Search Results

Search found 25706 results on 1029 pages for 'issue tracking'.

Page 545/1029 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

  • Large temp files created in Windows Server 2003 temp folder

    - by BlueGene
    I'm managing a Windows Server 2003 with around 30 GB space in primary partition. A couple of times the server has crashed with error message saying that the C: drive is full. After searching folders to free up space, I found that lot of temp files being created in C:\WINNT\Temp and some of them of enormous size with more than 2GB. The temp files have common name, Efs###.tmp. Since we encrypt files frequently using Windows's EFS, I initially suspected Windows encryption. But after reading the documentation, I found that Efs###.tmp are in fact created by EFS but they are created only under the folder which you're currently encrypting, not in Temp folder. This looks very strange since Efs##.tmp files shouldn't be created under C:\WINNT\Temp unless someone tried to encrypt that Temp folder itself. The server has Tivoli Backup client. Could that be messing with windows Encryption? Can anyone shed some light on what could be causing the issue?

    Read the article

  • solve a partition misalignment?

    - by learner
    I have a new Dell XPS laptop which had Windows 7 installed in it. It also had a default extra partition for "Dell Utility". I installed Ubuntu in it on an Extended Partition along with windows and specified the logical partitions myself (for /,/home and swap). Now when I open Disk Utility , it shows this "Partition misaligned by 512 bytes" error for the Dell Utility partition and "Partition misaligned by 1024 bytes" for the entire Extended partition where Ubuntu is installed. Deleting the extended partition and re-installing Ubuntu may solve the problem of misalignment in the extended partition. But how about the Dell Utility partition? If I re-install Windows 7 Dell Utility wouldn't be a part of the re-install. So that may not solve it either. How do I fix this? Note: The extended partition I made contains an NTFS logical partition for holding data accessible by both OSes(basically a personal data partition). EDIT: I deleted all my Ubuntu partitions and re-installed Ubuntu like before,this time making them partitions with GParted via LiveCD. Now the only problem is that there is a misalignment in the Dell Utility partition. The other misalignment got fixed. Now how do I get rid of that issue?

    Read the article

  • Need to re-build an application - how?

    - by Tom
    For our main system, we have a small monitor application that sits outside our network and periodically tries to log in to verify the system still works. We have a problem with the monitor though in that the communications component set (Asta 3 inside Delphi applications) doesn't always connect through. Overall, I'd say it's about 95% reliable, but that other 5% kills the monitor since it will try to log in and hang on the connection attempt (no timeout in the component). This really isn't an issue on the client side of the system since the clients don't disconnect and reconnect repeatedly on the same application instance, but I need a way to make sure the monitor stays up and continues working even when the component fails on a run. I have a few ideas as to which way to have the program run, the main idea being to put the communications inside a threaded data module so that if one thread crashes then another thread can test later and the program keep going. Does this sound like a valid way to go? Any other ideas how to ensure a reliable monitoring application with a less than 100% reliable component? Thanks. P.S. Not sure these tags are the most appropriate. Tried including "system-reliability" as one, but not high enough rep to create.

    Read the article

  • Sporadic disk clicking sound

    - by Abdó
    Hi, I'm having some unusual and sporadic hard disk clicking issues. Here is a cronological description of the facts. I'm using an ASUS P6T-SE with Intel Core i7, 6Gb RAM 600W Power supply and ATI4670 graphics, running Ubuntu 10.10. About one month ago my hard disk (SATA II Seagate Barracuda 1Tb 7200 rpm) started making a clicking sound: a sort of loud tic-tac, every second or so, when involved in disk activity. The system was clearly slower than before at disk access, but it was functional and I could not find any signal of trouble on the linux logs. I disconnected the disk and tried an older SATA drive I had around: no problem with it. Then I reconnected the Seagate disk, and the problem was mysteriously gone. Ubuntu booted normally, usual speed, no clicking. A couple of weeks later, the problem reappeared. I tried disconnecting reconnecting (as it somehow solved the problem before) without luck. So, despite it was a rather new drive, I assumed it was a hardware issue, made backups and bought a new drive. The new drive is a SATA II Seagate Barracuda 1.5 Tb 7200 rpm. I installed both drives at the same time, with the intention of transferring my files from on to the other. To my surprise, when I booted the computer with both drives, both started making the clicking sound !! Even worse, I removed the old drive, leaving the unformated new drive connected, and booted from a LiveCD. It kept clicking ! Puzzled by this, I tried both drives on my laptop with a SATA to USB cable. At the moment I connected any of them, they made one or two unusual clicks and immediately stopped doing that and worked normally. The old drive I thought almost dead, was working like a charm as if nothing happened. Then I thought: "ok, it must be the motherboard. Let's try again". So, I reconnected the old drive to the ASUS P6T motherboard (the same cables and SATA port as before), and it worked as if nothing happened ! The problem was gone again. The new 1.5 Tb drive was also working ok: No clicking nor slowdown. So I left the old 1Tb disk connected and kept using the computer daily during 3 weeks, until today it happened again. Now I don't really know what to do or check. I'm not even sure if it is a hardware issue any more ! This is rather annoying as it seems it happens with a period of 2 or 3 weeks and I have no means of forcing it to happen. Does anyone have a clue of what can causes this behaviour or have any suggestions of things I should check when it happens again ? What I did today is checking some SMART parameters Error log: smartctl -l error /dev/sda. No errors Short selftest: smartctl -t short /dev/sda. No errors Disk Health check: smartctl -H /dev/sda. passed And here are the vendor specific parameters (smartctl -A /dev/sda) Which I'm not quite sure how to interpret. === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 235962588 3 Spin_Up_Time 0x0003 095 095 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 187 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 16348045 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3590 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 94 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 4295164029 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 070 057 045 Old_age Always - 30 (Lifetime Min/Max 19/31) 194 Temperature_Celsius 0x0022 030 043 000 Old_age Always - 30 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 037 026 000 Old_age Always - 235962588 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 73950746906346 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1832967731 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3294986902 Any clue to this mystery will be really welcome. Thank you very much !!

    Read the article

  • CodePlex Daily Summary for Saturday, March 24, 2012

    CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

    Read the article

  • Another Twig Improvements

    - by Ondrej Brejla
    Hi all! We are here again to intorduce you some of our new NetBeans 7.3 features. Today we'll show you some another Twig improvements. So let's start! Code Templates First feature is about Code Templates. We added some basic templates to improve your Editor experience. You will be really fast with it! If someone don't know what Code Templates are, they are piece of code (snippet) which is inserted into editor after typing its abbreviation and pressing Tab key (or another one which you define in Tools -> Options -> Editor -> Code Templates -> Expand Template on) to epxand it. All default Twig Code Templates can be found in Tools -> Options -> Editor -> Code Templates -> Twig Markup. You can add your custom templates there as well. Note: Twig Markup code templates have to be expanded inside Twig delimiters (i.e. { and }). If you try to expand them outside of delimiters, it will not work, because then you are in HTML context. If you want to add a template which will contain Twig delimiter too, you have to add it directly into Tools -> Options -> Editor -> Code Templates -> HTML/XHTML. Don't add them into Twig File, it will not work. Interpolation Coloring The second, minor, feature is, that we know how to colorize Twig Interpolation. It's a small feature, but usefull :-) And that's all for today and as usual, please test it and if you find something strange, don't hesitate to file a new issue (product php, component Twig). Thanks a lot!

    Read the article

  • OS X can't resolve localhost suddenly

    - by Conor
    Last week I fired up a website that I'm currently developing locally only to find out that it wasn't working as it was the night before, (or at all). After an inital stage of panic and 'what did I do' moments... I deduced the problem down to the fact that my OS X now wont resolve localhost properly, so connections to my SQL database were failing. I can still ping localhost in the terminal, but in order to get my websites up and running again, I had to change all the localhost entries to 127.0.0.1 This isn't a huge problem as everything is up and running again, but I would like to try to get to the bottom of it. I have a sneaking suspicion that an apple software update caused this issue, as I don't recall doing anything else that would have had any effect. Other than my hosts file (which looks normal), what else could be causing this? Running OSX 10.6.4

    Read the article

  • Free space in tmpfs partition not adding up

    - by Dean Herbert
    I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

    Read the article

  • What data should be cached in a multiplayer server, relative to AI and players?

    - by DevilWithin
    In a virtual place, fully network driven, with an arbitrary number of players and an arbitrary number of enemies, what data should be cached in the server memory, in order to optimize smooth AI simulation? Trying to explain, lets say player A sees player B to E, and enemy A to G. Each of those players, see player A, but not necessarily each other. Same applies to enemies. Think of this question from a topdown perspective please. In many cases, for example, when a player shoots his gun, the server handles the sound as a radial "signal" that every other entity within reach "hear" and react upon. Doing these searches all the time for a whole area, containing possibly a lot of unrelated players and enemies, seems to be an issue, when the budget for each AI agent is so small. Should every entity cache whatever enters and exits from its radius of awareness? Is there a great way to trace the entities close by without flooding the memory with such caches? What about other AI related problems that may arise, after assuming the previous one works well? We're talking about environments with possibly hundreds of enemies, a swarm.

    Read the article

  • Confused about implementing Single Responsibility Principle

    - by HichemSeeSharp
    Please bear with me if the question looks not well structured. To put you in the context of my issue: I am building an application that invoices vehicles stay duration in a parking. In addition to the stay service there are some other services. Each service has its own calculation logic. Here is an illustration (please correct me if the design is wrong): public abstract class Service { public int Id { get; set; } public bool IsActivated { get; set; } public string Name { get; set } public decimal Price { get; set; } } public class VehicleService : Service { //MTM : many to many public virtual ICollection<MTMVehicleService> Vehicles { get; set; } } public class StayService : VehicleService { } public class Vehicle { public int Id { get; set; } public string ChassisNumber { get; set; } public DateTime? EntryDate { get; set; } public DateTime? DeliveryDate { get; set; } //... public virtual ICollection<MTMVehicleService> Services{ get; set; } } Now, I am focusing on the stay service as an example: I would like to know at invoicing time which class(es) would be responsible for generating the invoice item for the service and for each vehicle? This should calculate the duration cost knowing that the duration could be invoiced partially so the like is as follows: not yet invoiced stay days * stay price per day. At this moment I have InvoiceItemsGenerator do everything but I am aware that there is a better design.

    Read the article

  • Coldfusion server VERY slow page loads

    - by Kevin
    I inherited a windows server 2003 coldfusion 7 server a few weeks ago. Today a network cable was unplugged by accident from the server. On plugging it back in, pages were NOT loading at all. Rather, we were receiving a generic coldfusion error page. After restarting IIS several times and coldfusion even more than that, we finally got pages to start loading. However, the loading is extremely slow (30+ seconds) on pages that used to load instantly. Loading through the local network (IE localhost/cfide/administrator) does nothing to help the load speed. I am not familiar with IIS or Coldfusion (We're in the process of migrating this to Linux/PHP), so this is all new territory to me. I'm hoping someone may have experienced this issue in the past and can help me solve it. I'm happy to provide any additional information that might be necessary....I'm just not sure what information you might need in order to help. Thanks for your time.

    Read the article

  • One site being on a subdirectory of another. Does google count this against you?

    - by Mick
    I have created two similar websites (relating to monetary systems). So far, one appears to be loved by Google and the other hated. I'm struggling to work out why. This is a mystery to me because both sites were created by me with the same design philosophy, both in pure html. Both are packed to the rafters with references to, and information about, their respective subjects. One issue I'm worried may be the cause is to do with the location of the sites. I got a web hosting package from hostmonster.com for the successful one, but less liked one is just an "add-on" which sits on a subdirectory of the successful one. I wonder if Google somehow detects this and treats it as a less significant website? EDIT: Just to clarify, even though one site is an add-on that sits on a subdirectory of the other, the URL is arranged to look like it is a root. I.e. the unpopular site can be accessed directly with a simple www.myunpopularsite.com name, without specifying any subdirectory. EDIT: Just in case its important... say the popular site is called pop.com and the unpopular one unpop.com. In the webspace I've purchased, there is a directory called public_html. This is where I put the index.htm and all the other files of my popular site. When I purchased the add-on unpop.com. I made a subdirectory of public_html called unpop. It is within this "public_html\unpop\" that I place the index.htm and all the other files of my unpopular site. Typing www.unpop.com into the address bar of a browser links directly to the contents of "public_html\unpop\" and the user is not aware that this site is sitting on a subdirectory of another site. BUT if you type "www.pop.com/unpop" into the address bar of a browser you DO see the unpopular site.

    Read the article

  • AMD FX 8350 potentially overheating

    - by rhughes
    I am worried that my CPU is overheating when running at maximum capacity. I have not overclocked the machine. The machine often powers down after a couple of minutes of max CPU usage. I get the following events in the Event Log after the crash: Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/10/2013 12:05:40 Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: home-pc Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. What can I do to confirm this or further narrow down this issue? Due to the sudden nature of the crash, no MEMORY.DMP is created I believe. I am happy to post any extra information that is needed.

    Read the article

  • Website Ethics / legal issues, image copyrights

    - by RailsN00b
    Ignoring the technical implementation of a website for a second, assume a website that is similar to twitter but with pictures. A user say something and puts a picture of whatever they said. As the nature of the internet, the images will most likely not be his/hers image. There are 2 options that I see for dealing with this: 1. The user will post a URL of the picture and the website will pull the picture from that URL everytime someone enters that page 2. The website will save the image in its own database of images and display the image to the visitors 'locally' The problem with option #1, while it saved storage, I see an issue with 'stealing' other websites bandwidth and if my website has many many visitors it could cost the image-hosting websites a lot and possible even crash it if the server can't handle the load. The problem with opion #2, while it saves the load to other websites, it practically takes pictures that could have copyright on them. Which option is better to implement in terms of legal issues and ethics? When do I need to contact another website to request permission to use the images from that site? Does anyone really care about that anymore. Where can I read about this?

    Read the article

  • Need advice to choose correct wi-fi drivers for Dell Vostro 3560

    - by overdriven
    I'm having problems with my Dell notebook's Wi-Fi, it can't see some of the available access points, despite they are close and I used to be connected to them yesterday. Other notebooks and my phone can see them. I believe it's a driver issue, since after installing system I haven't downloaded any network drivers. I went to Dell's website to search for them but I have no idea which should I choose. For my Dell Vostro 3560 and system Windows 8.1 64bit these are available: Intel Smart Connect Technology Application APP_iSCT_W8.1_A00_Setup-TJW84_ZPE.exe (23 MB) Vostro-3560_Network_Application_TJW84_WN_4.2.40.2418_A00.EXE (29 MB) Dell Wireless 1704 WLAN 802.11b/g/n (2.4GHz), Bluetooth v4.0+HS Driver DW1704_W8.1_A00_Setup-K1HGN_ZPE.exe (239 MB) Network_Driver_K1HGN_WN_6.30.223.143_A00.EXE (247 MB) Dell Wireless1703 802.11 b/g/n, BT4.0 + HS Driver Dell Wireless1901 802.11a/b/g/n (2.4GHz and 5GHz), Bluetooth v4.0+HS Driver DW1703_DW1901_Win8.1_A00_Setup-7FPWR_ZPE.exe (265 MB) Network_Driver_7FPWR_WN_10.0.0.263_A00.EXE (272 MB) Realtek RTL8105E/RTL8111E Ethernet Controller Driver LOM_Realtek_W8.1_A00_Setup-0XCVW_ZPE.exe (6 MB) Network_Driver_0XCVW_WN_8.018.0621.2013_A00.EXE (12 MB) Intel® Centrino® Wireless-N 2230 Bluetooth Driver BT_Intel_W8.14_A00_Setup-XR83W_ZPE.exe (31 MB) Network_Application_XR83W_WN_3.1.1307.0362_A00.EXE (37 MB)

    Read the article

  • Complete Public Folder Migration from Exchange 2007 to Exchange 2010

    - by Michael Todd
    We were in the process of migrating from Exchange 2007 to Exchange 2010 and hit a brick wall when trying to migrate Public Folders. After resolving issues with connectivity (and another issue with an old Exchange 2003 server being listed in AD that was causing the replication to fail) it finally appeared that messages were migrating from one server to another. However, we appear to have jumped the gun and ran MoveAllReplicas before the process was complete. We are now stuck with about 210MB of public folders on the new server from a 7GB public folder store on the old server. The messages appear to be available on the old server since running get-publicfolderstatistics shows that there are messages available. We have waited several days for the move to continue but we are stuck at 210MB. Is there something we can do to complete the replication so that all of the messages move from the old server to the new server?

    Read the article

  • Google suddenly only indexes https and not http

    - by spender
    So all of a sudden, searches for our site "radiotuna" give out the result as an HTTPS link. https://www.google.com/?q=radiotuna#hl=en&safe=off&output=search&sclient=psy-ab&q=radiotuna&oq=radiotuna&gs_l=hp.12...0.0.0.3499.0.0.0.0.0.0.0.0..0.0.les%3B..0.0...1c.LnOvBvgDOBk&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=177c7ff705652ec3&biw=1366&bih=602 We only use https for the download of two specific files (these urls are resources used for autoupdate functionality of an app we distribute). All other parts of the site should be served over http. We wouldn't like to see any other traffic over https, nor any of our site links to appear in search engines as https. I'd like to address this issue. It seems that the following solutions are available: hand out an https specific robots.txt as such: User-agent: * Disallow: / and/or at app-level, 301 permanent redirect all requests (except the two above) to HTTP if they come in as HTTPS. My concern with the robots method is that, say (for some reason) google decided not to index http pages, disallowing https pages might mean that google has nothing left to index with disastrous consequences for our ranking. This means I'm inclined to go with a 301 redirect. Any thoughts?

    Read the article

  • Windows 7, Drivers, Cloning and Sysprep

    - by Frank Thornton
    I have Windows 7 working on one machine but when I move it off to the new machine it crashes. If this is a driver issue do I need to download the drivers and install them first? Or do I install Windows 7 on the new machine first then copy the drivers folder over to the other disk so it will boot up correctly? EDIT: I was trying this as well: http://www.todo-backup.com/support/tutorial/redeploy-system-to-dissimilar-hardware.htm EDIT: I tried sysprep but on bootup I see the Windows logo then the system crashes. I can stick the drive back in the old hardware and it runs fine.

    Read the article

  • Logarithmic spacing of FFT subbands

    - by Mykel Stone
    I'm trying to do the examples within the GameDev.net Beat Detection article ( http://archive.gamedev.net/archive/reference/programming/features/beatdetection/index.html ) I have no issue with performing a FFT and getting the frequency data and doing most of the article. I'm running into trouble though in the section 2.B, Enhancements and beat decision factors. in this section the author gives 3 equations numbered R10-R12 to be used to determine how many bins go into each subband: R10 - Linear increase of the width of the subband with its index R11 - We can choose for example the width of the first subband R12 - The sum of all the widths must not exceed 1024 He says the following in the article: "Once you have equations (R11) and (R12) it is fairly easy to extract 'a' and 'b', and thus to find the law of the 'wi'. This calculus of 'a' and 'b' must be made manually and 'a' and 'b' defined as constants in the source; indeed they do not vary during the song." However, I cannot seem to understand how these values are calculated...I'm probably missing something simple, but learning fourier analysis in a couple of weeks has left me Decimated-in-Mind and I cannot seem to see it.

    Read the article

  • Wrong java -version being reported

    - by Malachi
    I am running Windows 7 Professional x64 and have the following Java versions installed: x64 C:\Program Files\Java jdk1.6.0_24 jdk1.7.0_04 jdk1.7.0_07 jre6 jre7 x86 C:\Program Files (x86)\Java jre1.6.0_07 jre6 jre7 in my environment variables I have my PATH containing C:\Program Files\Java\jdk1.6.0_24\bin and JAVA_HOME set to C:\Program Files\Java\jdk1.6.0_24\bin However running java -version reports java version "1.7.0_07" Java(TM) SE Runtime Environment (build 1.7.0_07-b10) Java HotSpot(TM) 64-Bit Server VM (build 23.3-b01, mixed mode) How is this the case when there is no reference to this version of Java in my Environment variables. Any help on this issue would be great as I am trying to run Apache ANT using Java 1.6.

    Read the article

  • Windows Azure Horror Story: The Phantom App that Ate my Data

    - by jasont
    Originally posted on: http://geekswithblogs.net/jasont/archive/2013/10/31/windows-azure-horror-story-the-phantom-app-that-ate-my.aspxI’ve posted in the past about how my company, Stackify, makes some great tools that enhance the Windows Azure experience. By just using the Azure Management Portal, you don’t get a lot of insight into what is happening inside your instances, which are just Windows VMs. This morning, I noticed something quite scary, and fittingly enough, it’s Halloween. I deleted a deployment after doing a new deployment and VIP swap. But, after a few minutes, the instance still appeared in my Stackify dashboard. I thought this odd, as we monitor these operations and remove devices that have been deleted. Digging in showed that it wasn’t a problem with Stackify. This instance was still there, and still sending data. You’ll notice though that the “Status” check shows that the instance no longer exists. And it gets scarier. I quickly checked the running services, and sure enough, the Windows Azure Guest Agent (which runs worker roles) was still running: “Surely, this can’t be” I’m thinking at this point. Knowing that this worker role is in our QA environment, it has debug logging turned on. And, using our log file tailing feature, I can see that, yes, indeed, this deleted deployment is still executing code. Pulling messages off queues. Sending alerts. Changing data. Fortunately, our tools give me the ability to manually disable the Windows service that runs this code. In the meantime, I have contacted everyone I know (and support) at Microsoft to address this issue. Needless to say, this is concerning. When you delete a deployment, it needs to actually delete. Not continue to eat your data. As soon as I learn more, I’ll be posting an update.

    Read the article

  • ImageResizer - AzureReader2 with Azure SDK 2.2

    - by Chris Skardon
    Originally posted on: http://geekswithblogs.net/cskardon/archive/2013/10/29/imageresizer---azurereader2-with-azure-sdk-2.2.aspxSo Azure SDK 2.2 came out recently, which means I can open my azure projects in VS 2013 (yay), so I decided to do an upgrade of my MVC4 project to MVC5, I followed this link on how to do the upgrade, and generally things went ok. I fire up my app, and run into a ‘binding’ issue, that AzureReader2 was trying to use Microsoft.WindowsAzure.Storage, Version=2.1.0.0 but alas, it couldn’t find it. I am not the only one (see stackoverflow), and one solution is to run ‘Add-BindingRedirect’ from the Package Manager Console, but that didn’t solve the problem for me, as it didn’t pick up on the Azure stuff, so I resorted to adding the redirect manually. So, in short, to get AzureReader2 to work with Azure SDK 2.2, you need to add the following to your web.config: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <!-- Other bindings here! --> <dependentAssembly> <assemblyIdentity name="Microsoft.WindowsAzure.Storage" publicKeyToken="31bf3856ad364e35" culture="neutral"/> <bindingRedirect oldVersion="0.0.0.0-2.1.0.3" newVersion="2.1.0.3"/> </dependentAssembly> </assemblyBinding>

    Read the article

  • Media player only works as administrator?

    - by Jeremy
    It seems I can only get Media Player 12 to work as administrator. If I run it normally (I am in the administrator group on my local PC) and right click on Music, and choose Manage Music Library. Media Player will sit and think for 5 or so seconds, then just not do anying, no dialog, no error. If I run as administator I can now get into the Manage Music Library dialog and add my a public folder containing my music. I've even tried granting everyone access to the public folder. One thing to note is that I have recently set up a domain controller and added my PC to the domain. With my local account I never noticed this problem, but I've since created a domain account and am now seeing this issue. I can't find much difference between the local and domain accounts - both are in the administrator group. Why would WMP require run as administrator? OS, Windows 7 64bit

    Read the article

  • Linux Bridge, Samba netbios name/hostname access

    - by Christopher Wilson
    I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

    Read the article

  • Want to add a new domain to my postfix, but mails not delivered (mail look back to myself)

    - by user74850
    Hi everybody, My host relay is working but I was aksed to add a new domain (like external.example.com). I have added in main.cf the new fqdn in relay_domains relay_domains = $mydestination, example.com,example2.com, externe.example.com and in transport example.com smtp:[192.168.1.22] example2.com smtp:[192.168.1.22] external.example.com smtp:[192.168.1.22] Mails sent to users with example.com and example2.com domain are well delivered. But for mails to external.example.com i got this message Mar 17 16:47:52 relayhost postfix/smtp[11948]: 754E1876A01: to=<[email protected]>, relay=relayhost2.example.com[80.81.82.83]:25, delay=19555, delays=19525/0.01/30/0, dsn=4.4.6, status=deferred (mail for external.example.com loops back to myself) I read another Q/A about the same issue right here, but it's not helping me. Can you ?

    Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >