Search Results

Search found 18160 results on 727 pages for 'jdk 7 feature complete'.

Page 555/727 | < Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >

• Moving an external hard drive while running

  - by user1108939

  I mean physically moving the drive around. I've never dealt with external hard drives before. Just plugged this wd mypassport to test the transfer rate. At one point I 'safely ejected' the drive. A minute later I decide to check the underside of the drive, not realizing the disk is still spinning. I lift the drive, rotating my writs about 70 degrees to the left... I hear a sequence of three high pitched sounds. I couldn't determine whether that was an indication beep by an internal security feature or the head scratching the plate (oh god...). Drive stops and usb power is disconnected. I reconnect it - it shows up fine - reads/writes. The drive was not reading/writing when i moved it. Did I damage my drive? Are these things that fragile? I thought them to be at least as durable as a standard 2.5" internal drive. Am I mistaken?

  Read the article

• Can my employer force me to backup my personal machine? [closed]

  - by Eric B

  Here's the background: Approximately 1.25 years ago, the company I work for was acquired by a larger 400 person company. Before acquisition (and today still) we are all remote employees using our own personal hardware for work-related duties (coding, email, etc). We are approximately 15 employees within the larger organization. Some time after acquisition, the now owning company was slapped with a civil lawsuit. Part of this lawsuit (discovery) is requiring them to retrieve & store from us any related information. Because we were a separate company up until acquisition, there is a high probability that our personal machines might contain information about what the lawsuit alleges (email, documents, chat logs?, etc). Obviously, this depends largely on the person's job function (engineer vs. customer support vs. CEO). All employees are being required to comply. Since acquisition (1.25 yrs), the new company has not provided us with company laptops/desktops. We continue to use personal hardware, licenses, etc for work. Email is via POP3s and not hanging around on the mail server - it's on everyone's client. Documents are spread across personal machines. So, now they want us each to backup our complete personal machines. They are allowing us to create a "personal" folder where we can place personal documents. That single folder will be excluded from backup. Of course, that means total re-arrangement of documents, etc. For most of us, 99% of the data on the machine is NOT related to work. So, what's the consensus? Should we comply? What is their recourse if we do not?

  Read the article

• rsync --remove-source-files but only those that match a pattern

  - by user28146

  Is this possible with rsync? Transfer everything from src:path/to/dir to dest:/path/to/other/dir and delete some of the source files in src:path/to/dir that match a pattern (or size limit) but keep all other files. I couldn't find a way to limit --remove-source-files with a regexp or size limit. Update1 (clarification): I'd like all files in src:path/to/dir to be copied to dest:/path/to/other/dir. Once this is done, I'd like to have some files (those that match a regexp or size limit) in src:path/to/dir deleted but don't want to have anything deleted in dest:/path/to/other/dir. Update2 (more clarification): Unfortunately, I can't simply rsync everything and then manually delete the files matching my regexp from src:. The files to be deleted are continuously created. So let's say there are N files of the type I'd like to delete after the transfer in src: when rsync starts. By the time rsync finishes there will be N+M such files there. If I now delete them manually, I'll lose the M files that were created while rsync was running. Hence I'd like to have a solution that guarantees that the only files deleted from src: are those known to be successfully copied over to dest:. I could fetch a file list from dest: after the rsync is complete, and compare that list of files with what I have in src:, and then do the removal manually. But I was wondering if rsync can do this by itself.

  Read the article

• How to turn off the display in Windows 8 without locking or making computer go to sleep?

  - by darshshah

  How to turn of the display in Windows 8 without locking or making computer go to sleep ? The problem is that when I enable ‘Turn off display after x minutes’ feature from control panel, the device goes into sleep after ‘x’ minutes. It seems that both the options – turn off display/put computer to sleep are connected. It devices goes automatically to sleep mode as soon as the display is turned off. So, is there any method to turn off the display of the device without it going into sleep mode ? Someone wrote in the microsoft forum " The whole key to this problem seems to be the "Turn off the Display" setting. If you have that set to 5 minutes, 10 minutes, 15 minutes, etc...the computer will go to sleep one minute after you lock the screen. With this setting set to "Never", it doesn't do it. So something is wrong there." I want to turnoff the display but don't want to lock the device. Is that also possible ? Thanks

  Read the article

• Is there a simple context-menu add-in that could make-up for the Windows-7 status bar deficiency?

  - by DanO

  Edit: I initially asked about free disk space and selected item size. It has since been pointed out that the selected item size summary is still availiable natively in the details pane. I had read elsewhere (wikipedia) that this was removed along with disk free space, which is not the case. Only free disk space has been completely removed. Selection size is still availiable. Is there a context menu add-in out there that could show the free disk space of the relevant drive, when you right click? This would go a long way to compensating for one of the only steps backward I’ve discovered in Windows 7 so far. I doubt anyone had created one specifially for this need before windows 7 because this information was previously easily accessible in the status bar. I thought about creating one, but it has been a while since I have messed with the Shell API, and I know there are coders out there who could do it faster and better. If you’ve heard of one, or know of something else to make-up for this Microsoft misstep, I’d appreciate hearing about it. If MS were listing to the community they would already have a powertoy or add-in of some kind to un-break this. (they could release it unsupported even), as there seem to be many power users that are extremely annoyed by this feature removal decision. If anyone has seen something, please post it here. As it has been only 4 days since official Windows 7 release, I'll wait at least a week to chose an answer. Here's a picture of protoype screenshot: SU question 19232 is related.

  Read the article

• amazon ec2-medium apache requests per second terrible

  - by TheDayIsDone

  EDITED -- test running from localhost now to rule out network... i have a c1.medium using EBS. when i do an apache benchmark and i'm just printing a "hello" for the test from localhost - no database hits, it's very slow. i can repeat this test many times with the same results. any thoughts? thanks in advance. ab -n 1000 -c 100 http://localhost/home/test/ Benchmarking localhost (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Apache/2.2.23 Server Hostname: localhost Server Port: 80 Document Path: /home/test/ Document Length: 5 bytes Concurrency Level: 100 Time taken for tests: 25.300 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 816000 bytes HTML transferred: 5000 bytes Requests per second: 39.53 [#/sec] (mean) Time per request: 2530.037 [ms] (mean) Time per request: 25.300 [ms] (mean, across all concurrent requests) Transfer rate: 31.50 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 7 21.0 0 73 Processing: 81 2489 665.7 2500 4057 Waiting: 80 2443 654.0 2445 4057 Total: 85 2496 653.5 2500 4057 Percentage of the requests served within a certain time (ms) 50% 2500 66% 2651 75% 2842 80% 2932 90% 3301 95% 3506 98% 3762 99% 3838 100% 4057 (longest request)

  Read the article

• Conflicts with file from package mysql-5.0.77

  - by Whiteyq

  I'm trying to install APC (Alternative PHP Cache) on a CentOs dedicated server. I've everything done apart from configuring phpize. Running :yum -y install php-devel gives me the following error file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.57-1.el5.art.x86_64 conflicts with file from package mysql-5.0.77-4.el5_5.3.i386 etc etc for other languages So, i think the mysql version i have is too old & i more than likely need to upgrade mysql to version 5.1. Im reluctant to do this as a) its a live server (although only 3/4 domains) b) ive read ill read to recompile php if i upgrade To add to this i have plesk installed for managing domains & might need reinstalling/reconfiguring also. sorry for the long intro but its my first post & best to give as much info as possible, so my question is basically Is there any way i can run :yum -y install php-devel to get phpize working to complete installation of APC for the version of mysql i currently have installed? ie 5.0.77

  Read the article

• How to chain GRUB2 for Ubuntu 10.04 from Truecrypt & its bootloader (multi boot alongside Windows XP partition)?

  - by Rob

  I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back. I've searched fairly extensively for answers on Ubuntu forums and elsewhere but have not yet found a complete answer that covers all eventualities, scenarios and error messages, or otherwise they talk of legacy GRUB and not GRUB2. Ubuntu 10.04 uses GRUB2. My setup: Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb Ubuntu / (root) - main filesystem (20gb) NTFS share, 55Gb I know that the Truecrypt boot loader replaces the GRUB when boot up because I've already tried it on another laptop. I want boot loader screen to look something like the usual: Truecrypt Enter password: (or [ESC] to skip) password is for WindowsXP and on pressing [ESC] for it to find the Ubuntu grub to boot from Thanks in advance for your help. The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.

  Read the article

• GA-P55A-UD4 SYSFAN 2 problem....

  - by Vit

  Hi, I have some strange problems with the mobo in title. I have two fans connected to SYSFAN 1 and 2. Both are the same temp regulated Arctic Cooling F12. They are regulated thru temp sensor which is in different cable from fan. It connects to the 3 pin. So, I connected them to SYSFAN 1 and 2 MB ports. The problem is, when PC starts, the fan connected to SYSFAN 1 spins nice and is reporting speed to BIOS. But second fan connected to SYSFAN 2 starts to spin, than stops. I tried to warm the sensor with no help. Also, in BIOS I found no feature about SYSFAN 2 mode or something. I tried the fan itself by connecting it to PWR fan connector and it works fine. But obviously I want it to operate in SYSFAN 2. Please if you have any advice, help. Thanks.

  Read the article

• Non-volatile cache RAID controllers: what kind of protection is there against NVCACHE failure?

  - by astrostl

  The battery back-up (BBU) model: admin enables write-back cache with BBU writes are cached to the RAID controller's RAM (major performance benefit) the battery saves uncommitted and cached data in the event of a power loss (reliability) If I lose power and come back within a day or so, my data should be both complete and uncorrupted. The downside to this is that, if the battery is dead or low, OR EVEN IF IT IS IN A RELEARN CYCLE (drain/charge loops to ensure the battery's health), the controller reverts to write-through mode and performance will suffer. What's more, the relearn cycles are usually automated on a schedule which may or may not happen in the middle of big traffic. So, that has to be manually disabled and manually scheduled for off-hours if it's a concern. Annoying either way. NV caches have capacitors with a sufficient charge to commit any uncommitted-to-disk data to flash. Not only is that more survivable in longer loss situations, but you don't have to concern yourself with battery death, wear-out, or relearning. All of that sounds great to me. What doesn't sound great to me is the prospect of that flash module having an issue, though. What if it's completely hosed? What if it's only partially hosed? A bit corrupted at the edges? Relearn cycles can tell when something like a simple battery is failing, but is there a similar process to verify that the flash is functional? I'm just far more trusting of a battery, warts and all. I know the card's RAM can fail, the card itself can fail - that's common territory, though. In case you didn't guess, yeah, I've experienced a shocking-to-me amount of flash/SSD/etc. failure :)

  Read the article

• Global Email Forwarding with EXIM?

  - by Dexirian

  Been trying to find a solution to this for a while without success so here i go : I was given the task to build a High-Availability Load-Balanced Network Cluster for our 2 linux servers. I did some workaround and managed to get a DNS + SQL + Web Folders + Mails synchronisation going between both. Now i would like my server 2 to only do mailing and server 1 to only do web hosting. I transfered all the accounts for 1 to 2 using the WHM built-in account transfert feature. I created 2 different rsync jobs that sync, update, and delete the files for mail and websites. Now i was able to successfully transfer 1 mail accounts from 1 to 2, and the server 2 works flawlessly. All i had to do was change the MX entries to point to the new server and bingo. Now my problem is, some clients have their mail softwares configured so that they point to oldserver.domain.com. I cant make the (A) entry of oldserver.domain.com point to the new server for obvious reasons. I thought of using .foward files and add them to the home directories of the concerned users but that would be very difficult. So my question is : Is there a way to configure exim so that it will only foward mails to the new server? I need to change all the users so they use their mail on server 2 without them doing anything. Thanks! EDIT : TO CLARIFY MY PROBLEM Some clients have their mail point to oldserver.xyz instead of mail.olderserver.xyz I want to know if i can do something to prevent modifying the clients configuration I would also like to know is there is a way to find out what clients aren't properly configured

  Read the article

• How can I import tasks into Project that have already been started?

  - by unknown

  I am writing a feature to import tasks from an online bug tracking / project management tool into Microsoft Project, primarily for resource leveling. Currently I am importing all tasks in as Fixed work, and giving them an assignment to a single resource for 100% of the work. The duration is then dynamically calculated, which at import time is equal to the amount of work. However, I am not a project manager by any means, and am having difficulty on how to get the start dates to calculate correctly. I've never used Project either. I am using Schedule From Start and setting the Project Start Date to the date the contract was signed / work was approved. However, this can be in the past, and I do not want current tasks scheduled from that date. Should it be today then? Another problem I have is with tasks that were already started. I have remaining work set, and I was placing a constraint on them to be started on the day the work was first applied. However, the remaining work for the task would be scheduled from that date, which was sometimes in the past. Using task constraints, a project start date, and whatever other settings available to me that I don't know about, what is the correct way to have the tasks scheduled?

  Read the article

• Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

  - by ShimmerGeek

  My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

  Read the article

• Some Portions of Computer Running Slow (Specifically Graphics)

  - by Mike Gates

  I noticed that a few things are running slow today on my Windows 7 laptop. Specifically, they are: Opening and closing windows takes several seconds for the animation to complete. Windows media player opens fine, but the movies are very laggy MMORPG's, such as RuneScape, are extremely laggy When waking my computer from sleep mode, after entering my password, my desktop takes about 3 seconds to fade in Other than those, everything runs at a normal speed. Things I've done that maybe contributed to this problem: Changed the graphics processor (by plugging in/unplugging the charger) [however, no matter how I change the graphics, I'm still getting this lagginess] Installed AdBlock, a Firefox addon [I recently removed it, and I'm still experiencing this problem] Went into Advanced System Settings, Clicked Settings, and unchecked a few visual things (such as the animation for opening and closing windows) [sure, this got rid of the opening/closing windows lag, but I like that little animation - plus that leaves all the other lag problems I'm experiencing] So, does anyone have any ideas/fixes? If so, please respond. Thank you. Some Other Information: I'm on a HP Pavillion dv7 laptop, 4285 Entertainment PC, with: intel CORE i5 inside, ATI Mobility Radeon Premium Graphics, Microsoft DirectX11 Opening and closing of windows: Defined as opening a program (i.e. Firefox) or closing it by hitting the X in the upper-right hand corner. Lately, the animation for opening and closing windows (which is simply either growing from the icon from the taskbar to fill the screen, or shrinking from the screen down towards the icon on the toolbar.) This problem also occurs for minimizing/maximizing windows. Very laggy movies: defined as .avi movie files saved to My Documents which skips several frames per second and seemingly slows down the movie as a whole Extremely laggy games: I tried RuneScape today, and movement in the game was at least 10x slower than it ever has been, even when playing on the lowest detail/graphics Desktop taking 3 seconds to fade in after sleep: in this scenario, I had no other programs running visibly. The computer generally fades to black from the password screen to the desktop in about 1 second, normally. However, it is now taking 3 or more seconds.

  Read the article

• Windows 7 clean install becomes corrupt after reboot (repeated many fresh installs)

  - by pjotr_dolphin

  My laptop keeps crashing on boot after clean Windows 7 install. Ok, here is the story, and some fact. Computer: Samsung NP900X3C-A04HK (256GB SSD, 8GB RAM) OS to install: Windows 7 Ultimate SP1 (not from Samsung, own fresh Win) I purchased this laptop about a year ago, never booted it into the Windows Home that was installed on it, installed directly Ubuntu on the machine. Full disc encryption was the selected install, so of course it wiped the complete disc (including Samsung Recovery Partition). After some time, I felt like going back to Windows, as Windows 7 is actually quite nice. So I went to buy a fresh Windows 7Ultimate with SP1. Now to the tricky part. Windows installs perfectly, and after installing all Windows updates, drivers from Samsung, software I need, it is time for shutting it down and go to bed. Starting it up again, and it is not booting, these are the type of errors I have gotten so far (fresh installed it more then a dozen times now, and tried different suggestions from threads on the net). Windows failed to start... Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. File: /boot/bcd Status: 0xc000000f Info: an error occurred while attempting to read the boot configuration data. And some other errors, not all the same. Not memory of this. I have run different disc checks, and all says my SSD is in perfect shape. Note: Soft reboots from Windows menu works, never gets corrupted. But if I Shutdown and then start it up again, this is when it happens. Can someone help me not get back to Ubunut? What can be the cause, and how can it be fixed so I do not get there problems again?

  Read the article

• How to manage enterprise network of Linux machines?

  - by killy9999

  I work at the university. In my institute we have six computer laboratories used for teaching. Each lab has almost 20 computers, which gives over 100 machines total. Computers have either Windows XP or Windows 7 Eneterprise operating system. We use Symantec Ghost to manage all the computers. Each computer has a Ghost client installed, which allows to control computers over network. Every six months we restore a master image on one of the computers in a lab, update that image and distribute it over the network to all computers in a laboratory. Thanks to Ghost client this is done automatically with just a few clicks. Recently I suggested that it would be good to have Linux installed in the laboratories. The administrators were concerned that we would not be able to manage that many computers if each would have to be updated manually. The question is: how to manage such a huge network of Linux machines in an automated way? To make the description of our network more complete I'll add that all students have their accounts (about few thousand users) on a central server. These are accessed via LDAP. To use a computer in laboratory each student has to log in using his own account.

  Read the article

• Centos 5.5 install PearDB

  - by John Gardeniers

  Disclaimer: I use Linux for some jobs but I am not a Linux admin. I have a Centos 5.4 machine which performs some server duties and doubles as a web site development machine. PHP 5.3.3 was installed from RPM with the --without-pear option. I now wish to use PearDB but can't figure out how to install it. If I run yum install php-pear-db, it comes back with Error: Missing Dependency: php = 5.1.6-27.el5_5.3 is needed by package php-devel-5.1.6-27.el5_5.3.i386 (updates). The only RPM I've found that looks like it might be close currently has a dead link, so I can't even try that. What would be the best way to go about this? Is there a way to reinstall from the RPM and include pear? Can I install the dependency without breaking the current installation? Should I try to uninstall the original PHP and reinstall it from source, complete with pear? I thought this might have been an SU question but the FAQ over there suggests otherwise.

  Read the article

• Inexpensive (used) hardware for Xen virtualization test?

  - by Jason Antman

  Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

  Read the article

• Why is my HP TouchSmart tx2 1025dx shutting down?

  - by Kristy

  I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

  Read the article

• IE8 page reload hangs

  - by Rod

  When a 7mb HTM file is first opened (by clicking on the file icon or using Open With), both IE8 and Firefox display this browser file quickly. After the file is closed, Firefox will reopen this file quickly, but IE8 appears to hang during the reopen. Clearing the IE cache does not help. However, IE will reopen the file quickly again only if the File/Open/Browse feature of the menu bar is used (clicking on the file icon can be used only once between computer reboots). Testing suggests that the problem relates to the number of HTML hyperlinks pointing to another part of the file. There are many hyperlinks, but they are not a problem during the first load of the document (between computer reboots). What needs to be fixed to avoid use of the workaround? Using Windows XP SP3 Update 6/23/12 - Controlled testing shows that the number of hyperlinks is not the problem. The way this large file is opened is the difference: 1) from the IE menu bar, File/Open/Browse is consistent and fast (but not as fast as FF). 2) clicking on the file name in the folder (even when IE is the default program for this file type) causes a much delayed load of the file. Creating a smaller file demonstrates the delayed load, but verifies that the load eventually occurs.

  Read the article

• file system damage

  - by jffrs

  I try recover the backup superblock on /dev/sda2 that contain ubuntu 12.04 LTS and partition ext4 with livecd ubuntu 10.04. the message is below root@ubuntu:/home/ubuntu# fsck.ext4 -b 163840 -B 4096 /dev/sda2 e2fsck 1.41.11 (14-Mar-2010) /dev/sda2 was not cleanly unmounted, check forced. Resize inode not valid. Recreate? yes Pass 1: Checking inodes, blocks, and sizes Programming error? block #7963637 claimed for no reason in process_bad_block. Programming error? block #11240437 claimed for no reason in process_bad_block. Root inode is not a directory. Clear? yes Inode 712 is in extent format, but superblock is missing EXTENTS feature Fix? yes Inode 98519 has compression flag set on filesystem without compression support. Clear? yes Inode 98519 has INDEX_FL flag set but is not a directory. Clear HTree index? what's the correct procedure?

  Read the article

• Git workflow for two tight-knit projects

  - by Pioul

  Two very similar projects I'm maintaining an online Markdown editor using Git as RCS (and accessorily made available on GitHub). From this web app, I've created a Chrome app: the code is the same, aside from some Chrome technicalities. I care about open sourcing these two projects. Still, the Chrome app's code being the same as the web app's except for some dull details, I've first chosen to (1) not publish the Chrome app on GitHub, and (2) not use Git to manage its code. Instead, I would manually review the web app's commits, then replicate the few changes in the Chrome app. … slightly drifting apart However, I've decided to add a feature to the Chrome app only. So, even though both codebases will remain broadly similar, they'll be diverging enough to make me reconsider the rationale behind my initial decision to not version control nor share the Chrome app's source code. Since I'm now willing to use Git to version control both apps, and that I want to share both of them on GitHub, how should I go about it? Should I use two different repositories, or one repo with two long-running branches? What would be the pros and cons of each approach in that context? What would be the easiest/fastest way to regularly "import" commits from the web app to the Chrome app, since the web app is going to remain the master branch? Is cherry-picking the only solution?

  Read the article

• how to throttle http requests on a linux machine?

  - by hooraygradschool

  EDIT: here is the summery: i need to reduce max connections preferably system wide on Ubuntu 11.04 but at least within Google Chrome. i do not need or want to throttle bandwidth, Verizon seems to only care about the number of connections so that is all i want to change. also, i don't want to use firefox unless i have to, i have three other machines all using chrome and synced and i just prefer it over firefox. i use tethering for my home internet connection via my verizon cell phone. without paying for it. this works just fine for streaming netflix via my nintendo wii and pretty much every other conceivable use ive had for it. except, during heavy usage with multiple tabs open on my laptop, the network connection on my phone will just turn off, then on again, then off, but it never fully connects. i think, based on this and other questions that this is caused by verizon getting too many http requests from my phone. is there some software, script, setting or otherwise that would allow me to throttle my requests to say, 5 or 10 or whatever it turns out is 1 less than verizon is looking for, so that my cell's network connection is not lost? i would far prefer a slow down rather than complete shut off of my internet connection. i am almost certain is from quantity of requests and not related to data, because, as i mentioned, netflix will run all day without a hitch, and that uses more data than anything else i would be doing. if i had a router i am pretty sure there are settings i could easily change to only allow so many requests at a time ... but in this case, my phone is my router, so no settings. im using ubuntu 11.04 on my netbook with an htc incredible on verizon (not that the phone details are relevant) i have been trying to figure this out for quite some time, currently the only fix is ensure that all requests are stopped and then sometimes it works again, other times i have to manually turn my 3g service off and then back on. thank you so much for any assistance!

  Read the article

• Corrupted Laptop - Transfer Data Without My Computer (explorer.exe) Using Command Line

  - by nicorellius

  I have a laptop (Toshiba Satellite) that is pretty messed up. The person this belongs too already replaced it with a new machine. My job is to transfer all her data from this machine to disk so that I can transfer it to her. She doesn't want to lose any data (understandably so). Any operation I attempted (i.e., double clicking on any folder icon, like My Documents, My Computer, etc) resulted din a complete crash. The only good news is that I can actually start and navigate around using the command line. Also, I can access the internet. I have a network, so if I can map the drives I can get this thing figured out (hopefully). Also, I tried a USB drive but I couldn't figure out how to access it from the command line. Two questions (I need to use the command line for these): How would I go about accessing the USB drive and how can I map the shared drives on my network so that I may cd to that directory for use of the copy command?

  Read the article

• Help with Backup Scheme for B.E 12.5

  - by Jemartin

  I'm in process of implementing a new backup scheme. I would say that I'm kind of new to it. So here my question. I'm currently using Backup Exec 12.5 on Windows Server 2008 w/Hyper-V, and IBM Adic Scalar 24. I currently backup our mail server, SQL DB, Board Server Linux Red Hat, Ftp, etc. To a Near-line which is local on our SAN I have the daily's go there as well as full. I would like to start weekly full to tape on a Saturday it takes about 2-3 days to complete the entire full to tape due to backing up from our Co-Lo as well. I have read up on the Father/son rotation but here's my issue with that I dont use tapes everyday only on the weekly full to tape will I be using them. So if there is 4 weeks in a month would I rotate in this order ( Month June WK1 =7tapes , June WK2=7 tapes, June WK3=7tapes June Wk4=7tapes with WK4 being the last tape for the month of June I would use that as a Month tape. For the month of July Wk1= June's WK1 tapes, July WK2= June's WK2 tapes July WK4 = Junes Wk4 tape for a month or would I use a set of new tapes for the last week in July. All tapes are being taking off site as well.

  Read the article

< Previous Page | 551 552 553 554 555 556 557 558 559 560 561 562  | Next Page >