Search Results

Search found 24609 results on 985 pages for 'private ip'.

Page 562/985 | < Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >

• Sorting IPv4 Addresses

  - by Kumba

  So I've run into a quandary on sorting IPv4 addresses, and didn't know if there was a set rule in some obscure networking document. Do I do a straight sort on the raw address only (such as converting the IP address to a 32bit number and then sorting), do I factor in the CIDR via some mathematical formula, do I sort via the CIDR only (as if I'm comparing the network size and not the addresses directly)? I.e., normal math, we'd do something like -1 < 0 < 1 to denote the order of precedence. Given say, 10.1.0.0/16, 172.16.0.0/12, 192.168.1.0/24, and 192.168.1.42, what would be the order of precedence?

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• High Lock Wait ratio in MySQL

  - by FunkyChicken

  on my site I log every pageview (date,ip,referrer,page,etc) in a simple mysql table. This table gets very little selects (3 per minute), but a lot of inserts. (about 100 per second) Today I changed this table from an InnoDB table to a MEMORY table, this made sense to me to prevent unnecessary hard disk IO. I also prune this table once per minute, to make sure it never get's too big. -- Performance wise, things are running fine. But I noticed that while running tuning-primer, that my Current Lock Wait ratio is quite high. Current Lock Wait ratio = 1 : 561 My question: Should I worry about this Lock Wait Ratio? And is there something I can change in my my.cnf to improve things so that the lock wait ratio isn't so high?

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• how to create xampp mysql remote connection within my office ,

  - by Ranjit Kumar

  Before asking this question : i have gone through this link How do I allow remote access to mysql using xampp? But i couldnt make it up !!! i have installed xampp using xamppinstaller.exe and its version is 3.1.0. i am heidisql Gui for database managament i tried the same by changing the # bind-address from "127.0.0.1" to my system ip address as # bind-address to "192.168.1.69" After changing and restarting my xampp mysql i went to other system and tried to login (hedisql) with the hostname 192.168.1.69 and it gave me an error saying Error 1130(0000): host' ....' is not allowed to connect to this mysql server. what should i do please help me !!

  Read the article

• ASP.NET directories blocked from VisualSVN Server behind reverse proxy in IIS 6

  - by user143344

  I’ve got VisualSVN Server running behind a reverse proxy in IIS 6, Windows Server 2003. This isn’t ideal, but for the main web app on the server I’ve only got one IP address and SSL certificate available. Everything works except for when trying to commit to or browse the default ASP.NET directories (App_Browsers, App_Code, App_Data). SVN commits fail for these directories – which I believe is because IIS will never serve them by default. The reverse proxy uses a virtual directory in IIS – is there a change I can make in the web.config for this virtual directory to get around the issue?

  Read the article

• Best way to monitor host

  - by Axle

  I have just set up a host which receives messages from 300b to 1500b (wrapped stx etx)and replies with the same. It works fine but some times it receives junk data. Is there anyway to monitor this out of band data just so we can make sure we are not receiving massive amounts of it. Also is it possible to monitor if connections time out - where the host did not reply in time or long connections where it takes the host 20 seconds to reply when it normally takes 5. I am aware of IP monitor but I don't think it covers enough - Is there anything else or any other way? Thanks in advance!

  Read the article

• Can a named (bind) crash make a server unreachable?

  - by giorgio79

  My server recently became unreachable, and after restart a named error was the last line I found in /var/log/messages before restart: Jun 26 00:15:06 host named[1303]: error (network unreachable) resolving 'dlv.isc.org/DNSKEY/IN': 2001:500:71::29#53 Jun 26 06:38:55 host kernel: imklog 5.8.10, log source = /proc/kmsg started. Jun 26 06:38:55 host rsyslogd: [origin software="rsyslogd" swVersion="5.8.10" x-pid="1294" x-info="http://www.rsyslog.com"] start Jun 26 06:38:55 host kernel: Initializing cgroup subsys cpuset Can a named crash make a server unreachable? I doubt it, as I assume I should still be able to login with ssh via IP, but the server did not respond...So, I am trying to make heavy guesses here.

  Read the article

• VNC unattended Server (No user Interaction)

  - by Louis van Tonder

  I worked on a proof on concept a while ago.... whereby I managed to get VNC going in full "unattended" mode... I.e. The VNC Server dials into the viewer... which is running in Listening mode. The same concept of how single click works, but without the user interaction. I cant seem to locate my source files for this concept I worked on... although I have found my shortcut that worked on the Viewer side to listen. "C:\Program Files\UltraVNC\vncviewer.exe" -listen 5007 /noauto /256colors I can not however remember/locate my demo of what the server is doing.... how to configure it. If I remember correctly, the server was also started with command line params that "dialed" into a remote IP/port, that the viewer is listening on. Any ideas? Thanks

  Read the article

• REST-based file server

  - by Chris Wenham

  I need to be able to PUT files and GET them later using nothing but HTTP, so I went searching for something that might match the terms "REST file server" or "HTTP file server" or "REST drop-box", etc. Unfortunately, these terms bring up the wrong kind of results on Google. What I want is the equivalent of an SMB fileshare over HTTP. Some ideal features: Can PUT a file of any type at http://servername/service/any/path/I/want/document.pdf Anyone with access can GET that file at the URL I PUT it at Supports AV scanning on any new file that has been PUT Supports DELETE of existing resources (files) Our shop runs Windows, but I'd be interested to know about Unix software that can do this kind of thing, too. It's to be used in an IT department for private users only. It won't be on a public-facing IP address. Does anything like this exist?

  Read the article

• Django fails to find static files served by nginx

  - by Simon

  I know this is a really noobish question but I can't find any solution despite finding the problem trivial. I have a django application deployed with gunicorn. The static files are served by the nginx server with the following url : myserver.com/static/admin/css/base.css. However, my django application keep looking for the static files at myserver.com:8001/static/admin/css/base.css and is obviously failing (404). I don't know how to fix this. Is it a django or an nginx problem ? Here is my nginx configuration file : server { server_name myserver.com; access_log off; location /static/ { alias /home/myproject/static/; } location / { proxy_pass http://127.0.0.1:8001; proxy_set_header X-Forwarded-Host $server_name; proxy_set_header X-Real-IP $remote_addr; add_header P3P 'CP="ALL DSP COR PSAa PSDa OUR NOR ONL UNI COM NAV"'; } } Thanks for the help !

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• Port Redirection on Mac OS X Lion

  - by Andreas

  I have tried to solve this issue using pf but with no luck. Basically, I am trying to redirect incoming port 443 traffic to port 22. I have tried to set up a rule in a file and load it in pf but I get syntax error. Can anyone with more experience with pf provide some insight? Here's what I've attempted: pass in on en1 proto tcp from any to any port 443 rdr-to 127.0.0.1 port 22 and pass in quick proto tcp to port 443 rdr-to 127.0.0.1 port 22 I've been able to do this in MacOSX Snow Leopard with ipfw: sudo ipfw add 1443 forward 127.0.0.1,22 ip from any to any 443 in but it doesn't work in Lion (it gives me an Invalid Argument error).

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• Removing (Presumably) Extraneous Network Adapters from Device Manager (eg WAN Miniport)

  - by Synetech inc.

  Can anyone shed some light on the default items in the Network Adapters branch of the Windows Device Manager? In addition to the network card, there are always a bunch of other things that I cannot find any useful information on such as RAS Asynch Adapter and all the WAN Miniports (IKEv2, IP(v6), L2TP, Network Monitor, PPPOE, PPTP, SSTP). I would like to trim it down and uninstall whatever possible but cannot find out exactly what these items are responsible for (and therefore whether or not they are needed on my system). Most of the pages found with Google are either people trying to fix an error with such an item or someone asking what it is and being given an unhelpful, pat response like “just leave them alone” or “they’re necessary”. I highly doubt that is the case and I’m certain that at least some items can be removed because even if they become necessary in the future they can be added again (for example installing Network Monitor or Protowall reinstalls the miniport drivers anyway).

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Routing application traffic through specific interface

  - by UnicornsAndRainbows

  Hello All! First question here, so please go easy: I have a debian linux 5.0 server with two public interfaces. I would like to route outbound traffic from one instance of an application via one interface and the second instance through the second interface. There are some challenges: both instances of the application use the same protocol both instances of the application can access the entire internet (can't route based on dest network) I can't change the code of the application I don't think a typical approach to load balancing all traffic is going to work well, because there are relatively few destination servers being accessed in the outbound traffic, and all traffic would really need to be distributed pretty evenly across these relatively few servers. I could probably run two virtualized servers on the box and bind each of them to a different external ip, but I'm looking for a simpler solution, maybe using iproute or iptables? Any ideas for me? Thanks in advance - and I'm happy to answer any questions.

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Recommend a mail server setup for multiple domains

  - by Greg

  Hi all, I've just set up a new Debian web server which I have done plenty of times before, but I want to add a mail server which I have never done before. I am aware of this question, but I would like someone to recommend packages and briefly explain how to use them for providing pop/imap access on multiple domains, a concept that has confused me for a while. I'm planning for this server to grow slowly but surely, from serving an initial 5 or 6 domains to about 20 in the first year, continuing at this rate. (yes, I've jumped on the cloud bandwaggon). At the moment, I have a DNS-A record pointing to my server's IP and nothing else. I'm assuming that I need a DNS-MX record pointing there too, but I haven't read up about it yet so today that's what I'll be doing. Hopefully reading up on the subject and the help that I get here will get my server up and running in no time. Thanks!

  Read the article

• Terminal Server 2003 Performance Troubleshooting

  - by MikeM

  Let me get your thoughts on terminal server performance problems. The server hosts average 25 users which, after running some numbers, on average use 600MB memory with their main applications running (web browser, adobe reader, IP phone client). All users are on the same LAN as server. We constantly experience slow response and short session lockups. Combined CPU usage is on average 10%. What appears strange to me is that the system shows 29GB physical memory with 25GB of it free. The page file usage is about 50% averaging 9GB used. Some server specs OS: Server 2003 32bit Enterprise with /PAE flag RAM: 32GB CPU: 2xQuad Core @ 2.27Ghz HD: RAID5 1.2GB After doing basic troubleshooting using performance monitor it leads me to believe that the performance problems are caused by the 32bit OS limitation in addressing full 32GB of physical memory even though the /PAE flag is used. Can anyone suggest something, troubleshooting steps that can lead to a more conclusive answer? Thanks

  Read the article

• VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

  - by Chris Miller

  Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows server 2008r2. I need to set up a site-to-site style VPN using IPsec between the firewall of one ISP and the windows host on the other (gateway-to-host). This host has to run a SQL-Server that I can access from the other ISP's servers through the VPN tunnel. It seems looking at the RFC for IPsec that this should be possible using the features of Windows 2008, but I can't get it to work so far... It seems that I can't access any services running on the same computer or IP address used as the tunnel endpoint? Thanks Chris

  Read the article

• What port should I use for my reverse proxy to Apache 2 from nginx?

  - by meder

  I have nginx setup as the defacto port 80. I want to setup django+mod_wsgi on Apache2. I'm worried if I leave Apache2 as 80 it will cause a conflict. Is it better to avoid the headache and change Apache to a different port? server { listen 80; server_name work.domain.org; access_log /www/work.domain.org/log/access.log; error_log /www/work.domain.org/log/error.log; location / { proxy_pass http://127.0.0.1:8080/; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Magic-Header "secret"; client_max_body_size 10m; } }

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• vncviewer connection refused (61)

  - by coure2011

  I have a root access to VPS (centos 6). I have installed VNCServer using this guide line http://tournasdimitrios1.wordpress.com/2011/02/02/how-to-setup-vnc-server-on-centos-5-x-fedora-11/ Everything goes perfectly and server is running via termina. Now I am trying to connect to that server via vncviewer (mac os). but its giving me error Connection refused (61) I am providing only the IP address of the VPS, maybe I also needed port address? How to configure port on vncserver? or its something else?

  Read the article

< Previous Page | 558 559 560 561 562 563 564 565 566 567 568 569  | Next Page >