Search Results

Search found 20733 results on 830 pages for 'ui design'.

Page 571/830 | < Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• Do MSDTC and disaster recovery go together?

  - by DevDelivery

  Our application writes to multiple Sql Server databases within a distributed transaction. The Ops guys are saying that this messes up their disaster recovery plan because while the transactions on the live tables may commit at the same time, the log shipping on the separate databases happen at slightly different times. So in in a disaster recovery situation, there will be a few partial transactions. Is there a method for maintaining separate but synced databases in DR? Or do we have to re-design to relatively independent databases (or a single database)?

  Read the article

• Saving a modified InfoPath form to its form library

  - by Nathan Lykken

  Within our corporate SharePoint 2007 site, there is a particular form library that contains 10 separate files. 9 of these are either Excel, Word, or PowerPoint files and one of these is an InfoPath 2007 form that serves as a report. After noticing an error within this InfoPath form, I saved this InfoPath form to my local directory and then, within the design mode of InfoPath, I modified this InfoPath form. What is the proper way to save this modified InfoPath form to its form library? Everything that I have tried results in nobody except myself having access to this modified InfoPath form. I can open this InfoPath form without error but when my coworkers try to open this InfoPath form on their machines, they receive this error: “The form cannot be opened because it requires the domain permission level and it currently has restricted permission. To fix this problem, open the form from the location it was published to."

  Read the article

• What proportion of DBA skills are platform-independent?

  - by Arkaaito

  Problem: we've grown to the point where we need a real DBA. Real DBAs are hard to find. Possible solution: I know someone with extensive experience (currently working on MSSQL) who is looking for a new DBA job. He might be willing to consider working for a MySQL shop (I haven't asked). Snag: I don't know to what extent MSSQL DBA skills map to MySQL DBA skills. I'm a developer, so I know enough about MySQL to develop apps which use it (including the basic performance-tuning, index selection, etc.), do schema design, and perform simple utility tasks (backup with mysqldump, scripting, etc.). I don't know anything about MSSQL. Nor do I actually know much about the boundaries of the DBA role. Can anyone with more experience - perhaps as a DBA - weigh in on this? Are there enough similarities between MSSQL and MySQL that it's worth asking a MSSQL DBA if he'd be interested in applying for a MySQL position?

  Read the article

• Hybrid Shutdown in Windows 8

  - by Moab

  Referring to this article published September 8, 2011, it gives instructions on how to to do a full (non-hybrid) shutdown in Windows 8 from the command line. We have an option in the UI to revert back to the Windows 7 shutdown/cold boot behavior, or since that’s likely a fairly infrequent thing, you can use the new /full switch on shutdown.exe. From a cmd prompt, run: shutdown /s /full / t 0 to invoke an immediate full shutdown. shutdown /s /full /t 0 I tried this in W8 Enterprise RTM trial, but did not work, so I did a shutdown /? and noticed they have changed the command for a Full shutdown It appears the /s switch now does the full shutdown as explained in the MS article, and the /hybrid switch does the hybrid shutdown for fast startup. Can anyone confirm this change in other RTM versions of Windows 8? Any Microsoft docs on this change are welcome.

  Read the article

• How to troubleshoot a GPF?

  - by AngryHacker

  I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

  Read the article

• Why doesn't update-manager allow me to upgrade distribution?

  - by spoulson

  I have an Ubuntu 9.04 PC behind a corporate firewall and proxy server. This requires that in order to get update-manager to fetch and apply updates, I must set the proxy and authentication settings in the Synaptic network configuration. Once done, I can check for updates and things work smoothly (except I don't get popup notifications of new updates, must manually check periodically). However, distribution updates just don't show up in update-manager, such as the newly released 9.10 Karmic Koala. I had the same issue in upgrading 8.10 to 9.04 and solved it by downloading and upgrading from the 9.04 ISO. What do I need to do to upgrade to 9.10 using the standard update-manager UI?

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

• apache2 mod_proxy configuration for single threaded servers

  - by The Doctor What

  I have a multiple instances of thin running behind apache 2.2's mod_proxy. The problem I have is that a couple pages, by design, take a while to run. If I just configure apache the obvious way (just add the thin urls as BalanceMember lines and no other configurations) then what happens is if someone clicks on the long-running page, then if enough web requests happen while it is running, someone eventually gets the same thin server and has to wait. Does anyone have some best practices or suggested configuration for mod_proxy and thin? Ciao!

  Read the article

• scanning only works under "sudo" (Ubuntu)

  - by JoelFan

  When I try to scan, using simple-scan, the UI says Failed to scan -- Unable to connect to scanner. When I run it from the command line I get: joel@home:/usr/bin$ simple-scan -d ** (simple-scan:6554): DEBUG: Starting Simple Scan 2.32.0.1, PID=6554 ** (simple-scan:6554): DEBUG: Restoring window to 600x400 pixels ** (simple-scan:6554): DEBUG: sane_init () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: SANE version 1.0.22 ** (simple-scan:6554): DEBUG: Requesting redetection of scan devices ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: Requesting scan at 300 dpi from device '(null)' ** (simple-scan:6554): DEBUG: scanner_scan ("(null)", 300, SCAN_SINGLE) ** (simple-scan:6554): DEBUG: sane_get_devices () -> SANE_STATUS_GOOD ** (simple-scan:6554): DEBUG: Device: name="brother2:bus4;dev1" vendor="Brother" model="MFC-210C" type="USB scanner" ** (simple-scan:6554): DEBUG: Processing request ** (simple-scan:6554): DEBUG: sane_open ("brother2:bus4;dev1") -> SANE_STATUS_IO_ERROR ** (simple-scan:6554): WARNING **: Unable to get open device: Error during device I/O FYI, I have already done: joel@home:~$ sudo chmod a+rwx /dev/bus/usb joel@home:~$ sudo chmod a+rwx /dev/bus/usb/* If I run under sudo: joel@home:~$ sudo simple-scan it works. How can I get simple-scan to work without sudo?

  Read the article

• SmartSVN - Unable to create new repository profile

  - by Sandeepan Nath

  I have just installed SmartSVN on this fedora system. The application starts (on running ./smartsvn.sh) with its usual UI but many things are not working. Creating New repository profile Trying to create a new repository profile (Repositories- Repository Profiles- Add) An Error occurred while processing an SVN command - Cannot connect to 'svn+ssh://192.168.0.103': There was a problem while connecting to 192.168.0.103:22 Quick Checkout Trying to do Quick Checkout (less configuration) An Error occurred while processing an SVN command - Malformed XML. Some Observations When I run the smartsvn.sh file like this:- ./smartsvn.sh It shows this in the console - Warning: /bin/java does not exist Could not lock /root/.smartsvn/_lock_ Switched to running instance I was using SmartSVN in another system before this where it was working. There too, it was showing the warning like Warning: /bin/java does not exist but this part was not showing:- Could not lock /root/.smartsvn/_lock_ Switched to running instance I have only JRE installed in both the systems and not JDK. So, what could be the reason? Any pointers? Thanks, Sandeepan

  Read the article

• Http 400 'Bad Request' and win32status 1450 when larger messages are sended to a WCF service

  - by Tim Mahy

  Hi all, we sometimes receive Http 400 bad request resultcodes when posting a large file (10mb) to a WCF service hosted in IIS 6. We can reproduce this using SOAP UI and it seems that it is unpredictable when this happens. In our WCF log the call is not received, so we believe that the request does not reach the ASP.NET nor WCF runtime. This happens on multiple websites on the same machine each having their own application pool. All IIS settings are default, only in ASP.NET and WCF we allow bigger readerQuota's etc.... The win32status that is logged in the IIS log is 1450 which we think means "error no system resources". So now the question: a) how can we solve this b) (when a is not applicable :) ) which performance counters or logs are usefull to learn more about this problem? greetings, Tim

  Read the article

• How can I get VirtualBox Guest Additions installed in an Ubuntu 9.10 server?

  - by sutch

  I have a freshly installed Ubuntu 9.10 server installed within a VirtualBox VM instance. From the VirtualBox menu bar, I selected Devices: Install Guest Additions... Then performed the following commands: > sudo apt-get install -y build-essential linux-headers-$(uname -r) > sudo mount /dev/cdrom /mnt/ > sudo /mnt/VBoxLinuxAdditions-amd64.run After some successful looking results, the following error is displayed: Installing the Window System drivers ...fail! (Could not find the X.Org or XFree86 Window System.) After restarting, I was looking forward to some UI integration with my host desktop (resize window, not needing to press right-Ctrl to escape the client window, and having copy and paste functionality. Is it possible to install the Guest Additions without the X Window overhead (I plan to only use for shell commands)? If additional packages are required, which ones?

  Read the article

• should the same machine key be used in development and production environments?

  - by Henry Troup

  Our production servers all have the same machine key. However, our production and development systems do not have identical machine keys. We get heaps (about one per second) of exceptions of the form System.Security.Cryptography.CryptographicException: Padding is invalid and cannot be removed. at System.Security.Cryptography.RijndaelManagedTransform.DecryptData() at System.Security.Cryptography.RijndaelManagedTransform.TransformFinalBlock() at System.Security.Cryptography.CryptoStream.FlushFinalBlock() at System.Web.Configuration.MachineKeySection.EncryptOrDecryptData() at System.Web.UI.Page.DecryptStringWithIV()... We deploy the code after a build, .cs source is not present on production. aspx files are present on production. (Should I have posted in Stack Overflow? It's not a coding question.) From experimentation, we've found using the dev machine key value causes the exceptions to go away. Does anyone have documentation that I can use with the security team on the need for identical keys at compile and deployment time?

  Read the article

• How to prevent recursive windows when connecting to vncserver on localhost

  - by blog.adaptivesoftware.biz

  I have a VNCServer (vino) configured on my Ubuntu 8.10 box. I would like to connect to this server from a vncclient running on this same machine (the reason for doing this strange thing is mentioned below). Understandably, when I connect to a vncserver on the same box, my vncclient shows recursive windows. Is there a way I can connect to the vncserver on the same machine and not have the recursive windows problem? Perhaps if I could start the vncserver on one display and the client on another display then will it work? How can I do something like this? Note - Reason for running vnc client and server on the same machine: When I start our Java Swing unit test suite, a bunch of swing UI's are created and destroyed as the tests run. These windows fly in the foreground making it impossible to work while the test suite is running. I am hoping to start the test suite within a vncclient so that I can continue working while the tests run.

  Read the article

• VMWare Guest NIC Teaming

  - by Justin Popa

  We're looking to add additional bandwidth to a VM running on an ESXi cluster running 5.1. How can I team these within the VM? I suspect I need to add a second e1000 and then install some Intel software to team them. Any idea which version of Intel driver? Is there some better software to use? EDIT: Sorry, neglected some information. The guest OS is Win2k8R2. The physical NICs on the host are 1Gbps. The reason this has come up is we are seeing the VM hitting near cap on the capability of a single 1Gbps link (Usually at 100-110MBps, bursting to 130s, but I think that may just be a UI math lie) and we're interested in seeing if adding an additional NIC in a teamed setting will increase the overall throughput.

  Read the article

• Dual HDMI input - HD Video Capture Card

  - by Shivan Raptor

  Any suggestion for HD video capture card? Here is my requirements: I need 2 HDMI input for 2 HD Camera the signal captured will be encoded with Adobe Live Encoder (does it support dual input sources? I do not require mixing of 2 sources) the encoding format will be H.264 (720p), then will be sent to Adobe Flash Media Interactive Server for LIVE broadcasting. http://www.blackmagic-design.com/products/intensity/ I found the one above online, but I am not sure about its performance, and it has only 1 HDMI input. If I plug 2 of them into my workstation, will it conflict with each other?

  Read the article

• Are there any HTPC-optimized web browsers?

  - by smackfu

  Features that I would ideally include in "HTPC-optimized": Full-screen. Navigable using a remote or the keyboard arrows. Legible at couch distances. Or, to put it another way, imagine the design requirements for Hulu Desktop or XBMC or WMC, applied to a web browser. Opera on a Wii meets most of these criteria but not being HD wastes a lot of potential. If a single solution doesn't exist, is there some combination of Firefox add-ons that will get me there?

  Read the article

• Battery management of a Macbook

  - by darthvader

  I bought a Macbook Pro last week. I mostly use (and plan to use) it like a desktop with an external monitor. I use the system at least 15 hours a day. Now using the coconut battery application, I figured out that the capacity has the current capacity has reduced to 98% of the design capacity. I was wondering what is the best way to manage battery. Should it be always either charging or discharging Should it be plugged in all time. I barely get 2 hours and 30 minutes on battery. Is that normal? I run XCode, VMWare Fusion (for Visual Studio), Mail app, Chrome (5-10 tabs) and Itunes (mp3). The brightness is 60% on battery. I already did the calibration.

  Read the article

• Chrome start page: no "Most Visited" nor "Apps", just "Blank" wanted

  - by Robottinosino

  Google Chrome Version 22.0.1229.79 on OS X 10.8.2 How can I get just a plain blank page as my home page, not just a list of "Most Visited" sites or "Apps" installed, please? I did try using the about:blank and/or javacript:void() workaround from these sources: http://productforums.google.com/forum/#!category-topic/chrome/discuss-chrome/xTKRGDi6Rb4 How to make a blank page in Google chrome at start-up? Note the UI has changed since this and I am confused: Chrome "New Tab Page" not showing most frequently visited pages I prefer not to install extensions from unknown sources, like recommended here: Make Chrome New Tab Totally Blank

  Read the article

• Music player alternative to windows Media Player

  - by patjbs

  I find the UI and general usability of the prepackaged windows Media Player to be cludgy and at times incomprehensible. I used to use programs like WinAmp and Sonique, many years ago. What are some current alternatives to the windows Media Player? I don't have iTunes - I'm pretty happy with ripping my own audio files from my album collection. I'm specifically looking for the follow qualities/abilities: Easy sorting and manipulation of the media library Easy tagging of media - marking favorites and ratings, etc. Preferably lightweight. Something like a Picasa for audio media.

  Read the article

• How to config cscope in emacs?

  - by Kim

  I'm using Ubuntu 10.10 as my os, I am using emacs in Gnome. I have installed emacs and cscope successfully: sudo apt-get install emacs sudo apt-get install cscope then run command in the directory of the source code folder in my terminal, and the index files have been produced. cscope-indexer and add the following stuf in .emacs in home/username folder (require 'xcscope)) ) However, there isn't a short-cut ,'CSCOPE', in the emacs ui and when I use ctrl_c + s to use cscope, emacs said it's undefined. What should i do now to make cscope run.

  Read the article

• Colors differ in the dual monitor

  - by becomingGuru

  I use a dual monitor. The colors appear entirely different on the new monitor than they do on my laptop. When you are selecting colors etc, to be included in a website design, it totally freaks me out. Is there no software solution that finds how the settings of one of the monitor is and puts that to the second one? Otherwise what all settings do I need to change manually on the second monitor to make it appear as it does on the laptop? Thanks in advance.

  Read the article

< Previous Page | 567 568 569 570 571 572 573 574 575 576 577 578  | Next Page >