Search Results

Search found 19525 results on 781 pages for 'say'.

Page 557/781 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

• Outlying DBAs

  - by steveh99999

  Read an interesting book recently, ‘Outliers – the story of success’ by Malcolm Gladwell. There’s a good synopsis of the book here on wikipedia. I don’t want to write in detailed review of the book, but it’s well worth a read. There were a couple of sections which I thought were possibly relevant to IT professionals and DBAs in particular. Firstly, ‘the 10,000 hour rule’, in this section Gladwell asserts that to be a real ‘elite performer’ takes 10,000 hours of practice. ‘Practice isn’t the thing you do once you’re good, it’s the thing you do that makes you good’.  He gives many interesting examples – the Beatles, Bill Gates etc – but I was wondering could this be applied to DBAs ? If it takes 10,000 hours to be a really elite DBA – how long does that really take ? 8 hours a day makes 1250 days. If we assume that most DBAs work around 230 days a year – then it takes around 5 and a half years to become an elite DBA.   But how much time per day does a DBA spend actually doing DBA work ? Certainly it’s my experience that the more experienced I get as a DBA, the less time I seem to spend actually doing DBA work – ie meetings, change-control meetings, project planning, liasing with other teams, appraisals etc.  Is it more accurate to assume that a DBA spends half their time actually doing ‘real’ DBA work – or is that just my bad luck ?   So, in reality, I’d argue it can take at least 5 1/2 and more likely closer to 10 years to become an elite DBA. Why do I keep receiving CVs for senior DBAs with 2-4 years actual DBA experience ? In the second section I found particularly interesting, Gladwell writes about analysis of plane crashes and the importance of in-cockpit communications. He describes a couple of crashes involving Korean Airlines – where co-pilots were often deferrential to pilots, and unwilling to openly criticise their more senior colleagues or point out errors when things were going badly wrong… There’s a better summary of Gladwell’s concepts on mitigation  here – but to apply this to a DBA role… If you are a DBA and you do not agree with  a decision of one of your superiors, then it’s your duty as a DBA to say what you think is wrong, before it’s too late…  Obviously there’s a fine line between constructive criticism and moaning, but a good senior DBA or manager should be able to take well-researched criticism\debate from a more junior DBA.   Is this really possible ?

  Read the article

• More Efficient Data Structure for Large Layered Tile Map

  - by Stupac

  It seems like the popular method is to break the map up into regions and load them as needed, my problem is that in my game there are many AI entities other than the player out performing actions in virtually all the regions of the map. Let's just say I have a 5000x5000 map, when I use a 2D array of byte's to render it my game uses around 17 MB of memory, as soon as I change that data structure to a my own defined MapCell class (which only contains a single field: byte terrain) my game's memory consumption rockets up to 400+ MB. I plan on adding layering, so an array of byte's won't cut it and I figure I'd need to add a List of some sort to the MapCell class to provide objects in the layers. I'm only rendering tiles that are on screen, but I need the rest of the map to be represented in memory since it is constantly used in Update. So my question is, how can I reduce the memory consumption of my map while still maintaining the above requirements? Thank you for your time! Here's a few snippets my C# code in XNA4: public static void LoadMapData() { // Test map generations int xSize = 5000; int ySize = 5000; MapCell[,] map = new MapCell[xSize,ySize]; //byte[,] map = new byte[xSize, ySize]; Terrain[] terrains = new Terrain[4]; terrains[0] = grass; terrains[1] = dirt; terrains[2] = rock; terrains[3] = water; Random random = new Random(); for(int x = 0; x < xSize; x++) { for(int y = 0; y < ySize; y++) { //map[x,y] = new MapCell(terrains[random.Next(4)]); map[x,y] = new MapCell((byte)random.Next(4)); //map[x, y] = (byte)random.Next(4); } } testMap = new TileMap(map, xSize, ySize); // End test map setup currentMap = testMap; } public class MapCell { //public TerrainType terrain; public byte terrain; public MapCell(byte itsTerrain) { terrain = itsTerrain; } // the type of terrain this cell is treated as /*public Terrain terrain { get; set; } public MapCell(Terrain itsTerrain) { terrain = itsTerrain; }*/ }

  Read the article

• Storing game objects with generic object information

  - by Mick

  In a simple game object class, you might have something like this: public abstract class GameObject { protected String name; // other properties protected double x, y; public GameObject(String name, double x, double y) { // etc } // setters, getters } I was thinking, since a lot of game objects (ex. generic monsters) will share the same name, movement speed, attack power, etc, it would be better to have all that information shared between all monsters of the same type. So I decided to have an abstract class "ObjectData" to hold all this shared information. So whenever I create a generic monster, I would use the same pre-created "ObjectData" for it. Now the above class becomes more like this: public abstract class GameObject { protected ObjectData data; protected double x, y; public GameObject(ObjectData data, double x, double y) { // etc } // setters, getters public String getName() { return data.getName(); } } So to tailor this specifically for a Monster (could be done in a very similar way for Npcs, etc), I would add 2 classes. Monster which extends GameObject, and MonsterData which extends ObjectData. Now I'll have something like this: public class Monster extends GameObject { public Monster(MonsterData data, double x, double y) { super(data, x, y); } } This is where my design question comes in. Since MonsterData would hold data specific to a generic monster (and would vary with what say NpcData holds), what would be the best way to access this extra information in a system like this? At the moment, since the data variable is of type ObjectData, I'll have to cast data to MonsterData whenever I use it inside the Monster class. One solution I thought of is this, but this might be bad practice: public class Monster extends GameObject { private MonsterData data; // <- this part here public Monster(MonsterData data, double x, double y) { super(data, x, y); this.data = data; // <- this part here } } I've read that for one I should generically avoid overwriting the underlying classes variables. What do you guys think of this solution? Is it bad practice? Do you have any better solutions? Is the design in general bad? How should I redesign this if it is? Thanks in advanced for any replies, and sorry about the long question. Hopefully it all makes sense!

  Read the article

• How do I get long command lines to wrap to the next line?

  - by BrianH

  Edit It was my .bashrc file. I've copied the same profile from machine to machine, and I used special characters in my $PS1 that are somehow throwing it off. I'm now sticking with the standard bash variables for my $PS1. Thanks to @ændrük for the tip on the .bashrc! ...End Edit... Something I have noticed in Ubuntu for a long time that has been frustrating to me is when I am typing a command at the command line that gets longer (wider) than the terminal width, instead of wrapping to a new line, it goes back to column 1 on the same line and starts over-writing the beginning of my command line. (It doesn't actually overwrite the actual command, but visually, it is overwriting the text that was displayed). It's hard to explain without seeing it, but let's say my terminal was 20 characters wide (Mine is more like 120 characters - but for the sake of an example), and I want to echo the English alphabet. What I type is this: echo abcdefghijklmnopqrstuvwxyz But what my terminal looks like before I hit the key is: pqrstuvwxyzghijklmno When I hit enter, it echos abcdefghijklmnopqrstuvwxyz so I know the command was received properly. It just wrapped my typing after the "o" and started over on the same line. What I would expect to happen, if I typed this command in on a terminal that was only 20 characters wide would be this: echo abcdefghijklmno pqrstuvwxyz Background: I am using bash as my shell, and I have this line in my ~/.bashrc: set -o vi to be able to navigate the command line with VI commands. I am currently using Ubuntu 10.10 server, and connecting to the server with Putty. In any other environment I have worked in, if I type a long command line, it will add a new line underneath the line I am working on when my command gets longer than the terminal width and when I keep typing I can see my command on 2 different lines. But for as long as I can remember using Ubuntu, my long commands only occupy 1 line. This also happens when I am going back to previous commands in the history (I hit Esc, then 'K' to go back to previous commands) - when I get to a previous command that was longer than the terminal width, the command line gets mangled and I cannot tell where I am at in the command. The only work-around I have found to see the entire long command is to hit "Esc-V", which opens up the current command in a VI editor. I don't think I have anything odd in my .bashrc file. I commented out the "set -o vi" line, and I still had the problem. I downloaded a fresh copy of Putty and didn't make any changes to the configuration - I just typed in my host name to connect, and I still have the problem, so I don't think it's anything with Putty (unless I need to make some config changes) Has anyone else had this problem, and can anyone think of how to fix it? Thanks in advance! Brian

  Read the article

• Data structures for a 2D multi-layered and multi-region map?

  - by DevilWithin

  I am working on a 2D world editor and a world format subsequently. If I were to handle the game "world" being created just as a layered set of structures, either in top or side views, it would be considerably simple to do most things. But, since this editor is meant for 3rd parties, I have no clue how big worlds one will want to make and I need to keep in mind that eventually it will become simply too much to check, handling and comparing stuff that are happening completely away from the player position. I know the solution for this is to subdivide my world into sub regions and stream them on the fly, loading and unloading resources and other data. This way I know a virtually infinite game area is achievable. But, while I know theoretically what to do, I really have a few questions I'd hoped to get answered for some hints about the topic. The logic way to handle the regions is some kind of grid, would you pick evenly distributed blocks with equal sizes or would you let the user subdivide areas by taste with irregular sized rectangles? In case of even grids, would you use some kind of block/chunk neighbouring system to check when the player transposes the limit or just put all those in a simple array? Being a region a different data structure than its owner "game world", when streaming a region, would you deliver the objects to the parent structures and track them for unloading later, or retain the objects in each region for a more "hard-limit" approach? Introducing the subdivision approach to the project, and already having a multi layered scene graph structure on place, how would i make it support the new concept? Would you have the parent node have the layers as children, and replicate in each layer node, a node per region? Or the opposite, parent node owns all the regions possible, and each region has multiple layers as children? Or would you just put the region logic outside the graph completely(compatible with the first suggestion in Q.3) When I say virtually infinite worlds, I mean it of course under the contraints of the variable sizes and so on. Using float positions, a HUGE world can already be made. Do you think its sane to think beyond that? Because I think its ok to stick to this limit since it will never be reached so easily.. As for when to stream a region, I'm implementing it as a collection of watcher cameras, which the streaming system works with to know what to load/unload. The problem here is, i will be needing some kind of warps/teleports built in for my game, and there is a chance i will be teleporting a player to a unloaded region far away. How would you approach something like this? Is it sane to load any region to memory which can be teleported to by a warp within a radius from the player? Sorry for the huge question, any answers are helpful!

  Read the article

• Stop trying to be perfect

  - by Kyle Burns

  Yes, Bob is my uncle too.  I also think the points in the Manifesto for Software Craftsmanship (manifesto.softwarecraftsmanship.org) are all great.  What amazes me is that tend to confuse the term “well crafted” with “perfect”.  I'm about to say something that will make Quality Assurance managers and many development types as well until you think about it as a craftsman – “Stop trying to be perfect”. Now let me explain what I mean.  Building software, as with building almost anything, often involves a series of trade-offs where either one undesired characteristic is accepted as necessary to achieve another desired one (or maybe stave off one that is even less desirable) or a desirable characteristic is sacrificed for the same reasons.  This implies that perfection itself is unattainable.  What is attainable is “sufficient” and I think that this really goes to the heart both of what people are trying to do with Agile and with the craftsmanship movement.  Simply put, sufficient software drives the greatest business value.   I've been in many meetings where “how can we keep anything from ever going wrong” has become the thing that holds us in analysis paralysis.  I've also been the guy trying way too hard to perfect some function to make sure that every edge case is accounted for.  Somewhere in there, something a drill instructor said while I was in boot camp occurred to me.  In response to being asked a question by another recruit having to do with some edge case (I can barely remember the context), he said “What if grasshoppers had machine guns?  Would the birds still **** with them?”  It sounds funny, but there's a lot of wisdom in those words.   “Sufficient” is different for every situation and it’s important to understand what sufficient means in the context of the work you’re doing.  If I’m writing a timesheet application (and please shoot me if I am), I’m going to have a much higher tolerance for imperfection than if you’re writing software to control life support systems on spacecraft.  I’m also likely to have less need for high volume performance than if you’re writing software to control stock trading transactions.   I’d encourage anyone who has read this far to instead of trying to be perfect, try to create software that is sufficient in every way.  If you’re working to make a component that is sufficient “better”, ask yourself if there is any component left that is not yet sufficient.  If the answer is “yes” you’re working on the wrong thing and need to adjust.  If the answer is “no”, why aren’t you shipping and delivering business value?

  Read the article

• On the art of self-promotion

  - by Tony Davis

  I attended Brent Ozar’s Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a ‘perfect storm’ of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one’s work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven’t far more qualified and established commentators, MVPs and so on, already said it? While it’s a good idea to pick reasonably fresh and interesting topics, it’s more important not to let such fears lead to writer’s block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn’t always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what’s involved in getting an application that is ‘done’ ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we’d love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to ‘throw your hat into the ring’, drop us a mail at [email protected]. Cheers, Tony.

  Read the article

• On the art of self-promotion

  - by Tony Davis

  I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

  Read the article

• Gamification in the enterprise updates, September edition

  - by erikanollwebb

  Things have been a little busy here at GamifyOracle.  Last week, I attended a small conference in San Diego on Enterprise Gamification.  Mario Herger of SAP, Matt Landes of Google and I were on a panel discussion about how to introduce and advocate gamification in your organization.  I gave a talk as well as a workshop on gamification.  The workshop was a new concept, to take our Design Jam from Applications User Experience and try it with people outside of user experience.  I have to say, the whole thing was a great success, in great part because I had some expert help from Teena Singh from Apps UX.  We took a flow from expense reporting and created a scenario about sales reps who are on the road a lot and how we needed them to get their expense reports filed by the end of the fiscal year.  We divided the attendees into groups and gave them a little over two hours to work out how they might use game mechanics to gamify the flows.   We even took the opportunity to re-use the app our fab dev team in our Mexico Development Center put together to gamify the event including badges, points, prizes and a leaderboard.  Since I am a firm believer that you can't gamify everything (or at least, not everything well), I focused my talk prior to the workshop on when it works, and when it might not, including pitfalls to gamifying badly.  I was impressed that the teams all considered what might go wrong with gamifying expenses and built into their designs some protections against that.  I can't wait to take this concept on the road again, it really was a fun day. Now that we have gotten through that set of events, we're wildly working on our next project for next week.  I'm doing a focus group at Oracle OpenWorld on Gamification in the Enterprise.  To do that, Andrea Cantu and I are trying to kill as many trees as possible while we work out some gamification concepts to present (see proof below!).  It should be a great event and I'm hoping we learn a lot about what our customers think about the use of gamification in their companies and in the products they use. So that's the news so far from GamifyOracle land.  I'll try to get more out about those events and more after next week. And if you will be at OOW, ping me and we can discuss in person!  I'd love to know what everyone is thinking in the area.

  Read the article

• TechEd 2012: Recap

  - by Tim Murphy

  TechEd this week was a great experience and I wanted to wrap it up with a summary post. First let me say a thank you to John and Jeff from GWB for supplying power, connectivity and a place to work in between sessions.  The blogging hub was a great experience in itself.  Getting to talk with other bloggers and other conference goers turned into a series of interesting conversations.  And where else can you almost end up in the day 1 highlights video? The sessions at TechEd were a mixed bag of value.  The Keynotes rocked, both figuratively and literally and most of the sessions that I want to were a good experience and had gems of information to take away.  There were a few exceptions though.  A couple of the sessions turned out to be sales jobs.  Nothing turns me off more than that (there will be some really honest comments on those surveys). TechEd re-enforced for me that much of the value is not in the sessions, but in the networking opportunities. I got to talk with several Microsoft team members and MVPs as well as some of the vendor representative for companies like Inrule and ComponentOne. Also got to expand both my local and extended community with discussions at meal times and waiting for sessions to start. I think this is one of the benefits that a lot of people don’t take advantage of in these conferences that should be a bigger part of the advertising. Exposure to a wide variety of topics, many of which I had not been able to make time for up to this point was envigorating.  The list of topic includes: Office 365, Windows Server 2012, Windows 8, Metro, Azure.  I can’t wait to get back to work and dig into these subjects in more depth. The one complaint that I had and heard from other attendees was that there weren’t enough sessions that were actually about development.  I realize that TechEd started as an event for IT Pros, but there needs to be more value for the Devs.  It all went by too fast and it will take a couple more days to digest the material, but the batteries are and I’m ready to leverage what I’ve learned.  Hopefully we will do it again next year. del.icio.us Tags: TechEd,TechEd 2012

  Read the article

• Web Development Goes Pre-Visual InterDev

  - by Ken Cox [MVP]

  As a longtime and hardcore ASP.NET webforms developer, I’m finding the new client-side development world a bit of a grind.  I love learning new technologies, but I can’t help feeling we’ve regressed and lost our old RAD advantage as we move heavy lifting to the client. For my latest project, I’m using Telerik’s KendoUI in Visual Studio 2012. To say I feel clumsy writing this much JavaScript is an understatement. It seems like the only safe way to ‘write’ this code is by copying a working snippet from someone else and pasting it into my HTML page.  For me, JavaScript has largely been for small UI tasks like client-side validation and a bit of AJAX – and often emitted by a server-side control. I find myself today lost in nests of curly braces that Ctrl+K, Ctrl+D doesn’t seem to understand that well either. IntelliSense, my old syntax saviour, doesn’t seem to have kept up with this cobweb of code either. Code completion? Not seeing it. As I fumbled about this evening, I thought about how web development rocketed forward when Microsoft introduced Visual InterDev. Its Design-Time Controls (DTCs) changed the way we created sites. All the iterations of Visual Studio have enhanced that server-side experience where you let a tool write the bulk of the code and manually finesse it from there. What happened? Why am I typing  properties and values (especially default values!) into VS 2012 to get a client-side grid on a page? Where are the drag and drop objects that traditionally provided 70 percent of the mark-up and configuration?  Did we forget how to write Property Pages where you enter a value and the correct syntax appears magically in the source code? To me, the tooling was looking the other way as the scene shifted from server-side code to nimble client-side script. It’ll have to catch up. Although JavaScript is the lingua franca of web browsers, the language is unwieldy, tough to maintain, and messy to debug. If a .NET JIT compiler can turn our VB, F#, and C# source code into an Intermediate Language that executes on a computer, I don’t see why there can’t be a client-side compiler that turns a .NET language into JavaScript that browsers can consume.

  Read the article

• Need help fixing DPKG errors after update from 12.04 to 12.10

  - by James Wulfe

  So I was doing fine then i upgraded my system to 12.10 and now i cant get my system to update all of its packages properly. no matter what i do, what is happening here and how do i fix this. if i would have thought 12.10 would be this much of a hassle i would have never upgraded..... here is a sampling of the code that returns from "apt-get -f install" It should also be noted that it is just these 6 packages only. no other packages have given me this kind of trouble. well i should say as of now. It was just 5, but them i got an update for unity, and now unity-common is added to the trouble makers. which prevents me from further upgrading the actual unity package as this package is a dependancy. Preparing to replace usb-modeswitch-data 20120120-0ubuntu1 (using .../usb-modeswitch-data_20120815-1_all.deb) ... /var/lib/dpkg/info/usb-modeswitch-data.prerm: 4: /var/lib/dpkg/info/usb-modeswitch-data.prerm: dpkg-maintscript-helper: Input/output error dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg: trying script from the new package instead ... /var/lib/dpkg/tmp.ci/prerm: 4: /var/lib/dpkg/tmp.ci/prerm: dpkg-maintscript-helper: Input/output error dpkg: error processing /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb (--unpack): subprocess new pre-removal script returned error exit status 2 /var/lib/dpkg/info/usb-modeswitch-data.postinst: 7: /var/lib/dpkg/info/usb-modeswitch-data.postinst: dpkg-maintscript-helper: Input/output error dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/network-manager_0.9.6.0-0ubuntu7_i386.deb /var/cache/apt/archives/pcmciautils_018-8_i386.deb /var/cache/apt/archives/unity-common_6.10.0-0ubuntu2_all.deb /var/cache/apt/archives/whoopsie_0.2.7_i386.deb /var/cache/apt/archives/usb-modeswitch_1.2.3+repack0-1ubuntu3_i386.deb /var/cache/apt/archives/usb-modeswitch-data_20120815-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I would also like to note i have cleaned apt cashe both through the terminal and manualy, i have tried installing them manually through dpkg from both the /var/cache/apt/archives/ location and from my own manually downloaded .deb files. i have tried using dpkg-reconfigure and i have used bleachbit to clean my system. I have also tested both my HDD and memory and found no significant errors to lead to the input/output errors. Quite frankly i am just out of options and have grown tired of trying to google a solution to this mess but still do not wish to pursue backing up settings and reinstalling the system. Any help would be appreciated. I am only interested in answers, please leave your feeling towards grammar, punctuation, and bias towards how a "post should look" at the door. If you dont have something to contribute towards solving my problem then you are just doing nothing but contributing to it. Thank you.

  Read the article

• Latency Matters

  - by Frederic P

  A lot of interest in low latencies has been expressed within the financial services segment, most especially in the stock trading applications where every millisecond directly influences the profitability of the trader. These days, much of the trading is executed by software applications which are trained to respond to each other almost instantaneously. In fact, you could say that we are in an arms race where traders are using any and all options to cut down on the delay in executing transactions, even by moving physically closer to the trading venue. The Solaris OS network stack has traditionally been engineered for high throughput, at the expense of higher latencies. Knowledge of tuning parameters to redress the imbalance is critical for applications that are latency sensitive. We are presenting in this blog how to configure further a default Oracle Solaris 10 installation to reduce network latency. There are many parameters in fact that can be altered, but the most effective ones are intr_blank_time and intr_blank_packets. These parameters affect on-board network throughput and latency on Solaris systems. If interrupt blanking is disabled, packets are processed by the driver as soon as they arrive, resulting in higher network throughput and lower latency, but with higher CPU utilization. With interrupt blanking disabled, processor utilization can be as high as 80–90% in some high-load web server environments. If interrupt blanking is enabled, packets are processed when the interrupt is issued. Enabling interrupt blanking can result in reduced processor utilization and network throughput, but higher network latency. Both parameters should be set at the same time. You can set these parameters by using the ndd command as follows: # ndd -set /dev/eri intr_blank_time 0 # ndd -set /dev/eri intr_blank_packets 0 You can add them to the /etc/system file as follows: set eri:intr_blank_time 0 set eri:intr_blank_packets 0 The value of the interrupt blanking parameter is a trade-off between network throughput and processor utilization. If higher processor utilization is acceptable for achieving higher network throughput, then disable interrupt blanking. If lower processor utilization is preferred and higher network latency is the penalty, then enable interrupt blanking. Our experience at ISV Engineering is that under controlled experiments the above settings result in reduction of network latency by at least 50%; on a two-socket 3GHz Sun Fire X4170 M2 running Solaris 10 Update 9, the above settings improved ping-pong latency from 60µs to 25-30µs with the on-board NIC.

  Read the article

• 6 Ways to Modernize Your Customer Experience

  - by Mike Stiles

  If customers have changed, if the way they research and shop have changed, if their expectations have changed, if their ability to act on dissatisfaction has changed, but your customer experience has NOT changed, what was once “good enough” may now be crippling. Well, the customer has changed, and why wouldn’t they? You’ve probably changed too in your role as consumer. There’s more info available, it’s easier to get, there’s more choice, you’re more mobile, you’re more connected, it’s easier to buy, and yes, it’s easier to switch brands if experiences don’t meet your now higher expectations. Thanks to technological advances, we as marketers can increasingly work borderline miracles. But if we’re still not adamantly adopting customer centricity, and if we aren’t making the customer experience paramount amongst business goals, the tech is wasted. A far more modern customer experience is called for. Here are 6 ways to get there: 1. Modern Marketing: Marketing data is aggregated and targeted to the right customers, who are getting personal, relevant communications. In return, you’re getting insight that finally properly attributes revenue to your marketing efforts. 2. Modern Selling: Demand is being driven across all channels with modern selling tools. Productivity is up thanks to coordinated communication and selling, and performance is ever optimized using powerful analytics. 3. Modern CPQ: You’re cross-selling and upselling more effectively since reps and channel partners have been empowered with the ability to quickly, automatically generate 100% accurate, customer-friendly quotes complete with price controls and automated approvals. 4. Modern Commerce: You’re leveraging data and delivering personalized, targeted digital experiences to everyone. You’re attracting more visitors, and you’re able to scale and keep up with the market and control the experience. 5. Modern Service: You’re better serving your customers by making it easier for them to engage with your brand, plus you’re lowering your costs by increasing agent and tech support efficiencies. 6. Modern Social: You’re getting faster, deeper, more accurate insights from social and turning content around faster, which then goes out to the right people at the right time in the right place. You’ve also gotten proactive in your service, and customers love that. For far too many brands, the buying journey of Need, Research, Select, Buy, Use, Recommend across the multiple connect points of Social, Mobile, Store, Call Center, Site, Ecommerce is a disconnected mess. Oracle’s approach to CX is to connect every interaction your customer has with your brand, avoiding the revenue losses lousy customer experiences bring. How important is the experience to customers? 94% are willing to pay more of their hard-earned money to have better ones, while a meager 1% say they get the good, consistent experiences they expect. Brands, your words aren’t as loud anymore, so your actions as they relate to customer experience are going to have to do the talking. @mikestiles @oraclesocialPhoto: Julien Tromeur, freeimages.com

  Read the article

• Black screen on latest Nvidia Cards when starting LightDM/Ubuntu

  - by Luis Alvarado

  Today I installed an Nvidia GT440 on my computer, changing the one that existed there, an Nvidia 9500GT. After changing it I started getting a problem where the screen just went black when loading the lightdm login screen (Where I punt my user and password). The thing is, if I disconnect the VGA cable and connect it again I get to see the lightdm greeter and everything works perfect. The problem is that I have to connect/disconnect every time I reboot the PC. I tried installing the 285.xx drivers. Same problem. I removed the Nvidia drivers installed with Jockey, rebooted, same problem. I install the current 280.xx again, same problem. After all that I installed a fresh install of Ubuntu, selected to install the Nvidia drivers while installing it from the livecd. After booting the same problem appeared. Dmesg does not say anything wrong about it. Same goes for the log from Jockey. What else should I check or what to do to solve it. Just to clarify, this does not happen BEFORE the lightdm greeter appears. Am guessing before the actual use of the video card with X starts with all the 2D/3D stuff that is used in ligthdm and unity. I can use any tty and even see the Ubuntu logo when starting. UPDATE: When I open a game in fullscreen the problem appears again. I have to unplug the monitor cable and plug it back in to see the game. Then when I quit the game I have to do it again to see the desktop. UPDATE 2: Today I bought a HDMI cable, connected the video card to the TV am testing it with and it actually did log in correctly without any black screen but it shows the resolution a little over the actual size of the screen. So I see only half of the launcher since the left side of it is hidden outside of the real resolution and the top bar is beyond the resolution. So the black screen is related to the VGA connection.

  Read the article

• Indefinite loops where the first time is different

  - by George T

  This isn't a serious problem or anything someone has asked me to do, just a seemingly simple thing that I came up with as a mental exercise but has stumped me and which I feel that I should know the answer to already. There may be a duplicate but I didn't manage to find one. Suppose that someone asked you to write a piece of code that asks the user to enter a number and, every time the number they entered is not zero, says "Error" and asks again. When they enter zero it stops. In other words, the code keeps asking for a number and repeats until zero is entered. In each iteration except the first one it also prints "Error". The simplest way I can think of to do that would be something like the folloing pseudocode: int number = 0; do { if(number != 0) { print("Error"); } print("Enter number"); number = getInput(); }while(number != 0); While that does what it's supposed to, I personally don't like that there's repeating code (you test number != 0 twice) -something that should generally be avoided. One way to avoid this would be something like this: int number = 0; while(true) { print("Enter number"); number = getInput(); if(number == 0) { break; } else { print("Error"); } } But what I don't like in this one is "while(true)", another thing to avoid. The only other way I can think of includes one more thing to avoid: labels and gotos: int number = 0; goto question; error: print("Error"); question: print("Enter number"); number = getInput(); if(number != 0) { goto error; } Another solution would be to have an extra variable to test whether you should say "Error" or not but this is wasted memory. Is there a way to do this without doing something that's generally thought of as a bad practice (repeating code, a theoretically endless loop or the use of goto)? I understand that something like this would never be complex enough that the first way would be a problem (you'd generally call a function to validate input) but I'm curious to know if there's a way I haven't thought of.

  Read the article

• 50 Billion Served: Java Embedded on Devices

  - by Tori Wieldt

  It doesn't matter if it is 50 billion or 24 billion, just suffice it to stay that there will be MANY connected devices in the year 2020. With just 24 billion devices, they will outnumber humans six to one! So as a developer, you don't want to ignore this opportunity. What if you could use your Java skills and deploy an app to a fraction of these devices (don't be greedy, how about just, say, 118,000 of them)? Fareed Suliman, Java ME Product Manager had lots of good news for Java Developers in his presentation Modernizing the Explosion of Advanced Microcontrollers with Embedded Java at ARM TechCon in Santa Clara, CA last week. "A radical architecture shift is underway in this space, from proprietary to standards-based," he explained.  He pointed out several advantages to using Embedded Java for devices: Java is a proven and open standard. Java provides connectivity, encryption, location, and web services APIs. You don't have to focus on and keep reinventing the plumbing below the JVM. Abstracting the software from the hardware allows you to repeat your app across many devices. Abstracting the software from the hardware allows allows parallel development so you can get your app done more quickly. You already know Java (or you can hire lots of Java talent). Java is a full ecosystem, with Java Embedded plugins for IDEs like Eclipse and NetBeans. Java ME allows for in-field software upgrades. Suliman mentioned two ways developers can start using Java Embedded today:  Java ME Embedded Suite 7.0 Oracle Java Embedded Suite is a new packaged solution from Oracle (including Java DB, GlassFish for Embedded Suite, Jersey Web Services Framework, and Oracle Java SE Embedded 7 platform), created to provide value added services for collecting, managing, and transmitting data to embedded devices such as gateways and concentrators. Oracle Java ME Embedded 3.2 Oracle Java ME Embedded 3.2 is designed and optimized to meet the unique requirements of small embedded, low power devices such as micro-controllers and other resource-constrained hardware without screens or user interfaces. Think tiny. Really tiny. And think big.  Read more about Java Embedded at the Oracle Technology Network, and read The Java Source blog Java Embedded Releases from September.

  Read the article

• MSFT new trick to promote IE9 by kill IE6 first.

  - by anirudha

  Every developer know every issue on development for IE6 whenever they know things more. they are frustrated whenever they spent time in IE6 for making application cross browser compatible. not long time ago MSFT make a campaign save IE6 you can find the reference http://blogs.msdn.com/b/anna/archive/2009/04/01/save-internet-explorer-6.aspx and the webstite is here http://www.saveie6.com/ well they really make joke see what they write on the page. well why website maked in PHP whenever they can make them in asp.net or any other technology who reflect the Microsoft technology see here  http://www.saveie6.com/compare.php High security (many updates) :- you can find IE6 is how much secure you can also read Wikipedia for know. well i can say IE6 is very easily to hack. wikipedia tell you about that here http://en.wikipedia.org/wiki/Internet_Explorer_6 and for know about the security watch here http://www.google.co.in/webhp?hl=en#sclient=psy&hl=en&site=webhp&q=ie6+security+issues Lightweight (no support for silly PNG transparency, etc) :- well they tell PNG silly but tell me about the best format on internet. their is no better option as png or SVG. More screen space thanks to no tabs:-  they tell this nonsense without think anything. if they really care about more screen space why they make tab  in 7,8,9. conclusion:- IE team make a research on how to promote IE9 better then they can beat chrome and Firefox. because IE9 not have anything good like customization , plug-in ,add-ons , personas , themes and many other thing like chrome and Firefox provided perhaps IE is outdated thing even everyone their can writing about these days that IE9 have this, have performance better then this… the main problem in IE is IE6. many developer hate them because many of their time goes for making site cross browser compatible. in 2009 they still have no blah like IE9 who they have today so they make a campaign for save IE6. the list they make is a joke. they show that everything in IE6 is perfect even everyone know the truth. they listed IE6 is high security. in 2011 their is a problem for IE9 promotion called IE6. because developer hate IE6 how they can promote IE9 very well. so destroy IE6 is only option for IE9 make promote better. so you can see they make two different different campaign and both are opposite of other. well  how we can believe in IE9. thanks for reading this post. what you thinking on it. have a idea or feedback reported them.

  Read the article

• How to become a good team player?

  - by Nick

  I've been programming (obsessively) since I was 12. I am fairly knowledgeable across the spectrum of languages out there, from assembly, to C++, to Javascript, to Haskell, Lisp, and Qi. But all of my projects have been by myself. I got my degree in chemical engineering, not CS or computer engineering, but for the first time this fall I'll be working on a large programming project with other people, and I have no clue how to prepare. I've been using Windows all of my life, but this project is going to be very unix-y, so I purchased a Mac recently in the hopes of familiarizing myself with the environment. I was fortunate to participate in a hackathon with some friends this past year -- both CS majors -- and excitingly enough, we won. But I realized as I worked with them that their workflow was very different from mine. They used Git for version control. I had never used it at the time, but I've since learned all that I can about it. They also used a lot of frameworks and libraries. I had to learn what Rails was pretty much overnight for the hackathon (on the other hand, they didn't know what lexical scoping or closures were). All of our code worked well, but they didn't understand mine, and I didn't understand theirs. I hear references to things that real programmers do on a daily basis -- unit testing, code reviews, but I only have the vaguest sense of what these are. I normally don't have many bugs in my little projects, so I have never needed a bug tracking system or tests for them. And the last thing is that it takes me a long time to understand other people's code. Variable naming conventions (that vary with each new language) are difficult (__mzkwpSomRidicAbbrev), and I find the loose coupling difficult. That's not to say I don't loosely couple things -- I think I'm quite good at it for my own work, but when I download something like the Linux kernel or the Chromium source code to look at it, I spend hours trying to figure out how all of these oddly named directories and files connect. It's a programming sin to reinvent the wheel, but I often find it's just quicker to write up the functionality myself than to spend hours dissecting some library. Obviously, people who do this for a living don't have these problems, and I'll need to get to that point myself. Question: What are some steps that I can take to begin "integrating" with everyone else? Thanks!

  Read the article

• why are my players drawn to the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

• Shelving &ndash; What is it &ndash; and more importantly, can it help me?

  - by Chris Skardon

  Since we shifted to TFS we’ve had the ability to perform what is known as ‘shelving’. Shelving (whilst not a wholly new topic in the world of SCC) is new to us, and didn’t exist in our previous SCC solution – SVN. Soo… what is it? What? Shelving is a way to check-in but not check-in your code. By shelving you submit a copy of your ‘pending changes’ to the SCC server, (which maintains a list of the shelvesets) and once that is done you can either continue working, or undo your changes, safe in the knowledge that a backup copy exists on the server. You can unshelve your code at any time and get back to the state you were when you shelved. Yer, that is great but why not just check it in?? Shelvesets don’t have to build. The shelveset you put in there could be entirely broken, or it might solve every bug in the system – shelves aren’t continuously integrated so you can shelve anything. Hmmmm… What else? Shelving allows us to do some pretty cool stuff that beforehand was quite frankly a pain. For instance – Gated Check-ins are implemented via the shelving mechanism, when code is checked-in, what you’re actually doing is shelving it, the Build Controller will build the shelveset with the original code and if it succeeds, the code will be committed, if it fails – well – it’s only you that has to fix the code :) Other nice features are things like the ability to share code you are working on… For example, if I was having trouble with a particular piece of code, I could shelve it, and then you (yes you) could then get that shelveset and check out the problem for yourself, and if you fix it?? Well – you could check-it in! Nice, but day-to-day shizzle? Let’s say you’ve been working on your project and your project manager comes over to you and says: “Hey, errr, bad times, there is an urgent bug we need you to fix, it needs to go out now!” (also for this to play out – we’ll need to assume you’re currently working in the 'release’ branch for another bug fix (maybe))… You could undo all your current changes (obviously you’ll probably backup your code using zip or something I imagine) fix the bug, then re-copy your backup over the top, or you could shelve and unshelve. Perhaps some other uses will awaken the shelver in you… :) Before each checkin – if you shelve, you no longer need to worry (if indeed you do) about resolving conflicts and mysteriously losing your code… Going home at night? Not checking in straight away? Why not shelve, this way – should the worst come to the worst and your local pc gives up, you can just get the shelveset onto another machine and be up and running in literally seconds minutes…

  Read the article

• How to remove the boundary effects arising due to zero padding in scipy/numpy fft?

  - by Omkar

  I have made a python code to smoothen a given signal using the Weierstrass transform, which is basically the convolution of a normalised gaussian with a signal. The code is as follows: #Importing relevant libraries from __future__ import division from scipy.signal import fftconvolve import numpy as np def smooth_func(sig, x, t= 0.002): N = len(x) x1 = x[-1] x0 = x[0] # defining a new array y which is symmetric around zero, to make the gaussian symmetric. y = np.linspace(-(x1-x0)/2, (x1-x0)/2, N) #gaussian centered around zero. gaus = np.exp(-y**(2)/t) #using fftconvolve to speed up the convolution; gaus.sum() is the normalization constant. return fftconvolve(sig, gaus/gaus.sum(), mode='same') If I run this code for say a step function, it smoothens the corner, but at the boundary it interprets another corner and smoothens that too, as a result giving unnecessary behaviour at the boundary. I explain this with a figure shown in the link below. Boundary effects This problem does not arise if we directly integrate to find convolution. Hence the problem is not in Weierstrass transform, and hence the problem is in the fftconvolve function of scipy. To understand why this problem arises we first need to understand the working of fftconvolve in scipy. The fftconvolve function basically uses the convolution theorem to speed up the computation. In short it says: convolution(int1,int2)=ifft(fft(int1)*fft(int2)) If we directly apply this theorem we dont get the desired result. To get the desired result we need to take the fft on a array double the size of max(int1,int2). But this leads to the undesired boundary effects. This is because in the fft code, if size(int) is greater than the size(over which to take fft) it zero pads the input and then takes the fft. This zero padding is exactly what is responsible for the undesired boundary effects. Can you suggest a way to remove this boundary effects? I have tried to remove it by a simple trick. After smoothening the function I am compairing the value of the smoothened signal with the original signal near the boundaries and if they dont match I replace the value of the smoothened func with the input signal at that point. It is as follows: i = 0 eps=1e-3 while abs(smooth[i]-sig[i])> eps: #compairing the signals on the left boundary smooth[i] = sig[i] i = i + 1 j = -1 while abs(smooth[j]-sig[j])> eps: # compairing on the right boundary. smooth[j] = sig[j] j = j - 1 There is a problem with this method, because of using an epsilon there are small jumps in the smoothened function, as shown below: jumps in the smooth func Can there be any changes made in the above method to solve this boundary problem?

  Read the article

• What are some reasonable stylistic limits on type inference?

  - by Jon Purdy

  C++0x adds pretty darn comprehensive type inference support. I'm sorely tempted to use it everywhere possible to avoid undue repetition, but I'm wondering if removing explicit type information all over the place is such a good idea. Consider this rather contrived example: Foo.h: #include <set> class Foo { private: static std::set<Foo*> instances; public: Foo(); ~Foo(); // What does it return? Who cares! Just forward it! static decltype(instances.begin()) begin() { return instances.begin(); } static decltype(instances.end()) end() { return instances.end(); } }; Foo.cpp: #include <Foo.h> #include <Bar.h> // The type need only be specified in one location! // But I do have to open the header to find out what it actually is. decltype(Foo::instances) Foo::instances; Foo() { // What is the type of x? auto x = Bar::get_something(); // What does do_something() return? auto y = x.do_something(*this); // Well, it's convertible to bool somehow... if (!y) throw "a constant, old school"; instances.insert(this); } ~Foo() { instances.erase(this); } Would you say this is reasonable, or is it completely ridiculous? After all, especially if you're used to developing in a dynamic language, you don't really need to care all that much about the types of things, and can trust that the compiler will catch any egregious abuses of the type system. But for those of you that rely on editor support for method signatures, you're out of luck, so using this style in a library interface is probably really bad practice. I find that writing things with all possible types implicit actually makes my code a lot easier for me to follow, because it removes nearly all of the usual clutter of C++. Your mileage may, of course, vary, and that's what I'm interested in hearing about. What are the specific advantages and disadvantages to radical use of type inference?

  Read the article

• Can a 10-bit monitor connection preserve all tones in 8-bit sRGB gradients on a wide-gamut monitor?

  - by hjb981

  This question is about color management and the use of a higher color depth, 10 bits per channel (30 bits in total, resulting in 1.07 billion colors, or 1024 shades of gray, sometimes referred to as "deep color") compared to the standard of 8 bits per channel (24 bits in total, 16.7 million colors, 256 shades of gray, sometimes referred to as "true color"). Do not confuse with "32 bit color", which usually refers to standard 8 bit color with an extra channel ("alpha channel") for transparency (used to achieve effects like semi-transparent windows etc). The following can be assumed to be in place: 1: A wide-gamut monitor that supports 10-bit input. Further, it can be assumed that the monitor has been calibrated to its native gamut and that an ICC color profile has been created. 2: A graphics card that supports 10-bit output (and is connected to the monitor via DisplayPort). 3: Drivers for the graphics card that support 10-bit output. If applications that support 10-bit output and color profiles would be used, I would expect them to display images that were saved using different color spaces correctly. For example, both an sRGB and an adobeRGB image should be displayed correctly. If an sRGB image was saved using 8 bits per channel (almost always the case), then the 10-bit signal path would ensure that no tonal gradients were lost in the conversion from the sRGB of the image to the native color space of the monitor. For example: If the image contains a pixel that is pure red in 8 bits (255,0,0), the corresponding value in 10 bits would be (1023,0,0). However, since the monitor has a larger color space than sRGB, sending the signal (1023,0,0) to the monitor would result in a red that was too saturated. Therefore, according to the ICC color profile, the signal would be transformed into a different value with less red saturation, for example (987,0,0). Since there are still plenty of levels left between 0 and 987, all 256 values (0-255) for red in the sRGB color space of the file could be uniquely mapped to color-corrected 10-bit values in the monitor's native color space. However, if the conversion was done in 8 bits, (255,0,0) would be translated to (246,0,0), and there would now only be 247 available levels for the red channel instead of 256, degrading the displayed image quality. My question is: how does this work on Ubuntu? Let's say that I use Firefox (which is color-aware and uses ICC color profiles). Would I get 10-bit processing, thus preserving all levels of an 8-bit picture? What is the situation like for other applications, especially photo applications like Shotwell, Rawtherapee, Darktable, RawStudio, Photivo etc? Does Ubuntu differ from other operating systems (Linux and others) on this point?

  Read the article

• Tell me a Story

  - by Geoff N. Hiten

  I recently had a friend ask me to review his resume.  He is a very experienced DBA with excellent skills.  If I had an opening I would have hired him myself.  But not because of the resume.  I know his skill set and skill levels, but there is no way his standard resume can convey that.  A bare bones list of job titles and skills does not set you apart from your competition, nor does it convey whether you have junior or senior level skills and experience.  The solution is to not use the standard format. Tell me a story.  I want to know what you were responsible for.  Describe a tough project and how you saved time/money/personnel on that project.  Link your work activity to business value.  Drop some technical bits in there since we do work in a technical field, but show me what you can do to add value to my business well above what I would pay you.  That will get my attention. The resume exists for one primary and one secondary reason.  The primary reason is to get the interview.  A Resume won’t get you a job, so don’t expect it to.  The secondary reason is to give you and the interviewer a starting point for conversations.  If I can say “Tell me more about when….” and reference an item from your resume, then that is great for both of us.  Of course, you better be able to tell me more, both from the technical and the business side, at least if I am hiring a senior or higher level position.  As for the junior DBAs, go ahead and tell your story too.  Don’t worry about how simple or basic your projects or solutions seem.  It is how you solved the problem and what you learned that I am looking for.  If you learn rapidly and think like a DBA, I can work with that, regardless of you current skill level.

  Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >