Search Results

Search found 32568 results on 1303 pages for 'linux pwns mac'.

Page 545/1303 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

• Nginx Ubuntu Postfix Config - Can't connect to incoming IMAP server 'server not responding' but can send mail via outgoing using same details?

  - by daveaspinall

  I'm pretty to new server admin and especially nginx but seem to be getting ok fine apart from accessing my mail via my iPhone? I've changed my domain to 'domain.com' The thing is I can send mail via my outgoing IMAP server but can't connect to the incoming one? I just get the message "the mail server at mail.domain.com is not responding" /etc/postfix/main.cf alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mydestination = domain.com, mail.domain.com, localhost.com, , localhost, localhost.localdomain mydomain = domain.com myhostname = mail.domain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname recipient_delimiter = + relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom telnet localhost 25 ehlo locahost 250-mail.domain.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN Using the following details to connect: username password hostname: mail.domain.com port: 25 iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I also sent mail to the server as a test and got this missage if it helps? Technical details of temporary failure: [mail.domain.com. (10): Connection refused] I also looked in /var/log/mail.log and it has multiple entries of: postfix/smtpd[12239]: connect from 5acefc9a.bb.sky.com[90.206.252.xxx] Mar 23 06:47:09 new-domain postfix/smtpd[12239]: lost connection after CONNECT from 5acefc9a.bb.sky.com[90.206.252.154] Notice new-domain which is incorrect but the server hostname and hostname in the configs are correct? I recently moves servers and the host has set the primary domain on the service as new-domain.com so this may be the issue? Like I said, it works to connect to outgoing server, but incoming gets the not responding error? Any idea would be much appreciated!

  Read the article

• How to ask Debian not to check last mount time of its file system?

  - by Landy

  I'm using Debian 6.0.5. To test a feature of my product, I need to modify the system date&time back and forth frequently. Once a time I set the system date back to one month ago, then I reboot the system, and it reported the last mount time of the file system is in the future and enter the maintenance mode automatically. I had to run the fsck to make sure the file system is not broken to boot into Debian. Is there any way to ask Debian stop checking the last mount time of its file system when booting? Thanks.

  Read the article

• How can I use a keyfile on a removable USB drive for my encrypted root in Debian?

  - by naivem

  Recently set up root encryption with a couple of LVM volumes inside one LUKS volume, and I am just a little confused as to how I would go about getting it to automatically unlock using a keyfile stored on a USB flash drive, I presume I would have to put the drive in the fstab inside my initramfs (if there is one), and add a hook for USB device support. But I digress, essentially, I want to know what I have to do to enable my LUKS volume (containing all of my partitions sans /boot) to unlock using a keyfile stored on a USB flash drive, rather than a manually entered passphrase.

  Read the article

• Iptables ignoring a rule in the config file

  - by Overdeath

  I see lot of established connections to my apache server from the ip 188.241.114.22 which eventually causes apache to hang . After I restart the service everything works fine. I tried adding a rule in iptables -A INPUT -s 188.241.114.22 -j DROP but despite that I keep seeing connections from that IP. I'm using centOS and i'm adding the rule like thie: iptables -A INPUT -s 188.241.114.22 -j DROP Right afther that I save it using: service iptables save Here is the output of iptables -L -v ` Chain INPUT (policy ACCEPT 120K packets, 16M bytes) pkts bytes target prot opt in out source destination 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any c-98-210-5-174.hsd1.ca.comcast.net anywhere 0 0 DROP all -- any any c-98-201-5-174.hsd1.tx.comcast.net anywhere 0 0 DROP all -- any any lg01.mia02.pccwbtn.net anywhere 0 0 DROP all -- any any www.dabacus2.com anywhere 0 0 DROP all -- any any 116.255.163.100 anywhere 0 0 DROP all -- any any 94.23.119.11 anywhere 0 0 DROP all -- any any 164.bajanet.mx anywhere 0 0 DROP all -- any any 173-203-71-136.static.cloud-ips.com anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any 74.122.177.12 anywhere 0 0 DROP all -- any any 58.83.227.150 anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere 0 0 DROP all -- any any v1.oxygen.ro anywhere Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 186K packets, 224M bytes) pkts bytes target prot opt in out source destination `

