Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 547/1206 | < Previous Page | 543 544 545 546 547 548 549 550 551 552 553 554  | Next Page >

• Mac Mini server (10.6) behind router with FQDN hostname

  - by thechriskelley

  I have a Mac Mini running Mac OS 10.6.6 Server that will be part of a local network, and a static IP from my ISP. I'd like to set up DNS for the Mini with a FQDN as the hostname (example.com) properly. The Mini is behind a router (Apple Airport Extreme) and is given a private, static IP address. I can't assign it the public static IP directly because it's behind a router with DHCP/NAT for other machines on the local net. My end goal here is for services to resolve to the server properly from outside and inside the local network to users via example.com (and subdomains like mail.example.com, www.example.com), which will point to the public static IP assigned to the router. Will DNS work/resolve properly (for mail services and other subdomains) if it has a private ip address, but the necessary services are forwarded properly through NAT? I'm open to any (hopefully better) suggestions, as my current setup doesn't seem like it's the best way. Currently, more hardware or another public static IP is not possible. With the current setup, it seems as though one static IP is not necessary anyway. Thanks in advance for any insight.

  Read the article

• Ripping CD Audio simultaneously from 2 drives on one PC via USB or PATA - rip accuracy preserved?

  - by Rob

  I'm considering ripping audio (reading audio) from CDs using 2 drives simultaneously to speed up the process of ripping the CDs - i.e. 2 at a time rather than 1. Are there any issues with achieving maximum rip accuracy? In general I wondered if people have tried this and if the simultaneous streams from both rip activities would overload the host machine and cause packet loss or read retries resulting in a sub-standard CD-DA Audio CD rip? If it just means the rip is slightly slower (but still faster than sequentially doing one rip followed by another) but still of maximum accuracy then that is OK for me. I will be using dbPowerAmp to rip the CDs and converting to FLAC lossless format. Specific examples: There are 2 machines I intend to do it on: A Toshiba NB100 1.6Ghz Atom netbook, 2Gb RAM, running Windows XP Home with 1 external LG DVD/CD burner and external 1 LG Blu-ray burner attached via USB 2.0, ripping to the machine's 5400rpm internal hard drive. This rips from one CD drive very well, more than adequate, it is a nippy, fast little machine for its specification. A Desktop PC running Windows 7 Home Premium with MSI P4M900M2-L/ MS-7255v2.0 motherboard and 1.86Ghz Intel Core 2 Duo E6320, 7200rpm hard drive and 2Gb RAM, with an internal LG PATA DVD/CD burner (master) and a Philips DVD/CD burner (slave) on the same PATA bus (perhaps separate buses would be another option to consider here). Thoughts?

  Read the article

• LTO 2 tape performance in LTO 3 drive

  - by hmallett

  I have a pile of LTO 2 tapes, and both an LTO 2 drive (HP Ultrium 460e), and an autoloader with an LTO 3 drive in (Tandberg T24 autoloader, with a HP drive). Performance of the LTO 2 tapes in the LTO 2 drive is adequate and consistent. HP L&TT tells me that the tapes can be read and written at 64 MB/s, which seems in line with the performance specifications of the drive. When I perform a backup (over the network) using Symantec Backup Exec, I get about 1700 MB/min backup and verify speeds, which is slower, but still adequate. Performance of the LTO 2 tapes in the LTO 3 drive in the autoloader is a different story. HP L&TT tells me that the tapes can be read at 82 MB/s and written at 49 MB/s, which seems unusual at the write speed drop, but not the end of the world. When I perform a backup (over the network) using Symantec Backup Exec though, I get about 331 MB/min backup speed and 205 MB/min verify speeds, which is not only much slower, but also much slower for reads than for writes. Notes: The comparison testing was done on the same server, SCSI card and SCSI cable, with the same backup data set and the same tape each time. The tape and drives are error-free (according to HP L&TT and Backup Exec). The SCSI card is a U160 card, which is not normally recommended for LTO 3, but we're not writing to LTO 3 tapes at LTO 3 speeds, and a U320 SCSI card is not available to me at the moment. As I'm scratching my head to determine the reason for the performance drop, my first question is: While LTO drives can write to the previous generation LTO tapes, does doing so normally incur a performance penalty?

  Read the article

• can't access SATA card config screen on boot, nor access the disks

  - by Ronald

  We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

  Read the article

• Symbolic directory link shared in domain

  - by Sabre

  We have a file server that is 2008R2 STD, it is a member server in a 2008 AD. I need to relocate some of the files and directories and would like to do it behind the scenes more or less without impacting the users. (Reason for this is that some of the files, due to recent software changes, HAVE to be located locally on one of the workstations, but they can be accessed by other applications remotely.) So symbolic links seem the panacea here, I moved a directory to another network share in the same domain (Windows 7 professional), created a symlink to it in the location it used to be in, named it the same thing, and to the local user it seems almost transparent. I.E. When logged into the desktop of the file server, I can go to the directory, open the link, it leaps to the other share as if it were local, exactly what would be expected. Then I tried it from another client computer (Windows 7 professional as well), went through the normal provisioning of R2R and L2R with fsutil... No joy. What I am getting is an access denied "Logon failure: Unknown username or bad password." using the same account that I log on locally to the file server with (Which happens to be the domain admin) So I cannot believe it is telling the truth, or... I assume it is not passing the credentials I am connecting to the first share all the way through the symlink. The end result is I want users on the domain to browser to share A, inside share A is a mixture of directories/files that reside there, and symlinks to directories/files on the second machine over the network in the same domain. Possible? Or am I misunderstanding how the symlink should work?

  Read the article

• Joining Samba to Active Directory with local user authentication

  - by Ansel Pol

  I apologise that this is somewhat incoherent, but hopefully someone will be able to make enough sense of this to understand what I'm trying to achieve and provide pointers. I have a machine with two network interfaces connected to two different networks (one of which it's providing several other services for, such as DNS), running two separate instances of Samba, one bound to each interface. One of the instances is just a workgroup-style setup using share-level authentication, which is all working fine. The problem is that I'm looking to join the other instance to an MS Active Directory domain (provided by MS Windows Small Business Server 2003) to enable a subset of the domain users to access the shares from Windows machines on the other network. The users who need access from the domain environment have accounts (whose names are all-lowercase versions of their domain usernames) on the machine running Samba, but I'm not sure about how to map the UIDs and everything I've read concerns authenticating accounts on that machine against either AD or another LDAP server. To clarify: I only want the credentials for AD users accessing the non-workgroup Samba instance to be authenticated against AD, not the accounts on the machine running Samba. I hope this is sufficiently clear. EDIT: In addition to being able to access the Samba shares from AD, I do also need to be able to access a share on the domain from the machine running Samba but would still like everything non-Samba-related to authenticate locally.

  Read the article

• Domain authentication over OPEN wireless pre-logon (Windows 7 Pro) - No logon servers avail

  - by Shadow00Caster

  I have a plethora of laptops that are joined to an AD domain. I have an enterprise wireless system setup, the users of these laptops will be using an OPEN unsecured SSID which will ultimately have a captive portal that uses Radius-AD auth and firewall rules to allow access pre-captive portal auth to the proper ip's/ports of DC's etc for auth etc. I already have other laptops/users connecting to another SSID with 802.11x and SSO, all works perfectly pre-logon etc. My problem is with this open network, for some reason I cannot get the machines to auth to AD. The laptops connect to the wireless network, I confirm this on the controller and can ping the laptop at startup. I sharked the wires on the 2 DC's that these machines auth to, I can see a DNS SOA update from a laptop im testing with and can ping that test laptop from both DC's. When I try to logon, "There are currently no logon servers available to service the logon request." The shark shows no incoming connections to either DC even though the laptop is connected and pingable. Any help is greatly appreciated.

  Read the article

• Why do I get this message from chrome when navigating to https://www.amazon.com?

  - by Denis

  This is probably not the site you are looking for! You attempted to reach www.amazon.com, but instead you actually reached a server identifying itself as *.voxcdn.com. This may be caused by a misconfiguration on the server or by something more serious. An attacker on your network could be trying to get you to visit a fake (and potentially harmful) version of www.amazon.com. Intermittently, I get a blank page when going to http://www.amazon.com. So I stuck an 's' in the URL, making it https://www.amazon.com and got that message above (with the nice red screen) from Chrome indicating there might be some monkey business going on. After hammering on the URL a bunch of times and pulling it up in Chrome's developer tool to look at the network traffic on it, the url (without the s) started behaving. The url with the s just hangs, but the red screen no longer comes up. Some specs... I've got a macBook Pro, Snow Leopard, Time Warner cable. I've had enough strange stuff happening over the past couple months (google.com, youtube.com, amazon.com not coming up or loading strange error messages with random reference numbers) that I finally decided to switch to OpenDNS. Still having problems, though.

  Read the article

• Poor gaming performance with hyper-v installed in windows 8

  - by SnowCrash

  I am getting very poor gaming performance on my Windows 8 host OS with Hyper-V installed but no guest machines running. For example World of Tanks reports 60-70 FPS without Hyper-V installed and 4-14 FPS with it installed. A similar, dramatic, hit is observed in several other games so the issue is not WoT specific. To make the point clear, I am not trying to run games in a virtual machine. I don't even have a VM running while observing this effect. I simply have the Hyper-V feature installed. My system specs: AMD Phenom II 965 (3.4 GHz) AMD Radeon 6950 2GB (XFX Double D HD-695X-CDFC) 16GB DDR3 1333 AMD 790GX chipset Mainboard (Gigabyte GA-MA790GPT-UD3H) I have tried every AMD driver from 12.8 to the current 12.11beta8, virtualization is enabled in the BIOS settings, the onboard 3300HD video device is disabled in BIOS and I have read the MSDN blog entry here regarding a similar issue in Server 2008 that was resolved in 2008 R2 (and hopefully not regressed in Win 8). I'd like to be able to use Hyper-V for development and testing at home (I am a sysadmin/software developer professionally). If, however, I can't also use my home system for entertainment I'll have to scrap those plans.

  Read the article

• Ubuntu : apt-get command error

  - by Wibowo Margito

  I work with Ubuntu 10.04 everyday. Several days ago, when I release command sudo apt-get install .... it run very good, no error. I also able to open websites with my browser with no proxy. But, today, I got error. Every time I release the command, the connection redirected to an IP in my local network. I can see it in the terminal window. Several days ago I tried to connect to the internet throught the IP, by SSH tunneling. But I forget what I have done and there is no way home. This is the output in terminal : deo@deo-laptop:~$ sudo apt-get update [sudo] password for deo: Err http://cx.archive.ubuntu.com lucid Release.gpg [ Could not connect to 10.7.7.15:3128 (10.7.7.15). - connect (110: Connection timed out) Err http://cx.archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Unable to connect to 10.7.7.15:3128: 10.7.7.15 is an adress in my local network. Somebody please help me :)

  Read the article

• Managing Apache to Compensate for WebDAV's Security Masking

  - by Tohuw

  When a user creates a file via WebDAV, the default behavior is that the file is owned by the user and group running the Apache process, with a umask of 022. Unfortunately, this makes it impossible for unprivileged users to write to the files by other means without being a member of the group Apache runs under (which strikes me as a particularly bad idea). My current solution is to set umask 000 in Apache's envvars and remove all world permissions from the webdav parent directory for the user. So, if the WebDAV share is /home/foo/www, then /home/foo/www is owned by www-data:foo with permissions of 770. This keeps other unprivileged users out, more or less, but it's hokey at best and a security disaster awaiting at worst. From my research and poking around at mod_dav and Apache, I cannot find a reasonable solution short of a cron job flipping all the permissions back (I'd rather not have the load and increased complexity on the server). SuExec won't work, either, because WebDAV operations are not going to execute as a different user. Any thoughts on this? Thank you.

  Read the article

• how to uninstall ubuntu 8 from ubuntu 10 dual boot

  - by umar

  I have ubuntu 8.04 and ubuntu 10.04 on my laptop, and i want to reclaim all the ubuntu 8 space so that i have just one operating system on my laptop. how can i do it? the output of sudo fdisk -l is as follows: sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31a431a3 Device Boot Start End Blocks Id System /dev/sda1 * 1 4959 39833136 83 Linux /dev/sda2 4960 5233 2200905 82 Linux swap / Solaris /dev/sda3 5234 12852 61192552 83 Linux /dev/sda4 12852 19458 53062657 5 Extended /dev/sda5 12852 19182 50847744 83 Linux /dev/sda6 19182 19458 2213888 82 Linux swap / Solaris i dont know which of sda1, ..., sda 6 etc ubuntu 8 is on. how can i find that out? The actual task is that i think a lot of space is devoted to ubuntu 8, if there is no easy way to get rid of it, then i want to repartition the disk so that about 50 GB of hard disk space is given to ubuntu 10's home folder from the ubuntu 8's home folder. but i hope that there is an easy way to get rid of ubuntu 8 alrogether and just have ubuntu 10 on my system.

  Read the article

• cannot connect to sql server express from sql server standard

  - by Jackson Sunuwar

  ... like my title says... I cannot connect to my instance on sql server express from sql server standard... I have tried disabling firing wall and checked sqlbrowser is started but for some reason I cannnot connect to my datbase... called server_name\sqlexpress.. I have a virtual machine and a full scale MS SQL Server 2008 R2 running on it... and I have several other vm running sqlexpress. they run fine and I can connect to them using sqlexpress... but when i try to access from sqlserver... I get this error. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) Digging deep into the error, I found this Error Number: -1 Severity: 20 State: 0 and finally this... Program Location: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server) at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser() Firewall is turned off on the VM that's running mssqlserver... I turned of firewall on one of the vm that's running the sqlexpress but I still get the error... can someone please help... thank you

  Read the article

• How to avoid Windows Genuine Advantage for an XP update?

  - by hlovdal

  I am about to apply updates to a windows xp installation I have not booted in a couple of years. When going to update.microsoft.com, it forced me first to accept an activex installation and now it wants me to install wga: Windows Update To use this latest version of Windows Update, you will need to upgrade some of its components. This version provides you with the following enhancements to our service: <... useless list of "advantages" ... Details Windows Genuine Advantage Validation Tool (KB892130) 1.1 MB , less than 1 minute The Windows Genuine Advantage Validation Tool enables you to verify that your copy of Microsoft Windows is genuine. The tool validates your Windows installation by checking Windows Product Identification and Product Activation status. Update for Windows XP (KB898461) 477 KB , less than 1 minute This update installs a permanent copy of Package Installer for Windows to enable software updates to have a significantly smaller download size. The Package Installer facilitates the install of software updates for Microsoft Windows operating systems and other Microsoft products. After you install this update, you may have to restart your system. Total: 1.5 MB , less than 1 minute I have heard nothing but bad things about wga, and I absolutely do not want it installed on my system (this answer seems to give some options). Searching for "windows xp" at microsoft's web pages brought up this page which says Windows XP Service Pack 3 Network Installation Package for IT Professionals and Developers Brief Description This installation package is intended for IT professionals and developers downloading and installing on multiple computers on a network. If you're updating just one computer, please visit Windows Update at http://update.microsoft.com . ... File Name: WindowsXP-KB936929-SP3-x86-ENU.exe I am currently downloading this file. Will installing this bring my installation up to date with security updates? What about later updates whenever a new problem is discovered, how can i update without using wga?

  Read the article

• Error with procmail script to use Maildir format

  - by bradlis7

  I have this code in /etc/procmailrc: DROPPRIVS=yes DEFAULT=$HOME/Maildir/ :0 * ? /usr/bin/test -d $DEFAULT || /bin/mkdir $DEFAULT { } :0 E { # Bail out if directory could not be created EXITCODE=127 HOST=bail.out } MAILDIR=$HOME/Maildir/ But, when the directory already exists, sometimes it will send a return email with this error: 554 5.3.0 unknown mailer error 127. The email still gets delivered, mind you, but it sends back an error code to the sending user as well. I fixed this temporarily by commenting out the EXITCODE and HOST lines, but I'd like to know if there is a better solution. I found this block of code in multiple places across the net, but couldn't really find why this error was coming back to me. It seems to happen when I send an email to a local user. Sometimes the user has a .forward file to send it on to other users, sometimes not, but the result has been the same. I also tried removing DROPPRIVS, just in case it was messing up the forwarding, but it did not seem to affect it. Is the line starting with * ? /usr/bin/test a problem? The * signifies a regex, but the ? makes it return an integer value, correct? What is the integer being matched against? Or is it just comparing the integer return value? Do I need a space between the two blocks? Thanks for the help.

  Read the article

• How do I apply multiple subnets to a server with one NIC?

  - by Cosban

  I am trying to route multiple IPs through one physical NIC on my dedicated server for use with Proxmox KVM VMs. I have a dedicated server which is currently running Debian 4.4.5-8 with 3 available ip addresses for use, which will be displayed as 176.xxx.xxx.196 (main), 176.xxx.xxx.198 (on same subnet as main) and 5.xxx.xxx.166 (different subnet). I am currently trying to route the third IP address with the dedi for use with a vps that I have set up using proxmox v2.x but am having a really, really hard time doing so. Virtual interfaces binding the additional IP addresses work as expected, ruling out external routing problems. The provider has given the following information for the IP addresses on the main subnet: gateway: 176.xxx.xxx.193 netmask: 255.255.255.224 broadcast: 176.xxx.xxx.223 As well as the following information for the IP address on the second subnet: gateway: 5.xxx.xxx.161 netmask: 255.255.255.248 broadcast: 5.xxx.xxx.167 Everything I've tried with /etc/network/interfaces has either not worked, or has rendered the network completely useless. This is the current state of the file, which has the secondary IP address working on the same subnet as well as IPv6 working, but not the second subnet. # Nativen IPv6 Schnittstelle iface eth0 inet6 manual # Bridge IPv4 Schnittstelle (176.xxx.xxx.193/27) auto vmbr0 iface vmbr0 inet static address 176.xxx.xxx.196 netmask 255.255.255.224 gateway 176.xxx.xxx.193 broadcast 176.xxx.xxx.223 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 176.xxx.xxx.198/27 dev vmbr0 auto vmbr1 iface vmbr1 inet static address 5.xxx.xxx.166 netmask 255.255.255.248 gateway 5.xxx.xxx.161 broadcast 5.xxx.xxx.167 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 post-up ip addr add 5.xxx.xxx.166/27 dev vmbr1 # Bridge IPv6 Schnittstelle (Reichweite: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx::/64) iface vmbr0 inet6 static address xxxx:xxxx:xxxx:xxxx:xxxx:xxxx netmask 64 up ip -6 route add xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 up ip -6 route add default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0 down ip -6 route del default via xxxx:xxxx:xxxx:xxxx:xxxx:xxxx dev vmbr0

  Read the article

• high virtual memory usage in openvz?

  - by freedrull

  We're having a lot of memory problems on a new OpenVZ box. It is supposed to have 1 gig of memory, I'm not sure how much of that is burstable or guaranteed memory. Programs in general seem to take up more virtual memory than they do on my box at home, and on our other OpenVZ box. I wrote this simple C program: #include <stdio.h> #include <stdlib.h> int main(){ char *thingy = malloc(500); getchar(): return 0; } So it simply allocates 500 bytes and then returns. I ran the program on 3 computers. On my home machine, and our other OpenVZ box it shows about 1k bytes of virtual memory being used. On the new problematic machine its about 3k. I know this is just virtual memory and not resident memory, but why is this machine allocating so much virtual memory? Are there some settings I need to adjust to the OpenVZ memory settings? I tried changing the stack size with ulimit -s 256 and restarting some demons, but I still saw the same results. I'm doing all of my monitoring with htop, is this even a good program to use with a OpenVZ vps? I've read I should be parsing the output of /proc/user_beancounters intead or something.

  Read the article

• I can't download or stream for more then 3 sec, and then the conection activity just dies

  - by JMHein

  Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

  Read the article

• What is optimal hardware configuration for heavy load LAMP application

  - by Piotr K.

  I need to run Linux-Apache-PHP-MySQL application (Moodle e-learning platform) for a large number of concurrent users - I am aiming 5000 users. By concurrent I mean that 5000 people should be able to work with the application at the same time. "Work" means not only do database reads but writes as well. The application is not very typical, since it is doing a lot of inserts/updates on the database, so caching techniques are not helping to much. We are using InnoDB storage engine. In addition application is not written with performance in mind. For instance one Apache thread usually occupies about 30-50 MB of RAM. I would be greatful for information what hardware is needed to build scalable configuration that is able to handle this kind of load. We are using right now two HP DLG 380 with two 4 core processors which are able to handle much lower load (typically 300-500 concurrent users). Is it reasonable to invest in this kind of boxes and build cluster using them or is it better to go with some more high-end hardware? I am particularly curious how many and how powerful servers are needed (number of processors/cores, size of RAM) what network equipment should be used (what kind of switches, network cards) any other hardware, like particular disc storage solutions, etc, that are needed Another thing is how to put together everything, that is what is the most optimal architecture. Clustering with MySQL is rather hard (people are complaining about MySQL Cluster, even here on Stackoverflow).

  Read the article

• SQL Server 2008 Remote Access

  - by Timothy Strimple

  I'm having problems connecting to my SQL Server 2008 database from my computer. I have enabled remote connections as described in this answer (http://serverfault.com/questions/7798/how-to-enable-remote-connections-for-sql-server-2008). And I have added the ports listed on the microsoft support page to our Cisco Asa firewall and I'm still unable to connect. The error I'm getting from the SQL Management Studio is: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060) Once again, I have double and triple checked that remote connections are enabled under the database properties and that TCP is enabled on the configuration page. I've added tcp ports 135, 1433, 1434, 2382, 2383, and 4022 as well as udp 1434 to the firewall. I've also checked to make sure that 1433 is the static port that is set in the tcp section of the database server configuration. The ports should be configured correctly in the firewall since http/https and rdp are all working and the sql server ports are setup the same way. What am I missing here? Any help you could offer would be greatly appreciated. Edit: I can connect to the server via TCP on the internal network. The servers are colocated in a datacenter and I can connect from my production box to my development box and vice versa. To me that indicates a firewall issue, but I've no idea what else to open. I've even tried allowing all tcp ports to that server without success.

  Read the article

• How to prevent nginx from locking files on mounted samba partition in Centos 6

  - by Bruce Kirkpatrick

  I'm using nginx 1.3.8 inside a centos 6.3 virtualbox 4.2.4 virtual machine. The system is running the latest software available via yum update. The host OS is windows 7. The site files nginx is serving are on mounted samba partition, which is a folder on the host Windows system. I.e., inside linux, nginx paths are referring to /home/vhosts and this is mounted from D:\vhosts\ on windows. The samba partition is mounted as root with 777 privileges. /etc/fstab looks like this, but with real ip, username, password: //hostip/vhosts /home/vhosts cifs username=username,password=SECRETPASSWORD,uid=root,gid=root,file_mode=0777,dir_mode=0777,rw,_netdev 0 0 I.e. linux/nginx reads from the windows share, and not the opposite. in /etc/samba/smb.conf, I have tried to disable all samba locking features, but it seems to have no effect even after rebooting the virtual machine. locking=no share modes=no oplocks = no level2 oplocks = no kernel oplocks =no I'm receiving "Access is denied" errors in Windows or linux when attempting to overwrite the javascript file in windows that has been accessed at least once with nginx. If I run "service nginx reload", the lock is removed and I'm able to save the file. That's why I think it is nginx causing the lock. The same problem occurs with directories. However, that may be a different issue not related to the use of samba. I'm using samba so that I can manage the source code outside of the virtual machine. Also note that after I run "service nginx reload", the file I'm editing is actually automatically deleted from the windows host. SOLVED: I just reviewed my nginx.conf file. It appears the "open_file_cache" feature is what is causing the lock and deleted files. When I set this option to open_file_cache off;, My problem is resolved. I will repost as the answer when it allows me to do so.

  Read the article

• Is there a reason to use internal DNS over 8.8.8.8 ?

  - by skylarking

  I've inherited a LAN where there is really no name resolution being done for local resources... i.e. all users enter IP addresses manually to access printers and network shares. There are no LDAP servers or domains either....workstations simply connect to the network without authentication. DHCP is handled via a core switch... And DNS settings are also handed out by this same core switch. Currently, the DNS assignments are as such, and in this order: 10.1.1.50 / old Pentium III Windows 2003 box running DNS service- 128 MB RAM 169.200.x.x / ISP 4.2.2.2. / the well known public one There a couple thousand clients on the LAN....and most of the activity is web browsing ( this is an educational setting ). First of all, the server seems woefully underpowered for this task...yet there is virtually no slowness when web surfing by clients.... How much horsepower should a heavily used DNS server have ? I have also heard using 4.2.2.2 is a bad idea .... since it has been so overused... Finally, wouldn't it make sense to have a robust external DNS server listed first? ( Google's 8.8.8.8 would seem to be a logical candidate )

  Read the article

• Samba between Ubuntu server 10.10 and Windows Vista, Windows 7

  - by chepukha

  Hi all, I have a linux box running Linux server ubuntu 10.10. I have installed Samba on this linux box and want to share files with my laptops which run Windows Vista home and Windows 7 home. I have been struggling with the setup for almost a month but couldn't get it right. If I try to access share folder from Windows Vista, I get message "Windows cannot access \\server_ip_address". Error code: 0x80070035. The network path was not found. If I access from Windows 7, then after entering password to login I can see the list of share folders on Linux box. But if I click on a share folder, I get the same error message as above. Tail /var/log/samba/log.windows7-pc I got the following message: [2011/03/16 00:17:41.427238, 0] smbd/service.c:988(make_connection_snum) canonicalize_connect_path failed for service sharemedia, path /root/sharemedia Here is my setting in smb.conf [global] share modes = yes netbios name = Samba workgroup = WORKGROUP wins support = yes encrypt passwords = true [sharemedia] comment = Tesing sharing using Samba path=/root/sharemedia/ public = yes valid users = samba_usr_name ; make sure all files are sensible permissions create mask = 0660 force create mask = 0660 directory mask = 2770 force directory mask = 2770 directory security mask = 0000 ; Normal share parameters read only = no browseable = yes writable = yes guest ok = no

  Read the article

• Googlebot repeatedly looks for files that aren't on my server

  - by John at CashCommons

  I'm hosting a site for a volunteer organization. I've moved the site to WordPress, but it wasn't always that way. I suspect at one point it was hacked badly. My Apache error log file has grown to 122 kB in just the past 18 hours. The large majority of the errors logged are of this form -- it's repeated hundreds of times today alone in my log files: [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/calendar.php [Mon Nov 12 18:29:27 2012] [error] [client xx.xxx.xx.xxx] File does not exist: /home/*******/public_html/*******.org/404.shtml (I verified that xx.xxx.xx.xxx was a Google server.) I suspect there was a security hole somewhere before, likely in calendar.php, that was exploited. The files don't exist anymore, but there may be many backlinks that exist that reference here, hence why googlebot is so interested in crawling them. How do I fix this gracefully? I still would like Google to index the site. I just want to tell it somehow not to look for these files anymore.

  Read the article

• How to connect to local instance of SQL Server 2008 Express

  - by Billy Logan

  I just installed SQL Server 2008 Express on my windows 7 machine. I previously had 2005 on here and used it just fine with the old SQL Server Management Studio Express. I was able to connect with no problems to my PC-NAME\SQLEXPRESS instance. I uninstalled 2005 and SQL Server Management Studio Express. I then installed SQL Server 2008 Express on my machine and elected to have it install SQL Server Management Studio. Now, when I try to connect to PC-NAME\SQLEXPRESS (with Windows Authentication, like I always did), I get the following message: Cannot connect to PC-NAME\SQLEXPRESS. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476 When I went to the help link it mentions, the help page suggests the following: * Make sure that the SQL Server Browser service is started on the server. * Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. I did try starting the SQL Server Browser, but don't see that the Surface Area Configuration is installed with this express version. I had seen another user with an almost exact same issue that was missing the database engine on install. If that were the case how could i test for that and where would i go to download that install. Thanks in advance, Billy

  Read the article

< Previous Page | 543 544 545 546 547 548 549 550 551 552 553 554  | Next Page >