Search Results

Search found 14736 results on 590 pages for 'common controls'.

Page 568/590 | < Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >

  • How should I delete a child object from within a parent's slot? Possibly boost::asio specific.

    - by kaliatech
    I have written a network server class that maintains a std::set of network clients. The network clients emit a signal to the network server on disconnect (via boost::bind). When a network client disconnects, the client instance needs to be removed from the Set and eventually deleted. I would think this is a common pattern, but I am having problems that might, or might not, be specific to ASIO. I've tried to trim down to just the relevant code: /** NetworkServer.hpp **/ class NetworkServices : private boost::noncopyable { public: NetworkServices(void); ~NetworkServices(void); private: void run(); void onNetworkClientEvent(NetworkClientEvent&); private: std::set<boost::shared_ptr<const NetworkClient>> clients; }; /** NetworkClient.cpp **/ void NetworkServices::run() { running = true; boost::asio::io_service::work work(io_service); //keeps service running even if no operations // This creates just one thread for the boost::asio async network services boost::thread iot(boost::bind(&NetworkServices::run_io_service, this)); while (running) { boost::system::error_code err; try { tcp::socket* socket = new tcp::socket(io_service); acceptor->accept(*socket, err); if (!err) { NetworkClient* networkClient = new NetworkClient(io_service, boost::shared_ptr<tcp::socket>(socket)); networkClient->networkClientEventSignal.connect(boost::bind(&NetworkServices::onNetworkClientEvent, this, _1)); clients.insert(boost::shared_ptr<NetworkClient>(networkClient)); networkClient->init(); //kicks off 1st asynch_read call } } // etc... } } void NetworkServices::onNetworkClientEvent(NetworkClientEvent& evt) { switch(evt.getType()) { case NetworkClientEvent::CLIENT_ERROR : { boost::shared_ptr<const NetworkClient> clientPtr = evt.getClient().getSharedPtr(); // ------ THIS IS THE MAGIC LINE ----- // If I keep this, the io_service hangs. If I comment it out, // everything works fine (but I never delete the disconnected NetworkClient). // If actually deleted the client here I might expect problems because it is the caller // of this method via boost::signal and bind. However, The clientPtr is a shared ptr, and a // reference is being kept in the client itself while signaling, so // I would the object is not going to be deleted from the heap here. That seems to be the case. // Never-the-less, this line makes all the difference, most likely because it controls whether or not the NetworkClient ever gets deleted. clients.erase(clientPtr); //I should probably put this socket clean-up in NetworkClient destructor. Regardless by doing this, // I would expect the ASIO socket stuff to be adequately cleaned-up after this. tcp::socket& socket = clientPtr->getSocket(); try { socket.shutdown(boost::asio::socket_base::shutdown_both); socket.close(); } catch(...) { CommServerContext::error("Error while shutting down and closing socket."); } break; } default : { break; } } } /** NetworkClient.hpp **/ class NetworkClient : public boost::enable_shared_from_this<NetworkClient>, Client { NetworkClient(boost::asio::io_service& io_service, boost::shared_ptr<tcp::socket> socket); virtual ~NetworkClient(void); inline boost::shared_ptr<const NetworkClient> getSharedPtr() const { return shared_from_this(); }; boost::signal <void (NetworkClientEvent&)> networkClientEventSignal; void onAsyncReadHeader(const boost::system::error_code& error, size_t bytes_transferred); }; /** NetworkClient.cpp - onAsyncReadHeader method called from io_service.run() thread as result of an async_read operation. Error condition usually result of an unexpected client disconnect.**/ void NetworkClient::onAsyncReadHeader( const boost::system::error_code& error, size_t bytes_transferred) { if (error) { //Make sure this instance doesn't get deleted from parent/slot deferencing //Alternatively, somehow schedule for future delete? boost::shared_ptr<const NetworkClient> clientPtr = getSharedPtr(); //Signal to service that this client is disconnecting NetworkClientEvent evt(*this, NetworkClientEvent::CLIENT_ERROR); networkClientEventSignal(evt); networkClientEventSignal.disconnect_all_slots(); return; } I believe it's not safe to delete the client from within the slot handler because the function return would be ... undefined? (Interestingly, it doesn't seem to blow up on me though.) So I've used boost:shared_ptr along with shared_from_this to make sure the client doesn't get deleted until all slots have been signaled. It doesn't seem to really matter though. I believe this question is not specific to ASIO, but the problem manifests in a peculiar way when using ASIO. I have one thread executing io_service.run(). All ASIO read/write operations are performed asynchronously. Everything works fine with multiple clients connecting/disconnecting UNLESS I delete my client object from the Set per the code above. If I delete my client object, the io_service seemingly deadlocks internally and no further asynchronous operations are performed unless I start another thread. I have try/catches around the io_service.run() call and have not been able to detect any errors. Questions: Are there best practices for deleting child objects, that are also signal emitters, from within parent slots? Any ideas as to why the io_service is hanging when I delete my network client object?

    Read the article

  • Does Microsoft hate firefox? ASP.Net gridview performance in firefox bug?

    - by Maxim Gershkovich
    Could someone please explain the significant difference in speed between a firefox updatepanel async postback and one performed in IE? Average Firefox Postback Time For 500 objects: 1.183 Second Average IE Postback Time For 500 objects: 0.295 Seconds Using firebug I can see that the majority of this time in FireFox is spent on the server side. A total of 1.04 seconds. Given this fact the only thing I can assume is causing this problem is the way that ASP.Net renders its controls between the two browsers. Has anyone run into this problem before? VB.Net Code Protected Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click GridView1.DataBind() End Sub Public Function GetStockList() As StockList Dim res As New StockList For l = 0 To 500 Dim x As New Stock With {.Description = "test", .ID = Guid.NewGuid} res.Add(x) Next Return res End Function Public Class Stock Private m_ID As Guid Private m_Description As String Public Sub New() End Sub Public Property ID() As Guid Get Return Me.m_ID End Get Set(ByVal value As Guid) Me.m_ID = value End Set End Property Public Property Description() As String Get Return Me.m_Description End Get Set(ByVal value As String) Me.m_Description = value End Set End Property End Class Public Class StockList Inherits List(Of Stock) End Class Markup <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <script type="text/javascript" language="Javascript"> function timestamp_class(this_current_time, this_start_time, this_end_time, this_time_difference) { this.this_current_time = this_current_time; this.this_start_time = this_start_time; this.this_end_time = this_end_time; this.this_time_difference = this_time_difference; this.GetCurrentTime = GetCurrentTime; this.StartTiming = StartTiming; this.EndTiming = EndTiming; } //Get current time from date timestamp function GetCurrentTime() { var my_current_timestamp; my_current_timestamp = new Date(); //stamp current date & time return my_current_timestamp.getTime(); } //Stamp current time as start time and reset display textbox function StartTiming() { this.this_start_time = GetCurrentTime(); //stamp current time } //Stamp current time as stop time, compute elapsed time difference and display in textbox function EndTiming() { this.this_end_time = GetCurrentTime(); //stamp current time this.this_time_difference = (this.this_end_time - this.this_start_time) / 1000; //compute elapsed time return this.this_time_difference; } //--> </script> <script type="text/javascript" language="javascript"> var time_object = new timestamp_class(0, 0, 0, 0); //create new time object and initialize it Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(BeginRequestHandler); Sys.WebForms.PageRequestManager.getInstance().add_endRequest(EndRequestHandler); function BeginRequestHandler(sender, args) { var elem = args.get_postBackElement(); ActivateAlertDiv('visible', 'divAsyncRequestTimer', elem.value + ''); time_object.StartTiming(); } function EndRequestHandler(sender, args) { ActivateAlertDiv('visible', 'divAsyncRequestTimer', '(' + time_object.EndTiming() + ' Seconds)'); } function ActivateAlertDiv(visstring, elem, msg) { var adiv = $get(elem); adiv.style.visibility = visstring; adiv.innerHTML = msg; } </script> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <Triggers> <asp:AsyncPostBackTrigger ControlID="Button1" EventName="click" /> </Triggers> <ContentTemplate> <asp:UpdateProgress ID="UpdateProgress1" runat="server" AssociatedUpdatePanelID="UpdatePanel1"> </asp:UpdateProgress> <asp:Button ID="Button1" runat="server" Text="Button" /> <div id="divAsyncRequestTimer" style="font-size:small;"> </div> <asp:GridView ID="GridView1" runat="server" DataSourceID="ObjectDataSource1" AutoGenerateColumns="False"> <Columns> <asp:BoundField DataField="ID" HeaderText="ID" SortExpression="ID" /> <asp:BoundField DataField="Description" HeaderText="Description" SortExpression="Description" /> </Columns> </asp:GridView> <asp:ObjectDataSource ID="ObjectDataSource1" runat="server" SelectMethod="GetStockList" TypeName="WebApplication1._Default"> </asp:ObjectDataSource> </ContentTemplate> </asp:UpdatePanel> </form>

    Read the article

  • Javascript: selfmade methods not working correctly

    - by hdr
    Hi everyone, I tried to figure this out for some days now, I tried to use my own object to sort of replace the global object to reduce problems with other scripts (userscripts, chrome extensions... that kind of stuff). However I can't get things to work for some reason. I tried some debugging with JSLint, the developer tools included in Google Chrome, Firebug and the integrated schript debugger in IE8 but there is no error that explains why it doesn't work at all in any browser I tried. I tried IE 8, Google Chrome 10.0.612.3 dev, Firefox 3.6.13, Safari 5.0.3 and Opera 11. So... here is the code: HTML: <!DOCTYPE HTML> <html manifest="c.manifest"> <head> <meta http-equiv="X-UA-Compatible" content="IE=edge,chrome=1"> <meta charset="utf-8"> <!--[if IE]> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/chrome-frame/1/CFInstall.min.js"></script> <script src="https://ie7-js.googlecode.com/svn/version/2.1(beta4)/IE9.js">IE7_PNG_SUFFIX=".png";</script> <![endif]--> <!--[if lt IE 9]> <script src="js/lib/excanvas.js"></script> <script src="https://html5shiv.googlecode.com/svn/trunk/html5.js"></script> <![endif]--> <script src="js/data.js"></script> </head> <body> <div id="controls"> <button onclick="MYOBJECTis.next()">Next</button> </div> <div id="textfield"></div> <canvas id="game"></canvas> </body> </html> Javascript: var that = window, it = document, k = Math.floor; var MYOBJECTis = { aresizer: function(){ // This method looks like it doesn't work. // It should automatically resize all the div elements and the body. // JSLint: no error (execpt for "'window' is not defined." which is normal since // JSLint does nor recognize references to the global object like "window" or "self" // even if you assume a browser) // Firebug: no error // Chrome dev tools: no error // IE8: that.documentElement.clientWidth is null or not an object "use strict"; var a = that.innerWidth || that.documentElement.clientWidth, d = that.innerHeight || that.documentElement.clientHeight; (function() { for(var b = 0, c = it.getElementsByTagName("div");b < c.length;b++) { c.style.width = k(c.offsetWidth) / 100 * k(a); c.style.height = k(c.offsetHight) / 100 * k(d); } }()); (function() { var b = it.getElementsByTagName("body"); b.width = a; b.height = d; }()); }, next: function(){ // This method looks like it doesn't work. // It should change the text inside a div element // JSLint: no error (execpt for "'window' is not defined.") // Firebug: no error // Chrome dev tools: no error // IE8: no error (execpt for being painfully slow) "use strict"; var b = it.getElementById("textfield"), a = [], c; switch(c !== typeof Number){ case true: a[1] = ["HI"]; c = 0; break; case false: return Error; default: b.innerHtml = a[c]; c+=1; } } }; // auto events (function(){ "use strict"; that.onresize = MYOBJECTis.aresizer(); }()); If anyone can help me out with this I would very much appreciate it. EDIT: To answer the question what's not working I can just say that no method I showed here is working at all and I don't know the cause of the problem. I also tried to clean up some of the code that has most likely nothing to do with it. Additional information is in the comments inside the code.

    Read the article

  • UI View Controller crashes after interruption

    - by nosuic
    Given the multitasking of iOS I thought it wouldn't be a pain to pause and resume my app, by pressing the home button or due to a phone call, but for a particular view controller it crashes. The navigation bar is working fine i.e. when I tap "Back" it's ok, but if I try to tap controls of the displayed UI View Controller then I get EXC_BAD_ACCESS.. =/ Please find the code of my problematic View Controller below. I'm not very sure about it myself, because I used loadView to build its View, but apart from this interruption problem it works fine. StoreViewController.h #import <UIKit/UIKit.h> @protocol StoreViewDelegate <NSObject> @optional - (void)DirectionsClicked:(double)lat:(double)lon; @end @interface StoreViewController : UIViewController { double latitude; double longitude; NSString *description; NSString *imageURL; short rating; NSString *storeType; NSString *offerType; UIImageView *imageView; UILabel *descriptionLabel; id<StoreViewDelegate> storeViewDel; } @property (nonatomic) double latitude; @property (nonatomic) double longitude; @property (nonatomic) short rating; @property (nonatomic,retain) NSString *description; @property (nonatomic,retain) NSString *imageURL; @property (nonatomic,retain) NSString *storeType; @property (nonatomic,retain) NSString *offerType; @property (assign) id<StoreViewDelegate> storeViewDel; @end StoreViewController.m #import "StoreViewController.h" #import <QuartzCore/QuartzCore.h> @interface StoreViewController() -(CGSize) calcLabelSize:(NSString *)string withFont:(UIFont *)font maxSize:(CGSize)maxSize; @end @implementation StoreViewController @synthesize storeViewDel, longitude, latitude, description, imageURL, rating, offerType, storeType; - (void)mapsButtonClicked:(id)sender { } - (void)loadView { UIView *storeView = [[UIView alloc] initWithFrame:CGRectMake(0.0f, 0.0f, 0.0f, 0.0f)]; // Colours UIColor *lightBlue = [[UIColor alloc] initWithRed:(189.0f / 255.0f) green:(230.0f / 255.0f) blue:(252.0f / 255.0f) alpha:1.0f]; UIColor *darkBlue = [[UIColor alloc] initWithRed:(28.0f/255.0f) green:(157.0f/255.0f) blue:(215.0f/255.0f) alpha:1.0f]; // Layout int width = self.navigationController.view.frame.size.width; int height = self.navigationController.view.frame.size.height; float firstRowHeight = 100.0f; int margin = width / 20; int imgWidth = (width - 3 * margin) / 2; // Set ImageView imageView = [[UIImageView alloc] initWithFrame:CGRectMake(margin, margin, imgWidth, imgWidth)]; CALayer *imgLayer = [imageView layer]; [imgLayer setMasksToBounds:YES]; [imgLayer setCornerRadius:10.0f]; [imgLayer setBorderWidth:4.0f]; [imgLayer setBorderColor:[lightBlue CGColor]]; // Load default image NSData *imageData = [NSData dataWithContentsOfFile:@"thumb-null.png"]; UIImage *image = [UIImage imageWithData:imageData]; [imageView setImage:image]; [storeView addSubview:imageView]; // Set Rating UIImageView *ratingView = [[UIImageView alloc] initWithFrame:CGRectMake(3 * width / 4 - 59.0f, margin, 118.0f, 36.0f)]; UIImage *ratingImage = [UIImage imageNamed:@"bb-rating-0.png"]; [ratingView setImage:ratingImage]; [ratingImage release]; [storeView addSubview:ratingView]; // Set Get Directions button UIButton *btn = [[UIButton alloc] initWithFrame:CGRectMake(3 * width / 4 - 71.5f, 36.0f + 2*margin, 143.0f, 63.0f)]; [btn addTarget:self action:@selector(mapsButtonClicked:) forControlEvents:UIControlEventTouchUpInside]; UIImage *mapsImgUp = [UIImage imageNamed:@"bb-maps-up.png"]; [btn setImage:mapsImgUp forState:UIControlStateNormal]; [mapsImgUp release]; UIImage *mapsImgDown = [UIImage imageNamed:@"bb-maps-down.png"]; [btn setImage:mapsImgDown forState:UIControlStateHighlighted]; [mapsImgDown release]; [storeView addSubview:btn]; [btn release]; // Set Description Text UIScrollView *descriptionView = [[UIScrollView alloc] initWithFrame:CGRectMake(0.0f, imgWidth + 2 * margin, width, height - firstRowHeight)]; descriptionView.backgroundColor = lightBlue; CGSize s = [self calcLabelSize:description withFont:[UIFont systemFontOfSize:18.0f] maxSize:CGSizeMake(width, 9999.0f)]; descriptionLabel = [[UILabel alloc] initWithFrame:CGRectMake(margin, margin, width - 2 * margin, s.height)]; descriptionLabel.lineBreakMode = UILineBreakModeWordWrap; descriptionLabel.numberOfLines = 0; descriptionLabel.font = [UIFont systemFontOfSize:18.0f]; descriptionLabel.textColor = darkBlue; descriptionLabel.text = description; descriptionLabel.backgroundColor = lightBlue; [descriptionView addSubview:descriptionLabel]; [storeView addSubview:descriptionView]; [descriptionLabel release]; [lightBlue release]; [darkBlue release]; self.view = storeView; [storeView release]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc. that aren't in use. } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [imageView release]; [descriptionLabel release]; [super dealloc]; } @end Any suggestions ? Thank you, F.

    Read the article

  • what is the wrong in this code(openAl in vc++)

    - by maiajam
    hi how are you all? i need your help i have this code #include <conio.h> #include <stdlib.h> #include <stdio.h> #include <al.h> #include <alc.h> #include <alut.h> #pragma comment(lib, "openal32.lib") #pragma comment(lib, "alut.lib") /* * These are OpenAL "names" (or "objects"). They store and id of a buffer * or a source object. Generally you would expect to see the implementation * use values that scale up from '1', but don't count on it. The spec does * not make this mandatory (as it is OpenGL). The id's can easily be memory * pointers as well. It will depend on the implementation. */ // Buffers to hold sound data. ALuint Buffer; // Sources are points of emitting sound. ALuint Source; /* * These are 3D cartesian vector coordinates. A structure or class would be * a more flexible of handling these, but for the sake of simplicity we will * just leave it as is. */ // Position of the source sound. ALfloat SourcePos[] = { 0.0, 0.0, 0.0 }; // Velocity of the source sound. ALfloat SourceVel[] = { 0.0, 0.0, 0.0 }; // Position of the Listener. ALfloat ListenerPos[] = { 0.0, 0.0, 0.0 }; // Velocity of the Listener. ALfloat ListenerVel[] = { 0.0, 0.0, 0.0 }; // Orientation of the Listener. (first 3 elements are "at", second 3 are "up") // Also note that these should be units of '1'. ALfloat ListenerOri[] = { 0.0, 0.0, -1.0, 0.0, 1.0, 0.0 }; /* * ALboolean LoadALData() * * This function will load our sample data from the disk using the Alut * utility and send the data into OpenAL as a buffer. A source is then * also created to play that buffer. */ ALboolean LoadALData() { // Variables to load into. ALenum format; ALsizei size; ALvoid* data; ALsizei freq; ALboolean loop; // Load wav data into a buffer. alGenBuffers(1, &Buffer); if(alGetError() != AL_NO_ERROR) return AL_FALSE; alutLoadWAVFile((ALbyte *)"C:\Users\Toshiba\Desktop\Graduation Project\OpenAL\open AL test\wavdata\FancyPants.wav", &format, &data, &size, &freq, &loop); alBufferData(Buffer, format, data, size, freq); alutUnloadWAV(format, data, size, freq); // Bind the buffer with the source. alGenSources(1, &Source); if(alGetError() != AL_NO_ERROR) return AL_FALSE; alSourcei (Source, AL_BUFFER, Buffer ); alSourcef (Source, AL_PITCH, 1.0 ); alSourcef (Source, AL_GAIN, 1.0 ); alSourcefv(Source, AL_POSITION, SourcePos); alSourcefv(Source, AL_VELOCITY, SourceVel); alSourcei (Source, AL_LOOPING, loop ); // Do another error check and return. if(alGetError() == AL_NO_ERROR) return AL_TRUE; return AL_FALSE; } /* * void SetListenerValues() * * We already defined certain values for the Listener, but we need * to tell OpenAL to use that data. This function does just that. */ void SetListenerValues() { alListenerfv(AL_POSITION, ListenerPos); alListenerfv(AL_VELOCITY, ListenerVel); alListenerfv(AL_ORIENTATION, ListenerOri); } /* * void KillALData() * * We have allocated memory for our buffers and sources which needs * to be returned to the system. This function frees that memory. */ void KillALData() { alDeleteBuffers(1, &Buffer); alDeleteSources(1, &Source); alutExit(); } int main(int argc, char *argv[]) { printf("MindCode's OpenAL Lesson 1: Single Static Source\n\n"); printf("Controls:\n"); printf("p) Play\n"); printf("s) Stop\n"); printf("h) Hold (pause)\n"); printf("q) Quit\n\n"); // Initialize OpenAL and clear the error bit. alutInit(NULL, 0); alGetError(); // Load the wav data. if(LoadALData() == AL_FALSE) { printf("Error loading data."); return 0; } SetListenerValues(); // Setup an exit procedure. atexit(KillALData); // Loop. ALubyte c = ' '; while(c != 'q') { c = getche(); switch(c) { // Pressing 'p' will begin playing the sample. case 'p': alSourcePlay(Source); break; // Pressing 's' will stop the sample from playing. case 's': alSourceStop(Source); break; // Pressing 'h' will pause the sample. case 'h': alSourcePause(Source); break; }; } return 0; } and it is run willbut i cant here any thing also i am new in programong and wont to program a virtual reality sound in my graduation project and start to learn opeal and vc++ but i dont how to start and from where i must begin and i want to ask if i need to learn about API win ?? and if i need how i can learn that thank you alote and i am sorry coz of my english

    Read the article

  • How to detect crashing tabed webbrowser and handle it?

    - by David Eaton
    I have a desktop application (forms) with a tab control, I assign a tab and a new custom webrowser control. I open up about 10 of these tabs. Each one visits about 100 - 500 different pages. The trouble is that if 1 webbrowser control has a problem it shuts down the entire program. I want to be able to close the offending webbrowser control and open a new one in it's place. Is there any event that I need to subscribe to catch a crashing or unresponsive webbrowser control ? I am using C# on windows 7 (Forms), .NET framework v4 =============================================================== UPDATE: 1 - The Tabbed WebBrowser Example Here is the code I have and How I use the webbrowser control in the most basic way. Create a new forms project and name it SimpleWeb Add a new class and name it myWeb.cs, here is the code to use. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Windows.Forms; using System.Security.Policy; namespace SimpleWeb { //inhert all of webbrowser class myWeb : WebBrowser { public myWeb() { //no javascript errors this.ScriptErrorsSuppressed = true; //Something we want set? AssignEvents(); } //keep near the top private void AssignEvents() { //assign WebBrowser events to our custom methods Navigated += myWeb_Navigated; DocumentCompleted += myWeb_DocumentCompleted; Navigating += myWeb_Navigating; NewWindow += myWeb_NewWindow; } #region Events //List of events:http://msdn.microsoft.com/en-us/library/system.windows.forms.webbrowser_events%28v=vs.100%29.aspx //Fired when a new windows opens private void myWeb_NewWindow(object sender, System.ComponentModel.CancelEventArgs e) { //cancel all popup windows e.Cancel = true; //beep to let you know canceled new window Console.Beep(9000, 200); } //Fired before page is navigated (not sure if its before or during?) private void myWeb_Navigating(object sender, System.Windows.Forms.WebBrowserNavigatingEventArgs args) { } //Fired after page is navigated (but not loaded) private void myWeb_Navigated(object sender, System.Windows.Forms.WebBrowserNavigatedEventArgs args) { } //Fired after page is loaded (Catch 22 - Iframes could be considered a page, can fire more than once. Ads are good examples) private void myWeb_DocumentCompleted(System.Object sender, System.Windows.Forms.WebBrowserDocumentCompletedEventArgs args) { } #endregion //Answer supplied by mo. (modified)? public void OpenUrl(string url) { try { //this.OpenUrl(url); this.Navigate(url); } catch (Exception ex) { MessageBox.Show("Your App Crashed! Because = " + ex.ToString()); //MyApplication.HandleException(ex); } } //Keep near the bottom private void RemoveEvents() { //Remove Events Navigated -= myWeb_Navigated; DocumentCompleted -= myWeb_DocumentCompleted; Navigating -= myWeb_Navigating; NewWindow -= myWeb_NewWindow; } } } On Form1 drag a standard tabControl and set the dock to fill, you can go into the tab collection and delete the pre-populated tabs if you like. Right Click on Form1 and Select "View Code" and replace it with this code. using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using mshtml; namespace SimpleWeb { public partial class Form1 : Form { public Form1() { InitializeComponent(); //Load Up 10 Tabs for (int i = 0; i <= 10; i++) { newTab("Test_" + i, "http://wwww.yahoo.com"); } } private void newTab(string Title, String Url) { //Create a new Tab TabPage newTab = new TabPage(); newTab.Name = Title; newTab.Text = Title; //create webbrowser Instance myWeb newWeb = new myWeb(); //Add webbrowser to new tab newTab.Controls.Add(newWeb); newWeb.Dock = DockStyle.Fill; //Add New Tab to Tab Pages tabControl1.TabPages.Add(newTab); newWeb.OpenUrl(Url); } } } Save and Run the project. Using the answer below by mo. , you can surf the first url with no problem, but what about all the urls the user clicks on? How do we check those? I prefer not to add events to every single html element on a page, there has to be a way to run the new urls thru the function OpenUrl before it navigates without having an endless loop. Thanks.

    Read the article

  • Preventing ListBox scrolling to top when updated

    - by WDZ
    I'm trying to build a simple music player with a ListBox playlist. When adding audio files to the playlist, it first fills the ListBox with the filenames and then (on a separate thread) extracts the ID3 data and overwrites the filenames with the correct Artist - Title information (much like Winamp). But while the ListBox is being updated, it's unscrollable, as it always jumps to the top on every item overwrite. Any way to prevent this? EDIT: The code: public Form1() { //Some initialization code omitted here BindingList<TAG_INFO> trackList = new BindingList<TAG_INFO>(); // The Playlist this.playlist = new System.Windows.Forms.ListBox(); this.playlist.Location = new System.Drawing.Point(12, 12); this.playlist.Name = "playlist"; this.playlist.Size = new System.Drawing.Size(229, 316); this.playlist.DataSource = trackList; } private void playlist_add_Click(object sender, EventArgs e) { //Initialize OpenFileDialog OpenFileDialog opd = new OpenFileDialog(); opd.Filter = "Music (*.WAV; *.MP3; *.FLAC)|*.WAV;*.MP3;*.FLAC|All files (*.*)|*.*"; opd.Title = "Select Music"; opd.Multiselect = true; //Open OpenFileDialog if (DialogResult.OK == opd.ShowDialog()) { //Add opened files to playlist for (int i = 0; opd.FileNames.Length > i; ++i) { if (File.Exists(opd.FileNames[i])) { trackList.Add(new TAG_INFO(opd.FileNames[i])); } } //Initialize BackgroundWorker BackgroundWorker _bw = new BackgroundWorker(); _bw.WorkerReportsProgress = true; _bw.DoWork += new DoWorkEventHandler(thread_trackparser_DoWork); _bw.ProgressChanged += new ProgressChangedEventHandler(_bw_ProgressChanged); //Start ID3 extraction _bw.RunWorkerAsync(); } } void thread_trackparser_DoWork(object sender, DoWorkEventArgs e) { BackgroundWorker _bw = sender as BackgroundWorker; for (int i = 0; i < trackList.Count; ++i) { //Pass extracted tag info to _bw_ProgressChanged for thread-safe playlist entry update _bw.ReportProgress(0,new object[2] {i, BassTags.BASS_TAG_GetFromFile(trackList[i].filename)}); } } void _bw_ProgressChanged(object sender, ProgressChangedEventArgs e) { object[] unboxed = e.UserState as object[]; trackList[(int)unboxed[0]] = (unboxed[1] as TAG_INFO); } EDIT2: Much simpler test case: Try scrolling down without selecting an item. The changing ListBox will scroll to the top again. using System; using System.Windows.Forms; namespace WindowsFormsApplication1 { public class Form1 : Form { private System.ComponentModel.IContainer components = null; protected override void Dispose(bool disposing) { if (disposing && (components != null)) { components.Dispose(); } base.Dispose(disposing); } private void InitializeComponent() { this.components = new System.ComponentModel.Container(); this.listBox1 = new System.Windows.Forms.ListBox(); this.timer1 = new System.Windows.Forms.Timer(this.components); this.SuspendLayout(); // listBox1 this.listBox1.FormattingEnabled = true; this.listBox1.Location = new System.Drawing.Point(0, 0); this.listBox1.Name = "listBox1"; this.listBox1.Size = new System.Drawing.Size(200, 290); // timer1 this.timer1.Enabled = true; this.timer1.Tick += new System.EventHandler(this.timer1_Tick); // Form1 this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F); this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font; this.ClientSize = new System.Drawing.Size(200, 290); this.Controls.Add(this.listBox1); this.Name = "Form1"; this.Text = "Form1"; this.ResumeLayout(false); } private System.Windows.Forms.ListBox listBox1; private System.Windows.Forms.Timer timer1; public Form1() { InitializeComponent(); for (int i = 0; i < 45; i++) listBox1.Items.Add(i); } int tickCounter = -1; private void timer1_Tick(object sender, EventArgs e) { if (++tickCounter > 44) tickCounter = 0; listBox1.Items[tickCounter] = ((int)listBox1.Items[tickCounter])+1; } } static class Program { [STAThread] static void Main() { Application.EnableVisualStyles(); Application.SetCompatibleTextRenderingDefault(false); Application.Run(new Form1()); } } }

    Read the article

  • Java AD Authentication across Trusted Domains

    - by benjiisnotcool
    I am trying to implement Active Directory authentication in Java which will be ran from a Linux machine. Our AD set-up will consist of multiple servers that share trust relationships with one another so for our test environment we have two domain controllers: test1.ad1.foo.com who trusts test2.ad2.bar.com. Using the code below I can successfully authenticate a user from test1 but not on test2: public class ADDetailsProvider implements ResultSetProvider { private String domain; private String user; private String password; public ADDetailsProvider(String user, String password) { //extract domain name if (user.contains("\\")) { this.user = user.substring((user.lastIndexOf("\\") + 1), user.length()); this.domain = user.substring(0, user.lastIndexOf("\\")); } else { this.user = user; this.domain = ""; } this.password = password; } /* Test from the command line */ public static void main (String[] argv) throws SQLException { ResultSetProvider res = processADLogin(argv[0], argv[1]); ResultSet results = null; res.assignRowValues(results, 0); System.out.println(argv[0] + " " + argv[1]); } public boolean assignRowValues(ResultSet results, int currentRow) throws SQLException { // Only want a single row if (currentRow >= 1) return false; try { ADAuthenticator adAuth = new ADAuthenticator(); LdapContext ldapCtx = adAuth.authenticate(this.domain, this.user, this.password); NamingEnumeration userDetails = adAuth.getUserDetails(ldapCtx, this.user); // Fill the result set (throws SQLException). while (userDetails.hasMoreElements()) { Attribute attr = (Attribute)userDetails.next(); results.updateString(attr.getID(), attr.get().toString()); } results.updateInt("authenticated", 1); return true; } catch (FileNotFoundException fnf) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught File Not Found Exception trying to read cris_authentication.properties"); results.updateInt("authenticated", 0); return false; } catch (IOException ioe) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught IO Excpetion processing login"); results.updateInt("authenticated", 0); return false; } catch (AuthenticationException aex) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught Authentication Exception attempting to bind to LDAP for [{0}]", this.user); results.updateInt("authenticated", 0); return true; } catch (NamingException ne) { Logger.getAnonymousLogger().log(Level.WARNING, "Caught Naming Exception performing user search or LDAP bind for [{0}]", this.user); results.updateInt("authenticated", 0); return true; } } public void close() { // nothing needed here } /** * This method is called via a Postgres function binding to access the * functionality provided by this class. */ public static ResultSetProvider processADLogin(String user, String password) { return new ADDetailsProvider(user, password); } } public class ADAuthenticator { public ADAuthenticator() throws FileNotFoundException, IOException { Properties props = new Properties(); InputStream inStream = this.getClass().getClassLoader(). getResourceAsStream("com/bar/foo/ad/authentication.properties"); props.load(inStream); this.domain = props.getProperty("ldap.domain"); inStream.close(); } public LdapContext authenticate(String domain, String user, String pass) throws AuthenticationException, NamingException, IOException { Hashtable env = new Hashtable(); this.domain = domain; env.put(Context.INITIAL_CONTEXT_FACTORY, com.sun.jndi.ldap.LdapCtxFactory); env.put(Context.PROVIDER_URL, "ldap://" + test1.ad1.foo.com + ":" + 3268); env.put(Context.SECURITY_AUTHENTICATION, simple); env.put(Context.REFERRAL, follow); env.put(Context.SECURITY_PRINCIPAL, (domain + "\\" + user)); env.put(Context.SECURITY_CREDENTIALS, pass); // Bind using specified username and password LdapContext ldapCtx = new InitialLdapContext(env, null); return ldapCtx; } public NamingEnumeration getUserDetails(LdapContext ldapCtx, String user) throws NamingException { // List of attributes to return from LDAP query String returnAttributes[] = {"ou", "sAMAccountName", "givenName", "sn", "memberOf"}; //Create the search controls SearchControls searchCtls = new SearchControls(); searchCtls.setReturningAttributes(returnAttributes); //Specify the search scope searchCtls.setSearchScope(SearchControls.SUBTREE_SCOPE); // Specify the user to search against String searchFilter = "(&(objectClass=*)(sAMAccountName=" + user + "))"; //Perform the search NamingEnumeration answer = ldapCtx.search("dc=dev4,dc=dbt,dc=ukhealth,dc=local", searchFilter, searchCtls); // Only care about the first tuple Attributes userAttributes = ((SearchResult)answer.next()).getAttributes(); if (userAttributes.size() <= 0) throw new NamingException(); return (NamingEnumeration) userAttributes.getAll(); } From what I understand of the trust relationship, if trust1 receives a login attempt for a user in trust2, then it should forward the login attempt on to it and it works this out from the user's domain name. Is this correct or am I missing something or is this not possible using the method above? --EDIT-- The stack trace from the LDAP bind is {java.naming.provider.url=ldap://test1.ad1.foo.com:3268, java.naming.factory.initial=com.sun.jndi.ldap.LdapCtxFactory, java.naming.security.authentication=simple, java.naming.referral=follow} 30-Oct-2012 13:16:02 ADDetailsProvider assignRowValues WARNING: Caught Authentication Exception attempting to bind to LDAP for [trusttest] Auth error is [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db0]

    Read the article

  • Map wont show rigth in Joomla

    - by user1653126
    I have the following code of a map using api google, I have tested the code in several html editor and its work perfectly, but when i upload in my web page doesn’t work. The map appears all zoomed in some random point in the ocean. I create an article in Joomla 1.5.20, paste the code. Its shows right in the preview but not in the web page. I disable filtering and use none editor and still won’t work. Thanks for the help. <!DOCTYPE html> <html> <head> <meta name="viewport" content="initial-scale=1.0, user-scalable=no" /> <style type="text/css"> html { height: 100% } body { height: 100%; margin: 0; padding: 0 } #map_canvas { height: 100% } </style> <script type="text/javascript" src="http://maps.googleapis.com/maps/api/js?key=AIzaSyBInlv7FuwtKGhzBP0oISDoB2Iu79HNrPU&sensor=false"> </script> <script type="text/javascript"> var map; // lets define some vars to make things easier later var kml = { a: { name: "Productor", url: "https://maps.google.hn/maps/ms?authuser=0&vps=2&hl=es&ie=UTF8&msa=0&output=kml&msid=200984447026903306654.0004c934a224eca7c3ad4" }, b: { name: "A&S", url: "https://maps.google.hn/maps/ms?ie=UTF8&authuser=0&msa=0&output=kml&msid=200984447026903306654.0004c94bac74cf2304c71" } // keep adding more if ye like }; // initialize our goo function initializeMap() { var options = { center: new google.maps.LatLng(13.324182,-87.080071), zoom: 9, mapTypeId: google.maps.MapTypeId.TERRAIN } map = new google.maps.Map(document.getElementById("map_canvas"), options); var ctaLayer = new google.maps.KmlLayer('https://maps.google.hn/maps/ms?authuser=0&vps=5&hl=es&ie=UTF8&oe=UTF8&msa=0&output=kml&msid=200984447026903306654.0004c94bc3bce6f638aa1'); ctaLayer.setMap(map); var ctaLayer = new google.maps.KmlLayer('https://maps.google.hn/maps/ms?authuser=0&vps=2&ie=UTF8&msa=0&output=kml&msid=200984447026903306654.0004c94ec7e838242b67d'); ctaLayer.setMap(map); createTogglers(); }; google.maps.event.addDomListener(window, 'load', initializeMap); // the important function... kml[id].xxxxx refers back to the top function toggleKML(checked, id) { if (checked) { var layer = new google.maps.KmlLayer(kml[id].url, { preserveViewport: true, suppressInfoWindows: true }); google.maps.event.addListener(layer, 'click', function(kmlEvent) { var text = kmlEvent.featureData.description; showInContentWindow(text); }); function showInContentWindow(text) { var sidediv = document.getElementById('content_window'); sidediv.innerHTML = text; } // store kml as obj kml[id].obj = layer; kml[id].obj.setMap(map); } else { kml[id].obj.setMap(null); delete kml[id].obj; } }; // create the controls dynamically because it's easier, really function createTogglers() { var html = "<form><ul>"; for (var prop in kml) { html += "<li id=\"selector-" + prop + "\"><input type='checkbox' id='" + prop + "'" + " onclick='highlight(this,\"selector-" + prop + "\"); toggleKML(this.checked, this.id)' \/>" + kml[prop].name + "<\/li>"; } html += "<li class='control'><a href='#' onclick='removeAll();return false;'>" + "Limpiar el Mapa<\/a><\/li>" + "<\/ul><\/form>"; document.getElementById("toggle_box").innerHTML = html; }; // easy way to remove all objects function removeAll() { for (var prop in kml) { if (kml[prop].obj) { kml[prop].obj.setMap(null); delete kml[prop].obj; } } }; // Append Class on Select function highlight(box, listitem) { var selected = 'selected'; var normal = 'normal'; document.getElementById(listitem).className = (box.checked ? selected: normal); }; </script> <style type="text/css"> .selected { font-weight: bold; } </style> </head> <body> <div id="map_canvas" style="width: 80%; height: 400px; float:left"></div> <div id="toggle_box" style="position: absolute; top: 100px; right: 640px; padding: 10px; background: #fff; z-index: 5; "></div> <div id="content_window" style="width:10%; height:10%; float:left"></div> </body> </html>

    Read the article

  • Explain to me the following VS 2010 Extension Sample code..

    - by ealshabaan
    Coders, I am building a VS 2010 extension and I am experimenting around some of the samples that came with the VS 2010 SDK. One of the sample projects is called TextAdornment. In that project there is a weirdo class that looks like the following: [Export(typeof(IWpfTextViewCreationListener))] [ContentType("text")] [TextViewRole(PredefinedTextViewRoles.Document)] internal sealed class TextAdornment1Factory : IWpfTextViewCreationListener While I was experimenting with this project, I tried to debug the project to see the flow of the program and I noticed that this class gets hit when I first start the debugging. Now my question is the following: what makes this class being the first class to get called when VS starts? In other words, why this class gets active and it runs as of some code instantiate an object of this class type? Here is the only two files in the sample project: TextAdornment1Factory.cs using System.ComponentModel.Composition; using Microsoft.VisualStudio.Text.Editor; using Microsoft.VisualStudio.Utilities; namespace TextAdornment1 { #region Adornment Factory /// /// Establishes an to place the adornment on and exports the /// that instantiates the adornment on the event of a 's creation /// [Export(typeof(IWpfTextViewCreationListener))] [ContentType("text")] [TextViewRole(PredefinedTextViewRoles.Document)] internal sealed class TextAdornment1Factory : IWpfTextViewCreationListener { /// /// Defines the adornment layer for the adornment. This layer is ordered /// after the selection layer in the Z-order /// [Export(typeof(AdornmentLayerDefinition))] [Name("TextAdornment1")] [Order(After = PredefinedAdornmentLayers.Selection, Before = PredefinedAdornmentLayers.Text)] [TextViewRole(PredefinedTextViewRoles.Document)] public AdornmentLayerDefinition editorAdornmentLayer = null; /// <summary> /// Instantiates a TextAdornment1 manager when a textView is created. /// </summary> /// <param name="textView">The <see cref="IWpfTextView"/> upon which the adornment should be placed</param> public void TextViewCreated(IWpfTextView textView) { new TextAdornment1(textView); } } #endregion //Adornment Factory } TextAdornment1.cs using System.Windows; using System.Windows.Controls; using System.Windows.Media; using Microsoft.VisualStudio.Text; using Microsoft.VisualStudio.Text.Editor; using Microsoft.VisualStudio.Text.Formatting; namespace TextAdornment1 { /// ///TextAdornment1 places red boxes behind all the "A"s in the editor window /// public class TextAdornment1 { IAdornmentLayer _layer; IWpfTextView _view; Brush _brush; Pen _pen; ITextView textView; public TextAdornment1(IWpfTextView view) { _view = view; _layer = view.GetAdornmentLayer("TextAdornment1"); textView = view; //Listen to any event that changes the layout (text changes, scrolling, etc) _view.LayoutChanged += OnLayoutChanged; _view.Closed += new System.EventHandler(_view_Closed); //selectedText(); //Create the pen and brush to color the box behind the a's Brush brush = new SolidColorBrush(Color.FromArgb(0x20, 0x00, 0x00, 0xff)); brush.Freeze(); Brush penBrush = new SolidColorBrush(Colors.Red); penBrush.Freeze(); Pen pen = new Pen(penBrush, 0.5); pen.Freeze(); _brush = brush; _pen = pen; } void _view_Closed(object sender, System.EventArgs e) { MessageBox.Show(textView.Selection.IsEmpty.ToString()); } /// <summary> /// On layout change add the adornment to any reformatted lines /// </summary> private void OnLayoutChanged(object sender, TextViewLayoutChangedEventArgs e) { foreach (ITextViewLine line in e.NewOrReformattedLines) { this.CreateVisuals(line); } } private void selectedText() { } /// <summary> /// Within the given line add the scarlet box behind the a /// </summary> private void CreateVisuals(ITextViewLine line) { //grab a reference to the lines in the current TextView IWpfTextViewLineCollection textViewLines = _view.TextViewLines; int start = line.Start; int end = line.End; //Loop through each character, and place a box around any a for (int i = start; (i < end); ++i) { if (_view.TextSnapshot[i] == 'a') { SnapshotSpan span = new SnapshotSpan(_view.TextSnapshot, Span.FromBounds(i, i + 1)); Geometry g = textViewLines.GetMarkerGeometry(span); if (g != null) { GeometryDrawing drawing = new GeometryDrawing(_brush, _pen, g); drawing.Freeze(); DrawingImage drawingImage = new DrawingImage(drawing); drawingImage.Freeze(); Image image = new Image(); image.Source = drawingImage; //Align the image with the top of the bounds of the text geometry Canvas.SetLeft(image, g.Bounds.Left); Canvas.SetTop(image, g.Bounds.Top); _layer.AddAdornment(AdornmentPositioningBehavior.TextRelative, span, null, image, null); } } } } } }

    Read the article

  • How to retrieve ID of button clicked within usercontrol on Asp.net page?

    - by Shawn Gilligan
    I have a page that I am working on that I'm linking multiple user controls to. The user control contains 3 buttons, an attach, clear and view button. When a user clicks on any control on the page, the resulting information is "dumped" into the last visible control on the page. <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="Default" MasterPageFile="DefaultPage.master" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="ajaxToolkit" %> <%@ Register tagName="FileHandler" src="FileHandling.ascx" tagPrefix="ucFile" %> <asp:Content ID="Content1" ContentPlaceHolderID="Main" Runat="Server"> <asp:UpdatePanel ID="upPanel" UpdateMode="Conditional" runat="server"> <ContentTemplate> <table> <tr> <td> <ucFile:FileHandler ID="fFile1" runat="server" /> </td> <td> <ucFile:FileHandler ID="fFile2" runat="server" /> </td> </tr> </table> </ContentTemplate> </asp:UpdatePanel> </asp:Content> All file handling and processing is handled within the control, with an event when the upload to the file server is complete via a file name that was generated. When either button is clicked, the file name is always stored internal to the control in the last control's text box. Control code: <table style="width: 50%;"> <tr style="white-space: nowrap;"> <td style="width: 1%;"> <asp:Label runat="server" ID="lblFile" /> </td> <td style="width: 20%;"> <asp:TextBox ID="txtFile" CssClass="backColor" runat="server" OnTextChanged="FileInformationChanged" /> </td> <td style="width: 1%"> <%--<asp:Button runat="server" ID="btnUpload" CssClass="btn" Text="Attach" OnClick="UploadFile"/>--%> <input type="button" id="btnUpload" class="btn" tabindex="30" value="Attach" onclick="SetupUpload();" /> </td> <td style="width: 1%"> <%--<asp:Button runat="server" ID="btnClear" Text="Clear" CssClass="btn" OnClick="ClearTextValue"/>--%> <input type="button" id="btnClearFile" class="btn" value="Clear" onclick="document.getElementById('<%=txtFile.ClientID%>').value = '';document.getElementById('<%=hfFile.ClientID%>').value = '';" /> </td> <td style="width: 1%"> <a href="#here" onclick="ViewLink(document.getElementById('<%=hfFile.ClientID%>').value, '')">View</a> </td> <td style="width: 1%"> <asp:HiddenField ID="hfFile" runat="server" /> </td> </tr> </table> <script type="text/javascript"> var ItemPath = ""; function SetupUpload(File) { ItemPath = File; VersionAttach('<%=UploadPath%>', 'true'); } function UploadComplete(File) { document.getElementById('<%=txtFile.ClientID%>').value = File.substring(File.lastIndexOf("/") + 1); document.getElementById('<%=hfFile.ClientID%>').value = File; alert('<%=txtFile.Text %>'); alert('<%=ClientID %>') } function ViewLink(File, Alert) { if (File != "") { if (File.indexOf("../data/") != -1) { window.open(File, '_blank'); } else { window.open('../data/<%=UploadPath%>/' + File, '_blank'); } } else if (Alert == "") { alert('No file has been uploaded for this field.'); } } </script>

    Read the article

  • z index background issue in IE

    - by Michael
    I have a jQuery tools scroller set up with controls managing two separate divs of info - one images, the other related text that needs to sit over the top of the images with a transparent bg image. I am using z-indexing to achieve this and am aware of IE's issues with this but am unable to sort it (tested in IE6-8). Image of the issue below: http://test.shakingpaper.com.au/not_working.png It seems that the overlayed div is taking on the containers white. Try as I might, I can't resolve this. HTML/CSS code below: <div id="content"> <div id="nav"></div> <div class="s4 slideshow"> <div> <img src="<?php bloginfo('stylesheet_directory'); ?>/images/hero_1_white.jpg" width="770" height="367" /> </div> <div> <img src="<?php bloginfo('stylesheet_directory'); ?>/images/hero_1_white.jpg" width="770" height="367" /> </div> <div> <img src="<?php bloginfo('stylesheet_directory'); ?>/images/hero_1_white.jpg" width="770" height="367" /> </div> </div> <div id="overlay_bg"></div> <div class="s4 information"> <div> <h1>Support</h1> <p>Quisque lacus quam, egestas ac tincidunt a, lacinia vel velit. Aenean facilisis nulla vitae.</p> <p><a href="#">Support Us</a></p> </div> <div> <h1>Events</h1> <p>Quisque lacegestas ac tincidunt a, lacinia vel velit. Aenean facilisis nulla vitae.</p> <p><a href="#">Read More</a></p> </div> <div> <h1>Regional</h1> <p>Quisque lacus quam, egestas ac tincidunt a, lacinia vel velit. Aenean facilisis nulla vitae.</p> <p><a href="#">Support Us</a></p> </div> </div> </div> <!-- end of content --> #content { height: auto; min-height: 300px !important; overflow: hidden; position:relative; margin-left: 27px; width: 770px; padding-bottom: 43px; } #nav { width: 60px; z-index: 10000; position: absolute; top:340px; left: 28px; } .s4 { width: 770px; height: 370px; overflow: hidden; } #nav a { background-color: transparent; background-image: url(images/transition.png); background-position: 0 0; text-indent: -1000em; width: 10px; height: 10px; display: block; float: left; margin-right: 5px; } #nav a.activeSlide { background-position: 0 -10px; } #overlay_bg { background: url(images/soild_block.png) no-repeat; width: 318px; height: 339px; z-index: 5000; position: absolute; top: 28px; } .information { position: absolute; top: 60px; left: 28px; z-index: 16000; width: 290px; height: 260px; color: #FFF; } .information h1 { font-size: 50px; font-style: italic; text-transform: uppercase; } .information p { font-size: 17px; line-height: 27px; margin-top: 37px; } .information a { font-size: 13px; padding-bottom: 2px; border-bottom: 1px solid; color: #FFF; text-transform: uppercase; font-style: italic; } .information a:hover { color: #000; } Any help would be greatly appreciated.

    Read the article

  • files get uploaded just before they get cancelled

    - by user1763986
    Got a little situation here where I am trying to cancel a file's upload. What I have done is stated that if the user clicks on the "Cancel" button, then it will simply remove the iframe so that it does not go to the page where it uploads the files into the server and inserts data into the database. Now this works fine if the user clicks on the "Cancel" button in quickish time the problem I have realised though is that if the user clicks on the "Cancel" button very late, it sometimes doesn't remove the iframe in time meaning that the file has just been uploaded just before the user has clicked on the "Cancel" button. So my question is that is there a way that if the file does somehow get uploaded before the user clicks on the "Cancel" button, that it deletes the data in the database and removes the file from the server? Below is the image upload form: <form action="imageupload.php" method="post" enctype="multipart/form-data" target="upload_target_image" onsubmit="return imageClickHandler(this);" class="imageuploadform" > <p class="imagef1_upload_process" align="center"> Loading...<br/> <img src="Images/loader.gif" /> </p> <p class="imagef1_upload_form" align="center"> <br/> <span class="imagemsg"></span> <label>Image File: <input name="fileImage" type="file" class="fileImage" /></label><br/> <br/> <label class="imagelbl"><input type="submit" name="submitImageBtn" class="sbtnimage" value="Upload" /></label> </p> <p class="imagef1_cancel" align="center"> <input type="reset" name="imageCancel" class="imageCancel" value="Cancel" /> </p> <iframe class="upload_target_image" name="upload_target_image" src="#" style="width:0px;height:0px;border:0px;solid;#fff;"></iframe> </form> Below is the jquery function which controls the "Cancel" button: $(imageuploadform).find(".imageCancel").on("click", function(event) { $('.upload_target_image').get(0).contentwindow $("iframe[name='upload_target_image']").attr("src", "javascript:'<html></html>'"); return stopImageUpload(2); }); Below is the php code where it uploads the files and inserts the data into the database. The form above posts to this php page "imageupload.php": <body> <?php include('connect.php'); session_start(); $result = 0; //uploads file move_uploaded_file($_FILES["fileImage"]["tmp_name"], "ImageFiles/" . $_FILES["fileImage"]["name"]); $result = 1; //set up the INSERT SQL query command to insert the name of the image file into the "Image" Table $imagesql = "INSERT INTO Image (ImageFile) VALUES (?)"; //prepare the above SQL statement if (!$insert = $mysqli->prepare($imagesql)) { // Handle errors with prepare operation here } //bind the parameters (these are the values that will be inserted) $insert->bind_param("s",$img); //Assign the variable of the name of the file uploaded $img = 'ImageFiles/'.$_FILES['fileImage']['name']; //execute INSERT query $insert->execute(); if ($insert->errno) { // Handle query error here } //close INSERT query $insert->close(); //Retrieve the ImageId of the last uploded file $lastID = $mysqli->insert_id; //Insert into Image_Question Table (be using last retrieved Image id in order to do this) $imagequestionsql = "INSERT INTO Image_Question (ImageId, SessionId, QuestionId) VALUES (?, ?, ?)"; //prepare the above SQL statement if (!$insertimagequestion = $mysqli->prepare($imagequestionsql)) { // Handle errors with prepare operation here echo "Prepare statement err imagequestion"; } //Retrieve the question number $qnum = (int)$_POST['numimage']; //bind the parameters (these are the values that will be inserted) $insertimagequestion->bind_param("isi",$lastID, 'Exam', $qnum); //execute INSERT query $insertimagequestion->execute(); if ($insertimagequestion->errno) { // Handle query error here } //close INSERT query $insertimagequestion->close(); ?> <!--Javascript which will output the message depending on the status of the upload (successful, failed or cancelled)--> <script> window.top.stopImageUpload(<?php echo $result; ?>, '<?php echo $_FILES['fileImage']['name'] ?>'); </script> </body> UPDATE: Below is the php code "cancelimage.php" where I want to delete the cancelled file from the server and delete the record from the database. It is set up but not finished, can somebody finish it off so I can retrieve the name of the file and it's id using $_SESSION? <?php // connect to the database include('connect.php'); /* check connection */ if (mysqli_connect_errno()) { printf("Connect failed: %s\n", mysqli_connect_error()); die(); } //remove file from server unlink("ImageFiles/...."); //need to retrieve file name here where the ... line is //DELETE query statement where it will delete cancelled file from both Image and Image Question Table $imagedeletesql = " DELETE img, img_q FROM Image AS img LEFT JOIN Image_Question AS img_q ON img_q.ImageId = img.ImageId WHERE img.ImageFile = ?"; //prepare delete query if (!$delete = $mysqli->prepare($imagedeletesql)) { // Handle errors with prepare operation here } //Dont pass data directly to bind_param store it in a variable $delete->bind_param("s",$img); //execute DELETE query $delete->execute(); if ($delete->errno) { // Handle query error here } //close query $delete->close(); ?> Can you please provide an sample code in your answer to make it easier for me. Thank you

    Read the article

  • How to specify 2 different positions for Colorbox or Fancybox on the same page?

    - by Eric
    I know this question has been asked before, but I'm having difficulty implementing it. I'm looking for a more specific answer. Here is my html code: <head> <meta charset=utf-8 /> <title>ColorBox Examples</title> <style type="text/css"> body{font:12px/1.2 Verdana, Arial, san-serrif; padding:0 10px;} a:link, a:visited{text-decoration:none; color:#416CE5; border-bottom:1px solid #416CE5;} h2{font-size:13px; margin:15px 0 0 0;} </style> <link media="screen" rel="stylesheet" href="colorbox.css" /> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script> <script src="../colorbox/jquery.colorbox.js"></script> <script> $(document).ready(function(){ //Examples of how to assign the ColorBox event to elements $(".example7").colorbox({width:"80%", height:"80%", iframe:true}); $(".example7").colorbox({width:"80%", height:"80%", iframe:true}); }); </script> </head> <body> <p><a class='example7' href="http://google.com">Outside Webpage 1 (Iframe)</a></p> <p><a class='example7' href="http://google.com">Outside Webpage 2 (Iframe)</a></p> (Excuse the wrong indentation - I had to mess with the formatting to get the body content to show up.) Here is my CSS code(default colorbox code): #colorbox, #cboxOverlay, #cboxWrapper{position:absolute; top:0; left:0; z-index:9999; overflow:hidden;} #cboxOverlay{position:fixed; width:100%; height:100%;} #cboxMiddleLeft, #cboxBottomLeft{clear:left;} #cboxContent{position:relative; overflow:visible;} #cboxLoadedContent{overflow:auto;} #cboxLoadedContent iframe{display:block; width:100%; height:100%; border:0;} #cboxTitle{margin:0;} #cboxLoadingOverlay, #cboxLoadingGraphic{position:absolute; top:0; left:0; width:100%;} #cboxPrevious, #cboxNext, #cboxClose, #cboxSlideshow{cursor:pointer;} #cboxOverlay{background:#fff;} #colorbox{} #cboxContent{margin-top:32px;} #cboxLoadedContent{background:#000; padding:1px;} #cboxLoadingGraphic{background:url(images/loading.gif) no-repeat center center;} #cboxLoadingOverlay{background:#000;} #cboxTitle{position:absolute; top:-22px; left:0; color:#000;} #cboxCurrent{position:absolute; top:-22px; right:205px; text-indent:-9999px;} #cboxSlideshow, #cboxPrevious, #cboxNext, #cboxClose{text-indent:-9999px; width:20px; height:20px; position:absolute; top:-20px; background:url(images/controls.png) no-repeat 0 0;} #cboxPrevious{background-position:0px 0px; right:44px;} #cboxPrevious.hover{background-position:0px -25px;} #cboxNext{background-position:-25px 0px; right:22px;} #cboxNext.hover{background-position:-25px -25px;} #cboxClose{background-position:-50px 0px; right:0;} #cboxClose.hover{background-position:-50px -25px;} .cboxSlideshow_on #cboxPrevious, .cboxSlideshow_off #cboxPrevious{right:66px;} .cboxSlideshow_on #cboxSlideshow{background-position:-75px -25px; right:44px;} .cboxSlideshow_on #cboxSlideshow.hover{background-position:-100px -25px;} .cboxSlideshow_off #cboxSlideshow{background-position:-100px 0px; right:44px;} .cboxSlideshow_off #cboxSlideshow.hover{background-position:-75px -25px;} Can someone please tell me how this can be achieved? Forgive my lack of css knowledge :) Any help would be greatly appreciated. Thanks a ton.

    Read the article

  • How to Configure Windows Machine to Allow File Sharing with DNS Alias

    - by Michael Ferrante
    I have not seen a single article posted anywhere online that brings together all the settings one would need to do to make this work properly on Windows, so I thought I would post it here. To facilitate failover schemes, a common technique is to use DNS CNAME records (DNS Aliases) for different machine roles. Then instead of changing the Windows computername of the actual machine name, one can switch a DNS record to point to a new host. This can work on Microsoft Windows machines, but to make it work with file sharing the following configuration steps need to be taken. Outline The Problem The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) Providing browse capabilities for multiple NetBIOS names (OptionalNames) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) References 1. The Problem On Windows machines, file sharing can work via the computer name, with or without full qualification, or by the IP Address. By default, however, filesharing will not work with arbitrary DNS aliases. To enable filesharing and other Windows services to work with DNS aliases, you must make registry changes as detailed below and reboot the machine. 2. The Solution Allowing other machines to use filesharing via the DNS Alias (DisableStrictNameChecking) This change alone will allow other machines on the network to connect to the machine using any arbitrary hostname. (However this change will not allow a machine to connect to itself via a hostname, see BackConnectionHostNames below). Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value DisableStrictNameChecking of type DWORD set to 1. Allowing server machine to use filesharing with itself via the DNS Alias (BackConnectionHostNames) This change is necessary for a DNS alias to work with filesharing from a machine to find itself. This creates the Local Security Authority host names that can be referenced in an NTLM authentication request. To do this, follow these steps for all the nodes on the client computer: To the registry subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0, add new Multi-String Value BackConnectionHostNames In the Value data box, type the CNAME or the DNS alias, that is used for the local shares on the computer, and then click OK. Note: Type each host name on a separate line. Providing browse capabilities for multiple NetBIOS names (OptionalNames) Allows ability to see the network alias in the network browse list. Edit the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters and add a value OptionalNames of type Multi-String Add in a newline delimited list of names that should be registered under the NetBIOS browse entries Names should match NetBIOS conventions (i.e. not FQDN, just hostname) Register the Kerberos service principal names (SPNs) for other Windows functions like Printing (setspn) NOTE: Should not need to do this for basic functions to work, documented here for completeness. We had one situation in which the DNS alias was not working because there was an old SPN record interfering, so if other steps aren't working check if there are any stray SPN records. You must register the Kerberos service principal names (SPNs), the host name, and the fully-qualified domain name (FQDN) for all the new DNS alias (CNAME) records. If you do not do this, a Kerberos ticket request for a DNS alias (CNAME) record may fail and return the error code KDC_ERR_S_SPRINCIPAL_UNKNOWN. To view the Kerberos SPNs for the new DNS alias records, use the Setspn command-line tool (setspn.exe). The Setspn tool is included in Windows Server 2003 Support Tools. You can install Windows Server 2003 Support Tools from the Support\Tools folder of the Windows Server 2003 startup disk. How to use the tool to list all records for a computername: setspn -L computername To register the SPN for the DNS alias (CNAME) records, use the Setspn tool with the following syntax: setspn -A host/your_ALIAS_name computername setspn -A host/your_ALIAS_name.company.com computername 3. References All the Microsoft references work via: http://support.microsoft.com/kb/ Connecting to SMB share on a Windows 2000-based computer or a Windows Server 2003-based computer may not work with an alias name Covers the basics of making file sharing work properly with DNS alias records from other computers to the server computer. KB281308 Error message when you try to access a server locally by using its FQDN or its CNAME alias after you install Windows Server 2003 Service Pack 1: "Access denied" or "No network provider accepted the given network path" Covers how to make the DNS alias work with file sharing from the file server itself. KB926642 How to consolidate print servers by using DNS alias (CNAME) records in Windows Server 2003 and in Windows 2000 Server Covers more complex scenarios in which records in Active Directory may need to be updated for certain services to work properly and for browsing for such services to work properly, how to register the Kerberos service principal names (SPNs). KB870911 Distributed File System update to support consolidation roots in Windows Server 2003 Covers even more complex scenarios with DFS (discusses OptionalNames). KB829885

    Read the article

  • Need help diagnosing network performance issues

    - by tokes
    I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

    Read the article

  • installed openstack using devstack install shell script but getting 500 error when i try opening dashboard

    - by Arvind
    I followed the instructions at http://devstack.org/guides/single-machine.html to install OpenStack. I first installed Ubuntu on my Windows 7 PC using the officially supported Windows installer for Ubuntu 12.04 LTS. And after that I followed the instructions at above page to install OpenStack. As per instructions, I should be able to access the dashboard aka Horizon, at http://192.168.1.4/ (thats the IP of the PC on which I installed Ubuntu-OpenStack). However I am getting a 500 error web page when I open that. How do I resolve this error? I want to set up a dev environment for OpenStack. For your ref, the whole error message is given now-- FilterError at / /usr/bin/env: node: No such file or directory Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Exception Type: FilterError Exception Value: /usr/bin/env: node: No such file or directory Exception Location: /usr/local/lib/python2.7/dist-packages/compressor/filters/base.py in input, line 133 Python Executable: /usr/bin/python Python Version: 2.7.3 Python Path: ['/opt/stack/horizon/openstack_dashboard/wsgi/../..', '/opt/stack/python-keystoneclient', '/opt/stack/python-novaclient', '/opt/stack/python-openstackclient', '/opt/stack/keystone', '/opt/stack/glance', '/opt/stack/python-glanceclient/setuptools_git-0.4.2-py2.7.egg', '/opt/stack/python-glanceclient', '/opt/stack/nova', '/opt/stack/horizon', '/opt/stack/cinder', '/opt/stack/python-cinderclient', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7', '/usr/lib/python2.7/plat-linux2', '/usr/lib/python2.7/lib-tk', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntu-sso-client', '/usr/lib/python2.7/dist-packages/ubuntuone-client', '/usr/lib/python2.7/dist-packages/ubuntuone-control-panel', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol', '/opt/stack/horizon/openstack_dashboard'] Server time: Sat, 27 Oct 2012 08:43:29 +0000 Error during template rendering In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 {% load compress %} 2 3 {% compress css %} 4 <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 {% endcompress %} 6 7 <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 Also, the traceback is now given below-- Environment: Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Python Version: 2.7.3 Installed Applications: ('openstack_dashboard', 'django.contrib.contenttypes', 'django.contrib.auth', 'django.contrib.sessions', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'compressor', 'horizon', 'openstack_dashboard.dashboards.project', 'openstack_dashboard.dashboards.admin', 'openstack_dashboard.dashboards.settings', 'openstack_auth') Installed Middleware: ('django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'horizon.middleware.HorizonMiddleware', 'django.middleware.doc.XViewMiddleware', 'django.middleware.locale.LocaleMiddleware') Template error: In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 : {% load compress %} 2 : 3 : {% compress css %} 4 : <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 : {% endcompress %} 6 : 7 : <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 : Traceback: File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py" in get_response 111. response = callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/vary.py" in inner_func 36. response = func(*args, **kwargs) File "/opt/stack/horizon/openstack_dashboard/wsgi/../../openstack_dashboard/views.py" in splash 38. return shortcuts.render(request, 'splash.html', {'form': form}) File "/usr/local/lib/python2.7/dist-packages/django/shortcuts/__init__.py" in render 44. return HttpResponse(loader.render_to_string(*args, **kwargs), File "/usr/local/lib/python2.7/dist-packages/django/template/loader.py" in render_to_string 176. return t.render(context_instance) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render 155. return self.render_template(self.template, context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render_template 137. output = template.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render 147. return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_compressed 107. rendered_output = self.render_output(compressor, mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_output 119. return compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 51. ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 53. return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in output 230. content = self.filter_input(forced) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in filter_input 192. for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in hunks 167. precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in precompile 210. command=command, filename=filename).input(**kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/filters/base.py" in input 133. raise FilterError(err) Exception Type: FilterError at / Exception Value: /usr/bin/env: node: No such file or directory

    Read the article

  • localhost/phpmyadmin pulls blank page

    - by Atul Modi
    When I tried configuring local machine as a Internet Gateway with website development capabilities over it and I installed all required software into it. I also had disable the selinux into it. But PROBLEM is when I do http://localhost/phpMyAdmin or all lower case than the page shows it as a blank page. I am pasting code from httpd.conf file into this as well as from phpMyAdmin.conf file I am using Fedora 16 for this. httpd.conf ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule dbd_module modules/mod_dbd.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all UserDir disabled DirectoryIndex index.html index.htm index.php AccessFileName .htaccess Order allow,deny Deny from all Satisfy All TypesConfig /etc/mime.types DefaultType text/plain MIMEMagicFile conf/magic HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ # HEADER README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-tar .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .xml AddHandler application/x-httpd-php .xml AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4.0" force-response-1.0 BrowserMatch "Java/1.0" force-response-1.0 BrowserMatch "JDK/1.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully Order allow,deny Allow from all # phpMyAdmin.conf Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Can anyone help into this area please. Urgent reply will be appreciatable because i am struggling since one and half month for this matter. thank you, Atul

    Read the article

  • All Xen domU LVM volumes corrupt after reboot

    - by zcs
    I'm running a Debian Squeeze dom0, and after rebooting it all 7 of my domUs have data corruption. Each is setup as ext3 partition directly on a separate lvm2 volume. None of the lvm volumes will mount; all have bad superblocks. I've tried e2fsck with each superblock to no avail. What else can I try? Each domU has two LVM volumes connected to it, one for the disk and one for swap. The disk is mounted at root, formatted as a normal ext3 partition as a xen-blk device. The volumes are never mounted outside of the guest OS. I'm running Ubuntu 11.04 using the instructions here. I'm not sure that they didn't shutdown properly, all I know is they were corrupt after I issues a clean 'reboot' on the dom0. Here's a sample Xen config file; the rest are the same except for name, vcpus, memory, vif and disk. name = 'load1' vcpus = 2 memory = 512 vif = ['bridge=prbr0', 'bridge=eth0'] disk = ['phy:/dev/VolGroup00/load1-disk,xvda,w','phy:/dev/VolGroup00/load1-swap,xvdb,w'] #============================================================================ # Debian Installer specific variables def check_bool(name, value): value = str(value).lower() if value in ('t', 'tr', 'tru', 'true'): return True return False global var_check_with_default def var_check_with_default(default, var, val): if val: return val return default xm_vars.var('install', use='Install Debian, default: false', check=check_bool) xm_vars.var("install-method", use='Installation method to use "cdrom" or "network" (default: network)', check=lambda var, val: var_check_with_default('network', var, val)) # install-method == "network" xm_vars.var("install-mirror", use='Debian mirror to install from (default: http://archive.ubuntu.com/ubuntu)', check=lambda var, val: var_check_with_default('http://archive.ubuntu.com/ubuntu', var, val)) xm_vars.var("install-suite", use='Debian suite to install (default: natty)', check=lambda var, val: var_check_with_default('natty', var, val)) # install-method == "cdrom" xm_vars.var("install-media", use='Installation media to use (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-cdrom-device", use='Installation media to use (default: xvdd)', check=lambda var, val: var_check_with_default('xvdd', var, val)) # Common options xm_vars.var("install-arch", use='Debian mirror to install from (default: amd64)', check=lambda var, val: var_check_with_default('amd64', var, val)) xm_vars.var("install-extra", use='Extra command line options (default: None)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-installer", use='Debian installer to use (default: network uses install-mirror; cdrom uses /install.ARCH)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-kernel", use='Debian installer kernel to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.var("install-ramdisk", use='Debian installer ramdisk to use (default: uses install-installer)', check=lambda var, val: var_check_with_default(None, var, val)) xm_vars.check() if not xm_vars.env.get('install'): bootloader="/usr/sbin/pygrub" elif xm_vars.env['install-method'] == "network": import os.path print "Install Mirror: %s" % xm_vars.env['install-mirror'] print "Install Suite: %s" % xm_vars.env['install-suite'] if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = xm_vars.env['install-mirror']+"/dists/"+xm_vars.env['install-suite'] + \ "/main/installer-"+xm_vars.env['install-arch']+"/current/images" print "Installer: %s" % installer print print "WARNING: Installer kernel and ramdisk are not authenticated." print if xm_vars.env.get('install-kernel'): kernelurl = xm_vars.env['install-kernel'] else: kernelurl = installer + "/netboot/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskurl = xm_vars.env['install-ramdisk'] else: ramdiskurl = installer + "/netboot/xen/initrd.gz" import urllib class MyUrlOpener(urllib.FancyURLopener): def http_error_default(self, req, fp, code, msg, hdrs): raise IOError("%s %s" % (code, msg)) urlopener = MyUrlOpener() try: print "Fetching %s" % kernelurl kernel, _ = urlopener.retrieve(kernelurl) print "Fetching %s" % ramdiskurl ramdisk, _ = urlopener.retrieve(ramdiskurl) except IOError, _: raise elif xm_vars.env['install-method'] == "cdrom": arch_path = { 'i386': "/install.386", 'amd64': "/install.amd" } if xm_vars.env['install-media']: print "Install Media: %s" % xm_vars.env['install-media'] else: raise OptionError("No installation media given.") if xm_vars.env['install-installer']: installer = xm_vars.env['install-installer'] else: installer = arch_path[xm_vars.env['install-arch']] print "Installer: %s" % installer if xm_vars.env.get('install-kernel'): kernelpath = xm_vars.env['install-kernel'] else: kernelpath = installer + "/xen/vmlinuz" if xm_vars.env.get('install-ramdisk'): ramdiskpath = xm_vars.env['install-ramdisk'] else: ramdiskpath = installer + "/xen/initrd.gz" disk.insert(0, 'file:%s,%s:cdrom,r' % (xm_vars.env['install-media'], xm_vars.env['install-cdrom-device'])) bootloader="/usr/sbin/pygrub" bootargs="--kernel=%s --ramdisk=%s" % (kernelpath, ramdiskpath) print "From CD" else: print "WARNING: Unknown install-method: %s." % xm_vars.env['install-method'] if xm_vars.env.get('install'): # Figure out command line if xm_vars.env['install-extra']: extras=[xm_vars.env['install-extra']] else: extras=[] # Reboot will just restart the installer since this file is not # reparsed, so halt and restart that way. extras.append("debian-installer/exit/always_halt=true") extras.append("--") extras.append("quiet") console="hvc0" try: if len(vfb) >= 1: console="tty0" except NameError, e: pass extras.append("console="+ console) extra = str.join(" ", extras) print "command line is \"%s\"" % extra root There are two LVM logical volumes connected to each VM. Here's the fdisk -l output for the disk volume: Disk /dev/VolGroup00/VMNAME-disk: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029c01 Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-disk1 1 1045 8386560 83 Linux And the swap volume: Disk /dev/VolGroup00/VMNAME-swap: 536 MB, 536870912 bytes 37 heads, 35 sectors/track, 809 cylinders Units = cylinders of 1295 * 512 = 663040 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004faae Device Boot Start End Blocks Id System /dev/VolGroup00/VMNAME-swap1 2 809 522240 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(1, 21, 19) Partition 1 has different physical/logical endings: phys=(65, 36, 35) logical=(808, 4, 28)

    Read the article

  • Deleting multiple objects in a AWS S3 bucket with s3curl.pl?

    - by user183394
    I have been trying to use the AWS "official" command line tool s3curl.pl to test out the recently announced multi-object delete. Here is what I have done: First, I tested out the s3curl.pl with a set of credentials without a hitch: $ s3curl.pl --id=s3 -- http://testbucket-0.s3.amazonaws.com/|xmllint --format - % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 884 0 884 0 0 4399 0 --:--:-- --:--:-- --:--:-- 5703 <?xml version="1.0" encoding="UTF-8"?> <ListBucketResult xmlns="http://s3.amazonaws.com/doc/2006-03-01/"> <Name>testbucket-0</Name> <Prefix/> <Marker/> <MaxKeys>1000</MaxKeys> <IsTruncated>false</IsTruncated> <Contents> <Key>file_1</Key> <LastModified>2012-03-22T17:08:17.000Z</LastModified> <ETag>"ee0e521a76524034aaa5b331842a8b4e"</ETag> <Size>400000</Size> <Owner> <ID>e6d81ea69572270e58d3814ab674df8c8f1fd5d502669633a4951bdd5185f7f4</ID> <DisplayName>zackp</DisplayName> </Owner> <StorageClass>STANDARD</StorageClass> </Contents> <Contents> <Key>file_2</Key> <LastModified>2012-03-22T17:08:19.000Z</LastModified> <ETag>"6b32cbf8219a59690a9f69ba6ff3f590"</ETag> <Size>600000</Size> <Owner> <ID>e6d81ea69572270e58d3814ab674df8c8f1fd5d502669633a4951bdd5185f7f4</ID> <DisplayName>zackp</DisplayName> </Owner> <StorageClass>STANDARD</StorageClass> </Contents> </ListBucketResult> Then, I following the s3curl.pl's usage instructions: s3curl.pl --help Usage /usr/local/bin/s3curl.pl --id friendly-name (or AWSAccessKeyId) [options] -- [curl-options] [URL] options: --key SecretAccessKey id/key are AWSAcessKeyId and Secret (unsafe) --contentType text/plain set content-type header --acl public-read use a 'canned' ACL (x-amz-acl header) --contentMd5 content_md5 add x-amz-content-md5 header --put <filename> PUT request (from the provided local file) --post [<filename>] POST request (optional local file) --copySrc bucket/key Copy from this source key --createBucket [<region>] create-bucket with optional location constraint --head HEAD request --debug enable debug logging common curl options: -H 'x-amz-acl: public-read' another way of using canned ACLs -v verbose logging Then, I tried the following, and always got back error. I would appreciated it very much if someone could point out where I made a mistake? $ s3curl.pl --id=s3 --post multi_delete.xml -- http://testbucket-0.s3.amazonaws.com/?delete <?xml version="1.0" encoding="UTF-8"?> <Error><Code>SignatureDoesNotMatch</Code><Message>The request signature we calculated does not match the signature you provided. Check your key and signing method.</Message><StringToSignBytes>50 4f 53 54 0a 0a 0a 54 68 75 2c 20 30 35 20 41 70 72 20 32 30 31 32 20 30 30 3a 35 30 3a 30 38 20 2b 30 30 30 30 0a 2f 7a 65 74 74 61 72 2d 74 2f 3f 64 65 6c 65 74 65</StringToSignBytes><RequestId>707FBE0EB4A571A8</RequestId><HostId>mP3ZwlPTcRqARQZd6gU4UvBrxGBNIVa0VVe5p0rqGmq5hM65RprwcG/qcXe+pmDT</HostId><SignatureProvided>edkNGuugiSFe0ku4eGzkh8kYgHw=</SignatureProvided><StringToSign>POST Thu, 05 Apr 2012 00:50:08 +0000 The file multi_delete.xml contains the following: cat multi_delete.xml <?xml version="1.0" encoding="UTF-8"?> <Delete> <Quiet>true</Quiet> <Object> <Key>file_1</Key> <VersionId> </VersionId>> </Object> <Object> <Key>file_2</Key> <VersionId> </VersionId> </Object> </Delete> Thanks for any help! --Zack

    Read the article

  • Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

    - by 2020mobile
    Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

    Read the article

  • Postfix "warning: cannot get RSA private key from file"

    - by phew
    I just followed this tutorial to set up a postfix mailserver with dovecot and mysql as backend for virtual users. Now I got the most parts working, I can connect to pop3 pop3s imap and imaps. Using echo TEST-MAIL | mail [email protected] works fine, when I log into my hotmail account it shows the email. It also works in reverse hence my MX entry for mydomain.com finally has been propagated, so I am being able to receive emails sent from [email protected] to [email protected] and view them in Thunderbird using STARTTLS via IMAP. Doing a bit more research after I got the error message "5.7.1 : Relay access denied" when trying to send mails to [email protected] using Thunderbird being logged into [email protected], I figured out that my server was acting as an "Open Mail Relay", which - ofcourse - is a bad thing. Digging more into the optional parts of the tutorial like shown workaround.org/comment/2536 and workaround.org/ispmail/squeeze/postfix-smtp-auth I decided to complete these steps aswell to be able to send mails via [email protected] through Mozilla Thunderbird, not getting the error message "5.7.1 : Relay access denied" anymore (as common mailservers reject open relayed emails). But now I ran into an error trying to get postfix working with SMTPS, in /var/log/mail.log it reads Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: cannot get RSA private key from file /etc/ssl/certs/postfix.pem: disabling TLS support Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:0906D06C:PEM routines:PEM_read_bio:no start line:pem_lib.c:650:Expecting: ANY PRIVATE KEY: Sep 28 17:29:34 domain postfix/smtpd[20251]: warning: TLS library problem: 20251:error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib:ssl_rsa.c:669: That error is logged right after I try to send a mail from my newly installed mailserver using SMTP SSL/TLS via port 465 in Thunderbird. Thunderbird then tells me a timeout occured. Google has a few results concerning that problem, yet I couldn't get it working with any of those. I would link some of them here but as a new user I am only allowed to use two hyperlinks. My /etc/postfix/master.cf looks like smtp inet n - - - - smtpd smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes and nmap tells me PORT STATE SERVICE [...] 465/tcp open smtps [...] my /etc/postfix/main.cf looks like smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) biff = no append_dot_mydomain = no readme_directory = no #smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem #default postfix generated #smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key #default postfix generated smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smptd_tls_key_file = /etc/ssl/private/postfix.pem smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smptd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination myhostname = mydomain.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost.com, localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf virtual_transport = dovecot dovecot_destination_recipient_limit = 1 mailbox_command = /usr/lib/dovecot/deliver The *.pem files were created like described in the tutorial above, using Postfix To create a certificate to be used by Postfix use: openssl req -new -x509 -days 3650 -nodes -out /etc/ssl/certs/postfix.pem -keyout /etc/ssl/private/postfix.pem Do not forget to set the permissions on the private key so that no unauthorized people can read it: chmod o= /etc/ssl/private/postfix.pem You will have to tell Postfix where to find your certificate and private key because by default it will look for a dummy certificate file called "ssl-cert-snakeoil": postconf -e smtpd_tls_cert_file=/etc/ssl/certs/postfix.pem postconf -e smtpd_tls_key_file=/etc/ssl/private/postfix.pem I think I don't have to include /etc/dovecot/dovecot.conf here, as login via imaps and pop3s works fine according to the logs. Only problem is making postfix properly use the self-generated, self-signed certificates. Any help appreciated! EDIT: I just tried this different tutorial on generating a self-signed certificate for postfix, still getting the same error. I really don't know what else to test. I also did check for the SSL libraries, but all seems to be fine: root@domain:~# ldd /usr/sbin/postfix linux-vdso.so.1 => (0x00007fff91b25000) libpostfix-global.so.1 => /usr/lib/libpostfix-global.so.1 (0x00007f6f8313d000) libpostfix-util.so.1 => /usr/lib/libpostfix-util.so.1 (0x00007f6f82f07000) libssl.so.0.9.8 => /usr/lib/libssl.so.0.9.8 (0x00007f6f82cb1000) libcrypto.so.0.9.8 => /usr/lib/libcrypto.so.0.9.8 (0x00007f6f82910000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00007f6f826f7000) libdb-4.8.so => /usr/lib/libdb-4.8.so (0x00007f6f8237c000) libnsl.so.1 => /lib/libnsl.so.1 (0x00007f6f82164000) libresolv.so.2 => /lib/libresolv.so.2 (0x00007f6f81f4e000) libc.so.6 => /lib/libc.so.6 (0x00007f6f81beb000) libdl.so.2 => /lib/libdl.so.2 (0x00007f6f819e7000) libz.so.1 => /usr/lib/libz.so.1 (0x00007f6f817d0000) libpthread.so.0 => /lib/libpthread.so.0 (0x00007f6f815b3000) /lib64/ld-linux-x86-64.so.2 (0x00007f6f83581000) After following Ansgar Wiechers instructions its finally working. postconf -n contained the lines as it should. The certificate/key check via openssl did show that both files are valid. So it indeed has been a permissions problem! Didn't know that chown'ing the /etc/ssl/*/postfix.pem files to postfix:postfix is not enough for postfix to read the files.

    Read the article

  • How to disable Mac OS X from using swap when there still is "Inactive" memory?

    - by Motin
    A common phenomena in my day to day usage (and several other's according to various posts throughout the internet) of OS X, the system seems to become slow whenever there is no more "Free" memory available. Supposedly, this is due to swapping, since heavy disk activity is apparent and that vm_stat reports many pageouts. (Correct me from wrong) However, the amount of "Inactive" ram is typically around 12.5%-25% of all available memory (^1.) when swapping starts/occurs/ends. According to http://support.apple.com/kb/ht1342 : Inactive memory This information in memory is not actively being used, but was recently used. For example, if you've been using Mail and then quit it, the RAM that Mail was using is marked as Inactive memory. This Inactive memory is available for use by another application, just like Free memory. However, if you open Mail before its Inactive memory is used by a different application, Mail will open quicker because its Inactive memory is converted to Active memory, instead of loading Mail from the slower hard disk. And according to http://developer.apple.com/library/mac/#documentation/Performance/Conceptual/ManagingMemory/Articles/AboutMemory.html : The inactive list contains pages that are currently resident in physical memory but have not been accessed recently. These pages contain valid data but may be released from memory at any time. So, basically: When a program has quit, it's memory becomes marked as Inactive and should be claimable at any time. Still, OS X will prefer to start swapping out memory to the Swap file instead of just claiming this memory, whenever the "Free" memory gets to low. Why? What is the advantage of this behavior over, say, instantly releasing Inactive memory and not even touch the swap file? Some sources (^2.) indicate that OS X would page out the "Inactive" memory to swap before releasing it, but that doesn't make sense now does it if the memory may be released from memory at any time? Swapping is expensive, releasing is cheap, right? Can this behavior be changed using some preference or known hack? (Preferably one that doesn't include disabling swap/dynamic_pager altogether and restarting...) I do appreciate the purge command, as well as the concept of Repairing disk permissions to force some Free memory, but those are ways to painfully force more Free memory than to actually fixing the swap/release decision logic... Btw a similar question was asked here: http://forums.macnn.com/90/mac-os-x/434650/why-does-os-x-swap-when/ and here: http://hintsforums.macworld.com/showthread.php?t=87688 but even though the OPs re-asked the core question, none of the replies addresses an answer to it... ^1. UPDATE 17-mar-2012 Since I first posted this question, I have gone from 4gb to 8gb of installed ram, and the problem remains. The amount of "Inactive" ram was 0.5gb-1.0gb before and is now typically around 1.0-2.0GB when swapping starts/occurs/ends, ie it seems that around 12.5%-25% of the ram is preserved as Inactive by osx kernel logic. ^2. For instance http://apple.stackexchange.com/questions/4288/what-does-it-mean-if-i-have-lots-of-inactive-memory-at-the-end-of-a-work-day : Once all your memory is used (free memory is 0), the OS will write out inactive memory to the swapfile to make more room in active memory. UPDATE 17-mar-2012 Here is a round-up of the methods that have been suggested to help so far: The purge command "Used to approximate initial boot conditions with a cold disk buffer cache for performance analysis. It does not affect anonymous memory that has been allocated through malloc, vm_allocate, etc". This is useful to prevent osx to swap-out the disk cache (which is ridiculous that osx actually does so in the first place), but with the downside that the disk cache is released, meaning that if the disk cache was not about to be swapped out, one would simply end up with a cold disk buffer cache, probably affecting performance negatively. The FreeMemory app and/or Repairing disk permissions to force some Free memory Doesn't help releasing any memory, only moving some gigabytes of memory contents from ram to the hd. In the end, this causes lots of swap-ins when I attempt to use the applications that were open while freeing memory, as a lot of its vm is now on swap. Speeding up swap-allocation using dynamicpagerwrapper Seems a good thing to do in order to speed up swap-usage, but does not address the problem of osx swapping in the first place while there is still inactive memory. Disabling swap by disabling dynamicpager and restarting This will force osx not to use swap to the price of the system hanging when all memory is used. Not a viable alternative... Disabling swap using a hacked dynamicpager Similar to disabling dynamicpager above, some excerpts from the comments to the blog post indicate that this is not a viable solution: "The Inactive Memory is high as usual". "when your system is running out of memory, the whole os hangs...", "if you consume the whole amount of memory of the mac, the machine will likely hang" To sum up, I am still unaware of a way of disabling Mac OS X from using swap when there still is "Inactive" memory. If it isn't possible, maybe at least there is an explanation somewhere of why osx prefers to swap out memory that may be released from memory at any time?

    Read the article

  • Open source CMS for a university department

    - by Greg Kuperberg
    I realize that this type of question gets asked over and over again. Nonetheless, I want to ask a more specific version. I'm in a university math department. Long ago our sysadmins (or just one at the time) switched to a web content management system. At the time, Zope looked like an informed choice. We have used Zope for years, but at least in my opinion, it has always been a controversial decision. At the time I didn't understand why it was so important to have a web CMS. Now I see that it certainly is important, but I don't know that it should be Zope. The good (even necessary) features of Zope for us are: It's free and Linux-based. It is a true CMS and not something else (e.g. wiki or blog) It lets you write HTML and scripts. What I really don't like about Zope is that the outcome of using it is all-or-nothing in a lot of ways. At least in convenient use, it ends up dividing the enterprise into superusers who can do everything, and lusers who can't do anything (except write their own home pages in plain HTML). It has a huge user manual, which end users won't have time to read. Somehow with the access permissions, the simple thing to do is to let a few admins access all of the source and data and that's it. Since this is a math department, the user base varies from real novices to people who understand computers reasonably well. But as it stands, any change that involves Zope has to go through the sysadmins. When the sysadmins are in a hurry, sometimes they will also just add plain HTML pages to the web site instead of using the Zope framework. It doesn't help matters that Zope is fairly disk-intensive and fairly hype-intensive. Not to dwell on Zope too much, but I am wondering what is the right web CMS for a mixed user base of terminal novices, quick studies, and experienced users. Some users might want intermediate permissions, e.g. read permission but not write permission, or permission to change some subset of the pages or see some subset of the database tables. Also it should be Linux-based and open source and a little bit scalable, and of course widely used and well-supported is a good idea. I might guess that the answer is Drupal just because that was the general answer before, but I don't know if it is the right type of CMS for this purpose. (But note that Python is a relatively popular language in a math department, among other reasons because Sage is based on Python.) I can see that I didn't completely define the question and that people are guessing what type of site it is. It is the UC Davis Math Department. The main structure of the site is not suitable for a wiki and it is also not the same thing as a course environment like Moodle. Rather, the site is mostly structured as a generic medium-small enterprise. Some components of the site could be a wiki, Moodle, LaTeX plugin, Request Tracker, etc. However, the main issue is not these components. The main issue is that it would be better to decentralize management of the site. Right now, everything that is in the Zope CMS has to go through the sysadmins. Every other user in the department either has to put in a request to them, or write their own web pages with no help from Zope. There are two main reasons for this: (1) Other people in the department don't have time to read the Zope manual. (2) It's a hassle to set up intermediate permissions in Zope. However, there are other people in the department who know how to write computer programs and use markup languages. I wouldn't want a solution that assumes that users either can't be trusted with much more than drag-and-drop, or that they are IT professionals who sleep with documentation manuals. I'm wondering if Plone/Zope still has this quality, since certainly Zope by itself does. But I also wonder sometimes if common-sense flexibility is unfashionable these days, and that things in general have be either mindlessly easy or incredibly powerful.

    Read the article

  • Unable to find valid certification path to requested target while CAS authentication

    - by Dmitriy Sukharev
    I'm trying to configure CAS authentication. It requires both CAS and client application to use HTTPS protocol. Unfortunately we should use self-signed certificate (with CN that doesn't have anything in common with our server). Also the server is behind firewall and we have only two ports (ssh and https) visible. As far as there're several application that should be visible externally, we use Apache for ajp reverse proxying requests to these applications. Secure connections are managed by Apache, and all Tomcat are not configured to work with SSL. But I obtained exception while authentication, therefore desided to set keystore in CATALINA_OPTS: export CATALINA_OPTS="-Djavax.net.ssl.keyStore=/path/to/tomcat/ssl/cert.pfx -Djavax.net.ssl.keyStoreType=PKCS12 -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyAlias=alias -Djavax.net.debug=ssl" cert.pfx was obtained from certificate and key that are used by Apache HTTP Server: $ openssl pkcs12 -export -out /path/to/tomcat/ssl/cert.pfx -inkey /path/to/apache2/ssl/server-key.pem -in /path/to/apache2/ssl/server-cert.pem When I try to authenticate a user I obtain the following exception: Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174) ~[na:1.6.0_32] at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238) ~[na:1.6.0_32] at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318) ~[na:1.6.0_32] Meanwhile I can see in catalina.out that Tomcat see certificate in cert.pfx and it's the same as the one that is used while authentication: 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Constructing validation url: https://external-ip/cas/proxyValidate?pgtUrl=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_proxyreceptor&ticket=ST-17-PN26WtdsZqNmpUBS59RC-cas&service=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_check 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. keyStore is : /path/to/tomcat/ssl/cert.pfx keyStore type is : PKCS12 keyStore provider is : init keystore init keymanager of type SunX509 *** found key for : 1 chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** trustStore is: /jdk-home-folder/jre/lib/security/cacerts Here is a lot of trusted CAs. Here is nothing related to our certicate or our (not trusted) CA. ... 09:11:39.731 [http-bio-8080-exec-4] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. Allow unsafe renegotiation: false Allow legacy hello messages: true Is initial handshake: true Is secure renegotiation: false %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 63, 239, 180, 32, 103, 140, 83, 7, 109, 149, 177, 80, 223, 79, 243, 244, 60, 191, 124, 139, 108, 5, 122, 238, 146, 1, 54, 218 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV] Compression Methods: { 0 } *** http-bio-8080-exec-4, WRITE: TLSv1 Handshake, length = 75 http-bio-8080-exec-4, WRITE: SSLv2 client hello message, length = 101 http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 81 *** ServerHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 145, 237, 232, 63, 240, 104, 234, 201, 148, 235, 12, 222, 60, 75, 174, 0, 103, 38, 196, 181, 27, 226, 243, 61, 34, 7, 107, 72 } Session ID: {79, 202, 117, 79, 130, 216, 168, 38, 68, 29, 182, 82, 16, 25, 251, 66, 93, 108, 49, 133, 92, 108, 198, 23, 120, 120, 135, 151, 15, 13, 199, 87} Cipher Suite: SSL_RSA_WITH_RC4_128_SHA Compression Method: 0 Extension renegotiation_info, renegotiated_connection: <empty> *** %% Created: [Session-2, SSL_RSA_WITH_RC4_128_SHA] ** SSL_RSA_WITH_RC4_128_SHA http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 609 *** Certificate chain chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** http-bio-8080-exec-4, SEND TLSv1 ALERT: fatal, description = certificate_unknown http-bio-8080-exec-4, WRITE: TLSv1 Alert, length = 2 http-bio-8080-exec-4, called closeSocket() http-bio-8080-exec-4, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I tried to convert our pem certificate to der format and imported it to trustedKeyStore (cacerts) (without private key), but it didn't change anything. But I'm not confident that I did it rigth. Also I must inform you that I don't know passphrase for our servier-key.pem file, and probably it differs from password for keystore created by me. OS: CentOS 6.2 Architecture: x64 Tomcat version: 7 Apache HTTP Server version: 2.4 Is there any way to make Tomcat accepts our certificate?

    Read the article

< Previous Page | 564 565 566 567 568 569 570 571 572 573 574 575  | Next Page >