Search Results

Search found 17063 results on 683 pages for 'window restore'.

Page 570/683 | < Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >

• multiple ip for a server not reachable

  - by andrewk

  FYI: I've read everything on Serverfault related to this question and have faced a different issue. Simply put, I've got one server (apache2) with couple of sites on it. It currently has 1 ip. I'm trying to assign/add another ip to that server, so I can give each site a different ip for ssl purposes. I am not lucking out. The new ip simply is unreachable, I've pinged it. This is what I've got below, what am I doing wrong. auto lo iface lo inet loopback auto eth0 eth0:0 eth0:1 iface eth0 inet static address 70.116.5.244 netmask 255.255.255.0 gateway 70.116.5.1 #THE NEW IP iface eth0:0 inet static address 26.175.217.102 netmask 255.255.255.0 #PRIVATE IP iface eth0:1 inet static address 192.168.158.88 netmask 255.255.128.0 NOTE: THESE IP'S ARE TWEAKED BUT RELATIVE I've read many questions here 90% similar to this but most actually have the IP respond, not this case. Thanks netstar -r output Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface default gw-u6.linode.co 0.0.0.0 UG 0 0 0 eth0 70.116.5.0 * 255.255.255.0 U 0 0 0 eth0 26.175.217.0 * 255.255.255.0 U 0 0 0 eth0 192.168.128.0 * 255.255.128.0 U 0 0 0 eth0

  Read the article

• Why would my HDD main partition suddenly become hidden?

  - by Luis Oscar

  A few days ago I was using my computer as usual and I turned it off. The next day it wouldn't boot up. It just stayed after the hardware diagnostic window on the intermittent underscore screen. So clearly It wasn't booting up. I tried turning it on and off a couple of times with no avail. Finally I used windows 7 disk and it seemed as if there was no HDD. not even the installation would see the HDD. So i thought it was dead, i bought a new one installed it with windows and used a external case with the old HDD. plug it in and still couldn't see it. I finally downloaded a partition program EASUS or something and my HDD was there listed WITHOUT a system letter. I could however explore it and i set it as Unhidden and it came back to life. I could see it normally. I really just wish someone could explain to me what happened here, was it a virus? does it means the HDD is about to die? How can i prevent this or what should I do now? should i stop using this OLD HDD? Thanks

  Read the article

• How can I find out which processes on my computer are accessing the microphone?

  - by Vinayak

  After reading this interesting Lifehacker post and reading the comments on the page, one person was wondering if it would be possible to use the Physical Device Object Names of other hardware such as the microphone to find out the names of processes using that device. I tried the same approach, but so far it only seems to work for the webcam. Is there any other way I could get this to work in Process Explorer? UPDATE: The Lifehacker post was about finding out which Windows process is currently using your webcam. This is how they went about doing it: Start Device Manager (WIN+R → "devmgmt.msc" → OK) Find your webcam among the list of devices (check under Imaging Devices) Open the properties window of the device and switch to the Details tab (Right click → Properties → Details) In the dropdown menu, select Physical Device Object Name and copy the string(Right click → Copy) Download Process Explorer Make sure you have opened Process Explorer in Administrator Mode(File → Show Details for All Processes) Hit CTRL+F and enter the string you copied earlier(it should be something like \Device\000000XX) Hit the Search button and you should see a list of processes using the webcam(if there are any)

  Read the article

• RAID1 rebuild fails due to disk errors

  - by overlord_tm

  Quick info: Dell R410 with 2x500GB drives in RAID1 on H700 Adapter Recently one of drives in RAID1 array on server failed, lets call it Drive 0. RAID controller marked it as fault and put it offline. I replaced faulty disk with new one (same series and manufacturer, just bigger) and configured new disk as hot spare. Rebuild from Drive1 started immediately and after 1.5 hour I got message that Drive 1 failed. Server was unresponsive (kernel panic) and required reboot. Given that half hour before this error rebuild was at about 40%, I estimated that new drive is not in sync yet and tried to reboot just with Drive 1. RAID controller complained a bit about missing RAID arrays, but it found foreign RAID array on Drive 1 and I imported it. Server booted and it runs (from degraded RAID). Here is SMART data for disks. Drive 0 (the one that failed first) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1 3 Spin_Up_Time POS--K 142 142 021 - 3866 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10432 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 112 106 000 - 31 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 198 000 - 3 And Drive 1 (the drive which was reported healthy from controller until rebuild was attempted) ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 35 3 Spin_Up_Time POS--K 143 143 021 - 3841 4 Start_Stop_Count -O--CK 100 100 000 - 12 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 086 086 000 - 10455 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 11 192 Power-Off_Retract_Count -O--CK 200 200 000 - 10 193 Load_Cycle_Count -O--CK 200 200 000 - 1 194 Temperature_Celsius -O---K 114 105 000 - 29 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 3 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 In extended error logs from SMART I found: Drive 0 has only one error Error 1 [0] occurred at disk power-on lifetime: 10282 hours (428 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 10 -- 51 00 18 00 00 00 6a 24 20 40 00 Error: IDNF at LBA = 0x006a2420 = 6956064 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 61 00 60 00 f8 00 00 00 6a 24 20 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 18 00 60 00 00 00 6a 24 00 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 80 00 58 00 00 00 6a 23 80 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 68 00 50 00 00 00 6a 23 18 40 00 17d+20:25:18.105 WRITE FPDMA QUEUED 61 00 10 00 10 00 00 00 6a 23 00 40 00 17d+20:25:18.104 WRITE FPDMA QUEUED But Drive 1 has 883 errors. I see only few last ones and all errors I can see look like this: Error 883 [18] occurred at disk power-on lifetime: 10454 hours (435 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 01 -- 51 00 80 00 00 39 97 19 c2 40 00 Error: AMNF at LBA = 0x399719c2 = 966203842 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:57.802 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:57.779 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:55.704 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 40 00 1d+00:25:55.681 READ LOG EXT 60 00 80 00 00 00 00 39 97 19 80 40 00 1d+00:25:53.606 READ FPDMA QUEUED Given those errors, is there any way I can rebuild RAID back, or should I make backup, shutdown server, replace disks with new ones and restore it? What about if I dd faulty disk to new one from linux running on USB/CD? Also, if anyone have more experiences, what could be causes for those errors? Crappy controller or disks? Disks are about 1 year old, but it is pretty unbelievable to me that both would die within so short timespan.

  Read the article

• Mac OS X printing to CUPS - More intuitive authentication failure?

  - by Moduspwnens

  We have a network-wide CUPS server that offers authenticated printer access to all our campus users. We've been pretty disappointed with the way Mac clients handle bad printing authentication, though. In any other authentication dialog, when a user types in a bad username or password, the window shakes briefly, allowing the user to re-enter. With printers, this isn't the case. It'll happily accept (and even save to the keychain, if specified) bad credentials. The authentication dialog is dismissed, and the user then has to deal with the print jobs showing up as "On hold (authentication required)". To get their job printed, they need to select it in the printer's queue, click "Resume", then re-enter appropriate credentials. Is there a way to get failed printing authentication to work more intuitively for Mac OS X clients? We're trying to support a BYOD environment, but our end users have been really confused by this. It's made even worse by the way it pre-populates the user's full login name (e.g. "Smith, John"), which tends to make them think to use their local machine passwords.

  Read the article

• QuickTime Player sounds much better than iTunes

  - by Gene Goykhman

  I am playing a 320 kpbs encoded music MP3 in iTunes and the sound is substantially worse than the exact same file played back in QuickTime Player (Max OS X 10.8.5). I have maxed out system volume and iTunes playback volume. I have disabled all the audio processing features in iTunes (equalization, sound enhancer, etc.) The audio coming from iTunes still sounds resampled and/or processed, whereas QuickTime Player appears to be playing it "as is". Even when I Get Info on the MP3 file in Finder and play it back directly from the Get Info window it sounds good. It's just iTunes that seems to be mangling the song. I can notice a difference on virtually all my music, so it's not just one particular MP3. I suspect the issue is that iTunes is doing some kind of audio processing but I can't find a way to turn it off. This is the newest iTunes (11.1), but the problem has probably been going on for a while... I just switched to decent earbuds and started noticing the difference. What's the best way to force iTunes to play back the file as-is, or as close as possible to how QuickTime Player/Finder would play it?

  Read the article

• emacs, writing custom commands which use term-mode

  - by valya

  Hello, I'm using Emacs and M-x term for a terminal. Since my typical workflow looks like this: edit some code C-x C-o to the terminal buffer (or C-x b term[Enter] or something) press Up key to use the last command press Enter to run it C-x C-o to go back I want to bind all of these (except the first step... maybe) to one command, I believe Emacs is awesome enough to do that :-) So, a command must: go to the buffer with terminal (maybe it shouldn't change any windows at all, maybe it should split the window vertially (if it weren't split already) and use the right sid) run a last command what've been run there go back to the last buffer/part of the screen Thank you! I'm not really used to the Emacs scripting system, and I hope someone will help me and someone else will be able to use the answer to improve his workflow, since I believe this is a pretty common one Examples of commands: python manage.py test python manage.py test stats python solve.py # for project-euler puzzles :-) the first and the second runs over a ssh (in a terminal) sometimes (I like developing with vagrant) I understand that it's easy to bind the first and the third ones, but the second changes too often - I'd just like to "run last command"

  Read the article

• Easy line break removal from text fields and/or selections

  - by AmV

  I'm looking for a tool that allows me to easily re-wrap text (i.e. remove line breaks, but not paragraph breaks from a text selection or the current text field that is being edited), and that works at least with text fields in my browser (Chrome) and on Windows. Bonus points for anything that works outside the browser, and that works in-place (i.e. that doesn't require copy-pasting the text through a separate window or using something like http://www.textfixer.com/tools/remove-line-breaks.php) Browser extensions, GreaseMonkey scripts or applications that also work on Linux and/or Mac (or even better, that are multi-platform) are all welcomed. Here is an example of how the tool should behave. If I have the following in a text field: This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com I'd like to have an easy tool that allows me to, for example, select the text, and with a keyboard shortcut convert it to: This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com Thanks in advance!

  Read the article

• Easy text re-wrapping

  - by AmV

  I'm looking for a tool that allows me to easily re-wrap text (i.e. remove line breaks, but not paragraph breaks from a text selection or a text field), and that works in my browser (Chrome) and on Windows. Bonus points for anything that works outside the browser, and that works in-place (i.e. that doesn't require copy-pasting the text through a separate window or using something like http://www.textfixer.com/tools/remove-line-breaks.php) Browser extensions, GreaseMonkey scripts or applications that also work on Linux and/or Mac (or even better, that are multi-platform) are all welcomed. Here is an example of how the tool should behave. If I have the following in a text field: This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com. This is a test for SuperUser.com I'd like to be able to, for example, select the text, and, with a keyboard shortcut, convert it to: This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com This is a test for SuperUser.com. This is a test for SuperUser.com. This a test for SuperUser.com. This is a test for SuperUser.com Thanks in advance!

  Read the article

• Secondary IP (eth0:0) acts like main server IP

  - by George Tasioulis

  I have a CentOS server, configured with 4 consecutive IPs: eth0 5.x.x.251 eth0:0 5.x.x.252 eth0:1 5.x.x.253 eth0:2 5.x.x.254 The problem is that all traffic goes out to the internet with eth0:0 (5.x.x.252) as the source IP, instead of eth0. # curl ifconfig.me 5.x.x.252 How can I fix this, so that all traffic goes out via eth0, ie my main IP? PS: My server is VPS running on a Xen dom0, the latter being configured in routed mode networking. Thanks in advance! Server configuration # ifconfig eth0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.251 Bcast:5.x.x.255 Mask:255.255.255.255 inet6 addr: fe80::x:x:x:x/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14675569 errors:0 dropped:0 overruns:0 frame:0 TX packets:9463227 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4122016502 (3.8 GiB) TX bytes:25959110751 (24.1 GiB) Interrupt:23 eth0:0 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.252 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:1 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.253 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 eth0:2 Link encap:Ethernet HWaddr 00:x:x:x:x:AE inet addr:5.x.x.254 Bcast:5.x.x.255 Mask:255.255.255.224 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:23 # cat /etc/hosts 127.0.0.1 localhost.localdomain localhost 5.x.x.251 [fqdn] [hostname] # cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.251 NETMASK=255.255.255.224 SCOPE="peer 5.x.y.82" # cat ifcfg-eth0:0 DEVICE=eth0:0 BOOTPROTO=static ONBOOT=yes IPADDR=5.x.x.252 NETMASK=255.255.255.224 # cat route-eth0 ADDRESS0=0.0.0.0 NETMASK0=0.0.0.0 GATEWAY0=5.x.y.82 # netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 5.x.y.82 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 5.x.x.224 0.0.0.0 255.255.255.224 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 5.x.y.82 0.0.0.0 UG 0 0 0 eth0

  Read the article

• FreeNAS AFP Doesn't Authenticate

  - by Timothy R. Butler

  I just set up a FreeNAS 8.0.3 server and am trying to use its AFP (Netatalk) service to access it via a Mac OS X Lion system. I created the ZFS volume, set its permissions to include my user in its owner group (and set group write permissions), created an AFP share with AFP3 and told that share to "allow" @uninet (my group). I have a user on the server named tbutler, matching the user on my Mac. I can see the server, "Beatrice," in Finder. When I try to login in Finder using "Connect As...," the user "tbutler" and the proper password, I am returned to the main Finder window with the black bar now saying "Connection Failed." Here's the most recent data from /var/messages on the server, which shows me trying to login both as a "Registered User" and a "Guest": Jul 30 00:29:07 freenas afpd[8972]: AFP3.3 Login by nobody Jul 30 00:29:08 freenas afpd[8972]: AFP logout by nobody Jul 30 00:29:08 freenas afpd[8972]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:08 freenas afpd[8972]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:08 freenas afpd[8972]: AFP statistics: 0.14 KB read, 0.12 KB written Jul 30 00:29:14 freenas afpd[8975]: AFP3.3 Login by tbutler Jul 30 00:29:14 freenas afpd[8975]: AFP logout by tbutler Jul 30 00:29:14 freenas afpd[8975]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:14 freenas afpd[8975]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:14 freenas afpd[8975]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:20 freenas afpd[8978]: AFP3.3 Login by tbutler Jul 30 00:29:20 freenas afpd[8978]: AFP logout by tbutler Jul 30 00:29:20 freenas afpd[8978]: dsi_stream_read: len:0, unexpected EOF Jul 30 00:29:20 freenas afpd[8978]: afp_over_dsi: client logged out, terminating DSI session Jul 30 00:29:20 freenas afpd[8978]: AFP statistics: 0.62 KB read, 0.48 KB written Jul 30 00:29:27 freenas afpd[8983]: AFP3.3 Login by nobody (My clock is clearly not properly set, but be that as it may...) Any suggestions? UPDATE: Apparently this problem occurs if one gives the AFP share a password in the AFP share settings box. When I removed the password and tried to login using a user account again, it worked just fine.

  Read the article

• Windows 7 Not Recognizing Camera Nor iPhone as Camera

  - by taudep

  I've been struggling with this one for a few days. I've recently upgraded an older computer to Windows 7 Home Premium. Neither my digital camera (A Canon SD1200IS) nor iPhone are ever detected as cameras, nor ever show up as accessable in Explorer. With the Canon camera, no driver is required. It's supposed to work with the default Windows 7 drivers. However, in the Control Panel's Device Manager, I'm always seeing a yellow icon next to the "Canon Digital Camera" device. I've uninstalled the device and let Windows attempt to reinstall, but it can never find a driver to install. With the iPhone, it's very similar. One big difference, though, is that iTunes can see the iPhone and back it up, etc. However, again when I go to the Device Manager, there's a yellow icon next to the iPhone. I've uninstalled iTunes, reinstalled, rebooted, deleted drivers, and let Window try to reinstall the driver, but it can never find the driver. So there seems to be some correlation that my machine can't detect cameras properly, and that it might be even a lower-level type of driver I'm struggling with. I know that USB however, does work, because I have have an external drive hooked into the machine. I've gone through the web and tried two hours worth of fixes, without success. I feel like if I can get the Canon camera detected, then the iPhone will be on it's way to being fixed too. BTW, I couldn't really find anything of use in the Event viewer. Any and all suggestions welcome.

  Read the article

• Linux Experts Riddle: Network output of 10MB/s on 10GB/s NIC

  - by user150324

  I have two CentOS 6 servers. I am trying to transfer files between them. Source server has 10GB/s NIC nd destination server has 1GB/s NIC. Regardless to the command used nor the protocol, the transfer speed is ~1 Mega byte per second. The goal is at least couple dozens MB per second. I have tried: rsync (also with various encryptions), scp, wget, aftp, nc. Here's some testing results with iperf: [root@serv ~]# iperf -c XXX.XXX.XXX.XXX -i 1 ------------------------------------------------------------ Client connecting to XXX.XXX.XXX.XXX, TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [ 3] local XXX.XXX.XXX.XXX port 33180 connected with XXX.XXX.XXX.XXX port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.30 MBytes 10.9 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 1.0- 2.0 sec 1.28 MBytes 10.7 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 2.0- 3.0 sec 1.34 MBytes 11.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 3.0- 4.0 sec 1.53 MBytes 12.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 4.0- 5.0 sec 1.65 MBytes 13.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 5.0- 6.0 sec 1.79 MBytes 15.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 6.0- 7.0 sec 1.95 MBytes 16.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 7.0- 8.0 sec 1.98 MBytes 16.6 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 8.0- 9.0 sec 1.91 MBytes 16.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 9.0-10.0 sec 2.05 MBytes 17.2 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.68 MBytes 14.0 Mbits/sec I guess HD is not the bottleneck here.

  Read the article

• DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

  - by Kev

  I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

  Read the article

• Keyboard's media keys are blocked by a program

  - by Mike Hanson

  I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

  Read the article

• How to activate Win XP from Windows 7 compatibility mode on MacOS Parallels 5

  - by Ben Hammond

  I am running Parallels Desktop 5.0.9344 for Mac. I am running Mac OS 10.6.3 10D2094 I have bought a retail copy of Window 7 professional specifically because I need the XP compatibility. Windows 7 is installed and working. I have problems with the XP activation Windows7 'Virtual PC' does not run under Parallels (strange error about Server Execution failed 0x80080005). I have used the Parallels Transporter to convert the "Windows XP Mode Base.vhd" file into a parallels Virtual Machine. This copy of XP now starts normally, however it records itself as unregistered. There was a KEY.txt file in the same directory as the .vhd file; although this file contains a valid-looking activation key, it does not appear to activate the instance of XP. I have also tried to enter the Win7 activation key; this does not work either. I have tried calling the two phone numbers; an automated system asked me to enter 56 digits through the telephone and then accused me of being a pirate. I believe it may be possible to install Win7 via Bootcamp, start WinXP under Virtual PC, activate it and then import this activated .vhd into Parallels; but that seems a long way round, and is far from certain. What can I do to get WinXP running under Mac Parallels Desktop ?

  Read the article

• Connect over WiFi to SQL Server from another computer

  - by Bronzato

  I tried to connect over WiFi to SQL Server with SQL Server Management Studio from another computer, but it failed. I have a computer with Windows 7 & SQL Server 2008 (lets say the server computer). Next to it I have a freshly installed computer with Windows 7 & SQL Server Management Studio (let's say the client computer). What I did on the server computer: Configure firewall by enabling port 1433 Enabled network protocols (TCP/IP) inside SQL Server Configuration Manager Checked Allow remote connections to this server in server properties in the SQL Server Management application. Started SQL Server Browser Restarted services (SQL Server Browser is stopped at this point, but I don't think it is necessary. Is it?) Next, I successfully tested a ping on the port 1433 from my client computer with a tool named tcping (ex: tcping 192.168.1.4 1433). But I still cannot connect from my client computer to SQL Server on my server computer. Ok, something new with this problem: Until now, I successfully connected to my "server computer" with Management Studio. What I did is type the computer name in the server name field in the connection window of Management Studio. My previous (failed) attempt was to type the computer name followed by the instance of SQL server (ex: COMPUTER_NAME\SQL2008). I don't know why I only have to type the computer name. Now my new challenge is to be successful in connecting my VB6 application to this remote database located on my "server computer". I have a connection string for this but it failed to connect. Here is my connection string: "Provider=SQLOLEDB.1;Password=mypassword;User ID=sa;Initial Catalog=TPB;Data Source=THIERRY-HP\SQL2008" Any idea what's going wrong?

  Read the article

• How to prevent blocking http auth popups on firefox restart with many tabs open

  - by Glen S. Dalton

  I am using the latest firefox with tab mix plus and tabgoups manager. I have maybe 50 or 100 tabs oben in different tab groups. When I shutdown firefox and start it again all tabs and tab groups are perfectly rebuilt. But I have also many pages open that are behind a standard http auth, and these pages all request their usernames and passwords. So during startup firefox pops up all these pages' http auth windows. And they block everything else in firefox, they are like modal windows. (I am involved in website development and the beta versions are behind apache http auth.) I have to click many times the OK button in the popups, before I can do anything. All the usernames and passwords are already filled in. (And the firefox taskbar entry blinks and the firefox window heading also blinks, and focus switches back and foth, which also annoys me. And sometimes the popups do not react to my clicks, because firefox is maybe just switching focus somewhere else. This is the worst.) I want a plugin or some way to skip those popups. There are some plugins I tried some time ago, but they did not do what I need, because they require a mouse click for each login, which is no improvement over the situation like it already is. This is not about password storage (because firefox already stores them). But of course, if some password storing plugin could heal this it would be great.

  Read the article

• Windows 2008 RemoteAPP client disconnects within a matter of minutes.

  - by Jeroen Wilke

  I'm having an odd problem with Windows 2008 TS, and remote applications specifically. The situation is as follows: TS idle timeout is disabled via GPO TS terminating disconnected sessions after 1hr (via GPO) My users can log on to the Terminal server, and get a full desktop, OR via rdp files that give access to a few remote applications. When a user connects to a full desktop, everything is fine and dandy, they will remain logged on indefinately, and when they disconnect the session is terminated after an hour. however, when a user connects using a remote application link, the client seems to disconnect after only a few minutes of inactivity, when you click the window, the session reconnects. EventID's on TS server: 4779: This event is generated when a user disconnects from an existing Terminal Services session, or when a user switches away from an existing destop using Fast User Switching. 4778 : This event is generated when a user reconnects to an existing Terminal Services session, or when a user switches to an existing desktop using Fast User Switching users are connecting directly to 3389, not using a TS-gateway at the moment. This behavior is consistent on different clients that we have, Full desktop is fine, RemoteAPP constantly disconnects. The .rdp file used doesn't list any interesting parameters, aside from what application to launch, and where to find it. Can someone explain to me how there can be a difference in behaviour between full desktop, and remoteapp ? since essentially they use the exact same client ? Regards Jeroen

  Read the article

• Windows 7: Image thumbnails fail to appear

  - by Fopedush

  All right, I've got a pretty strange one here. Since I installed Windows 7 on this machine some time ago, image thumbnails have never worked properly. For the vast majority of images, they completely fail to show up, showing the icon of the default image viewing application instead. Please note that the “Always show icons, never thumbnails” option in folder options is not checked. I've taken a screenshot demonstrating the problem, here: Sometimes, a few image thumbnails will show up correctly, maybe about one in ten, with the rest failing as well. Another screenshot, with a handful of thumbnails visible, can be seen here: Windows explorer does not appear to make any effort to populate the missing thumbnails, and there is no appreciable CPU usage. I can leave a window with missing thumbnails open all night and they will still never appear. Newly created images never generate thumbnails, only images that have been on the system since day one will occasionally show them. This leads me to believe that explorer is set to show thumbnails, but whatever process is supposed to be in charge of actually generating them has failed somehow. In previous versions of windows, explorer.exe itself was responsible for thumbnail generation – has this changed? Any suggestions at all – even if you aren't sure that they will work – are welcome. I'd hate to have to wipe and reinstall on this machine for such a minor annoyance.

  Read the article

• How do I only dp or do just the lines, not the entire block in Vim diff?

  - by hobbes3

  I'm currently using MacVim (Snapshot 64) "Split Diff by..." menu option. The file is Django's my settings.py from version 1.3.1 to a fresh file from version 1.4. (Open the image on a separate window/tab to enlarge.) I know two basic commands do to "obtain" (and replace) a block from the other side. dp to "put" (and replace) a block to the other side. But those two commands writes the entire block, which in MacVim is the purple highlights. If you look at the 2nd block, you can see that from line 2 and 3 only has 2 words that are different: mysite and hobbes3. I just want to replace per line not the entire block. So what is there a command to replace do do and dp per line as oppose to an entire block or do I have to manually type it out? Bonus question: I noticed that once I manually edit a block, I lose the purple highlighting. How do I "refresh" the diff again to include the highlights without reopening the file? Please try to keep the answers Vim-general as oppose to MacVim-specific. Thanks!

  Read the article

• Need to get SMTP server on MS Server 2003

  - by Matt Dawdy

  Long story short, client paid networking company to move their website in house. Now I have to figure out how to email out from their website even though they don't have an SMTP server. At least until I install one. Their email is hosted with Gmail right now (the client's domain through Google App for Your Domain). I changed my code to connect as one of their users "[email protected]" and send email. Worked great for about 12 hours. All of a sudden none of the automated emails are going out now, and google is sending the emails back saying that it is a permanent failure and Message Rejected. The link they direct me to, http://mail.google.com/support/bin/answer.py?answer=69585 is telling me that our emails look like spam. They aren't. They are emails we send to out clients about the status of their applications. Seriously, they are NOT spam. So...long story short is out the window, sorry...but I need to get an SMTP server setup inside their domain that I can send emails out of. This thing won't need to receive emails ever, and really only needs 1 email account customercare. What can I do? Will I have to have the networking company open a port in the firewall? Is there one built into Server 2003?

  Read the article

• Running Jackd on Ubuntu for my External Firewire Sound card

  - by Asaf

  Hello, I'm running Ubuntu 10.04 and I have an external Sound card: Phonic Firefly 302. I've connected the device, installed Jackd, added the lines: @audio - rtprio 99 @audio - memlock 500000 @audio - nice -10 to /etc/security/limits.conf logged out, logged back in, ran qjackctl (sudo qjackctl to be exact), ran the settings and chose "firewire" on the driver option, pressed "Start" and that was the output: 20:10:19.450 Patchbay deactivated. 20:10:19.578 Statistics reset. 20:10:19.601 ALSA connection graph change. 20:10:19.828 ALSA connection change. 20:10:21.293 Startup script... 20:10:21.293 artsshell -q terminate sh: artsshell: not found 20:10:21.695 Startup script terminated with exit status=32512. 20:10:21.695 JACK is starting... 20:10:21.695 /usr/bin/jackd -dfirewire -r44100 -p1024 -n3 jackd 0.118.0 Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details 20:10:21.704 JACK was started with PID=22176. no message buffer overruns JACK compiled with System V SHM support. loading driver .. libffado 2.0.0 built Mar 31 2010 14:47:42 firewire ERR: Error creating FFADO streaming device cannot load driver module firewire no message buffer overruns 20:10:21.819 JACK was stopped successfully. 20:10:21.819 Post-shutdown script... 20:10:21.822 killall jackd jackd: no process found 20:10:22.230 Post-shutdown script terminated with exit status=256. 20:10:23.865 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info. Error: "/tmp/kde-asaf" is owned by uid 1000 instead of uid 0.

  Read the article

• Which Ubuntu-like Linux OSs work well on a flash drive?

  - by Evan Kroske

  I want a Linux OS that I can load on a flash drive, but I don't want to relearn an entire operating system. I want to know which tiny Linux installations are most like Ubuntu. For example, I'd like to use the apt-get package manager, the Gedit text editor, and the bash shell. I'd like to use something that's already popular, stable, and highly compatible, but it needs to fit comfortably in one gig of my four-gig flash drive (just the essentials; I'll use the remaining three gigs to store installed programs and files). I have no preference for window managers; I just want something small and fast that works like Ubuntu. What is the most popular Ubuntu-like OS that can be easily run on a thumb drive? Edit: I'm not sure I understand how this works. I don't to use a USB drive as a LiveCD; I want to plug in a USB stick and use the computer as if it was my own. In other words, I want to be able to install programs on the drive on one computer and use them on another. Do any of these OSs let me do that? Please forgive my ignorance.

  Read the article

• Rsync when run in cron doesnt work. Rsync between Mac Os x Server and Linux Centos

  - by Brady

  I have a working rsync setup between Mac OS X Server and Linux Centos when run manually in a terminal. I enter the rsync command, it asks for the password, I enter it and off it goes, runs and completes. Now I know thats working I set out to fully automate it via cron. First off I create an SSH authorized key by running this command on the Mac server: ssh-keygen -t dsa -b 1024 -f /Users/admin/Documents/Backup/rsync-key Entering the password and then confirming it. I then copy the rsync-key.pub file accross to the linux server and place in the rsync user .ssh folder and rename to authorized_keys: /home/philosophy/.ssh/authorized_keys I then make sure that the authorized_keys file is chmod 600 in the folder chmod 700. I then setup a shell script for cron to run: #!/bin/bash RSYNC=/usr/bin/rsync SSH=/usr/bin/ssh KEY=/Users/admin/Documents/Backup/rsync-key RUSER=philosophy RHOST=example.com RPATH=data/ LPATH="/Volumes/G Technology G Speed eS/Backup" $RSYNC -avz --delete --progress -e "$SSH -i $KEY" "$LPATH" $RUSER@$RHOST:$RPATH Then give the shell file execute permissions and then add the following to the crontab using crontab -e: 29 12 * * * /Users/admin/Documents/Backup/backup.sh I check my crontab log file after the above command should run and I get this in the log and nothing else: Feb 21 12:29:00 fileserver /usr/sbin/cron[80598]: (admin) CMD (/Users/admin/Documents/Backup/backup.sh) So I asume everything has run as it should. But when I check the remote server no files have been copied accross. If I run the backup.sh file in a terminal as normal it still prompts for a password but this time its through the Mac Key chain system rather than typing into the console window. With the Mac Key Chain I can set it to save the password so that it doesnt ask for it again but Im sure when run with cron this password isnt picked up. This is where I'm asuming where rsync in cron is failing because it needs a password to connect but I thought the whole idea of making the SSH keys was to prevent the use of a password. Have I missed a step or done something wrong here? Thanks Scott

  Read the article

< Previous Page | 566 567 568 569 570 571 572 573 574 575 576 577  | Next Page >