Search Results

Search found 45689 results on 1828 pages for 'system serviceprocess'.

Page 560/1828 | < Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >

• NIC light is turned off after boot on Redhat 4.6 server

  - by hoffmandirt

  I have a 2950 blade server setup with Red Hat 4.6 installed. I cannot get the NIC to work properly after reinstalling Linux. I activated the NIC, but the NIC light will not turn on when I plug the network cable into the hub. The status light on the hub will not turn on either. If I run ifconfig, the NIC status is UP. Also I can ping the IP address that I assign to the Linux machine, but I can't ping anything else that is plugged into the hub. When I reboot the system, the NIC light will stay on until the system fully boots and then it will turn off again. Is there something else that I need to do to get the NIC working? It appears to be disabled even though ifconfig says that it is UP. Maybe I need to configure something within the blade server (iDRAC)?

  Read the article

• Resizing mysterious partition written by DDing an ISO file

  - by Jon

  I downloaded clonezilla and then wrote it to a USB flash drive with this: dd if=clonezilla.iso of=/dev/sdb I've confirmed that the system boots and clonezilla runs from the flash drive. I want to store a clonezilla backup on the same flash drive clonezilla is running on, but I tried it and ran out of space, so I started looking at how to resize the mysterious partition type that was generated from the ISO. fdisk -l /dev/sdb .... Device Boot Start End Blocks Id System /dev/sdb1 * 1 111 113664 17 Hidden HPFS/NTFS .... I've tried using ntfsresize from the Debian ntfsprogs package. I'm trying gparted next, but thought I'd ask here if anyone knows a neat way to resize a partition created on flash from a liveCD image. Thanks in advance Jon ps. Assume Debian 6 please.

  Read the article

• SCO UNIX problem: "Cannot create /var/adm/utmp or /var/adm/utmpx"

  - by Maktouch

  Hey everyone, I have an old server that doesn't boot. I don't know the version of unix installed, but I see SCO UNIX. It stops with that error: UX:init: ERROR: Cannot create /var/adm/utmp or /var/adm/utmpx UX:init: ERROR: failed write of utmpx entry: " " UX:init: ERROR: failed write of utmpx entry: " " UX:init: INFO: SINGLE USER MODE After that message, it just stops. I cannot write or press anything. Even CTRL + ALT + DEL does not work. I cannot get into the system. I have tried booting with a DamnSmallLinux LiveCD but it does not recognize the file system on HDA. Is there a way to either log in as root or bypass this error? Thanks.

  Read the article

• How to send local mail via postfix to another server

  - by scotts

  I have postfix set up for use as an STMP server to send mail for my domain, but I receive email for the domain via gmail/google apps. The reason I use my own postfix is because I send out a lot of transactional emails to my customers using a web app, and the volume would exceed what google allows with its SMTP servers. Everything works fine, except cron & system mail gets routed to local users on the server, not to the appropriate accounts at google mail. How can I route this system mail to the respective google mail accounts instead?

  Read the article

• How to view bad blocks on mounted ext3 filesystem?

  - by Basilevs

  I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted. I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?

  Read the article

• How to execute a shell script on startup?

  - by vijay.shad

  I have create a script to start a server(my first question). Now I want it to run on the system boot and start the defined server. What should I do to get this done? My findings tell me put this file in /etc/init.d location and it will execute when the system will boot. But I am not able to understand how the first argument on the startup will be start? Is this predefined somewhere to use start as $1? If I want to have a case startall that will start all the servers in the script, then what are the options I can manage. My Script is like this: #!/bin/bash case "$1" in start) start ;; stop) stop ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" ;; esac

  Read the article

• routing wiredness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router.

  Read the article

• How to set CHKDSK for drive C: in Windows 7

  - by prashanth

  I recently got a 0xc000007b error whenever I tried to run some application software. I found that CHKDSK for C drive might be a solution. When I tried to do it from C drive properties, it said the drive was in use and asked to schedule CHKDSK at the next reboot. I clicked OK. When I restart, I experience a BSOD. I waited for 10 minutes but still nothing happens. So I forced a shutdown (laptop) and again booted up the computer and got a BSOD for just 5 or 10 seconds and system boots and works with no problem. I repeated all these steps four or four times and yet with the same results. Is there any other way other than CHKDSK to solve the 0xc000007b error? If not, why is CHKDSK not working at boot up? Can I force CHKDSK on drive C: to perform while the system is on? Platform: Windows 7 64-bit.

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  Hello, I tried installing MediaPortal (http://www.team-mediaportal.com) on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3; 512mb DDR; 80GB IDE; K-World PVR-TV7131 Analog TV-Tuner; Inno3d FX5500 128mb 64bit; When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• What is the impact of Windows 8 with UEFI on normal users?

  - by Sam

  I am a normal man-in-the-street computer user and so do not really understand what this is about, but I want to. Can someone please explain to me if: The Windows 8/UEFI secure boot thing will make it impossible to run normal/legacy applications in Windows 8 (as they will be unsigned)? It will turn Windows into an Apple-like system where only Microsoft approved applications can be run? As I say, I'm a normal user, and that is the overall impression I have from reading all the blogs, etc about it. If, on the other hand, all it does is make sure the system is booting a signed OS, how does this prevent malware (which is what at least two Microsoft blogs that I read seemed to be saying), given that most malware is not part of the boot process? The only way I can see this making sense is if it is ensuring that all OS components are signed. Is that it? Like I say, I'm a mortal, so please don't get technical on me, but rather explain how it will affect me, the user.

  Read the article

• Strange strace and setuid behaviour: permission denied under strace, but not running normally.

  - by Autopulated

  This is related to this question. I have a script (fix-permissions.sh) that fixes some file permissions: #! /bin/bash sudo chown -R person:group /path/ sudo chmod -R g+rw /path/ And a small c program to run this, which is setuided: #include "sys/types.h" #include "unistd.h" int main(){ setuid(geteuid()); return system("/path/fix-permissions.sh"); } Directory: -rwsr-xr-x 1 root root 7228 Feb 19 17:33 fix-permissions -rwx--x--x 1 root root 112 Feb 19 13:38 fix-permissions.sh If I do this, everything seems fine, and the permissions do get correctly fixed: james $ sudo su someone-else someone-else $ ./fix-permissions but if I use strace, I get: someone-else $ strace ./fix-permissions /bin/bash: /path/fix-permissions.sh: Permission denied It's interesting to note that I get the same permission denied error with an identical setup (permissions, c program), but a different script, even when not using strace. Is this some kind of heureustic magic behaviour in setuid that I'm uncovering? How should I figure out what's going on? System is Ubuntu 10.04.2 LTS, Linux 2.6.32.26-kvm-i386-20101122 #1 SMP

  Read the article

• how to disable isight auto adjustments ?

  - by George Profenza

  The built-in isight cam on my macbook machine keeps re-adjusting the lighting (and focus I think). I need to manually set those, but I found nothing of any use in System Preferences or System Profiler. Any way to access the settings ? Any magic terminal commands that allows access to the camera ? Anyone has a driver that allows for any camera access ? 'mac - it just works'...sure, if you want to use it like a kid. the second you actually want to do something with you mac other than the basic things, you can do on ANY regular machine anyway, your 'rights' are done with, as apple seems to only encourage dumb clients. I'm not saying saying this applies to all mac users, but the 'typical/average' one in my view is only going to use it for media(music,video) and web(facebook,blogging, all that) and maybe podcasting,webcasting,etc....ok this is turning into a rant, so I will finish here.

  Read the article

• Partition table correpted in windows 7 machine as simple dynamic partition

  - by raki

  I have Windows 7 installed in my system. When I originally partitioned it I made 3 partitions and 16 gb space as unallocated. Later I tried to create a partition using this free space using diskmanagement tool. It shows free space as unusabe space and the only one option available is to make it as a simple partition. Unfortunately I made it as simple partition and all my partitions converted to simple dynamic partition. Now after reboot the OS is not loading. I tried to reinstall the OS by formatting the C drive, but it doesn't work. Now I can't load the OS properly. How can I install Windows 7 on my system without losing my data on the other two drives?

  Read the article

• how to word wrap, align text like the output of man?

  - by cody

  what is the command that word wraps and justifies a text file so that the output looks like that of a man page: All of these system calls are used to wait for state changes in a child of the calling process, and obtain information about the child whose state has changed. A state change is considered to be: the child terminated; the child was stopped by a signal; or the child was resumed by a signal. In the case of a terminated child, performing a wait allows the system to release the resources associated with the child; if a wait is not performed, then the termi- nated child remains in a "zombie" state (see NOTES below). Thanks.

  Read the article

• Disabling networkmanager for a specific interface

  - by bdonlan

  I'd like to do some experimentation with hostap without disabling my primary wireless interface. How do I tell networkmanager to keep its hands off a specific interface or interfaces while allowing it to continue managing all other interfaces normally? I'm using Ubuntu 9.04. (Wasn't sure if this should go on superuser or serverfault, as networkmanager isn't much of a 'server' tool - if it belongs on serverfault please feel free to move it) Edit: I've tried adding this to /etc/network/interfaces: allow-hotplug wlan2 iface wlan2 inet static address 192.168.49.1 netmask 255.255.255.0 But this has no apparent effect, even after restarting NetworkManager. Here's my /etc/NetworkManager/nm-system-settings.conf: [main] plugins=ifupdown,keyfile [ifupdown] managed=false Edit[2]: Looks like I needed to restart nm-system-settings, then NetworkManager.

  Read the article

• Install Windows 8 64-bit over the top of Windows 8 32-bit

  - by Andrew Gee

  I currently have Windows 8 32-bit installed from MSDN (I didn't realise at the time that my processor supports 64-bit). I understand that you can't upgrade within Windows 32-bit to 64-bit directly from the ISO. I have burned the ISO to a DVD, and have attempted booting from this drive. The problem I am encountering: The operating system couldn't be loaded because a required file is missing or contains errors. File: CI.dll Error code: 0xc0000221 You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. Additional info: Computer: HP Pavillion m9280.uk-a Processor: AMD Phenom 9600 Quad-Core RAM: 3 1GB sticks Thanks in advance!

  Read the article

• Windows XP runs New Hardware Wizard for usb keyboard and mouse, can't find drivers

  - by Randy Orrison

  I have a PC that up until a couple days ago was working fine. I moved it from one site to another and now when I plug in the USB mouse or keyboard (the same ones that were working previously) XP brings up the New Hardware Wizard. Going through it, the correct keyboard and mouse are identified, but XP can't find the drivers. I've tried manually searching for the driver (using the Have Disk option) - the first file it's looking for is in the c:\i386 directory, but that installs a generic HID mouse device; the system then runs the hardware wizard for a new "unknown" device. The system was SP2, I have installed SP3 in hopes that would help, and I've also downloaded and installed the mouse drivers from Dell's site (there are no specific drivers for the keyboard), with no change. Before I completely reinstall XP, is there anything else I should try?

  Read the article

• Easy Transfer from a dead computer

  - by Nathan DeWitt

  I had a computer that electrocuted me and the company sent me a new one. The hard drive from the old computer works fine and is in my new computer. I would like to transfer my files from the old drive to the new one, preferably using Easy Transfer (old & new computers were Win7). When I go through the Easy Transfer wizard, it assumes my old computer is running and that I can run a process to backup all my data to a single file. However, in my case I have the system drive in my new computer and want to pull the data off it. I would like to avoid rebooting the old computer, to avoid damage to myself or my data. I would like to avoid booting into the old system drive, as my new hardware is significantly different and I imagine I'll run into some missing hardware issues. What's the easiest way to get my data off this drive?

  Read the article

• PHP Kohana CentOS 5

  - by Undefined

  Trying to deploy a Kohana based project in CentOS 5. Installed PHP 5.3.1 but still getting the following error. Warning: preg_match() [function.preg-match]: Compilation failed: this version of PCRE is not compiled with PCRE_UTF8 support at offset 0 in /usr/local/apache2/htdocs/icarus/system/core/utf8.php on line 30 Fatal error: PCRE has not been compiled with UTF-8 support. See PCRE Pattern Modifiers for more information. This application cannot be run without UTF-8 support. in /usr/local/apache2/htdocs/icarus/system/core/utf8.php on line 38 Trying since last 2 days, i upgraded my PHP from 5.1 to 5.3 but still getting the same error.The problem as per me is that the PCRE module of PHP in phpinfo() says is of sep 2004. Below is the actual line PCRE Library Version 5.0 13-Sep-2004 Can anyone tell me how to upgrade it or wats the solution to the problem. Thanks.

  Read the article

• Nvidia Optimus shows Nvidia card is always active in Windows 8

  - by Ty Underwood

  I have loaded the new Asus Nvidia driver for my Asus Ux32VD that I have installed Windows 8 on. It has an Nvidia 620m and Intel hd 4000 integrated graphics. The problem is that the Optimus activity icon in my system tray shows that the Nvidia card is always active, though it shows that it is not doing anything. I can force the system to prefer the Intel graphics, and after rebooting, the Nvidia card will shut off, but then all the programs will be overridden and use the Intel graphics. Is anyone else having problems with Optimus in Windows 8? My battery life is really suffering because I'm always idling my Nvidia card while also presumably running the Intel card. Any suggestions would be appreciated.

  Read the article

• Basic questions about network topologies

  - by laoshanlung

  I have just started learning about network topologies, but there are a lot of confusion about different types of network topologies i have learnt so far. First of all, BUS topology. If i have like 100 PCs in the same wire connected using BUS topology, and the network connection speed is 100Mbps, then each PC will have a connection of 1Mbps, right ? With the same scenario, if i connect those 100 PCs using STAR topology, then each PC will have a connection of 100Mbps ? Then with the TREE topology, i divide the system into 10 sub-system (10 tree branches) , each branch has 10 PCs, then i will have other 10 small "BUS-topology" networks each one will have a connection of 10Mbps and therefore each PC will also have 10Mbps ? And the last one is RING topology, 100 PCs, each PC will have 100Mbps connection ?

  Read the article

• Rail's FileStore with Linux Disk Caching or RAMdisk?

  - by Yo Ludke

  I have a Ruby on Rails application that stores it's catched files on the filesystem (Rails file-system cache). I was thinking about changing to memcached Store, but a short test shows it isn't a big difference in speed. From linuxatemyram.com I learned a bit about file caching. On the current machine there would be around 40..45GB RAM left which isn't needed for the application and which can be used to linux-disk-cache this rails file cache store. The disk is a RAID10 system with almost 120MB disk perfomance. How can I tell Linux to use free RAM more deliberately and not to be shy about using it? Do think it's necessary to adjust a sysyctl/.. value here, or would I have performance advantages to put the File Store root diretory on a ramdisk? (Loosing the cache during a reboot wouldn't be a problem)

  Read the article

• Disable Power Management in Fedora 12

  - by MA1

  How to disable the power management in fedora 12, so that lcd/monitor should not go to sleep/off when system is idle?

  Read the article

• Color Calibrate Dual Monitor XP SP2

  - by Laramie

  This topic has been touched on before but not really answered. I have a dual monitor system and the colors differ wildly. I currently live Buenos Aires where color correction hardware costs premium prices. I do some graphic design, but don't require a pro-level calibration. That said, I'd like my monitors to be set as close to "true color" as possible. I've located the useful and free Monitor Calibration Wizard, but it seems to adjust the entire system internally at startup. I could use the Microsoft Color Control Panel Applet to set a different ICC or ICM profile for each monitor, but the Monitor Calibration Wizard outputs its own format for profiles.

  Read the article

• Nagios Check_hpjd giving me problems!

  - by Mister IT Guru

  When I run the following [root@host plugins]# ./check_hpjd -H printer1.mydomain.com : Timeout from host printer1.mydomain.com I have Net-snmp installed on my system, I noted that i didn't have net-snmp-utils installed, and then I was able to run [root@host plugins]# snmpwalk -Os -c public -v 1 printer1.mydomain.com system sysDescr.0 = STRING: HP ETHERNET MULTI-ENVIRONMENT sysObjectID.0 = OID: enterprises.11.2.3.9.1 sysUpTimeInstance = Timeticks: (325408663) 37 days, 15:54:46.63 sysContact.0 = STRING: sysName.0 = STRING: printer1 sysLocation.0 = STRING: sysServices.0 = INTEGER: 72 So I know that the printer is working as expected, (as far as SNMP is concerned). But when I run [root@host plugins]# ./check_hpjd -H printer1.mydomain.com -C public Error in packet () I get this error - From what I've tried so far, I know my host can communicate via SNMP, I know the printer responds via SNMP, so I guess I'm left to look at the plug-in, which I will be checking up on. I'm new to SNMP, I am investigating this with my good friend Google search, but I am on a learning curve here, so please forgive my questions if they sound stupid,

  Read the article

< Previous Page | 556 557 558 559 560 561 562 563 564 565 566 567  | Next Page >