Search Results

Search found 89593 results on 3584 pages for 'gupu user'.

Page 569/3584 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

• Radeon 68xx, 69xx cards and support for 10-bit color over displayport [closed]

  - by aCuria

  10-bit color, aka "Deep Color" is a scheme where 10 bits are used for each color channel. This makes for a 30 bit RGB implementation. IE: red: 10 bits green: 10 bits blue: 10 bits total: 30 bits For more information, please consult this link http://en.wikipedia.org/wiki/RGB_color_model#Beyond_truecolor:_deep_color Radeon 6000 series cards DO support deep color over HDMI, but HDMI also limits the output resolution to 1920x1200, which is not optimal. I want to know if Deep color is possible over display port with the HD6xxx series graphics cards.

  Read the article

• Windows 7 migration led to crashdump and hibernate problems

  - by MartyMacGyver

  Note: I'm using a Samsung 830 SSD (migrated OS from defunct PC) and other than these two (interrelated?) problems it's working fine. Surprisingly well actually. Motherboard is a ASUS P8Z77-V Deluxe. Problem 1: Crashdumps are not working. volmgr throws an event 45 "The system could not sucessfully load the crash dump driver." whenever you modify crashdump settings, or if a crashdump occurs. diskpart says that "Crashdump disk = no" which is peculiar. Problem 2: Hibernation isn't working. Again, volmgr throws the same event 45 if you try to hibernate. The screen blanks, then you're at the password prompt. No sleepage occurs. (Yes, I know I should avoid hibernation on SSDs but it's enabled and the hibernation file is definitely there so I'd like to know why it's failing). Diskpart claims "Hibernation file = no" which is again peculiar... it's plainly there and getting created by the system. The common factor appears to be volmgr and/or the crashdump "service" (if that's what it is). I'd much rather get this working than spend days reinstalling and reconfiguring the entire system, especially when it's working perfectly otherwise. Sleep works as well (as long as it's not hybrid sleep). So, what defines the flags "Crashdump disk" and "Hibernation file disk" in diskpart's output? And what might be going wrong that's breaking crashdumps in particular?

  Read the article

• How to insert registry entries from a .reg file into 32-bit registry, on 64-bit Windows

  - by garyo

  In 64-bit windows (Vista/7), there's HKLM/Software/Wow6432Node where all the 32-bit registry stuff is. If I have a .reg file with some keys in it, how can I tell regedit to import it into the 32-bit registry (under Wow6432Node) rather than the 64-bit registry? Even if I put the Wow6432 path into the registry keys in the .reg file, Windows "cleverly" ignores them and puts them in the main 64-bit registry.

  Read the article

• HP Compaq nc8230 hackintosh?

  - by David

  I have an HP Compaq nc8230 with a Pentium M (1.86GHz, SSE2) 1.5GB RAM, and an ATI Mobility Radeon x600 (64MB dedicated, 596MB shared). I'm trying to install Mac OS X Leopard on it. I have a legal copy of Leopard from apple, so I tried using the generic.iso and putting in the Leo DVD when it tells me to. It gets to the Apple logo with the spinny thing for maybe 5 minutes, but then the computer just restarts. I don't get past the apple logo. Then I tried using iDeneb 1.3 (10.5.5) but it doesn't boot into the DVD. My computer just ignores it and moves onto the hard drive. I would appreciate some help with either methods (moat prefferably the more legal one), I really need an intel Mac, my PowerBook G4 just doesn't cut it.

  Read the article

• Errors from ALSA during Arch Linux boot

  - by Macha

  Everytime I boot my Linux system, I get these errors while ALSA boots. Despite these, the sound still works, so these are more of an annoyance than anything. How do I stop these occuring? Unknown hardware: "HDA-Intel" "IDT 92HD73C1X5" "HDA:111d7675,10280256,00100202" "0x1028" "0x0256" Hardware is initialized using a guess method /usr/sbin/alsactl: set_control:1255: failed to obtain info for control #6 (No such file or directory) /usr/sbin/alsactl: set_control:1255: failed to obtain info for control #7 (No such file or directory)

  Read the article

• Receiving SSL certificate errors only from some clients

  - by Nico M

  I am receiving SSL certificate errors from Chrome (latest version (23.0.1271.52 beta-m) and Internet Explorer 6 (not used) on my home desktop machine (Windows XP SP2). In Firefox, it works fine on this PC. My laptop and work desktop (both Windows 7) work fine. Most SSL website checking sites report that the certificate and chain up to the root CA are setup correctly, but I have come across 2 that that say I have an invalid certificate but don't give much information on what part is failing. I know it used to work properly on this desktop (in Chrome and IE) in the past, but I'm not sure what has changed that is causing the site to fail in these browsers. Can anyone provide any assistance? This is driving me nuts! Screenshot of error:

  Read the article

• What's wrong with Lotus Notes / Lotus Domino?

  - by Anthony Gatlin

  I have a client who is using Lotus Domino for their web application/server platform. The client has two "web developers" who are more comfortable with Lotus Domino than more mainstream tools and technologies and are not enthusiastic about making a switch. I have been asked to provide an assessment of why it may be prudent to migrate to a different web application platform. I would be particularly interested in understanding deficiencies related to the platform as I have very little knowledge of Domino but am very familiar with other platforms. In addition to the fact that Apache has over 70% of web server market, IIS over 21%, and Lotus almost 0%, what other reasons would you give for moving away from this platform?

  Read the article

• Internal disk not correctly recognised by Windows 7

  - by david

  i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

  Read the article

• Windows does not recognize DVDs inserted into Blu-ray drive

  - by icemanind

  I am having a problem with a Blu-ray drive I have in my PC. Its a Blu-ray reader drive and it reads and writes CDs and DVDs. My drive has been working great for about a year now, but for some reason now, when I insert a DVD, Windows 7 doesn't recognize that there is a disc in the drive. I have to eject the disc and insert it again. I sometimes have to do this like 30 times before it "catches" and Windows 7 recognizes the disc. My discs are not scratched up. It does it even with brand new discs. I've tried about 10 different DVDs and the same problem happens. One thing that is weird though is that the problem does not seem to happen when I insert Blu-ray discs. The problem only happens with DVD discs. I tried running a drive lens cleaner. Same issue. Any suggestions?

  Read the article

• XAMPP with PostgreSQL

  - by fred smith

  I'm looking for a package like XAMPP, but instead of MySQL it would use PostgreSQL. I've done some searching and haven't turned up anything other than doing a full server setup of both.

  Read the article

• Turn off Snap and Glue in MS Visio 2007 permanently

  - by Mikhail Kupchik

  Every time I create new drawing document in Microsoft Visio 2007, drawing options "Snap" and "Glue" are turned on by default. I find both of them particularly annoying, so every time I create a new drawing I open "main menu - Tools - Snap & Glue" and turn these options off for that particular document. Is there an option or setting to turn "Snap" and "Glue" off permanently for all new Microsoft Visio 2007 drawing documents? Update: Maybe there's some way to bithack executable file (EXE or DLL) in C:\Program Files\Microsoft Office\Office12?

  Read the article

• Why sometimes Windows cannot kill a process?

  - by Néstor Sánchez A.

  Right now I'm trying to Run/Debung my app on VisualStudio, but it cannot create it because the las instance of the app.vshost.exe is still running. Then, by using the Task Manager i'm trying to kill it, but it just remains there with no signal of activity. Beyond that particular case (maybe a VS bug), i'm very curious about the technical reasons why sometimes Windows cannot kill a process??? Can, an enlighted OS related developer, please try to explain? (And please don't start a Unix/Linux/Mac battle against Windows)

  Read the article

• Why does my macbook pro have long ping times over wifi?

  - by randynov

  I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

  Read the article

• Opensuse 11.1 KDE4 Dropbox autostart issue

  - by OpensuseNewbie

  I am using KDE4 with the lastest version of opensuse, and I want to autostart everytime I turn on my computer. I followed this website: http://antrix.net/journal/techtalk/dropbox%5Fkde.html I got dropbox to work and everything is fine. I created a symlink to the dropboxd file to my ~/.kde4/AUtostart, but does not work. The command line I used to create the symlink is: ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/ I've check the symlink itself to see where it "pointed to" in it's properties, and it was the right file. The drobox-dist folder is in my /home/"username", and the dropboxd does work. I've tried using "sudo ln -s ~/.dropbox-dist/dropdoxd ~/.kde4/Autostart/" but no symlink was created. I've checked other blogs and they all say the same things to make dropbox to autostart up, yet it is not working. Does anyone know what's wrong?

  Read the article

• Make Thundirbird use and sync with Gmail Spam facility

  - by Senthil

  I am using Thundirbird 3.1.7. I am using Gmail with it. When I mark a message as spam in Thunderbird, I want it to go to Gmail's spam folder. But it is not happening. The mail is only marked as spam and stays in Gmail's inbox. How can I setup Thunderbird so that when I mark a message as spam in thundirbird, it goes to spam folder in both Thunderbird and Gmail? FYI: I have disabled Thunderbird's own adaptive spam controls so that it doesn't interfere. I am perfectly fine with Gmail's spam facility and don't want Thunderbird to add another layer of spam filtering. Still Thunderbird doesn't send emails to Gmail's spam. Update I figured that dragging and dropping the email to the spam folder in Thunderbird does the job. But is it the same as marking the email as spam in Gmail's interface? i.e. Gmail will do stuff when you mark an email as spam so that it can filter out similar messages in the future. Does it happen when I do this drag and drop thing too? Are they the same?

  Read the article

• Networked Parallel Port in Linux / KVM / QEMU

  - by korkman

  What I want to use is the "-parallel" tcp or udp option from KVM / QEMU, but I don't seem to find any server for this client. I don't serve a printer but a hardware dongle. I checked ser2net, which does provide "/dev/lp0" sharing, but it doesn't seem to work for KVM / QEMU. I suspect KVM / QEMU requires "/dev/parport0". I did rmmod lp, modprobe ppdev, linked ser2net to parport0, but it didn't work out. Perhaps ser2net is not suited for this. I tried socat as well, and I tried netcat. No success. Does anyone know any KVM / QEMU compatible parallel port server? Or did any of netcat, socat or ser2net work for you?

  Read the article

• How to transition to Comcast with static IP address

  - by steveha

  I have my own email server in my house, on a static IP address. I have had business DSL for over a decade, but I also now have Comcast business Internet. I want to transition from the DSL to the Comcast, and I have some questions. I have a domain name, my own mail server, and a firewall (a PC with two network interfaces, running Devil-Linux). I need to make sure I understand how to set up the Comcast cable box, and how to set up my firewall. First, do I need to change any settings in the cable box? Currently I have only used the cable box by plugging in a laptop, with the laptop doing DHCP. I think I can leave the box alone but I would like to make sure. Second, I'm not sure I understand the instructions Comcast gave me for setting up the firewall. My DSL provider gave me the following information: static IP address, net mask, gateway, and two DNS servers. Comcast gave me: static IP address, routable static IP address, net mask, and two DNS servers, and told me to put the "static IP address" as the "gateway" on the firewall. Is this just Comcast-speak here? Does "routable static IP address" mean the same thing as "static IP address" in my DSL setup, the end-point address that I should publish in the DNS MX records for my email server? Or should I publish the "static IP address", and Comcast will then route all its traffic over the cable box? My plan is: first, I'm going to configure another firewall, so I have one firewall for the DSL and one for the Comcast (rather than madly editing settings to switch back and forth). Then I will publish the new Comcast static IP address as a backup email server address in the DNS MX records, wait a while to let it propagate, and then switch my home over from the DSL to the Comcast. Then I'll change DNS to make that the primary mail address and the DSL the secondary, let that go a while and make sure it seems reliable. Then I'll remove the DSL from the DNS MX records completely, and finally shut down the DSL service. (I thought about keeping the DSL as a backup, but the reason I'm leaving DSL is that it has become unreliable; and I have heard that Comcast business Internet is reliable.) Final question, any advice for me? Anything you think might be useful, helpful, or educational. Thanks.

  Read the article

• Eject a USB modem in the scheduled tasks

  - by mantra

  Hi I need to schedule a task to eject a USB modem immediately when the power fail. I had searched in EventLog and found the EventID for power Failure, put it in the Triggers,but in the Action I didn't know how to put what will eject the modem. Can anybody please help me on this, I need it urgently, because my system crash on the power failure because of the USB modem. I have a UPS but I have no suitable power cable for the modem ( couldn't find one in my country ). I run win7 Ultimate

  Read the article

• MouseTerm and Terminal.app

  - by Jonatan Littke

  Hey. I'm trying to get MouseTerm to work with Terminal.app. I'm on Snow Leopard and followed the install instructions promptly (which are, simply, download the .dmg and run the 'Install' file). When I start Terminal.app, I still can't use the mouse (specifically in Vim, using set mouse=a). Anyone got it working?

  Read the article

• Creating fillable, saveable PDF in OpenOffice.org results in garbage

  - by Ubuntourist

  I've been creating beautiful fillable PDFs using OOo Writer under Ubuntu for a few years. However, I've recently been asked to make them saveable rather than just printable. So, I go to my colleague's Windows computer which has Adobe Acrobat Professional 8, and following directions outlined in Save filled form in PDF file in Ubuntu. I end up with an unreadable, unfillable document. Acrobat Reader opens it, but it's garbage. It looks like it might be a character encoding issue. The document was created using Arial under Ubuntu. I installed OOo on the Windows box and changed the font to Tahoma. But with either font, the resulting file is a jumble of boxes and oddly placed random characters. Given that it fails with a fairly ubiquitous font, and a Microsoft specific font, I'm guessing it's not a font issue. Until I enable the rights, the PDF is readable both with Acrobat Reader and Acrobat Pro. Anyone else encounter the problem? If so, did you solve it? Thanks.

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• Looking for a free bootloader

  - by jasonh

  I've heard recommendations from other people before that simply having a bootloader can make it so much easier to add and remove operating systems from my system. What is the best (preferably free) one to have?

  Read the article

• 1440 x 900 screen resolution disappeared in my Windows 7

  - by Munangiwa

  I recently bought a 19" LCD and the resolution automatically changed to 1440 x 900 when I plugged it in. I was fooling around with the resolutions then 1440 x 900 disappeared. Now I'm using 1280 x 1024, ITS BAD!! How can I get this resolution back?

  Read the article

• wierd questian this time…about win 3.1x

  - by Erez

  Can any one tell me how many processes were loaded in win 3.1x on startup? (system tasks)... Just couldn't find it anywere..i guess it is too long ago for the internet :-) 10x

  Read the article

• IE8 Download's Writing to C:\?

  - by Dana

  Every time I download something using IE8 (running on Win 7) I get asked where to save the file, I choose my downloads folder, then the download continues and when complete I get the following message: "C:\ is not accessible. Access Denied." And I so I can't access any files I download. So why on earth would IE8 be trying to write to the root, and where can I change this? I've checked the cache folder location and it's correct. Dana

  Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >