Search Results

Search found 34195 results on 1368 pages for 'try'.

Page 569/1368 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

• print job doesn't go to print queue

  - by flatsguide

  I have two printers hooked up to my intel imac. I am having a printing error. It seems that whenever i try to print (a simple text doc) I am unable to get the print job to go to print queue with one of my printers. I have a HP c7280 and a HP c3100. I am able to get one working properly, but the other doesn't seem to allow it to go to the print queue. I have switched usb cables (with the printer that I know works) and both printers are recognized by the computer in the printer preferences pane. I've tried reseting the printer system in the printer setup utility.. reloaded the drivers from HP.. etc. If anyone has a suggestion or could point me to a little help i'd be VERY grateful Best Regards.. B

  Read the article

• nginx deny directory and files to be downloaded

  - by YeppThat'sMe

  gurus. I have a problem and i dont know how to solve it. I am working with Git and Compass/SASS on some projects. Now i want to protect those directories. When i go only to the folder its all fine – i get what i expected a 403 forbidden. location ~ /\.git { deny all; } But when i try use the full path to the config file from git the browser start to download it. Same scenario with compass. There is a config.rb file within the folder which also starts to download it. How can i prevent this behaviour? How can i deny downloading specific files?

  Read the article

• Can't connect to Internet through WiFi, but can with cable

  - by aldy505

  I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

  Read the article

• Unknown Exception when entering particular keystrokes in Notepad++

  - by Dwza

  When I enter the keystrokes - in a normla file, everting works fine. When I put in <?php and save the file, use the same keystrokes again, than a unknown exception appears. If i delete <?php and try it again, everything works well again. What could this be ? I searched in the Internet, no results. I tried to reinstall all my plugins, no result. I updated my np++, no result. (On my work I use the same version. It works there!)

  Read the article

• ATI Radeon 4350 lower resolutions do not fill screen in Windows 7

  - by rlandster

  I have a new Windows 7 64-bit machine with an ATI HD4350 card. The card is connected via VGA (DSUB) to a SyncMaster 205 BW LCD monitor. If I set the resolution to 1680x1050 the LCD screen is completely filled and everything looks fine. But, if I try to set the resolution to 1280x768 (my preferred resolution) only about 2/3 of the monitor screen is used. There are large black bars above and below the image (but not on the sides). I have successfully used this monitor at the 1280x768 resolution for many years without this problem (albeit in Windows XP and a different video card). Can anyone suggest how I can get adjust things so that the entire screen is used at the 1280x768 resolution?

  Read the article

• Installing raid controller forces reinstall of Windows Server 2008

  - by Tyler

  So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

  Read the article

• Upgrade manually-installed msi by assigning software through gpo

  - by Mr Happy

  In the past I rolled out software by manually installing it on a "golden" workstation, creating an (ghost)image from that and rolling that out to the other workstations. I try not to do that any more for simple/small software, and when possible (if it's an .msi) I assign the software through gpo. I'm having a problem with one of those. The software was manually installed on the image, which was rolled out, and now I have an update for that software (new msi) and I'd like to assign it through gpo. Don't know if it's relevant but it's user assigned. The new version gets installed alongside with the old version (this is possible since the program folder is different between those versions). When I install the same msi by hand, it properly removes/upgrades the old version though. Is what I am trying to do possible?

  Read the article

• Rendering artifact when using Eclipse (FlashBuilder)

  - by Demian Brecht

  Once in a while when using FlashBuilder, I'll get a rendering artifact that doesn't go away until I do a full reboot. This artifact seems to be caused by a popup triggered by code documentation popups (hovering over keywords) that linger after the popup has been dismissed: This behavior is seemingly random and incredibly annoying. It only happens when using Eclipse (although I don't run many Java-based programs) and run an NVidia Quadro 2000M (with the latest drivers - figured I'd try that before posting). Has anyone else encountered this issue? Any known solutions?

  Read the article

• How do I allow users to execute commands via ssh without allocating a pseudo-terminal

  - by Dani El

  I need to allow users to run a limited set of commands. But not to allow them to create interactive sessions. Just like GitHub does. If you try to ssh without a command it greetings you and close the session. I can acquire this by using ForceCommand some-script But getting in some-script i then need to eval user's input. Perhaps any other NoTTY-like option in sshd_config? --- UPDATE --- i'm looking for a pure SSH / Bash solution, not Perl/Python/etc. hacks.

  Read the article

• Can't downgrade or update jailbroken iPhone

  - by showline2

  I can't update or downgrade my iPhone 3GS, Firmware 4.3.5 tethered with redsn0w. Whenever I try to update it, I get a "device isn't eligible" error. I researched on how to do that, like changing host files, but none of them worked for me. I use OS X Snow Leopard. ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 74.208.10.249 gs.apple.com This is my host file – not sure if it's the orginal one or not.

  Read the article

• Mysql refusing connection: a very special connection issue

  - by k to the z

  I have my programers remoting into a web server with windows rdp. This web server is the only machine that can access another mysql server in a secure zone. When I remote into the web server from my machine I am able to connect to the mysql server through the mysql workbench on the web server. However, when I try this same procedure from another person's computer I can get into the server via rdp. I just can't connect to mysql using the workbench. I have checked and re checked the credentials and connection information. They match. I've had other people check and re check the credentials. As far as mysql permissions are concerned this user is allowed to connect from any machine. Plus I'm remoting into the same web server. The only difference seems to be which computer is remoting into the webserver. wtf?

  Read the article

• Keyboard shortcut / navigation references

  - by jerryjvl

  I use the mouse much too freely, and my wrists are not thanking me for it. I have been meaning to try and use the keyboard more as my sole means of navigating Windows, but I am having trouble sticking with it because when I need to do something and I cannot find the right shortcut, I grab the mouse and forget to let go of it again. Personally, the main software that I need keyboard reference sheets for would be: Firefox Thunderbird Visual Studio Windows itself But I would encourage more general inclusion of shortcut references in the answers in case anyone else tries to make the same transition I am attempting ;) What I am looking for is reference material that is as comprehensive as possible so that over time I can hopefully learn to do everything with the keyboard and spare my wrists. Bonus points for references that can be printed in a reasonable size so I can keep them next to my machine in hardcopy. I know there is an answer for Windows already: Is there a definitive reference for Windows shortcuts keys?, but I am leaving it in my question in case anyone has a better printable alternative.

  Read the article

• Failing RAM, or something else?

  - by Thanatos

  I have a IBM Thinkpad T43, currently running Windows XP. Programs were crashing, XP was blue-screen-of-deathing, (more than usual) - it was basically unusable, but I couldn't get any informative error out of XP. I booted Ubuntu off a thumbdrive, which made it to the desktop, but as soon as I started to try to do anything, X segfaulted, along with several other services, followed quickly by kernel warnings and a kernel panic. I'm currently running Memtest86+ on this machine, which is spitting out numerous errors. (16k over 3 passes, and counting) The failing areas are numerous, and look something like this: 0001055da4 - XX.X MB, etc. The addresses that fail seem to cluster around 0-20 MB, 250MB, and, more rarely, 750MB, 1000MB, and 1200MB. However, a lot (but not all) of the failing addresses that I've seen end in XXXXXXX?da4 where the ? is a 1 or a 5. The machine has two sticks of RAM, one 512MB, one 1024 MB, the 512MB mapped to the lower addresses, the 1024 MB stick following. Is this indeed RAM failure, or should I consider other things before purchasing more RAM?

  Read the article

• IP not detected in terremark enteprise cloud server - how to install VMware on instance?

  - by JohnMerlino

  Using terremark enteprise cloud, when you create a server, you assigned an IP address to them and that IP is visible under Detected IP when selecting the server. However, I created a server, with IP address and I created an internet service and connected it with a node. I used protocol TCP and mapped it to port 3001. But I notice when I select my server, the IP address doesnt dsplay under Detected IP and then I VPN Connect, launch terminal and try to SSH with the IP to my server, and I get connection timed out. I presume the reason lies in that the IP address is not being detected. Someone suggested that my VMware-Tools is out of date and in fact on the server instance for VMware-Tools it does say "out of date". I'm not sure how to mount the instance and install VMware-Tools. I am using Mac OSX. Someone said that it will only work on PC running IE.

  Read the article

• No remote access to PostgreSQL db

  - by gattol

  i'm stuck in connecting to a PostresSQL database from remote host. The server is accepting incoming connections on port 5432 and i've configured pg_hba.conf like this: local all all md5 host all all 0.0.0.0/0 md5 and the postgresql.conf like this: listen_addresses = '*' port = 5432 max_connections = 100 I don't have any problem accessing from local but when i try to connect via psql with something like this: psql -U myuser -h hostname db_name I get this error: psql: FATAL: no pg_hba.conf entry for host "87.zz.yy.xxx", user "myuser", database "db_name", SSL off I also tried to put the host 87.zz.yy.xxx in the pg_hba.conf file without success.

  Read the article

• OS X: What does the '@' attribute on a file mean?

  - by claytontstanley

  On a Snow Leopard machine, at the Terminal: la ~/src/rmcl/ | grep RMCL -rw-r--r--@ 1 claytonstanley staff 6766167 Nov 13 2009 RMCL What is that '@' attribute? This file is part of an older OS X program that runs under Rosetta. I'm having issues where some older programs running under Rosetta require the @ attribute when opening files. But I'm not sure what that attribute is, so I have no way to know how to add/remove it. I did try a thorough Google search on this, but I wasn't able to find the answer. I would have thought this would be an easy one to find. Maybe the Google query isn't acting properly because of the single @ special character. Any info. is much appreciated. Thanks!

  Read the article

• How to connect to Google App Engine server in internal network iMac?

  - by Will Merydith

  I have 3 iMacs and a Windows machine on my home network, all connected via an Airport Extreme router. I'm developing Google App Engine applications locally on one of the iMacs, and can view applications using http://localhost:8080 (or whatever port I choose). How do I connect to those applications from other iMacs and Windows machines in my network? I've located the IP for the iMac hosting Google App Engine: 10.0.1.7. But when I try http://10.0.1.7:8080 from another machine it will not load the page.

  Read the article

• Can't Open Up Event Viewer

  - by Erik W

  I just installed a large backlog of Windows Updates (I have Windows 7 Ultimate 64-bit) and now a handful of programs are acting strangely (not opening, crashing, etc) I went to try to diagnose the program using the Event Viewer, but when I open it up I get the error "Microsoft Management Console has Stopped Working" immediately after I double-click on the icon. Is there any way for me to figure out what is going wrong? I have another Windows 7 PC, that I tried to remotely view the logs from, but I got the error "The RPC Server is Unavailable". I'd like to start up the service, but oh wait, I can't open anything in the "Administrative Tools". I'd like not to re-install Windows, as I had just done so a couple months ago after a Windows Update jacked up my graphics card drivers.

  Read the article

• Windows 7 migration: How to move application settings?

  - by FrustratedWithFormsDesigner

  Migrating from WindowsXP Home to Windows 7 Pro. The last bit that I'm stuck on is migrating application settings, such as the settings for Opera, Firefox, MSN Messenger, and others. On the XP system, this all seems to be in "user/Local Settings" and "user/Application Data". On the Windos 7 system, there is a "user/AppData" folder as well as "user/Application Data" and "user/Local Settings". When I try to access "Application Data" and "Local Settings" on Windows 7, I get an "Access Denied" error (even though my user is an admin). So... if I can't copy my application settings files to "Application Data" and "Local Settings" on Windows 7, where to I copy them to?

  Read the article

• VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

  - by Spirit

  Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

  Read the article

• Drupal 7 on Windows - File Module Problems

  - by TimothyP

  Installed Drupal 7 using the Web Platform installer on Windows 2008 For some reason, the file module, when you upload a file, uses the first few letters of the filename as the unique key to store in the database, which of course causes problems very fast. I'm wondering does anybody have a workaround for this? An AJAX HTTP request terminated abnormally. Debugging information follows. Path: /file/ajax/field_file/und/0/form-EBMatHzV5cZXcWvXJtdADSdyw7Id9-GIpFM_NCJg_a4 StatusText: n/a ResponseText: Error message PDOException: SQLSTATE[23000]: [Microsoft][SQL Server Native Client 10.0][SQL Server]Cannot insert duplicate key row in object 'dbo.file_managed' with unique index 'uri_unique'. in drupal_write_record() (line 6776 of ..........\includes\common.inc). Error The website encountered an unexpected error. Please try again later. ReadyState: undefined (PS: I hope superuser is the right place to ask)

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• Windows 7 'All Programs' folders self-close on right-click

  - by Madmanguruman

  Odd issue on my Windows 7 Professional (32-bit) system. If I click on the Start 'orb' then navigate to 'All Programs', then navigate to any of the folders that appear at the bottom of the list (like Accessories) and left-click, the folder contents expand with no issue. If I right-click, the context menu appears for half-a-second or so, then the popup goes away and the entire start menu dismisses. I'm not sure how to debug this issue - I'm considering using Autoruns to try and disable things hooked into the shell one-by-one. Is there a way to use a tool like Process Explorer to narrow down the process that's actually dismissing the menus?

  Read the article

• MySQL 5.0 Unavailable but still working every monday morning

  - by user1578031

  So I have a MySQL server with 4-5 databases and every monday morning, I can't login with PHPmyAdmin or the cmd line tools or options and the funny thing is the connection can be made later in the day around 3:30 - 4PM. I can't replicate the issues on any dev boxes and cant upgrade to 5.5 for a number of reasons. I want to try and poll the sql databases with a simple script and just connect to it and then disconnect. I'm not very good with SQL but would like to know if anyone could help with a script which I can automate to run sunday every 30mins or so, to see if the issue can be stopped by the database being connected to over the very quiet period of sunday... After this im out of ideas and have to wait for the HW/SW refresh to get 5.5 on there...

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >