Search Results

Search found 14292 results on 572 pages for 'high integrity systems'.

Page 57/572 | < Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >

  • BGP Router reccomendations for simple redundancy [closed]

    - by Jona
    We have two sites that each have an internet connection and have a dedicated dark fibre between them. Each site has it's own IP space and we have an AS number. We're looking to be resilient to failure of the internet connection to either site and so need to buy a pair of approriate routers. Requirements are: Able to run 2 bgp sessions (one with the ISP, one with the other site router) Option to take a full table from the upstream ISPs would be nice. Able to provide HA gateways on the LAN side (e.g. 192.168.0.254 will automatically migrate if it's host router lost power) A dedicated device rather than a server running Linux / BSD Not crazy expensive. Any help / advice much appreciated.

    Read the article

  • Should an HA failover occur in this scenario?

    - by joeqwerty
    I'm running vSphere 5 in an HA cluster across two hosts (vsphereA and vsphereB). I have the HA cluster configured for host monitoring and datastore heartbeat monitoring with admission control disabled (hopefully I rightfully understand that datastore heartbeat monitoring prevents inadvertent and unwanted HA failovers due to management network isolation). Each host has a single connection to a dedicated iSCSI network and iSCSI target (no MPIO). All vmdk's for all VM's exist on the iSCSI datastore. As a test of HA I disconnected the iSCSI connection on vsphereB and was surprised to see that the running VM's on vsphereB continued to run on vsphereB. The powered off VM's were showing as inaccessible (which I expected due to the fact that they weren't running and the connection from vsphereB to the iSCSI target was severed) but the running VM's continued to run and continued to be "owned" by vsphereB. I expected to see an HA failover occur for those VM's and expected to see them "owned" by vsphereA after the HA failover (which didn't occur). I'm at a loss to understand why an HA failover didn't occur for those VM's. Am I misunderstanding in which cases an HA failover should occur?

    Read the article

  • Suggestions on providing HA access to an external (fibre) RAID subsystem

    - by user145198
    We are looking at upgrading our storage capacity with an external RAID subsystem that has redundant (2) fibre controllers, each controller has 4 x 8 Gbps fibre ports. I would like to make access to this storage system occur via HA Linux. Ideally I would connect 2 fibre ports from each controller into each Linux server, and then export either NFS or iSCSI via a 10 Gbe interface. I have seen plenty of references to DRBD, however all of those references tend to use block storage that is solely attached to each machine, rather than having a shared block storage device, so I am unsure if DRBD could (or should) be used in this case. Ideas?

    Read the article

  • buying a computer wondering about the pit falls of haveing a 64 bit OS

    - by biladsf
    _I am getting a custom laptop, i only do .net development, i dont play games or download gbs of video/music. I just want a fast computer. Right now in order to get 8gbs of ram i have to have the 64 bit version of 7. I need to know the following: What pitfalls could i encounter. i know a lot of apps out there are not 64 bit apps and only come in 32 bit version. Business Intelligence Development Studio is a good example. _

    Read the article

  • What is the recommended glusterFS configuration for a growing website?

    - by montana
    Hello, I have a website that is tracking towards 50 million hits per day average, and within the next 3 months should be over 100 million hits per day. We are trying to use GlusterFS v 3.0.0 (with latest patches as of 1-17-2010) Currently, we've just upgraded to a load balancer environment that has 3 physical hosts with 6 Xen-Server 5.5u1 VM's (2 on each host) to serve webpage traffic. Each machine has 6 Raid-6 local storage drives (7200RPM-SATA). The old machine we came from had 1 mirrored SAS 10k drive. We also set up glusterFS currently with 3 bricks, one on each host, and it is serving the 6 VM's as clients. In testing, everything seemed fine. However when we went to production, it seemed that there just wasn't enough I/O's available to serve traffic even upwards of 15mil hits. Weeks prior, our old server was able to handle traffic, maxed out, at 20mil. Is there any recommended configurations for such an application, or things to be aware of that isn't apparent with their documentation at gluster.org for a site our size?

    Read the article

  • Good Enough Failover Strategy for DNS / MySQL / Email

    - by IMB
    I've asked and read a lot questions regarding DNS failover but the more I read the more complicated it becomes, some people say it's good enough some say it isn't. No clear answers from what I read. I was wondering if we can set it straight once and for all, at least for the requirements of most websites out there. Right now let's assume the following: We don't need really need load-balancing, what we need is a failover solution. We are running a website based on LAMP on a VPS. We need to make sure that the Web Server, MySQL, Email are always accessible if not 99%. Basically here's my idea and questions about it: Web Server: We need at least one failover server (another VPS on a separate data center). Is DNS Failover via Round Robin good, if not, what's the best? And how do you exactly implement it? How do you make the files you upload/delete on Server A is also on Server B? MySQL: I've only read a brief intro to MySQL replication and I assume that I can replicate Server A to Server B and vice versa on the fly right? So just it case Server A fails and Server B is now running, it will continue to work and replicate to Server A when it becomes available. So in essence Server B is now the primary server, and will later on failover to Server A, should a failure happen again. Email: If we are gonna use DNS Failover, using webmail or relying on emails stored on the server is probably not a good idea right? Since some emails might be on Server A while some might be on Server B? I assume a basic email forwarder to a 3rdparty is good enough (like Gmail for example) to ensure all emails are kept in one place. Here's a basic diagram for a better picture: http://i.stack.imgur.com/KWSIi.png

    Read the article

  • What does an ACPI BIOS configure during boot?

    - by RJSmith92
    When a PC boots with an ACPI BIOS, what does it exactly do? I understand that the point of ACPI is to allow the OS to control hardware resources and power management but before the OS is loaded does ACPI configure just the devices needed to boot and then let the OS configure the rest? If the OS wants to re-asign hardware resources does it store this information in the ACPI tables so that the next time the system is booted it assigns them how the OS wants? The ACPI driver asks the PCI bus driver (Pci.sys) to enumerate devices on it's bus once the OS is loaded, how are these devices configured whilst the PC is booting when it doesn't have other bus drivers? Any help with any of the above questions would be greatly appreciated. Thanks.

    Read the article

  • Install ubuntu with Win7

    - by 123Ex
    I'm using windows 7, Now I need to install Ubuntu 11.04 to the my lap top, I want keep win7 in my lap, I'm planing to keep dual boot system on my lap, I want to install Ubuntu on separate partition, I have deleted my windows empty partition to allocate the space to Ubuntu but when I'm proceeding with installation in Ubuntu, I couldn't recognize the empty partition, Ubuntu shows my full hard disk space one 50GB partition to install, I couldn't recognize the 50GB partition, can anyone tell me how to install Ubuntu on my lap. I really appreciate it, I want to install Ubuntu without loosing my existing data, to do that I have allocated empty unlocated disk space. Thank you in advance!

    Read the article

  • "Stable" operating system - what does it mean exactly?

    - by Maciej Ziarko
    I've been using Linux for more than 2 years now, and I'm a satisfied user. I started with Ubuntu, then switched to Fedora and now I'm fond of Linux Mint. Linux is often described as "stable". I have some inkling of what it might mean, but today I felt the need to understand it completely. So my question is... What does it mean that operating system is stable? What are the features of stable system?

    Read the article

  • Is it safe to run an operating system from an USB flash drive?

    - by Georg
    I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

    Read the article

  • Which Windows OS Supports 8 GB RAM in a Laptop and Suggestions for a Better Laptop for Personal & De

    - by Ellen
    I am about to purchase a laptop and have zeroed on the following two of them. Toshiba L500-ST2544 Toshiba L505-ES5034 The Common Specification for both of them are as follows - RAM - 4GB DDR3 Memory HDD - 320 GB Processor - Intel® Core™ i3-330M Processor WebCam and Mic - Available HDMI Port - Available Numeric Key Pad - Available Windows 7 (64 bit) Home Premium Now, the only difference between ST2544 and ES5034 is that, the ST2544 has a maximum of 2 slots with 2 GB in each. So, you can have a max of 4 GB RAM in that. The ES5034 can support 8 GB RAM, so, in a couple of years, if I want to add another 4 GB RAM I will be able to do it. The price for ST2544 is USD 629.00 whereas, the price for a ES5034 is USD685. A difference is USD 55.00 (not a major amount, but still something extra). Is it worthwhile going for the ES5034? Which Windows Operating System supports 8 GB of RAM?

    Read the article

  • Windows XP Activation Issues

    - by David
    Related to my older question: Get xp product key from boot Thanks for the help on that one. So, in the end, i couldn't get into my harddrive because i didn't have the available hardware to hook it up to another computer to get the old activation key. So, instead, i entered another activation key (i know, naughty) in hopes that there would be a way to retrieve the old one, restore point or something afterwords. What legal ways can I get xp re-activated after a repair when I don't have any record of my activation key? for those who think im just trying to crack it, your wrong: Got a virus, which stopped me from getting into windows Got AVG Anti Virus, which stopped me from getting into safe mode Got a 2 year old, who decided to rip-off and chew my activation sticker on my computer (nice one). Repaired windows installation thinking i wouldn't be asked to re-enter the activation key, to find that i was.

    Read the article

  • 250k connections for comet with node.js

    - by Nenad
    How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

    Read the article

  • sizes of RAM, of virtual memory and of swap for 32-bit OS

    - by Tim
    If I understand correctly, a 32-bit OS (Ubuntu) can only address 4GiB memory, so RAM with size larger than 4Gib will only be used 4Gib of itself and the rest is a waste. I am now confused about this situation for RAM with similar one for virtual memory and for swap. with virtual memory being swap + RAM, if the size of the virtual memory exceeds 4Gib, will the exceeding part be a waste for the 32-bit OS? if I now have to choose the size for my swap partition, is it a factor to consider that the 32-bit OS can only address 4GiB memory? Does the size of swap have to be chosen with respect to the 4Gib addressible limitation? Will the swap exceeding 4GiB always be a waste? is virtual memory equal to RAM and swap? or can virtual memory use space on the hard drive outside the swap partition? Thanks and regards!

    Read the article

  • How to dual OS 32-bit/64-bit Windows 7 Ultimate.

    - by Cyril Horad
    I have a problem with regards to my nVidia driver not running on 64-bit. I decided to install both 32-bit and 64-bit on my ASUS K42JC (4GB RAM upgrade) in order to function the nVidia on the 32-bit. My question is, how could I make my laptop run on either 32-bit or 64-bit OS. What options I am suppose to use, a single, double, or triple partition? From an answer: Well. When I installed the nVidia driver from either the ASUS site and the prescribed driver from NVIDA site via System Requirements Lab, both ended up freezing my laptop to the point when the desktop is about the finish booting. I have tried three(3) times reformatting and trying to fix the problem. Yet no use. I filed a ticket to the Asus support but for now no replies yet. But this bothers me, why wouldn't the nVidia run on 64bit yet it runs perfectly on 32bit.

    Read the article

  • Ubuntu Linux Utilities

    - by Wayne
    I've never used Ubuntu Linux before, but I am researching about the main system tools that are included, e.g. Windows has Disk Cleanup, Disk Defrag... but what does Ubuntu Linux have. I need to know what the main five utilities that are included on Ubuntu Linux and what do they do.

    Read the article

  • Favorite Linux Variety and why?

    - by Cenoc
    Right now I have Fedora dual booted with Windows 7. The reasoning behind that is just because windows was the first OS I ever used and has some essential software, and Fedora is the first linux distribution I tried, but I would like to hear the argument for other distros, as I may be looking to switch. Thanks ahead of time.

    Read the article

  • How to do client side NFS failover in Linux?

    - by Doug
    I have a CentOS 6.3 client that needs to access NFS storage. There are two NFS servers that serve up the same content stored on a SAN with a clustered filesystem. How do I set up CentOS to failover to the backup NFS server if needed? When I Google, I keep reading that Linux does not support this, but that would be strange since there is plenty of information out there on how to set up a clustered Linux NFS server farm...

    Read the article

  • C drive should only contain OS. Myth or fact?

    - by Fasih Khatib
    So, I have a 500GB HDD @7200RPM. It is split as: C: 97GB D: 179GB E: 188GB My belief is to keep OS ONLY in C:\ and any adamant programs that won't go anywhere apart from C:\ [because this speeds up the PC during startup process] and install programs in D:\ so that in case I have to reinstall the OS, I will have the programs readily available after reinstall. But I have begun to think this approach is flawed because if C:\ is formatted, I will lose registry values and stuff that goes in %appdata% and so it is no use keeping programs in D:/ drive because they will be useless after all. Should I go ahead and install ALL of my programs in C:\ and then use D:\ and E:\ for storing my data like photos, text files, java files n all? How will this impact the performance of the HDD? I only have 3 programs in D:\Program Files so it will be easy to reinstall them :)

    Read the article

  • Enlarging everything on 16" 1920x1080 notebook display in Windows 7

    - by Rob
    Does Windows 7 have an option to enlarge everything on the screen, e.g. via a spi setting? How well does this work? i.e. do the objects look clear when enlarged? I ask this because sometimes software that enlarges non-photographic bitmap images e.g. icons and symbols can leave them artifacted with harsh jaggier slopes and blurred lines. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I'm looking at a notebook/laptop with this spec. I've already enjoyed using a 15.4" 1920x1200 display for 5 years. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I am buying a laptop for my father who will probably prefer larger objects on the screen, although I want to provide some future proofing by allowing more on the screen if needed. I'm not interested in answers that debate the effectiveness or otherwise merits of 1920x1080 on a 16" display, please. The alternative option of 1366x768 seems too little.

    Read the article

  • Hard disk permission after bootcamp ??

    - by Sladiki
    Hi all, I have a question concerning hard disk permission after Using boot camp, i have a macbook pro 17 i7, 500gb, yesterday i installed window 7 ultimate in 80 gb (bootcamp) ntfs offcourse. I was testing my HD permission since i found that the start up is slow in mac side. I found there's alot of changes in permissions is that normal or i should to repair all this permission problems, need to mention that from Windows side i can see my mac drive which i don't want... Any idea... Regards, Sami

    Read the article

< Previous Page | 53 54 55 56 57 58 59 60 61 62 63 64  | Next Page >