Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 566/1008 | < Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >

• aplay -l says no soundcards found; alsaconf says no supported cords; yet /proc/asound contains cards

  - by nimasmi

  I am trying to get HDMI output using a Gainward Nvidia 210 512 MB on Ubuntu 10.04 Lucid Lynx. I have upgraded alsa-driver, alsa-lib and alsa-utils to 1.0.24 by building from source, thanks to this blog post. Some relevant output... user@box:~$ lspci | grep Audio 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 01:09.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder (rev 05) 01:09.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05) 01:09.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [IR Port] (rev 05) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) user@box:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. Compiled on Sep 15 2012 for kernel 2.6.32-42-generic (SMP). user@box:~$ ls /proc/asound` card0 cards hwdep NVidia oss seq version card1 devices modules NVidia_1 pcm timers user@box:~$ aplay -l aplay: device_list:240: no soundcards found... user@box:~$ sudo /sbin/alsa-utils start * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1403: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... amixer: Invalid command! ...done. Any help appreciated. PS my video card is connected only through the PCI-E slot. I assume there is no extra audio connection required.

  Read the article

• How to hide keyboard layout shortcut from Unity top panel?

  - by user67715

  I'm using Ubuntu 12.04 together with X Neural Switcher, which is a program for the automatic switching of the keyboard layout. The switcher goes with a GUI called gXNeur. The GUI places an applet icon to the Unity top panel (the gXNeur had to be whitelisted for the icon to become visible) that help a lot to configure and make urgent changes in the rules that the program uses. But after the icon is whitelisted I'm having two keyboard layout indicators in the panel (one - native, the second one - gXNeur). The native is the one I'd like to hide while gxNeur is more intuitive. Is there a way to do that? Thanks a lot for your help!

  Read the article

• How do I fix my ethernet card losing network connection every few minutes with kernels 3.8.x?

  - by igoryonya

  I'm using Ubuntu 13.04. My laptop is Acer Aspire one 722-c58rr, and my ethernet card works for a few seconds at a time with kernels 3.8.x, however, kernels 3.5.x and below worked fine. On kernels 3.8.x, it works fine after boot for about a minute, then it looses network connection. When pinging to some address, it says: network address is unreachable, but it can ping it's own address. The address is statically configured. Everything was working fine before. I went to vacation, where I used WiFi and 3G connections, so I didn't notice that the problem occurred. Came back home, plugged in into the ethernet. It worked for a minute then stopped. Rebooting commutator fixed the problem. Tried to connect to a different commutator, same problem. Unplugging and plugging the cable fixes the problem for another minute. Disconnecting eth in Network manager and reconnecting it again, does the same thing. WiFi has no such problem. Tried to use a different cable that works fine on another computer, the same problem. Tried to boot with the lower kernel version, the same problem was happening until I got to the version 3.5 of the kernel series. Everything works fine on the kernel 3.5.x, but I don't want to miss out on the new kernel's features. Executing commands, when booted with 3.8 kernel series, give the following results: lspci| grep -i eth: 06:00.0 Ethernet controller: Qualcomm Atheros AR8152 v2.0 Fast Ethernet (rev c1) dmesg| grep eth1: [ 89.548291] atl1c 0000:06:00.0: atl1c: eth1 NIC Link is Up How do I fix it, while staying in the new kernel version?

  Read the article

• Getting a 404 when using the Nexus 7 installer PPA, how do I fix this? [duplicate]

  - by Vitaliy

  This question already has an answer here: How can I fix a 404 Error when using a PPA? 2 answers ubuntu 13.10 sudo add-apt-repository ppa:ubuntu-nexus7/ubuntu-nexus7-installer OK sudo apt-get update: W: ?? ??????? ???????? http://ppa.launchpad.net/ubuntu-nexus7/ubuntu-nexus7-installer/ubuntu/dists/saucy/main/binary-amd64/Packages 404 Not Found W: ?? ??????? ???????? http://ppa.launchpad.net/ubuntu-nexus7/ubuntu-nexus7-installer/ubuntu/dists/saucy/main/binary-i386/Packages 404 Not Found Thanks for the answer

  Read the article

• 3G Huawei E220 cannot connect to the Net Ubuntu 12.04

  - by user60786

  I've upgraded from 10.10 to 12.04. The situation: I plug the dongle in and enter the password. If I click 'Enable Mobile Broadband' and I get a notice on the top right saying 'GSM network. You are now registered on the home network'. At this stage I have not actually connected and when I click my broadband connection i see that 'Enable Mobile Boardband' is unticked AGAIN and I cannot connect to my broadbnad connection when I click it.

  Read the article

• Ambiance GTK theme customisation *just* for one user

  - by Robottinosino

  Is it possible to customise the appearance of the Ambiance theme just for one user? I have read about the possibility of doing this: sudo vim /usr/share/themes/Ambiance/gtk-2.0/gtkrc but could something be done to change: just one setting for just one user? Perhaps changing something in the user's .themes directory? Notice: I would prefer not to copy the full theme to the user directory, just to provide an override mechanism after the "global" theme is applied, independently from the theme if possible, but anyway just specifying what needs to be different, not duplicating the whole theme definition.

  Read the article

• menu not showing in apps when maximized 12.10

  - by chazdg

  I have removed the Global App Menu as I prefer to have the minimize, maximize, close buttons on the right side of each app. I did this with no problem in 12.04. I did an upgrade to 12.10 and noticed that Chrome, Chromium and Firefox all use the Global Menu. I have done the following: sudo apt-get autoremove appmenu-gtk appmenu-gtk3 appmenu-qt I have disabled the Firefox extension. I removed the corresponding Firefox package but still only have a global menu. I tried Gconf but apparently that does not work in 12.10. I then tried Dconf and found this fix on Google: org gnome desktop wm preferences, look for "button_layout" on the right panel. Here is the problem, after desktop, I do not have wm. I reset Unity and got a message saying something about wm is missing. I rebooted and opened Chrome and still no fix. I then clicked maximize and once Chrome was not maximized anymore, the minimize, maximize, close buttons show up in Chrome. Same with Firefox! Any ideas? I am truly stumped. Firefox and Chrome work fine in KDE Plasma and Gnome when maximized.

  Read the article

• ubuntu 12.04 LTS no sound

  - by harlie

  I just reinstalled ubuntu 12.04 from a DVD that came in the Ubuntu User magazine. I previously had 13.04 but had decided to revert back to the LTS. Now with 12.04 I have no sound when I try to play my music, I tried using Musique and also Rhythm Box they both show playing with the slider but no sound is heard except if the volume is all the way up you can hear a faint hiss or static. Any advice on how to fix this? Thanks Harlie

  Read the article

• Where can I get fresh new Wine DLLs?

  - by SuperScript

  I was acting careless today and I accidentally deleted one of the .dlls in my Ubuntu Wine installation, ~/.wine/drive_c/windows/system32/ole32.dll to be exact, and need a new fresh copy of only this one .dll. I know that reinstalling will fix it, but I have installed quite a few programs and do not want to have to do such a drastic thing just to fix this one problem. So, I'm wondering if there is somewhere that I can download this original .dll as it came with my original Wine installation. I have found the SourceForge repository, but it only has .h and .c files and I do not know how to build them into a .dll. Can anyone give me a link to download, or instructions to build my missing .dlls?

  Read the article

• Make sudoers work with only certain parameter?

  - by Evan

  I'm trying to make my sudoers file allow a user to adjust the backlight without having to enter in the password. This is what I have: # User alias specification Cmnd_Alias ADJBL = /usr/bin/su -c "echo 150 >/sys/class/backlight/intel_backlight/brightness" # For our user.. ouruser HOME=(root) NOPASSWD:ADJBL .. but it doesn't seem to be working, I still get prompted for the password when I try and run that command with sudo. Apparently there is something I'm missing here, any ideas?

  Read the article

• Unstable wireless connection on Ubuntu only (router config problem?)

  - by crunch

  so I'm using Ubuntu 14.04 and I could connect to all Wi-Fi's that I've tried and it worked fine... Except for this router that I have at home. This connection seems to be unstable, it just randomly disconnects and reconnects. On the same machine I have Ubuntu 13.10 (same problem) and Windows 8 (no problem). Also there are no Wi-Fi problems when I connect with my Android phone. So I figured it must be some config issue. I tried tweaking some settings/restoring default on the router but I don't really know what I'm doing so, unsurprisingly, it didn't fix the problem.

  Read the article

• How do I use Scale for Application-only windows?

  - by AeroCross

  If I have 3 windows opened in the same application (e.g Google Chrome) I get this in the Unity Bar: OK, that's good and expected. If I click that, it will Scale the windows that belong to that application, like this: Great! That's what I want to achieve more often by using hot corners. I did that with TopLeft and Scale All Windows, like this: How can I achieve the scale of only the application windows (like Chrome) with a hot corner (like TopRight)? I've already tried "Initiate Window Picker for Window Group" but it doesn't work. Am I missing something? Using Ubuntu 12.04 and the Scale / Scale Addons plugins.

  Read the article

• Large uploaded file won't display in Ubuntu One but is included in file usage

  - by user1488963

  On Ubuntu 10.04, I uploaded a single 711 MB. My total file usage in Ubuntu One went up to 877MB, which is about right, but the file doesn't show in Ubuntu One so I can't download or delete it. Either the file is there and I can't see it for some reason. Or the file is not there and the total file usage figure is wrong. Does anyone know what has happened? I have a free account but am well below my 5GB limit.

  Read the article

• How to Edit PDFs?

  - by snowguy

  I typically have two needs: Scenario A. Change a single PDF page. In this case I have a PDF but not the original source file used to create the PDF. I don't want to try to recreate the document from scratch. I'd like to open the PDF and change a few things. A good example of this scenario: I was responsible for planning a big event at a campground site, I had a PDF of the site. I wanted to start with that document, highlight some parts, add some labels, remove some parts that weren't relevant. or Scenario B. Combine PDFs or extract information from a PDF This scenario usually arises because I want a single PDF deliverable that is made up of parts that are best created in different programs. In this case I have the source files for all the documents but they don't play well enough together to easily create a single PDF deliverable. For part of it, I may want to use Libre Office Writer. For another page I may want to use Gimp. Still another page I may use Libre Office Calc. I could use Writer as the master document and embed images or the Calc object into that, but for ultimate control, you can't beat separate PDF documents that are then combined. What are the best tools / processes for editing PDFs in Ubuntu?

  Read the article

• external hard drive not detected after ubuntu crash [restarting machine]

  - by Netmoon

  today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

  Read the article

• Using pkexec policy to run out of /opt/

  - by liberavia

  I still try to make it possible to run my app with root priveleges. Therefore I created two policies to run the application via pkexec (one for /usr/bin and one for /opt/extras... ) and added them to the setup.py: data_files=[('/usr/share/polkit-1/actions', ['data/com.ubuntu.pkexec.armorforge.policy']), ('/usr/share/polkit-1/actions', ['data/com.ubuntu.extras.pkexec.armorforge.policy']), ('/usr/bin/', ['data/armorforge-pkexec'])] ) additionally I added a startscript which uses pkexec for starting the application. It distinguishes between the two places and is used in the Exec-Statement of the desktopfile: #!/bin/sh if [ -f /opt/extras.ubuntu.com/armorforge/bin/armorforge ]; then pkexec "/opt/extras.ubuntu.com/armorforge/bin/armorforge" "$@" else pkexec `which armorforge` "$@" fi If I simply do a quickly package everything will work right. But if I package with extras option: quickly package --extras the Exec-statement will be exchanged. Even if I try to simulate the pkexec call via armorforge-pkexec It will aks for a password and then returns this: andre@andre-desktop:~/Entwicklung/Ubuntu/armorforge$ armorforge-pkexec (armorforge:10108): GLib-GIO-ERROR **: Settings schema 'org.gnome.desktop.interface' is not installed Trace/breakpoint trap (core dumped) So ok, I could not trick the opt-thing. How can I make sure, that my Application will run with root priveleges out of opt. I copied the way of using pkexec from synaptic. My application is for communicating with apparmor which currently has no dbus interface. Else I need to write into /etc/apparmor.d-folder. How should I deal with the opt-build which, as far as I understand, is required to submit my application to the ubuntu software center. Thanks for any hints and/or links :-)

  Read the article

• What is the difference between the "Entire Partition" and "Entire Disc"?

  - by Roman

  I want to install Ubuntu alongside my Windows 7 operation system. During installation I have three options: Install alongside the existing OS. Remove everything and install Ubuntu. Manual partitioning (advanced). The above list is not precise (I do not remember what exactly was written there and I just write options as I have understood them). I know that option 2 is not mine. So, I need to choose either 1 or 3. I do not know which one I need to choose. I want to have a possibility to manually specify space assigned to Windows and Ubuntu (for example 40% for Windows and 60% for Ubuntu). I chose the 1st option and I saw a window with the following information. Allocate drive space by dragging the drive bellow. File (48.1 GB) Ubuntu /dev/sda2 (ntfs) /dev/sda3 (ext4) 286.6 GB 241.7 GB 2 small partitions are hidden, use the advanced partitioning tool for more control. [use entire partition] [use entire disk] [Quit] [Back] [Install Now] My problem is that I do not understand what I see. In particular I can press [use entire partition] or [use entire disk] and I do not know what is the difference. Moreover, as far as I understand, I can even press [Install Now] without pressing one of the two above mentioned buttons. So, I have 3 options. What is the difference between them? The most important thing for me is not to delete the old operation system with all the data stored there.

  Read the article

• Best virtualization solution for running Windows 7 as a guest?

  - by gkt.pro

  I depend upon Ubuntu for most of my work but I still need Windows 7 for some applications such as Office 2010 Casual Gaming Adobe CS4 and other windows softwares that are not available on Ubuntu yet. I checked Wine but as of now it provides no support for Office 2010 and most of my games and softwares. So, I decided to go for Virtualizing Windows 7 inside Ubuntu, but I am confused about which virtualization software should I use on Ubuntu for virtualization.

  Read the article

• Which database to use for quickly and pygtk

  - by usher

  I'm writing application using quickly Pygtk and glade. this application should have database connection (such as MySQL) for reading and writing data from the local or outsourcing machine \ server. However, in my machine there is MySQL installed, but when releasing the app it sould be installed on another ubuntu machine, which may not have mysql and moreover not the same database with the required database name and structure.... So my questions are: Is it a good choice using mysql as database 1.2 If not what is? Is it posible to embeding mysql or other database program during the installation from ubuntu software center? 2.2 If it's posible: hwo(any tutorial?) Where to store secure data outside the mysql (or whatever) for conecting the database every time a user launch the application

  Read the article

• How long does Wubi take to download and/or save place?

  - by Oscar Godson

  I'm downloading Wubi now and it's been downloading the ISO torrent for maybe 2hrs-ish. Is there anyway to check how far along it is? Also, is there a way to save my place or if I cancel this or my computer dies, will it lose the place? If I DO lose my place. Can I download a ISO myself and place it somewhere that Wubi will grab from so it just installs it, not downloads the ISO? (this way I can watch the % too) Im at a conference and my internet is fluctuating between 3-7MBs...if that helps

  Read the article

• cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

  - by Carlos Dunick

  Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

  Read the article

• What program can I use to open .mld (recorded webcam) files?

  - by mike

  I am looking for a program to open video files with the extension .mld (This is a file from a video recording software I had a long time ago). Does anybody know any programs in Ubuntu that can open such files? Zoals de titel luidt: ik ben op zoek naar een programma dat videobestanden met de extensie .mld kan openen. Dit is een bestand van een wecbamrecorder die ik vroeger had op Windows. Alvast heel erg bedankt.

  Read the article

• Apt Configuration problem

  - by Paul

  I am trying to load v11.04 onto my HP desktop hard drive using a USB drive. I used the same USB drive to load the system on my Dell netbook and it loaded successfully. But trying to load on the desktop I get the error " Apt configuration problem. An attempt to configure apt to install additional packages from the CD failed" The installer then crashes. I have nothing in the CD drive. I can boot the system from the USB drive and it works fine. I have tried all options on the load with the same crash each time. I baffled as I successfully loaded my netbook with the same USB with no problems.

  Read the article

• Errors when installing updates

  - by user71613

  I am getting the following errors when installing updates. They started to appear after I upgraded my system to 12.04. Errors were encountered while processing: samba-common samba-common-bin samba grub-pc grub-gfxpayload-lists Setting up samba-common (2:3.6.3-2ubuntu2.2) ... perl: error while loading shared libraries: libperl.so.5.12: cannot open shared object file: No such file or directory dpkg: error processing samba-common (--configure): subprocess installed post-installation script returned error exit status 127 dpkg: dependency problems prevent configuration of samba-common-bin: samba-common-bin depends on samba-common (>= 2:3.4.0~pre1-2); however: Package samba-common is not configured yet. dpkg: error processing samba-common-bin (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of samba: samba depends on samba-common (= 2:3.6.3-2ubuntu2.2); however: Package samba-common is not configured yet. samba depends on samba-common-bin; however: Package samba-common-bin is not configured yet. dpkg: error processing samba (--configure): dependency problems - leaving unconfigured Setting up grub-gfxpayload-lists (0.6) ... Setting up grub-pc (1.99-21ubuntu3.1) ... perl: error while loading shared libraries: libperl.so.5.12: cannot open shared object file: No such file or directory dpkg: error processing grub-pc (--configure): subprocess installed post-installation script returned error exit status 127 Any ideas how to fix this?

  Read the article

• YouTube, no video or sound

  - by Cautious1

  I tried the answers from previous posts without luck. I'm using ubuntu 10.04.4 and youtube shows a black screen, no video and no sound . I uninstalled adobe flash player closed down and reinstalled but it didn’t help. I have run Mint 13 on the same computer and it will play youtube without a problem. I'm not familier with linux language . Using comands in terminal might make everything terminal if I try!

  Read the article

< Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >