Search Results

Search found 19136 results on 766 pages for 'library understanding'.

Page 566/766 | < Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >

  • Having a hard time having consecutive animations for an attack

    - by Kelby Styler
    So I've been trying to figure this out for about 8 hours now...It's driving me nuts because I am pretty sure that it is something dead simple that I am just not understanding. I had everything working fine when I was just cycling through the animation: Idle - Attack - Attack 1 - Attack 2. Just in an infinite loop. The problem now is that I want it to go Attack - check if x time passes if ctrl pressed before x passes move to Attack 1, if not move back to Idle - Then either Attack 1 or Idle depending on how long has passed. I've almost gotten it a few time, but something always happens where it falls apart if I press ctrl too fast or after multiple cycles of the animation. Any help would be appreciated, I'm just at my wits end on this one. I've been looking at this so long that I just don't know where to go anymore. Code is below, here is the controller using UnityEngine; using System.Collections; public class MeleeAttack : MonoBehaviour { public int damage; public bool Attack; public bool Attack1; public bool Attack2; public bool Idle; private Animator animator; private int attnum = 0; private float count = 2f; private float timeLeft; //Gives value to damage output void MAttackDmg () { if (Input.GetKeyDown (KeyCode.RightControl) || Input.GetKeyDown (KeyCode.LeftControl)) { switch (attnum) { case (0): Attack = true; damage = 2; animator.SetBool ("Attack", Attack); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (1): Attack1 = true; damage = 2; animator.SetBool ("Attack1", Attack1); attnum++; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; case (2): Attack2 = true; damage = 2; animator.SetBool ("Attack2", Attack2); attnum = 0; Idle = false; animator.SetBool ("Idle", Idle); timeLeft = count; break; } } if (Input.GetKeyUp (KeyCode.RightControl) || Input.GetKeyUp (KeyCode.LeftControl)) { switch (attnum) { case (0): Debug.Log ("false"); damage = 0; if (timeLeft <= 0f) { Attack2 = false; animator.SetBool ("Attack2", Attack2); Debug.Log ("t1"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (1): Debug.Log ("false1"); damage = 0; if (timeLeft <= 0f) { Debug.Log ("t2"); Attack = false; animator.SetBool ("Attack", Attack); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; case (2): Debug.Log ("false2"); damage = 0; if (timeLeft <= 0f) { Attack1 = false; animator.SetBool ("Attack1", Attack1); Debug.Log ("t3"); Idle = true; animator.SetBool ("Idle", Idle); attnum = 0; timeLeft = count; } break; } } } // Use this for initialization void Awake () { animator = GetComponent<Animator> (); } // Update is called once per frame void Update () { timeLeft -= Time.deltaTime;; MAttackDmg (); } void Start (){ timeLeft = count; } }

    Read the article

  • iPad leak - NSPushAutoreleasePool

    - by Tim Bowen
    We are getting a sizable leak (16kb) that is proving very difficult to eliminate. The responsible library is Foundation and the Responsible frame is NSPushAutoreleasePool. This leak does not appear on the iPhone, only the iPad. We get the following stack trace: 9 libSystem.B.dylib thread_assign_default 8 libSystem.B.dylib _pthread_start 7 WebCore RunWebThread(void*) 6 CoreFoundation CFRunLoopRunInMode 5 CoreFoundation CFRunLoopRunSpecific 4 CoreFoundation __CFRunLoopDoObservers 3 WebCore WebRunLoopLock(__CFRunLoopObserver*, unsigned long, void*) 2 Foundation NSPushAutoreleasePool 1 Foundation _NSAPAddPage 0 libSystem.B.dylib malloc We're getting a similar one in the frame NSAutoReleasePool. We've checked everywhere in the code we create an autoreleasepool to make sure we're releasing it. Since none of this is our code I'm not sure how to proceed. Thanks in advance.

    Read the article

  • Flash in firefox does not start unitl they show in page

    - by Leonardo
    I have this little problem. My client wanted two distinct swf on a web page: a viewer on top and a slideshow of images at bottom. Clicking a link on the slideshow make the viewer load a movie, by means of LocalConnection api. The slideshow has a default, so when the page is loaded a default movie start. This works nice on all browser. The only problem I have is on firefox. When screen resolution is too low, or the monitor is too small (netbook) the slideshow remain hidden until scrolling. Therefore at page loading it doesn't start and the main viewer don't get instructed on playing the default video. As soon as I scroll the page, and the slideshow swf display on page, it starts and everything works fine. Do you know if there are any solution to this ? I cannot change the design, I must have two distinct swf, they come from a library he has, and I am trying to reuse components. thanks Leonardo

    Read the article

  • Delving into design patterns, and what that means for the Oracle user experience

    - by Kathy.Miedema
    By Kathy Miedema, Oracle Applications User Experience George Hackman, Senior Director, Applications User Experiences The Oracle Applications User Experience team has some exciting things happening around Fusion Applications design patterns. Because we’re hoping to have some new offerings soon (stay tuned with VoX to see what’s in the pipeline around Fusion Applications design patterns), now is a good time to talk more about what design patterns can do for the individual user as well as the entire company. George Hackman, Senior Director of Operations User Experience, says the first thing to note is that user experience is not just about the user interface. It’s about understanding how people do things, observing them, and then finding the patterns that emerge. The Applications UX team develops those patterns and then builds them into Oracle applications. What emerges, Hackman says, is a consistent, efficient user experience that promotes a productive workplace. Creating design patterns What is a design pattern in the context of enterprise software? “Every day, people use technology to get things done,” Hackman says. “They navigate a virtual world that reaches from enterprise to consumer apps, and from desktop to mobile. This virtual world is constantly under construction. New areas are being developed and old areas are being redone. As this world is being built and remodeled, efficient pathways and practices emerge. “Oracle's user experience team watches users navigate this world. We measure their productivity and ask them about their satisfaction. We take the most efficient, most productive pathways from the enterprise and consumer world and turn them into Oracle's user experience patterns.” Hackman describes the process as combining all of the best practices from every part of a user’s world. Members of the user experience team observe, analyze, design, prototype, and measure each work task to find the best possible pattern for a particular work flow. As the team builds the patterns, “we make sure they are fully buildable using Oracle technology,” Hackman said. “So customers know they can use these patterns. There’s no need to make something up from scratch, not knowing whether you can even build it.” Hackman says that creating something on a computer is a good example of a user experience pattern. “People are creating things all the time,” he says. “On the consumer side, they are creating documents. On the enterprise side, they are creating expense reports. On a mobile phone, they are creating contacts. They are using different apps like iPhone or Facebook or Gmail or Oracle software, all doing this creation process.” The Applications UX team starts their process by observing how people might create something. “We observe people creating things. We see the patterns, we analyze and document, then we apply them to our products. It might be different from phone to web browser, but we have these design patterns that create a consistent experience across platforms, and across products, too. The result for customers Oracle constantly improves its part of the virtual world, Hackman said. New products are created and existing products are upgraded. Because Oracle builds user experience design patterns, Oracle's virtual world becomes both more powerful and more familiar at the same time. Because of design patterns, users can navigate with ease as they embrace the latest technology – because it behaves the way they expect it to. This means less training and faster adoption for individual users, and more productivity for the business as a whole. Hackman said Oracle gives customers and partners access to design patterns so that they can build in the virtual world using the same best practices. Customers and partners can extend applications with a user experience that is comfortable and familiar to their users. For businesses that are integrating different Oracle applications, design patterns are key. The user experience created in E-Business Suite should be similar to the user experience in Fusion Applications, Hackman said. If a user is transitioning from one application to the other, it shouldn’t be difficult for them to do their work. With design patterns, it isn’t. “Oracle user experience patterns are the building blocks for the virtual world that ensure productivity, consistency and user satisfaction,” Hackman said. “They are built for the enterprise, but incorporate the best practices from across the virtual world. They empower productivity and facilitate social interaction. When you build with patterns, you get all the end-user benefits of less training / retraining from the finished product. You also get faster / cheaper development.” What’s coming? You can already access design patterns to help you build Dashboards with OBIEE here. And we promised you at the beginning that we had something in the pipeline on Fusion Applications design patterns. Look for the announcement about when they are available here on VoX.

    Read the article

  • Reading Local Group Policy / Active Directory Settings

    - by Shinobi
    I'm writing a C# program that will enforce password complexity in accordance with the Windows Group Policy setting "Password must meet complexity requirements". Specifically, if that policy is set to Enabled either on the local machine (if it's not part of a domain) or by the Domain Security Policy (for domain members), then my software needs to enforce a complex password for its own internal security. The issue is that I can't figure out how to read that GPO setting. Google searches have indicated that I can read GPO settings with one of these two APIs: the System.DirectoryServices library in .NET Framework, and Windows Management Instrumentation (WMI), but I haven't had any success so far. Any insights would be helpful.

    Read the article

  • CodePlex Daily Summary for Thursday, December 06, 2012

    CodePlex Daily Summary for Thursday, December 06, 2012Popular ReleasesPeriodic.Net: 0.8: Whats new for Periodic.Net 0.8: New Element Info Dialog New Website MenuItem Minor Bug Fix's, improvements and speed upsXLS File Deployment: XLS File Deployment V1.0: Initial releasemp3player-xslt-plugin: mp3player module 1.0: This is a mp3 player module that you can install on your umbraco project. It can display the list of the media and you can click the button to play or stop.Yahoo! UI Library: YUI Compressor for .Net: Version 2.2.0.0 - Epee: New : Web Optimization package! Cleaned up the nuget packages BugFix: minifying lots of files will now be faster because of a recent regression in some code. (We were instantiating something far too many times).DtPad - .NET Framework text editor: DtPad 2.9.0.40: http://dtpad.diariotraduttore.com/files/images/flag-eng.png English + A new built-in editor for the management of CSV files, including the edit of cells, deleting and adding new rows, replacement of delimiter character and much more (issue #1137) + The limit of rows allowed before the decommissioning of their side panel has been raised (new default: 1.000) (issue #1155, only partially solved) + Pressing CTRL+TAB now DtPad opens a screen that shows the list of opened tabs (issue #1143) + Note...AvalonDock: AvalonDock 2.0.1746: Welcome to the new release of AvalonDock 2.0 This release contains a lot (lot) of bug fixes and some great improvements: Views Caching: Content of Documents and Anchorables is no more recreated everytime user move it. Autohide pane opens really fast now. Two new themes Expression (Dark and Light) and Metro (both of them still in experimental stage). If you already use AD 2.0 or plan to integrate it in your future projects, I'm interested in your ideas for new features: http://avalondock...AcDown?????: AcDown????? v4.3.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ?? v4.3.2?? ?????????????????? ??Acfun??????? ??Bilibili?????? ??Bilibili???????????? ??Bilibili????????? ??????????????? ???? ??Bilibili??????? ????32??64? Windows XP/...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.2: ??FineUI ?? ExtJS ??? ASP.NET 2.0 ???。 FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License 2.0 (Apache) ???? ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ ???? +2012-12-03 v3.2.2 -?????????????,?????button/button_menu.aspx(????)。 +?Window????Plain??;?ToolbarPosition??Footer??;?????FooterBarAlign??。 -????win...Player Framework by Microsoft: Player Framework for Windows Phone 8: This is a brand new version of the Player Framework for Windows Phone, available exclusively for Windows Phone 8, and now based upon the Player Framework for Windows 8. While this new version is not backward compatible with Windows Phone 7 (get that http://smf.codeplex.com/releases/view/88970), it does offer the same great feature set plus dozens of new features such as advertising, localization support, and improved skinning. Click here for more information about what's new in the Windows P...SSH.NET Library: 2012.12.3: New feature(s): + SynchronizeDirectoriesQuest: Quest 5.3 Beta: New features in Quest 5.3 include: Grid-based map (sponsored by Phillip Zolla) Changable POV (sponsored by Phillip Zolla) Game log (sponsored by Phillip Zolla) Customisable object link colour (sponsored by Phillip Zolla) More room description options (by James Gregory) More mathematical functions now available to expressions Desktop Player uses the same UI as WebPlayer - this will make it much easier to implement customisation options New sorting functions: ObjectListSort(list,...Chinook Database: Chinook Database 1.4: Chinook Database 1.4 This is a sample database available in multiple formats: SQL scripts for multiple database vendors, embeded database files, and XML format. The Chinook data model is available here. ChinookDatabase1.4_CompleteVersion.zip is a complete package for all supported databases/data sources. There are also packages for each specific data source. Supported Database ServersDB2 EffiProz MySQL Oracle PostgreSQL SQL Server SQL Server Compact SQLite Issues Resolved293...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.34: changes FIXED: Thanks Function when "Download each post in it's own folder" is disabled FIXED: "PixHub.eu" linksD3 Loot Tracker: 1.5.6: Updated to work with D3 version 1.0.6.13300?????????? Microsoft Office 2013 ? 1? – ????? ???????????: ???????? ???? ???????? ?? ???????: ???? ????????? ???????? ???? ???????????????? ????????Jobboard Light Edition: Version 4.1: Updates Migration to Oracle 11g Express Changed CSS Improved entity framework connectivity Works with ODAC 11.2 Release 5 (11.2.0.3.20) with Oracle Developer Tools for Visual Studio Changed Data Layer Changed Business Layer Cleaned Oracle dbgen scriptsDirectoryEnumeratorAsync: Initial Release: Visual Studio 2012 SolutionBundler.NET: Bundler.NET 1.3.0: Added speed enhancements. It's faster than System.Web.Optimization! Added a bundle option that will include a file extension when alias names are used.AutoFixture: 2.15.4: This is an automatically published release created from the latest successful build. Versioning is based on Semantic Versioning. Read more here: http://blog.ploeh.dk/2011/09/06/AutoFixtureGoesContinuousDeliveryWithSemanticVersioning.aspx????????API for .Net SDK: SDK for .Net ??? Release 5: 2012?11?30??? ?OAuth?????????????????????SDK OAuth oauth = new OAuth("<AppKey>", "<AppSecret>", "<????>"); WebProxy proxy = new WebProxy(); proxy.Address = new Uri("http://proxy.domain.com:3128");//??????????? proxy.Credentials = new NetworkCredential("<??>", "<??>");//???????,??? oauth.Proxy = proxy; //??????,?~ New Projects.Net Source Code Syntax Highligher: High efficiency, detailed syntax highlighter for .Net source code.(a developer resource)12061327: d13261206: df1edex: 1edex40Fingers Simple Title Skin Object for DotNetNuke: Templatable DotNetNuke Title Skin Object. Renders cleaner HTML then default SKO. Will show the "page name" if used in a Skin, "module title" in a Container.aaa: fewfewAjaxShowOff: Ajax MVC ASP.NETBusStationTest: sdasdsadsadsadadsaCaseModelDataStore: use case data and model accumulateCiberSegurosWpf: ciberseguros wpfCodeSmith v3.x provider for VistaDB 3+: A CodeSmith v3.x provider for the excellent VistaDB .Net database engine.Cropper.TimeCapture: Captures at regular intervals of time the desktop/active window, along with his text See also CropperPlugins - http://www.codeplex.com/cropperplugins Cropper - http://www.codeplex.com/cropper It's developed in C#Distinct CAPTCHA Web Service: Distinct CAPTCHA used to add CAPTCHA to asp.net, InfoPath and SharePoint. The web service supports two methods one for generate and one to validate File Upload App: This is a silverlight 4 app, it used for upload files with progress bar. You can download it and run it directly. ???silverlight 4.0 ??, ???????,??????,???????FluentScriptWeb: Application for hosting FluentScript interpreter in a website for testing purposes.Fwql.Net: Fwql.Net is a General Class Libraries Collection.GaoPMS: NoneGuestbook Source Control: the codes in the bookHello world katal cloud: test katal cloud.net projectHREntry: TBDLyricFinder: Component for searching lyric by song title, artist, album, lyric part and topic/tagsPERSONAL PICTURE VIEWER 1.0: This is a picture viewer application that is programmed in C#.NET based on .NET 4.0 or higher.php pagination with shorter show page number: pagination in php pkrss: c++ version:pkrss.sf.net csharp version:is here. pkrss.sf.net is c++ version desktop productor written by qt 4.7.3. pkrss.codeplex is csharp version web productor.Plataforma: Plataforma MVC EntityProductivity Toolkit: This project is currently in its initial stage. prototype Assignement: prototype assignment Rational Team Concert Chrome Extensions: Google Chrome Extensions for Rational Team Concert. - Scrum Card PrintResource Monitor: Det er her vi er samlet om opgaven.rloreto@gmail.com: Caching for Windows Store Applications (Windows 8 WinRT)SignalRefresh: SignalRefresh is a open source project that as target has all .net developers that write pages and are board refreshing page after changes are done in source .SimpleTrack: SimpleTrack is a simplified alternative to the multitude of issue, bug and request trackers. This project is in response to painful experiences of trying to find a tracking solution which is not narrow in focus, yet not brutally complex. Singer: task 2 projectSitecore PowerShell Console for Sitecore Rocks: Sitecore PowerShell Console companion project that allows for it to be exposed in Sitecore Rocks.System Tools: Powerful tools for Windows in Batch File Delete Windows temporary Files Check if Port open Virus Scan Disable Default Sharing Format C: Drive Safely ShutdownTask Tracker: Task Tracker is a user customizable winform project to log details of tasks.TeslaFlux: Trytestddhg12052012hg01: xzcctesttom12052012git01: gfdgfdgtesttom12052012git02: gfdtesttom12052012hg01: fdstesttom12052012tfs01: fdstesttom12052012tfs02: fdsTyingsoftPortal: Tyingsoft Portal Websitewiki2doc: A tool to download a surtain namespace of a wiki and transform it into a documention format, like a windows help file (.chm) or a e-reader document (.epub).Windows (8) Update Notifier: Windows Update Notifier informs about Windows Updates via a desktop notification popup.The application only appears as an icon in the system tray.Windows 8 Isolated Storage: Useful tool to save data in Isolated Storage.WLW Insert Links Plugin: A plugin for Windows Live Writer: it combines an RSS/Atom-based link insert tool and a category heading insert tool (with linked Table of Contents).

    Read the article

  • How do I uncompress data in PHP which was originally compressed using zlib?

    - by Gaurav Arora
    Hello Everyone, I am quite new to Iphone development , so please bear me if I ask some some common questions. In my application I have to transfer data from my Iphone app to a PHP server and for this I have to compress the NSdata in my Iphone app and then pass it on to the PHP server and then Uncompress it in PHP and process the data sent by Iphone in PHP. For compressing the data in Iphone I have used zlib library.Now on PHP side I want to uncompress this data , but I am unable to do so. Can anyone help me in uncompressing this data in PHP. Thanks in Advance. Gaurav Arora

    Read the article

  • json parse error in ruby - unexpected token at

    - by RahTha
    Hi, I get errors at a lot of places when trying to retrieve ticker symbols for US companies from http://d.yimg.com/autoc.finance.yahoo.com/autoc?callback=YAHOO.Finance.SymbolSuggest.ssCallback&query=Wal-Mart I have tried to: resp = Net::HTTP.get_response(URI.parse(url)) data = resp.body qwe = data.split("symbol") p qwe[1] arr1 = data.split("(") arr2 = arr1[1].split(")") fnl = arr2[0].gsub(/-/, '') fnl = fnl.gsub(/\(/, '') fnl = fnl.gsub(/\)/, '') fnl = fnl.gsub(/\./, '') fnl = fnl.gsub('\'', '"') fnl = fnl.gsub(/([\{|\,}])\s*([a-zA-Z]+):/, '\1 "\2":') But this doesnt help as i see: /Library/Ruby/Gems/1.8/gems/json-1.2.0/lib/json/common.rb:123:in `parse': 353: unexpected token at '{"symbol":"BEEV","name": "BENCHMARK ENERGY CORP ' (JSON::ParserError) Any clues as to what i might be doing wrong?

    Read the article

  • How to parse AMF data in Ruby?

    - by Matchu
    So I see that there are a few Rails plugins for serving AMF. However, is there a library that I can use in a Ruby environment to act as an AMF client: to read AMF data, and deserialize it into a Ruby object? If not, how could I best go about using tools built in other languages? I suppose I could write something in Python or Java or whatever, and call it from Ruby directly via backticks... but I'd first like to ensure that there isn't really any better option. Thanks!

    Read the article

  • Could not load php_curl

    - by Ruslan
    Hello I have installed php5.2.13, apache2.2.15 on WindowsXp.Add C:\php to PATH ssystem variable. I can't enable curl extension. I configure extension_dir and remove ";" form php_curl in php.ini but nothing! I copied ssleay32.dll and libeay32.dll in system32 directory - nothing Error log say: PHP Warning: PHP Startup: Unable to load dynamic library 'C:\php\ext\php_curl.dll' - Attempt to access invalid address.\r\n in Unknown on line 0 Can someone help me? Thanks and sorry for bad english.

    Read the article

  • Write a MAT file without using matlab headers and libraries.

    - by YuppieNetworking
    Hello all, I have some data that I would like to save to a MAT file (version 4 or 5, or any version, for that matter). The catch: I wanted to do this without using matlab libraries, since this code will not necessary run in a machine with matlab. My program uses Java and C++, so any existing library in those languages that achieves this could help me out... I did some research but did not find anything in Java/C++. However, I found that scipy on python achieves this with mio4.py or mio5.py. I thought about implementing this on java or C++, but it seems a bit out of my time schedule. So the question is: is there any libraries in Java or C/C++ that permits saving MAT files without using Matlab libraries? Thanks a lot

    Read the article

  • 7 reasons you had to be at JavaOne Latin America 2012

    - by Bruno.Borges
    Yesterday was 12/12/12, and everybody went crazy on Twitter with cool memes like this one. And maybe you are now wondering why I mentioned 7 (seven) on the blog title. Because I want to play numbers? Yes! Today is 7 days after JavaOne Latin America 2012 is over (... and I had to figure out an excuse for taking so long to blog about it...). So unless you were at JavaOne Latin America this year, here are 7 things you missed: OTN Lounge mini-theatreThere was a mini-theatre holding several lightning talks. We had people from SouJava JUG, GoJava JUG, Globalcode, and several other Java gurus and companies running demos, talks, and even more. For example, @drspockbr talked about the ScrumToys project, that demonstrates the power of JSF. Hands On Lab for JAX-RS and WebSocketsOne of the cool things to do during JavaOne is to come to these Hands On labs and really do something using new technologies with the help of experts. This one in particular, was covered by me, Arun Gupta, and Reza Rahman. The HOL had more people than laptops (and we had 48 laptops!) interested on understanding and learning about the new stuff that is coming within Java EE 7. Things like JAX-RS, Server-sent Events and WebSockets. Hey, if you want to try this HOL by yourself, it is available on Github, so go for it! If you have questions, just let me know! Java Community KeynoteThis keynote presented a lot of cool things like startups using Java in their projects, the Duke Awards, SouJava winning the JCP Outstanding Award, the Java Band, and even more! It was really a space where the Java community could present what they are doing and what they want to do. There's a lot of interest on the Adopt-a-JSR program and the Adopt-OpenJDK. There's also an Adopt-a-JavaEE-JSR program! Take a look if you want to participate and Make the Future Java. Java EE (JMS, JAX-RS) sessions from Reza Rahman, the HeavyMetal guyReza is a well know professional and Java EE enthusiast from the communitty who just joined Oracle this year. His sessions were very well attended, perhaps because of a high interest on the new things coming to Java EE 7 like JMS 2.0 and JAX-RS 2.0. If you want to look at what he did at this JavaOne edition, read his blog post. By the way, if you like Java and heavymetal, you should follow him on Twitter as well! :-) Java EE (WebSockets, HTML5) sessions from Arun Gupta, the GlassFish guyIf you don't know Arun Gupta, no worries. You will have time to know about him while you read his Java EE 6 Pocket Guide. Arun has been evangelizing Java EE for a long time, and is now spreading his word about the new upcoming version Java EE 7. He gave one talk about HTML5 Productivity on the Java EE 7 platform, and another one on building web apps with WebSockets. Pretty neat! Arun blogged about JavaOne Latin America as well. Read it here. Java Embedded and JavaFXIf there are two things that are really trending in the Java World right now besides Java EE 7, certainly they are JavaFX and Java Embedded. There were 14 talks covering Java Embedded, from Java Cards to Raspberry.pi, from Java ME to Java on your TV with Ginga-J. The Internet of Things is becoming true, and Java is the only platform today that can connect it all in an standardized and concise way. JavaFX gained a lot of attention too. There were 8 sessions covering what the platform has to offer in terms of Rich User Experience. The JavaFX Scene Builder is an awesome tool to start playing designing an UI, and coding for JavaFX is like coding Swing with 8 hands, one holding your coffee cup. You can achieve a lot, with your two hands (unless, you really have 8 hands, then you can achieve 4 times more :-). If you want to read more about JavaFX, go to Stephen Chin's blog post. GlassFish and Friends Party, 1st edition at JavaOne Lating AmericaThis is probably the thing that I'm most proud. We brought to Brasil the tradition of holding a happy hour for all GlassFish, Java EE friends. This party started almost 7 years ago in San Francisco, and it was about time to bring it to Brazil! The party happened on Tuesday night, right after JavaOne General Keynote, at the Tribeca Pub. We had about 80 attendees and met a lot of Java EE developers there! People from JUGs, Oracle, Locaweb and Red Hat showed up too, including some execs from Oracle that didn't resist and could not miss a party like this one.Lots of caipirinhas, beer and food to everyone, some cool music... even The Fish walking around the party with Juggy!You can see more photos from the party on an album I shared with the recently created GlassFish Brasil community on Google+ here (but you may be more interested in joining the GlassFish english community). There's also more pictures that Arun took and shared on this link. So now you may want to consider coming to Brazil next year! Java EE 7 is on its way, and Brazil is happily and patiently waiting for it, with a lot of enthusiasm. By the way, GlassFish and Java EE 6 just celebrated a Happy Birthday!

    Read the article

  • GC.AddMemoryPressure

    - by Steve Sheldon
    I am writing an application in C# that makes use of a 3rd party COM DLL, this dll creates a lot of resources (like bitmaps, video, data structures) in unmanaged memory. While digging around I came across the following call for the Garbage Collector: GC.AddMemoryPressure(long long bytesAllocated) It is documented in MSDN here: http://msdn.microsoft.com/en-us/library/system.gc.addmemorypressure.aspx This sounds like something I should be calling since this external dll is createing a lot of resources the CLR is unaware of. I guess I have two questions... How do I know how much memory pressure to add when the dll is 3rd party and it's not possible for me to know exactly how much memory this dll is allocating. How important is it to do this?

    Read the article

  • JRuby Slick CanvasGameContainer using too much heap memory

    - by Jwosty
    I'm using Java's Slick library (great, by the way) just fine from JRuby. To start a game, I use AppGameContainer which works completely fine and as expected, but if I try to use CanvasGameContainer instead (I want a resizable window and Slick uses an old version of LWJGL that doesn't support this directly) it throws this error: Fri Jun 01 10:22:07 MDT 2012 INFO:Slick Build #274 Error: Your application used more stack memory than the safety cap of 2048K. Specify -J-Xss####k to increase it (#### = cap size in KB). Specify -w for full StackOverflowError stack trace I've tried increasing the heap size until my computer can't allocate any more memory, but to no avail. The CanvasGameContainer uses an awt window to display, which is resizable. Any ideas on why this is happening and/or how to fix this?

