Search Results

Search found 21524 results on 861 pages for 'multiple matches'.

Page 545/861 | < Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >

  • Maintaining packages with code - Adding a property expression programmatically

    Every now and then I've come across scenarios where I need to update a lot of packages all in the same way. The usual scenario revolves around a group of packages all having been built off the same package template, and something needs to updated to keep up with new requirements, a new logging standard for example.You'd probably start by updating your template package, but then you need to address all your existing packages. Often this can run into the hundreds of packages and clearly that's not a job anyone wants to do by hand. I normally solve the problem by writing a simple console application that looks for files and patches any package it finds, and it is an example of this I'd thought I'd tidy up a bit and publish here. This sample will look at the package and find any top level Execute SQL Tasks, and change the SQL Statement property to use an expression. It is very simplistic working on top level tasks only, so nothing inside a Sequence Container or Loop will be checked but obviously the code could be extended for this if required. The code that actually sets the expression is shown below, the rest is just wrapper code to find the package and to find the task. /// <summary> /// The CreationName of the Tasks to target, e.g. Execute SQL Task /// </summary> private const string TargetTaskCreationName = "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; /// <summary> /// The name of the task property to target. /// </summary> private const string TargetPropertyName = "SqlStatementSource"; /// <summary> /// The property expression to set. /// </summary> private const string ExpressionToSet = "@[User::SQLQueryVariable]"; .... // Check if the task matches our target task type if (taskHost.CreationName == TargetTaskCreationName) { // Check for the target property if (taskHost.Properties.Contains(TargetPropertyName)) { // Get the property, check for an expression and set expression if not found DtsProperty property = taskHost.Properties[TargetPropertyName]; if (string.IsNullOrEmpty(property.GetExpression(taskHost))) { property.SetExpression(taskHost, ExpressionToSet); changeCount++; } } } This is a console application, so to specify which packages you want to target you have three options: Find all packages in the current folder, the default behaviour if no arguments are specified TaskExpressionPatcher.exe .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find all packages in a specified folder, pass the folder as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\ .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find a specific package, pass the file path as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\Package.dtsx The code was written against SQL Server 2005, but just change the reference to Microsoft.SQLServer.ManagedDTS to be the SQL Server 2008 version and it will work fine. If you get an error Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008… then check that the package is from the correct version of SSIS compared to the referenced assemblies, 2005 vs 2008 in other words. Download Sample Project TaskExpressionPatcher.zip (6 KB)

    Read the article

  • Word 2013: Get the page number for the previous page

    - by Mike Anthony
    I'm trying to accomplish something very simple in Word 2013, but the feature does not seem to be available, nor can I work it out with field codes. I simply want to include, on multiple pages, "continued from page n". In terms of field codes, I have tried this: { = PAGE - 1 \* MERGEFORMAT } It just tells me that PAGE is not a defined bookmark. Is there any way that this can be done? Edit: Per documentation I found somewhere, I also tried this - but with no luck: { = { PAGE } - 1 } This just threw Syntax Error, { back, which leads me to assume that it's incompatible with newer versions of Word.

    Read the article

  • Is it possible to rename an open Word document without closing it?

    - by RoboShop
    I just ask this question as I do not believe that after so many versions of Word, it wouldn't exist. Usually when I'm working on a document and I realize I have to rename it, I have to close the document down, go to file explorer and then rename it, and then opening it up again. It's a procedure that's so ingrained in my usage pattern that I didn't realize until now that I'm actually having to open and close multiple windows/ applications etc. simply to rename a file. Surely, it's the year 2012, I should be able to do a simple thing like that with a few clicks right? So is there a way to just rename the file name of a word /excel / office document without having to close it first?

    Read the article

  • Bash: Variable substitution in variable name with default value

    - by krissi
    i have the following variables: # config file MYVAR_DEFAULT=123 MYVAR_FOO=456 #MYVAR_BAR unset # program USER_INPUT=FOO TARGET_VAR=<need to be set> If the USER_INPUT is "foo", I want TARGET_VAR to be the value of MYVAR_FOO (TARGET_VAR=456). If USER_INPUT is "bar" I want TARGET_VAR to be set to MYVAR_DEFAULT (123), because MYVAR_BAR is unset. I prefer it to be sh-compatible and as a substitution string. But it might also be bash compatible and/or in a function. I got these snippets: # Default values for variable (sh-compatible) echo ${MYVAR_FOO-$MYVAR_DEFAULT} # Uppercase (bash compatible) echo ${USER_INPUT^^} I would need something like this: TARGET_VAR="${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" # or somecommand -foo "${MYVAR_${USER_INPUT^^}-$MYVAR_DEFAULT}" This is to switch a bunch of variables between multiple "profiles". In the example, FOO and BAR are profiles. New profiles should be added easily, in this example there would be an implicit profile named BAZ, too, all variables to their default values. Unfortunately it is not that easy. Do you have an idea to solve this? Thanks in advance, krissi

    Read the article

  • How to make a legacy system time-zone sensitive?

    - by Jerry Dodge
    I need to implement time zones in a very large and old Delphi system, where there's a central SQL Server database and possibly hundreds of client installations around the world in different time zones. The application already interacts with the database by only using the date/time of the database server. So, all the time stamps saved in both the database and on the client machines are the date/time of the database server when it happened, never the time of the client machine. So, when a client is about to display the date/time of something (such as a transaction) which is coming from this database, it needs to show the date/time converted to the local time zone. This is where I get lost. I would naturally assume there should be something in SQL to recognize the time zone and convert a DateTime field dynamically. I'm not sure if such a thing exists though. If so, that would be perfect, but if not, I need to figure out another way. This Delphi system (multiple projects) utilizes the SQL Server database using ADO components, VCL data-aware controls, and QuickReports (using data sources). So, there's many places where the data goes directly from the database query to rendering on the screen, without any code to actually put this data on the screen. In the end, I need to know when and how should I get the properly converted time? What is the proper way to ensure that I handle Dates and Times correctly in a legacy application?

    Read the article

  • match and export subject line and from header with procmail

    - by Nick
    I would like to use procmail or a combination of procmail and formail to take an email message and match a specific keyword in the Subject: line/header, and if matched, export the contents of the Subject: line/header, and the contents of the From: line/header to a perl script. I have researched this, and have not been able to get this working all the way. I am new to procmail, and I assume I need to use a nesting block, but I am not sure how to get the data and then export it. I have been able to match the subject line and export it to a perl script where it is read via ARGV0, but get lost when trying to export and match multiple fields. I tried subscribing to the procmail listserv, but it appears to be broken. Can someone help me with this, please?

    Read the article

  • How to symlink folders and exclude certain files

    - by Jarrod White
    Hey Guys, I'm not a server guru (unfortunately) but have a decent knowledge of linux & bsd. I'm trying to symlink multiple instances of HLDS (game server) but need to exclude certain folders & config files to achieve this properly. I need to do it this way as HLDS loads many mods automatically, and putting an exception to disable the mods doesnt work for all of them. so basically i want: /home/user/hlds-install (the base install) /home/user/server1 /home/user/server2 etc... and then be able to manually put any configs/mods ive excluded into the server dir's so that each server can be configured individually. Can anyone tell me how to do this, perhaps some sort of bash script so that I can just change the targets to run it each time i want to create a new one. I have quite a number to make so doing the whole thing manually for each one definately isn't an option and im all for working smarter, not harder! Thanks :)

    Read the article

  • WebCenter Content (WCC) Trace Sections

    - by Kevin Smith
    Kyle has a good post on how to modify the size and number of WebCenter Content (WCC) trace files. His post reminded me I have been meaning to write a post on WCC trace sections for a while. searchcache - Tells you if you query was found in the WCC search cache. searchquery - Shows the processing of the query as it is converted form what the user submitted to the end query that will be sent to the database. Shows conversion from the universal query syntax to the syntax specific to the search solution WCC is configured to use. services (verbose) - Lists the filters that are called for each service. This will let you know what filters are available for each service and will also tell you what filters are used by WCC add-on components and any custom components you have installed. The How To Component Sample has a list of filters, but it has not been updated since 7.5, so it is a little outdated now. With each new release WCC adds more filters. If you have a filter that has no code attached to it you will see output like this: services/6    09.25 06:40:26.270    IdcServer-423    Called filter event computeDocName with no filter plugins registered When a WCC add-on or custom component uses a filter you will see trace output like this: services/6    09.25 06:40:26.275    IdcServer-423    Calling filter event postValidateCheckinData on class collections.CollectionValidateCheckinData with parameter postValidateCheckinDataservices/6    09.25 06:40:26.275    IdcServer-423    Calling filter event postValidateCheckinData on class collections.CollectionFilters with parameter postValidateCheckinData As you can see from this sample output it is possible to have multiple code points using the same filter. systemdatabase - Dumps the database call AFTER it executes. This can be somewhat troublesome if you are trying to track down some weird database problems. We had a problem where WCC was getting into a deadlock situation. We turned on the systemdatabase trace section and thought we had the problem database call, but it turned out since it printed out the database call after it was executed we were looking at the database call BEFORE the one causing the deadlock. We ended up having to turn on tracing at the database level to see the database call WCC was making that was causing the deadlock. socketrequests (verbose) - dumps the actual messages received and sent over the socket connection by WCC for a service. If you have gzip enabled you will see junk on the response coming back from WCC. For debugging disable the gzip of the WCC response.Here is an example of the dump of the request for a GET_SEARCH_RESULTS service call. socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: REMOTE_USER=sysadmin.USER-AGENT=Java;.Stel socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: lent.CIS.11g.CONTENT_TYPE=text/html.HEADER socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: _ENCODING=UTF-8.REQUEST_METHOD=POST.CONTEN socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: T_LENGTH=270.HTTP_HOST=CIS.$$$$.NoHttpHead socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: ers=0.IsJava=1.IdcService=GET_SEARCH_RESUL socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: [email protected] socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: calData.SortField=dDocName.ClientEncoding= socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: UTF-8.IdcService=GET_SEARCH_RESULTS.UserTi socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: meZone=UTC.UserDateFormat=iso8601.SortDesc socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: =ASC.QueryText=dDocType..matches..`Documen socketrequests/6 09.25 06:46:02.501 IdcServer-6 request: t`.@end. userstorage, jps - Provides trace details for user authentication and authorization. Includes information on the determination of what roles and accounts a user has access to. In 11g a new trace section, jps, was added with the addition of the JpsUserProvider to communicate with WebLogic Server. The WCC developers decide when to use the verbose option for their trace output, so sometime you need to try verbose to see what different information you get. One of the things I would always have liked to see if the ability to turn on verbose output selectively for individual trace sections. When you turn on verbose output you get it for all trace sections you have enabled. This can quickly fill up your trace files with a lot of information if you have the socket trace section turned on.

    Read the article

  • POP Forums v10 beta posted for ASP.NET MVC 4

    - by Jeff
    Finally got some momentum and replaced the beta formerly known as v9.3. You can get it here, where you’ll find the information below. You can also read my previous post on why I ditched jQuery Mobile. This is the beta for POP Forums v10, with the mobile special sauce. It requires ASP.NET MVC 4 RC, which you can download here. Of course, feel free to submit bugs to the issue tracker. See a live demo here: http://popforums.com/Forums What's new? Uses a very light weight CSS and Javascript package to provide a touch-friendly interface for mobile devices. Numbers are formatted (sensitive to culture) when 1,000 or higher. CSS is more integration friendly, and specific to the ForumContainer element. Mail delivery from queue is now parallel, so you can specify a sending interval, and the number of messages to process on each interval. Background "services" refactored, and will only run with a call on app start to PopForumsActivation.StartServices(). This is partly to facilitate future use in Web farms/multiple Web roles. Update to jQuery v1.7.1. Replaced use of .live() with .on() in script, pursuant to jQuery update, which deprecates .live(). FIX: Bug in topic repository around caching keys for single-server data layer. FIX: Pager links on recent topics pointed to incorrect route. FIX: Deleting a post didn't update last user/post time. FIX: Ditched attempt at writing to event log with super failures, since almost no one has permission in production. FIX: Bug in grayed-out fields in admin mail setup. FIX: Weird color profiles would break loading of images for resize. FIX: TOS text on account sign-up was double encoded. Known issues None yet, but ditching jQuery Mobile from the previous beta turned out to be a good decision.

    Read the article

  • Resealing windows XP stops PXE working

    - by zeocrash
    I'm trying to capture a drive image of a windows xp pro machine. I've gone through the steps and resealed the machine. When i try and network boot the PXE instantly gives the message "PXE-MOF" and ends. I have managed to get network boot to work on this machine whenever XP is not resealed. I have tried Multiple times to get PXE to work after resealing windows, but with no luck. As soon as i unseal it, PXE works every time. I know PXE is supposed to work independent of what's on the hard drive. Is there any way that resealing windows could cause PXE to stop working.

    Read the article

  • Are You Using Facebook with an Encrypted Session Yet?

    - by The Geek
    If you’re geeky and keep up with all the tech news, you probably already know that Facebook added an SSL feature, but for everybody else: You can make your Facebook profile more secure by turning this option on, and here’s how to do it. All we’re going to do is head into the Facebook profile settings and then check a box that forces the use of SSL encryption whenever possible. Easy Latest Features How-To Geek ETC Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines RGB? CMYK? Alpha? What Are Image Channels and What Do They Mean? Project M Brings Classic Super Smash Bro Style Gameplay to the Wii Now Together and Complete – McBain: The Movie [Simpsons Video] Be Creative by Using Hex and RGB Codes for Crayola Crayon Colors on Your Next Web or Art Project [Geek Fun] Flash Updates; Finally Supports Full Screen Video on Multiple Monitors 22 Ways to Recycle an Altoids Mint Tin Make Your Desktop Go Native with the Tribal Arts Theme for Windows 7

    Read the article

  • Idea of an algorithm to detect a website's navigation structure?

    - by Uwe Keim
    Currently I am in the process of developing an importer of any existing, arbitrary (static) HTML website into the upcoming release of our CMS. While the downloading the files is solved successfully, I'm pulling my hair off when it comes to detect a site structure (pages and subpages) purely from the HTML files, without the user specifying additional hints. Basically I want to get a tree like: + Root page 1 + Child page 1 + Child page 2 + Child child page1 + Child page 3 + Root page 2 + Child page 4 + Root page 3 + ... I.e. I want to be able to detect the menu structure from the links inside the pages. This has not to be 100% accurate, but at least I want to achieve more than just a flat list. I thought of looking at multiple pages to see similar areas and identify these as menu areas and parse the links there, but after all I'm not that satisfied with this idea. My question: Can you imagine any algorithm when it comes to detecting such a structure? Update 1: What I'm looking for is not a web spider, but an algorithm do create a logical tree of the relationship of the pages to be able to create pages and subpages inside my CMS when importing them. Update 2: As of Robert's suggestion I'll solve this by starting at the root page, and then simply parse links as you go and treat every link inside a page simply as a child page. Probably I'll recurse not in a deep-first manner but rather in a breadth-first manner to get a more balanced navigation structure.

    Read the article

  • Resolution independence - resize on the fly or ship all sizes?

    - by RecursiveCall
    My game relies heavily on textures of various sizes with some being full-screen. The game is targeted for multiple resolutions. I found that resizing textures (downsizing) works quite well for this game’s art type (it’s not Pixel Art or anything like that). I asked my artist to ensure that all textures at the edges of the screen to be created in such a way that they can safely “overflow” off screen; this means that aspect ratio is not an issue. So with no aspect ratio issues, I figured that I would simply ask my artist to create assets in very high resolution, and then resize them down to the appropriate screen resolution. The question is, when and how do I do that? Do I pre-resize everything to common resolutions in Photoshop and package all assets in the final product (increasing the size download that the user has to deal with) and then select the appropriate asset based on the detected resolution? Or do I ship with the largest set of Textures, detect the resolution on load, set a render target and draw all downsized assets to it and use that? Or for the latter, do I use some sort of a CPU-sided algorithm to resize on game load?

    Read the article

  • 5 Things I Learned About the IT Labor Shortage

    - by Oracle Accelerate for Midsize Companies
    by Jim Lein | Sr. Principal Product Marketing Director | Oracle Midsize Programs | @JimLein Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} 5 Things I Learned About the IT Labor Shortage A gentle autumn breeze is nudging the last golden leaves off the aspen trees. It’s time to wrap up the series that I started back in April, “The Growing IT Labor Shortage: Are You Feeling It?” Even in a time of relatively high unemployment, labor shortages exist depending on many factors, including location, industry, IT requirements, and company size. According to Manpower Groups 2013 Talent Shortage Survey, 35% of hiring managers globally are having difficulty filling jobs. Their top three challenges in filling jobs are: 1. lack of technical competencies (hard skills) 2. Lack of available applicants 3. Lack of experience The same report listed Technicians as the most difficult position to fill in the United States For most companies, Human Capital and Talent Management have never been more strategic and they are striving for ways streamline processes, reduce turnover, and lower costs (see this Oracle whitepaper, “ Simplify Workforce Management and Increase Global Agility”). Everyone I spoke to—partner, customer, and Oracle experts—agreed that it can be extremely challenging to hire and retain IT talent in today’s labor market. And they generally agreed on the causes: a. IT is so pervasive that there are myriad moving parts requiring support and expertise, b. thus, it’s hard for university graduates to step in and contribute immediately without experience and specialization, c. big IT companies generally aren’t the talent incubators that they were in the freewheeling 90’s due to bottom line pressures that require hiring talent that can hit the ground running, and d. it’s often too expensive for resource-strapped midsize companies to invest the time and money required to get graduates up to speed. Here are my top lessons learned from my conversations with the experts. 1. A Better Title Would Have Been, “The Challenges of Finding and Retaining IT Talent That Matches Your Requirements” There are more applicants than jobs but it’s getting tougher and tougher to find individuals that perfectly fit each and every role. Top performing companies are increasingly looking to hire the “almost ready”, striving to keep their existing talent more engaged, and leveraging their employee’s social and professional networks to quickly narrow down candidate searches (here’s another whitepaper, “A Strategic Approach to Talent Management”). 2. Size Matters—But So Does Location Midsize companies must strive to build cultures that compete favorably with what large enterprises can offer, especially when they aren’t within commuting distance of IT talent strongholds. They can’t always match the compensation and benefits offered by large enterprises so it's paramount to offer candidates high quality of life and opportunities to build their resumes in alignment with their long term career aspirations. 3. Get By With a Little Help From Your Friends It doesn’t always make sense to invest time and money in training an employee on a task they will not perform frequently. Or get in a bidding war for talent with skills that are rare and in high demand. Many midsize companies are finding that it makes good economic sense to contract with partners for remote support rather than trying to divvy up each and every role amongst their lean staff. Internal staff can be assigned to roles that will have the highest positive impact on achieving organizational goals. 4. It’s Actually Both “What You Know” AND “Who You Know” If I was hiring someone today I would absolutely leverage the social and professional networks of my co-workers. Period. Most research shows that hiring in this manner is less expensive and time consuming AND produces better results. There is also some evidence that suggests new hires from employees’ networks have higher job performance and retention rates. 5. I Have New Respect for Recruiters and Hiring Managers My hats off to them—it’s not easy hiring and retaining top talent with today’s challenges. Check out the infographic, “A New Day: Taking HR from Chaos to Control”, on Oracle’s Human Capital Management solutions home page. You can also explore all of Oracle’s HCM solutions from that page based on your role. You can read all the posts in this series by clicking on the links in the right sidebar. Stay tuned…we’ll continue to post thought leadership on HCM and Talent Management topics.

    Read the article

  • MX Record for SubDomains

    - by Steve Sloka
    I want to be able to send email to any subdomain I like and not have to configure A records and MX records for each subdomain. Ideally I could send an email to [email protected] and [email protected] and not have to configure anything other than my original domain.com. My current setup: I have a domain (domain.com) and want to have multiple subdomains. (a.domain.com, b.domain.com, c.domain.com, etc). I have an MX record setup to point to domain.com and all email works fine for that domain. I have NOT setup A records for all the subdomains (and really don't want to).

    Read the article

  • Functional Methods on Collections

    - by GlenPeterson
    I'm learning Scala and am a little bewildered by all the methods (higher-order functions) available on the collections. Which ones produce more results than the original collection, which ones produce less, and which are most appropriate for a given problem? Though I'm studying Scala, I think this would pertain to most modern functional languages (Clojure, Haskell) and also to Java 8 which introduces these methods on Java collections. Specifically, right now I'm wondering about map with filter vs. fold/reduce. I was delighted that using foldRight() can yield the same result as a map(...).filter(...) with only one traversal of the underlying collection. But a friend pointed out that foldRight() may force sequential processing while map() is friendlier to being processed by multiple processors in parallel. Maybe this is why mapReduce() is so popular? More generally, I'm still sometimes surprised when I chain several of these methods together to get back a List(List()) or to pass a List(List()) and get back just a List(). For instance, when would I use: collection.map(a => a.map(b => ...)) vs. collection.map(a => ...).map(b => ...) The for/yield command does nothing to help this confusion. Am I asking about the difference between a "fold" and "unfold" operation? Am I trying to jam too many questions into one? I think there may be an underlying concept that, if I understood it, might answer all these questions, or at least tie the answers together.

    Read the article

  • Best practice settings Effect parameters in XNA

    - by hichaeretaqua
    I want to ask if there is a best practice settings effect parameters in XNA. Or in other words, what exactly happens when I call pass.Apply(). I can imagine multiple scenarios: Each time Apply() is called, all effect parameters are transferred to the GPU and therefor it has no real influence how often I set a parameter. Each time Apply() is called, only the parameters that got reset are transferred. So caching Set-operations that don't actually set a new value should be avoided. Each time Apply() is called, only the parameters that got changed are transferred. So caching Set-operations is useless. This whole questions is bootless because no one of the mentions ways has any noteworthy impact on game performance. So the final question: Is it useful to implement some caching of Set-operation like: private Matrix _world; public Matrix World { get{ return _world;} set { if(value == world)return; _effect.Parameters["xWorld"].SetValue(value); _world = value; } Thanking you in anticipation

    Read the article

  • Ubuntu 12.04 taking too much time to boot

    - by adarshdinesh
    Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

    Read the article

  • Sync Google Contacts with QuickBooks

    - by dataintegration
    The RSSBus ADO.NET Providers offer an easy way to integrate with different data sources. In this article, we include a fully functional application that can be used to synchronize contacts between Google and QuickBooks. Like our QuickBooks ADO.NET Provider, the included application supports both the desktop versions of QuickBooks and QuickBooks Online Edition. Getting the Contacts Step 1: Google accounts include a number of contacts. To obtain a list of a user's Google Contacts, issue a query to the Contacts table. For example: SELECT * FROM Contacts. Step 2: QuickBooks stores contact information in multiple tables. Depending on your use case, you may want to synchronize your Google Contacts with QuickBooks Customers, Employees, Vendors, or a combination of the three. To get data from a specific table, issue a SELECT query to that table. For example: SELECT * FROM Customers Step 3: Retrieving all results from QuickBooks may take some time, depending on the size of your company file. To narrow your results, you may want to use a filter by including a WHERE clause in your query. For example: SELECT * FROM Customers WHERE (Name LIKE '%James%') AND IncludeJobs = 'FALSE' Synchronizing the Contacts Synchronizing the contacts is a simple process. Once the contacts from Google and the customers from QuickBooks are available, they can be compared and synchronized based on user preference. The sample application does this based on user input, but it is easy to create one that does the synchronization automatically. The INSERT, UPDATE, and DELETE statements available in both data providers makes it easy to create, update, or delete contacts in either data source as needed. Pre-Built Demo Application The executable for the demo application can be downloaded here. Note that this demo is built using BETA builds of the ADO.NET Provider for Google V2 and ADO.NET Provider for QuickBooks V3, and will expire in 2013. Source Code You can download the full source of the demo application here. You will need the Google ADO.NET Data Provider V2 and the QuickBooks ADO.NET Data Provider V3, which can be obtained here.

    Read the article

  • Test a simple multi-player (upto four players) Android game in single developer machine

    - by Kush
    I'm working on a multi-player Android game (very simple it is that it doesn't have any game-engine used). The game is based on Java Socket. Four devices will connect the game server and a new thread will manage their session. The game server will server many such sessions (having 4 players each). What I'm worried about is the testing of this game. I know it is possible to run multiple android emulators, but my development laptop is very limited in capabilities (3 GB RAM, 2 Ghz Intel Core2Duo and on-board Graphics). And I'm already using Ubuntu to develop the game so that I have more user memory available than I'd have with Windows. Hence, the laptop will burn-to-death on running 4 emulator instances. I don't have access to any android device, neither I have another machine with higher configuration. And I still have to develop and test this game. P.S. : I'm a CS student, and currently don't work anywhere, and this game is college project, so if there are any paid solutions, I cannot afford it. What can I do to test the app seamlessly? ability to test even only 4 clients (i.e. only 1 session) would suffice, its alright if I can't simulate real environment with some 10-20 active game sessions (having 4 players each).

    Read the article

  • See Oracle GoldenGate 11g R2 Unveiled at Oracle OpenWorld

    - by Oracle OpenWorld Blog Team
    Oracle OpenWorld 2012 promises to be bigger than ever when it comes to Data Integration. The Data Integration track is full of product release updates, deep dives into key features, and customer presentations. Oracle GoldenGate 11g ’s latest release features will be presented in multiple sessions. In addition, customers, such as Raymond James, Comcast, Paychex, Ticketmaster, Bank of America, St. Jude Medical, Turk Telekom, Ross, and Aderas will present their projects with data integration products. Last but not least, hands-on-labs will cover deep dives into Oracle GoldenGate and introductions to key products such as Oracle Data Integrator and Oracle Enterprise Data Quality.Catch these must-see Data Integration sessions taking place at Moscone West 3005:·    Future Strategy, Direction, and Roadmap of Oracle’s Data Integration Platform: Monday, October 1 at 10:45 a.m.·    Real-Time Data Integration with Oracle Data Integrator at Raymond James: Monday, October 1 at 4:45 p.m.·    Real-World Operational Reporting with Oracle GoldenGate - Customer Panel: Tuesday, October 2 at 11:45 a.m.To stay in touch about the details and announcements for Oracle Data Integration, check out the Data Integration blog.

    Read the article

  • Apache2 alias in virtual host

    - by 0x7c00
    I have multiple virtual host in one server and plan to has some alias setup in one virtualhost. So I add the Alias /foo/ /path/to/foo/ in virtualhost directive,but it has no effect. request of host1/foo/ will return 404. But if I add this to /etc/apache2/mods-available/alias.conf, it works. But the problem is host2 will also share this alias. Is there a way to make the alias work only for host1? B.T.W, I use apache2ctl -l, there's no mod_alias.c listed, weird.

    Read the article

  • OO Design, how to model Tonal Harmony?

    - by David
    I have started to write a program in C++ 11 that would analyse chords, scales, and harmony. The biggest problem I am having in my design phase, is that the note 'C' is a note, a type of chord (Cmaj, Cmin, C7, etc), and a type of key (the key of Cmajor, Cminor). The same issue arises with intervals (minor 3rd, major 3rd). I am using a base class, Token, that is the base class for all 'symbols' in the program. so for example: class Token { public: typedef shared_ptr<Token> pointer_type; Token() {} virtual ~Token() {} }; class Command : public Token { public: Command() {} pointer_type execute(); } class Note : public Token; class Triad : public Token; class MajorTriad : public Triad; // CMajorTriad, etc class Key : public Token; class MinorKey : public Key; // Natural Minor, Harmonic minor,etc class Scale : public Token; As you can see, to create all the derived classes (CMajorTriad, C, CMajorScale, CMajorKey, etc) would quickly become ridiculously complex including all the other notes, as well as enharmonics. multiple inheritance would not work, ie: class C : public Note, Triad, Key, Scale class C, cannot be all of these things at the same time. It is contextual, also polymorphing with this will not work (how to determine which super methods to perform? calling every super class constructors should not happen here) Are there any design ideas or suggestions that people have to offer? I have not been able to find anything on google in regards to modelling tonal harmony from an OO perspective. There are just far too many relationships between all the concepts here.

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • How to protect UI components using OPSS Resource Permissions

    - by frank.nimphius
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid black 1.0pt; mso-border-alt:solid black .5pt; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid black; mso-border-insidev:.5pt solid black; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} ADF security protects ADF bound pages, bounded task flows and ADF Business Components entities with framework specific JAAS permissions classes (RegionPermission, TaskFlowPermission and EntityPermission). If used in combination with the ADF security expression language and security checks performed in Java, this protection already provides you with fine grained access control that can also be used to secure UI components like buttons and input text field. For example, the EL shown below disables the user profile panel tabs for unauthenticated users: <af:panelTabbed id="pt1" position="above">   ...   <af:showDetailItem        text="User Profile" id="sdi2"                                       disabled="#{!securityContext.authenticated}">   </af:showDetailItem>   ... </af:panelTabbed> The next example disables a panel tab item if the authenticated user is not granted access to the bounded task flow exposed in a region on this tab: <af:panelTabbed id="pt1" position="above">   ...   <af:showDetailItem text="Employees Overview" id="sdi4"                        disabled="#{!securityContext.taskflowViewable         ['/WEB-INF/EmployeeUpdateFlow.xml#EmployeeUpdateFlow']}">   </af:showDetailItem>   ... </af:panelTabbed> Security expressions like shown above allow developers to check the user permission, authentication and role membership status before showing UI components. Similar, using Java, developers can use code like shown below to verify the user authentication status: ADFContext adfContext = ADFContext.getCurrent(); SecurityContext securityCtx = adfContext.getSecurityContext(); boolean userAuthenticated = securityCtx.isAuthenticated(); Note that the Java code lines use the same security context reference that is used with expression language. But is this all that there is? No ! The goal of ADF Security is to enable all ADF developers to build secure web application with JAAS (Java Authentication and Authorization Service). For this, more fine grained protection can be defined using the ResourcePermission, a generic JAAS permission class owned by the Oracle Platform Security Services (OPSS).  Using the ResourcePermission  class, developers can grant permission to functional parts of an application that are not protected by page or task flow security. For example, an application menu allows creating and canceling product shipments to customers. However, only a specific user group - or application role, which is the better way to use ADF Security - is allowed to cancel a shipment. To enforce this rule, a permission is needed that can be used declaratively on the UI to hide a menu entry and programmatically in Java to check the user permission before the action is performed. Note that multiple lines of defense are what you should implement in your application development. Don't just rely on UI protection through hidden or disabled command options. To create menu protection permission for an ADF Security enable application, you choose Application | Secure | Resource Grants from the Oracle JDeveloper menu. The opened editor shows a visual representation of the jazn-data.xml file that is used at design time to define security policies and user identities for testing. An option in the Resource Grants section is to create a new Resource Type. A list of pre-defined types exists for you to create policy definitions for. Many of these pre-defined types use the ResourcePermission class. To create a custom Resource Type, for example to protect application menu functions, you click the green plus icon next to the Resource Type select list. The Create Resource Type editor that opens allows you to add a name for the resource type, a display name that is shown when granting resource permissions and a description. The ResourcePermission class name is already set. In the menu protection sample, you add the following information: Name: MenuProtection Display Name: Menu Protection Description: Permission to grant menu item permissions OK the dialog to close the resource permission creation. To create a resource policy that can be used to check user permissions at runtime, click the green plus icon in the Resources section of the Resource Grants section. In the Create Resource dialog, provide a name for the menu option you want to protect. To protect the cancel shipment menu option, create a resource with the following settings Resource Type: Menu Protection Name: Cancel Shipment Display Name: Cancel Shipment Description: Grant allows user to cancel customer good shipment   A new resource Cancel Shipmentis added to the Resources panel. Initially the resource is not granted to any user, enterprise or application role. To grant the resource, click the green plus icon in the Granted To section, select the Add Application Role option and choose one or more application roles in the opened dialog. Finally, you click the process action to define the policy. Note that permission can have multiple actions that you can grant individually to users and roles. The cancel shipment permission for example could have another action "view" defined to determine which user should see that this option exist and which users don't. To use the cancel shipment permission, select the disabled property on a command item, like af:commandMenuItem and click the arrow icon on the right. From the context menu, choose the Expression Builder entry. Expand the ADF Bindings | securityContext node and click the userGrantedResource option. Hint: You can expand the Description panel below the EL selection panel to see an example of how the grant should look like. The EL that is created needs to be manually edited to show as #{!securityContext.userGrantedResource[               'resourceName=Cancel Shipment;resourceType=MenuProtection;action=process']} OK the dialog so the permission checking EL is added as a value to the disabled property. Running the application and expanding the Shipment menu shows the Cancel Shipments menu item disabled for all users that don't have the custom menu protection resource permission granted. Note: Following the steps listed above, you create a JAAS permission and declaratively configure it for function security in an ADF application. Do you need to understand JAAS for this? No!  This is one of the benefits that you gain from using the ADF development framework. To implement multi lines of defense for your application, the action performed when clicking the enabled "Cancel Shipments" option should also check if the authenticated user is allowed to use process it. For this, code as shown below can be used in a managed bean public void onCancelShipment(ActionEvent actionEvent) {       SecurityContext securityCtx =       ADFContext.getCurrent().getSecurityContext();   //create instance of ResourcePermission(String type, String name,   //String action)   ResourcePermission resourcePermission =     new ResourcePermission("MenuProtection","Cancel Shipment",                            "process");        boolean userHasPermission =          securityCtx.hasPermission(resourcePermission);   if (userHasPermission){       //execute privileged logic here   } } Note: To learn more abput ADF Security, visit http://download.oracle.com/docs/cd/E17904_01/web.1111/b31974/adding_security.htm#BGBGJEAHNote: A monthly summary of OTN Harvest blog postings can be downloaded from ADF Code Corner. The monthly summary is a PDF document that contains supporting screen shots for some of the postings: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html

    Read the article

< Previous Page | 541 542 543 544 545 546 547 548 549 550 551 552  | Next Page >