Search Results

Search found 55482 results on 2220 pages for 'html line'.

Page 566/2220 | < Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >

  • PHP CLI Application on Debian: why can't I output a line break?

    - by Steffen Müller
    Hello! I have a really puzzling problem: I am writing a PHP CLI application running on a debian server. I am connected to the server via SSH, just the normal way. Everything runs as usual. Except the following: echo "My CLI fun\n\n"; echo "Is this."; Outputs on the SSH terminal, when executing the PHP script: My CLI funIs this. I am really puzzled as I have never had such a problem. The bash behaves normal in all other aspects. I already tried to output chr(10) and such, same problem. Does anybody have a clue?

    Read the article

  • Is it safe to change the 'Security.salt' line to a more lengthy string {64 hex key}

    - by Gaurav Sharma
    Hi everyone, I have changed the Configure::write('Security.salt', '############'); value in the file config/core.php file to a '256-bit hex key'. Is it safe or a good practice to change these lines for every different installation of cakephp application or shall I revert back to the original ? I also changed the Configure::write('Security.cipherSeed','7927237598237592759727'); to a different one of more length. Please throw some light on this. Thanks

    Read the article

  • "OR" Operator must be placed at end of previous line? (unexpected tOROP)

    - by akonsu
    I am running Ruby 1.9. This is a valid syntax: items = (data['DELETE'] || data['delete'] || data['GET'] || data['get'] || data['POST'] || data['post']) But this gives me an error: items = (data['DELETE'] || data['delete'] || data['GET'] || data['get'] || data['POST'] || data['post']) t.rb:8: syntax error, unexpected tOROP, expecting ')' || data['GET'] || data['get'] |... ^ Why?!

    Read the article

  • How do I create a nice-looking DMG for Mac OS X using command-line tools?

    - by Ludvig A Norin
    I need to create a nice installer for a Mac application. I want it to be a disk image (DMG), with a predefined size, layout and background image. I need to do this programmatically in a script, to be integrated in an existing build system (more of a pack system really, since it only create installers. The builds are done separately). I already have the DMG creation done using "hdiutil", what I haven't found out yet is how to make an icon layout and specify a background bitmap.

    Read the article

  • Apache2 Virtual Host broken; displayed default index.html on subdomain, but correct content on www.subdomain

    - by Robert K
    I've got a Linode configured as a Ubuntu 10.04.2 web server with Apache 2.2.14. I have a total of 4 sites, all defined under /etc/apache2/sites-available as virtual hosts. All sites are almost identical clones for configuration. And all sites but my last work successfully. default: (www.)exampleadnetwork.com (www.)example.com reseller.example.com trouble: client1.example.com I keep getting this page when I visit the client1.example.com site: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. In my ports.conf file I have the NameVirtualHost correctly set to my IP address on port 80. If I access the "www.sub.example.com" alias the site works! If I access it without the www I see the "It Works" excerpt posted above. Even apache2ctl -S shows that my vhost file parses correctly and is added to the mix. My vhost configuration file is as follows: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName client1.example.com ServerAlias client1.example.com www.client1.example.com DocumentRoot /srv/www/client1.example.com/public_html/ ErrorLog /srv/www/client1.example.com/logs/error.log CustomLog /srv/www/client1.example.com/logs/access.log combined <directory /srv/www/client1.example.com/public_html/> Options -Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </directory> </VirtualHost> The other sites are variations of: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName example.com ServerAlias example.com www.example.com DocumentRoot /srv/www/example.com/public_html/ ErrorLog /srv/www/example.com/logs/error.log CustomLog /srv/www/example.com/logs/access.log combined </VirtualHost> The only site the differs is the other subdomain: <VirtualHost 127.0.0.1:80> ServerAdmin [email protected] ServerName reseller.example.com ServerAlias reseller.example.com DocumentRoot /srv/www/reseller.example.com/public_html/ ErrorLog /srv/www/reseller.example.com/logs/error.log CustomLog /srv/www/reseller.example.com/logs/access.log combined </VirtualHost> Filenames are the FQDN without the www. prefix. I've followed this advice, but still cannot access subdomain properly.

    Read the article

  • jQuery click event on image only fires once

    - by stephenreece@
    I created a view of thumbnails. When the user clicks, I want the real image to pop-up in a dialog. That works the first time, but once the jQuery 'click' fires on an thumbnail it never fires again unless I reload the entire page. I've tried rebinding the click events on the dialog close that that does not help. Here is my code: function LoadGalleryView() { $('img.gallery').each(function(){ BindImage($(this)); }); } function BindImage(image) { var src= image.attr('src'); var id= image.attr('id'); var popurl = src.replace("thumbs/", ""); image.hover(function(){ image.attr('style', 'height: 100%; width: 100%;'); }, function(){ image.removeAttr('style'); }); $('#'+id).live('click', function() { PopUpImage(popurl); }); } function CheckImage(img,html) { if ( img.complete ) { $('#galleryProgress').html(''); var imgwidth = img.width+35; var imgheight = img.height+65; $('<div id="viewImage" title="View"></div>').html(html).dialog( { bgiframe: true, autoOpen: true, modal: true, width: imgwidth, height: imgheight, position: 'center', closeOnEscape: true }); } else { $('#galleryProgress').html('<img src="images/ajax-loader.gif" /><br /><br />'); setTimeout(function(){CheckImage(img,html);},10); } } function PopUpImage(url) { var html = '<img src="'+url+'" />'; var img = new Image(); img.src = url; if ( ! img.complete ) { setTimeout(function(){CheckImage(img,html);},10); } } PopUpImage() only executes the first time an image is clicked and I cannot figure out how to rebind.

    Read the article

  • How to design a command line program reusable for a future development of a GUI?

    - by systempuntoout
    What are some best practices to keep in mind when developing a script program that could be integrated with a GUI, probably by somebody else, in the future? Possible scenario: i develop a fancy python CLI program that scrapes every unicorn images from the web i decide to publish it on github a unicorn fan programmer decides to take the sources and build a GUI on them. he\she gives up because my code is not reusable How do i avoid step four and let unicorn fan programmer build his\her GUI without hassle?

    Read the article

  • Windows/C++: Is it possible to find the line of code where exception was thrown having "Exception Of

    - by Pavel
    One of our users having an Exception on our product startup. She has sent us the following error message from Windows: Problem Event Name: APPCRASH Application Name: program.exe Application Version: 1.0.0.1 Application Timestamp: 4ba62004 Fault Module Name: agcutils.dll Fault Module Version: 1.0.0.1 Fault Module Timestamp: 48dbd973 Exception Code: c0000005 Exception Offset: 000038d7 OS Version: 6.0.6002.2.2.0.768.2 Locale ID: 1033 Additional Information 1: 381d Additional Information 2: fdf78cd6110fd6ff90e9fff3d6ab377d Additional Information 3: b2df Additional Information 4: a3da65b92a4f9b2faa205d199b0aa9ef Is it possible to locate the exact place in the source code where the exception has occured having this information? What is the common technique for C++ programmers on Windows to locate the place of an error that has occured on user computer? Our project is compiled with Release configuration, PDB file is generated. I hope my question is not too naive.

    Read the article

  • Proper indentation for Python multiline strings

    - by ensnare
    What is the proper indentation for Python multiline strings within a function? def method: string = """line one line two line three""" or def method: string = """line one line two line three""" or something else? It looks kind of weird to have the string hanging outside the function in the first example. Thanks.

    Read the article

  • How to verify if file is according to mask in PHP without reading filename from disk.

    - by php html
    I have a list of file names(I already have the filelist let's say in a text file). I want to process this list in the following way: filenames of type /dirX/subdirX//.ext will be written in a new file all the other filenames will be written in a separate file. Is there any option to verify if a filename corresponds to a mask, without reading the file name from disk?(by filename I mean a simple string). I would like to know if there is such a function that don't require disk access. I know regex could be an workaround but I'd like to have something from php.

    Read the article

  • Why is my Scala function returning type Unit and not whatever is the last line?

    - by Andy
    I am trying to figure out the issue, and tried different styles that I have read on Scala, but none of them work. My code is: .... val str = "(and x y)"; def stringParse ( exp: String, pos: Int, expreshHolder: ArrayBuffer[String], follow: Int ) var b = pos; //position of where in the expression String I am currently in val temp = expreshHolder; //holder of expressions without parens var arrayCounter = follow; //just counts to make sure an empty spot in the array is there to put in the strings if(exp(b) == '(') { b = b + 1; while(exp(b) == ' '){b = b + 1} //point of this is to just skip any spaces between paren and start of expression type if(exp(b) == 'a') { temp(arrayCounter) = exp(b).toString; b = b+1; temp(arrayCounter)+exp(b).toString; b = b+1; temp(arrayCounter) + exp(b).toString; arrayCounter+=1} temp; } } val hold: ArrayBuffer[String] = stringParse(str, 0, new ArrayBuffer[String], 0); for(test <- hold) println(test); My error is: Driver.scala:35: error: type mismatch; found : Unit required: scala.collection.mutable.ArrayBuffer[String] ho = stringParse(str, 0, ho, 0); ^one error found When I add an equals sign after the arguments in the method declaration, like so: def stringParse ( exp: String, pos: Int, expreshHolder: ArrayBuffer[String], follow: Int ) ={....} It changes it to "Any". I am confused on how this works. Any ideas? Much appreciated.

    Read the article

  • How to run scripts within a telnet session?

    - by wenzi
    I want to connect to a remote host using telnet there is no username/password verification just telnet remotehost then I need to input some commands for initialization and then I need to repeat the following commands: cmd argument argument is read from a local file, in this file there are many lines, each line is a argument and after runing one "cmd argument", the remote host will output some results it may output a line with string "OK" or output many lines, one of which is with string "ERROR" and I need to do something according to the results. basically, the script is like: initialization_cmd #some initial comands while read line do cmd $line #here the remote host will output results, how can I put the results into a variable? # here I want to judge the results, like if $results contain "OK";then echo $line >>good_result_log else echo $line >> bad_result_log fi done < local_file the good_result_log and bad_result_log are local files is it possible or not? thanks! NOTE: I can't control B, I can only run initial cmds and cmd $line on B

    Read the article

  • how do i insert html file that have hebrew text and read it back in sql server 2008 using the filest

    - by gadym
    hello all, i am new to the filestream option in sql server 2008, but i have already understand how to open this option and how to create a table that allow you to save files. let say my table contains: id,name, filecontent i tried to insert an html file (that has hebrew chars/text in it) to this table. i'm writing in asp.net (c#), using visual studio 2008. but when i tried to read back the content , hebrew char becomes '?'. the actions i took were: 1. i read the file like this: // open the stream reader System.IO.StreamReader aFile = new StreamReader(FileName, System.Text.UTF8Encoding.UTF8); // reads the file to the end stream = aFile.ReadToEnd(); // closes the file aFile.Close(); return stream; // returns the stream i inserted the 'stream' to the filecontent column as binary data. i tried to do a 'select' to this column and the data did return (after i coverted it back to string) but hebrew chars become '?' how do i solve this problem ? what I should pay attention to ? thanks, gadym

    Read the article

  • How do you access the Source Error, Source File and Line Number of an exception to use in a custom e

    - by Iain Fraser
    Basically I want to take the following: And make it match the styling of the rest of the application. I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.

    Read the article

  • Catchable fatal error: Object of class view_user could not be converted to string in C:\xampp\xampp\htdocs\textile\admin\view_class.php on line 9 [closed]

    - by user1282142
    <?php include('config.inc'); class view_user { function view($user) { $temp = mysql_query("SELECT * from register_user where user_name = '$user'"); $value = mysql_fetch_array($temp); $query = mysql_query("SELECT order_user.design_name, order_user.reaad, order_user.pick, order_user.yarn_detail FROM register_user INNER JOIN order_user ON register_user.register_id = '$value[register_id]' and order_user.register_id = $value[register_id]"); if($query) { echo "<center><table border = 1> <tr> <th>Design Name</th> <th>Read</th> <th>Pick</th> <th>Design Detail</th> </tr>"; while($row = mysql_fetch_array($query)) { echo "<tr>"; echo "<td>$row[design_name]</td>"; echo "<td>$row[reaad]</td>"; echo "<td>$row[pick]</td>"; echo "<td>$row[yarn_detail]</td>"; echo"</tr></center>"; } } else { echo"User doesn't Exist"; include('footer1.php'); } } } ?>

    Read the article

  • Force encoding with IIS 7

    - by Cédric Boivin
    I try to force encoding with IIS 7. When I add in the http response headers the key : Content-Type and value charset=utf-8 i got this key content-type : text/html,content-type=utf-8 it's there a way to remove the comma ? Thanks Justin for your answer. But it's seen don't work. There is my config, i need to do that for asp classic. <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <staticContent> <remove fileExtension=".html" /> <remove fileExtension=".hxt" /> <remove fileExtension=".htm" /> <remove fileExtension=".asp" /> <mimeMap fileExtension=".htm" mimeType="text/html" /> <mimeMap fileExtension=".hxt" mimeType="text/html" /> <mimeMap fileExtension=".html" mimeType="text/html" /> <mimeMap fileExtension=".asp" mimeType="text/html; charset=UTF-8" /> </staticContent> </system.webServer> </configuration>

    Read the article

  • Retrieving models from form with ModelMultipleChoiceField

    - by colinjameswebb
    I am having difficulties with forms, specifically ModelMultipleChoiceField. I've pieced together this code from various examples, but it sadly doesn't work. I would like to be able to: Search for some Works on work_search.html Display the results of the search, with checkboxes next to each result Select the Works I want, via the checkboxes After pressing Add, display which works were selected. I believe everything is okay except the last part. The page simply displays "works" :( Here is the code - sorry about the length. Models.py class Work(models.Model): title = models.CharField(max_length=200) artist = models.CharField(max_length=200) writers = models.CharField(max_length=200) def __unicode__(self): return self.title + ' - ' + self.artist forms.py class WorkSelectForm(forms.Form): def __init__(self, queryset, *args, **kwargs): super(WorkSelectForm, self).__init__(*args, **kwargs) self.fields['works'] = forms.ModelMultipleChoiceField(queryset=queryset, widget=forms.CheckboxSelectMultiple()) views.py def work_search(request): query = request.GET.get('q', '') if query: qset = ( Q(title__icontains=query) | Q(artist__icontains=query) | Q(writers__icontains=query) ) results = Work.objects.filter(qset).distinct() form = WorkSelectForm(results) return render_to_response("work_search.html", {"form": form, "query": query }) else: results = [] return render_to_response("work_search.html", {"query": query }) def add_works(request): #if request.method == POST: form = WorkSelectForm(request.POST) #if form.isvalid(): items = form.fields['works'].queryset return render_to_response("add_works.html", {"items":items}) work_search.html {% extends "base.html" %} {% block content %} <h1>Search</h1> <form action="." method="GET"> <label for="q">Search: </label> <input type="text" name="q" value="{{ query|escape }}"> <input type="submit" value="Search"> </form> {% if query %} <h2>Results for "{{ query|escape }}":</h2> <form action="add_works" method="post"> <ul> {% if form %} {{ form.as_ul }} {% endif %} </ul> <input type="submit" value="Add"> </form> {% endif %} {% endblock %} add_works.html {% extends "base.html" %} {% block content %} {% if items %} {% for item in items %} {{ item }} {% endfor %} {% else %} <p>Nothing selected</p> {% endif %} {% endblock %}

    Read the article

  • Slow performance with MVC2 DisplayFor

    - by PretzelSteelersFan
    I'm iterating through a collection on my view model. The collection contains HealthLifeDentalRates which implement IBeginsEnds. I have a Display Template BeginsEnds that displays the date range. This results in very slow performance. If I simply the date range (see commented code), it's fine. I think how I'm defining the lambda is the problem but not sure how to change it. <% foreach (var item in Model.Data.OrderBy(x=x.HealthLifeDentalRateCode)) { % <tr> <td> <%= Html.Encode(item.FiscalPeriodString()) %> </td> <td> <%= Html.Encode(item.HealthLifeDentalRateCode) %> </td> <td> <%= Html.Encode(item.Rate) %> </td> <td> <%= Html.Encode(item.IsDental.YesNo()) %> </td> <td> <%= Html.DisplayFor(i = item, "BeginsEnds") % - <%= Html.Encode(item.Ends.ToDateString()) % -- <%= Html.Encode(String.Format("{0:g}", item.Loaded)) % - <%= Html.Encode(item.LoadedBy) % <% } %>

    Read the article

  • How to check a complex condition in Smarty(PHP)

    - by php html
    I need to display a section or another in a smarty template. My condition is simple: if a smarty value starts with a string I should display one section, otherwise the other smarty section should be displayed. I can change only the tpl files. {php} if (substr($url,0,4) != 'http') { {/php} section 1 {php} } else { {/php} section 2 {php} } {/php} The problem is that I can not read the url varible which was previously assigned using $smarty-assign. Basically, I'm looking for the smarty function that can be used to retrieve a value, or if there is a better solution.

    Read the article

  • re.sub emptying list

    - by jmau5
    def process_dialect_translation_rules(): # Read in lines from the text file specified in sys.argv[1], stripping away # excess whitespace and discarding comments (lines that start with '##'). f_lines = [line.strip() for line in open(sys.argv[1], 'r').readlines()] f_lines = filter(lambda line: not re.match(r'##', line), f_lines) # Remove any occurances of the pattern '\s*<=>\s*'. This leaves us with a # list of lists. Each 2nd level list has two elements: the value to be # translated from and the value to be translated to. Use the sub function # from the re module to get rid of those pesky asterisks. f_lines = [re.split(r'\s*<=>\s*', line) for line in f_lines] f_lines = [re.sub(r'"', '', elem) for elem in line for line in f_lines] This function should take the lines from a file and perform some operations on the lines, such as removing any lines that begin with ##. Another operation that I wish to perform is to remove the quotation marks around the words in the line. However, when the final line of this script runs, f_lines becomes an empty lines. What happened? Requested lines of original file: ## English-Geek Reversible Translation File #1 ## (Moderate Geek) ## Created by Todd WAreham, October 2009 "TV show" <=> "STAR TREK" "food" <=> "pizza" "drink" <=> "Red Bull" "computer" <=> "TRS 80" "girlfriend" <=> "significant other"

    Read the article

< Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >