Search Results

Search found 18866 results on 755 pages for 'dev android'.

Page 559/755 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

  • Wifi Snooping over phone

    - by pulsarjune
    I connect to the wifi acccess-point at work, but recently I suspect that data on my phone is being snooped-out from my phone connected to my office's Wifi network. [Phone Model: Sony Ericsson Xperia Neo V, Android v2.3; Wifi accespoint: Belkin G] How can i check my suspicion? Or What are the ways i could get over them? (obviously i want to stay connected to the wifi n/w) Any thoughts on these points?

    Read the article

  • Is it possible to either abort or interrupt and later continue a lvconvert -m1 operation?

    - by SLi
    I have run the command lvconvert -m1 rootvg/newroot /dev/sdb to convert a linear logical volume to a mirrored one. The operation has not yet finished; I interrupted the command with ctrl-c at around 10% mark, but the operation seems to be running in the background anyway. Is it possible to either 1) Abort the lvconvert operation and revert to the state before it? (This would be my preferred option) 2) To safely interrupt the operation and resume it later?

    Read the article

  • Cannot connect to WEBrick on home network

    - by Chris Stewart
    I'm an Android developer and often my applications require server-side code. I typically use Ruby on Rails for the web app, and during development will run the server on my local machine (Mac OS X) with WEBrick. In the morning when I get to the office, I'll run ifconfig in the console to see what IP my laptop has been given that day. I'll use that IP in my Android app when making requests to the web app in question. This all works fine, when I'm in my office. When I get home, I attempt to do the same thing, find my laptop's IP via ifconfig, set it in my app's config file, but the destination can never be found. To exclude my app from the set of hurdles, I attempt to visit the web server IP (e.g., http://192.168.1.4:3000) from my phone's browser, and it cannot connect. If I try from my laptop, which is running the web server, it works fine. If I try from another machine, on the same network, it also is unable to connect. Given this, I think I've narrowed it down to some kind of configuration in my home network, but I frankly have no idea what the cause could be. I don't have anything special at home, your basic Verizon FiOS router/modem with everything connected via Wi-Fi (Wi-Fi for both phone and laptop at work as well, fyi). I've tried disabling the firewall on my Verizon router, enabling port forwarding, and just about everything else I could do for port 3000, and nothing has changed. Dear Server Fault geniuses, please help a poor developer out. :) Edit: Some follow up items to add. My Mac's firewall is not active, and all incoming requests are allowed. I've also verified on my phone and laptop, that they're on the same network (192.168.1.4 Mac, 192.168.1.9 Phone). I have no idea why this isn't working. Edit 2: I went into System Preferences, enabled Web Sharing, and tried to view the website from my phone and it didn't connect. So it's not WEBrick or related to Rails. The firewall on my machine is off and the firewall on my router is off. Edit 3: Some progress. I set up port forwarding for port 3000 to my laptop, found the external IP, and used that and it connected fine. So, there's definitely something not quite set up correctly on my internal network.

    Read the article

  • RHEL json gem installation requires make?

    - by Salahuddin559
    When I try to install json gem (gem install json), at first it fails to do so, because of some dev package issue. After fixing it, it fails saying that "sh: make: command not found" and "ERROR: Error installing json: ERROR: Failed to build gem native extension.". Why is it failing on make? Notice this is not Mac, this is in RHEL 5 (4 or 5, not sure). Why is it not able to do some "build gem native extension"?

    Read the article

  • Windows XP Professional Version 2002 SP3 restarts when I try to Hibernate

    - by dario_ramos
    I googled this and tried some solutions, but nothing seems to work. In the past, Hibernate worked fine. Someone told me that this can be caused by specific hardware, and I have lots of that, because this is a dev machine which we use to develop modules that interact with lots of different hardware. Moreover, this machine also uses RAID, which might have something to do. Is there any way to troubleshoot this by looking at some log file or using some tool?

    Read the article

  • Basic OpenVPN setup not working

    - by WalterJ89
    I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

    Read the article

  • Hybrid gmail MX + postfix for local accounts

    - by krunk
    Here's the setup: We have a domain, mydomain.com. Everything is on our own server, except general email accounts which are through gmail. Currently gmail is set as the MX record. The server also has various email aliases it needs to support for bug trackers and such. e.g. [email protected] |/path/to/issuetracker.script I'm struggling with a setup that allows the following, both locally and from user's email clients. guser1 - has a gmail account and a local account guser2 - only has a gmail account bugs - has a pipe alias in /etc/aliases for issue tracker Scenarios mail to [email protected] from local host (crons and such) needs to go to gmail account mail to [email protected] from local host mail to [email protected] needs to be piped to the local issue tracker script So, the first stab was creating a transport map. In this scenario, the our server would be set as teh MX and guser* destined emails are sent to gmail. Put the gmail users in a map like so: [email protected] smtp:gmailsmtp:25 [email protected] smtp:gmailsmtp:25 Problems: Ignores extensions such as [email protected] Only works if append_at_myorigin = no (if set to yes, gmail refuses to connect with: E4C7E3E09BA3: to=, relay=none, delay=0.05, delays=0.02/0.01/0.02/0, dsn=4.4.1, status=deferred (connect to gmail-smtp-in.l.google.com[209.85.222.57]:25: Connection refused)) since append_at_myorigin is set to no, all received emails have (unknown sender) The second stab was to set explicit localhost aliases in /etc/aliases and do a domain wide forward on mydomain. This too requires setting the local server as the MX: root: root@localhost # transport mydomain.com smtp:gmailsmtp:25 Problems: * If I create a transport map for a domain that matches "$myhostname", the aliases file is never parsed. So when a local user (or daemon) sends an email like: mail -s "testing" root < text.txt Postfix ignores the /etc/alias entry and maps to [email protected] and attempts to send it to the gmail transport mapping. Third stab: Create a subdomain for the bugs, something like bugs.mydomain.com. Set the MX for this domain to local server and leave the MX for mydomain.com to the Gmail server. Problems: * Does not solve the issue with local accounts. So when the bug tracker responds to an email from [email protected], it uses a local transport and the user never receives the email. % postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_at_myorigin = no append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 mydestination = $myhostname, localhost.$myhostname, localhost myhostname = mydomain.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_cert_file = /etc/ssl/certs/kspace.pem smtp_tls_enforce_peername = no smtp_tls_key_file = /etc/ssl/certs/kspace.pem smtp_tls_note_starttls_offer = yes smtp_tls_scert_verifydepth = 5 smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_recipient_restrictions = permit_mynetworks, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_destination smtpd_tls_ask_ccert = yes smtpd_tls_req_ccert = no smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport

    Read the article

  • Window 7 + SVN permission problem

    - by acidzombie24
    In tortoisesvn i get the error Can't create directory 'C:\dev\repo\subfolder\db\transactions\49-1g.txn': ... I used robocopy (i cant remember if i used /copyall) to copy the files onto an external drive then i copied it back after a format. Now ATM i cannot commit. How do i fix this?

    Read the article

  • libtldl not found - chekc libtool installation!

    - by lowgain
    I'm on Fedora 8, trying to configure/make libmp3splt, and every time I try to compile I get libtldl not found - chekc libtool installation! I have libtool installed, and some places online said to try installing libltdl-dev, which does't seem to exist for me to install. Missing anything? Thanks!

    Read the article

  • How to fix grub after moving root partition?

    - by Grzenio
    Hi, Because I am using one of the new WD disks I am trying to aling my root partition with the real sectors, as described here: http://community.wdc.com/t5/Desktop/Problem-with-WD-Advanced-Format-drive-in-LINUX-WD15EARS/m-p/10920#M631 So I copied all files to a temp location, deleted my partition (/dev/sda3), recreated it a few cylinders later (same name) and copied the files to the newly created partition. But now when I try to boot, I get my old grub menu but after selecting my kernel version it hangs... Any idea how I can fix it?

    Read the article

  • Cross-platform restart of Apache

    - by l0b0
    I'd like to have a single command that'll restart Apache on any *nix OS. Currently I'm working with Ubuntu, which has /usr/sbin/apache2ctl /usr/sbin/service no apachectl no httpd and Scientific Linux CERN 5, which has /usr/sbin/apachectl /etc/init.d/httpd no apache2ctl no service I'd like to avoid using a hack like which service 2>/dev/null || which /etc/init.d/httpd

    Read the article

  • http benchmarking?

    - by Sam Williams
    im running varnish-nginx(php-fpm) and im using ab but it keeps messing up. [root@localhost src]# ab -k -n 100000 -c 750 http://192.168.135.12/index.php This is ApacheBench, Version 2.0.40-dev <$Revision: 1.146 $> apache-2.0 Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/ Copyright 2006 The Apache Software Foundation, http://www.apache.org/ Benchmarking 192.168.135.12 (be patient) apr_socket_recv: Connection reset by peer (104) is there anything else i can use? or am i doing it wrong?

    Read the article

  • IIS7 - Basic Authentication Module missing?

    - by FlySwat
    I'd like to use basic HTTP authentication to keep people out of our dev site instance since it is unfortantly exposed to the wild internet. However, in IIS7, the only authentication modes listed are Forms, Anonymous and Impersonation. Where did the "Basic Authentication" module go, and how can I get it back?

    Read the article

  • Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

    - by Abner
    Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

    Read the article

  • What is the garbage text that is being printed by wvdial in terminal?

    - by Hrishi
    When I dial using wvdial, sometimes it prints some garbage text into the terminal. This is not happening every time, but in the garbage text I can see some readable strings which is often irc logs(from xchat) or GET requests from the browser. One of my friend told me that this is probably something it's reading from /dev/random for Random entropy, but I couldn't find any supporting information. What is this text, and why is it being printed to the terminal? See the below picture for an example:

    Read the article

  • Tomato VPN connect but cannot ping LAN IP

    - by David Hamilton
    I've setup TomatoVPN using these settings on the server: TAP UDP 1194 Client address pool 10.10.9.1 -10.10.9.254 LAN clients are configured with 10.10.10.x I can connect from a remote client, but pinging anything in the 10.10.10.x results in a "Destination Host Unreachable" error. Here's my client configuration script: remote x.x.x.x 1194 client dev tap0 proto udp resolv-retry infinite nobind persist-key persist-tun float ca ca.crt cert client1.crt key client1.key ns-cert-type server Any suggestions as how I can make this properly bridge the two networks?

    Read the article

  • Nagios shell script cannot be executed

    - by MeinAccount
    I'm trying to monitor GitLab with nagios. I've created the following command definition and shell script but when checking the service I'm receiving the following e-mail. How can I solve this? The file is executable. [...] nagios : 3 incorrect password attempts ; TTY=unknown ; PWD=/ ; USER=git ; COMMAND=/bin/bash -c /var/lib/nagios/custom_plugins/check_gitlab.sh Command definition: define command { command_name custom_check_gitlab command_line /var/lib/nagios/custom_plugins/check_gitlab.sh } Shell script: #! /bin/sh # [...] RAILS_ENV="production" # Script variable names should be lower-case not to conflict with internal /bin/sh variables such as PATH, EDITOR or SHELL. app_root="/home/git/gitlab" app_user="git" unicorn_conf="$app_root/config/unicorn.rb" pid_path="$app_root/tmp/pids" socket_path="$app_root/tmp/sockets" web_server_pid_path="$pid_path/unicorn.pid" sidekiq_pid_path="$pid_path/sidekiq.pid" ### Here ends user configuration ### # Switch to the app_user if it is not he/she who is running the script. if [ "$USER" != "$app_user" ]; then sudo -u "$app_user" -H -i $0 "$@"; exit; fi # Switch to the gitlab path, if it fails exit with an error. if ! cd "$app_root" ; then echo "Failed to cd into $app_root, exiting!"; exit 1 fi ### Init Script functions check_pids(){ if ! mkdir -p "$pid_path"; then echo "Could not create the path $pid_path needed to store the pids." exit 1 fi # If there exists a file which should hold the value of the Unicorn pid: read it. if [ -f "$web_server_pid_path" ]; then wpid=$(cat "$web_server_pid_path") else wpid=0 fi if [ -f "$sidekiq_pid_path" ]; then spid=$(cat "$sidekiq_pid_path") else spid=0 fi } # Checks whether the different parts of the service are already running or not. check_status(){ check_pids # If the web server is running kill -0 $wpid returns true, or rather 0. # Checks of *_status should only check for == 0 or != 0, never anything else. if [ $wpid -ne 0 ]; then kill -0 "$wpid" 2>/dev/null web_status="$?" else web_status="-1" fi if [ $spid -ne 0 ]; then kill -0 "$spid" 2>/dev/null sidekiq_status="$?" else sidekiq_status="-1" fi } check_pids check_status if [ "$web_status" != "0" -a "$sidekiq_status" != "0" ]; then echo "GitLab is not running." exit 2 fi if [ "$web_status" != "0" ]; then printf "The GitLab Unicorn webserver is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$sidekiq_status" != "0" ]; then printf "The GitLab Sidekiq job dispatcher is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$web_status" = "0" -a "$sidekiq_status" = "0" ]; then printf "GitLab and all it's components are \033[32mup and running\033[0m.\n" exit 0 fi

    Read the article

  • VMWare Worksation hardware

    - by Avi
    I'm gonna spec a new computer, used for running VMWare Worksation. The computer will be running a few virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. Any suggestions? Processor, MB, disks etc? (P.S. The only item I AM sure of is that the machine will be using a Xonar Essence Stx, connected to my NAND amplifier ;-)

    Read the article

  • Advice on moving a machine room to a new location?

    - by MikeJ
    Our company is moving to new offices in a couple of months, and I am responsible for looking after the move of the development servers in the company. most of the dev equipment is in 5, 42U cabinets + rack for switching/routing equipment. How do most people do this sort of thing? Move the cabinent whole or extract the indvidual components and move the racks empty. any advise on prep and shutdown before the move would be welcome

    Read the article

  • Use bootable vhd with Virtualbox

    - by user18151
    Hello, I want to create a bootable Windows 7 vhd using the steps mentioned at: http://www.microsoft.com/downloads/details.aspx?FamilyID=80ede31d-3509-407b-a896-0beea8705589&displaylang=en However, I wanted to know if I will be able to access the vhd using Virtualbox too. I intend to install VS2008 in the VM and use it in Virtualbox when doing quick work and on native hardware when doing a lot of work. I don't want to mess up my actual Win7 installation with VS2008 dev work.

    Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >