Search Results

Search found 15698 results on 628 pages for 'keep alive'.

Page 559/628 | < Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >

• Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

  - by user38586

  I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

  Read the article

• File/folder permissions and groups on Linux with Apache

  - by phobia

  I'm trying to learn about permissions on linux webserver with apache. Some clues to the system: The server I have to play around with is Fedora based. Apache runs as apache:apache. To allow for e.g. php to write to a file the file needs to be chmod 777. 755 is not sufficiant. What I'm wondering is basically how set up permissions like they should be on e.g. a "shared web host". My main problem is that if I set a permission so that one user cannot access anothers home folder, then apache can't read from the public_html folder either. To keep the users out I need to set chmod 700. But to let apache to read I need to have at least execute on world, so a 701 basically works, but won't let some users in. So I'm really stuck on what to do. Have been concidering adding the apache user to the frous grours below to avoid having to add the world execute flag, but is that a bad thing? Should it be the other way around, the users in the groups below should also be in the apache group? I was aiming at having 4 groups: 1. webapp same as dev_int, but is the only one that can go inside the webapp/live folder to e.g. do an update from the repo. 2. dev_int can read,write and execute everything in the "web root", including the two below, but nothing outside of the web root 3. dev_ext can read write and execute in all client folders, but cannot access anything outside of the webapp root 4. clientsBasic ftp accounts. Has a home folder with a public_html, but cannot access any other home folders An example of folder structure: webroot    no users in the aforementioned groups can go outside of here some_project    :dev_int only webapp live    :webapp only staging    :dev_int and :dev_ext clients    :dev_int and :dev_ext client_1    :dev_int, :dev_ext and client1:clients public_html dev developer_1    developer_1:dev_int OR :dev_ext public_html

  Read the article

• How to bind old user's SID to new user to remain NTFS file ownership and permissions after freshly reinstall of Windows?

  - by LiuYan ??

  Each time we reinstalled Windows, it will create a new SID for user even the username is as same as before. // example (not real SID format, just show the problem) user SID -------------------- liuyan S-old-501 // old SID before reinstall liuyan S-new-501 // new SID after reinstall The annoying problem after reinstall is NTFS file owership and permissions on hard drive disk are still associated with old user's SID. I want to keep the ownership and permission setting of NTFS files, then want to let the new user take the old user's SID, so that I can access files as before without permission problem. The cacls command line tool can't be used in such situation, because the file does belongs to new user, so it will failed with Access is denied error. and it can't change ownership. Even if I can change the owership via SubInACL tool, cacls can't remove the old user's permission because the old user does not exist on new installation, and can't copy the old user's permission to new user. So, can we simply bind old user's SID to new user on the freshly installed Windows ? Sample test batch @echo off REM Additional tools used in this script REM PsGetSid http://technet.microsoft.com/en-us/sysinternals/bb897417 REM SubInACL http://www.microsoft.com/en-us/download/details.aspx?id=23510 REM REM make sure these tools are added into PATH set account=MyUserAccount set password=long-password set dir=test set file=test.txt echo Creating user [%account%] with password [%password%]... pause net user %account% %password% /add psgetsid %account% echo Done ! echo Making directory [%dir%] ... pause mkdir %dir% dir %dir%* /q echo Done ! echo Changing permissions of directory [%dir%]: only [%account%] and [%UserDomain%\%UserName%] has full access permission... pause cacls %dir% /G %account%:F cacls %dir% /E /G %UserDomain%\%UserName%:F dir %dir%* /q cacls %dir% echo Done ! echo Changing ownership of directory [%dir%] to [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q echo Done ! echo RunAs [%account%] user to write a file [%file%] in directory [%dir%]... pause runas /noprofile /env /user:%account% "cmd /k echo some text %DATE% %TIME% > %dir%\%file%" dir %dir% /q echo Done ! echo Deleting and Recreating user [%account%] (reinstall simulation) ... pause net user %account% /delete net user %account% %password% /add psgetsid %account% echo Done ! %account% is recreated, it has a new SID now echo Now, use this "same" account [%account%] to access [%dir%], it will failed with "Access is denied" pause runas /noprofile /env /user:%account% "cmd /k cacls %dir%" REM runas /noprofile /env /user:%account% "cmd /k type %dir%\%file%" echo Done ! echo Changing ownership of directory [%dir%] to NEW [%account%]... pause subinacl /file %dir% /setowner=%account% dir %dir%* /q cacls %dir% echo Done ! As you can see, "Account Domain not found" is actually the OLD [%account%] user echo Deleting user [%account%] ... pause net user %account% /delete echo Done ! echo Deleting directory [%dir%]... pause rmdir %dir% /s /q echo Done !

  Read the article

• Windows 7 The boot selection failed because a required device is inaccessible 0xc000000f

  - by piratejackus

  I have a problem with my Windows 7, hardware : Acer 3820TG Operating Systems : Windows 7 and Ubuntu 10.04 dual Case: When I try to boot my windows 7 I see an error: "Window failed to start. A recent hardware or software change might be the cause. To fix the problem: 1.Insert.... 2. .... ... status : 0xc000000f info : The boot selection failed because a required device is inaccessible .... " I can't exactly remember what were my last actions on Windows. I already searched this error and applied the proposed solutions, I created a repair USB (because I don't have a CD-ROM nor a Windows 7 CD) such as; -repair operating system :it says it cannot repair it -checking disk (chkdsk D: /f /r) : it checks the disk without a problem or error and it takes pretty long (more than a hour). But when I restart, still the same error. -I didn't create a restore point so I pass this option -I don't have a system image -I tried to run windows recovery (I have a recovery partition) but there are just two options: 1- Format the operating system but retain user data (copies the files under users to c\backup folder, but when I searched deeper I found that there are some people who already tried this option and couldn't find their user files under backup directory). Plus, I have unfortunately just one partition D (it is a fault I know) because I use always Ubuntu. So this is not applicable in my situation 2- Format entire system (Windows). I keep my valuable data in windows but not in user folder. I was reaching them from Windows. -I tried to repair windows boot by: bootrec /fixMBR bootrec /fixBoot bootrec /rebuildBCD I lost all grub menu, and reinstalled it. - ubuntuforums.org/showthread.php?t=1014708&page=29 nothing changed, same error. I created a thread in microsoft forums - http://social.answers.microsoft.com/Forums/en-US/w7install/thread/69517faf-850a-45fd- 8195-6d4ed831f805 but I couldn't find a solution. Before I run chkdsk from usb repair disk I couldn't able to mount Windows (NTFS) partition from Ubuntu, I was getting "couldn't mount file system, error code 2". I tried to fix ntfs partition from ubuntu and got "segmentation fault". I also created a thread on ubuntuforums for this mount problem: - http://ubuntuforums.org/showthread.php?t=1606427 So, after chkdsk, I could enable to mount windows partition but all I see in this partition is chkdsk logs, no any other data. Now, I don't think I lost my data because I don't get any filesystem errors, just the boot section, but this log files under windows partition makes me afraid. I see that Microsoft developers don't have a solution yet for this error. If you need any information to get more idea I can give, maybe I miss some points or it could be complicated. Thanks in advance.

  Read the article

• Why are certain default application associations "locked"?

  - by H.B.

  Edit: As i now have three answers that do not answer the question: This question is not about getting the association to work again. I do not like fighting symptoms, i prefer cures. After associating my MP3 files with MPlayer using the Open with/Choose default program... dialogue i can no longer change that association using said dialogue, the Always use this [...] Checkbox is henceforth always greyed out (Control Panel > Default Programs > Associate a file type or protocol with a program does not let me change it either, it seems to just use the same dialogue anyway). That also happened for MP4s but not for MKVs for example, and if i associate my MP3s with other applications like VLC it does not get blocked. I would really like to know why that is and if i can avoid this beforehand (thankfully i know ways to fix it afterwards already). Edit: Another obervation: The blocking programs (i managed to block it with an association to Visual Studio as well) do not appear in the Recommended Programs of the open-with-dialogue (And the explorer said: "The current program is not recommended, but i won't let you change it, ha!"). Edit: A screenshot as requested: As you can see on the top left (if you know the icon of MPlayer), the file is currently associated with MPlayer. Edit: Ways to fix it (Note: This question is not about fixing it) Using the Default Programs Control Panel > Default Programs > Set Default Programs, select WMP, Choose defaults for this program, check .mp3 This should reassociate the files with WMP and you can create a new association in the explorer. Using the registry (As always, keep your hands off it unless you know what you are doing or if you are fine with accidentally breaking your system) HKEY_CURRENT_USER > Software > Microsoft > Windows > CurrentVersion > Explorer > FileExts > .mp3 Here you could for example clean up the open-with-list, and the current default program seems to be saved here as well in the key UserChoice, there you can change the ProgId string to another application, you can associate it with WMP by entering WMP11.AssocFile.MP3 or just pick another application right away. You may need to mess with permissions on the key though, if you cannot change the ProgId value.

  Read the article

• Exchange 2007 Standard Edition

  - by Phrontiste

  We Have : Exchange 2007 Standard Edition IBM System X3650 2 x Intel Xeon 5430 2.66 GHz Version 8.1 Build 240.6 Mailbox, Hub Transport, Client Access Role Installed on One Box Total Number of Mailboxes : 110 - 130 6 Physical Disks Disk 0,1 (68 GB) = Raid-1, OS Partition ( C: Partition) Disk 2,3 (279GB) = Raid-1, Exchange Database (First and Second Storage Groups) ( D: Partition ) Disk 4,5 (68 GB) = Raid-1, Exchange Transaction Logs ( E: Partition ) Setup: Storage Groups : D:\First Storage group\Mailbox database.edb Storage Groups : D:\Second Storage Group\Public Folder Database.edb Transaction Logs : E Partition Problem 1: On our D Partition (Mailbox Database Partition), total size is 279 GB, free space remaining is 64.7 GB, when I select the first storage group and second storage group folders and right click properties they report a size of 165 GB. Mailbox database reports a size of 157GB when right clicked Properties. where as the size displayed in the folder is 164,893,456 KB So, we are missing around 50-54 GB, there is nothing else on these drives, no page file, nothing at all. The partition housing the Transaction logs is reporting the sizes accurately. Any suggestions / fixes on the above ? Problem 2: As you may have already read in Problem 1, the size of the mailbox database is 157GB or 164GB reported; which is not recommended, a) What would you suggest we should do to divide mailboxes in storage groups on this same server ? b) How would we move mailboxes into different storage groups ? c) This is the information store size ? (Am I right in thinking that this is not recommended) d) Having multiple storage groups with one Mailbox DB in each, would that reduce the size of the Information Store? e) Any suggestions / how-to reduce the size of information store ? We didn't install this, we have inherited this - what other recommendations you can make in order to keep ourselves better prepared for any server disaster? We are backing up with Yosemite Backup on RD1000 (320GB) at the moment, which is backing up successfully, flushing the logs daily. We haven't done a test restore YET. I have tried to provide as much info as possible, please let me know if you need further info. Also, we haven't yet faced any problems in mailflow, access speeds, everything is working fine, we have two to five people accessing OWA or Outlook via vpn only. Thanks for your time to read the above - will look forward to your expert suggestions.

  Read the article

• Microsoft signed drivers appears as publisher not verfied

  - by Priyanka Gupta

  Task at hand: Microsoft sign drivers on Win 7. I microsoft signed my driver package 3 times every time thinking I might have missed a step or something. However, I cannot seem to get rid of the Windows Security error message "Windows can't verify the publisher of this driver software'. This is not the first time I have signed the driver packages. I was successfully able to sign other driver packages a few months ago. However, with this driver package I keep getting Windows security dialog box. Here's the procedure I follow - Create a new cat file using INF2CAT tool. Self sign the driver using a Versign Class 3 Public Primary Certification Authority - G5.cer. Run the microsoft tests on DTM Servers and clients with the devices that use this driver. Create WLK submission package. Self sign the cab file. Submit the package for certification. The catalog file that comes back after successfully passing tests says Name of signer "Microsoft Windows Hardware Comptibility Publisher". When I check the validity of signature using SignTool, it says the signature is vaild. However, when I try to install the driver with new signed catalog file the windows complain. Any ideas? Edit 11/12/2012: Reply to Eugene's comment Thanks for the help, Eugene. Yes. I did sign two other driver packages before. One of them was modified version of WinUSB driver. I am using the same certificate I used when I signed those two driver packages a few months ago. It costs $250 per signing from Microsoft. I would think that Microsoft would complain about it during certification if the certificate is wrong. I use the following command to self sign the CAT file. I don't have to specify the ceritificate name as there's only one certificate in the directory - Signtool sign /v /a /n CompanyName /t http://timestamp.verisign.com/scripts/timestamp.dll OurCatalogFile.cat Below is the result from running Verify command on the Microsoft signed OutCatalogFile.cat C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\x64signtool verify /v "C:\User s\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Verifying: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Hash of file (sha1): BDDF39B1DD95881B462164129758A7FFD54F47D9 Signing Certificate Chain: Issued to: Microsoft Root Certificate Authority Issued by: Microsoft Root Certificate Authority Expires: Sun May 09 18:28:13 2021 SHA1 hash: CDD4EEAE6000AC7F40C3802C171E30148030C072 Issued to: Microsoft Windows Hardware Compatibility PCA Issued by: Microsoft Root Certificate Authority Expires: Thu Jun 04 16:15:46 2020 SHA1 hash: 8D42419D8B21E5CF9C3204D0060B19312B96EB78 Issued to: Microsoft Windows Hardware Compatibility Publisher Issued by: Microsoft Windows Hardware Compatibility PCA Expires: Wed Sep 18 18:20:55 2013 SHA1 hash: D94345C032D23404231DD3902F22AB1C2100341E The signature is timestamped: Tue Nov 06 11:26:48 2012 Timestamp Verified by: Issued to: Microsoft Root Authority Issued by: Microsoft Root Authority Expires: Thu Dec 31 02:00:00 2020 SHA1 hash: A43489159A520F0D93D032CCAF37E7FE20A8B419 Issued to: Microsoft Timestamping PCA Issued by: Microsoft Root Authority Expires: Sun Sep 15 02:00:00 2019 SHA1 hash: 3EA99A60058275E0ED83B892A909449F8C33B245 Issued to: Microsoft Time-Stamp Service Issued by: Microsoft Timestamping PCA Expires: Tue Apr 09 16:53:56 2013 SHA1 hash: 1895C2C907E0D7E5C0292B92C6EA8D0E236F525E Successfully verified: C:\Users\logotest\Documents\serialdriversigning\OurCatalogFile.cat" Number of files successfully Verified: 1 Number of warnings: 0 Number of errors: 0 Thank you!

  Read the article

• nginx connection time issue on some IPs

  - by sheldon

  I have recently shifted my server to nginx and php-fpm getting rid of apache. This has helped improves speeds of my website. Everything seems to work fine until i came across this issue, i noticed that nginx keeps throwing connection time out errors for only certain IPs. One of the IPs is my office IP, we have a backend that is accessed from our office through out the day. I use supervisord to launch 3 php-fpm processes with workers this is my typical php-fpm config pm.max_children = 50 pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 pm.max_requests = 300 Since i have a server with 4 cores and 2 GB ram this is my nginx setup worker_processes 4; worker_rlimit_nofile 8192; events { worker_connections 1024; use epoll; multi_accept off; } sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 55; recursive_error_pages on; server_name_in_redirect off; server_tokens off; client_header_timeout 3m; client_body_timeout 3m; send_timeout 3m; connection_pool_size 256; client_header_buffer_size 8k; large_client_header_buffers 4 32k; request_pool_size 4k; output_buffers 4 32k; postpone_output 1460; proxy_buffer_size 32k; proxy_buffers 4 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; fastcgi_connect_timeout 120; fastcgi_send_timeout 120; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_ignore_client_abort off; Where am i going wrong with the config, I have tried various settings but the issue still persists. These are the errors i keep getting 2011/11/13 18:20:33 [error] 21583#0: *311683 upstream timed out (110: Connection timed out) while reading response header from upstream, client: IP, server: tastykhana.in, request: "GET url HTTP/1.1", upstream: "fastcgi://unix:/var/run/php-fpm.socket:", host: "tastykhana.in", referrer: "url"

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Wake On Lan only works on first boot, not sequent ones

  - by sp3ctum

  I have converted my old Dell Latitude D410 laptop to a server for tinkering. It is running an updated Debian Squeeze (6) with a Xen enabled kernel (I want to toy with virtual machines later on). I am running it 'headless' via an ethernet connection. I am struggling to enable Wake On Lan for the box. I have enabled the setting in the BIOS, and it works nicely, but only for the first time after the power cord is plugged in. Here is my test: Plug in power cord, don't boot yet Send magic Wake On Lan packet from test machine (Ubuntu) using the wakeonlan program Server expected to start (does every time) Once server has booted, log in via ssh and shut it down via the operating system After shutdown, wake server up via WOL again (fails every time) Some observations: Right after step 1 I can see the integrated NIC has a light on. I deduce this means the NIC gets adequate power and that the ethernet cable is connected to my switch. This light is not on after step 4 (the shutdown stage). The light becomes back on after I disconnect and reconnect the power cord, after which WOL works as well. After step 4 I can verify that wake on lan is enabled via the ethtool program (repeatable each time) This blog post suggested the problem may lay in the fact the motherboard might not be giving adequate power to the NIC after shutdown, so I copied an acpitool script that supposedly should signal the system to give the needed power to the card when shut down. Obviously it did not fix my issue. I have included the relevant power settings in the paste below. I have tried different combinations of parameters of shutdown (the program) options, as well as the poweroff program. I even tried "telinit 0", which I figured would do the most direct boot via software. If I keep the laptop's power button pressed down and do a hard boot this way, the light on the ethernet port stays lit and a WOL is possible. I copied a bunch of hopefully useful information in this paste I have tried this with the laptop battery connected and without it. I get the same result. Promptly pressing the power button causes the system to shut down with the message "The system is going down for system halt NOW!", and WOL is still unsuccessful.

  Read the article

• XP Pro product keys

  - by Bill

  I have a very serious problem. After my XP Home OS was trashed by rogue software - a trial of a thing named TuneUp - I did a clean install, including HDD reformat of Windows XP Pro from a purchased OEM disk. This was Service Pack 2, subsequently upgraded to SP3. I had conclusively mislaid the product key. I had to access data on the machine VERY urgently and I did not then know that under some circumstances Microsoft might agree to provide a replacement. I found what I now know must have been a pirate key on the Net which enabled installation but NOT activation. This of course left me functional but 30 days before meltdown - about 20 days left as I write this. Various retailers want around £100 for retail with matching product key. - this would be paying twice over just to continue use on the same computer. I have neither need nor intention of installing XP Pro on any other computer. I have tried a number of applications claiming to deal with this problem but none of them work. A Belarc profile shows that the pirate key has replaced the original one on the system. I have now found two keys, one of which might be the original, but neither work. I am about to upgrade the HDD and it looks like I will just be passing the problem on when I install XP. I have retrieved a key from the disk, but it is seemingly one Microsoft use in production and does not work. It is 76487-OEM-0015242-71798. The keys I have, one of which which might or might not be the original, are CD87T-HFP4G-V7X7H-8VY68-W7D7M and FC8GV-8Y7G7-XKD7P-Y47XF-P829W (or P819W - I believe it to be the latter, but the box will not accept it). The pirate key which has enabled this install and which is now stored on the system but will not activate is QQHHK-T4DKG-74KG7-BQB9G-W47KG. In these circumstances is it likely that Microsoft would issue a replacement? Is there any other solution? I am not trying to defraud anyone, just to keep on using the product I legitimately bought. Bill

  Read the article

• How could I let Skydrive desktop sync to MicroSD in Windows 8 tablet?

  - by peSHIr

  I have a Samsung Slate 7 tablet with (now) Windows 8 on it. This machine has a 64 Gb SSD and I have a 64 Gb MicroSD card in it. I also have a Skydrive on my main Microsoft ID that contains about 45 Gb of content. With Windows and some development stuff installed, my Skydrive will not fit on the main drive of the tablet. (Besides, my idea was to keep data on the memory card anyway, to make it easier to repave the machine without data loss if need be.) My problem should now be clear: I want to install the Skydrive desktop app to sync my Skydrive to the MicroSD card. This is not possible, as Skydrive does not allow syncing files to removable drives. I have tried a number of things already, but none of them worked: Use the mklink command line tool to create a directory link/junction from a folder name on SSD to a folder on the MicroSD and then try to install Skydrive sync to the SSD link folder. Skydrive however still recognizes this as something it does not want to sync onto. The various different filter drivers mentioned on Agnipulse (including the Hitachi one) that should make windows see some or all of the removable drives in the system as fixed drives do not seem work on (64-bit) Windows 8: they either can't be installed, do nothing and/or cause Windows 8 to go into Automatic Repair mode when rebooting. The Lexar BootIt app seems to be meant to flip the relevant bit in the on-board drive controller of supported USB pen drives, but I tried it anyway. Of course it did nothing to how the MicroSD card was seen. I have now run out of ideas, it seems, and I was wondering if anyone here has a solution to let Windows 8 see the MicroSD memory card in my tablet as a fixed drive instead of removable drive, or some other way of getting the Skydrive desktop to sync my Skydrive data to that MicroSD card. And to be complete: this is not a duplicate question of this or this as those ask about getting USB drives multiple partitions to work on Windows XP. This question is specific about getting desktop Skydrive to sync to MicroSD card in Windows 8, which seems to be a question I have not seen on superuser so far.

  Read the article

• Problems migrating an EBS backed instance over AWS Regions

  - by gshankar

  Note: I asked this question on the EC2 forums too but haven't received any love there. Hopefully the ServerFault community will be more awesome. The new AWS Sydney region opening up is something that we've been waiting for for a long time but I'm having a lot of trouble migrating our instances over from N. California. I managed to migrate 1 instance over using CloudyScripts to move a snapshot and then firing up a new instance in the Sydney region. This was a very new instance so both the source and destination were running on a Ubuntu 12.04 LTS server and I had no issues there. However, the rest of our instances are all Ubuntu 10.04 LTS and with these, I'm having a lot of problems. I've tried following: 1- following the AWS whitepaper on moving instances which was given to us at the recent Customer Appreciation Day in Sydney where the new region was launched. The problem with this approach was with the last step (Step 19) here you register the image: ec2-register -s snap-0f62ec3f -n "Wombat" -d "migrated Wombat" --region ap-southeast-2 -a x86_64 --kernel aki-937e2ed6 --block-device-mapping "/dev/sdk=ephemeral0" I keep getting this error: Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' does not exist which I think is due to the kernel_id not existing in the Sydney region? 2- Using CloudyScripts to move a snapshot and then creating a new volume and attaching to a new instance in Sydney This results in the instance just hanging on boot and failing the status checks. I can't SSH in or look at the server log I suspect that my issue is with finding the right kernel_id for the volume in the new region. However I can't seem to work out how to go about finding this kernel_id, the ones I've tried (from the original instance) don't result in the Client.InvalidAMIID.NotFound: The AMI ID 'ami-937e2ed6' error and any other kernel_id just won't boot. I've tried both 12.04 and 10.04 versions of Ubuntu. Nothing seems to work, I've been banging my head against a wall for a while now, please help! New (broken) instance i-a1acda9b ami-9b8611a1 aki-31990e0b Source instance i-08a6664e ami-b37e2ef6 aki-937e2ed6 p.s. I also tried following this guide on updating my Ubuntu LTS version to 12.04 before doing the migration but it didn't seem to work either, still getting stuck on updating the kernel_id http://ubuntu-smoser.blogspot.com.au/2010/04/upgrading-ebs-instance.html

  Read the article

• Compiling PHP with GD crashes with EXC_BREAKPOINT (SIGTRAP) on PPC Mac

  - by Ömer

  First of all, I should say that I have searched the whole Internet for this problem but I couldn't find any solution yet. I have a Mac mini PowerPC (PPC) and I run Apache webserver (httpd-2.2.22) with PHP (5.4.0) and I do all the configure & compilation jobs by myself. If configure with: './configure' '--prefix=/usr/local/php5' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--sysconfdir=/etc' '--with-config-file-path=/etc' '--with-zlib' '--with-zlib-dir=/usr' '--with-openssl=/usr' '--without-iconv' '--enable-exif' '--enable-ftp' '--enable-mbstring' '--enable-mbregex' '--enable-sockets' '--with-mysql=/usr/local/mysql' '--with-pdo-mysql=/usr/local/mysql' '--with-mysqli=/usr/local/mysql/bin/mysql_config' '--with-apxs2=/usr/local/apache2/bin/apxs' '--with-mcrypt' then the PHP works flawlessly. But if I add the GD module by adding these to the script above: '--with-gd' '--with-jpeg-dir=/usr/local/lib' '--with-freetype-dir=/usr/X11R6' '--with-png-dir=/usr/X11R6' '--with-xpm-dir=/usr/X11R6' the PHP gets configured and compiled without any errors but it causes EXC_BREAKPOINT (SIGTRAP) (see the Crash Reporter log below) when I request a page which calls PHP module. It's obvious that something related to the GD module is causing this, probably FreeType module because it's present in the log but it may not be definite of course. When the PHP crashes (or more accurately, httpd) the CPU goes 100% for 10 to 15 seconds until it recovers. I need to use the GD module and keep the Mac mini PowerPC. So, what should I do to solve this problem? Process: httpd [79852] Path: /usr/local/apache2/bin/httpd Identifier: httpd Version: ??? (???) Code Type: PPC (Native) Parent Process: httpd [79846] Date/Time: 2013-11-04 15:44:28.444 +0200 OS Version: Mac OS X 10.5.8 (9L31a) Report Version: 6 Anonymous UUID: 0178B7F8-2241-43F7-A651-9E7234D41A37 Exception Type: EXC_BREAKPOINT (SIGTRAP) Exception Codes: 0x0000000000000001, 0x0000000093c11e0c Crashed Thread: 0 Application Specific Information: *** single-threaded process forked *** Thread 0 Crashed: 0 com.apple.CoreFoundation 0x93c11e0c __CFRunLoopFindMode + 328 1 com.apple.CoreFoundation 0x93c13d88 CFRunLoopAddSource + 276 2 com.apple.DiskArbitration 0x901a6e8c DAApprovalSessionScheduleWithRunLoop + 52 3 ...ple.CoreServices.CarbonCore 0x9512e67c _FSGetDiskArbSession(__DASession**, __DAApprovalSession**) + 540 4 ...ple.CoreServices.CarbonCore 0x9512e420 CreateDiskArbDiskForMountPath(char const*) + 84 5 ...ple.CoreServices.CarbonCore 0x9512d2c8 FSCacheableClient_GetVolumeCachedInfo(char const*, statfs const*, CachedVolumeInfo*, __DADisk*, __DADisk**) + 280 6 ...ple.CoreServices.CarbonCore 0x9512cca4 MountVolume(char const*, statfs*, unsigned char, unsigned char, __DADisk*, short*) + 352 7 ...ple.CoreServices.CarbonCore 0x9512ca48 MountInitialVolumes() + 172 8 ...ple.CoreServices.CarbonCore 0x9512c4d4 INIT_FileManager() + 164 9 ...ple.CoreServices.CarbonCore 0x9512c390 GetRetainedVolFSVCBByVolumeID(unsigned long) + 48 10 ...ple.CoreServices.CarbonCore 0x9512adf4 PathGetObjectInfo(char const*, unsigned long, unsigned long, VolumeInfo**, unsigned long*, unsigned long*, char*, unsigned long*, unsigned char*) + 184 11 ...ple.CoreServices.CarbonCore 0x9512acc4 FSPathMakeRefInternal(unsigned char const*, unsigned long, unsigned long, FSRef*, unsigned char*) + 64 12 libfreetype.6.dylib 0x0070a0fc FT_New_Face_From_Resource + 56 13 libfreetype.6.dylib 0x0070a3b0 FT_New_Face + 48 14 libphp5.so 0x0118d1a8 fontFetch + 824 15 libphp5.so 0x0118edac php_gd_gdCacheGet + 220 16 libphp5.so 0x0118d6d8 php_gd_gdImageStringFTEx + 360 17 libphp5.so 0x011763c0 php_imagettftext_common + 1504 18 libphp5.so 0x01176494 zif_imagefttext + 20 19 libphp5.so 0x014b9c68 zend_do_fcall_common_helper_SPEC + 1048 20 libphp5.so 0x01452898 _ZEND_DO_FCALL_SPEC_CONST_HANDLER + 440 21 libphp5.so 0x014ba878 execute + 776 22 libphp5.so 0x013f190c zend_execute_scripts + 316 23 libphp5.so 0x013779f4 php_execute_script + 596 24 libphp5.so 0x014bbe64 php_handler + 1972 25 httpd 0x000020c0 ap_run_handler + 96 26 httpd 0x00006ae0 ap_invoke_handler + 224 27 httpd 0x000305c4 ap_process_request + 116 28 httpd 0x0002c768 ap_process_http_connection + 104 29 httpd 0x00012d30 ap_run_process_connection + 96 30 httpd 0x00012ecc ap_process_connection + 92 31 httpd 0x000373e4 child_main + 1220 32 httpd 0x000376a8 make_child + 296 33 httpd 0x000377e4 startup_children + 100 34 httpd 0x000387d4 ap_mpm_run + 3988 35 httpd 0x0000a320 main + 3280 36 httpd 0x000019c0 start + 64

  Read the article

• X:\ is not accessible. Insufficient system resources exist to complete the requested service. Help [

  - by Katherine

  I keeping getting the error message from above on multiple computers that I administer. I wasn't sure if I should be posting this on SuperUser or ServerFault so my apologizes if it should go there... Basically, I have at least 5 computers of varying ages (some fresh out of the box!) throwing the above error. X:\ is one of our network drives that is mapped for users. Most of the time if you shut down the biggest application it will fix the problem, but it's becoming an increasing issue, and I can't keep running around fixing it manually. I have tried to do some research, but most of it just states the obvious without supplying a permanent fix. The machines are all running Win XP SP3, with at least 2gb of ram. Sorry for the delay in getting back to people... a lot of good questions. To respond back to people... It is a windows 2003 server that houses the file share. We have about 175 users, however i cannot state how many are actually accessing the information at a single moment. Considering that this is our largest file share, I would say that probably at least 100+. The files we work with are large, but not that big considering that we do a lot of graphical and video work. ~50mb. That being said, this is error occurs simply when trying to gain access to the server itself, not actual files. When I say close a program, I mean that it can be any program. It doesn't matter which program. It varies from machine to machine, and from day to day. Some days it is Firefox, some days it is Outlook, some days it is Excel. There doesn't seem to be a common bond behind which application could be causing the problem. Thank you for the articles, and the recommendation on paging files. I will have to look into that. None of our computers are set to hibernate, so I am going to rule that out.

  Read the article

• Exchange 2010 forwarded emails by external servers being blocked

  - by MadBoy

  Our users were getting spam messages from their own accounts (same domain/login for example [email protected] to [email protected]). This is preety standard trick and I decided to block it so that anonymous users can't send emails as @company.com. This brought some problems on us like our printers not being able to send emails etc but I solved it with secondary smtp receiver on different port with ip restrictions. However it seems to affect forwarding by some e-mail servers as well: Hi. This is the qmail-send program at home.pl. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. : 89.14.1.26 failed after I sent the message. Remote host said: 550 5.7.1 Client does not have permissions to send as this sender --- Below this line is a copy of the message. Return-Path: Return-Path: Received: from mail.company.com [89.14.1.26] (HELO mail.company.com) by company.ho.pl [79.93.31.43] with SMTP (IdeaSmtpServer v0.70) id 488fcb01c2f069d9; Tue, 3 Jan 2012 09:46:55 +0100 Received: from EXCHANGE1.COMPANY ([fe80::d425:135f:b655:1223]) by EXCHANGE2.COMPANY ([fe80::193f:51ac:9316:cb27%14]) with mapi id 14.01.0355.002; Tue, 3 Jan 2012 09:46:55 +0100 From: =?iso-8859-2?Q?MadBoy?= So basically server forwards it without affecting email address it was send with and our servers treat it like spam. I used this command to block things: Get-ReceiveConnector "DEFAULT Exchange2" | Get-ADPermission -user "NT AUTHORITY\Anonymous Logon" | where {$_.ExtendedRights -like "ms-exch-smtp-accept-authoritative-domain-sender"} | Remove-ADPermission Is there anyway I can keep on receiveing things like forwards but be able to block things (except some dedicated antispam solution - this will be added later). Also how do I "reassing" back the permissions that was removed? EDIT to clarify: I have a domain domain.com configured as Authorative. Couple of our users are on project for differentcompany.com which is not on our servers or anywhere close. Now when they send an email from their accounts lets say [email protected] to [email protected] that special alias is configured so that any email it receives it forwards to multiple people including a group alias at our domain [email protected] and that group alias puts the email in users mailboxes. After the email is forwarded by [email protected] and it reaches our server it is denied because the forwarding done by the "external" server doesn't affect user information so for the server it seems like the [email protected] was actually sender and it treats it as spam and denies it. The server at differentcompany.com just adds itself to the header that it passed thru it and doesn't modify sender at anyway (seems like this is how forwarding works). Although I could probably allow this particular server as allowed to relay but this would seem to affect more servers/users as anyone can setup forwarding on their email back to our domain...

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Planning trunk capacity for multiple GbE switches

  - by wuckachucka

  Without measuring throughput (it's at the top of the list; this is just theoretical), I want to know the most standard method for trunking VLANs on multiple Gigabit (GbE) switches to a core Layer 3 GbE switch. Say you have three VLANs: VLAN10 (10.0.0.0/24) Servers: your typical Windows DC/file server, Exchange, and an Accounting/SQL server. VLAN20: (10.0.1.0/24) Sales: needs access to everything on VLAN10; doesn't need access to VLAN30 and vice-versa. VLAN20: (10.0.1.0/24) Support: needs access to everything on VLAN10; doesn't need access to VLAN20 and vice-versa. Here's how I think this should work in my head: Switch #1: Ports 2-20 are assigned to VLAN20; all the Sales workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #1. Switch #2: Ports 2-20 are assigned to VLAN30; all the Support workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #2. Core L3 switch: Ports 2-10 are assigned to VLAN10; all three servers are connected here. With a standard 10/100 x 24 switch, it'll usually come with one or two 1 GbE uplink ports; carrying over this logic to a 10/100/1000 x 24, the "optional" 10 GbE combo ports that most higher-end switches can get shouldn't really be an option. Keep in mind I haven't tested anything yet, I'm primarily moving in this direction for growth (don't want to buy 10/100 switches and have to replace those within a couple of years) and security (being able to control access between VLANs with L3 routing/packet filtering ACLs). Does this sound right? Do I really need the 10 GbE ports? It seems very non-standard and expensive, but it "feels" right when you think about 40 or 50 workstations trunking up to the L3 switch over 1 GbE standard ports. If say 20 workstations want to download a 10 GB image from the servers concurrently, wouldn't the trunk be the bottleneck? At least if the trunk was 10 GbE, you'd have 10x1GbE nodes being able to reach their theoretical max. What about switch stacking? Some of the D-Links I've been looking at have HDMI interfaces for stacking. As far as I know, stacking two switches creates one logical switch, but is this just for management I/O or does the switches use the (assuming it's HDMI 1.3) 10.2 Gbps for carrying data back and forth?

  Read the article

• Starting php-cgi at boot on mac os x 10.6.8

  - by nikhil

  I'm new to mac os, I have installed and configured nginx with php-fastcgi. I need to run this command in a terminal and keep that terminal open to access php files from my browser. php-cgi -b 127.0.0.1:9000 -q Here's the plist that I wrote by looking up sources on the internet <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Debug</key> <false/> <key>EnvironmentVariables</key> <dict> <key>PHP_FCGI_CHILDREN</key> <string>2</string> <key>PHP_FCGI_MAX_REQUESTS</key> <string>1000</string> </dict> <key>RunAtLoad</key> <true/> <key>KeepAlive</key> <true/> <key>UserName</key> <string>nikhil</string> <key>Label</key> <string>php-fastcgi</string> <key>ProgramArguments</key> <array> <string>/usr/bin/php-cgi</string> <string>-b 127.0.0.1:9000</string> <string>-q</string> </array> </dict> </plist> I'm loading it using launchctl load -w ~/Library/LaunchAgents/php-fastcgi.plist without any success, can anyone tell me how this can be done.

