Search Results

Search found 34971 results on 1399 pages for 'st even'.

Page 557/1399 | < Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >

• Where do I learn about IP blocks and subnets? Or is there just a calculator that does it all for me?

  - by cwd

  Amazon's elastic compute tool (among others) requires the ip block format for their command: ec2-authorize websrv -P tcp -p 80 -s 205.192.0.0/16 I may be doing this wrong, but as far as I can tell I need to use the block format even for a single IP address. 1) So, how would I do that for this IP? 71.75.232.132 Several years ago I took a CCNA class, and I remember going over IPs and subnets, masks, broadcast addresses, class a/b/c networks, etc. However a lot seems to have changed since then - for example I don't think you can tell what "class" a network is in just by looking at it anymore - sometimes they could be multiple classes. 2) Anyhow, my second question is where do I go to get a refresher on all these things? 3) Or should I just be using ipcalc or an online calculator to do it all for me - and if so, which one?

  Read the article

• Can SATA be used to connect computers?

  - by André

  Can SATA be used to connect two computers together, just like a crossover Ethernet cable would do ? I know SATA has no "networking" features and even though a controller may have multiple ports, the drives don't "see" each other, and that in SATA one device acts as the host (the computer) and the other device is some kind of "client" (the storage drive). But still, did anyone attempt to make a kernel module that would make one computer appear as a "client" (so that the host's SATA controller detects it as a standard hard drive) and then set up like a pseudo-Ethernet link or a very high speed serial link (and then run pppd on it and do networking) ? Note : I know this is an unprofessional and totally stupid idea, I'm just asking out of curiosity.

  Read the article

• CentOS: revert python version back to original

  - by NP

  Hi all, I installed python 2.6 using the instructions here on CentOS 5.4. However I realized it was a bad move and I need to revert back to 2.4, which was there originally. Can anyone guide me on how to undo what I did here? In particular, I am not sure how to undo this: Configure ld to find your shared libs: $ cat /etc/ld.so.conf.d/opt-python2.5.conf /opt/python2.5/lib (hit enter) (hit ctrl-d to return to shell) $ ldconfig I tried removing the alias and the symlink and even re-aliasing python to /usr/bin/python, but when I try to install an RPM i get this error: error: Failed dependencies: libpython2.4.so.1.0 is needed by ... Thanks in advance.

  Read the article

• Visual Studio 2005 Open Project Dialog Slow as Molasses

  - by futureelite7

  Whenever I try to open a project in Visual Studio 2005 (Windows XP), my open project dialog become slow as molasses - navigating down one level of folders typically takes almost 60 seconds. Finding the project and opening it can take up 4-5 minutes, which is just ridiculous. I've checked the open project dialogs of other programs - only VS2005 is acting this way. What could be causing this problem and how do I go about solving it (apart from reinstalling VS2005 / windows) (Edit: Even VS2008 on the same machine does not have this problem. I don't know what's wrong.) Thanks!

  Read the article

• Deploy Rails app from Hudson

  - by brad

  I'm using hudson as my CI and it works great, builds run their tests, code metrics, all that good stuff. But at the moment, that's it, no automated deployment, I have to manually do that after. I haven't found any sort of capistrano plugin for hudson and I can't even see where I can just run my cap deploy after a successful build in Hudson. Does anyone have any idea what I need in order to automate a deployment to a testing server on a successful build? I'd like each commit to force a build and in term deploy to testing so I can see everything right away.

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• SQL Server 2008 is not accessible from Windows Server 2008 ?

  - by Albert Widjaja

  Hi, I have successfully configured Windows Server 2008 Enterprise SP2 with SQL Server 2008 Enterprise SP2 all 64 bit, however when I tried to access this particular SQL Server 2008 DB instance from another SQL Server 2008 SSMS in another Windows Server 2008 it failed ? what I did is to disabled the IPv6 IP address using the regedit but still the problem hasn't been fixed even after restart ? I have enabled the named piped as well but still no luck ? any help please ? Here's the error message: " A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) "

  Read the article

• Carbonite has taken over my iMac

  - by Larry Rothfork

  I used Carbonite to back up 75GB on my iMac. I also created a folder on my iMac to copy files to, from an external hard drive and then use Carbonite to back up from there. And THEN thinking I had everything safely backed up and, in order to make room on my hard drive I DELETED some of those files, and instead of increasing disk space..my disk space has shrunk to 2GB... I know, I know..you can't use Carbonite like that, but now I have two questions. 1) What is the explanation for the decrease in disk space even though I have deleted about 20GB of those backed up files from my hard drive? It must have something to do with the way Carbonite references backed up files, And 2) Is there a way to extricate myself from this situation?

  Read the article

• Carbonite has taken over my iMac

  - by Larry Rothfork

  I used Carbonite to back up 75GB on my iMac. I also created a folder on my iMac to copy files to, from an external hard drive and then use Carbonite to back up from there. And THEN thinking I had everything safely backed up and, in order to make room on my hard drive I DELETED some of those files, and instead of increasing disk space..my disk space has shrunk to 2GB... I know, I know..you can't use Carbonite like that, but now I have two questions. 1) What is the explanation for the decrease in disk space even though I have deleted about 20GB of those backed up files from my hard drive? It must have something to do with the way Carbonite references backed up files, And 2) Is there a way to extricate myself from this situation?

  Read the article

• Snow Leopard Servers built in Wiki vs Mediawiki?

  - by semi

  I recently installed Snow Leopard Server and am trying to get the most out of the services it offers, but one thing that currently seems pretty barebones is the Wiki it provides. Can Snow Leopard Servers wiki be modified with plugins the way MediaWiki can? Are there any good plugins to allow you to include templates like MediaWiki? Is there any way to include embeded syntax highlighted example code? Is there even a good name to refer to it as when searching for it? "Snow Leopard Wiki" just turns up a bunch of wikis about SL. Alternatively, how hard is it to install MediaWiki(or some other more advanced wiki engine) on SL Server? Could you plug it in to the same authentication mechanism?

  Read the article

• Sharing Windows Store apps between accounts

  - by Klas Mellbourn

  In Windows 8 it seems natural to me that each person in a family has their own Microsoft Account with which they log in. If you pay for an app on the Windows Store, you can install that same app on several computers using the same Microsoft Account. Good. However, if several persons, in this case my children, each have their own account on the same computer, they do not get access to apps bought on a sibling's account, even if the app has been installed on the same computer. Bad. (Compare this to iOS where you are allowed have several iPhones with different iCloud-connected accounts but all using the same iTunes App Store account, which is perfect for a family where all can then use the same app which was bought just once) Is there any way to share apps between Microsoft Accounts (e.g. members of the same family)? Alternatively, is there a way to run apps that are installed on a computer when you are logged in with a Microsoft Account different than the one used when installing the app?

  Read the article

• *.exe is not a valid win32 application

  - by Sohail

  Hi everybody. recently I've bought a VGA card, "ATI Radeon HD4650", and after that I installed it on my PC, i cant run any .exe files just from my CD-Rom ! even when i attempt to install the driver of VGA Card, I couldn't do that, So I downloaded it and installed it with no problems. after that when I try to install some games from DVD (more than 5 different games I have tried) it prompt me with: "setup.exe is not a valid win32 application" therefore I cant install the game, in addition I need to say that there's nothing wrong with DVD's and my DVD-Rom. I would really appreciate if you just can help me through this one !

  Read the article

• Concurrent backups in SQL Server?

  - by Mikey Cee

  We currently have our backups managed by a third party company. There are a bunch of agent jobs created that take full backups (4 times a day) and transaction log backups (4 times an hour). We now want to manage our backups in house, but don't want to disable the third party's jobs until we are sure that we have everything configured correctly internally So I am proposing to have a short period (say, a couple of days) where backups are being taken both by the old and the new system. I am wondering what the ramifications of having these two different systems both manage backups, and the potential pitfalls of having backups taken simultaneously. Is this even supported? If so, and bearing in mind that the system can cope with one backup without any noticeable performance degradation, is it fairly logical to assume that it should be able to cope with two simultaneous backups? Currently the load on the server is fairly light and it rarely struggles. Any advice is appreciated

  Read the article

• What is your favorite password storage tool?

  - by Marcel Levy

  Aside from personal passwords, I'm always juggling a number of project-specific passwords, including those for network, web and database authentication. Some authentication can be managed with ssh keys and the like, but everywhere I've worked I also faced the need for the management of passwords that need to be available to a number of different people. So what do you use, either for personal or team-based password management? Personally I'd like to hear about cross-platform tools, but I'm sure other people would be satisfied with Windows-only solutions. I know the stackoverflow podcast tackled this issue in #7 and #9, but I'm hoping we can come up with the definitive answer here. Update: Even though this question was asked before its sibling site existed, you should probably add your two cents to the more active question over at superuser, which is a more appropriate venue for this.

  Read the article

• Deploying in windows 2008 [closed]

  - by Blisk

  Possible Duplicate: How is software deployed via Active Directory? I have trying to deploy a programs, mapped network drives and taks schedule job. I didn't manage to start a script on log on PC until I did it in Default Domain Policy. But when I did that I have installed programs on my server too. And mapped network drives, etc. So I don't know how to manage to do all of that but not to install anything on server over GPO. I still didn't manage to deploy a schedule task job on clients. I manage to put it on server bit not on clients. I need that schedule task because I need to update software on clients every week. I can't manual update flash player, adobe reader, firefox, etc on clients. And People useing client PC even doesn't know how to do it if they have abillity. Clients doesn't have admin rights.

  Read the article

• Keyboard with normal layout just without numpad?

  - by Pla

  Do you know any keyboard that does not have a numpad and, at the same time, is not a compact keyboard? I type a lot and I enjoy using standard full sized keyboards. I am annoyed by the presence of the numpad. I've never used it; it just wastes desktop space! All I could find are (even more annoying) compact keyboards. Sadly those keyboards are so compact that cram the arrow keys and the page up/down keys in a very little space. So, does anyone know a keyboard with a normal layout but without the numpad?

  Read the article

• how to compile VTK on Mac Air

  - by Ilan Tal

  I am trying to compile VTK on a Mac after successfully doing so on Linux. I am using CMake 2.8.9 and for a long time I had a problem where it couldn't find jni.h. If anyone else has the problem, the answer is to have JAVA_INCLUDE_PATH2 point to "-framework JavaVM". After that it successfully finds JNI and does a "Configure" followed by "Generate". According to the instructions I have the next step should be easy: in a terminal run "make -j 2". I get a message "-bash: make: command not found". Strange.... I am in the vtkBuild directory, which seems the most reasonable place. I even tried the parent directory where I have the VTK source but that didn't work either. I ran a make under Linux and had no troubles, so what do I need to do with the Mac? Thanks, Ilan

  Read the article

• Can iptables allow Squid to process a request, then redirect the response packets to another port?

  - by Dan H

  I'm trying to test a fancy traffic analyzer app, which I have running on port 8890. My current plan is to let any HTTP request come into Squid, on port 3128, and let it process the request, and then just before it sends the response back, use iptables to redirect the response packets (leaving port 3128) to port 8890. I've researched this all night, and tried many iptables commands, but I'm missing something and my hair is falling out. I thought something like this would work: iptables -t nat -A OUTPUT -p tcp --sport 3128 -j REDIRECT --to-ports 8990 This rule gets created ok, but it never redirects anything. Is this even possible? If so, what iptables incantation could do it? If not, any idea what might work on a single host, given multiple remote browser clients?

  Read the article

• How can I mitigate DNS Server outages?

  - by Eric Belair

  Let's say I have a root domain of "mysite.com". That domain and its sub-domains have DNS served by an external service - let's call them Setwork Nolutions. If this external company is hit with a DDoS attack, my interally-hosted websites under this domain are no longer accessible at "mysite.com" or "*.mysite.com", even though the website(s) is/are fully up and operational. How can I mitigate such a problem so as to keep end users happy? The only solution others at my company have come up with is to create a second domain - i.e. "mysite2.com", and host its DNS at another company, and then communicate to all end users that this is the website they should use. I think this is ridiculous, and just leads to a bunch of other problems. I'd like to find a solution where we can point to the same website with the same URL without the original DNS host being operational. Any thoughts?

  Read the article

• IBM Bladecentre H Bootup Sequence Control

  - by Spence

  I have a bladecentre with blades, network and a SAN in a single rack. What I'd like to do is control the startup of the bladecentre so that when the rack is powered on that the blades will delay their bootup until the SAN is powered on correctly. Is this even possible? We have an AMM in the chassis if that helps. Basically we are looking into the reboot that occurs after power is restored to a UPS. I sincerely apologise for the noobness of this question, but I am a software guy trying to help :)

  Read the article

• Outlook Search Folder - Unread Mail in shared mailbox

  - by Garrett

  I have a user who is trying to configure the Unread Mail search folder for a shared mailbox in Outlook 2007. I believe last time we accomplished this by doing an advanced find, and saving the search. However, on this computer I can't search more than one folder of the shared mailbox at a time. Everything I have read online says this isn't possible, but we have one user who has it set up and working perfectly. There's no additional software or indexing, not even Windows Desktop Search 4.0 updates installed.

  Read the article

• DB2 users and groups

  - by Arun Srini

  Just want to know everyone's experience and take on managing users/authentication on a multi-node db2 cluster with users groups. I have 17 apps in production (project based company, only 2 online apps), and some 30 users with 7 groups. prodsel - group that has select privilege on all tables produpdt - update group on selective tables (as required by the apps) proddel - delete prodins - insert permissions for the group Now what my company does is when an app uses certain user (called app1user), and needs select and insert privilege on a table, they 1. grant select and insert for prodsel, prodins respectively 2. add the user under those two groups... now this creates one to many relationship between user and privileges, and this app1user also gets select on other tables granted for the prodsel group. I know this is wrong. Before I explain, I need to know how this is done elsewhere. Please share your experiences, even if you use other Databases that uses OS level authentication.

  Read the article

• sql and web encoding problem

  - by Marki

  Guys, I've got an encoding problem I believe. I have upgraded from phpBB2 to phpBB3. The old databases were in latin1, the new ones have utf8 encoding. Already during the upgrade process some rows of the DB were only read partly into the new version, because of strange characters as it turned out. When I use PHP's mb_convert_encoding() function to convert those strings to UTF8 they end up e.g. as 0x0093, i.e. they must have been some kind of double quotes. Even after doing this conversion, they still show up as 0x0093 in the browser (the squares with 0093 in them when the browser does not know what to display). Can someone explain the problem here? I'm a little confused and afraid I don't see all the dependencies that need to work to have the correct encodings and the correct display thereof...

  Read the article

• cannot mount remote partition using fstab/fuse

  - by HorusKol

  Using a combination of http://ubuntu-tutorials.com/2007/01/02/mount-remote-directories-securely-with-ssh-ubuntu-6061-610/ and http://www.tuxfiles.org/linuxhelp/fstab.html I figured I could mount the root of another computer to somewhere on my new laptop to make it easier to transfer files and stuff. Now, I can connect through SSH and browser the files through an ad-hoc mount - but I would like to be able to do this automatically, and so had a look at fstab. my new entry in fstab is: remote_comp:/ /var/remote_comp fuse defaults 0 0 but testing with mount -a results in the following error: /bin/sh: remote_comp:/: not found I thought the problem was because I was trying to mount the root of the other computer, but even trying sub-directories result in the same error message.

  Read the article

• Windows 2008 Incoming Connection: Where/How is Server IPv4 address defined

  - by revelate

  We're evaluating a VM hosted externally which runs Windows Server 2008 R2 Web Server Edition and wish to access it via a VPN connection for maintenance and administration. RRAS isn't included in Web Server Edition, but it does have a form of VPN server called "Incoming Connections". This appears to work well and even supports multiple simultaneous connections. As we'll be using this VPN regularly we'd like to know if this is a viable solution or if we'd be better off upgrading to Standard Edition and full-fledged RRAS. In particular we're accessing the VM via the Private IP given by the Incoming Connection (currently 169.254.135.207) so we'd like know: if the server private IP might change every so often? if so is there any way to define it manually? or should we be using the server name rather than the private IP address? if so how can we be sure that it will resolve correctly? Name resolution over the "Incoming Connection" has worked on and off during our tests. Thanks for your help

  Read the article

< Previous Page | 553 554 555 556 557 558 559 560 561 562 563 564  | Next Page >