Search Results

Search found 48589 results on 1944 pages for 'system requirements'.

Page 556/1944 | < Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >

• Why does Akonadi on KDE 4.6.0 refuse to start?

  - by Patches

  Akonadi refuses to start on my fresh installation of KDE 4.6.0 from the kubuntu-backports PPA on Ubuntu 10.10 Maverick Meerkat, preventing me from usking KMail. Here is the full error output: patches@pleistocene:~/.local/share$ akonadictl start Starting Akonadi Server... done. patches@pleistocene:~/.local/share$ Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb772e400] 3: [0xb772e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6e9f941] 5: /lib/libc.so.6(abort+0x182) [0xb6ea2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb74d62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb757168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7581425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb758295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6e8bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb77ae400] 3: [0xb77ae416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6f1f941] 5: /lib/libc.so.6(abort+0x182) [0xb6f22e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75562dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75f168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb7601425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb760295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6f0bce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb778b400] 3: [0xb778b416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6efc941] 5: /lib/libc.so.6(abort+0x182) [0xb6effe42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75332dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb75ce68e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb75de425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb75df95d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6ee8ce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) search paths: ("/home/patches/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/sbin", "/usr/bin", "/sbin", "/bin", "/usr/games", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin") Found mysql_install_db: "/usr/bin/mysql_install_db" Found mysqlcheck: "/usr/bin/mysqlcheck" Database process exited unexpectedly during initial connection! executable: "/usr/sbin/mysqld-akonadi" arguments: ("--defaults-file=/home/patches/.local/share/akonadi//mysql.conf", "--datadir=/home/patches/.local/share/akonadi/db_data/", "--socket=/home/patches/.local/share/akonadi/socket-pleistocene/mysql.socket") stdout: "" stderr: "Could not open required defaults file: /home/patches/.local/share/akonadi//mysql.conf Fatal error in defaults handling. Program aborted 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Warning] Can't create test file /home/patches/.local/share/akonadi/db_data/pleistocene.lower-test 110209 16:41:12 [Note] Plugin 'FEDERATED' is disabled. /usr/sbin/mysqld-akonadi: Can't find file: './mysql/plugin.frm' (errno: 13) 110209 16:41:12 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 110209 16:41:12 InnoDB: Operating system error number 13 in a file operation. InnoDB: The error means mysqld does not have the access rights to InnoDB: the directory. InnoDB: File name ./ibdata1 InnoDB: File operation call: 'create'. InnoDB: Cannot continue operation. " exit code: 1 process error: "Unknown error" "[ 0: akonadiserver(_Z11akBacktracev+0x35) [0x8086055] 1: akonadiserver() [0x8086516] 2: [0xb784e400] 3: [0xb784e416] 4: /lib/libc.so.6(gsignal+0x51) [0xb6fbf941] 5: /lib/libc.so.6(abort+0x182) [0xb6fc2e42] 6: /usr/lib/libQtCore.so.4(_Z17qt_message_output9QtMsgTypePKc+0x8c) [0xb75f62dc] 7: akonadiserver(_ZN15FileDebugStream9writeDataEPKcx+0xc4) [0x8087574] 8: /usr/lib/libQtCore.so.4(_ZN9QIODevice5writeEPKcx+0x8e) [0xb769168e] 9: /usr/lib/libQtCore.so.4(+0x103425) [0xb76a1425] 10: /usr/lib/libQtCore.so.4(_ZN11QTextStreamD1Ev+0x3d) [0xb76a295d] 11: akonadiserver(_ZN6QDebugD1Ev+0x43) [0x8081b73] 12: akonadiserver(_ZN13DbConfigMysql19startInternalServerEv+0x1c27) [0x810c177] 13: akonadiserver(_ZN7Akonadi13AkonadiServer20startDatabaseProcessEv+0xe3) [0x8087a23] 14: akonadiserver(_ZN7Akonadi13AkonadiServerC1EP7QObject+0xca) [0x8088b6a] 15: akonadiserver(_ZN7Akonadi13AkonadiServer8instanceEv+0x48) [0x808a1d8] 16: akonadiserver(main+0x364) [0x8080fb4] 17: /lib/libc.so.6(__libc_start_main+0xe7) [0xb6fabce7] 18: akonadiserver() [0x8080b81] ] " ProcessControl: Application 'akonadiserver' returned with exit code 255 (Unknown error) "akonadiserver" crashed too often and will not be restarted! I tried moving the ~/.local/share/akonadi folder and running it fresh, and I also tried starting Akonadi from a brand new user, all to no avail. Requested by @djeikyb: patches@pleistocene:~$ ls -ld ~/.local drwxrwx--- 3 patches patches 4096 2011-02-07 03:15 /home/patches/.local patches@pleistocene:~$ mysql_upgrade Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) when trying to connect FATAL ERROR: Upgrade failed patches@pleistocene:~$ mysql_upgrade -S ~/.local/share/akonadi/socket-pleistocene/ Looking for 'mysql' as: mysql Looking for 'mysqlcheck' as: mysqlcheck Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--socket=/home/patches/.local/share/akonadi/socket-pleistocene/' mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/home/patches/.local/share/akonadi/socket-pleistocene/' (111) when trying to connect FATAL ERROR: Upgrade failed

  Read the article

• Utilities Worldwide Succeed with Oracle Utilities Applications

  - by caroline.yu

  More than 50 utilities worldwide have selected or implemented Oracle Utilities applications in the current fiscal year to date to respond to environmental imperatives, adapt to changing business conditions, meet and exceed customer expectations, implement smart grid components and address operational issues. Customers who have recently selected or implemented Oracle Utilities applications include: Acea Distribuzione, California Water Service Company, City of Winnipeg, Denver Water, Enersource Hydro, GasTerra, Modesto Irrigation District, Rappahannock Electric Cooperative, San Francisco Public Utilities Commission and Western Power. "Around the world, utilities are under pressure to address customer demands, improve environmental quality and comply with regulatory requirements. Oracle Utilities provides a choice of mission-critical applications to deliver tangible business results. Our recent traction in the industry illustrates the solid value we bring to our customers," said Stephan Scholl, senior vice president and general manager, Oracle Utilities.

  Read the article

• Why doesn't my implementation of El Gamal work for long text strings?

  - by angstrom91

  I'm playing with the El Gamal cryptosystem, and my goal is to be able to encipher and decipher long sequences of text. I have come up with a method that works for short sequences, but does not work for long sequences, and I cannot figure out why. El Gamal requires the plaintext to be an integer. I have turned my string into a byte[] using the .getBytes() method for Strings, and then created a BigInteger out of the byte[]. After encryption/decryption, I turn the BigInteger into a byte[] using the .toByteArray() method for BigIntegers, and then create a new String object from the byte[]. This works perfectly when i call ElGamalEncipher with strings up to 129 characters. With 130 or more characters, the output produced is garbled. Can someone suggest how to solve this issue? Is this an issue with my method of turning the string into a BigInteger? If so, is there a better way to turn my string of text into a BigInteger and back? Below is my encipher/decipher code with a program to demonstrate the problem. import java.math.BigInteger; public class Main { static BigInteger P = new BigInteger("15893293927989454301918026303382412" + "2586402937727056707057089173871237566896685250125642378268385842" + "6917261652781627945428519810052550093673226849059197769795219973" + "9423619267147615314847625134014485225178547696778149706043781174" + "2873134844164791938367765407368476144402513720666965545242487520" + "288928241768306844169"); static BigInteger G = new BigInteger("33234037774370419907086775226926852" + "1714093595439329931523707339920987838600777935381196897157489391" + "8360683761941170467795379762509619438720072694104701372808513985" + "2267495266642743136795903226571831274837537691982486936010899433" + "1742996138863988537349011363534657200181054004755211807985189183" + "22832092343085067869"); static BigInteger R = new BigInteger("72294619754760174015019300613282868" + "7219874058383991405961870844510501809885568825032608592198728334" + "7842806755320938980653857292210955880919036195738252708294945320" + "3969657021169134916999794791553544054426668823852291733234236693" + "4178738081619274342922698767296233937873073756955509269717272907" + "8566607940937442517"); static BigInteger A = new BigInteger("32189274574111378750865973746687106" + "3695160924347574569923113893643975328118502246784387874381928804" + "6865920942258286938666201264395694101012858796521485171319748255" + "4630425677084511454641229993833255506759834486100188932905136959" + "7287419551379203001848457730376230681693887924162381650252270090" + "28296990388507680954"); public static void main(String[] args) { FewChars(); System.out.println(); ManyChars(); } public static void FewChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 129 characters which works just fine . This is a string " + "of 129 characters which works just fine . This is a s", P, G, R); System.out.println("This is a string of 129 characters which works " + "just fine . This is a string of 129 characters which works " + "just fine . This is a s"); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) String output = ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P); System.out.println("The decrypted text is: " + output); } public static void ManyChars() { //ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) BigInteger[] cipherText = ElGamal.ElGamalEncipher("This is a string " + "of 130 characters which doesn’t work! This is a string of " + "130 characters which doesn’t work! This is a string of ", P, G, R); System.out.println("This is a string of 130 characters which doesn’t " + "work! This is a string of 130 characters which doesn’t work!" + " This is a string of "); //ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) String output = ElGamal.ElGamalDecipher(cipherText[0], cipherText[1], A, P); System.out.println("The decrypted text is: " + output); } } import java.math.BigInteger; import java.security.SecureRandom; public class ElGamal { public static BigInteger[] ElGamalEncipher(String plaintext, BigInteger p, BigInteger g, BigInteger r) { // returns a BigInteger[] cipherText // cipherText[0] is c // cipherText[1] is d SecureRandom sr = new SecureRandom(); BigInteger[] cipherText = new BigInteger[2]; BigInteger pText = new BigInteger(plaintext.getBytes()); // 1: select a random integer k such that 1 <= k <= p-2 BigInteger k = new BigInteger(p.bitLength() - 2, sr); // 2: Compute c = g^k(mod p) BigInteger c = g.modPow(k, p); // 3: Compute d= P*r^k = P(g^a)^k(mod p) BigInteger d = pText.multiply(r.modPow(k, p)).mod(p); // C =(c,d) is the ciphertext cipherText[0] = c; cipherText[1] = d; return cipherText; } public static String ElGamalDecipher(BigInteger c, BigInteger d, BigInteger a, BigInteger p) { //returns the plaintext enciphered as (c,d) // 1: use the private key a to compute the least non-negative residue // of an inverse of (c^a)' (mod p) BigInteger z = c.modPow(a, p).modInverse(p); BigInteger P = z.multiply(d).mod(p); byte[] plainTextArray = P.toByteArray(); return new String(plainTextArray); } }

  Read the article

• Renoise and dssi and jack

  - by Bojan

  This may be a little complicated, but, is jack a necessity? I mean, i use renoise, and, since i dont have the need for low latencies, do i really need to use it? My basic setup ( or workflow ) is that i use csound to render stuff to wav, then import it as a sample in renoise. That goes with field recordings, my own samples, etc. So, i dont need ultra low latencies, and i dont need to patch "cords", but i want to use dssi plugins, and dssi-vst. What would be something of a minimum requirements of apps that should work. Can renoise load dssi-vst plugins by itself or do i need to use jack to patch thru or something third, i tried to read lot of articles but i got lost in the different setups...

  Read the article

• Is there any way to disable write-access to source code from within Xcode?

  - by Kapil Kapre

  Is there any easy solution to prevent Xcode from writing to source files in a project? I want to edit source files externally and only use Xcode for debugging and so I want to prevent any accidental modifications getting saved via xcode. (Obviously I want Xcode to pickup external changes to files when I build/debug) One possible solution that I thought of was to enable app sandbox entitlements on xcode and manually maintain a list of directories that it should not write to. Is this feasible? Any other ideas? On the sandboxing thing, I'm not sure if Xcode is disqualified as per Apple's Sandboxing Requirements.

  Read the article

• Getting started as a programmer -- school or self-study?

  - by Cyberherbalist

  My son who has is married with two small children has decided that he needs a change of career, and is considering getting into programming. He would do well in the field, I am certain, but I am uncertain how to advise him with regards to a lengthy course of schooling, or just try to learn 'on the job", so to speak. I suspect that if he doesn't ultimately get at least an associate degree in program (like his old man), that his job possibilities are going to be very constrained. This isn't the Dot-Com Bubble, after all, when they'd hire you if you could spell c-o-m-p-u-t-e-r because they needed bodies and the ability to fog a mirror wasn't quite enough. Should he go for a full program at the university, a two-year program (he already has a 2-year degree in video production, so he's got the general ed requirements whipped), or does anyone think self-study alone might be enough? To get started, anyway. I started back in 1987 with COBOL and a 2-year degree, which seemed the minimum at the time, but perhaps things are different now?

  Read the article

• Custom Upload Advanced Scripting CMS

  - by bradlis7

  I am looking for a specific content management platform that would display themes for my application. Requirements are as folllows: Any user can upload content, but has to be approved by an administrator When the user uploads the content, an external application is called to generate a thumbnail I could create this using codeigniter or something, but I would much prefer to use an existing system. I have experience with Drupal (seems a little bloated for my needs), and Wordpress (I'm using it as main website right now). Maybe I need a plugin for WordPress instead of another CMS. WordPress currently blocks uploads of my file type. I can modify it, but it's a pain to update it every time WordPress has a new release.

  Read the article

• Estimating time for planning and technical design using Evidence Based Scheduling

  - by Turgs

  I'm at the beginning of a development project in a large organization. The Functional Requirements are currently being worked out and documented with our business stakeholders by our Enterprise Design department. I'm required to produce Technical Design Documents and manage the team to actually build the solution. I'm wanting to try Evidence Based Scheduling, but as I understand, part of that is breaking the job down into small tasks that are less than 14 hours in duration, which requires me to have already done the Technical Design. Therefore, can Evidence Based Scheduling only be used after the Technical Design has been done? How do you then plan and estimate the time it may take to come up with the Technical Design?

  Read the article

• What Works in Data Integration?

  - by dain.hansen

  TDWI just recently put out this paper on "What Works in Data Integration". I invite you especially to take a look at the section on "Accelerating your Business with Real-time Data Integration" and the DIRECTV case study. The article discusses some of the technology considerations for BI/DW and how data integration plays a role to deliver timely, accessible, and high-quality data. It goes on to outline the three key requirements for how to deliver high performance, low impact, and reliability and how that can translate to faster results. The DIRECTV webinar is something you definitely want to take a look at, you'll hear how DIRECTV successfully transformed their data warehouse investments into a competitive advantage with Oracle GoldenGate.

  Read the article

• Create an Asp.net Gridview with Checkbox in each row

  - by ybbest

  One of the frequent requirements for Asp.net Gridview is to add a checkbox for each row and a checkbox to select all the items like the Gridview below. This can be easily achieved by using jQuery. You can find the complete source doe here. $(document).ready(function () { $(‘input[name$="CDSelectAll"]‘).click(function () { if ($(this).attr(“checked”)) { $(‘input[name$="CDSelect"]‘).attr(‘checked’, ‘checked’); } else { $(‘input[name$="CDSelect"]‘).removeAttr(‘checked’); } }); });

  Read the article

• Is data integrity possible without normalization?

  - by shuniar

  I am working on an application that requires the storage of location information such as city, state, zip code, latitude, and longitude. I would like to ensure: Location data is accurate Detroit, CA Detroit IS NOT in California Detroit, MI Detroit IS in Michigan Cities and states are spelled correctly California not Calefornia Detroit not Detriot Cities and states are named consistently Valid: CA Detroit Invalid: Cali california DET d-town The D Also, since city/zip data is not guaranteed to be static, updating this data in a normalized fashion could be difficult, whereas it could be implemented as a de facto location if it is denormalized. A couple thoughts that come to mind: A collection of reference tables that store a list of all states and the most common cities and zip codes that can grow over time. It would search the database for an exact or similar match and recommend corrections. Use some sort of service to validate the location data before it is stored in the database. Is it possible to fulfill these requirements without normalization, and if so, should I denormalize this data?

  Read the article

• What's the best Communication Pattern for EJB3-based applications?

  - by Hank

  I'm starting a JEE project that needs to be strongly scalable. So far, the concept was: several Message Driven Beans, responsible for different parts of the architecture each MDB has a Session Bean injected, handling the business logic a couple of Entity Beans, providing access to the persistence layer communication between the different parts of the architecture via Request/Reply concept via JMS messages: MDB receives msg containing activity request uses its session bean to execute necessary business logic returns response object in msg to original requester The idea was that by de-coupling parts of the architecture from each other via the message bus, there is no limit to the scalability. Simply start more components - as long as they are connected to the same bus, we can grow and grow. Unfortunately, we're having massive problems with the request-reply concept. Transaction Mgmt seems to be in our way plenty. It seams that session beans are not supposed to consume messages?! Reading http://blogs.sun.com/fkieviet/entry/request_reply_from_an_ejb and http://forums.sun.com/message.jspa?messageID=10338789, I get the feeling that people actually recommend against the request/reply concept for EJBs. If that is the case, how do you communicate between your EJBs? (Remember, scalability is what I'm after) Details of my current setup: MDB 1 'TestController', uses (local) SLSB 1 'TestService' for business logic TestController.onMessage() makes TestService send a message to queue XYZ and requests a reply TestService uses Bean Managed Transactions TestService establishes a connection & session to the JMS broker via a joint connection factory upon initialization (@PostConstruct) TestService commits the transaction after sending, then begins another transaction and waits 10 sec for the response Message gets to MDB 2 'LocationController', which uses (local) SLSB 2 'LocationService' for business logic LocationController.onMessage() makes LocationService send a message back to the requested JMSReplyTo queue Same BMT concept, same @PostConstruct concept all use the same connection factory to access the broker Problem: The first message gets send (by SLSB 1) and received (by MDB 2) ok. The sending of the returning message (by SLSB 2) is fine as well. However, SLSB 1 never receives anything - it just times out. I tried without the messageSelector, no change, still no receiving message. Is it not ok to consume message by a session bean? SLSB 1 - TestService.java @Resource(name = "jms/mvs.MVSControllerFactory") private javax.jms.ConnectionFactory connectionFactory; @PostConstruct public void initialize() { try { jmsConnection = connectionFactory.createConnection(); session = jmsConnection.createSession(false, Session.AUTO_ACKNOWLEDGE); System.out.println("Connection to JMS Provider established"); } catch (Exception e) { } } public Serializable sendMessageWithResponse(Destination reqDest, Destination respDest, Serializable request) { Serializable response = null; try { utx.begin(); Random rand = new Random(); String correlationId = rand.nextLong() + "-" + (new Date()).getTime(); // prepare the sending message object ObjectMessage reqMsg = session.createObjectMessage(); reqMsg.setObject(request); reqMsg.setJMSReplyTo(respDest); reqMsg.setJMSCorrelationID(correlationId); // prepare the publishers and subscribers MessageProducer producer = session.createProducer(reqDest); // send the message producer.send(reqMsg); System.out.println("Request Message has been sent!"); utx.commit(); // need to start second transaction, otherwise the first msg never gets sent utx.begin(); MessageConsumer consumer = session.createConsumer(respDest, "JMSCorrelationID = '" + correlationId + "'"); jmsConnection.start(); ObjectMessage respMsg = (ObjectMessage) consumer.receive(10000L); utx.commit(); if (respMsg != null) { response = respMsg.getObject(); System.out.println("Response Message has been received!"); } else { // timeout waiting for response System.out.println("Timeout waiting for response!"); } } catch (Exception e) { } return response; } SLSB 2 - LocationService.Java (only the reply method, rest is same as above) public boolean reply(Message origMsg, Serializable o) { boolean rc = false; try { // check if we have necessary correlationID and replyTo destination if (!origMsg.getJMSCorrelationID().equals("") && (origMsg.getJMSReplyTo() != null)) { // prepare the payload utx.begin(); ObjectMessage msg = session.createObjectMessage(); msg.setObject(o); // make it a response msg.setJMSCorrelationID(origMsg.getJMSCorrelationID()); Destination dest = origMsg.getJMSReplyTo(); // send it MessageProducer producer = session.createProducer(dest); producer.send(msg); producer.close(); System.out.println("Reply Message has been sent"); utx.commit(); rc = true; } } catch (Exception e) {} return rc; } sun-resources.xml <admin-object-resource enabled="true" jndi-name="jms/mvs.LocationControllerRequest" res-type="javax.jms.Queue" res-adapter="jmsra"> <property name="Name" value="mvs.LocationControllerRequestQueue"/> </admin-object-resource> <admin-object-resource enabled="true" jndi-name="jms/mvs.LocationControllerResponse" res-type="javax.jms.Queue" res-adapter="jmsra"> <property name="Name" value="mvs.LocationControllerResponseQueue"/> </admin-object-resource> <connector-connection-pool name="jms/mvs.MVSControllerFactoryPool" connection-definition-name="javax.jms.QueueConnectionFactory" resource-adapter-name="jmsra"/> <connector-resource enabled="true" jndi-name="jms/mvs.MVSControllerFactory" pool-name="jms/mvs.MVSControllerFactoryPool" />

  Read the article

• dual-boot (win-xp/ubu12.04) graphics card for ubu-desktop/win-xp-games

  - by iole1

  for work I need to get a a new and cheap graphics card for a dual boot machine: windows xp/ubuntu 12.04 LTS. The only requirements I have are: it should work 'flawlessly' in ubuntu (proprietary drivers are ok) it should handle Guild Wars 2 & League of Legends in windows xp (this is really the top priority as we need to be able to play at work :) - yes I have a cool job) I know nothing about graphics cards (and it seems to be a jungle out there). From other questions here and some webstigation I think I'd like to go for a Nvidia card, I've been trying to figure out what models fit the system req's but it seems they use different kind of model numbers so I don't get any wiser. tl;dr: will http://www.geforce.co.uk/hardware/desktop-gpus/geforce-gt-620-oem/specifications run Guild Wars 2 http://gamesystemrequirements.com/games.php?id=938 Or what is the worst card from nVidia that will run GW2 smoothly and work well in Ubuntu 12.04 Thanks!

  Read the article

• Web Application Tasks Estimation

  - by Ali

  I know the answer depends on the exact project and its requirements but i am asking on the avarage % of the total time goes into the tasks of the web application development statistically from your own experiance. While developing a web application (database driven) How much % of time does each of the following activities usually takes: -- database creation & all related stored procedures -- server side development -- client side development -- layout settings and designing I know there are lots of great web application developers around here and each one of you have done fair amount of web development and as a result there could be an almost fixed percentage of time going to each of the above activities of web developments for standard projects Update : I am not expecting someone to tell me number of hours i am asking about the average percentage of time that goes on each of the activities as per your experience i.e. server side dev 50%, client side development 20% ,,,,, I repeat there will be lots of cases that differs from the standard depending on the exact requirments of each web application project but here i am asking about Avarage for standard (no special requirment) web project

  Read the article

• How to set focus for CustCombBox in a CellEditingTemplate when entering page at the first time(MVVM

  - by Shamin

  PreparingCellForEdit="dg_PreparingCellForEdit" BeginningEdit="dg_BeginningEdit" <data:DataGridTemplateColumn MinWidth="300"> <data:DataGridTemplateColumn.HeaderStyle> <Style TargetType="primitives:DataGridColumnHeader" BasedOn="{StaticResource FOTDataGridColumnHeaderStyle}"> <Setter Property="ContentTemplate"> <Setter.Value> <DataTemplate> <TextBlock Text="{Binding CancelReasonText2,Source={StaticResource LabelResource}}" Style="{StaticResource TextBlockLabelStandardStyle}"/> </DataTemplate> </Setter.Value> </Setter> </Style> </data:DataGridTemplateColumn.HeaderStyle> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <TextBlock Text="{Binding CancelReason.CancelCodeDescription}" Style="{StaticResource TextBlockLabelStandardStyle}"/> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> <data:DataGridTemplateColumn.CellEditingTemplate> <DataTemplate> <input:AutoCompleteBox x:Name="cBoxCancelReason" FilterMode="StartsWith" IsDropDownOpen="True" SelectedItem="{Binding CancelReason, Mode=TwoWay}" ItemsSource="{Binding CancelCodes}" ValueMemberPath="CancelCodeDescription" > <input:AutoCompleteBox.ItemTemplate> <DataTemplate> <TextBlock Text="{Binding CancelCodeDescription}" Style="{StaticResource TextBlockLabelStandardStyle}"/> </DataTemplate> </input:AutoCompleteBox.ItemTemplate> </input:AutoCompleteBox> </DataTemplate> </data:DataGridTemplateColumn.CellEditingTemplate> </data:DataGridTemplateColumn> </data:DataGrid.Columns> </data:DataGrid> ---CodeBind public partial class CancelFlightView : UserControl,ICancelFlightView { private data.CancelCode DefaultCancelCode { get { data.CancelCode code = new data.CancelCode(); code.CancelCd = "-1"; code.CancelCodeDescription = "-- Select Cancel Reason --"; return code; } } public CancelFlightView() { InitializeComponent(); this.dg.LoadingRow += new EventHandler<DataGridRowEventArgs>(dg_LoadingRow); //this.Loaded += new RoutedEventHandler(CancelFlightView_Loaded); } void dg_LoadingRow(object sender, DataGridRowEventArgs e) { CheckBox checkBox = (CheckBox)dg.Columns[0].GetCellContent(e.Row); if (checkBox.IsChecked.Value) { FrameworkElement obj = (FrameworkElement)dg.Columns[1].GetCellContent(e.Row); System.Windows.Browser.HtmlPage.Plugin.Focus(); DataGridCell cellEdit = (DataGridCell)obj.Parent; cellEdit.Focus(); dg.BeginEdit(); } } //private void UserControl_Loaded(object sender, RoutedEventArgs e) //{ // if (DataContext != null) // { // CancelFlightViewModel viewModel = (CancelFlightViewModel)DataContext; // viewModel.View = this; // viewModel.Grid = dg; // //viewModel.InitFocus(); // } //} //void CancelFlightView_Loaded(object sender, RoutedEventArgs e) //{ // if (dg.SelectedItem != null) // { // CheckBox checkBox = (CheckBox)dg.Columns[0].GetCellContent(dg.SelectedItem); // if (checkBox.IsChecked.Value) // { // DataGridCell cellEdit = ((DataGridCell)((System.Windows.Controls.Primitives.DataGridCellsPresenter)((DataGridCell)checkBox.Parent).Parent).Children[1]); // dg.CurrentColumn = dg.Columns[1]; // System.Windows.Browser.HtmlPage.Plugin.Focus(); // cellEdit.Focus(); // dg.BeginEdit(); // } // } //} public CancelFlightView(CancelFlightViewModel viewModel):this() { ViewModel = viewModel; } private void dg_PreparingCellForEdit(object sender, DataGridPreparingCellForEditEventArgs e) { object obj = dg.Columns[1].GetCellContent(e.Row); if (obj != null && obj.GetType() == typeof(AutoCompleteBox)) { AutoCompleteBox cBoxCancelReason = (AutoCompleteBox)obj; System.Windows.Browser.HtmlPage.Plugin.Focus(); cBoxCancelReason.Focus(); } } private void CustomComboBox_SelectionChanged(object sender, SelectionChangedEventArgs e) { } private void dg_BeginningEdit(object sender, DataGridBeginningEditEventArgs e) { } private void chkFlight_Click(object sender, RoutedEventArgs e) { CheckBox chkTemp = sender as CheckBox; if (!chkTemp.IsChecked.Value) { } else { DataGridCell cellEdit = ((DataGridCell)((System.Windows.Controls.Primitives.DataGridCellsPresenter)((DataGridCell)chkTemp.Parent).Parent).Children[1]); dg.CurrentColumn = dg.Columns[1]; cellEdit.Focus(); dg.BeginEdit(); } } private void LayoutRoot_KeyUp(object sender, KeyEventArgs e) { //if (e.Key == Key.Enter) //{ //} } #region ICancelFlightView Members public CancelFlightViewModel ViewModel { get { return DataContext as CancelFlightViewModel; } set { DataContext = value; } } #endregion } Now, when user click CheckBox, I can set focus on CustCombBox, but I can't set focus on Whose checkBox.IsChecked.Value = true when page is opened for the first time. is it possible on MVVM pattern? Looking forward your reply, thanks very much.

  Read the article

• The Data Scientist

  - by BuckWoody

  A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

  Read the article

• T-SQL Tuesday #31 - Logging Tricks with CONTEXT_INFO

  - by Most Valuable Yak (Rob Volk)

  This month's T-SQL Tuesday is being hosted by Aaron Nelson [b | t], fellow Atlantan (the city in Georgia, not the famous sunken city, or the resort in the Bahamas) and covers the topic of logging (the recording of information, not the harvesting of trees) and maintains the fine T-SQL Tuesday tradition begun by Adam Machanic [b | t] (the SQL Server guru, not the guy who fixes cars, check the spelling again, there will be a quiz later). This is a trick I learned from Fernando Guerrero [b | t] waaaaaay back during the PASS Summit 2004 in sunny, hurricane-infested Orlando, during his session on Secret SQL Server (not sure if that's the correct title, and I haven't used parentheses in this paragraph yet).  CONTEXT_INFO is a neat little feature that's existed since SQL Server 2000 and perhaps even earlier.  It lets you assign data to the current session/connection, and maintains that data until you disconnect or change it.  In addition to the CONTEXT_INFO() function, you can also query the context_info column in sys.dm_exec_sessions, or even sysprocesses if you're still running SQL Server 2000, if you need to see it for another session. While you're limited to 128 bytes, one big advantage that CONTEXT_INFO has is that it's independent of any transactions.  If you've ever logged to a table in a transaction and then lost messages when it rolled back, you can understand how aggravating it can be.  CONTEXT_INFO also survives across multiple SQL batches (GO separators) in the same connection, so for those of you who were going to suggest "just log to a table variable, they don't get rolled back":  HA-HA, I GOT YOU!  Since GO starts a new batch all variable declarations are lost. Here's a simple example I recently used at work.  I had to test database mirroring configurations for disaster recovery scenarios and measure the network throughput.  I also needed to log how long it took for the script to run and include the mirror settings for the database in question.  I decided to use AdventureWorks as my database model, and Adam Machanic's Big Adventure script to provide a fairly large workload that's repeatable and easily scalable.  My test would consist of several copies of AdventureWorks running the Big Adventure script while I mirrored the databases (or not). Since Adam's script contains several batches, I decided CONTEXT_INFO would have to be used.  As it turns out, I only needed to grab the start time at the beginning, I could get the rest of the data at the end of the process.   The code is pretty small: declare @time binary(128)=cast(getdate() as binary(8)) set context_info @time   ... rest of Big Adventure code ...   go use master; insert mirror_test(server,role,partner,db,state,safety,start,duration) select @@servername, mirroring_role_desc, mirroring_partner_instance, db_name(database_id), mirroring_state_desc, mirroring_safety_level_desc, cast(cast(context_info() as binary(8)) as datetime), datediff(s,cast(cast(context_info() as binary(8)) as datetime),getdate()) from sys.database_mirroring where db_name(database_id) like 'Adv%';   I declared @time as a binary(128) since CONTEXT_INFO is defined that way.  I couldn't convert GETDATE() to binary(128) as it would pad the first 120 bytes as 0x00.  To keep the CAST functions simple and avoid using SUBSTRING, I decided to CAST GETDATE() as binary(8) and let SQL Server do the implicit conversion.  It's not the safest way perhaps, but it works on my machine. :) As I mentioned earlier, you can query system views for sessions and get their CONTEXT_INFO.  With a little boilerplate code this can be used to monitor long-running procedures, in case you need to kill a process, or are just curious  how long certain parts take.  In this example, I added code to Adam's Big Adventure script to set CONTEXT_INFO messages at strategic places I want to monitor.  (His code is in UPPERCASE as it was in the original, mine is all lowercase): declare @msg binary(128) set @msg=cast('Altering bigProduct.ProductID' as binary(128)) set context_info @msg go ALTER TABLE bigProduct ALTER COLUMN ProductID INT NOT NULL GO set context_info 0x0 go declare @msg1 binary(128) set @msg1=cast('Adding pk_bigProduct Constraint' as binary(128)) set context_info @msg1 go ALTER TABLE bigProduct ADD CONSTRAINT pk_bigProduct PRIMARY KEY (ProductID) GO set context_info 0x0 go declare @msg2 binary(128) set @msg2=cast('Altering bigTransactionHistory.TransactionID' as binary(128)) set context_info @msg2 go ALTER TABLE bigTransactionHistory ALTER COLUMN TransactionID INT NOT NULL GO set context_info 0x0 go declare @msg3 binary(128) set @msg3=cast('Adding pk_bigTransactionHistory Constraint' as binary(128)) set context_info @msg3 go ALTER TABLE bigTransactionHistory ADD CONSTRAINT pk_bigTransactionHistory PRIMARY KEY NONCLUSTERED(TransactionID) GO set context_info 0x0 go declare @msg4 binary(128) set @msg4=cast('Creating IX_ProductId_TransactionDate Index' as binary(128)) set context_info @msg4 go CREATE NONCLUSTERED INDEX IX_ProductId_TransactionDate ON bigTransactionHistory(ProductId,TransactionDate) INCLUDE(Quantity,ActualCost) GO set context_info 0x0   This doesn't include the entire script, only those portions that altered a table or created an index.  One annoyance is that SET CONTEXT_INFO requires a literal or variable, you can't use an expression.  And since GO starts a new batch I need to declare a variable in each one.  And of course I have to use CAST because it won't implicitly convert varchar to binary.  And even though context_info is a nullable column, you can't SET CONTEXT_INFO NULL, so I have to use SET CONTEXT_INFO 0x0 to clear the message after the statement completes.  And if you're thinking of turning this into a UDF, you can't, although a stored procedure would work. So what does all this aggravation get you?  As the code runs, if I want to see which stage the session is at, I can run the following (assuming SPID 51 is the one I want): select CAST(context_info as varchar(128)) from sys.dm_exec_sessions where session_id=51   Since SQL Server 2005 introduced the new system and dynamic management views (DMVs) there's not as much need for tagging a session with these kinds of messages.  You can get the session start time and currently executing statement from them, and neatly presented if you use Adam's sp_whoisactive utility (and you absolutely should be using it).  Of course you can always use xp_cmdshell, a CLR function, or some other tricks to log information outside of a SQL transaction.  All the same, I've used this trick to monitor long-running reports at a previous job, and I still think CONTEXT_INFO is a great feature, especially if you're still using SQL Server 2000 or want to supplement your instrumentation.  If you'd like an exercise, consider adding the system time to the messages in the last example, and an automated job to query and parse it from the system tables.  That would let you track how long each statement ran without having to run Profiler. #TSQL2sDay

  Read the article

• Token based Authentication for WCF HTTP/REST Services: Authentication

  - by Your DisplayName here!

  This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password));   Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler(     "Bearer",     "http://identityserver.thinktecture.com/trust/initial",     "https://roadie/webservicesecurity/rest/",     "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver();             manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig);   Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download.   (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

  Read the article

• Latest AutoVue Podcast - Customer Success at Ringhals/Vattenfall

  - by pam.petropoulos(at)oracle.com

  Ringhals, a Swedish nuclear power plant, part of the Vattenfall Group, produces 20% of the country's electricity and is the largest power station in the Nordic region. Ringhals has standardized on AutoVue for most of their engineering and asset document visualization requirements throughout their plant maintenance, design and engineering operations. This audio interview, hosted by Folia Grace, Oracle Vice President of Application Product Marketing, features Harald Carlsson, Documentation Administrator at Ringhals/Vattenfall. Hear Harald describe how they have cut IT maintenance costs, increased productivity, and improved maintenance operations throughout their facility. Click here to listen to the podcast

  Read the article

• What Counts For a DBA: Simplicity

  - by Louis Davidson

  Too many computer processes do an apparently simple task in a bizarrely complex way. They remind me of this strip by one of my favorite artists: Rube Goldberg. In order to keep the boss from knowing one was late, a process is devised whereby the cuckoo clock kisses a live cuckoo bird, who then pulls a string, which triggers a hat flinging, which in turn lands on a rod that removes a typewriter cover…and so on. We rely on creating automated processes to keep on top of tasks. DBAs have a lot of tasks to perform: backups, performance tuning, data movement, system monitoring, and of course, avoiding being noticed.  Every day, there are many steps to perform to maintain the database infrastructure, including: checking physical structures, re-indexing tables where needed, backing up the databases, checking those backups, running the ETL, and preparing the daily reports and yes, all of these processes have to complete before you can call it a day, and probably before many others have started that same day. Some of these tasks are just naturally complicated on their own. Other tasks become complicated because the database architecture is excessively rigid, and we often discover during “production testing” that certain processes need to be changed because the written requirements barely resembled the actual customer requirements.   Then, with no time to change that rigid structure, we are forced to heap layer upon layer of code onto the problematic processes. Instead of a slight table change and a new index, we end up with 4 new ETL processes, 20 temp tables, 30 extra queries, and 1000 lines of SQL code.  Report writers then need to build reports and make magical numbers appear from those toxic data structures that are overly complex and probably filled with inconsistent data. What starts out as a collection of fairly simple tasks turns into a Goldbergian nightmare of daily processes that are likely to cause your dinner to be interrupted by the smartphone doing the vibration dance that signifies trouble at the mill. So what to do? Well, if it is at all possible, simplify the problem by either going into the code and refactoring the complex code to simple, or taking all of the processes and simplifying them into small, independent, easily-tested steps.  The former approach usually requires an agreement on changing underlying structures that requires countless mind-numbing meetings; while the latter can generally be done to any complex process without the same frustration or anger, though it will still leave you with lots of steps to complete, the ability to test each step independently will definitely increase the quality of the overall process (and with each step reporting status back, finding an actual problem within the process will be definitely less unpleasant.) We all know the principle behind simplifying a sequence of processes because we learned it in math classes in our early years of attending school, starting with elementary school. In my 4 years (ok, 9 years) of undergraduate work, I remember pretty much one thing from my many math classes that I apply daily to my career as a data architect, data programmer, and as an occasional indentured DBA: “show your work”. This process of showing your work was my first lesson in simplification. Each step in the process was in fact, far simpler than the entire process.  When you were working an equation that took both sides of 4 sheets of paper, showing your work was important because the teacher could see every step, judge it, and mark it accordingly.  So often I would make an error in the first few lines of a problem which meant that the rest of the work was actually moving me closer to a very wrong answer, no matter how correct the math was in the subsequent steps. Yet, when I got my grade back, I would sometimes be pleasantly surprised. I passed, yet missed every problem on the test. But why? While I got the fact that 1+1=2 wrong in every problem, the teacher could see that I was using the right process. In a computer process, the process is very similar. We take complex processes, show our work by storing intermediate values, and test each step independently. When a process has 100 steps, each step becomes a simple step that is tested and verified, such that there will be 100 places where data is stored, validated, and can be checked off as complete. If you get step 1 of 100 wrong, you can fix it and be confident (that if you did your job of testing the other steps better than the one you had to repair,) that the rest of the process works. If you have 100 steps, and store the state of the process exactly once, the resulting testable chunk of code will be far more complex and finding the error will require checking all 100 steps as one, and usually it would be easier to find a specific needle in a stack of similarly shaped needles.  The goal is to strive for simplicity either in the solution, or at least by simplifying every process down to as many, independent, testable, simple tasks as possible.  For the tasks that really can’t be done completely independently, minimally take those tasks and break them down into simpler steps that can be tested independently.  Like working out division problems longhand, have each step of the larger problem verified and tested.

  Read the article

• TDE Tablespace Encryption 11.2.0.1 Certified with EBS 11i

  - by Steven Chan

  Oracle Advanced Security is an optional licenced Oracle 11g Database add-on.  Oracle Advanced Security Transparent Data Encryption (TDE) offers two different features:  column encryption and tablespace encryption.  TDE Tablespace Encryption 11.2.0.1 is now certified with Oracle E-Business Suite Release 11i. What is Transparent Data Encryption (TDE) ? Oracle Advanced Security Transparent Data Encryption (TDE) allows you to protect data at rest. TDE helps address privacy and PCI requirements by encrypting personally identifiable information (PII) such as Social Security numbers and credit card numbers. TDE is completely transparent to existing applications with no triggers, views or other application changes required. Data is transparently encrypted when written to disk and transparently decrypted after an application user has successfully authenticated and passed all authorization checks. Authorization checks include verifying the user has the necessary select and update privileges on the application table and checking Database Vault, Label Security and Virtual Private Database enforcement policies.

  Read the article

• Simple blogging software (WP replacement)

  - by jontes

  I'm sorry if this is not the right place to ask this question, but I think it's certainly better than at stackoverflow.com. I'm planning to redesign my website and looking for a WordPress replacement for my blog. My requirements are: simple (I won't do a large, complicated website) and lucid well coded (OOP), extensions, templates, active development (not 3 years old) nice but temperate text editor (+images, links), tags and categories, page break easy integration with Flickr, Picasa and social networks technology: PHP and MySQL, not cloud service (like Posterous or Tumblr) Could you recommend me some blogging software which would meet these criteria?

  Read the article

• How do I update ItemTemplate after scrambling ObservableCollection(Of ObservableCollection(Of object

  - by user342195

  I am learning vb.net, wpf and xaml with the help of sites like this one. The project I am currently working on is a 4 x 4 slide puzzle. I cannot get the buttons in the grid to scramble to start a new game when calling a new game event. Any help will be greatly appreciated. If no answer is can be provide, a good resource to research would help as well. Thank you for your time. XAML: <Window x:Class="SlidePuzzle" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Slide Puzzle" Height="391" Width="300" Name="wdw_SlidePuzzle"> <Window.Resources> <DataTemplate x:Key="DataTemp_PuzzleButtons"> <Button Content="{Binding C}" Height="50" Width="50" Margin="2" Visibility="{Binding V}"/> </DataTemplate> <DataTemplate x:Key="DataTemplate_PuzzleBoard"> <ItemsControl ItemsSource="{Binding}" ItemTemplate="{DynamicResource DataTemp_PuzzleButtons}"> <ItemsControl.ItemsPanel> <ItemsPanelTemplate> <Canvas/> </ItemsPanelTemplate> </ItemsControl.ItemsPanel> <ItemsControl.ItemContainerStyle> <Style> <Setter Property="Canvas.Top" Value="{Binding Path=Y}" /> <Setter Property="Canvas.Left" Value="{Binding Path=X}" /> </Style> </ItemsControl.ItemContainerStyle> </ItemsControl> </DataTemplate> </Window.Resources> <DockPanel Name="dpanel_puzzle" LastChildFill="True"> <WrapPanel DockPanel.Dock="Bottom" Margin="5" HorizontalAlignment="Center"> <Button Name="bttnNewGame" Content="New Game" MinWidth="75" Margin="4" Click="NewGame_Click"></Button> <Button Name="bttnSolveGame" Content="Solve" MinWidth="75" Margin="4"></Button> <Button Name="bttnExitGame" Content="Exit" MinWidth="75" Margin="4" Click="ExitGame_Click"></Button> </WrapPanel> <WrapPanel DockPanel.Dock="Bottom" Margin="5" HorizontalAlignment="Center"> <Label>Score:</Label> <TextBox Name="tb_Name" Width="50"></TextBox> </WrapPanel> <StackPanel Name="SlidePuzzlePnl" HorizontalAlignment="Center" VerticalAlignment="Center" Height="206" Width="206" > <ItemsControl x:Name="lst" ItemTemplate="{DynamicResource DataTemplate_PuzzleBoard}"/> </StackPanel> </DockPanel> VB: Imports System.Collections.ObjectModel Class SlidePuzzle Dim puzzleColl As New ObservableCollection(Of ObservableCollection(Of SlidePuzzleBttn)) Dim puzzleArr(3, 3) As Integer Private Sub Window1_Loaded(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Handles MyBase.Loaded For i As Integer = 0 To 3 puzzleColl.Add(New ObservableCollection(Of SlidePuzzleBttn)) For j As Integer = 0 To 3 puzzleArr(i, j) = (i * 4) + (j + 1) puzzleColl(i).Add(New SlidePuzzleBttn((i * 4) + (j + 1))) puzzleColl(i)(j).X = j * 52 puzzleColl(i)(j).Y = i * 52 Next Next lst.ItemsSource = puzzleColl End Sub Private Sub NewGame_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs) Dim rnd As New Random Dim ri, rj As Integer Dim temp As Integer For i As Integer = 0 To 3 For j As Integer = 0 To 3 ri = rnd.Next(0, 3) rj = rnd.Next(0, 3) temp = puzzleArr(ri, rj) puzzleArr(ri, rj) = puzzleArr(i, j) puzzleArr(i, j) = temp puzzleColl(i)(j).X = j * 52 puzzleColl(i)(j).Y = i * 52 puzzleColl(i)(j).C = puzzleArr(i, j) Next Next End Sub End Class Public Class SlidePuzzleBttn Inherits DependencyObject Private _c As Integer Private _x As Integer Private _y As Integer Private _v As String Public Shared ReadOnly ContentProperty As DependencyProperty = DependencyProperty.RegisterAttached("_c", GetType(String), GetType(SlidePuzzleBttn), New UIPropertyMetadata("")) Public Sub New() _c = 0 _x = 0 _y = 0 _v = SetV(_c) End Sub Public Sub New(ByVal cVal As Integer) _c = cVal _x = 0 _y = 0 _v = SetV(cVal) End Sub Public Property C() As Integer Get Return _c End Get Set(ByVal value As Integer) _c = value End Set End Property Public Property X() As Integer Get Return _x End Get Set(ByVal value As Integer) _x = value End Set End Property Public Property Y() As Integer Get Return _y End Get Set(ByVal value As Integer) _y = value End Set End Property Public Property V() As String Get Return _v End Get Set(ByVal value As String) _v = value End Set End Property Private Function SetV(ByRef cVal As Integer) As String If cVal = 16 Then Return "Hidden" Else Return "Visible" End If End Function End Class

  Read the article

• Installing Oracle 11gR2 on RHEL 6.2

  - by Chris

  Hello all I'm having some difficulty installing Oracle 11gR2 on RHEL 6.2 I have compiled a giant list of every single step I have taken so far I installed RHEL 6.2 on VMWARE it did it's easy install automatically I Selected 4gb of memory Selected max size of 80Gb Selected 2 processors Sorry for the bad styling copy paste isn't working correctly The version of oracle i downloaded is Linux x86-64 11.2.0.1 I am installing this on a local machine NOT a remote machine I followed the following documentation http://docs.oracle.com/cd/E11882_01/install.112/e24326/toc.htm I bolded the steps which I was least sure about from my research Easy installed with RHEL 6.2 for VMWARE Registered with red hat so I can get updates Reinstalled vmware-tools by pressing enter at every choice Sudo yum update at the end something about GPG key selected y then y Checked Memory Requirements grep MemTotal /proc/meminfo MemTotal: 3921368 kb uname -m x86_64 grep SwapTotal /proc/meminfo SwapTotal: 6160376 kb free total used free shared buffers cached Mem: 3921368 2032012 1889356 0 76216 1533268 -/+ buffers/cache: 422528 3498840 Swap: 6160376 0 6160376 df -h /dev/shm Filesystem Size Used Avail Use% Mounted on tmpfs 1.9G 276K 1.9G 1% /dev/shm df -h /tmp Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 73G 2.7G 67G 4% / tmpfs 1.9G 276K 1.9G 1% /dev/shm /dev/sda1 291M 58M 219M 21% /boot All looked fine to me except maybe for swap? Software Requirements cat /proc/version Linux version 2.6.32-220.el6.x86_64 ([email protected]) (gcc version 4.4.5 20110214 (Red Hat 4.4.5-6) (GCC) ) #1 SMP Wed Nov 9 08:03:13 EST 2011 uname -r 2.6.32-220.el6.x86_64 (same as above but whatever) According to the tutorial should be On Red Hat Enterprise Linux 6 2.6.32-71.el6.x86_64 or later These are the versions of software I have installed binutils-2.20.51.0.2-5.28.el6.x86_64 compat-libcap1-1.10-1.x86_64 compat-libstdc++-33-3.2.3-69.el6.x86_64 compat-libstdc++-33.i686 0:3.2.3-69.el6 gcc-4.4.6-3.el6.x86_64 gcc-c++.x86_64 0:4.4.6-3.el6 glibc-2.12-1.47.el6_2.12.x86_64 glibc-2.12-1.47.el6_2.12.i686 glibc-devel-2.12-1.47.el6_2.12.x86_64 glibc-devel.i686 0:2.12-1.47.el6_2.12 ksh.x86_64 0:20100621-12.el6_2.1 libgcc-4.4.6-3.el6.x86_64 libgcc-4.4.6-3.el6.i686 libstdc++-4.4.6-3.el6.x86_64 libstdc++.i686 0:4.4.6-3.el6 libstdc++-devel.i686 0:4.4.6-3.el6 libstdc++-devel-4.4.6-3.el6.x86_64 libaio-0.3.107-10.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-devel-0.3.107-10.el6.x86_64 libaio-devel-0.3.107-10.el6.i686 make-3.81-19.el6.x86_64 sysstat-9.0.4-18.el6.x86_64 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.i686 8. Probably screwed up here or step 9 /usr/sbin/groupadd oinstall /usr/sbin/groupadd dba(not sure why this isn't in the tutorial) /usr/sbin/useradd -g oinstall -G dba oracle passwd oracle /sbin/sysctl -a | grep sem Xkernel.sem = 250 32000 32 128 /sbin/sysctl -a | grep shm kernel.shmmax = 68719476736 kernel.shmall = 4294967296 kernel.shmmni = 4096 vm.hugetlb_shm_group = 0 /sbin/sysctl -a | grep file-max Xfs.file-max = 384629 /sbin/sysctl -a | grep ip_local_port_range Xnet.ipv4.ip_local_port_range = 32768 61000 /sbin/sysctl -a | grep rmem_default Xnet.core.rmem_default = 124928 /sbin/sysctl -a | grep rmem_max Xnet.core.rmem_max = 131071 /sbin/sysctl -a | grep wmem_max Xnet.core.wmem_max = 131071 /sbin/sysctl -a | grep wmem_default Xnet.core.wmem_default = 124928 Here is my sysctl.conf file I only added the items that were bigger: Kernel sysctl configuration file for Red Hat Linux # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and sysctl.conf(5) for more details. Controls IP packet forwarding net.ipv4.ip_forward = 0 Controls source route verification net.ipv4.conf.default.rp_filter = 1 Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 Controls whether core dumps will append the PID to the core filename. Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 Controls the maximum size of a message, in bytes kernel.msgmnb = 65536 Controls the default maxmimum size of a mesage queue kernel.msgmax = 65536 Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 /sbin/sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 error: "net.bridge.bridge-nf-call-ip6tables" is an unknown key error: "net.bridge.bridge-nf-call-iptables" is an unknown key error: "net.bridge.bridge-nf-call-arptables" is an unknown key kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048576 su - oracle ulimit -Sn 1024 ulimit -Hn 1024 ulimit -Su 1024 ulimit -Hu 30482 ulimit -Su 1024 ulimit -Ss 10240 ulimit -Hs unlimited su - nano /etc/security/limits.conf *added to the end of the file * oracle soft nproc 2047 oracle hard nproc 16384 oracle soft nofile 1024 oracle hard nofile 65536 oracle soft stack 10240 exit exit su - mkdir -p /app/ chown -R oracle:oinstall /app/ chmod -R 775 /app/ 9. THIS IS PROBABLY WHERE I MESSED UP I then exited out of the root account so now I'm back in my account chris then I su - oracle echo $SHELL /bin/bash umask 0022 (so it should be set already to what is neccesary) Also from what I have read I do not need to set the DISPLAY variable because I'm installing this on the localhost I then opened the .bash_profile of the oracle and changed it to the following .bash_profile Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi User specific environment and startup programs PATH=$PATH:$HOME/bin; export PATH ORACLE_BASE=/app/oracle ORACLE_SID=orcl export ORACLE_BASE ORACLE_SID I then shutdown the virtual machine shared my desktop folder from my windows 7 then turned back on the virtual machine logged in as chris opened up a terminal then: su - for some reason the shared folder didn't appear so I reinstalled vmware tools again and restarted then same as before su - cp -R linux_oracle/database /db; chown -R oracle:oinstall /db; chmod -R 775 /db; ll /db drwxrwxr-x. 8 oracle oinstall 4096 Jun 5 06:20 database exit su - oracle cd /db/database ./runInstaller AND FINALLY THE INFAMOUS JAVA:132 ERROR MESSAGE Starting Oracle Universal Installer... Checking Temp space: must be greater than 80 MB. Actual 65646 MB Passed Checking swap space: must be greater than 150 MB. Actual 6015 MB Passed Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-05_06-47-12AM. Please wait ...[oracle@localhost database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-05_06-47-12AM/jdk/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1647) at java.lang.Runtime.load0(Runtime.java:769) at java.lang.System.load(System.java:968) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668) at java.lang.Runtime.loadLibrary0(Runtime.java:822) at java.lang.System.loadLibrary(System.java:993) at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50) at java.security.AccessController.doPrivileged(Native Method) at java.awt.Toolkit.loadLibraries(Toolkit.java:1509) at java.awt.Toolkit.(Toolkit.java:1530) at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source) at com.jgoodies.looks.LookUtils.(Unknown Source) at com.jgoodies.looks.plastic.PlasticLookAndFeel.(PlasticLookAndFeel.java:122) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:242) at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783) at javax.swing.UIManager.setLookAndFeel(UIManager.java:480) at oracle.install.commons.util.Application.startup(Application.java:758) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164) at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181) at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265) at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114) at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)

  Read the article

• Best Practices For Database Consolidation On Exadata - New Whitepapers

  - by Javier Puerta

   Best Practices For Database Consolidation On Exadata Database Machine (Nov. 2011) Consolidation can minimize idle resources, maximize efficiency, and lower costs when you host multiple schemas, applications or databases on a target system. Consolidation is a core enabler for deploying Oracle database on public and private clouds.This paper provides the Exadata Database Machine (Exadata) consolidation best practices to setup and manage systems and applications for maximum stability and availability:Download here Oracle Exadata Database Machine Consolidation: Segregating Databases and Roles (Sep. 2011) This paper is focused on the aspects of segregating databases from each other in a platform consolidation environment on an Oracle Exadata Database Machine. Platform consolidation is the consolidation of multiple databases on to a single Oracle Exadata Database Machine. When multiple databases are consolidated on a single Database Machine, it may be necessary to isolate certain database components or functions in order to meet business requirements and provide best practices for a secure consolidation. In this paper we outline the use of Oracle Exadata database-scoped security to securely separate database management and provide a detailed case study that illustrates the best practices. Download here

  Read the article

< Previous Page | 552 553 554 555 556 557 558 559 560 561 562 563  | Next Page >