with ip 10.0.3.10 This is my firehol config: version 5 trusted_ips=`/usr/local/bin/strip_comments /etc/firehol/trusted_ips` trusted_servers=`/usr/local/bin/strip_comments /etc/firehol/trusted_servers` blacklist full `/usr/local/bin/strip_comments /etc/firehol/blacklist` interface lxcbr0 virtual policy return server "dhcp dns" accept router virtual2internet inface lxcbr0 outface eth0 masquerade route all accept interface any world protection strong #Outgoing these protocols are allowed to everywhere client "smtp pop3 dns ntp mysql icmp" accept #These (incoming) services are available to everyone server "http https smtp ftp imap imaps pop3 pop3s passiveftp" accept #Outgoing, these protocols are only allowed to known servers client "http https webcache ftp ssh pyzor razor" accept dst "${trusted_servers}" On my host I can connect only to "trusted servers" on port 80. In my guest I can connect to port 80 on every host. I assumed that firehol would block that. Is there something I can add/change so that my guest(s) inherit the rules of the eth0 interface?

    Read the article

  • Creating a secure multicast tunnel with socat

    - by ams
    How we can create secure multicast tunnels ith socat? Assume that we have a list of IP address, CIDR network addresses that we want to create secure tunnel to them. I found this: socat STDIO UDP4-DATAGRAM:224.1.0.1:6666,range=192.168.10.0/24 but I want a secure tunnel and different adds with net addrs I want to create script that give the IPs and net addresses and creates a secure tunnel ./myscript IP1 NetAdd1 IP2 NetAdd2 .... How can I send these parameters to socat? Does socat multicast have any limits?

    Read the article

  • Can't enable Windows XP file sharing

    - by colemanm
    The "sharing and security" option in the right-click context menu on a folder is no longer there. The File and Print sharing option is "installed" and turned on in the TCP/IP properties, but the ability to share any folders has disappeared, along with all previously shared folders. Where should I check to see what the issue is here? EDIT From comments below: "Server" service is not starting, see comment below for more... Firewall is completely disabled, too. This is XP Pro, Simple File Sharing is turned on. We've discovered that the "Server" Windows service is not starting on bootup for some reason. When attempting manual start, we get "error 2001: specified driver is invalid."

    Read the article

  • Another installation is in progress

    - by Steven
    Why I try to install any program I see "Another installation is in progress. You must complete that installation before continuing this one." error. Googled the web and found that solution would be to delete HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress registry key and reboot. That didn't help me unfortunately. When I open "Services" mmc snapin it shows that "Windows Installer" service is "Started", but "Start/Stop/Pause/Restart" buttons are grayed (the interesting thing is that startup type = "Manual", so I don't really know how to explain that I already have 2 instances of msiexec.exe in memory and one instance is consuming 50Mb of memory. Looks like there's a serious issue with my installer service - is there any way to fix it (please do mind - I can't install anything!) Any help would be greatly appreciated.

    Read the article

  • Discover MAC address

    - by Kami
    I've to setup a bunch of server ! I need to discover their mac address with the following situation : MacBookPro >----------< Server I'm directly connected (not behind a router/switch) to the server. I've no clues about the ip address the server is using as default setup. I can't use a display connected to the server displaying its newtwork card config. How can I discover the MAC address of the server network card ? I'm looking for a command line tool. If something exists in MacPort it's also ok !

    Read the article

  • I would like to start multiple computers at once, What software do I use?

    - by Matt 'Trouble' Esse
    I have turned on Wake On Lan on all of the BIOSes in the PCs and I have a simple batch file that runs a free command wolcmd.exe Wake on Lan Command Line The syntax is as follows: wolcmd [mac address] [ip address] [subnet mask] [port number] The batch file looks a little like this.... wolcmd 009027a324fe 195.188.159.20 255.255.255.0 8900 wolcmd 009024a731da 212.86.64.31 255.255.255.0 8900 It's OK but It's not very user friendly (I need to set this up for other people to use and administer) Can you suggest a Windows (XP/Vixta/7) Alternative with a GUI? Free is cool, but a good paid for version is fine if you think it's worth it! Thanks in advance for your informed suggestions

    Read the article

  • The simplest Ubuntu mail server

    - by John G.
    After days of trying all sorts of tutorials I finally found a simple solution (not necessary the best) for a functional ubuntu mail server: sudo aptitude install postfix next type sudo dpkg-reconfigure postfix and configure like this: Internet Site yourdomain.com john (type your ubuntu user) yourdomain.com, localhost.localdomain, localhost No 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/192.168.0.1/24 (192.198.0.1 replace with your server ip address) 0 + all next install mail-stack-delivery sudo aptitude install mail-stack-delivery At this point you have a working mail server. Next, I configured SquirrelMail and start sending and receaving mail. This configuration worked with both Apache and Nginx.

    Read the article

  • scp through ssh gateway connection

    - by zidarsk8
    so my network layou is something like this (I don't have enough reputation to post images so here's the link) http://i.imgur.com/OaD4i.png now Alice has access to SSH gateway (just gateway from now on) with: ssh alice@external.ip and the authorized keys file on the gateway looks like this #/home/Alice/.ssh/authorized_keys command="ssh -t alice@web" ssh-rsa ABCD...E== alice@somehost so when Alice trys to connect to the Gateway with her private key, she actually gets connected to the Web server (the gateway pc can make a connection to the web server with a passwordless private key, so that stays transparent). The question 1) How can I set this up so that Alice will be able to scp things to web server too? 2) I know this makes a separete connection, but is there any way for this to work as a normal ssh so that even something like -R12345:localhost:22 would work?

    Read the article

  • Why are all Linux commands broken after installing Perl?

    - by user115079
    I installed perl using following command: curl -L http://xrl.us/installperlnix | bash after that i run following command to create soft link ln -sf /usr/local/bin/perl /usr/bin/perl now I'm trying to run commands like dir, mkdir, ll, rm, vi but nothing seems to be working for me. also when i try to login into my shell i get following msg at startup: Last login: Wed Apr 4 21:50:12 2012 from x.y.z.ip -bash: perl: command not found please help. Here is system detail: cat /proc/version Linux version 2.6.18-274.18.1.el5.028stab098.1 (root@rhel5-build-x64) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Sat Feb 11 15:30:41 MSK 2012 cat /etc/issue CentOS 5.7 32 bit Kernel \r on an \m Don't know if perl was already installed or not. and now i can't check.

    Read the article

  • VFS: file-max limit 1231582 reached

    - by Rick Koshi
    I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

    Read the article

  • sendmail is using return-path instead of from address

    - by magd1
    I have a customer that is complaining about emails marked as spam. I'm looking at the header. It shows the correct From: [email protected] However, it doesn't like the return-path. Return-Path: <[email protected]> Received-SPF: neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) client-ip=x.x.x.x; Authentication-Results: mx.google.com; spf=neutral (google.com: x.x.x.x is neither permitted nor denied by domain of [email protected]) [email protected] How do I configure sendmail to use the From address for the Return-Path?

    Read the article

  • Exchange enrypted messages with a single recipient

    - by Andy
    I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

    Read the article

  • Send all traffic over VPN connection not working Windows VPN host

    - by Adam Schiavone
    I am trying to get a mac (10.8) to connect to thru vpn to a server running Windows Server 2008 R2 pass all requests from the mac to the server. The VPN is setup and I can connect and access the server thru a web browser, but for all other sites, the DNS lookup fails. I have tried adding a DNS server to the VPN Host. ex. Lets say the the VPN server also hosts a website example.com. I connect to the VPN with my mac and point a browser to example.com and everything works fine. but when I point the browser to google.com it just sits there and will eventually come back with a DNS lookup failed message. HOWEVER: I tried running the command dig @myServersIpHere www.google.com. on the mac and it comes back with correct IP addresses. I really dont know what to do from here. How can I route all requests from my mac, thru my windows server via VPN?

    Read the article

  • Adsense-type services without the content check?

    - by Ryan Ahearn
    Are there any ad-placing services that don't mind that the page is nothing but a page of ads? Someone else with a .cn tld is pointing to my IP address. I currently have that site on its own name based virtual host that responds to every request with a 403, but I figure if I am paying for the incoming bandwidth, I might as well try to make some money off it. I don't want to actually create any content for this site, which prevents me from using adsense. My only requirements are that it is free for me to sign up and that they don't mind the lack of content.

    Read the article

  • Get LDAP Information For University Email. For Thunderbird

    - by Dhruvenkumar Shah
    I am a Student at Northeastern University. They use G-Apps for email ids, so whenever I need to email someone, using university Id which ends with husky.neu.edu. I have to go Gmails compose mail, They have some LDAP Setting by which I get all the email ids using AJAX in "To" as soon as I start typing. I want to configure same in Thunderbird, I contacted university but they are not able to help me. Is it possible that on my G-Apps Gmail Settings those LDAP Parameter needed for configuration are presents? Can anyone help me? I want to configure a directory reference in my email client thunderbird, I dont know the parameters to use, it is possible I can get it somehow?

    Read the article

  • How to register putty public key on windows server 2003?

    - by igarren
    So we were trying to transfer files from unix server to a windows server 2003. I currently don't have any visibility on the unix server since it is being handled by another team. So in order for the 2 servers to establish connection, they sent us a public key which they said that we need to register on our windows server 2003 machine. can anyone help me? i cant seem to find anything about registering this public key generated by putty on a windows server 2003. there's no directory to put the public key(like in linux authorized_keys). Any help will be appreciated. thanks in advance. EDIT: we're trying to transfer file via pscp if this info is needed.

