Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 554/1106 | < Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >

• Keyboard and touchpad do not work

  - by user289219

  I have an Lenovo IdeaPad S210 Touch and I want to install Ubuntu on it. The problem is that when I try booting the system from a USB drive (starting the so-called Live session) to try to see if the system works on my computer, the system will turn on and everything will work properly except for the keyboard and the touchpad. Neither of them are listed when using this command: xinput --list. I cannot get my laptop keyboard/touchpad to work, but USB keyboards and mice will work and my laptop's touchscreen will also work.

  Read the article

• How can i modify my Grub 1.99 configurations to install a new kernel?

  - by abhi

  I have configured kernel 3.2.x and made some changes in the kernel. I have compiled it and have the compiled image of the kernel with me. The problem i am facing is as in how to modify the boot loader Grub 1.99 in my case, so that i can boot through the new kernel i have compiled. I looked on net for any tutorials but all of them talked about older versions of Grub ? Can someone please give some info or point me towards some resource ? Currently i have compiled my new custom kernel image and have copied it to /boot.

  Read the article

• ProStar gaming laptop, which had Ubuntu 10.10, won't boot past Grub. Thoughts?

  - by Richard Zak

  At work we have some high-end gaming laptops we use for their dual GPUs. The machines have second generation i7 CPUs, and came with Windows 7. On most of them I installed Ubuntu 10.10, and all was fine. There were two laptops that I wanted to repurpose and wanted to reinstall the OS. It boots the CD (burned Ubuntu installation CD, I've tried 10.10, 11.10, and 12.04, as well as CentOS 6), and when Grub tried to boot the kernel, I just get a cursor blinking in the upper left corner of the screen. I tried the disabling of ACPI and the other items in the advanced menu, but nothing works. I could still boot to the current Linux installation though. I was able to install Windows 7 again, and use WUBI, but I think that works because it uses the Windows bootloader and not Grub. How could it have worked before and not now? I have confirmed that the CD is fine, as are the hard drive and CD drive. I also had the same problem with Debian, and had to boot through Windows 7 to install it.

  Read the article

• What ports should I open for listen and/or transmit in my firewall to keep internet ok?

  - by H_7

  What are the minimum ports and services that should I allow/open for listen and/or transmit in my firewall (I am using Firestarter) to keep my internet running ok? Some talk about what services, which port uses, and why it matters should be nice too. Thanks for any advice. I have some bet to the answer 80 http 443 https 53 dns EDIT: I will just browse some sites. I have a windows virtual machine, so I ll use it too, bu t just normal navigation too. No torrents, IRC's, FLASH, etc.. Thanks for attention. hmmm... lost! Linux Mint 9 here.

  Read the article

• Weekend Project: Build a Fireball Launcher

  - by Jason Fitzpatrick

  What’s more fun than playing with fire? Shooting it from your hands. Put on your robe and wizard hat, make a stop at the hardware store, and spend the weekend trying to convince your friends you’ve acquired supernatural powers. Over at MAKE Magazine, Joel Johnson explains the impetus for his project: A stalwart of close-quarter magicians for years, the electronic flash gun is a simple device: a battery-powered, hand-held ignitor that uses a “glo-plug” to light a bit of flash paper and cotton, shooting a fireball a few feet into the air. You can buy one from most magic shops for around $50, but if you build one on your own, you’ll not only save a few bucks, you’ll also learn how easy it is to add fire effects to almost any electronics project. (And what gadget couldn’t stand a little more spurting flame?) The parts list is minimal but the end effect is pretty fantastic. Hit up the link below for the full build guide, plenty of warnings, and a weekend project that’s sure to impress. How to Own Your Own Website (Even If You Can’t Build One) Pt 3 How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2

  Read the article

• Install lubuntu on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

  Read the article

• Why would video stutter on HDMI but not on DVI?

  - by CorvT

  I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

  Read the article

• dpkg returns error 10 when processing package php5-common

  - by Jesse

  I'm having trouble installing php in 13.04. Seems like the package manager can't (re)configure the php package. I already tried purging every php* package, removing the cache files in /var/cache/aptbut and other solutions I've found but nothing seems to work. Here's the error output: $ sudo dpkg --configure -a Setting up php5-common (5.4.9-4ubuntu2.3) ... dpkg: error processing php5-common (--configure): subprocess installed post-installation script returned error exit status 10 Errors were encountered while processing: php5-common sudo apt-get install -f sudo apt-get install php5-common php5 they all return the same error. How can I fix this?

  Read the article

• recover from sudo rm -rf command

  - by user106116

  By mistake, I ended up executing "rm -rf /" command from sudo on my laptop which erased many files before it stopped. Now when I restarted my system , it gives a GRUB rescue prompt. I am having dual boot with Ubuntu 12.04 and Windows 7 I request the help for following: How do I fix the currently installed Ubuntu without overwriting/erasing the left over files (from rm -rf command)? Is using Boot-Repair safe ? Is there a way to directly go to Windows 7?

  Read the article

• How can I allow a user to stream my videos securely?

  - by John Baber

  I've got a script that records 10 minute videos from a webcam to video1.mp4 video2.mp4 video3.mp4 video4.mp4 Then records over video1 again in rotation. I'd like one user to be able to view these in winamp or itunes by having a playlist with the four of them on repeat. (This is my way of getting around the many hours of figuring out how to actually livestream from a webcam with VLC). I don't see any examples of things like icecast being used for video, and I don't see any mentions of secure streaming. My question is, is there any way to have these videos be seen securely? I can do things like https on my server, but I don't have great access to the user's machine, so just sharing a directory by samba or sshfs isn't much of an option.

  Read the article

• how to switch beetween users using kde,gnome and unity without enter everytime password only on kde?

  - by user49523

  i can switch between users after login in with them with gnome and unity without typing again the password but i have to type again with kde .. so can i switch from gnome or unity to kde without typing again the user password? ..and, it is possible to start ,from shutdown computer, login with 3 different users using gnome,kde and unity? and it is possible to open kde,gnome and unity with the same user without log out ? (this is only to have 1 user instead of 3)

  Read the article

• Super Key doesn't work on Kubuntu 12.04

  - by zigma80

  I have Kubuntu 12.04 installed on HP 430 Notebook PC. My problem is that when I press Super Key, nothing happened. Some of my Fn keys did not work either. I have changed the Keyboard Model in System SettingsHardwareInput DevicesKeyboard to Hewlett Packard Internet keyboard but doesn't seems to help. I have also Compiz-Config-Setting-Manager installed but I don't know how to make the right keyboard setting. I would like to have the Super Key launch Start Menu Launcher as in MS-Windows, is it possible ... Thanks for the help

  Read the article

• Compiling on the desktop!! no?

  - by simon

  so I have compile my first program today, with the help of the "askubuntu's members"..... thanks so much!!! ;) this is what I have compiled : https://github.com/treeder/logitech_unifier But now, I have some question: 1- I have compiled my file on the desktop I have though it was easier first, but I never though it would create a file on my desktop...... so what do you guys do with the file created by the compilation? I don't think I need it anymore.... so do I delete it? or do I keep it? Is there a folder I should specificaly use for compiling? thanks for answering those newbies question.

  Read the article

• Does the Ubuntu One sync work?

  - by bisi

  I have been on this for several hours now, trying to get a simple second folder to sync with my (paid) account. I cannot tell you how many times I removed all devices, removed stored passwords, killed all processes of u1, logged out and back in online...and still, the tick in the file browser (Synchronize this folder) is loading and loading and loading. Also, I have logged out, rebooted countless times. And this is after me somehow managing to get the u1 preferences to finally "connect" again. I have also checked the status of your services, and none are close to what I am experiencing. And I have checked the suggested related questions above! So please, just confirm whether it is a problem on my side, or a problem on your side. EDIT: In the mean time, here is what has changed, on top of what is mentioned just above. • My files went from 0MB to 71.9MB, and is still rising. • My first folder of 400.2MB is being filled with the data as I write this. The second folder has the folder sub-structure in place. • Both folders now show in the File Browser that it will be synchronized. I believe that right now, it is all back to normal and working fine, and I guess that's what a good night's sleep can do ;). And we're now only back to the point where synchronizing is slow, but will pick up with the release of Natty (https://wiki.ubuntu.com/UbuntuOne/FAQ/WhyIsItTakingSoLongForMyFilesToSync). But to get to the questions: My about says I use 11.04, Natty Narwhal, but I am quite sure the last distribution I installed was 10.10. Folder A is 400.2MB, and Folder B is 29.5MB I am on a DSL line, behind a regular fritz.box setting. No proxy servers in use, and I did not install any particular firewall features. No physical firewall, just the router (on which I have a TV signal as well), and 2 switches to get to this floor. Status: inactive The ubuntuone-indicator runs the same window as when I click on my name on the top-right corner and select Ubuntu one, or in the Control Center choose Ubuntu one. It wasn't supposed to go further than this was it?

  Read the article

• /usr/share/zoneinfo when does the system time actually change?

  - by Steven Brown

  Please correct me if I am wrong here.... When I change my system clock this changes the file /usr/share/zoneinfo immediately, HOWEVER, the actual system time doesn't change until the next reboot because /etc/localtime then re-reads /usr/share/zoneinfo? I have seen behaviour similar to the above, whereby /usr/share/zoneinfo/ was accessed but the system time did not change until after the system had rebooted

  Read the article

• Pantech Link II, Ubuntu and Virtual XP

  - by user85041

  Okay this is my problem. I have a Pantech Link II, dmesg states: [ 896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 896.260039] usbcore: registered new interface driver cdc_acm [ 896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg: [ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized. [ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0 [ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293074] /dev/vmnet: port on hub 8 successfully opened [ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293094] /dev/vmnet: port on hub 8 successfully opened [ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446316] /dev/vmnet: port on hub 8 successfully opened [ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446334] /dev/vmnet: port on hub 8 successfully opened [ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1127.743034] NET: Registered protocol family 39 [ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4). [ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110 [ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 lessa@X:~$ dmesg|tail [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

  Read the article

• messed up PATH and can't login

  - by Ben Glasser

  I was screwing around and trying to add some environment variables to my path. I must have made a type or something because once I logged out, I could not lob back in. I know I'm not on caps lock or anything and in fact if I type the wrong password I am informed of this. However, when I type the correct password the desktop starts to load and then loops back to the login prompt. There also no other users on the machine for me to log in as other than guest which does not have the right permissions for me to fix things. Any ideas on where to go from here?

  Read the article

• Fingerprint driver issue hp Pavillion dm4

  - by user108226

  I need a fingerprint scan driver for Pavilion dm4 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0a5c:21e3 Broadcom Corp. Bus 001 Device 004: ID 138a:0018 Validity Sensors, Inc. Bus 002 Device 003: ID 10f1:1a2e Importek

  Read the article

• Remove encryption from USB flash drive

  - by Timic

  It all started when I was attempting to format my PNY USB drive because it was full of junk. When it asked me what type of file system, I selected FAT but there was a checkbox below that said "Encrypt" and I accidently checked it and continue. I had no choice but to come up with a passphrase for it, and so I did, thinking I was able to remove that encryption. But after that at Disk Utility I thought I would find a "Remove Encryption" button or something like that but I didn't. I tried formatting it to remove the encryption but it gives me an error: Error Formatting, The device is busy" Detail>>> One or more block devices are holding /dev/sdb/. I am stuck, what should I do?

  Read the article

• Pppoe wireless connection, Ubuntu 12.4

  - by Barbara

  I recently bought a new computer (Asus 1015 cx) with Ubuntu (12.4) as preinstalled system. My problem is with the internet. The computer connects just fine to the free wifi we have at home, but in college, we have a little bit different system. There is wifi, but it is not free - everyone receives a user name and a password. I cant manage to estabilish this Pppoe connection - the computer "sees" where can it connect, but I dont know where to write my username and password. It is not the DSL connection, what I have already tried. Can you help me?

  Read the article

• Package dependencies cannot be resloved?

  - by Hayden Win

  i was in the ubuntu software center, and when i try to install something like OpenJDK, i get an error saying: Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. When i click on "Details" it shows this: The following packages have unmet dependencies: openjdk-6-jre: Depends: openjdk-6-jre-headless (>= 6b24-1.11.1-4ubuntu2) but 6b24-1.11.1-4ubuntu2 is to be installed Depends: libjpeg8 (>= 8c) but 8c-2ubuntu7 is to be installed Depends: libpulse0 (>= 1:0.99.1) but 1:1.1-0ubuntu15.2 is to be installed How do i fix this, and what's caused this problem in the first place?

  Read the article

• Wake up from sleep with GPIO (I2C)

  - by spambas

  My situation: Ubuntu 10.10 running on an atom driven main board the main board has a GPIO chip integrated (F75111 by Fintek). They communicate through I2C(SMBus). We have a driver running that works, we can send outputs and read inputs. Great! We would like to use the I/O interface to suspend (sleep) and wake up again. Sleep is no problem. On an incoming input: run s2both. Ubuntu goes to sleep and prepares a hibernate state, so when the power-cord is unplugged by accident, it will wake from hibernate. But the big question: how to wake on an input if the OS is already sleeping! You can wake from a lot of devices (lan, usb, ring, etc) but I can't find out how to wake from a I2C card. PLEASE HELP!

  Read the article

• How to uninstall Ubuntu 12.04 LTS dual booting with Windows 7?

  - by user103799

  I need to uninstall Ubuntu 12.04 LTS from my laptop. It's currently dual booting with windows 7. I've searched and found some ways to do this, but all use some kind of a CD to complete the deletion. I have neither the Ubuntu Live CD nor Windows Install CD/Recovery CD. This laptop did not come with one, and I unfortunately have no available storage device to make a recovery CD. Is there a way to completely uninstall Ubuntu 12.04 LTS dual booting without using any hardware? If there's no way, then how to uninstall using the least hardware possible? Or easy to find hardware? I've nothing against Ubuntu. I installed this as a backup/alternative to error-prone Windows 7. However, after a hardware upgrade, including extra RAMs and a new, better CPU, Windows 7 runs smoothly again. Now I'm running low on hard drive space and need the 40 gig or so of space I partitioned for Ubuntu back. Any help is appreciated, and thanks in advance!

  Read the article

• my web cam not working prperly in skype 12.04

  - by elvin

  oller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 01) This is the configuration of my web cam when i typed lspci in terminal; how do i find out what type of cam it is. the command letters i wrote here may be wrong.never mind i wrote from my memory.my web cam shows green colour shade and no proper colour.pls help me to fix this problem.2nd option- if i buy microsoft web cam will the image will get corrected.i think my web cam is hyundai electronics make.

  Read the article

• How do I set the correct monitor resolution with Nvidia drivers for a monitor that does not send EDID?

  - by Torben Gundtofte-Bruun

  I keep having trouble getting the correct monitor resolution - every time I reinstall, I happen to use a newer Ubuntu release and the old tricks I used to know no longer work. Instead of leaving a long trail of questions for every new release, I am looking for a more universal and timeless solution. What's the correct way to set the correct monitor resolution with an Nvidia GPU for a screen that does not send EDID values? Note: This is a "dummy" question -- with the help from the chat, I already found the answer, and I am now going to add my own answer to document a solution that is hopefully universal.

  Read the article

< Previous Page | 550 551 552 553 554 555 556 557 558 559 560 561  | Next Page >