Search Results

Search found 18191 results on 728 pages for 'single board'.

Page 552/728 | < Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• How ZFS handles online replacement in a RAID-Z (theoretical)

  - by Kevin

  This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

  Read the article

• Starting multiple Chrome full screen instances on multiple monitors from (batch) script

  - by Bob Groeneveld

  My goal is to show different web content full screen on multiple monitors automatically after booting from a single computer. The browser I would like to use is Chrome. If Chrome does not support this and Firefox does that would be fine. The OS I would prefer is Windows, if it turns out that Linux is possible that would be fine. On Windows it is possible to set the position of the Chrome browser window (--window-position=) and make Chrome start in full screen mode (--kiosk). Using these options combined you can start Chrome full screen on any of the desktops/screens that you have connected to your computer. I have managed to get this working. However, if I then try to do the same thing a second time to have Chrome full screen on a second screen the second Chrome window will open over the first window, no matter the coordinates I use for the --window-position parameter. I have tried using Chrome profiles and copying the Chrome directory and starting the second chrome.exe. All these things result in the same behaviour.

  Read the article

• How can I remove all drivers and other files related to a USB Mass Storage device?

  - by Bob

  I have a flash drive here that does not work on one OS on computer - let's call it the desktop Windows 7. It works fine on another computer - laptop Windows 7. It also works fine on Windows 8 on the same desktop computer. Other flash drives work fine under desktop Windows 7. So not a hardware issue, not a generic USB Mass Storage driver issue. It's something specific to this drive. On desktop Windows 7, I can connect the drive but no volume comes up under Windows Explorer. Ditto for Disk Management. With diskpart, loading hangs until I unplug the drive, if I replug it and try list disk it hangs again. If I unplug the drive at this point, list disk prints out all attached drives - including the just removed flash drive. The drive consistently appears under Device Manager, but uninstalling the drivers, restarting and reinstalling the drivers (by inserting the drive) only works for the first insertion. After that it fails again. I get the feeling that the driver files are not actually removed, and are corrupted, meaning every reinstall it's the same corrupted drivers being installed. Is there any way to remove these drivers completely? Or perhaps some other setting Windows 7 retains? Formatting the drive through another computer/OS does not help. I've also tried a complete wipe and rebuild of the MBR and single partition. The allocation unit size makes no difference; neither does a NTFS format. This is a relatively small matter, and I would not like to reinstall the entire OS!

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• 7zip many files from different folders?

  - by mafutrct

  I would like to add a large number of files with different names from different folders to a single 7zip archive using 7za.exe. This should be simple, but it turned out to be a major pain. I created a file that contains the paths (7za -a @list.txt) but once there are too many (~100) files, it fails. Apparently the content of the argument file is pushed onto the command line buffer, which is far too small (the number of files to add is 1m). Splitting the process up by adding the files one by one is not feasible due to the way 7za works: When adding the next file, it creates a copy of the archive, adds the file to the copy and finally replaces the original. This is terribly slow once the archive gets to a couple 100MB in size. So far I am using a combination of the two approaches by adding a dozen files each time in a loop, but it is an unreliable hack and still very slow. Is there a better way to do it? I tried to use 7zip wrapper DLLs (I'm a C# programmer), but none of them worked reliably and I was repeatedly suggested to just use 7za instead.

  Read the article

• Standards for documenting/designing infrastructure

  - by Paul

  We have a moderately complex solution for which we need to construct a production environment. There are around a dozen components (and here I'm using a definition of "component" which means "can fail independently of other components" - e.g. an Apache server, a Weblogic web app, an ftp server, an ejabberd server, etc). There are a number of weblogic web apps - and one thing we need to decide is how many weblogic containers to run these web apps in. The system needs to be highly available, and communications in and out of the system are typically secured by SSL Our datacentre team will handle things like VLAN design, racking, server specification and build. So the kinds of decisions we still need to make are: How to map components to physical servers (and weblogic containers) Identify all communication paths, ensure all are either resilient or there's an "upstream" comms path that is resilient, and failover of that depends on all single-points of failure "downstream". Decide where to terminate SSL (on load balancers, or on Apache servers, for instance). My question isn't really about how to make the decisions, but whether there are any standards for documenting (especially in diagrams) the design questions and the design decisions. It seems odd, for instance, that Visio doesn't have a template for something like this - it has templates for more physical layout, and for more logical /software architecture diagrams. So right now I'm using a basic Visio diagram to represent each component, the commms between them with plans to augment this with hostnames, ports, whether each comms link is resilient etc, etc. This all feels like something that must been done many times before. Are there standards for documenting this?

  Read the article

• What is a suitable simple, open web server for Windows?

  - by alficles

  I'm looking for a dead simple web server for Windows. Load will not be high as it will be primarily serving binaries for a WPKG update service. It needs to serve the entire contents of a single folder over HTTP on a configurable (high) port. No CGI or other scripting is required, but it might be nice for future features. I started with Mongoose, since it doesn't even have an installation requirement (a very nice perk), but it fails to start when run as a service. (Technically, it acts as it's own installer.) I've investigated LighTPD as well, but it appears to be minimally (at best) tested on Windows. And naturally, I'm looking for something free. As in beer is good, but speech is better, as always. Edit: I didn't mention this initially, but non-tech people will be doing the install. They'll have whatever script I write for the install, but the goal is a simple system that is easy to troubleshoot. (I almost worded this question "What is the best...", but Serverfault rightly observed that that is a subjective question. And it's really not an optimization problem, any suitable solution will work. I just can't seem to find one for Windows.)

  Read the article

• Performance tweaks and upgrades for VMWare Server 2

  - by sjohnston

  Our software department has a server running VMWare Server 2. We typically have 8-10 VMs running as test environments (Win XP and Server 08) for various versions of our software, and one VM that is used as a build server (Win XP). The host is running Server 2003 R2. It has 32GB RAM, 8 core Xeon 3.16GHz CPU, one disk for host OS and two raid disks for VMs. The majority of the time, this setup behaves very well and there are no complaints. Other times, the VMs can be very laggy. This is sometimes, but not always, correlated to heavy load on the build server. I'm a software developer, not an IT pro, but it seems to me that this machine should be beefy enough to handle this many VMs. Is this occasional performance hit likely just because we're hitting the limits of the hardware, or should I be looking for another culprit? From what I've read, I'm guessing if there's a bottleneck, it's probably disk I/O with all these VMs running off two disks (especially the build server). Would spreading the VMs over more disks, and/or switching to SSDs give us a significant performance boost? Other things I've read may increase performance: single virtual processor per VM removing/disabling unused virtual hardware preallocated disk space not using snapshots setting a reserved memory limit on the host and disabling VM memory swapping Can anyone confirm or deny if any of these improve performance? What other good tweaks have I missed?

  Read the article

• How can I remotely display images on my computer?

  - by Jakob

  What I Have: A laptop booted with Ubuntu and a stationary computer dual-booted with Ubuntu and Vista, both connected through a wireless ad-hoc network. What I Want: I want a way to display images in fullscreen on my stationary, using my laptop as a "remote control". I want to be able to choose another picture at any time and have my stationary computer remain in fullscreen mode at all times. Preferably, I should also be able to display just an empty (black) screen. How can I arrange for this? What I Have Tried: I have tried simply SSH:ing into my stationary computer and opening the image files using an image viewer, but all of the ones that I have tried (Eye of Gnome, Mirage, Gwenview, and others) open a new window for every new image. I don't know how to force them into using a single instance. I have tried using the VLC remote control command line interface, but apart from seeming somewhat unreliable (exiting with segmentation faults at one point), it also displays some images with a green border and forces me to pause playback in order for the image to remain on screen. Bonus Question: In my final setup, I also need to play music through my stationary computer's speaker and have the ability to switch to another track at any point, like with the images. Preferably, I would like to control the images and the audio through the same interface. How can I best achieve this?

  Read the article

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• FreeNAS pool configuration - RAID1 + other drives

  - by trnelson

  Simple questions, really. I found this answer with a similar setup, but not sure it answers my question. If it does, I'm curious why since the answer seems a bit unsure: ZFS Hard Drive Configuration in FreeNAS I'm building a server which will be used primarily for backup, plus some media streaming, possibly with Plex. I seem to understand most everything I need, but I'm still a bit confused on how pools work, and how to configure them for my scenario. I will have 2x 2TB WD Red drives, which I plan on using in a mirrored set up (RAID1). This would be for backup, and I'd also like to do offsite backup to my CrashPlan account from this array. I also have a few other drives: 1.5TB, 320GB, 250GB. I'm not sure exactly what to do with them yet, but looking for options. FreeNAS OS will be running from a 16GB USB Flash drive. Would it be wise to use the 1.5TB as a backup-backup, essentially as a mirror or perhaps for snapshots of the 2TB RAID1? I'm still learning about snapshots. Should the 2TB mirrored drives be in their own pool? Should the other drives be set up in their own pools as well, or should they be JBOD in a single pool? They may or may not get much use since the 2TB array is plenty for me. Does a dataset basically mimic the idea of a partition or a network share? In other words, I would map \SERVER\Share to X: on my laptop? Let's say I wanted to use the 250GB drive as an encrypted drive to store all of my cat pictures. Would it have to be in its own pool? If I use jails apps, should they go in the backup RAID1, or in another place? Thank you!

  Read the article

• How to scan multiple pages from a book under Linux?

  - by rumtscho

  I want the process to look like: I choose the correct scan settings (dpi, color depth, etc) I lay the first page on the scanner and trigger the process The scanner scans the page and waits for me to position the next page correctly I confirm that the next page is ready for scanning Repeat the above two steps until I tell the scanner that there are no more pages to come The scanner saves everything into a single PDF. I tried both xsane and gscan2pdf. First problem: they want me to know how many pages will be scanned. This is already a nuisance, but I can do the counting if needed. The main problem is that in step 3, the scanner does not pause. It is probably optimised for being fed loose sheets. The next scan process is triggered automatically as soon as the CCD has returned to the start position. The time the scanner needs to return the CCD is very short and I can't turn the page and position the book properly. Is there a software which can do the scan process in the way I described above, or did I just miss a setting available in xsane or gscan2pdf to make the scanner pause? If it makes any difference, the scanner is an Epson Stylus SX620FW, I run it using the manufacturer-provided driver.

  Read the article

• effective back-up using Raid / Win7 back-up

  - by Job

  I have a stand-alone pc system with two 2 tb harddiscs, one of which configured as Raid1, i.e. mirorring. The operational drive is partitioned. I use an external 1 tb harddisc for back-up using Windows 7 back-up facility which will be swapped weekly and stored on other premises. I back-up all partitions AND allow a system back-up. All application software is on the C: partition. Questions: How can I see whether Raid1 is working; i.e. is doing its job. All I see now is a status message in the start-up procedure that says its status is normal. How can I see used or available space on Raid 1? The Win-7 backup allows for 1 schedule only as far as I can see. I want daily back-ups of data. However due to the single schedule I am forced to do the time-consuming system back-up and c: back-up as well. Is there a way to activate two schedules allowing a frequent (daily) data back-up and a system back-up with c: drive back-up on a say weekly basis? Of course it can be forced by hand but I am likely to forget that. I am not the programming type of person so looking for simple and controllable solutions. Thank you - any help is apreciated.

  Read the article

• how to rewrite '%25' in url

  - by nn4l

  My website software replaces space characters with '+' characters in the URL, A proper link would look like 'http://www.schirmacher.de/display/INFO/How+to+reattach+a+disk+to+XenServer' for example. Some websites link to that article but somehow their embedded editor can't handle the encoding, so what I see in the httpd log files is actually GET /display/INFO/How%2525252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer which of course leads to a 404 error. It seems that the '+' character is encoded as '%2b' and then the '%' character is encoded as '%25' - several times. Since there are many such references to different pages from different websites, I would like to rewrite the url so that the visitors get the correct page. Here's my attempt which does not work: RewriteRule ^(.*)%25(.*)$ $1%$2 [R=301] What it is supposed to do is: take everything before the %25 string and everything after it, concat those strings with a '%' in between, then redirect. With the example input URL the rule should rewrite to /display/INFO/How%25252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer followed by a redirect, then it should rewrite to /display/INFO/How%252bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer and again to /display/INFO/How%2bto%2525252breattach%2525252ba%2525252bdisk%2525252bto%2525252bXenServer and so on. Finally, after a lot of redirects I should have left /display/INFO/How%2bto%2breattach%2ba%2bdisk%2bto%2bXenServer which is a valid url equivalent to /display/INFO/How+to+reattach+a+disk+to+XenServer. My problem is that the expression does not match at all, so it does not even replace a single occurrence of %25. I understand that there is a limit in the number of redirects and I should really use the [N] flag however I don't even get the first step right.

  Read the article

• Having problems VPN'ing into our Windows server network.

  - by Pure.Krome

  Hi folks, When two people (on their notebooks) try to VPN to our office, only the first user gets a connection. the second user always times out. Is it possible for VPN to allow two or more people, using / sharing the same EXTERNAL PUBLIC IP to connect/authenticate? Now for some specifics (cause those two statements are very broad). I'm not in the IT Dept. I'm a developer. Our IT Dept don't really care (sigh) so it's up to me to fix this crap. Our office is all Microsoft shop stuff - servers and clients. We also have a firewall (watchguard brand?) and some other crazy setups (yes i know, it's very vague :( ). So i'm wondering - is it possible for multiple users, from the same public IP, to connect via VPN to a windows server? i'm under the impression - yes. But it is possible that this only happens when the clients (who are all behind the single, public IP .. otherwise they will have their OWN ip's) need to have UPnP running or something? this is killing me and i need to start asking the right questions cause these guys don't know what they are doing and i can't work without this happening. I know this is a vauge question with so many 'if-what's-etc' but maybe some questions/suggestions from you guys might start to lead to solving this problem. EDIT: Network Connection: WAN Miniport (PPTP)

  Read the article

• Windows-to-linux: Putty with SSH and private/public key pair

  - by Johnny Kauffman

  I spent about 3 hours trying to figure out how to connect to a linux box from my windows machine using putty without having to send the password. This is connecting to an Ubuntu server that is using OpenSSH. The private key is SSH-2 RSA, 1024 bits. I am connecting using SSH2. I have run into the more common problems already: Putty generated the public key in the "wrong format". I have corrected this (as seen on this blog post). However, since I am not yet connected, I cannot absolutely confirm that this file is in the correct format. The key is all on a single line now, and I have tried adding/removing line breaks at the end of the file. I've also tried the public file doctoring process a few times to ensure that I haven't flubbed up the manual conversion. Even so, I have no way to verify accuracy here. The permissions were at once point wrong as well, specifically meaning that the file had too many permissions. I had to solve this too and I know it got past this because I no longer see a related error in /var/log/auth.log. I've tried both authorized_keys and authorized_keys2 in case the server has an old version of OpenSSH, but this changed nothing. I do have access as a user. After this keyfile stuff fails, I can enter my password instead The only remaining nibble of information I have is that it claims I have the alleged password wrong: sshd[22288]: Failed password for zzzzzzz from zz.zz.zz.zz port 53620 ssh2 Even so, as far as I can tell, this is just a lazy try/catch somewhere, since I don't think there's a password involved at all. I see nothing else in any of the /var/log files of use. What else could be wrong?

  Read the article

• Windows Server 2008 ignores any change made to firewall

  - by Maurice Courtois

  I have been trying for the last 2 hours to make my Windows Server 2008 answer ping. I have tried almost every single solution I have found on the web, so far nothing work. My current setup: 2 NIC (1x Internet connection, 1x Local network) Server act as VPN server. So I set the corresponding NIC as either Public or Private. I also enable the rule for "File and Printer Sharing (Echo Request...)" for all Nic and from any IPs. I always been able to ping from the local network or the local ip while connected to the VPN. I also tried to create a specific rule for ICMP ping and disabling the firewall for all but the public nic. Regardless of all this, I still can't ping that server from Internet. Any idea suggestion what could cause this? I have the impression that when you set the server as VPN (I switch the box on when setting it up to block everything else than VPN connection) that changing anything to the firewall setting thought mmc is pointless !?!?

  Read the article

• Capabilities of business and SOHO routers

  - by Q8Y

  I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

  Read the article

• How to verify power provided to processors is clean

  - by GregC

  Once in a blue moon, I am seeing a blue screen of death on a shiny new Dell R7610 with a single 1100 Watt Dell-provided power supply on a beefy UPS. BCode is 101 (A clock interrupt was not received...), which some say is caused by under-volting a CPU. Naturally, I would have to contact Dell support, and their natural reaction would be to replace a motherboard, a power supply, or CPU, or a mixture of the above components. In synthetic benchmarks, system memory and CPU, as well as graphics memory and CPU perform admirably, staying up for hours and days. My questions are: Is power supply good enough for the application? Does it provide clean enough power to VRMs on the motherboard? Are VRMs good enough for dual Xeon E5-2665? Does C-states logic work correctly? Is there sufficient current provided to PCIe peripherals, such as disk controllers? P.S. Recently, I've gone through the ordeal with HP. They were nice and professional about it, but root cause was not established, and the HP machine still is less than 100%, giving me a blue screen of death once in a couple of months. Here's what quick web-searching turns up: http://www.sevenforums.com/bsod-help-support/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 It appears Dell has addressed the above issue by clocking PCIe bus down to 5GT/sec in A03 BIOS. My disk controllers support PCIe 3.0, meaning that I would have to re-validate stability. Early testing shows improvements. Further testing shows significant decrease in performance on each of the x16 slots with Dell R7610 with A03 BIOS. But now it's running stable. HP machine has received a microcode update in September 2013 SUM (July BIOS) that makes it stable.

  Read the article

• The best way to hide data Encryption,Connection,Hardware

  - by Tico Raaphorst

  So to say, if i have a VPS which i own now, and i wanted to make the most secure and stable system that i can make. How would i do that? Just to try: I installed debian 7 with LVM Encryption via installation: You get the 2 partitions a /boot and a encrypted partition. When booting you will be prompted to fill in the password to unlock the encryption of the encrypted partition, Which then will have more partitions like /home /usr and swapspace which will automatically mount. Now, i do need to fill in the password over a VNC-SSL connection via the control panel website of the VPS hoster, so they can see my disk encryption password if they wanted to, they have the option if they wanted to look at what i have as data right? Data encryption on VPS , Is it possible to have a 100% secure virtual private server? So lets say i have my server and it is sitting well locked next to me, with the following examples covered bios (you have to replace bios) raid (you have to unlock raid-config) disk (you have to unlock disk encryption) filelike-zip-tar (files are stored in encrypted archives) which are in some other crypted file mounted as partition (archives mounted as partitions) all on the same system So it will be slow but it would be extremely difficult to crack the encryption. So to say if you stole the server. Then i only need to make the connection like ssh safer with single use passwords, block all incoming and outgoing connections but give one "exception" for myself. And maybe one for if i somehow lose my identity for the "exeption" What other overkill but realistic security options are available, i have heard about SElinux?

  Read the article

• Acrobat 9 Pro - shortcut key failure

  - by Rick G

  I create numerous Acrobat PDF files from MS Word documents via Acrobat 9 Pro. I often need to print a single page from an Acrobat PDF file. I normally use the keyboard shortcut Control-P (Print Dialog) and ALT-U (current page). I recently set up a new PC with Windows 7, and this shortcut combination does not work. When I press ALT-U, it moves the highlight to the correct item, but does not select the radio button. If I press the Enter key, then I print the entire document instead of the current page - VERY annoying! It looks like there is an error in the design of the Print dialog for Acrobat. There are two items which have ALT-U as the keyboard shortcut. They are "Current page" in the Print range frame, and "Summarize comments". I have been able to use Control-P (Print Dialog) and ALT-U (current page) with no problems on virtual machines and older computers running Windows XP. Maybe I installed some software on the new PC that is messing up the keyboard shortcut. Is there any way to figure out the culprit - or is this a known problem with Acrobat?

  Read the article

• Inkscape: Copying an object, retaining transparency

  - by dpk

  I'm looking for a way to copy objects from one window to another without losing the surrounding transparency. I have two Inkscape windows. The setup is pretty simple. In the first window I draw a filled circle and a filled rectangle in it, with the circle set on top of the rectangle to show that the area around the circle is transparent (that is, you can see the rectangle "under" the circle, see screenshot 1, left). In the second window I just drew a filled rectangle (screenshot 1, right). When I copy the circle from window 1 to window 2 the transparency around the circle is lost (screenshot 2). I've verified that the backgrounds of the documents are 0% alpha/white. This is a rather contrived example but is readily reproducible. The real graphics I am working with have a bunch of objects all in a single group, but I have the same results. I feel like I'm missing something. The circle no longer behaves like a circle at its destination. Instead, it acts kind of like a bitmap. I'm definitely not using the bitmap copy feature.

  Read the article

• How to create a mysql database that can contain any character, also different languages

  - by Jakke

  I'm trying to create a database that has to contain articles in different languages. I'm using Mariadb as my server and I know bits of SQL. My knowledge doesn't really cover details like the differences between engines like MyISAM, InnoDB etc or character sets like utf8/16/32, latin 5/7/etc. I do know that the character set has importance, I guess what I'm looking for is an all-encompassing character set and an engine that best deals with this type of content. Also, is there an advantage in storing articles in multiple data rows (equivalent of different pages) to make things a little faster, or would you store a whole article in a single data row. Or does that depend on the size of the articles? Sorry for my noobish question, I know the information is all out on the internet but it would take me quite a long time to research and get a grip on everything. Would be cool if someone with experience could give me a little head start and point me in the right direction. This is for a intranet site, consider the content to be somewhat like a blog (and no, I don't want wordpress or something similar at this point). Not sure if it matters, but I tend to create and manipulate my tables with phpmyadmin, I use apache as web server and it all runs on Linux.

  Read the article

• Migrating to AWS Cloud with auto-scaling - where to put Redis and ElasticSearch?

  - by RobMasters

  I've been trying to research this topic but haven't found anywhere that recommends where to install services such as Redis and ElasticSearch when migrating to a cloud framework. I'm currently running a Symfony2 application on 2 static servers - one is running MySQL and the other is the public facing web server, which also has Redis and ElasticSearch running on it. Both of these servers are virtualised, but they're static in terms of not being able to replicate at present (various aspects are still dependent on the local filesystem). The goal is to migrate to AWS and use auto-scaling to be able to spin up and kill web servers as required, but I'm not clear on what I should put on each EC2 instance. Should they be single-responsibility only? i.e. Set up individual instances for the web server(s), Redis, and ElasticSearch and most likely an RDS instance for MySQL and only set up auto-scaling on the web server(s)? I don't foresee having to scale the ElasticSearch server anytime soon as it's only driving the search functionality, but it's possible that Redis may need to be replicated at some point - but should this be done manually? I'm not sure of how this could be done automatically as each instance needs to be configured to know about it's master/slave(s) as far as I know. I'd appreciate advice on this. One more quick question while I'm here - how would I be able to deploy code changes when there are X web servers currently active? I'm using a Capifony deployment script (Symfony2 version of Capistrano), which I think can handle multiple servers easily enough by specifying an array of :domain addresses...but how can should this be handled when the number of web servers can vary?

  Read the article

< Previous Page | 548 549 550 551 552 553 554 555 556 557 558 559  | Next Page >