  Read the article

• recommendations for efficient offsite remote backup solution of vm's

  - by senorsmile

  I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

  Read the article

• ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

  - by kce

  We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

  Read the article

• APC ups es 700 randomly overload

  - by Matteo Mosca

  First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

  Read the article

• Why my Buffalo router keeps on sending rdp, netbios, ftp, http requests?

  - by user192702

  I have the following network setup: Buffalo Router (192.168.100.1) < Watchguard XTM21 (192.168.100.13) < PC For some reason I keep on seeing the following repeating on my XTM21's Traffic Monitor. While I have enabled Port Forwarding, none of the ports reported below were enabled. Can someone let me know why I'm seeing all of these? 2013-10-19 23:37:56 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4013 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 282700472 win 5840" Traffic 2013-10-19 23:37:59 Deny 192.168.100.1 192.168.100.13 http/tcp 2459 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 296571237 win 5840" Traffic 2013-10-19 23:38:02 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 8000/tcp 3244 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 298709937 win 5840" Traffic 2013-10-19 23:38:05 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 290482691 win 5840" Traffic 2013-10-19 23:38:08 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic 2013-10-19 23:38:32 Deny 192.168.100.1 192.168.100.13 ftp/tcp 4025 21 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 321868558 win 5840" Traffic 2013-10-19 23:38:35 Deny 192.168.100.1 192.168.100.13 http/tcp 2471 80 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 325918731 win 5840" Traffic 2013-10-19 23:38:38 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 8000/tcp 3256 8000 0-External Firebox blocked ports 60 64 (Internal Policy) proc_id="firewall" rc="101" tcp_info="offset 10 S 327854525 win 5840" Traffic 2013-10-19 23:38:41 Deny 192.168.100.1 192.168.100.13 rdp/tcp 3896 3389 0-External Firebox Denied 60 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" tcp_info="offset 10 S 327101423 win 5840" Traffic 2013-10-19 23:38:44 Deny 192.168.100.1 192.168.100.13 netbios-ns/udp 2110 137 0-External Firebox Denied 78 64 (Unhandled External Packet-00) proc_id="firewall" rc="101" Traffic

  Read the article

• A dusty server room

  - by pauska

  Here's the story.. The owners of the building we lease office space from decided to do a renovation of the exterior. This involved in some pretty heavy work at the level where our server room is, including exchanging windows wich are fit inside a concrete wall. My red alert went off when I heard that they were going to do the same thing with our server room (yes, our server room has a window. We're a small shop with 3 racks. The window is secured with steel bars.) I explicity told the contractor that they need to put up a temporarily wall between our racks and the original wall - and to make sure that the temporary wall is 100 % air and water-tight. They promised to do so. The temporary wall has a small door in it, so that workers can go in/out through the day (through our server room, wich was the only option....). On several occasions I could find the small door half-way shut while working evenings/nights. I locked the door, and thought that they would hopefully get the point soon and keep the door shut. I even gave a electrician a mouthful when I saw that he didn't close the door properly. By this point - I bet that most of you get a picture of what happened. Yes, they probably left the door open while drilling in the concrete. I present you our 4 weeks old EMC VNX: I'll even put in a little bonus, here is the APC UPS one rack further away from the temporary wall. See the nice little landing strip from my finger? What should I do? The only thing that comes to mind is to either call all our suppliers (EMC, HP, Dell, Cisco) and get them to send technicians to check out all the gear in the server room, or get some kind of certified 3rd-party consulant to check all of it. Would you run production systems on this gear? How long? Edit: I should also note that our aircondition isn't exactly enterprise-grade, given the nature of our small room. It's just a single inverter, wich have failed one time before I started working here (failed inverters usually leads to water dripping out).

  Read the article

• Changing Physical Path gives blank homepage

  - by Julie

  I have two websites ASP Classic - www.company.com and www.companytesting.com. At this time of year, company.com is pointed to a folder called website2012 and companytesting.com is pointing to a folder called website2013. The contents of those two folders are almost identical, just minor changes for our season change (which I was supposed to do today - lol). Up until a couple of weeks ago, I was running Windows Server 2003. To update the "live" website, I'd make a copy of the test site folder, and rename it website2013R1, and point the test site there, then point the live site at website2012. We now have Windows Server 2008 R2 64. (I had someone migrate the websites to the new server for me.) The companytesting.com site, when I pointed it to website2013R1, worked fine. The company.com site, when I pointed it to website2013 (which worked just before, for the companytesting.com site) gives an empty page. (i.e. view source = nothing there.) There is nothing in the failed request log when this happens. I can use the Explore button/link (upper right) in IIS7.5 and see all of the files there. If I use the browse button (either in general or on the index.asp page) I get the blank page again. One weirdness about how these are set up is that companytesting.com uses a login (which I think is windows authentication - it's simply a single username and password for staff, and to keep the GoogleBots out of it). Obviously, company.com does not. But redirecting the to website2013r1 kept the login in place. (So I'm not absolutely clear whether that's attached to the folder or to the site. Hitting the company.com site after changing the path did not yield a password request.) The permissions on the folders all seem to be the same, but obviously, I'm missing something. Why isn't changing the physical path working? As is probably obvious, I'm not knowledgeable about servers. I did OK in 2003, but since it's not my main task and I'm buried right now, I have barely looked at 2008. So I may have really stupid questions when you ask me to check something.

  Read the article

< Previous Page | 555 556 557 558 559 560 561 562 563 564 565 566  | Next Page >