    Read the article

  • CAB file for X86 and X64

    - by ramanakumar
    HI I have created a CAB file for an ActiveX component which is wrapper around a .Net Libray. Here the .Net Library is refering some third party components which are actually build in (X86 or X64) No Any CPU. So My Cab file should be intelligent enogh to install eigther X86 or X64 depending on the client ( Browser) I Know the change should be in the INF file. As i am new to thsi Interoperabilit technology. Please guide me in solving this problem. Thanking you.

    Read the article

  • Recommendations for 'C' Project architecture guidlines?

    - by SiegeX
    Now that I got my head wrapped around the 'C' language to a point where I feel proficient enough to write clean code, I'd like to focus my attention on project architecture guidelines. I'm looking for a good resource that coves the following topics: How to create an interface that promotes code maintainability and is extensible for future upgrades. Library creation guidelines. Example, when should I consider using static vs dynamic libraries. How to properly design an ABI to cope with either one. Header files: what to partition out and when. Examples on when to use 1:1 vs 1:many .h to .c Anything you feel I missed but is important when attempting to architect a new C project. Ideally, I'd like to see some example projects ranging from small to large and see how the architecture changes depending on project size, function or customer. What resource(s) would you recommend for such topics? Thanks

    Read the article

  • CodePlex Daily Summary for Wednesday, March 02, 2011

    CodePlex Daily Summary for Wednesday, March 02, 2011Popular ReleasesDocument.Editor: 2011.9: Whats new for Document.Editor 2011.9: New Templates System New Plug-in System New Replace dialog New reset settings Minor Bug Fix's, improvements and speed upsTortoiseHg: TortoiseHg 2.0: TortoiseHg 2.0 is a complete rewrite of TortoiseHg 1.1, switching from PyGtk to PyQtVG Content Display Web Part: VG Content Display Web Part V1.0: Install package shall be installed using PowerShell or stsadm commands or using Central Administration interface. Please see instructions in the http://vgcdwp.codeplex.com/releases/view/61805#DownloadId=212622 file.DirectQ: Release 1.8.7 (Beta 3): Fixes some problems and adds some more enhancements.Sandcastle Help File Builder: SHFB v1.9.2.0 Release: This release supports the Sandcastle June 2010 Release (v2.6.10621.1). It includes full support for generating, installing, and removing MS Help Viewer files. This new release is compiled under .NET 4.0, supports Visual Studio 2010 solutions and projects as documentation sources, and adds support for projects targeting the Silverlight Framework. NOTE: The included help file and the online help have not been completely updated to reflect all changes in this release. A refresh will be issue...Network Monitor Open Source Parsers: Microsoft Network Monitor Parsers 3.4.2554: The Network Monitor Parsers packages contain parsers for more than 400 network protocols, including RFC based public protocols and protocols for Microsoft products defined in the Microsoft Open Specifications for Windows and SQL Server. NetworkMonitor_Parsers.msi is the base parser package which defines parsers for commonly used public protocols and protocols for Microsoft Windows. In this release, we have added 4 new protocol parsers and updated 79 existing parsers in the NetworkMonitor_Pa...Ajax Minifier: Microsoft Ajax Minifier 4.13: New features: switches and settings for turning off Conditional Compilation comment processing; for adding variable and/or function names that should not be renamed automatically; for adding manual renaming of variables/functions/properties; for automatic evaluation of certain literal expressions (but not all).Image Resizer for Windows: Image Resizer 3 Preview 1: Prepare to have your minds blown. This is the first preview of what will eventually become 39613. There are still a lot of rough edges and plenty of areas still under construction, but for your basic needs, it should be relativly stable. Note: You will need the .NET Framework 4 installed to use this version. Below is a status report of where this release is in terms of the overall goal for version 3. If you're feeling a bit technically ambitious and want to check out some of the features th...JSON Toolkit: JSON Toolkit 1.1: updated GetAllJsonObjects() method and GetAllProperties() methods to JsonObject and Properties propertiesFacebook Graph Toolkit: Facebook Graph Toolkit 1.0: Refer to http://computerbeacon.net for Documentation and Tutorial New features:added FQL support added Expires property to Api object added support for publishing to a user's friend / Facebook Page added support for posting and removing comments on posts added support for adding and removing likes on posts and comments added static methods for Page class added support for Iframe Application Tab of Facebook Page added support for obtaining the user's country, locale and age in If...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7.1: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager small improvements for some helpers and AjaxDropdown has Data like the Lookup except it's value gets reset and list refilled if any element from data gets changedManaged Extensibility Framework: MEF 2 Preview 3: This release aims .net 4.0 and Silverlight 4.0. Accordingly, there are two solutions files. The assemblies are named System.ComponentModel.Composition.Codeplex.dll as a way to avoid clashing with the version shipped with the 4th version of the framework. Introduced CompositionOptions to container instantiation CompositionOptions.DisableSilentRejection makes MEF throw an exception on composition errors. Useful for diagnostics Support for open generics Support for attribute-less registr...PHPExcel: PHPExcel 1.7.6 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.4: Version: 2.0.0.4 (Milestone 4): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...VidCoder: 0.8.2: Updated auto-naming to handle seconds and frames ranges as well. Deprecated the {chapters} token for auto-naming in favor of {range}. Allowing file drag to preview window and enabling main window shortcut keys to work no matter what window is focused. Added option in config to enable giving custom names to audio tracks. (Note that these names will only show up certain players like iTunes or on the iPod. Players that support custom track names normally may not show them.) Added tooltips ...SQL Server Compact Toolbox: Standalone version 2.0 for SQL Server Compact 4.0: Download the Visual Studio add-in for SQL Server Compact 4.0 and 3.5 from here Standalone version of (most of) the same functionality as the add-in, for SQL Server Compact 4.0. Useful for anyone not having Visual Studio Professional or higher installed. Requires .NET 4.0. Any feedback much appreciated.Claims Based Identity & Access Control Guide: Drop 1 - Claims Identity Guide V2: Highlights of drop #1 This is the first drop of the new "Claims Identity Guide" edition. In this release you will find: All previous samples updated and enhanced. All code upgraded to .NET 4 and Visual Studio 2010. Extensive cleanup. Refactored Simulated Issuers: each solution now gets its own issuers. This results in much cleaner and simpler to understand code. Added Single Sign Out support. Added first sample using ACS ("ACS as a Federation Provider"). This sample extends the ori...Simple Notify: Simple Notify Beta 2011-02-25: Feature: host the service with a single click in console Feature: host the service as a windows service Feature: notification cient application Feature: push client application Feature: push notifications from your powershell script Feature: C# wrapper libraries for your applicationspatterns & practices: Project Silk: Project Silk Community Drop 3 - 25 Feb 2011: IntroductionWelcome to the third community drop of Project Silk. For this drop we are requesting feedback on overall application architecture, code review of the JavaScript Conductor and Widgets, and general direction of the application. Project Silk provides guidance and sample implementations that describe and illustrate recommended practices for building modern web applications using technologies such as HTML5, jQuery, CSS3 and Internet Explorer 9. This guidance is intended for experien...Minemapper: Minemapper v0.1.5: Now supports new Minecraft beta v1.3 map format, thanks to updated mcmap. Disabled biomes, until Minecraft Biome Extractor supports new format.New ProjectsAndrea Angella Personal Repository: This is my personal code repository.Audipyme: Aplicación web para el análisis y gestión de riesgos basado en la norma ISO 27001.Backfire 4 Umbraco: An implementation of backfire to work with UmbracoBadminton: Source codeCarManagement: Car ManagementCEQuery: CEQuery is usefull for managing SQL Server CE databases. It is developed in C# and supports SQL Server CE 3.5 and 4.0.Circuit Diagram: Circuit Diagram enables you to make electronic circuit diagrams and allows them to be exported as images. Ideal for use in coursework, you no longer have to use image editing programs to paste components together.CodeI2iportal: fdfdfCycling waypoints for Windows Phone 7: Show cycling POI on the Windows Phone 7d3d test: no summarydaemoniq - windows service hosting for mere mortals: Daemoniq provides a layer of a abstraction on top of System.ServiceProcess. This allows developers to concentrate on the functionality of their windows services in .Net by providing functionality such as configuration, deployment and debuggability.DimMock: DimMock is an object mocking framework for .NET Framework 4.0 that enables developers to mock simple and mildly complex classes extremely quick. euler 11: euler 11 problemeuler 30: euler 30euler 36 problem: euler 36 problemFiverw: Fiverw with ASP.NETGameList Creator for Wario's Jewel (GameBoy emulator for Windows Phone 7): Cette application vous permet de créer un catalogue de jeux vidéo pour des émulateurs mobiles et notamment Wario's Jewels, un emulateur GameBoy pour WP7. This application make it easier to create a game list for mobile emulators like Wario's Jewels, an WP7 GameBoy emulator.Gestion no Conformes: Gestión de No ConformesIamV Silverlight player: SilverLight photo album and music playerIcon Manager for Umbraco: Icon Manager for Umbraco - manage the icons within the setting secion of Umbraco by adding / removing from an available icon poolIE9 Extensions 4 Umbraco: A set of IE 9 extensions for Umbracoie9ify: A jQuery Plugin for adding IE9 features (site pinning, site mode, etc.) to your websitesImgUR.NET: ImgUr.NET helps the new .NET programmer host images on ImgUr. Developed in Visual Basic 2010, it can be used using only one line of code! You don't even need to parse the XML, ImgUr.NET automagically extract the URL and gives it to you! You can also get raw XML to parse yourself.Markup Programmability: Markup Programmability extends Blend Interactivity to a full programming language in markup: control flow, expressions, functions, objects, commands, converters, events, and more. Write an MVVM prototype in markup-only or use it for enhanced interactivity.MSCRM 4.0 Appointment Reminders (popup application without needing Outlook!): MSCRM 4.0 Appointment Reminders (popup application without Outlook!). Want to have your CRM Appointments popup on your desktop but don't have Outlook? Frustated by the CRM connection always going down and disconnecting itself? Built for local network use.myAspPracticals: my Asp.net pacticals-practical2NickMaoMix: It is only a sample project in Spring.Net + NHibernate + ASP.NET MVCOrchard Content Permissions: Orchard module enabling users to permit access to specified content items.Orchard LatestTwitter Module: Display latest Tweets for a user in an Orchard widget.PDF Little Signer: PDF Little Signer is a .NET3.5 library for self signing PDF document. It's very easy to use. It uses iTextSharp.perolas: perolasPGeom2D: PGeom2D is an attempt to derive the project http://livegeometry.codeplex.com/ as a more CAD oriented / desktop application. - it should use GDI+ instead of silverlight / WPF. - it should provide layers and blocks features. - it should support more export/import formats.Practical4: This is my practical4 webApplicationQxado: A .net framework written by BillQianReactive Extensions (Rx) Koans: Use this VS2010 project to learn Reactive (Rx) by doing small hacks in prepared lessons. Koans are a great way to get started learning Rx. Included Topics are: Observable Streams Time Events Aggregations Subscriptions RegularPractice: It is a project where i can upload my own prectice and demo projects of asp.net .RSVP04: RSVP systemschool project: Studiegids Projectshowyourfrustration: This web site is made for fun and enjoy over the internat.Silverlight Classified Cabinet: The Silverlight Classified Cabinet is a component that makes it easier to show classified items in a nice way. With the power of Silverlight, it lets users zoom and drag the items, categorize them into shelves and see detailed view. SkilledRESKAT: This Module helps SKilledRES for Automating Student Knowledge AssessmentTera X Emulator: Tera Emulator based on C#Test Tasks: Collection of completed test exercises.VG Content Display Web Part: VG Content Display Web Part is an alternative to Content Query Web Part (CQWP). It is easy to set up, uses custom XSLT file and it works with SharePoint 2010 Foundation. It allows displaying context-related content using current page metadata as filter values.vkPlayer: The standalone player for VKontakte siteWarMap Downloader: Easy way for download Warcraft 3 maps, from popular epicwar.com server. Hope you Enjoy!Web Crawler Sample: Simple solution that shows how NUnit, RhinoMock, Unity 2.0 DI container, and Parallel Extensions can play together. It is not considered as a best practice but rather aims to serve as a quick start solution.WP7Clipboard: WP7Clipboard is a library to mimic a shared clipboard on Windows Phone 7. This enables the user to copy objects from one application and post them into another without having to use a webservice/etc.????????? ?????????: "????????? ?????????" - ??? ???????, ??????????????? ????? ??????????????? ??????? ??? ??????? ??????? ????????????. ????????? ???????? ??? ?????? ? ????? ??????????? ??????? ??????? ?? ?????????? ????? ???.

    Read the article

  • Having py2exe include my data files (like include_package_data)

    - by cool-RR
    I have a Python app which includes non-Python data files in some of its subpackages. I've been using the include_package_data option in my setup.py to include all these files automatically when making distributions. It works well. Now I'm starting to use py2exe. I expected it to see that I have include_package_data=True and to include all the files. But it doesn't. It puts only my Python files in the library.zip, so my app doesn't work. How do I make py2exe include my data files?

    Read the article

  • How to extract frequency information from samples from PortAudio using FFTW in C

    - by houbysoft
    Hi all, I want to make a program that would record audio data using PortAudio (I have this part done) and then display the frequency information of that recorded audio (for now, I'd like to display the average frequency of each of the group of samples as they come in). From some research I've done, I know that I need to do an FFT. So I googled for a library to do that, in C, and found FFTW. However, now I am a little lost. What exactly am I supposed to do with the samples I recorded to extract some frequency information from them? What kind of FFT should I use (I assume I'd need a real data 1D?)? And once I'd do the FFT, how do I get the frequency information from the data it gives me? Thanks a lot in advance.

    Read the article

  • how to show legend in graphs using flot

    - by robezy
    Hi, I'm using flot library to show plot graph. I need to show the legend in a separate div. Quoted from flot api. If you want the legend to appear somewhere else in the DOM, you can specify "container" as a jQuery object/expression to put the legend table into. So i wrote the legend options as below. "legend":{"show":true,"container":"jQuery("#placeholder")"}} Unfortunately it is not showing anything? is this the correct way of writing legend option? One good thing is it not showing default legend. so i guess the problem is with way i wrote the container . Any thoughts? Thanks

    Read the article

  • Sql Server Service Broker Conversation Groups

    - by Brian Hasden
    Can someone explain conversation groups in service broker? Currently, I'm using service broker to send messages from one SQL server to another. On the sending server, I'm trying to correlate the messages so they are processed in serial on the receiving side. Based on the documentation, conversation groups seem to be a perfect fit for this, but on the receiving server, the messages get assigned to a different conversation group from the one I specified when sending the message. I've search around the web and saw that this behavior seems to be intended (http://social.msdn.microsoft.com/forums/en-US/sqlservicebroker/thread/baf48074-6804-43ab-844a-cb28a6dce02b/), but then I'm confused about the usefulness of the syntax from (http://msdn.microsoft.com/en-us/library/ms178624.aspx) WAITFOR( GET CONVERSATION GROUP @conversation_group_id FROM [dbo].[ReceiveQueue] ) If the conversation group doesn't come across with the message from the sender and messages sent with the same conversation group id don't have the same conversation group id on the receive side, what's the point of the code above?

    Read the article

  • How to consume RESTful web service in my JSF project?

    - by Nitesh Panchal
    Hello, As RESTful web services is url based and is not a object, we can't call methods on it. I have a simple web service with only one method in it with is @GET. I saw one screencast and it used some javascript library to consume the web service. But, how do i use it with my JSF project? I can't even inject it like a normal web service. Please help. I am new to REST. Can i not consume it in my managed bean? If the only way to consume the webservice is through javascript, can anybody here give me details of how to consume it through JQuery? Thanks in advance :)

    Read the article

  • Joda-Time: DateTime, DateMidnight and LocalDate usage

    - by fraido
    Joda-Time library includes different datetime classes DateTime - Immutable replacement for JDK Calendar DateMidnight - Immutable class representing a date where the time is forced to midnight LocalDateTime - Immutable class representing a local date and time (no time zone) I'm wondering how are you using these classes in your Layered Applications. I see advantages in having almost all the Interfaces using LocalDateTime (at the Service Layer at least) so that my Application doesn't have to manage Timezones and can safely assume Times always in UTC. My app could then use DateTime to manage Timezones at the very beginning of the Execution's Flow. I'm also wondering in which scenario can DateMidnight be useful.

    Read the article

  • CodePlex Daily Summary for Friday, June 21, 2013

    CodePlex Daily Summary for Friday, June 21, 2013Popular ReleasesThree-Dimensional Maneuver Gear for Minecraft: TDMG 1.1.0.0 for 1.5.2: CodePlex???(????????) ?????????(???1/4) ??????????? ?????????? ???????????(??????????) ??????????????????????? ↑????、?????????????????????(???????) ???、??????????、?????????????????????、????????1.5?????????? Shift+W(????)??????????????????10°、?10°(?????????)???MailWithAttachment: MailWithAttachment: Initial Version.Hyper-V Management Pack Extensions 2012: HyperVMPE2012: Hyper-V Management Pack Extensions 2012 Beta ReleaseOutlook 2013 Add-In: Email appointments: This new version includes the following changes: - Ability to drag emails to the calendar to create appointments. Will gather all the recipients from all the emails and create an appointment on the day you drop the emails, with the text and subject of the last selected email (if more than one selected). - Increased maximum of numbers to display appointments to 30. You will have to uninstall the previous version (add/remove programs) if you had installed it before. Before unzipping the file...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.5.2: v1.5.2 - This is a service release. We've fixed a number of issues with Tasks and IoC. We've made some consistency improvements across platforms and fixed a number of minor bugs. See changes.txt for details. Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro inversion of control container (IoC); source code...SQL Compact Query Analyzer: 1.0.1.1511: Beta build of SQL Compact Query Analyzer Bug fixes: - Resolved issue where the application crashes when loading a database that contains tables without a primary key Features: - Displays database information (database version, filename, size, creation date) - Displays schema summary (number of tables, columns, primary keys, identity fields, nullable fields) - Displays the information schema views - Displays column information (database type, clr type, max length, allows null, etc) - Support...CODE Framework: 4.0.30618.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.Toolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.18): XrmToolbox improvement Use new connection controls (use of Microsoft.Xrm.Client.dll) New display capabilities for tools (size, image and colors) Added prerequisites check Added Most Used Tools feature Tools improvementNew toolSolution Transfer Tool (v1.0.0.0) developed by DamSim Updated toolView Layout Replicator (v1.2013.6.17) Double click on source view to display its layoutXml All tools list Access Checker (v1.2013.6.17) Attribute Bulk Updater (v1.2013.6.18) FetchXml Tester (v1.2013.6.1...Media Companion: Media Companion MC3.570b: New* Movie - using XBMC TMDB - now renames movies if option selected. * Movie - using Xbmc Tmdb - Actor images saved from TMDb if option selected. Fixed* Movie - Checks for poster.jpg against missing poster filter * Movie - Fixed continual scraping of vob movie file (not DVD structure) * Both - Correctly display audio channels * Both - Correctly populate audio info in nfo's if multiple audio tracks. * Both - added icons and checked for DTS ES and Dolby TrueHD audio tracks. * Both - Stream d...LINQ Extensions Library: 1.0.4.2: New to release 1.0.4.2 Custom sorting extensions that perform up to 50% better than LINQ OrderBy, ThenBy extensions... Extensions allow for fine tuning of the sort by controlling the algorithm each sort uses.ExtJS based ASP.NET Controls: FineUI v3.3.0: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript,No CSS,No UpdatePanel,No ViewState,No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?:ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??:http://fineui.com/bbs/ ??:http://fineui.com/demo/ ??:http://fineui.com/doc/ ??:http://fineui.codeplex.com/ FineUI???? ExtJS ?????????,???? ExtJS ?。 ????? FineUI ? ExtJS ?:http://fineui.com/bbs/forum.php?mod=viewthrea...BarbaTunnel: BarbaTunnel 8.0: Check Version History for more information about this release.ExpressProfiler: ExpressProfiler v1.5: [+] added Start time, End time event columns [+] added SP:StmtStarting, SP:StmtCompleted events [*] fixed bug with Audit:Logout eventpatterns & practices: Data Access Guidance: Data Access Guidance Drop4 2013.06.17: Drop 4Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.94: add dstLine and dstCol attributes to the -Analyze output in XML mode. un-combine leftover comma-separates expression statements after optimizations are complete so downstream tools don't stack-overflow on really deep comma trees. add support for using a single source map generator instance with multiple runs of MinifyJavaScript, assuming that the results are concatenated to the same output file.Kooboo CMS: Kooboo CMS 4.1.1: The stable release of Kooboo CMS 4.1.0 with fixed the following issues: https://github.com/Kooboo/CMS/issues/1 https://github.com/Kooboo/CMS/issues/11 https://github.com/Kooboo/CMS/issues/13 https://github.com/Kooboo/CMS/issues/15 https://github.com/Kooboo/CMS/issues/19 https://github.com/Kooboo/CMS/issues/20 https://github.com/Kooboo/CMS/issues/24 https://github.com/Kooboo/CMS/issues/43 https://github.com/Kooboo/CMS/issues/45 https://github.com/Kooboo/CMS/issues/46 https://github....VidCoder: 1.5.0 Beta: The betas have started up again! If you were previously on the beta track you will need to install this to get back on it. That's because you can now run both the Beta and Stable version of VidCoder side-by-side! Note that the OpenCL and Intel QuickSync changes being tested by HandBrake are not in the betas yet. They will appear when HandBrake integrates them into the main branch. Updated HandBrake core to SVN 5590. This adds a new FDK AAC encoder. The FAAC encoder has been removed and now...Employee Info Starter Kit: v6.0 - ASP.NET MVC Edition: Release Home - Getting Started - Hands on Coding Walkthrough – Technology Stack - Design & Architecture EISK v6.0 – ASP.NET MVC edition bundles most of the greatest and successful platforms, frameworks and technologies together, to enable web developers to learn and build manageable and high performance web applications with rich user experience effectively and quickly. User End SpecificationsCreating a new employee record Read existing employee records Update an existing employee reco...OLAP PivotTable Extensions: Release 0.8.1: Use the 32-bit download for... Excel 2007 Excel 2010 32-bit (even Excel 2010 32-bit on a 64-bit operating system) Excel 2013 32-bit (even Excel 2013 32-bit on a 64-bit operating system) Use the 64-bit download for... Excel 2010 64-bit Excel 2013 64-bit Just download and run the EXE. There is no need to uninstall the previous release. If you have problems getting the add-in to work, see the Troubleshooting Installation wiki page. The new features in this release are: View #VALUE! Err...WPF Application Framework (WAF): WPF Application Framework (WAF) 3.0.0.440: Version: 3.0.0.440 (Release Candidate): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Please build the whole solution before you start one of the sample applications. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 2012) Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Samples: Use ValueConverters via StaticResource instead of x:Static. Other Downloads Downloads OverviewNew ProjectsAgileShare: Agile SharePoint DevelopmentCodeIt! © Online Compiler for 60+ programming languages: CodeIt© is a lightweight online compiler and IDE written entirely in JAVA which can be used to compile and execute program of more than 60+ programming languageEAS Web: EAS Web is a RESTful Interface/API for Exchange ActiveSync. It enables developers to use the ActiveSync protocol in a simple way with HTTP verbs.EF Generic Repository: A generic repository for Data access with : Entity Framework Unit of Work Context Factory Entropy.net: sencha extjs c# asp.net ER: Excel Reader simplified! Using OpenXML SDK 2.5 (Production Ready)Figlut Suite: Figlut Suite is a suite of applications that aim to provide an out-of-the-box data capturing solution.Ganib | Open Source project planning, collaboration & management software: Ganib is open source agile project management tool. Plan, organize and collaborate to maximize productivity. HH_ShopManager: A ECNU ProjectHyper-V Management Pack Extensions 2012: Management Pack to monitor the performance of your Hyper-V 2012 Servers and Clusters. Requires SCOM 2012 RTM or higher. SCOM 2012 SP1 recommended.IniManager: Libreria Ini C#IS2_Working Safe: Working Safe Suite Entregado como requisito para la aprobación del curso de IS2iSprite: Creates a sprite sheet and you can also add spritesKulaTools: A set of common methods that get coded once and only upgraded via copy and paste. Install into Visual Studio via nuget :)KZ.Express.H: KZ.Express.HLytLibrary: Lyt LibraryOpalineV3: simple projectPizarrón Virtual: Pizarrón virtual: Aplicación desarrollada para el dispositivo Kinect de Microsoft que simula un pizarrón para pintar. Vesion 1.0 prakark06202013Hg01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.Professionally Recover Access Database Via Access Repair Software: Sudden corruption in Microsoft Access Database Table index leads to loss of data. In such case, advance access repair software is the effective solution.ProtoBufferTools: ProtobufferTools is free and open source protobuf editor, it's can simply help you to serialize your protobuf data contract class to xml, and pack and unpack thRC5 Crypto Engine Generator: RC5 is a block cipher invented by Ron Rivest at MIT. This is a Perl script that generates VHDL code for RC5 crypto engine.SharePoint Calendar Helper: This is a library contains several entity classes and utilities to help you access SharePoint calendar items more easily and efficiently.Simple Scrum: Project Description Scrum Methodology Practices : Scrum Tool for Agile Teams Software Development **Delete the following note before publishing ** This projeSQL Deploy Anything: This project was created to create a standard tool to deploy anything to Microsoft SQL, SSIS packages, SQL scripts, and Database or SQL projects.StringFormateHelper: General Project Related to String and Date formattingSuperior Court Planning: The Superior Court Planning Web Site will be designed to lower cost to the public. test0620jean: ddtestjabbr0620MC: testVisual Studio Design Patterns add-in: This add-in catalogs and inserts software patterns in the current Visual Studio project.Web.config assembly extractor: Exctracts dlls from web config fileZebra Datepicker .Net: Zebra_Datepicker is a small, compact and highly configurable datepicker jQuery plugin, meant to enrich forms by adding the datepicker functionality to them.

    Read the article

  • How to open a .pbproj on Xcode?

    - by Sagar
    I downloaded a sample code from the MAC OSX developer library and the code is the format of a .pbproj (Project builder) and im unable to open it on xcode. I have tried the following without any luck:- 1) Rename FancyAbout.pbproj to Old.xcodeproj 2) Open Old.xcodeproj. Xcode will ask you to upgrade it. Save it as FancyAbout.xcodeproj. 3) When the project opens, choose Project Upgrade All Targets in Project to Native... to upgrade to the Xcode build system 4) Build and run. It works. I run a Mac 10.7.3 with Xcode on 4.3.2 Anyone have any suggestions on how i can get this running in xcode? Thanks in advance!

    Read the article

< Previous Page | 562 563 564 565 566 567 568 569 570 571 572 573  | Next Page >