Search Results

Search found 41573 results on 1663 pages for 'change management'.

Page 550/1663 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• Installing 13.04 on an EFI partition - Share with Windows 8?

  - by mengelkoch

  Information I've found here suggests that for my system, I need to install 13.04 into an EFI-type partition, since it needs to boot as UEFI. I also understand it is advisable to have only ONE EFI partition on the disk; I've read here that it is OK for Ubuntu and Windows to share the same partition (please confirm). When I try to install into the existing EFI drive, I get the message "No root file system is defined. Please correct from partitioning menu." Do I change the EFI boot partition to another type? Doesn't that defeat the purpose? If I change it to Ext4 Journaling File System, I am given the opportunity to define the '/' Mount point. I haven't proceeded beyond this point for fear I am going to destroy Windows 8 by altering this partition. BTW, I created three partitions in Windows before installing, per the helpful response to my previous question. But if I try to install into the partition I created for Ubuntu, I get the "No root file system..." error again.

  Read the article

• Designs for outputting to a spreadsheet

  - by Austin Moore

  I'm working on a project where we are tasked to gather and output various data to a spreadsheet. We are having tons of problems with the file that holds the code to write the spreadsheet. The cell that the data belongs to is hardcoded, so anytime you need to add anything to the middle of the spreadsheet, you have to increment the location for all the fields after that in the code. There are random blank rows, to add padding between sections, and subsections within the sections, so there's no real pattern that we can replicate. Essentially, anytime we have to add or change anything to the spreadsheet it requires a many long and tedious hours. The code is all in this one large file, hacked together overtime in Perl. I've come up with a few OO solutions, but I'm not too familiar with OO programming in Perl and all my attempts at it haven't been great, so I've shied away from it so far. I've suggested we handle this section of the program with a more OO friendly language, but we can't apparently. I've also suggested that we scrap the entire spreadsheet idea, and just move to a webpage, but we can't do that either. We've been working on this project for a few months, and every time we have to change that file, we all dread it. I'm thinking it's time to start some refactoring. However, I don't even know what could make this file easier to work with. The way the output is formatted makes it so that it has to be somewhat hardcoded. I'm wondering if anyone has insight on any design patterns or techniques they have used to tackle a similar problem. I'm open to any ideas. Perl specific answers are welcome, but I am also interested in language-agnostic solutions.

  Read the article

• Releasing software/Using Continuous Integration - What do most companies seem to use?

  - by Sagar

  I've set up our continuous integration system, and it has been working for about a year now. We have finally reached a point where we want to do releases using the same. Before our CI system, the process(es) that was used was: (Develop) -> Ready for release -> Create a branch -> (Build -> Fix bugs as QA finds them) Loop -> Final build -> Tag (Develop) -> Ready for release -> (build -> fix bugs) Loop -> Tag Our CI setup: 1 server for development (DEV) 1 server for qa/release (QA) The second one has integrated into CI perfectly. I create a branch when the software is ready for release, and the branch never changes thereafter, which means the build is reproduceable without having to change the CI job. Any future development takes place on HEAD, and even maintainence releases get a completely new branch and a completely new job, which remains on the CI system forever, and then some. The first method is harder to adapt. If the branch changes, the build is not reproduceable unless I use the tag to build [jobs on the CI server uses the branch for QA/RELEASE, and HEAD for development builds]. However, if I use the tag to build, I have to create a new CI job to build from the tag (lose changelog on server), or change the existing job (lose original job configuration). I know this sounds complicated, and if required, I will rewrite/edit to explain the situation better. However, my question: [If at all] what process does your company use to release software using continuous integration systems. Is it even done using the CI system, or manually?

  Read the article

• How do you track existing requirements over time?

  - by CaptainAwesomePants

  I'm a software engineer working on a complex, ongoing website. It has a lot of moving parts and a small team of UI designers and business folks adding new features and tweaking old ones. Over the last year or so, we've added hundreds of interesting little edge cases. Planning, implementing, and testing them is not a problem. The problem comes later, when we want to refactor or add another new feature. Nobody remembers half of the old features and edge cases from a year ago. When we want to add a new change, we notice that code does all sorts of things in there, and we're not entirely sure which things are intentional requirements and which are meaningless side effects. Did someone last year request that the login token was supposed to only be valid for 30 minutes, or did some programmers just pick a sensible default? Can we change it? Back when the product was first envisioned, we created some documentation describing how the site worked. Since then we created a few additional documents describing new features, but nobody ever goes back and updates those documents when new features are requested, so the only authoritative documentation is the code itself. But the code provides no justification, no reason for its actions: only the how, never the why. What do other long-running teams do to keep track of what the requirements were and why?

  Read the article

• Wordpress blog penalized by Google search - what's wrong?

  - by pawelbrodzinski

  I have a blog (http://blog.brodzinski.com), which is wordpress.org blog with pretty popular Thesis theme with almost no other customizations. Some time ago it was penalized by Google search - it simply stopped appearing in search results even for search terms it used to be top result, like my name - Pawel Brodzinski - which isn't anything close to popular search term. To be exact the site has been penalized on Nov 18. It started popping up in search result on Dec 23 but only for a few days. Since Dec 27 it is out again. I know Google guidelines and I'm not aware to break any of them. I submitted reconsideration request after I noticed penalty. It was proceeded and there was no change whatsoever (no surprise as it seems the site was penalized again). I checked diagnostics in webmaster tools and neither any malware was detected nor any strange search terms popped up. I read related threads on Google webmasters forum but found none of solutions working for me. I posted a thread on Google webmasters forum (http://www.google.com/support/forum/p/Webmasters/thread?tid=546339f49d4a03bc&hl=en) and the only answer I got was to check for duplicate content. Well, there is some duplicate content published on the web but it is true for vast majority of blogs and it doesn't seem to be a reason for a penalty. Also before Dec 27 I was able to remove duplicate content from a couple of sites which were republishing my feed but this doesn't change the situation - the site was penalized again. The problem is I have no idea what can be wrong with the website or how to find it out. To make the problem worse I'm no webmaster, I just run a wordpress blog, which supposed to be easy.

  Read the article

• 2D Smooth Turning in a Tile-Based Game

  - by ApoorvaJ

  I am working on a 2D top-view grid-based game. A ball that rolls on the grid made up of different tiles. The tiles interact with the ball in a variety of ways. I am having difficulty cleanly implementing the turning tile. The image below represents a single tile in the grid, which turns the ball by a right angle. If the ball rolls in from the bottom, it smoothly changes direction and rolls to the right. If it rolls in from the right, it is turned smoothly to the bottom. If the ball rolls in from top or left, its trajectory remains unchanged by the tile. The tile shouldn't change the magnitude of the velocity of the ball - only change its direction. The ball has Velocity and Position vectors, and the tile has Position and Dimension vectors. I have already implemented this, but the code is messy and buggy. What is an elegant way to achieve this, preferably by modification of the ball's Velocity vector by a formula?

  Read the article

• How To Export/Import a Website in IIS 7.x

  - by Tray Harrison

  IIS 6 had a great feature called ‘Save Configuration to a File’ which would allow you to easily export a website’s configuration, to be later used to import either on the same server or another box.  This came in handy anytime you wanted to duplicate a site in order to do some testing without impacting the existing application.  So naturally, Microsoft decided to do away with this feature in IIS 7. The process to export/import a site is still fairly simple, though not as obvious as it was in previous versions.  Here are the steps: 1. Open a command prompt and navigate to C:\Windows\System32\inetsrv and run the following command: appcmd list site /name:<sitename> /config /xml > C:\output.xml So if you were wanting to export a website named EAC, you would run the following: If you’ll be setting up another copy of the site on the same server, you’ll now need to edit the output.xml file before importing it.  This is necessary in order to avoid conflicts such as bindings, Site ID, etc.  To do this, edit the XML and change the values.  Go ahead and make a copy of the home directory, and rename it to whatever folder name you specified in the output – /EAC2 in this example.  If you decide to change the app pool, make sure you go ahead and create the new app pool as well. Once these edits have been made, we are now ready to import the site.  To do that run: appcmd add sites /in < c:\output.xml So for our example it would look like this: That’s it.  You should now see your site listed when opening up Inet Manager.  If for some reason the site fails to start, that’s probably because you forgot to create the new app pool or there is a problem with one of the other parameters you changed.  Look at the System log to identify any issues like this.

  Read the article

• Ubuntu 13.10 Unity doesn't load after upgrade

  - by William

  Just upgraded to Ubuntu 13.10 only to find that Unity won't load (login freezes, after doing ctrl+alt+F1, logging in and then doing startx, I get a blank desktop and the mouse pointer, and nothing else). I can right click, but the only operations that work are "create new file" and "create new folder". For example, "change desktop background" doesn't work. Also, after doing a few right clicks and choosing "change desktop background", I get a warning message box: "compiz closed unexpectedly." Guest login works fine. Tried creating a new user, but I experience the same thing with the new user. Tried removing all configuration files from my home directory... same thing. Doing dconf reset -f /org/compiz/ gives an error "error spawning command line..." Doing unity --reset also gives errors. Tried uninstalling unity (and compiz) and reinstalling, but that doesn't help. Tried reconfiguring lightdm, didn't help. I don't have any proprietary drivers installed. Once again, the funny thing is that the guest session works fine.

  Read the article

• How do you maintain focus when a particular aspect of programming takes 10+ seconds to complete?

  - by Jer

  I have a very difficult time focusing on what I'm doing (programming-wise) when something (compilation, startup time, etc.) takes more than just a few seconds. Anecdotally it seems that threshold is about 10 seconds (and I recall reading about study that said the same thing, though I can't find it now). So what typically happens is I make a change and then run the program to test it. That takes about 30 seconds, so I start reading something else, and before I know it 20 minutes have passed, and then it takes (if I'm lucky!) another 10+ minutes to deal with the context switch to getting back into programming. It's not an exaggeration to say that some things that should take me minutes literally take hours to complete. I'm very curious about what other programmers do to combat this tendency (or if I'm unique and they don't have this tendency?). Suggestions of any type at all are welcome - anything from "sit on your hands after hitting the compile button", to mental tricks, to "if it takes 30 seconds to start up something to test a change, then something's wrong with your development process!"

  Read the article

• Only one user can connect to Ubuntu samba server

  - by StaticMethod

  I setup a samba server on 12.04 LTS, and it works great for one user but not the others. I am trying to map a network drive from a windows 7 laptop. I can successfully authenticate with one user, but the other two both get "Access is denied" errors. Here is my smb.conf file. [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [share] comment = Ubuntu File Server Share path = /srv/share read only = No create mask = 0755 I know that the service is successfully reading from the /etc/passwd file because if I change the Linux password for the user that works, I have to use the new password when I connect. I changed all the users so they are all members of the same groups (all three users are admins anyway). I only ever have one user connected at a time. Here are the permissions on the shared folder /srv$ ls -l drwxrwxrwx 1 nobody nogroup 16 Feb 22 17:05 share Any ideas?

  Read the article

• Read Oracle Certification Program's December 2012 E-Magazine now!

  - by Harold Green

  Hello Everyone, The big news in this edition of our Oracle Certification E-Magazine is related to a change in the way that exam results are provided at the end of the test (using our CertView tool). This significant process change for the Oracle program sets the stage for tighter integration of candidate information and exam/certifcation results. Additionally, it helps give every certification holder access to important tools available in CertView. The new process was implemented in November and so far it is going very well. Much of the success of this new initiative is due to you (following the new process)! We are continuing to work to expand the functionality of CertView to better help you use your certification as a tool to help improve your career. Also in this issue of the E-Magazine, we are announcing several new offerings. We have a new SQL Tuning certification as well as a new Exam Preparation Seminar. We have continued to release new Exam Preparation Seminars and Exam Preparation Seminar Value Packages and we are receiving good feedback. We hope that you will consider employing one of these seminars to help you prepare for your next certification exam. They are now even available on iPad! READ THE DECEMBER 2012 EDITION HERE Thank you and good luck! Paul Sorensen Sr. Director, Global Certification Programs

  Read the article

• C# find a value from an object column using a string from another column

  - by Graham

  I have 2 list in foreach loops.. I currently use a 'switch' statement on the m.columnname and then assign the value of that column to another var map as per below.. If m.columnname = 'DocHeading' then v.docheading is assigned to map.value.. There will always be a match on m.columnname to a column in the var v. is there a way to get the value from the var v using the string from m.columnname? The reason is that the users will want to add and change column names and I dont want to have to change this code all the time.. Hope this makes sense List spreadMapping = new List(); foreach (var m in mappings) { foreach (var v in hvalues) { SpreadMappings map = new SpreadMappings(); switch (m.ColumnName) { case “DocHeading”: map.ColumnX = m.ColumnX; map.ColumnY = m.ColumnY; map.ColumnValue = v.DocHeading; map.ColumnName = m.ColumnName; map.ColumnId = v.Id; map.ColumnSheetName = sheetName; spreadMapping.Add(map); break;

  Read the article

• Including Microsoft.XNA.Framework.Input.Touch in a project?

  - by steven_desu

  So after running through tutorials by both Microsoft and www.xnadevelopment.com I feel very confident in my ability to get to work on my first game using the XNA Framework. I've manipulated sprites, added audio, changed game states, and even went a step further to apply the knowledge I had and figure out how to make animations and basic 2-dimensional physics (including impulses, force, acceleration, and speed calculations) But then shortly into the project I hit a curious bump that I've been unable to figure out. In wanting to implement menus, pause screens, and several different aspects of play (a "pre-level" prep screen, the level itself, and a screen after the level to review how well you did) I took a look at Microsoft's Game State Management sample. I understood the concept, although it was admittedly quite a lot to take in. Not wanting to recreate the entire concept by scratch (after all- what purpose would that serve?) I tried copying and pasting the sample code into my own ScreenManager class (as well as InputState and GameScreen classes) to try and borrow their ingenuity. When I did this, however, my project stopped compiling. I was getting the following error: The type or namespace name 'Touch' does not exist in the namespace 'Microsoft.Xna.Framework.Input' (are you missing an assembly reference?) Having read through their sample code already, I realized that this namespace and every function and class within it could be safely ripped from the code without losing functionality. It's a namespace simply for integrating with touchscreen devices (presumably Windows Phone 7, but maybe also tablets). But then I began to wonder- how come Microsoft's sample compiled but mine didn't? I copied their code exactly so there must be a setting somewhere that I need to change in Visual Studio in order to correct this. I tried creating a new project as a Windows Phone 7 game rather than a Windows game, however that only forced it to compile to a Windows Phone emulator and denied me the ability to change the resolution and other features which I clearly had the power to do in the sample code. So my question is simple - how do I properly use the namespace Microsoft.XNA.Framework.Input.Touch?

  Read the article

• Solving &ldquo;XmlSchemaException: The global element '&lt;elementName&gt;' has already been declare

  - by ChrisD

  I recently encountered this error when I attempted to consume a new hosted WCF service.  The service used the Request/Response model and had been properly decorated.  The response and request objects were marked as DataContracts and had a specified namespace.   My WCF service interface was marked as a ServiceContract and shared the namespace attribute value.   Everything should have been fine, right? [ServiceContract(Namespace = "http://schemas.myclient.com/09/12")] public interface IProductActivationService { [OperationContract] ActivateSoftwareResponse ActivateSoftware(ActivateSoftwareRequest request); } well, not exactly.  Apparently the WSDL generator was having an issue: System.Xml.Schema.XmlSchemaException: The global element 'http://schemas.myclient.com/09/12:ActivateSoftwareResponse' has already been declared. After digging I’ve found the problem; the WSDL generator has some reserved suffixes for its entities, including Response, Request, Solicit (see http://msdn.microsoft.com/en-us/library/ms731045.aspx).  The error message is actually the result of a naming conflict.  The WSDL generator uses the namespace of the service to build its reserved types.  The service contract and data contract share a namespace, which coupled with the response/request name suffixes I was using in my class names, resulted in the SchemaException. The Fix: Two options: Rename my data contract entities to use a non-reserved keyword suffix (i.e.  change ActivateSoftwareResponse to ActivateSoftwareResp). or; Change the namespace of the data contracts to differ from the service contract namespace. I chose option 2 and changed all my data contracts to use a “http://schemas.myclient.com/09/12/data” namespace value. This avoided a name collision and I was able to produce my WSDL and consume my service.

  Read the article

• Changing domain name - what are the practical steps involved

  - by Homunculus Reticulli

  I launched a website a couple of years ago, bright eyed and bushy tailed, with dreams of conquering the world. Unfortunately it wasn't to be. Now, that I am a bit older and wiser, I have spent some money on branding and creating more quality content etc, I am rebranding and relaunching the site with a new domain name. Although the traffic on the old site is laughable (i.e. non-existent), there are a few pages of good information on there and I don't want to lose any "juice" those pages may have gained because web crawlers have been seeing it for a few years now. Ok, the upshot of all that is this: I want to change my domain name from xyz.com to abc.com. I am maintaining the same friendly urls I had before, only the domanin name part of the url will change, so that any traffic coming to the old page will be forwarded/redirected? to the new page seamlessly. How do I go about achieving this (i.e. what are the steps I need to carry out, and to minimize any "disruption" to any credibility the existing site has with Googlebot etc? I am running Apache 2.x on a headless Linux (Ubuntu) server.

  Read the article

• Designing business objects, and gui actions

  - by fozz

  Developing a product ordering system using Java SE 6. The previous implementations used combo boxes, text fields, and check boxes. Preforming validation on action events from the GUI. The validation includes limiting existing combo boxes items, or even availability. The issue in the old system was that the action was received and all rules were applied to the entire business object. This resulted in a huge event change as options were changed multiple times. To be honest I have no idea how an infinite loop wasn't produced. Through the next iteration I stepped in and attempted to limit the chaos by controlling the order in which the selections could be made. Making configuration of BO's a top down approach. I implemented custom box models, action events, beans/binding, and an MVC pattern. However I still am unable to fully isolate action even chains. I'm thinking that I've approached the whole concept backwards in an attempt to stay closest to what was already in place. So the question becomes what do I design instead? I'm currently considering an implementation of Interfaces, Beans, Property Change Listeners to manage the back and forth. Other thoughts were validation exceptions, dynamic proxies.... I'm sure there are a ton of different ways. To say that one way is right is crazy, and I'm sure it will take a blending of multiple patterns. My knowledge of swing/awt validation is limited, previously I did backend logic only. Other considerations are were some sort of binding(jgoodies or otherwise) to directly bind GUI state to BO's.

  Read the article

• SharePoint: UI for ordering list items

  - by svdoever

  SharePoint list items have in the the base Item template a field named Order. This field is not shown by default. SharePoint 2007, 2010 and 2013 have a possibility to specify the order in a UI, using the _layouts page: {SiteUrl}/_layouts/Reorder.aspx?List={ListId} In SharePoint 2010 and 2013 it is possible to add a custom action to a list. It is possible to add a custom action to order list items as follows (SharePoint 2010 description): Open SharePoint Designer 2010 Navigate to a list Select Custom Actions > List Item Menu Fill in the dialog box: Open List Settings > Advanced Settings > Content Types, and set Allow management of content types to No  On List Settings select Column Ordering This results in the following UI in the browser: Selecting the custom Order Items action (under List Tools > Items) results in: You can change your custom action in SharePoint designer. On the list screen in the bottom right corner you can find the custom action: We now need to modify the view to include the order by adding the Order field to the view, and sorting on the Order field. Problem is that the Order field is hidden. It is possible to modify the schema of the Order field to set the Hidden attribute to FALSE. If we don’t want to write code to do it and still get the required result it is also possible to modify the view through SharePoint Designer: Modify the code of the view: This results in: Note that if you change the view through the web UI these changes are partly lost. If this is a problem modify the Order field schema for the list.

  Read the article

• Single CAS web application in a cluster

  - by Dolf Dijkstra

  Recently a customer wanted to set up a cluster of CAS nodes to be used together with WebCenter Sites. In the process of setting this up they realized that they needed to create a web application per managed server. They did not want to have this management burden but would like to have one web application deployed to multiple nodes. The reason that there is a need for a unique application per node is that the web-application contains information that needs to be unique per node, the postfix for the ticket id.  My customer would like to externalize the node specific configuration to either a specific classpath per managed server or to system properties set at startup.It turns out that the postfix for ticket ids is managed through a property host.name and that this property can be externalized.The host.name property is used in: /webapps/cas/WEB-INF/spring-configuration/uniqueIdGenerators.xmlIt is set in /webapps/cas/WEB-INF/spring-configuration/propertyFileConfigurer.xmlin a PropertyPlaceholderConfigurer.The documentation for PropertyPlaceholderConfigurer:http://static.springsource.org/spring/docs/2.0.x/api/org/springframework/beans/factory/config/PropertyPlaceholderConfigurer.htmlThis indicates that the properties defined through the PropertyPlaceHolderConfigurer can be externalized.To enable this externalization you would need to change host.properties so it is generic for all the managed servers and thus can be reused for all the managed servers: host.name=${cluster.node.id}Next step is to change the startup scripts for the managed servers and add a system property for -Dcluster.node.id=<something unique and stable>.Viola, the postfix is externalized and the web application can be shared amongst the cluster nodes.

  Read the article

• Collision with half of a semi-circle

  - by heitortsergent

  I am trying to port a game I made using Flash/AS3, to the Windows Phone using C#/XNA 4.0. You can see it here: http://goo.gl/gzFiE In the flash version I used a pixel-perfect collision between meteors (it's a rectangle, and usually rotated) that spawn outside the screen, and move towards the center, and a shield in the center of the screen(which is half of a semi-circle, also rotated by the player), which made the meteor bounce back in the opposite direction it came from, when they collided. My goal now is to make the meteors bounce in different angles, depending on the position it collides with the shield (much like Pong, hitting the borders causes a change in the ball's angle). So, these are the 3 options I thought of: Pixel-perfect collision (Microsoft has a sample) , but then I wouldn't know how to change the meteor angle after the collision 3 BoundingCircle's to represent the half semi-circle shield, but then I would have to somehow move them as I rotate the shield. Farseer Physics. I could make a shape composed of 3 lines, and use that as the collision object for the shield. Is there any other way besides those? Which would be the best way to do it(it's aimed towards mobile devices, so pixel-perfect is probably not a good choice)? Most of the time there's always a easier/better way than what we think of...

  Read the article

• Install Windows7 on drive with Ubuntu 12.04 already on. Is my plan good?

  - by John F

  I have Ubuntu 12.04 working fine, but need W7 occasionally. I just wanted to check that my plan for installing would work? Any help appreciated. Current partitions are: Partition....@ File System @ Mount Point @ Size.....@ Used.....@ Flags /dev/sda1....@ ext4........@ /ext4a......@ 37 GiB...@ 776 MiB..@ boot /dev/sda2....@ extended....@.............@ 122 GiB..@ -........@ ./dev/sda5...@ ext4........@ / ..........@ 37 GiB...@ 6 GiB....@ .unallocated @ unallocated @.............@ 7 GiB....@ - ...... @ ./dev/sda6 ..@ ext4........@ /home.......@ 77 GiB...@ 32 GiB...@ .unallocated @ unallocated @.............@ 65 GiB...@ - .......@ /dev/sda3...@ linux-swap..@.............@ 7 GiB....@ - .......@ My plan is to: - boot to ubuntu from USB ISO - change sda1 to NTFS - install W7 to sda1 - use the "Master Boot Record repair" utility to configure dual boot so I can see my original ubuntu installation as well as W7. Have I missed something? I'm concerned as to what the 776MB is that will be overwritten by the change to NTFS. It seems large for just the MBR? Would also appreciate it if anyone can explain what sda5 and 6 are being used for? Is sda5 Ubuntu and sda6 my data? Thanks in advance.

  Read the article

• Leadership Tip&ndash;Vent Up!

  - by D'Arcy Lussier

  Leadership is difficult, for many reasons. One of those reasons is that we not only need to keep ourselves motivated when difficult or challenging times come, but we also need to motivate our teams and keep them focussed on the tasks at hand regardless of the mortars being rained down around them. Inexperienced (and experienced) leaders can fall into the “me-too” mentality – that is, the leader sees themselves as part of the team member instead of the leader of the team. Once a leader changes the teams view that he/she is a peer and not the leader, dynamics can change on the team. One of the biggest dangers is that the leader starts sharing frustrations, fears, concerns, etc. with the team that they’re supposed to be leading on to victory. This can destroy a team’s morale and productivity. One simple thing you can do to counter this is remember this rule when it comes to venting: Vent Up! Don’t vent sideways or down, vent up. Vent to the people above you – they’re the ones that tend to have the power to actually change things anyway. You as a leader stay healthy by getting your frustrations and concerns off your chest, your team is still insulated from it, and your superiors are aware of issues that need to be addressed or can coach you through the obstacles. D

  Read the article

• Netbook Remix 10.04 to 10.10 upgrade using alternate iso

  - by Suman Subramonian

  I'm using Netbook Remix 10.04 now. I'm having the 10.10 alternate iso with me. If I use that iso to upgrade, will I lose my netbook version? I've seen in some forums that the upgrade resulted in a change from netbook version to desktop version. Updated on 15/12/2010 I upgraded the OS from 10.04 to 10.10. But I'm getting an error like this after restart: modprobe: FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory I searched in the forums and got a solution like this: Open Terminal gksudo gedit /etc/initramfs-tools/initramfs.conf change the line MODULES=most to MODULES=dep Then use Synaptic (SystemAdministrationSynaptic Package Manager) to reinstall initramfs-tools. I'll be definitely trying this later. After that when the system tries to login, my screen starts flashing with just the ubuntu netbook desktop wallpaper on the screen. No other options will be available. It will be flashing continuosly. If I press the power button then one window comes up with options like Shut down, Restart, Hibernate etc. And the screen won't stop flashing either. I've uploaded a 1 min video. Please go through it as it will give you a clear idea of the error which I'm facing now Video Link Here

  Read the article

• How do I develop database-utilizing application in an agile/test-driven-development way?

  - by user39019

  I want to add databases (traditional client/server RDBMS's like Mysql/Postgresql as opposed to NoSQL, or embedded databases) to my toolbox as a developer. I've been using SQLite for simpler projects with only 1 client, but now I want to do more complicated things (ie, db-backed web development). I usually like following agile and/or test-driven-development principles. I generally code in Perl or Python. Questions: How do I test my code such that each run of the test suite starts with a 'pristine' state? Do I run a separate instance of the database server every test? Do I use a temporary database? How do I design my tables/schema so that it is flexible with respect to changing requirements? Do I start with an ORM for my language? Or do I stick to manually coding SQL? One thing I don't find appealing is having to change more than one thing (say, the CREATE TABLE statement and associated crud statements) for one change, b/c that's error prone. On the other hand, I expect ORM's to be a low slower and harder to debug than raw SQL. What is the general strategy for migrating data between one version of the program and a newer one? Do I carefully write ALTER TABLE statements between each version, or do I dump the data and import fresh in the new version?

  Read the article

• Rotate a vector

  - by marc wellman

  I want my first-person camera to smoothly change its viewing direction from direction d1 to direction d2. The latter direction is indicated by a target position t2. So far I have implemented a rotation that works fine but the speed of the rotation slows down the closer the current direction gets to the desired one. This is what I want to avoid. Here are the two very simple methods I have written so far: // this method initiates the direction change and sets the parameter public void LookAt(Vector3 target) { _desiredDirection = target - _cameraPosition; _desiredDirection.Normalize(); _rotation = new Matrix(); _rotationAxis = Vector3.Cross(Direction, _desiredDirection); _isLooking = true; } // this method gets execute by the Update()-method if _isLooking flag is up. private void _lookingAt() { dist = Vector3.Distance(Direction, _desiredDirection); // check whether the current direction has reached the desired one. if (dist >= 0.00001f) { _rotationAxis = Vector3.Cross(Direction, _desiredDirection); _rotation = Matrix.CreateFromAxisAngle(_rotationAxis, MathHelper.ToRadians(1)); Direction = Vector3.TransformNormal(Direction, _rotation); } else { _onDirectionReached(); _isLooking = false; } } Again, rotation works fine; camera reaches its desired direction. But the speed is not equal over the course of movement - it slows down. How to achieve a rotation with constant speed ?

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >