Search Results

Search found 19009 results on 761 pages for 'network shares'.

Page 563/761 | < Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >

• Help setting up wireless in Ubuntu 13.04

  - by James

  I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

  Read the article

• How to get Wifi Working Properly - I am Noob

  - by user287853

  I'm a noob to Ubuntu, but not computers. I installed a full version of Ubuntu version 12 whatever it is. I run it on a machine that has Win7/Win8 on another hard drive. My wireless adapter is some tiny USB stick I got on eBay - it works great in Windows, but I can't get it to work in Ubuntu. More precisely, Ubuntu is providing me a list (sometimes) of wireless networks in the area and when I try to connect to mine it just keeps password prompting me even though the one I use is correct. I looked over all the settings multiple times and don't believe there is anything in error regarding what it takes to connect to my network. So, I thought maybe it is a driver issue and came across NDIS. I thought I should try installing it, but I don't know how when I can't connect the Ubuntu machine to the Internet. I tried some commands to no avail. I have the Ubuntu installation disc and it shows a NDIS common and utils .deb files in there. Can someone out there help me out to get this wireless setup so I can get online?

  Read the article

• BITS http download job fails to connect for owner Local SYSTEM account

  - by MikeT

  A service I have written that uses BITS (Background Intelligent Transfer Service) to auto update itself is having a problem on some machines (Windows 7 so far). I have been investigating and have discovered that some of the jobs that my service adds to the bits queue are failing immediately with the error code 0x80072efd (a connection with this server could not be established). The is not problem with connecting to the server for the download as it works fine on the same machine using IE (or any other web browser) and other clients can connect and update from the same server. I tried using the BITSADMIN.exe tool to add the jobs manually and they worked ok. I then changed the account my service was running under to the network service account so the bits jobs would be created with a different owner and the jobs completed successfully. My question is I don't want to run my service as this account as it wont have the required local permissions, so how to I change the permissions of the local system user to allow it to download from the HTTP source, I'm not aware of any way of this being restricted for this account but it obviously is.

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• Linux IPv6: DHCP and /127 prefixes

  - by Jeff Ferland

  I've tried multiple pieces of DHCP client and software in attempting to setup a solution for allocating a /127 prefix to virtual machines so that each maintains its own layer 2 isolation. Because there would only be one host assigned to each network, a /64 is impractical. While the prefix size could reasonably be somewhere in the /64-127 range, the crux of the problem has been the same regardless of the software used in configuring: the DHCP call to bring up the interface uses the address advertised by DHCPv6 and inserts two routes: the /127 given by the router advertising packets and a /64 as well. Any thoughts on why I'm getting the additional route added across dhcp client vendors?

  Read the article

• Is there a way to customise PPD distribution of printer drivers effectively with Mac Os X server?

  - by glenstorey

  Hi, we have two network printers shared via our 10.5.8 Mac Os Server machine. They have drivers provided by the manufacturer that allow job logging (printing with a print code). I've installed said drivers on the server, but when we distribute the printer on our Mac Os clients (using add printer via bonjour) it deploys older drivers that don't support Job Logging. Is there a way to update the store of print drivers (cups drivers?) on the server so it distributes the updated drivers, rather than the older one?

  Read the article

• how to make a very large radmind image, faster

  - by Wang

  Making the new Snow Leopard radmind image* for my lab involves manipulating over 50GB of applications, including passing them over the network. Each try takes four hours or more, and if it fails there's no apparent way to pick up again from partway through. Instead I have to delete all the data (a minutes-long operation) and start over. Furthermore, one successful upload just means now I get to test whether the image works; if it doesn't, I can look forward to repeating the upload as many times as I need to troubleshoot. How can I do this faster and/or smarter?

  Read the article

• Security of a free public VPN service

  - by Mark Belli

  I just started using VPNBOOK, which is a (very efficent) free VPN solution. I have a question: VPNBOOK user and pass used to connect to their vpn network are publicily available on their homepage; everybody uses them to connect to the vpn. Can a user intercept my wifi traffic and: Understand that my connections are directed to VPNBOOK servers. If point 1 is successful, then they could use VPNBOOK public user and pass to decrypt my traffic? I hope I am missing something, otherwise it would be a very big weakness and I would revert to a paid service (with a private account)

  Read the article

• Oracle Identity Management 11gR2 Live Event - New York

  - by Tanu Sood

    Are you in New York or the vicinity on September 6? If so, come join Amit Jasuja, Senior Vice President, Security and Identity Management at Oracle as he discusses the evolution of Oracle identity Management solutions and the business drivers (and industry trends) behind those. You have heard about some of the new experiences delivered with the latest release of Oracle Identity Management - simplified user experience, enhanced security and seamless enablement for secure cloud and mobile environments. Now come see it in action and hear what customers, your peers, are saying about their implementations. This forum will also be a great opportunity for you to connect directly with technology experts and network with industry professionals. There is still time left to register so book your space today. Registration details as well as the agenda for the day can be found here. We look forward to hosting you on Thursday, September 6th. Oracle Identity Management 11gR2 Live Event – New York Thursday, September 6, 2012 Oracle NYC Office 101 Park Avenue 4th Floor New York, NY 10178 Register Here Not in NY on Sep 6? Find an event near you in North America.

  Read the article

• Auto log off windows machine after certain number of minutes

  - by Marty Heath

  I have three machines on my network, two are windows xp and one is windows 7. i would like to have all three machines log a user off if they are on for more than 60 minutes. And I would like this to be applied to the machine not on a per user basis, because I do not want this policy to apply to those users on any other machine. I have installed winexit.scr on one of the machines but the problem is that I cannot change the default value of 10 minutes for the screensaver because that is controlled through group policy, and I cannot seem to find where to change that through group policy on a per machine basis NOT on a per user basis. If I have left out any details I apologize please let me know anything that is needed

  Read the article

• Unable to connect guest using VMWare Player

  - by eLAN

  I'm running RedHat server 5.3 as guest on Window XP VMware palyer. the network setting is set to "Host Only", but I have tries all other settings. I'm able to ping the guest machine, but I'm unable to connect it in any other way including webserver, Tomcat, Telnet, ssh. all of the services above are working from within the guest (using localhost). Guest firewall and SELinux are disabled. any idea on what I should check next? every idea will be appreciated... thnaks Ilan

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• mounts aren't case-sensitive

  - by Asi

  I mounted a few drives from Linux boxes in my network, but those mounts aren't case-sensitive. The mount command I used ( from the man mount.cifs, case-sensitive should be the default ): mount //10.0.1.10/remote_folder /local_folder -t cifs -o username=xxxx,password=xxxx but those mounts aren't sensitive. for example doing: ls -l /local_folder/testfile.txt ls -l /local_folder/TESTFILE.TXT give's the same result... instead of 'file not found' Couple of important points: All drives are running on Linux machines. My local machine is running Fedora 18 and it is case-sensitive for ANY folder/file expect the mounted drives. All drive/mounts are case-sensitive when when doing SSH. So if I SSH from my local machine to a remote machine, doing ls -l /local_folder/TESTFILE.TXT will say file not found as it should. So I believe the issue is in my local machine and not in the way I did the mount. but I'm not sure where to look next (I'm new to Linux)

  Read the article

• TCP connection stuck in SYN_RECV state despite ACK received, Linux 2.6.18, embedded, ARM

  - by waynix

  My client cannot connect to my protocol port (TCP) after some network glitches, even though all other protocols (telnet/HTTP/FTP) work fine. netstat shows that my server is listening and tcpdump on the server shows all 3 packets are exchanged: 18:29:16.578964 IP 10.9.59.10.3355 10.9.43.131.5084: S 2602965897:2602965897(0) win 65535 <mss 1460,nop,nop,sackOK> 18:29:16.579107 IP 10.9.43.131.5084 10.9.59.10.3355: S 3464857909:3464857909(0) ack 2602965898 win 5840 <mss 1460,nop,nop,sackOK> 18:29:16.579284 IP 10.9.59.10.3355 10.9.43.131.5084: . ack 1 win 65535 But somehow netstat -t shows the connection still in SYN_RECV, as if the ack is not seen by the TCP state machine. I have to restart my server to get it to work. syncookie is not enabled, and I know from client code behavior and tcpdump that there is no SYN flooding. Help much appreciated.

  Read the article

• Converge Voice and Data networks using Sonicwall

  - by skinneejoe

  We are looking to converge VOIP and Data traffic onto a single wire so that our client's VOIP phones pass data through to the users computer. We are specing out a new Sonicwall NSA appliance to handle routing functions and layer 2 switches to manage VLANS. Not a huge network, medium sized. What should I know about converging the networks onto a single wire? Obviously I'll want to prioritize voice traffic, is this handled solely in the Sonicwall with QoS configurations or do the layer 2 switches need to be configured differently? Any other pitfalls I should be aware of, or any good resources for learning more?

  Read the article

• Best Small Linux Distribution for rDesktop

  - by d2jxp

  What would be the best linux distribution to use just for the purpose of rDesktop? We're trying to decide if we should get rid of old computers or just use them as thin-clients to connect to virtual Windows 7 machines on our network. I would like something with as little bloat as possible and can be run from a USB flash drive. I have tried SliTaz, ThinStation, and Pixil from Century Software. SliTaz has been my favorite so far but I still want to know if there's something better that's also easily customizable.

  Read the article

• Computer froze up

  - by Arlen Beiler

  Why would my computer freeze up out of the blue? I have Apache Webserver w/php, and MySQL server installed. I am not sure exactly when it happened, but I was doing something on a wordpress site that I have installed, and it just waited and waited and waited. Then, all the folders on it that were open on my other computer closed, as though I had disconnected it. Then the skype account went offline. The computer was totally froze. I thought maybe it was someone on logmein, but disconnecting it from the network didn't do anything. I had to "crash" it (held in the power button till it shutdown). It started up normally then and the logs showed absolutely nothing wrong. And doing the same thing that I did when it froze didn't repeat the freeze. Any ideas, I never had this happen before.

  Read the article

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Distribute outgoing connections among multiple IPs configured on the same NIC

  - by cedivad

  I have a NIC with 2 aliases on it. The network interface has 3 IPs configured on it. Think about it like this: i can ping the same server by hitting .100 .101 and .102. I want the source address of the outgoing connections to be distributed among these ip. So if i have 3 opened connections, one connection will have result as having an IP address ending with .100, the other two should result as having as ip addresses .101 and .102. I'm using FreeBSD but I think this question to be Linux-Like wide.

  Read the article

• Why is my hosts file not working?

  - by elliot100

  I've been using the hosts file to for local website development, and it's recently stopped working. No entries other than localhost resolve. I've simplified to test, so it now contains only 127.0.0.1 localhost ::1 localhost 127.0.0.1 test.dev localhost responds to ping, test.dev does not. The file is called hosts with no extension It has no trailing spaces It's saved in C:\WINDOWS\System32\drivers\etc which matches the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DataBasePath Oddly, despite UAC being on, I can edit, delete and save the file without admin permissions No proxy is being used, PC is not connected to network for testing Stopping the DNS Client service seemed to resolve the issue for a few minutes, test.dev briefly resolved but doesn't any more. Only firewall is Windows' Machine has been restarted. Is there anything else I should try?

  Read the article

• Windows 7 Utlimate x64 - No Internet access

  - by rafek

  I've just installed Windows 7 Ultimate x64. As all of my computers at home I've connected to my router via wifi (open/wep). And what has happened is that Wireless Connection is Connected but with No Internet access -- my ipconfig says: Autoconfiguration IPv4 Address : 169.254.33.161 Subnet Mask : 255.255.0.0 Default Gatewawy : (empty) After ipconfig /renew I get: An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. [..] I'm looking for a solution for 2 hours now...

  Read the article

• Webserver on a rotating server with NAT IP or changing IPs

  - by hpsoftware

  i would have to elaborate my questions so please have patience Explaining the logic. if you are familiar with logmein then it installs a client software on your computer then it kinda keeps tracks where you computer is as long as it's connected to internet. So you can always access your computer no matter where it is whatever it's IP is you just go to logmein.com and then you can just access it. Now what i am asking 1. Let's assume i have a website hosted on my laptop let's call it webserver. so then i move around i have a new IP sometime even on a hotel network is it possible to do something like what logmein does so i can keep moving around my Webserver to new IP but it has some local client or something which keeps updating my IP or something i am sure i would need a gateway server somewhere which is connected to my domain name via DNS so somebody accessing my website www.mywebsite.com goes to my main server then gets routed to my laptop which could be anywhere but my gateway server is able to communicate to my webserver I will keep updating the case description based on comments to make more sense. please have patience with me. Regards

  Read the article

• I accidentally hid my Gnome Panel

  - by Dean

  I got a new tablet pc, and in attempt to hide the empathy mail icon, accidentally made the entire panel dissappear. (The one at the top that has applications/places/system, and battery life/network connections etc). I don't believe I killed it, because alt+f2, then gnome-panel does not bring it back. I've tried alt+ctrl+backspace to reset gnome, that didn't bring it back. It must just be some setting like 'hide' or something... Any tips to get it back? Thanks.

  Read the article

• how to stream audio and video files, but use any media player on Windows (without using Windows file

  - by RamyenHead

  I want to access and play media files on machine S (Windows XP) from machine C (Windows XP). Using Windows File Sharing ("share this folder" stuff), if it works, I would share the folder containing media files on machine S, and I would be able to play media files, sitting in front of C, using any media player I want. Windows somehow ensures that the remote files behave like local files. But Windows file sharing won't work for me, is there any alternative? If two machines were both Linux, I would install an SSH server on S and use Nautilus from C to access and play media files. The reason why I can't use Windows file sharing is, my campus use two different subnets, I have S and C on different subnets and it seems that the firewall governing the whole network in campus doesn't allow file sharing between different subnets. I tried changing Windows Firewall settings on S to allow C in, it still wouldn't work, so it must be the other firewall.

  Read the article

• Are web application usability issues equal to website usability issues?

  - by Kor

  I've been reading two books about web usability issues and tests (Rocket Surgery Made Easy¹ and Prioritizing Web Usability²) and they claim some strategies and typical problems about website usability and how to lead them. However, I want to do a web application, and I think I lost track of what I am trying to solve. These two books claim to work with raw websites (e-commerce, business sites, even intranet), but I'm not sure if everything about web usability is applicable to web application usability. They sure talk about always having available (and usable) the Back button, to focus on short information rather than big amounts of text, etc., but they could be inaccurate in deeper problems that may be easier (or just skippable) in regular websites. Has anybody some experience in this field and could tell me if both web applications and websites share their usability issues? Thanks in advance Edit: Quoting Wikipedia, a website is a collection of related web pages containing images, videos or other digital assets, and a web application is an application that is accessed over a network such as the Internet or an intranet. To sum up, both shows/lets you search/produce information but websites are "simple" in interaction and keep the classics of websites (one-click actions) and the other one is closer to desktop applications in the meaning of their uses and ways of interaction (double click, modal windows, asynchronous calls [to keep you in the same "environment" instead of reloading it] etc.). I don't know if this clarifies the difference. Edit 2: Quoting @Victor and myself, a website is anything running in your browser, but a web application is somewhat running in your browser that could be running in your desktop, with similar behaviors and features. Gmail is a web application that could replace Outlook. GDocs could replace Office. Grooveshark could replace your music player, etc.

  Read the article

< Previous Page | 559 560 561 562 563 564 565 566 567 568 569 570  | Next Page >