  Read the article

• SQUID Transparent SSL proxy (no intercept)

  - by user974896

  I know how to have squid work as a transparent proxy. You put it into transparent mode then use your router or IPTABLES to forward port 80 to the squid port. I would like to do the same for SSL. Every guide I see mentions setting up keys on the squid server. I do not want squid to actually decrypt the SSL traffic then establish a connection with the server, rather I would like squid to simply forward the SSL traffic as is. The only thing I would like to do is be able to check the SSL request for any offending IPs and drop the packets if the destination is one of them.

  Read the article

• How can I change the default domain in an OTRS installation?

  - by Jamie

  I used a turnkeylinux.org otrs installation and I'm trying to configure the default domain of 'yourhost.example.com'. I tried the following: sed -ri 's/yourhost.example.com/mydomain.com/' /usr/share/otrs/Kernel/Config/Defaults.pm sudo shutdown -r now The next time I logged and tried to create a user, the default domain was still there. How can I change default doamin in an OTRS installation?

  Read the article

• where are deleted files kept?

  - by ant2009

  Hello, Ubuntu 9.10 I recently deleted some files. I would like to know are the files kept in a directory? Like in windows recycle bin. I would like to know where these files are? Many thanks for any suggestions,

  Read the article

• Remote access to phpmyadmin from computer belongs to same LAN

  - by Charles

  OK... I solved it. It is because I have not configured the httpd.conf to allow the centos listen port 80 and 8080. Listen 80 Listen 8080 I have setup the myphpadmin on my CentOS 6.4 recently. I can access and login to the myphpadmin on my localhost. However, when I type http://[hostipaddr]/phpmyadmin on my other computer in the same LAN with the CentOS, the browser simply cannot access the page. Below are some of the current configuration. Anyone can help please......? config.inc.php $i++; /* Authentication type */ $cfg['Servers'][$i]['auth_type'] = 'http'; /* Server parameters */ $cfg['Servers'][$i]['host'] = 'localhost'; $cfg['Servers'][$i]['connect_type'] = 'tcp'; $cfg['Servers'][$i]['compress'] = false; /* Select mysql if your server does not have mysqli */ $cfg['Servers'][$i]['extension'] = 'mysql'; $cfg['Servers'][$i]['AllowNoPassword'] = false; phpmyadmin.conf <Directory /var/www/html/phpmyadmin/> order allow,deny allow from all </Directory> Furthermore, I can access the webpage that stored in the CentOS from my other computer without problems. After using wireshark and tcpdump, I found that the server (the Cent OS) keep resetting the connection. (192.168.1.106 is my other computer, 192.168.1.101 is my CentOS) 23:29:42.281473 IP 192.168.1.106.55999 > 192.168.1.101.webcache: Flags [S], seq 2559409090, win 65535, options [mss 1460,nop,wscale 8,nop,nop,sackOK], length 0 23:29:42.281504 IP 192.168.1.101.webcache > 192.168.1.106.55999: Flags [R.], seq 0, ack 2559409091, win 0, length 0 I have disabled the iptables service on the CentOS already.

  Read the article

• NTP configuration not recognized?

  - by Eugene S

  I'm trying to configure NTP on my machine but it seems that the parameters I set are not being read by the system. Below is my /etc/ntp.conf file. (I applied the most basic configuration to eliminate other issues) server 10.45.68.47 server 127.0.0.1 After I set the above configuration, I restart the ntpd process by doing the following: service ntpd restart And then I get the following output: Shutting down ntpd: [ OK ] ntpd: Synchronizing with time server: [FAILED] Starting ntpd: [ OK ] Moreover, I can see the following in /var/etc/messages: Apr 2 10:54:07 hsystem1a ntpd[21067]: ntpd exiting on signal 15 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer1 Apr 2 10:54:07 hsystem1a ntpdate[21537]: can't find host ntpServer2 Apr 2 10:54:07 hsystem1a ntpdate[21537]: no servers can be used, exiting So it seems that the ntpServer1 and the ntpServer2 are being read from somewhere instead of the IPs I configured in /etc/ntp.conf. NOTE: I done init 6 on the machine just in case. Thanks!

  Read the article

• Remote Program (via ssh) suspends when leaving client computer

  - by Philipp F

  I'm working with MATLAB on a remote computer logging in via ssh -X remotepc and running matlab like matlab &. When I start a long-running process and leave the computer, it seems to suspend the process (after like 30mins being away) such that there is nearly no progress over night. As soon as I come back and wake up the client, the remote process continues with the calculation. I can see this from the load-average values (uptime) Why is that and how can I change this behaviour?

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• Preventing - Large Number of Failed Login Attempts from IP

  - by Silver89

  I'm running a CentOS 6.3 server and currently receive emails entitled "Large Number of Failed Login Attempts from IP" from my server every 15 minutes or so. Surely with the below configured it should mean only the person using the (my static ip) should be able to even try and log in? If that's the case where are these remote unknown users trying to log into which is generating these emails? Current Security Steps: root login is only allowed without-password StrictModes yes SSH password login is disabled - PasswordAuthentication no SSH public keys are used SSH port has been changed to a number greater than 40k cPHulk is configured and running Logins limited to specific ip address cPanel and WHM limited to my static ip only hosts.allow sshd: (my static ip) vsftpd: (my static ip) whostmgrd: (my static ip) hosts.deny ALL : ALL

  Read the article

• Yum install packages to an alternate directory, without chroot?

  - by Stefan Lasiewski

  I would like to use the Foswiki yum repository to install Foswiki (296 packages). The default installation path is /var/lib/, but I want to install it to an alternate location at /opt/www/. In the future, I still want to use yum to check for and apply updates to the packages. Is it possible to use yum to install packages to an location which is different then the default location provided by RPMs? Does Yum provide anything similar to ./configure --prefix=/usr/local/ or rpm --install --prefix=/opt/local? Yum provides the --installroot option, but that appears to primarily for chroot environments.

  Read the article

• Advertise a subnet route with radvd

  - by Thomas Berger

  we have set up a small IPv6 Testing network. The setup looks like this: ::/0 +----------+ | Firewall | Router to the public net +----------+ | 2001:...::/106 | +----------+ +-------| SIT GW | sit Tunnel gatway to the some test users | +----------+ | +----------+ | Test Sys | Testsystem +----------+ The idea is to advertise the default route from the firewall and the route for the SIT subnets from the sit gateway. The configurations for radvd are: # Firewall interface eth0 { AdvSendAdvert on; route ::/0 { }; }; # SIT Gatway interface eth0 { AdvSendAdvert on; route 2001:...::/106 { }; }; We have captured the adv. packages with tcpdump and the packages looks good. We see a default route from the fw, and the subnet route from the SIT gatway. But if we look on the testsystem there are two default routes over both gateways. There is no subnet route. The routing does not work of course. Here the routes we get: 2001:.....::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::baac:6fff:fe8e:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 default via fe80::e415:aeff:fe12:XXXX dev eth0 proto kernel metric 1024 expires 0sec mtu 1500 advmss 1440 hoplimit 64 Any Idea?

  Read the article

• installPrep.sh / validate.pl for Oracle 11g database on Red Hat EL 5

  - by cagcowboy

  For Oracle 9i + 10g (database), there used to be a really helpful script that you could run to validate your environment was correct before you did the install. Does such a thing exist for 11g does anyone know? Or is the validation finally done by the OUI? If something similar does still exist, please can someone point me in the right direction?

  Read the article

• vim: remove previous code indentation and convert to another

  - by ramgorur

  I have a c project with multiple files (more than 100), the codes are written in Whitesmiths style, but I want to change them into K&R style indentation. Is it possible to do using vim in an automated way ? For example I have a emacs-lisp script to achieve this -- (progn (find-file "{}") (mark-whole-buffer) (setq indent-tabs-mode nil) (untabify (point-min) (point-max)) (indent-region (point-min) (point-max) nil) (save-buffer)) I was wondering if there is a similar trick that could be done with vim.

  Read the article

• Light Weight Virtual Machines / *nix Distributions

  - by rjstelling

  Does anyone maintain a list of Light Weight *nix distributions, ideally just a VM that can be downloaded.

  Read the article

• mongod fork vs nohup

  - by Daniel Kitachewsky

  I'm currently writing process management software. One package we use is mongo. Is there any difference between launching mongo with mongod --fork --logpath=/my/path/mongo.log and nohup mongod >> /my/path/mongo.log 2>&1 < /dev/null & ? My first thought was that --fork could spawn more processes and/or threads, and I was suggested that --fork could be useful for changing the effective user (downgrading privileges). But we run all under the same user (process manager and mongod), so is there any other difference? Thank you

  Read the article

• javascript doesn't seem to be able to post form data (nginx server w/ php-fpm)

  - by Jones

  So the situation is like so: I have a nginx server with php-fpm installed. All is well and the site scripts and all work perfectly. I am able to use html to POST form data and it works just fine. However, There seems to be be some correlation between javascript, the POST protocol and nothing happening. I cant seem to determine the issue. Example: I have a user login widget that uses javascript on submit the fields and POST the data to a backend auth script which returns a server message that then populates the login box saying something like "Login Successful" followed by reloading the page to properly enable content. Problem is, nothing happens when you hit submit. I do know the setup works because i had it working on apache before migrating. Also if it makes any difference, the server is a Amazon EC2 instance using the Amazon AMI. I really dont know where to start looking on this one, but below is my default.conf for the server: upstream backend_get { server 127.0.0.1:80 weight=1; } upstream backend_post { server 127.0.0.1:80 weight=1; } #Main website url server { listen 80; server_name server.com; #charset koi8-r; access_log logs/host.access.log main; error_log logs/host.error.log; location / { root /usr/share/nginx/html; index index.php index.html index.htm; if ($request_method = POST) { proxy_pass http://backend_post; break; } } location ~ \.php$ { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } }

  Read the article

• How do I start mysqld with options

  - by xiankai

  I need to start up mysqld with command line options as from here: http://dev.mysql.com/doc/refman/5.1/en/server-options.html#option_mysqld_skip-grant-tables I normally do sudo service mysqld start, but passing the option as sudo service mysqld start --skip-grant-tables does not seem to work. Alternatively I have tried starting as a daemon, sudo mysqld_safe --skip-grant-tables & But it seems to terminate too soon: 131101 04:59:57 mysqld_safe Logging to '/var/lib/mysql/vagrant.example.com.err'. 131101 04:59:57 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131101 05:00:03 mysqld_safe mysqld from pid file /var/lib/mysql/vagrant.example.com.pid ended My last option seems to specify the option in /etc/my.cnf instead, but is there any way to do it via the command line?

  Read the article

• Setting umask for all users

  - by Yarin

  I'm trying to set the default umask to 002 for all users including root on my CentOS box. According to this and other answers, this can be achieved by editing /etc/profile. However the comments at the top of that file say: It's NOT a good idea to change this file unless you know what you are doing. It's much better to create a custom.sh shell script in /etc/profile.d/ to make custom changes to your environment, as this will prevent the need for merging in future updates. So I went ahead and created the following file: /etc/profile.d/myapp.sh with the single line: umask 002 Now, when I create a file logged in as root, the file is born with 664 permissions, the way I had hoped. But files created by my Apache wsgi application, or files created with sudo, still default to 644 permissions... $ touch newfile (as root): Result = 664 (Works) $ sudo touch newfile: Result = 644 (Doesn't work) Files created by Apache wsgi app: Result = 644 (Doesn't work) Files created by Python's RotatingFileHandler: Result = 644 (Doesn't work) Why is this happening, and how can I ensure 664 file permissions system wide, no matter what creates the file? UPDATE: I ended up finding a cleaner solution to this on a per-directory basis using ACLs, which I describe here.

  Read the article

• How can I fix Problems with interlaced video jerking/flicking when playedback on DVD players? (Mixin

  - by Simon P Stevens

  I'm trying to make a DVD and the final DVD jerks when played on standalone DVD players. It seems to play fine on PCs. I think the problem may be to do with interlacing settings when rendering the final output, but I'll outline the whole editing process I have followed in case I've made a mistake somewhere else. Most of the footage comes from a sony handy cam (one of those mini DVD ones) so isn't great quality. It was set to "high quality" (haha) and 16:9 aspect ratio when it was recorded. I copy the files directly from the mini DVDs onto the hard drive and import them into Cinelerra. In Cinelerra I set the format to 25fps, 720x576, RGBA-8bit, 16:9, interlaced bottom fields first. When I've finished the editing, I add a Fields to frames effect (set to bottom first) to each video track. I render to audio and video separately: Audio: AC3, 128kbps Video: YUV4MPEG steam, video pipe settings: ffmpeg -f yuv4mpegpipe -i - -y -target dvd -flags +ilme+ildct mpeg2video % Cinelerra often crashes during the rendering, so I set it to generate a new video file at each label, and combine them using cat when I've got a sucesful render of each one. Once I've combined them, I use mencoder to re-index them: mencoder -forceidx -oac copy -ovc copy merged.m2v -o mergedReIndexed.m2v I combine the audio and video files using ffmpeg: ffmpeg -i AudioFile.ac3 -i VideoFile.m2v -target dvd -flags +ilme+ildct FinalMovie.mpg Then I build the menus with spumux and I create the DVD file system with dvdauthor, and finally I write it do a dvd-r like this: nice -n -20 growisofs -dvd-compat -speed=2 -Z /dev/dvd -dvd-video -V VIDEO ./ && eject /dev/dvd Originally, when I did it the DVD flickered badly, so as suggested in a guide I added the fields to frames effect in cinelerra. Now it doesn't "flicker", but has become "jerky" when there is lots of motion, particularly when the camera is moving, so the whole background moves. This is what I've tried so far: Removed "mpeg2video" from cinelerra video render pipe. Removed +ilme from render pipe. Removed +ildct from render pipe. Removed +ilme from render audio/video rejoin command. Removed +ildct from render audio/video rejoin command. Added -alt to render pipe. Added -alt to render audio/video rejoin command. Tried with and without the frames to fields effect in Cinelerra. and various combinations of the above. I've also tried this: change the Cinelerra fps to 50, use fields to frames (instead of frames to fields), render to an intermediate QTforlinux jpeg video stream, re-importing that back into Cinelerra, adding a frames to fields effect and then rendering that output as normal (@25fps), and I still have the same problem. Has anyone experienced this "jerking" playback before? Can anyone give any suggestions on how to fix it? (Like I say, it plays back fine on a PC, but not on any of the standalone players I've tried)

  Read the article

• Can the expect utility handle a case where the process it spawns also spawns a sub process?

  - by davidparks21

  I'm trying to use expect to handle rsync over an ssh shell, but it gets stuck. If I run my rsync command it works (simplified here): It prompts me for my password and copies files to the server: rsync -e ssh -<other_params> If I then enclose that in expect: expect -d -c "spawn rsync -e ssh -<other_params>" -c "expect password:" -c "send mypass\r" It does not execute properly, the program exists and no files are copied. Even the debug mode isn't giving many clues. My best guess is that rsync is spawning the ssh process, and the ssh process is what needs to be interacted with, but send is picking up the rsync process id and sending the input there. Any thoughts?

  Read the article

• Minimize VirtualBox Hard Drive disk

  - by Aviv

  I have Ubuntu Server 10.04 TLS installed on a Virtual Machine in a VirtualBox. The size of the Hard Drive is dynamic growing hard drive and the maximum is 32GB. At the beginning i had 4GB on the Hard Drive and the size of the .vdi was 4GB. Lately the size of data on the disk is 15GB but the size of the .vdi is almost 32GB. Why is that? How can i pack / optimize / defrag the HD so it will be the same size of the data on the disk? Thanks.

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >