Search Results

Search found 22017 results on 881 pages for 'production support'.

Page 550/881 | < Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >

• ML 350 additional SATA RAID controller (mirror only)

  - by Nicholas

  I have a Proliant ML350 G8 with two SAS raid arrays currently set up - thereby maxing the default P420i raid controller. I need to set up a large video dump space in addition to this existing set-up (for non backed up, non-critical, temporary storage). I had planned to just add a 2TB SATA disk and plug it into the motherboard. However I it occurred to me the motherboard might have built-in mirror RAID support? Therefore I could use two SATA disks and have some semblance of redundancy. Is this possible? Or would I need to get a cheap raid card? Any recommendations?

  Read the article

• What are the packages/libraries I should install before compiling Python from source?

  - by Lennart Regebro

  Once in a while I need to install a new Ubuntu (I used it both for desktop and servers) and I always forget a couple of libraries I should have installed before compiling, meaning I have to recompile, and it's getting annoying. So now I want to make a complete list of all library packages to install before compiling Python (and preferably how optional they are). This is the list I compiled with below help and by digging in setup.py. It is complete for Ubuntu 10.04 and 11.04 at least: build-essential (obviously) libz-dev (also pretty common and essential) libreadline-dev (or the Python prompt is crap) libncursesw5-dev libssl-dev libgdbm-dev libsqlite3-dev libbz2-dev More optional: tk-dev libdb-dev Ubuntu has no packages for v1.8.5 of the Berkeley database, nor (for obvious reasons) the Sun audio hardware, so the bsddb185 and sunaudiodev modules will still not be built on Ubuntu, but all other modules are built with the above packages installed. Python 2.5 and Python 2.6 also needs to have LDFLAGS set on Ubuntu 11.04 and later, to handle the new multi-arch layout: export LDFLAGS="-L/usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)" For Python 2.6 and 2.7 you also need to explicitly enable SSL after running the ./configure script and before running make. In Modules/Setup there are lines like this: #SSL=/usr/local/ssl #_ssl _ssl.c \ # -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ # -L$(SSL)/lib -lssl -lcrypto Uncomment these lines and change the SSL variable to /usr: SSL=/usr _ssl _ssl.c \ -DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \ -L$(SSL)/lib -lssl -lcrypto Python 2.6 also needs Modules/_ssl.c modified to be used with OpenSSL 1.0, which is used in Ubuntu 11.10. At around line 300 you'll find this: else if (proto_version == PY_SSL_VERSION_SSL3) self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */ else if (proto_version == PY_SSL_VERSION_SSL2) self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */ else if (proto_version == PY_SSL_VERSION_SSL23) self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */ Change that into: else if (proto_version == PY_SSL_VERSION_SSL3) self->ctx = SSL_CTX_new(SSLv3_method()); /* Set up context */ #ifndef OPENSSL_NO_SSL2 else if (proto_version == PY_SSL_VERSION_SSL2) self->ctx = SSL_CTX_new(SSLv2_method()); /* Set up context */ #endif else if (proto_version == PY_SSL_VERSION_SSL23) self->ctx = SSL_CTX_new(SSLv23_method()); /* Set up context */ This disables SSL_v2 support, which apparently is gone in OpenSSL1.0.

  Read the article

• Entering IT field with only hobby experience?

  - by EA Bisson

  I can build computers, install servers, network mac, linux, and windows, build servers, do support etc. I do all of this at home/for friends/for hobbies. I have worked with computers every day since I was in elementary school (commodore 64, windows 3.1 etc.). I have IT bachelors in administrative management (so basically nothing good). I am getting another bachelor's in server admin, including about 5 certifications. I am the IT go to gal at every position usually because I know more than the IT people and have better people skills. My job history is random: office admin, hair braider, disney ride operator, camp counselor etc. I found a job I want its a entry level specialist (server) position. What do I put on a resume?

  Read the article

• Why does a group policy not applied to the domain administrator account?

  - by Saariko

  I have a working policy on my entire domain. I just found out, when logging with the domain administrator, that this policy is not applied (EDIT: Running : gpresult shows that the GPO's are applied - but, this GPO is for Drive Mappings, and the actual drive mappings are NOT shown) The administrator account - does not have any login script on his profile tab. My GPO's are mainly small/atomic settings: single GPO to handle each settings: UAC, Firewall, printers. GPO status for the object is enabled That's an overview of the Drive Maps: Reading on MS support site, I checked the delegation tab, and it is marked as applied to domain and enterprise admins. Every user gets these policies correctly. The OU that is set is the root of the domain. (for testing purpose - I did that to eliminate hierarchy issues - did not help) Block Inheritance is disabled. (never used it anyway) GPO link GPO Security Filterings

  Read the article

• Managing Scripts in Oracle SQL Developer

  - by thatjeffsmith

  You backup your databases, right? You backup you home computer – your media collection, tax documents, bank accounts, etc, right? You backup your handy-dandy SQL scripts, right? Ok, now that I’ve got your head nodding, I want to answer a question I get every so often: How can I manage my scripts in SQL Developer? This is an interesting question. First, it assumes that one SHOULD manage their scripts in their IDE. Now, what I think the question generally gets around to is, how can we: Navigate to our scripts Open them Execute them What a good IDE should have is an interface to your existing Version Control System (VCS.) SQL Developer supports out-of-the-box both Subversion and Git. You can also download an extension via check-for-updates to get support for CVS. Now, what I’m about to show you COULD be done without versioning and controlling your scripts – but I want to ask you why you wouldn’t want to do this? So, I’m going to proceed and assume that you do INDEED version your scripts already. Seeing what scripts you’ve already got in your repository This is very straightforward – just open the Team Versions panel. Then connect to your repository. Shows you the files in your source control system. Now, I could ‘preview’ said file right away. If I open the file from here, we get a temp file copy down from the server to the local machine. This is a local temp copy of the controlled script – I can read/execute, but not write to it. And that might be all you need. But, if your script calls other scripts, then you’re going to want to check out the server copy of your stuff down your local SVN working copy directory. That way when your script calls another script – you’re executing the PRODUCTION APPROVED copies of said scripts. And if you do SPOOL or other file I/O stuff, it will work as expected. To get to those said client copies of your scripts… Enter the Files Panel The Files panel is accessible from the View menu. You can get to your files, one of two ways. If you’ve touched the file recently, you can see it under the Recent tree. Otherwise, you can navigate to your local ‘checked out’ copies of your script(s). Open your local copies, see what’s changed, etc. And I can access the change history and see what’s been touched… What changes am I going to ‘push out’ if I commit this back to the server? Most of us work on teams, yes? This panel also gives me a heads up if someone else is making changes to the same file. I can see the ‘incoming’ changes as well. To Sum It Up… If I want to get a script to run: do a full get to your local directory open the script(s) The files panel will tell you if your local copy is out of date from the server and if you have made local changes you’ve forgotten to commit back up to the server and your fellow teammates. Now, if you’re the selfish type and don’t want to share, that’s fine. But you should still be backing up your scripts, and you can still use the Files panel to manage your scripts.

  Read the article

• 3rd monitor with Dell Precision 490

  - by Animesh Kumar

  I am trying to go for a 3 monitor setup on my workstation, but need some information before I can invest in a new graphics card and 2 monitors. Would be glad to get some help here: I have a Dell Precision 490 workstation with Nvidia Quadro FX 4500 graphics card (PCI-E 16) on it. It has 2 DVI-D ports that can support 2 monitors upto 2560x1600 resolution. For the third monitor, I was looking at Nvidia NVS 295 card, however I am not sure if it is physically possible to hook another card to the motherboard. Here is the spec of Precision 490: http://www.dell.com/downloads/global/products/precn/en/spec_precn_490_en.pdf Can I attach NVS 295 to it? If not, what options do I have?

  Read the article

• Thin virtual host [migrated]

  - by Adam Ryczkowski

  My work setup relies on old Windows XP. Now, when Windows XP isn't supported by new hardware, it's getting harder and harder to buy a notebook on which Windows XP can run natively with all essential hardware (wireless cards, graphics, sound etc). Since I don't expect my personal setup to turn away from Windows XP any time soon, I'm investigating the following trick: why not buy any decent hardware which Linux can fully utilize, and use it as a virtual host for a guest session with e.g. Windows XP. I like using hibernation, so I prefer this Linux to be as thin as possible, only enough to support VirtualBox, KVM or any other virtualization software. Question: Are there any "standard" ways to do this, like Linux distributions aimed specifically on being light virtualization host?

  Read the article

• Partner Webcast: Implementing on SOA - A Hands-On Technology Demonstration

  - by Thanos

  Service Oriented Architecture enables organizations to operate more efficiently and react faster to opportunities. How? By helping you create a flexible application architecture that supports greater business agility. You decide how quickly you want to move. You can start by implementing an application integration platform. Then, you can evolve your environment gradually by introducing business process management, business rules, governance and event processing. This unified but flexible approach also allows you to maximize the long-term cost reduction benefits of SOA and cloud-based applications. In this session, you dive into SOA Suite and you will see the usage of some advanced features. The topics covered range from adapters, automatic and custom business process correlation through service routing, rule based and manual decisions and to error handling, compensations and extending SOA Suite with your own Java code. Agenda: Service Oriented Architecture The Auctions Scenario Live Demo of the Oracle SOA Suite Features Connecting to non service enabled technologies with adapters (Database and File adapter) Orchestrating services with BPEL processes Correlating processes with correlation sets Mediating services Service Component Architecture Event Handling User Notification Human Workflow Business Rules Fault Handling patterns Developing custom components with Spring and using them in SOA Suite composites Delivery Format This FREE online LIVE eSeminar will be delivered over the Web. Registrations received less than 24hours prior to start time may not receive confirmation to attend. Duration: 1 hour Register Now For all your questions and support requests to adopt and implement the latest Oracle technologies please contact us at [email protected]

  Read the article

• USB 3.0 not functioning fully

  - by Simon Sheehan

  After installing GNU/Linux today onto my Lenovo Y570 laptop, I ran into an issue quickly - the USB 3.0 support. 2/3 of my USB ports are 3.0 so I kind of need them. The ports are powered at the very least - my phone is charging from one, however, plugging in external drives, USB drives, or even a mouse gives no response. The drives spin up, etc, but they do nothing more than that. So there is power, but no information flowing to them. What am I missing here? What can I try to enable to make things work?

  Read the article

• How can I scan documents from a Lexmark x543n over the network on OS X 10.6

  - by Thomas Lötzer

  Hi, I just got a Lexmark x543dn and have some trouble getting my computer to recognize it as a scanner. The printer is working fine from my OS X 10.6 machine, setup was as easy as it gets. I just connected it to my network, gave it a name and added it under that name as a networked printer in OS X. According to the Apple support website, the driver in OS X (I upgraded to the newest drivers already) should also provide scanning capabilities. However when I run the image capture app included in OS X it tells me that there are no scanners available. Can anybody tell me what I have to do to get OS X to recognize the scanner? Thanks, Thomas

  Read the article

• Acer Aspire 3680 Wireless Signal Problem

  - by SHiNKiROU

  I am using Acer Aspire 3680. I recently reinstalled Windows Vista, and the wireless did not work by default. I installed the "Atheros Wireless LAN Driver" on this site: http://support.acer-euro.com/drivers/notebook/as_3680.html The result, the wireless APs are successfully scanned. However, when I tried to join a network, even with 5/5 signal, an error message showed up diagnosing signal too little. I restarted as Ubuntu, and wireless worked perfectly, with same computer position. Even more confusing, When I moved to the kitchen (2 meters close to the router), the wireless connected, when I move back to my room, wireless failed on Vista and worked on Ubuntu. It is clearly the driver problem. Acer laptops seems come with pre-installed drivers, but after re-installation, they are all gone. (I can't find the original Acer backup disc) Please do not answer "move closer to the AP" and something related to "interference", as wireless worked with Ubuntu's default driver.

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• Is it possible to build a single game to run in Facebook & Google+?

  - by Songo

  I was asked by my customer to build a Facebook game. The game would be something similar to Mafiawars.com where the game is hosted on a server and run through a frame on Facebook. The thing is after several days of negotiations with the customer and near the finalization of the requirements he mentioned something strange. He said that if the game was successful on Facebook then we may add it to Google+ too. I thought he meant that we'll develop a new version for Google+, but he refused as he argued that the game should be able to support both sites and he won't pay for the same game twice. Now I haven't developed neither Facebook nor Google+ games before, so I don't know if it is possible to build a single Facebook/Google+ game. How would you react to such requirement? How would you design such an application? Notes I confirmed with the customer that he wasn't talking about using Open ID he wanted full integration (sharing post, friend requests,..etc.) I really don't want to lose that customer for numerous reasons (He even agreed to extend the project time to compensate for the time I need to learn Facebook/Google+ APIs)

  Read the article

• Can't find newer DLINK Router DIR-400 firmware

  - by Junior Mayhé

  If you're here, it means you also have a Dlink 400 router. I asked DLINK but they didn't answer my question. I asked DLINK support again, but this time no answer (2 weeks later). In DLINK FTP site there is no firmware for DIR-400. Past year, Googling around Russia, I found a FIRMWARE_DIR400_v1.02B03.bin. But I am trying to figure out if is there any update, a 1.03 version or superior. Can anyone tell me why DLINK doesn't show this firmware update on their site, and if this DIR-450 is compatible with mine?

  Read the article

• Creating a branch for every Sprint

  - by Martin Hinshelwood

  There are a lot of developers using version control these days, but a feature of version control called branching is very poorly understood and remains unused by most developers in favour of Labels. Most developers think that branching is hard and complicated. Its not! What is hard and complicated is a bad branching strategy. Just like a bad software architecture a bad branch architecture, or one that is not adhered to can prove fatal to a project. We I was at Aggreko we had a fairly successful Feature branching strategy (although the developers hated it) that meant that we could have multiple feature teams working at the same time without impacting each other. Now, this had to be carefully orchestrated as it was a Business Intelligence team and many of the BI artefacts do not lend themselves to merging. Today at SSW I am working on a Scrum team delivering a product that will be used by many hundreds of developers. SSW SQL Deploy takes much of the pain out of upgrading production databases when you are not using the Database projects in Visual Studio. With Scrum each Scrum Team works for a fixed period of time on a single sprint. You can have one or more Scrum Teams involved in delivering a product, but all the work must be merged and tested, ready to be shown to the Product Owner at the the Sprint Review meeting at the end of the current Sprint. So, what does this mean for a branching strategy? We have been using a “Main” (sometimes called “Trunk”) line and doing a branch for each sprint. It’s like Feature Branching, but with only ONE feature in operation at any one time, so no conflicts Figure: DEV folder containing the Development branches.   I know that some folks advocate applying a Label at the start of each Sprint and then rolling back if you need to, but I have always preferred the security of a branch. Like: being able to create a release from Main that has Sprint3 code even while Sprint4 is being worked on. being sure I can always create a stable build on request. Being able to guarantee a version (labels are not auditable) Be able to abandon the sprint without having to delete the code (rare I know, but would be a mess if it happened) Being able to see the flow of change sets through to a safe release It helps you find invalid dependencies when merging to Main as there may be some file that is in everyone’s Sprint branch, but never got checked in. (We had this at the merge of Sprint2) If you are always operating in this way as a standard it makes it easier to then add more scrum teams in the future. Muscle memory of this way of working. Don’t Like: Additional DB space for the branches Baseless merging between sprint branches when changes are directly ported Note: I do not think we will ever attempt this! Maybe a bit tougher to see the history between sprint branches since the changes go up through Main and down to another sprint branch Note: What you would have to do is see which Sprint the changes were made in and then check the history he same file in that Sprint. A little bit of added complexity that you would have to do anyway with multiple teams. Over time, you can end up with a lot of old unused sprint branches. Perhaps destroy with /keephistory can help in this case. Note: We ALWAYS delete the Sprint branch after it has been merged into Main. That is the theory anyway, and as you can see from the images Sprint2 has already been deleted. Why take the chance of having a problem rolling back or wanting to keep some of the code, when you can just abandon a branch and start a new one? It just seems easier and less painful to use a branch to me! What do you think?   Technorati Tags: TFS,TFS2010,Software Development,ALM,Branching

  Read the article

• Manual Duplex for Mac (and/or Linux)

  - by chris_l

  Hi, my printers don't support automatic duplex printing. I'm looking for a solution for my Mac (BTW, also for Linux) that I've seen with most Windows printer drivers: Check "Manual duplex" in the printer screen Printer starts printing one side A dialog appears, asking me to flip the pages Printer prints the other side. One thing I can do, is "print odd pages", then reopen the dialog and "print even pages", but this is very inconvenient, especially when I only want to print a certain page range of the document (the Mac dialog forgets my previous page range every time). It gets even more inconvenient, when printing 2-up double sided, or when changing additional settings for this one printout. So is there maybe some tool, that can do this? Or maybe a "virtual printer driver" that can sit somewhere between the dialog and the actual printer driver, which manages these steps? (The Windows tool http://en.wikipedia.org/wiki/FinePrint can do something like that, but I don't need all of its features - and I need it on Mac/Linux) Thanks, Chris

  Read the article

• How to improve batching performance

  - by user4241

  Hello, I am developing a sprite based 2D game for mobile platform(s) and I'm using OpenGL (well, actually Irrlicht) to render graphics. First I implemented sprite rendering in a simple way: every game object is rendered as a quad with its own GPU draw call, meaning that if I had 200 game objects, I made 200 draw calls per frame. Of course this was a bad choice and my game was completely CPU bound because there is a little CPU overhead assosiacted in every GPU draw call. GPU stayed idle most of the time. Now, I thought I could improve performance by collecting objects into large batches and rendering these batches with only a few draw calls. I implemented batching (so that every game object sharing the same texture is rendered in same batch) and thought that my problems are gone... only to find out that my frame rate was even lower than before. Why? Well, I have 200 (or more) game objects, and they are updated 60 times per second. Every frame I have to recalculate new position (translation and rotation) for vertices in CPU (GPU on mobile platforms does not support instancing so I can't do it there), and doing this calculation 48000 per second (200*60*4 since every sprite has 4 vertices) simply seems to be too slow. What I could do to improve performance? All game objects are moving/rotating (almost) every frame so I really have to recalculate vertex positions. Only optimization that I could think of is a look-up table for rotations so that I wouldn't have to calculate them. Would point sprites help? Any nasty hacks? Anything else? Thanks.

  Read the article

• Fatal error on "mode 120000" file during git -> svn migration

  - by Oliver

  Following instructions from the following website: http://code.google.com/p/support/wiki/ImportingFromGit I'm trying to migrate a git repository to svn, but during the "git rebase master tmp" step it fails with the following error after apply the first few patches: $ git rebase master tmp First, rewinding head to replay your work on top of it... Applying: Imported Applying: Cleaned up the readme file Applying: fix problem with versions fatal: unable to write file foobar mode 120000 Patch failed at 0003 fix problem with versions When you have resolved this problem run "git rebase --continue". If you would prefer to skip this patch, instead run "git rebase --skip". To restore the original branch and stop rebasing run "git rebase --abort". I understand that 120000 may refer to a symlink, but Subversion has supported symlinks for a long time now. Subversion installed is 1.6.5, Git is 1.6.3.3. Running on Ubuntu Linux. The system is not running out of disk space and this operation is taking place within my home directory so permissions should not be an issue.

  Read the article

• Hooking up a laptop to an HDTV via VGA

  - by Redandwhite

  I have a 2-3 year old laptop running XBMC, and I have an HDTV that I'd like to connect it to. The only output that the laptop has is VGA (and S-Video - I don't know if the TV supports it) . The TV doesn't support VGA input, but takes HDMI. -- Is it worth buying a VGA-to-HDMI converter? As in this: -- Are there any other, cheaper options available? There's a lot of information around the WWW, but a lot of it's outdated and it's hard to digest everything. I know of at least one other option, and that's a USB to HDMI connection, but I don't even know what to look for or where to get started on that one. I also suspect it might be a little more complicated. If it's cheaper then it could be worth it. EDIT More Details: Intel integrated graphics card (Intel 945 Express Chipset Family) The TV supports up to 1080p resolution

  Read the article

• Best way to find the computer a user last logged on from?

  - by Garrett

  I am hoping that somewhere in Active Directory the "last logged on from [computer]" is written/stored, or there is a log I can parse out? The purpose of wanting to know the last PC logged on from is for offering remote support over the network - our users move around pretty infrequently, but I'd like to know that whatever I'm consulting was updating that morning (when they logged in, presumably) at minimum. I'm also considering login scripts that write the user and computer names to a known location I can reference, but some of our users don't like to logout for 15 days at a time. If there is an elegant solution that uses login scripts, definitely mention it - but if it happens to work for merely unlocking the station, that would be even better!

  Read the article

• IIS reveals internal IP address in content-location field - fix

  - by saille

  Referring: http://support.microsoft.com/kb/q218180/, there is a known issue in IIS4/5/6 whereby it will reveal the internal IP of a web server in the content-location field of the HTTP header. We have IIS 6. I have tried the fix suggested, but it has not worked. The website is configured to send all requests to ASP.NET, and I am wondering if this is why the fix, which addresses IIS configuration, has not worked for us. If this is the case, how would we fix this in ASP.NET? We need to fix this issue in order to pass a security audit.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendati

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• UPS recommendations for three grey boxes?

  - by Margaret

  Hey all We have a series of grey-box style computers acting as servers at my workplace (rather than rack-mount). We were looking to get Uninterruptible Power Supplies for them. However, I'm not sure how many at what capacity are required. I'd assume it would be a good idea to hook the peripherals in as well - there's a 18.5" LCD monitor with a KVM, along with a couple of USB hard drives that require power. I currently have the most vital machine hooked up to a cheap (temporary) UPS, but it's probably close to worse than nothing. I'm looking for reasonable value for money, though I can probably negotiate with my boss on price range. I recognise that I may well need to buy two (or even three) UPSs to support the three machines. Any recommendations?

  Read the article

• Flexible classroom environments (OS, Office)

  - by HannesFostie

  I work in the IT department of a training center, we still offer XP and Office 2003 trainings but also offer Vista and Win7 and Office 2007. Currently, we use VMs on VMware Server but this is obviously not a superb choice. We're thinking of implementing something like VDI (brainstorm phase, we hardly have any details) but I decided to check here if people would have some clever alternatives. Requirements: * Flexible when it comes to deployment * Centralized management would be a big plus * Allow for different software, whether they be compatible or not (all of office except for outlook can be installed simultaneously. for outlook you need to choose between 2003 or 2007) * Allow for different OS We have a big enough budget to implement a proper SAN environment to accomodate the virtualization of the solution, whatever kind it may be. A support contract will probably be necessary as well, because we need to be able to offer quick solutions to problems and with only 2 sysadmins that is simply impossible to guarantee.

  Read the article

• Accenture Foundation Platform for Oracle (AFPO) – Your pre-build & tested middleware platform

  - by JuergenKress

  The Accenture Foundation Platform for Oracle (AFPO) is a pre-built, tested reference application, common services framework and development accelerator for Oracle’s Fusion Middleware 11g product suite that can help to reduce development time and cost by up to 30 percent. AFPO is a unique accelerator that includes documentation, day one deliverables and quick start virtual machine images, along with access to a skilled team of resources, to reduce risk and cost while improving project quality. It can be delivered all at once or in stages, on-site, hosted, or as a cloud solution. Accenture recently released AFPO v5 for use with their clients. Accenture added significant updates in v5 including Day 1 images & documentation for Webcenter & ADF Mobile that are integrated with 30 other Oracle Middleware products that signifigantly reduced the services aspect to standing these products up. AFPO v5 also features rapid configuration and implementation capabilities for SOA/BPM integrated with Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Business Intelligence, Oracle Identity Management and Oracle ADF Mobile.  AFPO v5 also delivers a starter kit for Oracle SOA Suite which builds upon the integration methodology, leading practices and extended tooling contained within the Oracle Foundation Pack. The combination of the AFPO starter kit and Foundation Pack jump-start and streamline Oracle SOA Suite implementation initiatives, helping to reduce the risk of deploying new technologies and making architectural decisions, so clients can ultimately reduce cost, risk and the time needed for an implementation.  You'll find more information at: Accenture's website:  www.accenture.com/afpo YouTube AFPO Telestration:  http://www.youtube.com/watch?v=_x429DcHEJs Press Release Brochure Contacts: [email protected] Patrick J Sullivan (Accenture – Global Oracle Technology Lead), [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: AFPO,Accenture,middleware platform,oracle middleware,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

< Previous Page | 546 547 548 549 550 551 552 553 554 555 556 557  | Next Page >