Search Results

Search found 4057 results on 163 pages for 'welcome'.

Page 56/163 | < Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >

• Internal SATA hard disk shows up as removable device on Windows 7

  - by neutron80k

  I am running Windows 7 on an Acer Aspire M7720 with three internal SATA drives; drive #2 and #3 are on a removable HDD rack. Drive #3 (on the second removable HDD rack) shows up as removable device in the system tray. If I take drive #3 and put it in the first rack, it shows up as an internal drive. If I put any other drive in the second removable rack, that drive is also shown as removable device. I would like to fix that so that the drive in the second removable rack also is listed as internal drive. Since this seems to be independent of the actual drive in the rack, I checked the BIOS, but that third SATA port uses the same configuration as the second rack. So far, I could not find a solution for this problem (it's really more an annoyance than a problem), any ideas are welcome.

  Read the article

• I found two usb sticks on the ground. Now what ?

  - by Stefano Borini

  As from subject. I want to see what's inside. I am seriously interested in finding the owner if possible and returning them, but I am worried it could be an attempt at social engineering. I own a macbook intel with OSX 10.6. It is a very important install. What would you do in my situation if you want to see the content without risks ? Any proposal welcome. Edit: I decided not to plug them in, and I brought them to the hotel reception. They will forward it to the police.

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• Snow Leopard Windows 7 File sharing issue

  - by nsiggel

  Hello, wondering if anyone might have any suggestions on how to fix this issue in file sharing between Snow Leopard and Windows 7. On my home network, I have a system running windows 7 which acts as a file server: \WINDOWS7-A\SHARE I also have an IMac which can access the file share most of the time.... however now comes the problem, as soon as I introduce my Windows 7 Laptop and copy files over from it onto the file server (\Windows7-A), the file server become no longer accessible from the Snow Leopard machine... I assume this somehow has to do with elevated security on the network share having been negotiated between the 2 Windows 7 machines which is no longer allowing the Mac to see the Windows machines... but not sure how to disable this, as the only way I can restore communication between the mac and the Windows 7 machine is to restart it... less than ideal... Any suggestions would be welcome.

  Read the article

• How to display downloaded youtube annotations ( not captions) on offline video player?

  - by kowalsk

  i need to display the annotations for some of my downloaded youtube videos. It's also important to make them closeable. Making them clickable would also be nice. What i found out so far: From what i understand there there is a vlc plugin/extension that could also render the annotations but i'm having a hard time finding it. Mplayer might also be an option but i'd have to convert the xml files to .bmp and then use a bmov filter to play them. Any suggestions welcome. Edit: to further clarify i would like to display/overlay annotations from a youtube xml file (i'm willing to go through a conversion step if i have to) pretty much the same way i can display subtitles from a srt or sub file. Edit2: I'm open to using other players too ( if vlc is not a feasible option for what i want)

  Read the article

• find directories in the current directory, older than 5 days and archive them

  - by user197284

  This is basic questions. I need to find folders in the current working directory(not recursively) and if they are older than 5 days archive them. zip or tar.gz is fine. I can find the folders with following commands find ./ -maxdepth 1 -type d -mtime +5 And i know i can pass this output of the find using xargs. But i do not know how to archive with folder name intact. That is the directory test1 should be archived to test1.zip and directory "test2" should be archived to "test2.zip". Any inputs are welcome. Regards

  Read the article

• Analyse frequencies of date ranges in Google Drive

  - by wnstnsmth

  I have a Google Drive spreadsheet where I would like to compute occurrences of date ranges. As you can see in my sheet, there is a column date_utc+1 which contains almost random date data. https://docs.google.com/spreadsheet/ccc?key=0AhqMXeYxWMD_dGRkVGRqbkR3c05mWUdhYkJWcFo2Mmc What I would like to do is 1) put the date values into bins of 6 hours each, i.e. 12/5/2012 23:57:04 until 12/6/2012 0:03:17 would be in the first bin, 12/6/2012 11:20:53 until 12/6/2012 17:17:07 in the second bin, and so forth. Then, I would like to count the occurrence of those bins, such as bin_from bin_to freq ----------------------------------------------- 12/5/2012 23:57:04 12/6/2012 0:03:17 2 12/6/2012 11:20:53 12/6/2012 17:17:07 19 ... ... ... Hope it is clear what I mean. Partial hints are very welcome as well since I am pretty new to spreadsheeting.

  Read the article

• Wired and Wireless Network Duplication

  - by Dave

  Howdy! Running into an issue when some of our client's have their laptop's connected via the wired ethernet network aswell as on the WLAN of the same network. There is know issues caused to the end clients.. BUT! Being a Managed Services Engineer i get pretty over the alerts that come through on our reports for machine's with the same hostname on the same network! We are not going to remove this monitoring because it does help a lot with detecting and stopping inferior users and things like that. So basically.. Question is, is there a way in Windows (third party programs welcome) to disable the wireless network when a wired network is connected and operational.. I know that Windows automticaly 'prefers' the wired network, however they are still both connected and therfore there is duplicate hostnames on the same network. Could also have stupid issues with DNS and things like that! Thanks!

  Read the article

• Win 7: How can I resize a window to make it much bigger than my screen?

  - by RexE

  I have a window that I'd like to make much bigger than my physical screen (explanation of why below). I hit Alt+Space, M, and then press the Up arrow to move the title bar above the physical top of my screen. However, when I press Enter to set it, the title bar snaps back to the top of my screen. How can I prevent this from happening? Background: I want to get a hi-res image of a neighborhood map so that it can be printed to a poster. Google Earth has a "Save as JPG" feature, which will save the map in the window to a file. The bigger the window, the bigger the JPG; so, I'm trying to make the window as big as I can. Alternate suggestions welcome.

  Read the article

• Website is live but ping times out

  - by infinity

  I have a client's website that is running on GoDaddy hosting and started behaving very strange recently. The site is up and running but when I try to ping it I get time out. The problem is PayPal doesn't work also Google Webmaster reported the site is down. The client spoke with support and they said there is no firewall or any other traffic filter on their side. The site itself is PHP. Any ideas are welcome. I've tried to send test IPN from PayPal to the payment URL and got: IPN delivery failed. Unable to connect to the specified URL. Please verify the URL and try again. Which makes me think that the website/server is inaccessible in some specific cases. The site URL is http://www.flavourly.com P.S.: I tried to ping it from different machines, ISPs and OS

  Read the article

• Nginx works on my linux machine but is not accessible from other computers in my local network

  - by crooveck

  In my LAN network I have a server with Scientific Linux (RedHat or Fedora based distro), I've done yum install nginx but the welcome page is not accessible from other computers in my network. When I do telnet open localhost 80 and then GET / HTTP/1.0 I get some html code from nginx, so it's running for sure. But when I want to connect remotly, doing telnet open 192.168.3.130 80 I get: Trying 192.168.3.130... telnet: Unable to connect to remote host: No route to host So I assume that there is something wrong with my network settings, maybe iptables or something else? Next step, I turned off iptables: service iptables stop and it helped, now I can connect remotely using telnet. So I think, I need to fix my iptables rules. I did some googling and found this rule -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT but it still didn't allow me to connect remotely when iptables is up. Can someone please help me setting a proper iptables configuration?

  Read the article

• Password not accepted when resuming from sleep

  - by Comrade

  My HP Pavilion dv-series notebook will not accept the user account password for the logged in user when resuming from sleep - message returned is Incorrect Password. Simply selecting the Switch User option reloads the login screen and allows me to log in as the same user with the same password that was originally rejected. And, yes I've tried it more than one (hundred) times in case you were thinking it's just a case of slippery fingers. Another interesting point is that it appears to be independent of the software running on the machine. Since the issue first appeared, I have done two clean installs where all HD partitions were wiped and new ones created during fresh installation of the OS. The first such clean install was of Ubuntu (Lucid) 10.04 amd-64, the second of Win 7 Pro 64 (from boxed disc and activated post install). Exactly the same symptoms, described above, are exhibited on both platforms. Have engaged in significant amount of Googling an come up empty so any ideas are welcome.

  Read the article

• Ctrl Alt Left/Right moves mouse - how to find responsible software?

  - by Unimatrix02

  Hi, I've got a bit of a strange problem. On one of our computers, pressing ctrl + alt + left/right/up/down will move the mouse pointer on the screen, but it's not clear which software makes this happen. It interferes with other software that uses these shortcuts. I've already tried disabling some software, such as WinKey and a Kensington mouse driver, but that didn't make a difference. It's happening on a Windows XP SP3 computer by the way. Does anyone have an idea of how to find the software that traps this shortcut? Suggestions for actual (types of) software that might be doing this are welcome too. Thanks!

  Read the article

• Which is the cheapest machine where I can run linux and plug in some webcams? (and with network inte

  - by marc.riera

  I'm looking for a very cheap machine to run a linux distro for security(anti-thief) software. I would like to be able to connect to the network and a couple of webcams. May be ip-webcams or usb-webcams. The idea is having a machine with batteryes, laptop style, but there is no need to have a display/monitor attatched all the time. I'm planning to spend no more than 200$, in case it also gets stolen. Any advice on what to buy? (all modifications to this security plan are welcome) Thanks.

  Read the article

• Don't understand [0:0] iptable syntax

  - by artaxerxe

  I'm struggling with some iptables rules. I'm a newbie in iptables. I found some resources where I get the following command related to iptables. This is stored in a file that will be executed. [0:0] -A PREROUTING -s 10.1.0.0/24 -p tcp -m tcp --dport 81 -j DNAT --to-destination 10.1.0.6:3128 Can anybody explain me what does [0:0] mean? Also, some link related to this in iptables are welcome. Thanks in advance! P.S. If you need more rules, just let me know.

  Read the article

• How to send emails without getting into Spam Act trouble?

  - by Jason

  Lets say I have a database of 60,000 emails. I would like to send them an email notifying them of a new related service (similar to what they've signed up) which adds value to what they already signed up to. I know most of them would welcome it but they did not opt-in for this new related service. I don't want to send out the email invite only to find out I got into some Spam Act trouble. What is a friendly way to reach these targetted audience?

  Read the article

• Router for Infrastructure Network

  - by amfortas

  We have an HPC operation that down the years has grown to several racks of gear at three sites, hooked up via Gigabit fiber and Catalyst 2960s (we control the links and switches). Thus far all machines have been on a flat RCF1918 10/8 but we are looking to segment the network in order to streamline matters for iSCSI and generally keep infrastructure equipment away from our end-users. We have now reached a point where we need to consider introducing VLANs for specific subnets and are wondering if it would be worthwhile in the longer run to acquire a small router to keep to keep track of all this stuff and cut down on the complexity of netmasks and routes on host machines, etc. Has anyone here had a similar experience? Suggestions as to suitable equipment would be welcome.

  Read the article

• asterisk Dial-plan?

  - by Rev

  Hi I want to make a dial plan for asterisk to do this: for incoming-call check the caller-id and if caller id is equal with specific number (for example 666) then hangup that call.(this dial-plan also known as anti ex-girlfriend ) also I wrote this dial-plan for doing this but it doesn't work well.(don't hangup then incoming call from 666 and go to queue macro) [macro-queue] exten => s, 2, Queue(${ARG1}) [default] exten => s, 1, Answer exten => s/666, 2 ,Hangup exten => s, 2, BackGround(welcome) exten => s, 3, Macro(queue,operator)

  Read the article

• Is there a way to save "work sessions" in linux

  - by mike

  I regularly work on different projects, using different software. For project 1 I need to open for ex : Filezilla, Gedit and Nautilus (set to a specific folder) For project 2 I need to open foz ex : Gimp, Nautilus (set to another specific folder) etc. What I would like is a kind of sessions manager, where I could create entries "project 1", "project 2", etc. And with one click or command, open all the softwares I need. Perhaps there's an easy way to write a batch file for this? Any idea is welcome :)

  Read the article

• Windows 7 hangs after longer inactivity of user

  - by scooby37

  I have serveral PCs running Windows 7 in different falvors (32- / 64-bit / Professional / Ultimate / ATI / Nvidia) - they all have one problem in common... ...if I don't work on any of them for a longer time and the screen goes off as it should be (all default settings!) they sometimes go into some kind of sleep mode where I get to see the desktop or whatever I did before leaving after moving the mouse or pressing a key - but nothing reacts for a different amount of time from serveral seconds to serveral minutes! Any hint that helps solving this anoying problem would be very welcome ;-)

  Read the article

• Suggest Cisco Router for a small company of 60-100 Users

  - by user69154

  Trying to find the right router to use - we'd like to go Cisco. We have ~60 programmers that do alot of remote server work. Will grow to 100 programmers by the end of the year. We've talked to companies that sell Cisco routers. While they make recommendations, we feel that the sales guys may be selling us an overkill solution. What kind of company (that is not linked to sales of routers) can provide a service to recommend the right kind of router for our company? There are lots of network engineers out there, but am looking for some company that focuses on advising a network solution. Any suggestions of companies are welcome.

  Read the article

• Why can I browse to localhost, not to my computer name? (IIS7) [closed]

  - by Lost Hobbit

  I'm not very clued up on IIS, but I'm trying to do something that I thought would be quite simple. In IE, if I browse to http://localhost:80, I am greeted with a pretty picture with a bunch of welcome messages and a big "IIS7", thanks to the graphic designers at Microsoft. In IE, if I browse to http://mycomputername:80, I'm greeted with 404. It may be my fault... perhaps I've done something weird. Chrome replies 404 to either of those. Should this work, and if so, what am I doing wrong, or what can I do to get it to work? What might cause this to happen and how can I fix it? EDIT To add a bit more information. I did find after posting this question that http://localhost:80 was the only URL I could access on my local PC. I could not access any of the virtual sub-directories on localhost via my browser.

  Read the article

• Desktop Fun: Battlestar Galactica Wallpapers

  - by Asian Angel

  Are you feeling nostalgic and/or sad now that the Battlestar Galactica series has finished up? Now you can add a bit of that Galactica goodness to your desktop with our Battlestar Galactica Wallpaper collection. If the image links fail for some reason you can download the entire set as a zipped file here. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution. For more fun wallpapers be certain to visit our new Desktop Fun section. If you are looking for some great icons to go with your new Battlestar Galactica wallpaper make certain to check out our Sci-Fi Icon Packs collection here. Similar Articles Productive Geek Tips Desktop Customization: Sci-Fi Icon PacksWindows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Starscape Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox)

  Read the article

• Desktop Fun: Steampunk Theme Wallpapers

  - by Asian Angel

  Do you enjoy imagining what it would be like to live in a world where technology and fantasy are mixed together? Then kick back and get ready to indulge in some great daydreaming with our Steampunk Theme wallpapers collection. Note: Click on the picture to see the full-size image—these wallpapers vary in size so you may need to crop, stretch, or place them on a colored background in order to best match them to your screen’s resolution.                         For more fun wallpapers be certain to visit our new Desktop Fun section. Similar Articles Productive Geek Tips Windows 7 Welcome Screen Taking Forever? Here’s the Fix (Maybe)Desktop Fun: Starship Theme WallpapersDesktop Fun: Underwater Theme WallpapersDesktop Fun: Forest Theme WallpapersDesktop Fun: Fantasy Theme Wallpapers TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 NoSquint Remembers Site Specific Zoom Levels (Firefox) New Firefox release 3.6.3 fixes 1 Critical bug Dark Side of the Moon (8-bit) Norwegian Life If Web Browsers Were Modes of Transportation Google Translate (for animals)

  Read the article

• How to cache dynamic javascript/jquery/ajax/json content with Akamai

  - by Starfs

  Trying to wrap my head around how things are cached on a CDN and it is new territory for me. In the document we received about sending in environment requests, it says "Dynamically-generated content will not benefit much from EdgeSuite". I feel like this is a simplified statement and there has to be a way to make it so you cache dynamically generated content if the tools are configured correctly. The site we are working with runs off a wordpress database, and uses javascript and ajax to build the pages, based on the json objects that php scripts have generated. The process - user's browser this URL, browser talks to edgesuite tools which will have cached certain pre-defined elements, and then requests from the host web server anything that is not cached, once edgesuite has compiled a combination of the two, it sends that information back to the browser. Can we not simply cache all json objects (and of course images, js, css) and therefore the web browser never has to hit the host server's database, at which point in essence, we have cached our dynamic content? Does anyone have any pointers on the most efficient configuration for this type of system -- Akamai/CDN -- to served javascript/ajax/json generated pages that ideally already hit pre-cached json data? Any and all feedback is welcome!

  Read the article

< Previous Page | 52 53 54 55 56 57 58 59 60 61 62 63  | Next Page >