Search Results

Search found 19539 results on 782 pages for 'pretty print'.

Page 565/782 | < Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >

• ipmi - can't ping or remotely connect

  - by Fidel

  I've tried configuring the IPMI controller to accept remote connections, but I can't even ping it. Here is it status: #/usr/local/bin/ipmitool lan print 2 Set in Progress : Set Complete Auth Type Support : NONE PASSWORD Auth Type Enable : Callback : : User : NONE PASSWORD : Operator : PASSWORD : Admin : PASSWORD : OEM : IP Address Source : Static Address IP Address : 192.168.1.112 Subnet Mask : 255.255.255.0 MAC Address : 00:a0:a5:67:45:25 IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Enabled Gratituous ARP Intrvl : 8.0 seconds Default Gateway IP : 192.168.1.1 Default Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3 Cipher Suite Priv Max : uaaaXXXXXXXXXXX : X=Cipher Suite Unused : c=CALLBACK : u=USER : o=OPERATOR : a=ADMIN : O=OEM # /usr/local/bin/ipmitool user list 2 ID Name Enabled Callin Link Auth IPMI Msg Channel Priv Limit 1 true false true true USER 2 admin true false true true ADMINISTRATOR # /usr/local/bin/ipmitool channel getaccess 2 2 Maximum User IDs : 5 Enabled User IDs : 2 User ID : 2 User Name : admin Fixed Name : No Access Available : callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR # /usr/local/bin/ipmitool channel info 2 Channel 0x2 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : disabled User Level Auth : disabled Access Mode : always available # /usr/local/bin/ipmitool chassis status System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : unknown Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false # arp Address HWtype HWaddress Flags Mask Iface 192.168.1.112 ether 00:A0:A5:67:45:25 C bond0 # /usr/local/bin/ipmitool -I lan -H 192.168.1.112 -U admin -P admin chassis power status Error: Unable to establish LAN session Unable to get Chassis Power Status In summary. It exists on the ARP list so arp's are being broadcast. I can't ping it and can't connect to it. Can anyone spot any glaring mistakes in the configuration? Many thanks, Fidel

  Read the article

• ospfd over an OpenVPN link - strange error in logs

  - by Alex

  I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

  Read the article

• There's no sound on Ubuntu with an Intel HDA onboard chip and Realtek ALC1200 codec.

  - by Hanno Fietz

  For a while now, my sound has not been working in Ubuntu. It used to play OK, but after some upgrade (might have been distro upgrade to 9.10), it stopped working. I'm currently running 10.04 on an amd64 architecture. I'm using the builtin audio on a Foxconn motherboard, it's an ATI / Intel HDA chip with an Azalia controller, apparently it's using the Realtek ALC1200 codec. All the gory details here. I found a nice sound troubleshooting tutorial here, which is well-written and pretty extensive, however, I fail to look up the supported "models" for my soundcard. The troubleshooting page says to look for a section giving the codec used by your soundcard, which looks like this for me: !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Realtek ALC1200 Then, I'm supposed to lookup the models for that codec in the file Documentation/ALSA-Configuration.txt in the appropriate directory of ALSA's git repository. Mine actually pointed me to a separate file, Documentation/HD-Audio-Models.txt, which, for my driver version is located here and contains no section related to ALC1200 codecs. I tried putting the driver options probe-mask=1 and model=auto in a config file for modprobe, as suggested elsewhere, but this just lead to snd-hda-intel not able to load at all anymore. I also tried installing the linux-backports-modules-alsa package for my kernel, because the description sounded promising, but that didn't change anything, either.

  Read the article

• Mac OS X - configuring ntpd server with on LAN with D-Link DIR-655

  - by Mark C

  Hey all, This question is pretty specific, but I hope someone will have seen this error elsewhere. I a configuring a machine running OS X 10.5.8 to be an NTP server for machines connected to a LAN that is not connected to the Internet. I am not too worried about knowing the "right" time on all the machines, but rather worried about making sure everyone has the same notion of time. I configured the NTP daemon on Mac by turning on the Set date and time automatically in System Preferences, using the server's clock, 127.127.1.0 as the reference clock. I figured I should see if the server can NTP query itself before proceeding to the clients. The weird part is when I run the ntpq -p command in a command-prompt when connected to my D-Link DIR-655 (firmware: 1.33), it hangs for about a minute or so each time before finally giving me some output. I thought the problem might have to do with Port Forwarding, so I configured the router to forward port 123 for the IP of the server, but that did not improve the situation. When I run the ntpq -p command on my school's network, on a Linksys WRT54G router, or with the wireless Airport card turned off - I have absolutely no problems - the command returns a response instantly. Is this normal? I can see why a query might take a minute or so, but I don't understand why one router does it faster than the other. I tried messing around with the ntp.conf file adding the burst, minpoll, and maxpoll options: server 127.127.1.0 burst minpoll 4 maxpoll 5 Figuring that perhaps I am polling too often and the configuration file is slowing me down, but even with this, the ntpq still hangs on the D-Link DIR-655, but does just fine on the other routers. Any thoughts on where the lag is coming from or if the lag is even a problem?

  Read the article

• Free/opensource application for charting stock prices?

  - by Homunculus Reticulli

  I am looking for a free or FOSS software application for SIMPLY charting stock prices. I am not interested in any of the other nonsense typically bundled with such packages (technical analysis, back testing, tracking etc, etc). All I want to do is the following: Import file from CSV and plot on the chart Ability to scroll the chart left/right (zoom feature would be nice to) Ability to draw straight line (between 2 points) on the plot Ability to plot the graph for different resolutions (for e.g weekly, monthly - or some other custom resolution that I want) print the displayed graph (I can always use screen capture if printing is too much to ask) Thats all I want to do. I am not interested in anything else. I would have thought I could have found something by now. I would have written my own tool (I still will do that at a later stage), but I am a bit short of time at the moment, so I just want something that will do all of the above. Can anyone recommend a package. Last but not the least, I am running on Linux (and would prefer to do so - BUT if I have to, I can run on ahem - you know, Windows)

  Read the article

• Finding ALL currently used IP addresses of Website

  - by Patrick R

  What steps would you take to discover all (or close to all) IP addresses that are currently used by a website? How would you be as exhaustive as possible without calling a website admin and asking for the list of IP addresses? ;) nslookup works but will vary based on dns server queried. whois is another good tool. Dig, not bad. Let's use Facebook for example. I'm blocking that site for the majority our our company's users, but some are approved for "research". I can not easily use OpenDNS because we all appear to come from the same request IP address. I could change that but don't want to add more vlans than I already have. I also could use block something like regex facebook1 "facebook\.com" (I'm running a cisco firewall) but that's pretty easy to sidestep. All that being said, I'm asking about specifically about finding ip addresses for a domain and not for other methods that I can block a domain name.

  Read the article

• Using public interfaces on a server connected through a GRE tunnel

  - by Evan

  I'm pretty new to networking so please forgive any terminology mistakes. I have 2 servers connected with a GRE tunnel. Server1 (10.0.0.1) ---- Server2 (10.0.0.2) I want to be able to bind to the public IPs on Server2 using Server1. To do this, I setup virtual interfaces with Server2's public IPs on Server1 and then used routing rules on Server1 to route the packets through the GRE tunnel. On Server1: ip rule add from [Server2's first public IP] table gre ip rule add from [Server2's second public IP] table gre ip route add default via 10.0.0.2 dev gre1 table gre This works great and I can see the packets arriving via GRE on Server2. I can see the packet exiting the tunnel on Server2's gre1 device as shown: From Server1: ping -I [Server2's public ip] google.com tcpdump from Server2's GRE tunnel device: 12:07:17.029160 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) [Server2's public ip] > 74.125.225.38: ICMP echo request, id 6378, seq 50, length 64 This is exactly the packet I want. However, I'm not seeing it go out at all on eth0:0 (where Server2's public IP is bound to). I've tried to use routing rules to get packets coming from Server2's public IP (which would be coming out of dev gre1) to go through dev eth0 on the public default gateway and that doesn't work either. I'm at a loss, thank you to anyone who can help.

  Read the article

• localhost/127.0.0.1 not working, "Unable to connect"

  - by redconservatory

  I am running some pretty basic php sites on Snow Leopard. Usually I just go to my browser and type anything like: localhost http://localhost 127.0.0.1 mycomputername.local But suddenly, after installing a gem file (compass) none of this is working. I tried sudo apachectl restart Thinking that I just needed to restart apache, but no luck. My error log looks like: [Mon Mar 26 09:39:08 2012] [warn] child process 45443 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45223 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45043 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45438 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45049 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45439 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45224 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45440 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45441 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45442 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:10 2012] [warn] child process 45443 still did not exit, sending a SIGTERM [Mon Mar 26 09:39:11 2012] [notice] caught SIGTERM, shutting down I also tried sudo apachectl -k start And I got the error: Syntax error on line 182 of /private/etc/apache2/httpd.conf: Illegal option When I look at the code around that line, I see: <Directory /> Options Indexes MultiViews + FollowSymLinks AllowOverride All Order allow, deny Allow from all </Directory>

  Read the article

• How to route public static IP to a virtual machine on a vmware ESXi host?

  - by Kevin Southworth

  I have 5 static IPs from my ISP (Comcast) and I have a physical machine with VMware ESXi 4.0 on it that is hosting multiple virtual machines. Right now I am just using the default vmware virtual network (vswitch0) with DHCP from the Comcast IP Gateway Router and everything is working fine. Each virtual machine can access the internet, etc. One of my virtual machines is a webserver (Windows Server 2008) and I want to assign it to 1 of my 5 static IPs so it's accessible from the public internet, while leaving the other VMs on the internal LAN still using DHCP. If I just plug my laptop directly into the Comcast IP Gateway (it has 4 ports on the back) and assign my laptop a Static IP using the windows networking dialogs, then I can hit my laptop from the public internet and it works great. However, if I try to do the same steps to set a static IP config on my Windows Server 2008 VM, it does not work. The VM cannot access the internet (open Firefox and try to visit google.com), and I cannnot see the VM from the public internet either. I'm assuming I'm missing something in the ESXi config somewhere, but I'm pretty new to ESXi and I'm not sure how to configure it to work this way.

  Read the article

• 403 Forbidden error on Mac OSX - Apache and nginx

  - by tlianza

  Hi All, There are a million questions like this on Google, but I haven't found a solution to my problem. The default Apache install on my Mac is giving 403 Forbidden errors for everything (default directory, user home directory, virtual server, etc). After sifting through the config files, I figured I'd give nginx a try. Nginx serves files fine from it's home directory, but it won't serve files from a subfolder of my user directory. I've configured a simple virtual host, and requesting index.html returns a 403-forbidden. The error message in nginx's log file is pretty clear - it can't read the file: 2011/01/04 16:13:54 [error] 96440#0: *11 open() "/Users/me/Documents/workspace/mobile/index.html" failed (13: Permission denied), client: 127.0.0.1, server: local.test.com, request: "GET /index.html HTTP/1.1", host: "local.test.com" I've opened up this directory to everyone: drwxrwxrwx 6 me admin 204B Dec 31 20:49 mobile And all the files in it: $ ls -lah mobile/ total 24 drwxrwxrwx 6 me admin 204B Dec 31 20:49 . drwxr-xr-x 71 me me 2.4K Dec 31 20:41 .. -rw-r--r--@ 1 me me 6.0K Jan 2 18:58 .DS_Store -rwxrwxrwx 1 me admin 2.1K Jan 4 14:22 index.html drwxrwxrwx 5 me admin 170B Dec 31 20:45 nbproject drwxrwxrwx 5 me admin 170B Jan 2 18:58 script And yet, I cannot figure out why the nginx process cannot read index.html. It's running as the "nobody" user, but the permissions are set such that anyone can read them.

  Read the article

• Windows XP over two monitors, but one of them switches off at boot... how to fix? How to switch bac

  - by jae

  When booting into XP (x64, Athlon II X2 245, 4GB RAM), my main monitor (got two 19" TFTs hooked up, two gfx cards, a 4650 (1GB, the primary monitor's on this) and a 4350 (512MB)) switches off. Logging in blind (cursor down key, typing password) gets me one screen, the secondary. Booted correctly until about two days ago. No clue what's the cause, last change was (if I don't overlook something) installing the ATI 9-12 hotfix. And booting into Windows 7, after returning from 7, it was like this. For some weird reason, I cannot start Catalyst Control Center (I right-click desktop, choose the CCC entry, the pointer changes to hourglass for a half-second... and nothing. Likewise with "Properties"... I think, as all windows open on the primary (off) screen, and no entry appears in the task bar for Properties) Completely stumped. Windows 7, same setup, works w/o a hitch. The primary monitor appears to run in some unknown, but pretty low, resolution, as the mouse pointer only moves onto it at about half-height. But, w/o CCC or display properties, I cannot check. And, obviously, not change anything. Hope this was not too long-winded. And I'm sure I still forgot essential stuff. :P

  Read the article

• Using gentoo, how does one stick -9999 ebuild to a specific svn revision?

  - by hurikhan77

  As an example given the django-9999 ebuild, to match the developers environment I need to checkout R12120 from trunk. Installing Django manually is not option due to package management reasons. But there is also no ebuild in portage for 1.2 beta versions. So I did the following: ESVN_OPTIONS="-r12120" emerge -1a django Which installed the required revision from svn. But this is cumbersome in a way. Is there some way to define this statically per ebuild, eg something like: DJANGO_SVN_REV="12120" in make.conf. This would be much cleaner in my eyes. Because next time I need to rebuild django for whatever reason, I need to remember: "Oh I wanted this to stick to a specific revision" and next question will be "err, f&!#$?%, what was it again?" What's the best way to go here? Keep in mind: Manually installing packages without package manager knowledge is no option Working around with manual emerge variable prefixing is no option Setting up a /etc/portage/package.env would be a way to go (as described here) but that seems pretty unsupported and kludgy to me and thus unpreferable Modifying make.conf would be a way to go Keeping the ebuild in an overlay would be an option

  Read the article

• Epson Artisan 800 on Ubuntu/Linux

  - by Tim Lytle

  Update for Ubuntu 10.04: Printing should work 'out-of-box', scanning still needs the newer sane backend. Looking for a known good way to setup an Epson Artisan 800 on Ubuntu specifically or any linux box in general. It is a printer/scanner with ethernet/wifi/usb. I'd like to use it as a network printer/scanner being able to do both from my Windows and Ubuntu machines; however, if it needs to be physically connected to a computer (preferably the Ubuntu machine) that is doable (again, then sharing print/scan functions to the network). Basically, I'm looking for someone who has used this printer/scanner (or similar) in a multi-platform environment to share how the set it up and how well it worked. Updated: A little more information, like most printers (I expect) the documentation for the printer basically says, "don't use plug-n-play, run our setup CD from your Windows/Mac system", to do anything (set it up for network use even). I guess that's to make it easy for anyone else to setup, but when you're looking to use it with an unsupported (by Epson's documentation) OS, you're just stuck on your own. What I was hoping for was someone who could say, "Forget the bundled software, do [this] to set it up on wifi manually, install [this] to connect to the scanner from [os], printing works with [this] driver - at least that's how I set it up." I'll will (and have so far) use the information here, and post my own setup when I'm done, if there's no one else out there with that experience.

  Read the article

• How to work around blocked outbound hkp port for apt keys

  - by kief_morris

  I'm using Ubuntu 9.10, and need to add some apt repositories. Unfortunately, I get messages like this when running sudo apt-get update: W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9BF3BB4E5E17B5 W: GPG error: http://ppa.launchpad.net karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1DABDBB4CEC06767 So, I need to install the keys for these repositories. Under 9.10 we now have the option to do this: sudo add-apt-repository ppa:nvidia-vdpau/ppa See this Ubuntu help article for details. This is great, except that I'm running this on a workstation behind a firewall which blocks outbound connections to pretty much all ports except those required by secretaries running Windows and IE. The port in question here is the hkp service, port 11371. There appear to be ways to manually download keys and install them on apt's keyring. There may even be a way to use add-apt-repository or wget or something to download a key from an alternative server making it available on port 80. However, I haven't yet found a concise set of steps for doing so. What I'm looking for is: How to find a public key for an apt-package (recommendations for resources which have these, and/or tips for searching. Searching for the key hash doesn't seem all that effective so far.) How to retrieve a key (can it be done automatically using gpg or add-apt-repository?) How to add a key to apt's keyring Thanks in advance.

  Read the article

• How can I set the CD audio volume in Linux?

  - by user1296362

  In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

  Read the article

• How to access Windows Server 2008 R2 file shares from a different subnet

  - by Lloyd Cotten

  We have a couple of severs that used to be Windows Server 2003 that we recently upgraded to Windows Server 2008 R2. A couple of details to set the situation up: We wiped the OS and re-installed. These servers are on one subnet (172.16.x.x) and we are trying to access some file shares on them from another subnet (10.34.x.x). Firewall is disabled on these servers. Trying to access with UNC "\172.16.x.x\sharename" and net use \172.16.x.x However, we're having problems doing this. We are getting "The network path was not found". Here's some of the things we've tried so far and the result: Tried accessing the share from other (non-2008) servers on the same subnet... Success! Ping servers from different subnet... Success! Telnet connection into port 139 from different subnet... Success! Took a scan through Local Security Policies to see if something obvious needed to be enabled / disabled / configured... Fail I'm not sure where to look next. I know that the router between the two subnets is locked down pretty good, but this did work for our 2003 servers. Has anything changed in the way of ports used for UNC / file share access in 2008? Maybe I'm missing some security policy setting? Hoping somebody can take pity on a poor programming guy that can't figure out something really simple. :-) Thanks!

  Read the article

• DAS vs SAN storage for serving 2 to 4 nodes

  - by Luke404

  We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

  Read the article

• php_ibm_db2.dll on IIS 7.5 using PHP 5.3 error message

  - by grmbl

  I'm trying to use ibm_db2 extension to access iSeries DB2 database. This is the testcode (taken from here) <?php $database = 'ALI452BFAL'; //library $user = 'STN452'; $password = '**********'; $hostname = 'myserverip'; $port = 50000; $conn_string = "DRIVER={IBM DB2 ODBC DRIVER};DATABASE=$database;" . "HOSTNAME=$hostname;PORT=$port;PROTOCOL=TCPIP;UID=$user;PWD=$password;"; $conn = db2_connect($conn_string, '', ''); if ($conn) { print "ok"; db2_close($conn); } else { echo db2_conn_error() . '<br>' . db2_conn_errormsg(); } ?> I have installed a very basic package containing the db2 driver and added this as an extension. (IBM Data Server Driver for ODBC, CLI, and .NET.msi) This is my result: 08001 [IBM][CLI Driver] SQL30081N A communication error has been detected. Communication protocol being used: "TCP/IP". Communication API being used: "SOCKETS". Location where the error was detected: "10.10.0.120". Communication function detecting the error: "connect". Protocol specific error code(s): "10061", "", "". SQLSTATE=08001 SQLCODE=-30081 Anybody tried this before??

  Read the article

• Hiding subfolders from users with Windows Server security

  - by Frans

  Using Windows Server 2008. I would like to allow all users to map to a common network drive and be able to browse it. But, I only want them to be able to see the subfolders they actually have access rights to. Is this doable? Example I have a share with two folders on it; \\domain\share\FolderA \\domain\share\FolderB With three different security groups, I would like to map a network drive for all three to \\domain\share. However, for group1, I want them to only be able to see FolderA, group2 should only see FolderB and group3 should see both. I am not just talking about denying access to the actual folder, which is easy enough, I don't want the user to even be able to see that the folder exists. In other words, when group 1 logs in and do "dir n:\" they should see N:\FolderA When group 2 logs in, they should see N:\FolderB and when group 3 logs in they should see N:\Folder A N:\Folder B My half-baked solution If I completely block access to the root then I can't map a drive to it. I can give everyone the traverse right which then allows the user to map a drive. However, if a member of group1 or group2 tries to go to "N:\" they get an access denied error. If they go to N:\FolderA (for group1) then it works. So, that sort of works, but it would be nicer if the user could actually browse to N:\ and just only see the subfolders they have access to. I am pretty sure I have seen this done but not sure how to do it myself. Any advice would be greatly appreciated.

  Read the article

• How do I restrict the Open/Save dialog in Windows to one folder?

  - by MindModel

  I spend a significant amount of time helping non-techies use their PC's. I realized most of that time is spent trying to explain to them how the Windows folder hierarchy works, where the "open file" dialog is pointing now, and how to find that Word document they saved. All this time, they're telling me they "just want to print the file". They refuse to learn how to read the PC screen, try to memorize a fixed set of steps, and end up calling me back to tell me their files disappeared again. I realize it's not productive to try to restrict where PC apps (e.g. Quicken) store files. But if there was a Windows utility I could turn on or off that would restrict the Open/Save dialogs in Windows apps, my noob user friends and I would save an enormous amount of time. The goal would be to have all files whose locations are chosen by the Save dialog saved to one folder, and have the Open dialog always point to that folder, until the utility is turned off. Does such a Windows utility exist?

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• Exchange MSExchangeIS Mailbox Store Error

  - by Bart Silverstrim

  Boss asked me to check to see if I could figure out why he's had to restart the services on the Exchange server three mornings in a row now. While going through the system logs I ran across an error from the MSExchangeIs Mailbox Store, category General, Event 9690. The message said (edited to make generalized): Exchange store 'First Storage Group\Mailbox Store (Servername)': The logical size of this database (the logical size equals the physical size of the .edb file and the .stm file minus the logical free space in each) is 22GB. This database size has exceeded the size limit of 22 GB. This database will be dismounted immediately. Hmm...happened at five in the morning, and I'm thinking this is a pretty good hint that this leads to the culprit. Thing is I'm not an Exchange expert, so I'm still googling around to figure out how to fix the problem. Any better guidance out there? Or am I barking up the wrong binary tree? Exchange System Manager reports that the server is "version 6.5 build 7638.2, SP2", standard, which I believe is Exchange 2003. It's running on Windows Server 2003 R2 Standard, SP2.

  Read the article

• APC uptime 0 because of Fast

  - by demlasjr

  I have a VPS using Parallels/Plesk (11.0.9 Update #22, last updated at Oct 31, 2012 03:33 AM CentOS 6.3 (Final) x86_64) I have apache (CGI/FastCGI) installed and nginx as reverse proxy. Everything is working just fine. I installed APC for caching, but the issue is that the uptime is 0 always. It's restarting each 15 seconds or so. I checked everywhere and can't find a solution to fix it. The server have the grace restart enabled, but every 6 hours, which shouldn't influence the APC uptime. Searching in Google I found that this could be related to Apache, running with FCGId instead of FastCGI. Plesk/Apache is using this config file: usr/local/psa/admin/conf/templates/default/service/php_over_fastcgi.php which content is: <IfModule mod_fcgid.c> <Files ~ (\.php)> SetHandler fcgid-script FCGIWrapper <?php echo $VAR->server->webserver->apache->phpCgiBin ?> .p$ Options +ExecCGI allow from all </Files> Is here the issue or elsewhere ? How can I fix this to work with FastCGI and make APC working properly. I forgot to specify that even if the uptime is below one minute, APC is doing pretty good job caching (92% are hits).

  Read the article

• How would I force Debian to use the physical sector size on a hard disk?

  - by Confused User

  I just purchased a few new 3TB WD drives. These have physical 4k sectors, but there is some sort of layer which is providing 512B logical sectors (see the partition table below). In order to attempt to get some more speed out of my hard drives, I would like to get rid of this logical layer and actually use the physical 4k sectors. However, I can't figure out how to do this (or even if it's possible) from the man pages of fdisk and parted, or from searching Google. Does anybody know how this could be done? As to why this is relevant, this page demonstrates that meerly aligning the sectors properly can already make up to a 25% speed difference for reads, and more than 2500% for writes in some cases! Getting rid of the logical sectors in favor of the physicals ones should improve speeds even more. Thanks! $ parted /dev/sdc GNU Parted 2.3 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA WDC WD30EZRX-00M (scsi) Disk /dev/sdc: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 3001GB 3001GB zfs 9 3001GB 3001GB 8389kB P.S. I don't care about the data on the drives, I was just playing with different file systems. Also, this is my first time posting here, so please let me know if my posts should be formatted differently, etc.

  Read the article

• Choosing the right e-mail client

  - by CFP

  Hi all, I'm currently using Outlook 2007 (under windows 7), but I much prefer free software (open source being the best of course), so I thought I'd ask for expert advice here. I thought it might be easier if I included a small "wanted list": I receive about 15 to 30 e-mails every day, but I have large archives (10'000 emails), which I frequently need to access. I usually open and close my mail program many times, so I'd like it to start pretty fast I cannot use an online mailbox, because I have too many email addresses (about 5: 1 for work, 1 for home, 1 semi-private, 1 for specific emails, and 1 for newletters By order of importance, the things I'd like my mail client to be able to: Efficiently categorize e-mails. Until now, I've mostly been using Outlook folders, because filtering by tags was not easy, but I'd rather one large list of mails, neatly tagged so I can easily filter. I'd love being able to select mails by tags (eg in a click or too (could be a tab) show all mails tagged with "software") Create "tagging rules", such as "if the mail was sent to this address, add this tag", or "if the body contains ..., add that tag" Sync contacts with Gmail, handle tasks (syncing with toodledo would be awesome), possibly provide a calendar Create e-mail templates, signatures... Other ideas: A timeline, scripting support, being able to import MS Outlook emails, provide a nice backup format... Thanks for sharing ideas and suggestions!

  Read the article

< Previous Page | 561 562 563 564 565 566 567 568 569 570 571 572  | Next Page >