    Read the article

  • Libre Office/Writer PDF export: white borders appear between lines even after setting borders to none

    - by Yttric
    My document prints ok (exactly as it appears on the screen in Libre Office), but when I export to PDF and view the PDF on screen there are white borders around each text or picture object. Here's a sample snapshot from PDF/Preview: http://imgur.com/TWip5 I've tried selecting a paragraph and changing the border property to None as described in Libre Office help (http://help.libreoffice.org/Common/Borders), setting the "Line arrangement Default" to "Set no borders". But borders set by the Format dialog don't correspond to the borders I see in PDF/Preview. In PDF/Preview the border appears on line boundaries. Borders set in Format appear around each picture, for example. What am I doing wrong?

    Read the article

  • using Linux vncviewer

    - by Darkoni
    Hi ! when i am connecting to VNC server using wine on linux $ wine vncviewer.exe i have to enter: VNC Server: 1.1.1.21 Proxy/Reapeter: 195.29.18.33:1234 and then, when i connect, on top there is txt: 1.1.1.21:5900 (195.29.18.33:1234) mine question is: how to connect using vncviewer ? what to put in VNC_VIA_CMD ? $ export xlocalPort=1234 $ export xremoteHost=1.1.1.21 $ export xremotePort=5900 $ export xgateway=195.29.18.33 $ export VNC_VIA_CMD="/usr/bin/ssh -f -L $xlocalPort:$xremoteHost:$xremotePort $xgateway sleep 20" $ vncviewer $xremoteHost -via $xgateway and i get error: unable connect to socket: Connection refused (111) i was trying to help myself with page http://www.tightvnc.com/vncviewer.1.php Please help, couse i need to use "native" linux vncviewer installed by $ yum install tigervnc tigervnc.i686 0:1.0.90-0.13.20100420svn4030.fc13 Thnx

    Read the article

  • performance block countries using iptables /netfilter

    - by markus
    It's easy to block IPs from country using iptables (e.g. like http://www.cyberciti.biz/faq/block-entier-country-using-iptables/). However I read that the performance can go down if the deny list get too large. An alternative is installing the iptables geoip patch or using ipset ( http://www.jsimmons.co.uk/2010/06/08/using-ipset-with-iptables-in-ubuntu-lts-1004-to-block-large-ip-ranges/) instead of iptables. Does anyone have experience with the various approaches and can say something about the performance differences ? Are there are other ways to block country IPs in linux which I did't mentioned above?

    Read the article

  • Access Other Computer via ADSL Modem and Router

    - by Sohail
    My network configuration is like this ISP - Modem - Router - Computer and the same goes for my friend. We want to share large files or to access each other's computer. The Passwords to login to the web page of each other modems are known. I mean, we can access each other Modem Web GUI easily ( because we know the WAN IP of each other modem ). The question is how do i access his or how do he access my computer? Is there any way to do so. Remote desktop connection is not working :( Please help

    Read the article

  • After logging out of SSH, screen sessions disappear on Arch Linux

    - by Ivan
    On Arch Linux (I'm on a single dedicated server, where my domain name points to only one IP), when I SSH into a user (say, for example, user mc), and then do screen -S test (or -dmS, the resulting issue is the same), run a command, and then detach from it, then exit out of my SSH session, and log back in, the screen session disappears. screen -ls returns No Sockets found in /run/screens/S-mc. The only way I can reattach to my sessions is if I never logged out of my SSH. How do I fix this? I do have read/write access in /run/screens/S-mc I detach from screen sessions with Ctrl-A,D disown -a && exit gives me the same problem shopt huponexit returns "huponexit off" There is no ~/.logout, and ~/.bash_logout is empty, with 3 lines of comments, telling me it's the ~/.bash_logout file ls -l /usr/bin | grep screen returns lrwxrwxrwx 1 root root 12 Oct 31 2012 screen -> screen-4.0.3 -rwsr-xr-x 1 root root 363672 Oct 31 2012 screen-4.0.3

    Read the article

  • Is an Intranet music streaming server legal?

    - by Jon Smock
    We are a large organization with thousands of users, and we're peaking on our Internet usage. Many of those users are streaming music while they work. We're wondering if providing a music streaming server internally would help on bandwidth. How legal is that? Here are two scenarios: 1) We purchase a body of music legally and stream it internally (I assume this is illegal) 2) We pull music feeds from free, legal, online sources and "rebroadcast" internally (I assume this is legal) We want to save bandwidth and help our users, but we want to do it in an ethical and legal way.

    Read the article

  • Sending an Email from 2 Mail Servers

    - by Ted Smith
    We are currently attempting to move away from using a "local" mail(exchange) server to an cloud based offering for all our automated emails. The problem is that we send and receive thousands for emails a day and its uptime is quite critical so the business do not want to put all their eggs in one basket, so if we would like to use a cloud based offering(mailgun) they would like a backup if this goes down. So my question is: Would it be possible to set multpile A, TXT and CNAME records to multiple IP address so if one mail server goes down we can automatically start sending emails from the fallover(without them being blocked doing a reverse DNS lookup)? I know we will still need to adjust the MX record for incoming emails but that is acceptable to not receive emails for a short(1-2 hours) of time. Does this make sense?

    Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >