Search Results

Search found 30871 results on 1235 pages for 'click ok'.

Page 553/1235 | < Previous Page | 549 550 551 552 553 554 555 556 557 558 559 560 | Next Page >

Problems with Intel Video Resolution on Acer Laptop Wide Display

- by ricstr

I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

Read the article
F# Simple Twitter Update

- by mroberts

A short while ago I posted some code for a C# twitter update. I decided to move the same functionality / logic to F#. Here is what I came up with. 1: namespace Server.Actions 2: 3: open System 4: open System.IO 5: open System.Net 6: open System.Text 7: 8: type public TwitterUpdate() = 9: 10: //member variables 11: [<DefaultValue>] val mutable _body : string 12: [<DefaultValue>] val mutable _userName : string 13: [<DefaultValue>] val mutable _password : string 14: 15: //Properties 16: member this.Body with get() = this._body and set(value) = this._body <- value 17: member this.UserName with get() = this._userName and set(value) = this._userName <- value 18: member this.Password with get() = this._password and set(value) = this._password <- value 19: 20: //Methods 21: member this.Execute() = 22: let login = String.Format("{0}:{1}", this._userName, this._password) 23: let creds = Convert.ToBase64String(Encoding.ASCII.GetBytes(login)) 24: let tweet = Encoding.ASCII.GetBytes(String.Format("status={0}", this._body)) 25: let request = WebRequest.Create("http://twitter.com/statuses/update.xml") :?> HttpWebRequest 26: 27: request.Method <- "POST" 28: request.ServicePoint.Expect100Continue <- false 29: request.Headers.Add("Authorization", String.Format("Basic {0}", creds)) 30: request.ContentType <- "application/x-www-form-urlencoded" 31: request.ContentLength <- int64 tweet.Length 32: 33: let reqStream = request.GetRequestStream() 34: reqStream.Write(tweet, 0, tweet.Length) 35: reqStream.Close() 36: 37: let response = request.GetResponse() :?> HttpWebResponse 38: 39: match response.StatusCode with 40: | HttpStatusCode.OK -> true 41: | _ -> false While the above seems to work, it feels to me like it is not taking advantage of some functional concepts. Love to get some feedback as to how to make the above more “functional” in nature. For example, I don’t like the mutable properties.

Read the article
placing h2 and h3 tags around words in paragraphs

- by sam

if i have a page like with an H1 heading and then just a long paragraph wraped in p tags, is it ok to write the paragraph as bellow (with the h tags mixed into the paragraph) and just style it so it looks all the same so that i get the benefit of using h2 and h3 tags ? Im aware this is not the 'proper' use of the H tags as their meant to be headings but can i use them like this as the site isnt built using mulitple headings on the same page (please ignore over optimization this is just for illitrative purposes) <h1>Red shoes</h1> <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus id dui id mi consectetur tincidunt. Mauris at sem non urna congue eleifend sed quis nulla. Aenean nisl porta eget auctor vel, semper eget massa.</p> <h2>Red shoes</h2> <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Phasellus id dui id mi consectetur tincidunt. Mauris at sem non urna congue eleifend sed quis nulla. Aenean nisl porta eget auctor vel, semper eget massa.</p> <h3>red shoes</h3> <p>Lorem ipsum.</p>

Read the article
DualLayout OpenSourceFood demo site installation instructions

- by svdoever

We released DualLayout which enables advanced web design with the power of SharePoint. DualLayout and a demo site can be downloaded from the DualLayout product page. This blogpost contains detailed instructions on installing the demo site. The demo site is based on the site http://opensourcefood.com. The demo site requires internet access because it still links to pages and resources of the real site. Execute the following steps to install the demo site: Copy the OpenSourceFoodDemo.zip file to your SharePoint Server 2010 Make sure that the zip file in “unblocked”, otherwise files are assumed from other computer (right-click on zip file, press “Unblock” button if available) Unzip the OpenSourceFoodDemo.zip to a folder of your choice (c:\OpenSourceFoodDemo) Open the SharePoint Start->Microsoft SharePoint 2010 Products->SharePoint 2010 Management Shell Change directory to the unzip folder (cd c:\OpenSourceFoodDemo) Start install script: .\InstallDemoSite.ps1 Answer the questions, default values in most cases ok. A little guidance: Question: Give credentials for the account that will be used for the application pool Answer: use for example same account as used for the application pool of your SharePoint site (lookup in IIS Manager) Question: Give credentials for the account that will be used for the application pool Answer: Use same account you are currently logged in with The demo site is made available through a backup and restore. The SharePoint Server 2010 installation must be patched to a level equal or higher to the update level on the SharePoint Server used to create the backup. If you get errors with respect to restore check http://technet.microsoft.com/en-us/sharepoint/ff800847.aspx for downloading the latest cumulative update.

Read the article
Dealing with the node.js callback pyramid

- by thecoop

I've just started using node, and one thing I've quickly noticed is how quickly callbacks can build up to a silly level of indentation: doStuff(arg1, arg2, function(err, result) { doMoreStuff(arg3, arg4, function(err, result) { doEvenMoreStuff(arg5, arg6, function(err, result) { omgHowDidIGetHere(); }); }); }); The official style guide says to put each callback in a separate function, but that seems overly restrictive on the use of closures, and making a single object declared in the top level available several layers down, as the object has to be passed through all the intermediate callbacks. Is it ok to use function scope to help here? Put all the callback functions that need access to a global-ish object inside a function that declares that object, so it goes into a closure? function topLevelFunction(globalishObject, callback) { function doMoreStuffImpl(err, result) { doMoreStuff(arg5, arg6, function(err, result) { callback(null, globalishObject); }); } doStuff(arg1, arg2, doMoreStuffImpl); } and so on for several more layers... Or are there frameworks etc to help reduce the levels of indentation without declaring a named function for every single callback? How do you deal with the callback pyramid?

Read the article
SEO + international sites? country.domain.com or domain.country?

- by Pure.Krome

Hi folks, is it better to have seperate country specific domains (which costs more money) or subdomains which define the country, for better SEO? eg. stackoverflow.com stackoverflow.com.au stackoverflow.co.uk vs stackoverflow.com au.stackoverflow.com uk.stackoverflow.com Assumption: int the search engine web master tools, each subdomain are associated to a country. eg. au.stackoverflow.com is associated to the country Australia. cheers! Update I understand that both methods do work, especially when i utilize the assumption, listed above. The question is about: Which method is better? Is there such a small SEO difference between them? Is the first method way way way better than the second with getting better SEO results? Update #2 A number of folks have suggested that the following is a good/better approach: stackoverflow.com/ stackoverflow.com/au stackoverflow.com/uk By adding a country specific iso code to the end of the url/the first folder of the domain can be recognised as the country. But a number of SEO mates have suggested that this is a valuable waste of folder level space. Er.. how can i explain. Ok, it's been suggested by some SEO experts that if the number of levels or folders in the domain exceeds 5 then the page drops dramatically in importance. Basically, you don't want to make it deep. As such, adding the country as the first level can be considered a waste, especially when it can be handled by the domain OR subdomain - hence the question :) So, any more thoughts on this? (Maybe SO is the wrong place to ask this question?)

Read the article
Oracle Launches Mobile Applications User Experience Design Patterns

- by ultan o'broin

OK, you heard Joe Huang (@JoeHuang_Oracle) Product Manager for Oracle Application Development Framework (ADF) Mobile. If you're an ADF developer, or a Java (yeah, Java in iOS) developer, well now you're a mobile developer as well. And, using the newly launched Applications User Experience (UX) team's Mobile UX Design Patterns, you're a UX developer rockstar too, offering users so much more than just cool functionality. Mobile Design Pattern for Inline Actions Mobile design requires a different way of thinking. Use Oracle’s mobile design patterns to design iPhone, Android, or browser-based smartphone apps. Oracle's sharing these cutting edge mobile design patterns and their baked-in, scientifically proven usability to enable Oracle customers and partners to build mobile apps quickly. The design patterns are common solutions that developers can easily apply across all application suites. Crafted by the UX team's insight into Oracle Fusion Middleware, the patterns are designed to work with the mobile technology provided by the Oracle Application Development Framework. Other great UX-related information on using ADF Mobile to design task flows and the development experience on offer are on the ADF EMG podcast series. Check out FXAer Brian 'Bex' Huff (@bex of Bezzotech talking about ADF Mobile in podcast number 6 and also number 8 which has great tips about getting going with Android and iOS mobile app development too.

Read the article
Calc direction vector based on destination vector and distance from enemy in AS3

- by Phil

I'm working on a zombie game in AS3 where I want a character to be able to move away from a zombie depending upon how close the zombie is. The character also has a destination that it's trying to get too on the screen. Ok so I have 2 vectors, one pointing to my destination, and one pointing to the zombie which I then invert to get my "away" vector. I then turn the distance between my character and the zombie into a value between 0 and 1. And then I'm stuck on how to get a resultant vector for my character. How would I use my 0-1 value to calculate how much of the away vector is used and how much of the original destination vector is still left if that makes sense? to end up with 1 direction vector to move my character? So if the zombie is right where my character is, then my direction vector = away vector, and if I'm far away from the zombie than my direction vector = destination vector, but how do I calculate the in-between? Ideally need the answer in AS3.

Read the article
Web Hosting Checklist

- by Chris

Hello, I am a web developer that is starting to look into hosting his own website. I would like to showcase my programming skills (PHP, MySQl, C#, Wordpress). My knowledge of languages I am OK with but the actually hosting site is where my knowledge starts to get a little shaky. I know the basics (bandwidth, sub-domains, re-write rules) but I would love your input, to help me formulate a check list of certain web-hosting services that I should be on the look-out for. Also I was wondering if there were any reliable hosting providers who give you the option to host both c# code-behinds and PHP code. As I would like to have two versions of my site, one in C# and one in PHP the hope is that if I need to look for another job this website will help me show possible employers my server side knowledge. I hope this is enough info, I did some researching online but found a bunch of unless articles and I've always have had luck on the StackExchange sites. So hopefully you, can help me. Thanks alot.

Read the article
Further question on Intel graphics driver

- by Thomas Byers

Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

Read the article
Saving Dragged Dropped items position on postback in asp.net [closed]

- by Deeptechtons

Ok i saw many post's on how to serialize the value of dragged items to get hash and they tell how to save them. Now the question is how do i persist the dragged items the next time when user log's in using the has value that i got eg: <ul class="list"> <li id="id_1"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_2"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_3"> <div class="item ui-corner-all ui-widget ui-widget-content"> </div> </li> <li id="id_4"> <div class="item ui-corner-all ui-widget"> </div> </li> </ul> which on serialize will give "id[]=1&id[]=2&id[]=3&id[]=4" Now think that i saved it to Sql server database in a single field called SortOrder. Now how do i get the items to these order again ? the code to make these sort is below,without which people didn't know which library i had used to sort and serialize <script type="text/javascript"> $(document).ready(function() { $(".list li").css("cursor", "move"); $(".list").sortable(); }); </script>

Read the article
Circle collision detection and Vector math: HELP?

- by Griffin

Hey so i'm currently going through the wildbunny blog to learn about collision detection, but i'm a bit confused on how the vectors he's talking about come into play QUOTED BLOG: p = ||A-B|| – (r1+r2) The two spheres are penetrating by distance p. We would also like the penetration vector so that we can correct the penetration once we discover it. This is the vector that moves both circles to the point where they just touch, correcting the penetration. Importantly it is not only just a vector that does this, it is the only vector which corrects the penetration by moving the minimum amount. This is important because we only want to correct the error, not introduce more by moving too much when we correct, or too little. N = (A-B) / ||A-B|| P = N*p Here we have calculated the normalised vector N between the two centres and the penetration vector P by multiplying our unit direction by the penetration distance. Ok so i understand that p is the distance each circle is penetrating each other, but i don't get what exactly N and P is. it seems to me N is just the coordinates of the 3rd point of the right trianlge formed by point A and B (A-B) then being divided by the hypotenuse of that triangle or distance between A and B (||A-B||) Whats the significance of this? Also, what is the penetration vector used for? It seems to me like a movement that one of the circles would perform to get un-penetrated.

Read the article
HTC Android device mounted as USB drive is read-only unless I'm root

- by Ian Dickinson

When I connect my HTC Incredible S to my Ubuntu 10.10 system as a USB drive, the device seems to mount OK, but is read-only unless I access it as root. For example, if I run nautilus, I can't drag and drop files to the SD-card in the phone, but if I run sudo nautilus I can. I have USB debug support set on the phone (Applications > Development > USB debugging) and I have added a rule for the device in /etc/udev/rules.d/51-android.rules on my Ubuntu system. Any suggestions as to how I can mount the drive so that I can copy content to the SD card without needing to sudo? Update Following advice from waltinator, I added the following line to my /etc/fstab: UUID=3537-3834 /media/usb1 vfat rw,user,noexec,nodev,nosuid,noauto However, the Android device is still being auto-mounted on /media/usb1 with uid and gid root. Update 2 syslog output: Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: mount -tvfat -osync,noexec,nodev,noatime,nodiratime /dev/sdd1 /media/usb1 Nov 21 23:38:40 rowan-15 usbmount[4352]: executing command: run-parts /etc/usbmount/mount.d

Read the article
about freelancer in third world countries

- by MaKo

hello guys, one question that is been bogging me... first of all I want to say that I actually come from a third world country, so I am all up for opportunities for everybody... so here comes my consideration,,, I have been working as a programmer for Iphone apps (noob in the company), now in my new "first" world country (immigration can be good!!!), but seem to be getting more and more advertisement from sites like freelancer.com etc,,, so I would want to know what do you think about all this???, would the jobs be getting cheaper?? if a project can be done by say 10% of the cost overseas, what is stopping the employers of doing just that? is it worth it? how about the quality? from a local job and overseas job? and all other aspects I cannot think about?? I just want to know if all this years of learning are going to pay off? or if in a near future all programming jobs will just go to cheaper labor? (sweat shops??) ok hope to make sense in my ramblings,, cheers;)

Read the article
Does Firefox Phishing Protection / Safebrowsing have any privacy implications?

- by Nowo

The current google results are outdated. What is the current status? I was on www.mozilla.org/en-US/legal/privacy/firefox.html and saw "Protection Against Suspected Forgery and Attack Sites Features". Can you translate please more to human speak? First they download a list and compare local... Ok... Here it gets messy "If there is a match, Firefox will check with its third party provider to ensure that the website is still on the blacklist. The information sent between Firefox and its third party provider(s) are hashed URLs. In fact, multiple hashed URLs are sent with the real hash so that the third party provider(s) will not know what site you are visiting." - If that hash were send to mozilla, they would knew which site were accessed? "In order to safeguard your privacy, Firefox will not transmit the complete URL of web pages that you visit to anyone other than Mozilla and its service providers." - In other words, Mozilla and its service providers get all complete URLs (of sites, which were in blacklist)? "While it is possible that a third party service provider may determine the actual URL from the hashed URL sent, Mozilla’s policy is to require [...]" - Privacy is depends on policy rather than technology?

Read the article
configuration issue with respect to .htaccess file on ubuntu

- by Registered User

I am building an application tshirtshop I have following configuration in /etc/apache2/sites-enabled/tshirtshop <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/tshirtshop <Directory /var/www/tshirtshop> Options Indexes FollowSymLinks AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> and following in .htaccess file in location /var/www/tshirtshop/.htaccess <IfModule mod_rewrite.c> # Enable mod_rewrite RewriteEngine On # Specify the folder in which the application resides. # Use / if the application is in the root. RewriteBase /tshirtshop #RewriteBase / # Rewrite to correct domain to avoid canonicalization problems # RewriteCond %{HTTP_HOST} !^www\.example\.com # RewriteRule ^(.*)$ http://www.example.com/$1 [R=301,L] # Rewrite URLs ending in /index.php or /index.html to / RewriteCond %{THE_REQUEST} ^GET\ .*/index\.(php|html?)\ HTTP RewriteRule ^(.*)index\.(php|html?)$ $1 [R=301,L] # Rewrite category pages RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2&Page=$3 [L] RewriteRule ^.*-d([0-9]+)/.*-c([0-9]+)/?$ index.php?DepartmentId=$1&CategoryId=$2 [L] # Rewrite department pages RewriteRule ^.*-d([0-9]+)/page-([0-9]+)/?$ index.php?DepartmentId=$1&Page=$2 [L] RewriteRule ^.*-d([0-9]+)/?$ index.php?DepartmentId=$1 [L] # Rewrite subpages of the home page RewriteRule ^page-([0-9]+)/?$ index.php?Page=$1 [L] # Rewrite product details pages RewriteRule ^.*-p([0-9]+)/?$ index.php?ProductId=$1 [L] </IfModule> the site is working on localhost and is working as if there is no .htaccess rule specified i.e. if I were to view a page as http://localhost/tshirtshop/nature-d2 then I get a 404 Error but if I view the same page as http://localhost/tshirtshop/index.php?DepartmentId=2 then I can view it. sudo apache2ctl -M Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) deflate_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) reqtimeout_module (shared) rewrite_module (shared) setenvif_module (shared) status_module (shared) Syntax OK What is the mistake if any one can point out in above configuration, or else I need to check any thing else?

Read the article
How to install Gyachi on ubuntu 12.10

- by Oguz Can Sertel

I would like to use Gyachi on ubuntu 12.10. I tried these steps but it doesn't work.. I wanted to compile it myself... but it need some libs... it made me confused... so I gave up sudo add-apt-repository ppa:adilson/experimental sudo apt-get update sudo apt-get install gyachi Thank you for your helps at first command the output: sudo add-apt-repository ppa:adilson/experimental You are about to add the following PPA to your system: Contains packages that are not in the official Debian/Ubuntu repositories and newer versions and snapshots which are not available yet in the repositories. Theses packages are experimental. Use them at your own risk. More info: https://launchpad.net/~adilson/+archive/experimental Press [ENTER] to continue or ctrl-c to cancel adding it gpg: keyring `/tmp/tmp3y3i7p/secring.gpg' created gpg: keyring `/tmp/tmp3y3i7p/pubring.gpg' created gpg: requesting key 27B81625 from hkp server keyserver.ubuntu.com gpg: /tmp/tmp3y3i7p/trustdb.gpg: trustdb created gpg: key 27B81625: public key "Launchpad Experimental Packages PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) OK and after sudo apt-get update; this is (sudo apt-get install gyachi)'s output here is the output: sudo apt-get install gyachi Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package gyachi

Read the article
Data Movement and the Decision Matrix

- by BuckWoody

Maybe it’s my military background, or maybe I’ve always had this predilection, but I like to use two devices when I need to make a complex decision: A checklist and a decision matrix. I like to use a checklist because it ensures that I remember the big bits of what I need to do, and brings up questions or areas that I didn’t think about when evaluating options for the decision. And the decision matrix – that’s the thing I use to actually lay out those options. It’s simply a spreadsheet-like grid (I use Excel, but paper and pencil works as well) that lays out the requirements or advantages for the decision across the top, and the options I have on the left-hand side. Then in the “cells” I put whether or not that option on the left will meet the requirement in that column. I then simply “weight” each cell to organize the choices by best-fit. The right answer (or answers) will float right to the top. I was asked yesterday about options for moving data in SQL Server to another system. There are just dozens of ways to do this, from bcp to Replication, each with certain advantages and costs. But asking the questions for the top row first helped me show the person that it isn’t a particular technology that is important, it’s laying out those requirements and thinking about which elements are more important than the other. For instance, is it more important to have the data moved all the time, or is it OK if that happens once in a while? Does the data have to move in two directions or just one? All of these will help that answer jump right out. Try it sometime – it’s a great learning exercise, since it will force you to focus on filling out the matrix. The answer is out there, Neo. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article
Genetic Algorithm new generation exponentially increasing

- by Rdz

I'm programming Genetic Algorithm in C++ and after searching all kind of ways of doing GA'a operators (selection, crossover, mutation) I came up with a doubt. Let's say I have an initial population of 500. My selection will consist in getting the top 20% of 500(based on best fitness). So I get 100 individuals to mate. When I do the crossover I'll get 2 children where both together have 50% of surviving. So far so good. I start the mutation, and everything's ok.. Now when I start choosing the Next generation, I see that I have a big number of children (in this case, 4950 if you wanna know). Now the thing is, every time I run GA, if I send all the children to the next generation, the number of individuals per generation will increase exponentially. So there must be a way of choosing the children to fulfill a new generation without getting out of this range of the initial population. What I'm asking here is if there is anyway of choosing the children to fill the new generations OR should I choose somehow (and maybe reduce) the parents to mate so I don't get so many children in the end. Thanks :)

Read the article
Which programming language should i choose? (much more info inside) [closed]

- by Andreas

I am not completely sure if this is the right place to put this question, but since it's the programming thread I guessed that there's many experienced programmers here. :) Ok, hello! My name is Andreas and I am a 16 years old guy from Norway. For some time now I've wanted to learn a programming language. Six months ago I started learning C++, but quit withing a week due to lack of motivation. The same thing happend only 2 months ago when I tried to learn Lua. I wanted to program mods to the game Garry's mod, and was really motivated. Then I stopped playing the game, and the programming stopped with it. Today though I am ready again. The only difference is that I am not completely sure what I want to do with the language. I only want to create something, and I miss the progress of failing and enduring hard work until I finally solve the problem I've worked on for hours. What I am trying to say is; Is there any program out there that allows me, a complete noob (I didn't learn that much in a week, so I like to call myself a beginner), to create apps, mods or something similar but at the same time being qualified as a first time language? I was thinking of Java, because Android, Minecraft and many other applications and games use it. But I've heard that it is going to be replaced by a program called HTML 5 (whatever that is), is this true? I certainly don't want to spend many hours of my life on something that is useless in a year or two. Hopefully I didn't make this too complicated. I know that it is hard to recommend something when I don't have a goal, but I really don't know what to say. Have a good day kind folks! - Andreas EDIT:* I did not know that this was an off topic question, really sorry!

Read the article
Suggestions to start a cross-platform project

- by Gabriele

I have a big project in my head, it should be cross-platform (Win, Max and Linux), online (Client - Server) and with 3D graphics. I would like some suggestions to start with the right things. Currently I'm a PHP/MySQL coder, I used to code in C and Pascal on DOS ages (Borland Times ;)), my C knowlegde need a refresh but it's ok. I guess C++ it's the right language. What platform and what i should use to code? I can choose from all three platforms. My idea was to use Visual Studio 2010 C++, but i'm not sure if it support Native code. What kind of libraries should i use? I guessed OpenSSL for the login, OpenGL for graphics part. For the Audio or the GUI? Any other suggestions are well accepted. I know it's a "BIG DEAL" but I have no rush and it'll be a free-time project, only for my pleasure. Thank you in advance.

Read the article
Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

- by Giuseppe Della Corte

I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

Read the article
Wrong resolution for Lightdm/GDM on Ubuntu 13.04 using HDMI

- by f03lipe

I've tried all the solution I could find on the matter so far, but the error persists. My problem is that the login screen (both under gdm and lightdm) runs with the wrong resolution, even though all is fine when I log in. The error occurs solely when I have my HDMI cable connected to my other screen. The login screen resolution becomes 1024x768 (for my 1366x768 laptop screen) and mirrored on my screen, which is 1920x1080. I've had this issue on version 12.04 (the last one before I upgraded to 13.04), but I got it fixed by adding the xrandr commands on the begining of the /etc/gdm/Init/Default file. This doesn't seem to work anymore. I've also tried telling lightdm to run a script fixing the resolution with xrandr (by editing /etc/lightdm/lightdm.conf), but lightdm crashes, and I'm forced to log in with low graphic settigs. Hint: when ubuntu is loading, the resolution starts OK, then goes bad right before the login screen is initialized. Does that mean that there's nothing wrong with my graphic cards? What do you think? Cheers!

Read the article
Selling an open source project: some issues

- by Sander

I am the creator / main developer of a small sized open source (PHP) project (GPL3). Currently there is a development team of 3 people (me included). This team has been quite active for some time, but since almost 2 years not much has happened. I myself have decided I want to stop working on the project, but I can't just leave the project because I care about it and I know if I abandon it, it will just be a matter of time before the project completely dies. At this moment, there are still some users and the project is only slightly out-of-date. So I'm thinking about selling the whole project. Of course I'd need to get consent of the other developers, but for now I'm assuming that's not a big problem. So at this moment I have 2 questions: 1) If the project would be sold to a commercial party, would it be possible for them to convert the project to closed source? I would prefer to sell the project to a company/organization that would continue the development under an open source license. 2) Does anyone have any tips to find interested parties? I don't know if I just want to put up a "For Sale" sign on the website of the project. Maybe someone has experience with a comparable situation. Ok guys, thanks in advance!

Read the article
OS choice for functional developing

- by Carsten König

I'm mainly a .NET developer so I normaly use Windows/VisualStudio (that means: I'm spoiled) but I'm enjoying Haskell and other (mostly functional) languagues in my spare time. Now for Haskell the windows-support is ok (you can get the Haskell-Platform) but latley I tried to get a basic Clojure/Scheme environment set up and it's just a pain on windows. So I'm thinking about trying out another OS for better tooling and languague support. Of course that leaves me with MacOS or some Linux distribution. I never used MacOS before and of course Linux would be cheaper (free) and I don't think I can parallel-boot MacOS on your normal PC-Hardware (can you?). PLUS: I don't have a clue about the tools you can use on those (to me) forign OSs. To make it short: I want to explore more Haskell, Clojure, Scala, Scheme and of course need at least good tooling for JavaScript/HTML5/Css. Support for .NET/Mono/F# would be great but for this I will still have my Win7 boot. So I like to know: - what is your prefered OS, Distribution (is Ubuntu viable?) - what Editor/IDE are you using Thank you for your help! PS: I'm not sure if this is the right place for this question but I surely hope so - if not please let me know where I should move this to (StackOverflow don't seem to be the right place IMHO)

Read the article

< Previous Page | 549 550 551 552 553 554 555 556 557 558 559 560 | Next Page >