Search Results

Search found 21184 results on 848 pages for 'cable internet'.

Page 573/848 | < Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >

• The RTL8111/8168B NIC under Linux and the r8168 driver

  - by nik

  So I've got one of the infamous R8168 Realtek ethernet NIC, which have some problems under Linux. After some research, I found out I had to use the r8168 driver for this card (and not the r8169 which still loads when nothing else is available), which I did. So now everything works fine... Sort of. My download and upload rates are more than halved compared to what I should get. When I test (with eg. speedtest) I get something like 20M (often 15M) in download and 30M in upload, but if I test under Windows (everything is otherwise identical: same ethernet cable, same connection, at the same time of the day (well 5 min apart)...), I get 50M upload/download (which is what I expect). Where can it come from? Here's some info: ~ # lspci [...] 06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) ~ # modinfo r8168 filename: /lib/modules/3.2.1-gentoo-r2/net/r8168.ko version: 8.027.00-NAPI license: GPL description: RealTek RTL-8168 Gigabit Ethernet driver author: Realtek and the Linux r8168 crew <[email protected]> srcversion: 0A6E9F1D4E8E51DE4B6BEE3 alias: pci:v00001186d00004300sv00001186sd00004B10bc*sc*i* alias: pci:v000010ECd00008168sv*sd*bc*sc*i* depends: vermagic: 3.2.1-gentoo-r2 SMP mod_unload [...] ~ # mii-tool -v eth0: negotiated 100baseTx-HD, link ok product info: vendor 00:07:32, model 17 rev 4 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• Articles on TFS Build Server / MSBuild

  - by MartinWatts

  I have decided to write some articles on using a TFS Build Server. During the past few years I have had the responsibility and challange of keeping one running, and I found out that on some subjects, there is very little to find on the internet. So hopefully my experiences can help others. That is, before VS 2010 build server makes everything we have learnt on MSBuild so far redundant. ;) The first article is about selectively getting the sources you need to get the build done. You can find the article here.

  Read the article

• How to disable tap to click in Lubuntu 13.10

  - by radiomasten

  Tap to click is usually the first thing I disable when I have installed a new OS, but this time I couldn't get rid of it. In earlier versions of Lubuntu, I was able to disable it by writing "@synclient MaxTapTime=0" to /etc/xdg/lxsession/Lubuntu/autostart and save. But in Lubuntu 13.10 this method doesn't work any more. I can't find any solution on the internet either. (If there was a checkbox in "mouse and keyboard" preferences in LXDE to turn tap to click on/off permanently, like in Unity, that would make both lovers and haters of this divisive feature happy. I don't understand how this feature could be thought of as something everybody wants.)

  Read the article

• Server Side Developer Prerequisites

  - by Jking

  I am new to server side development and am currently learning node.js. What sort of networking information should I be familiar with to allow for a smooth learning curve with server side development. Could anyone provide resources pertaining to the information required to get into server programming? To give you a better idea of my standpoint: I do not know how a server interacts with a database [Q: How does a NoSQL database, or database in general, communicate with a server?] I am unsure of how a web stack works [Q: I have heard of LAMP but do not know how Apache, MySQL, and PHP interact. Hopefully this applies to other stacks as well. How do the components of a stack work together? Also, is a MEAN stack an alternative, or is it completely irrelevant to this] I have trivial knowledge of internet protocol [however extremely inefficient][Q: What resources are beneficial when learning about networking, and how much/what knowledge should I acquire to program on the server side] I am unsure of what I am unsure of concerning networking information necessary to start development Information on how the client-server model works would be greatly appreciated

  Read the article

• Using proxy on my Ubuntu 12.04 and proxy exception problem

  - by user1343713

  im new in linux systems. I recently installed Ubuntu 12.04 LTS and it works fine with me, but i have a problem. I live in the university dorms and in order to use internet i have to put proxy settings which require authentication, i had a problem with downloading from the store but i read the solution you wrote here still sometimes it works sometimes :( i dont know why. But the big problem is if i want to open any link from inside the university i have to disable the proxy, on Windows there were an exception for using the proxy you can easily do it. is there any possible way of doing that in Ubuntu 12.04 Thank you for being helpful

  Read the article

• What happened to HTML table tags?

  - by John

  I started to code HTML in 1998, and in that time I was used to code a lot table tags, playing with tr and td, I learned many things analysing the source code of many portals on the internet with notepad and Microsoft FrontPage, the latter, aw, how many tables overlapping others, it was fun, I loved that time. However, I abandoned web programming for almost seven years and this year I decided to see what's the web programming today likes. Completely different, there are not table tags anymore, it's full of div and span tags. Why happened ? What are these new tags and why nobody codes in table tags anymore ?

  Read the article

• Les antivirus gratuits sont "suffisants" et les éditeurs de sécurité "trop alarmistes", faut-il encore payer pour protéger son ordinateur ?

  Les antivirus gratuits sont "suffisants" et les éditeurs de sécurité "trop alarmistes", faut-il encore payer pour protéger son ordinateur ? Mise à jour du 08.01.2011 par Katleen Un groupe britannique de défense des droits des consommateurs vient de publier un rapport se penchant sur la protection des ordinateurs, et dont les conclusions en raviront plus d'un (mais irriteront certainement certains éditeurs). Which Computing a configuré cinq ordinateurs de différentes manières, avec divers antivirus et firewall, de la protection la plus haute à la plus faible (un ordinateur équipé d'aucun logiciel de sécurité) ; et cela un mois durant pour visiter tout un tas de sites Internet. Résultat : auc...

  Read the article

• Really simple FOSS CSS for a report?

  - by Andrew

  I'm creating a web-based report. It will be a single column, no menu. Just titles, graphs, tables. Maybe a header and a footer. I've scoured the internet for a free, open source (or just 'free') CSS 'template' that will turn my grotty looking HTML page in to a nicely colored page with good fonts. Something simple I can just drop in. Is there such a thing? My issue is that I'm not a designer, I just want to pop something in and have it work and look good.

  Read the article

• sound card is not working

  - by ralph crowhurst

  I've installed Ubuntu 11.4 on my dell xps m2010 using wubi. Then booted up and could not connect to the Internet using 3three huawei e122 usb mobile broadband (I would like this to work also). I've managed to connect through a wireless network, I went to my favorite sites and was told I needed to install adobe flash player.This what I did players run and picture is good. But there is no sound! Then I've tried to play songs in Banshee, but no sound. I have checked everything in sound preferences including test speaker, there is sound. I have sigmatel sound card. Thanks

  Read the article

• MSDN Magazine May Issue is Live

  Editor's Note: This Way-Cool 'Internet' Doohickey It wasn't all that long ago that surfing meant grabbing a board and hanging 10. Keith Ward Silverlight Security: Securing Your Silverlight Applications Josh Twist explains the unique challenges developers face in securing Silverlight applications. He shows where to focus your efforts, concentrating on the key aspects of authentication and authorization. Josh Twist Now Playing: Building Custom Players with the Silverlight Media Framework...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Why am I seeing MailSlot Browse messages on unrouted ports of my Linux box?

  - by nmichaels

  I have a Linux box (Debian squeeze) with several NICs. The ones of interest are: eth3 - my main link to the network (dhcp on 10.20.30.0/24) eth0 - the first connection to my test network (static: 192.168.1.2) eth4 - the second connection to my test network (static: 192.168.1.1) My routing table looks like this: $ sudo route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.20.30.0 * 255.255.255.0 U 0 0 0 eth3 default 10.20.30.254 0.0.0.0 UG 0 0 0 eth3 I have the 2 test net ports connected to each other with a crossover cable and an instance of wireshark running on each port. Every once in a while, I'll see a packet like the following show up. Who could be doing this, and how do I convince them to stop? I do have Samba running on the machine (for a cifs mount) but don't see why it would be sending packets out to unrouted ports. I had a Windows VM running in VMWare Client and thought that might be causing it, but it still happens without it. What I want is totally silent interfaces so I can run some tests with Scapy over them.

  Read the article

• How to connect Nexus 7 with Ubuntu

  - by gotqn

  I want to move some files from my PC to Nexus 7. The tablet is connected to my PC's USB port and it is successfully charging. Unfortunately, the PC is not detecting the devices - what I expected is to be shown the Nexus 7 tablet as external devices (like my USB flash memory). As the tablet is connected to the my home internet network, I have checked if it will appear in the "Networks" section but it does not. I am using Ubuntu 12.4 LTS. Is there a easy way to connect the devices to my PC and move some information between them?

  Read the article

• How to get gigabit network speeds on Windows XP?

  - by JB

  We've just installed gigabit switches at work, and things on the Linux side are going well. Our linux boxes, which use a Intel Corporation 82566DM-2 Gigabit nic (according to lspci), consistently get over 900 mbits/sec: iperf -c ipserver ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 16.0 KByte (default) ------------------------------------------------------------ [ 3] local 192.168.40.9 port 39823 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.08 GBytes 929 Mbits/sec We have a bunch of Windows XP 64-bit machines that use Broadcom NetXtreme 57xx cards. I spent around a day trying to get equivalent speeds on them, but couldn't get above 200 Mbits/sec. I noticed the Windows iperf tests said that the TCP window size was 8 Kb by default (as opposed to 16 Kb on Linux, so I modified my test to reflect that. Still no love. I went to Broadcom's site, downloaded the latest drivers for the card and installed. Still no love. However, finally, I tried a 64 Kb window size with the new drivers, and finally an improvement! $ iperf -c ipserver -w64k ------------------------------------------------------------ Client connecting to ipserver, TCP port 5001 TCP window size: 64.0 KByte ------------------------------------------------------------ [ 3] local 192.168.40.214 port 1848 connected with 192.168.1.115 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 933 MBytes 782 Mbits/sec Much better, but still not really taking advantage of the full capabilities of the network. If the Linux box can reach 950 Mbits/sec consistently, this box should be able to as well. Also, if you're wondering about the medium, this is over the same cable...I'm switching back and forth. Any suggestion or ideas would be really welcome. Thanks!

  Read the article

• OpenWrt vs DDWrt

  - by Ioan Paul Pirau

  I have a TP-Link Wr1043ND router and I want to install one of these two firmwares: OpenWRT DD-WRT I read that I can install custom packages and do much more than I can with the original firmware. I would like to ask someone with experience in using both OpenWRT and DD-WRT which he would recommend and why. And to give a few reference points I'm interested in: reliability – network stability both on cable and wireless and on the usb drive performance – network speed, very important also usb drive speed configurability – the possibility to add extensions such as a torrent client, FTP, SSH, WWW and SVN server directly ease of use – the ease of installation and configuration of the router support/docs – how much info there is if you stumble upon a problem and you have to find some documentation, or if there's any free support (but that's a longshot) Of course I don't imagine that I will find the perfect firmware and that one is vastly superior over the other. Also if there's anyone out there who uses one of these firmwares on a TP-Link Wr1043ND, it would be great to get some feedback about the impact of the changes from the original firmware. P.S. I'm open also for Tomato if it's the better one.

  Read the article

• Log incoming requests

  - by Maxim Eliseev

  We have Tomcat running on Ubuntu server. It runs a web service, open to the internet. Sometimes it has sudden spike of traffic and goes down. There is nothing unusual in Tomcat access logs. I guess because some of the requests are so 'heavy' that they never finish and hence are not recorded to Tomcat access logs. Is there a way to configure Ubuntu to log incoming requests in the following format (below)? Date, Time, URL (with query string params), IP address (of client) There should be one line per request. Each request should be logged before it is executed. Only incoming requests to ports 80 and 443 should be logged.

  Read the article

• Power & Sleep Management

  - by Espressofa

  I'm running 12.10 with xmonad. Trying to ensure that the right things happen when I close laptop lid, etc. I see Internet search results for similar issues that mostly point towards gnome-power-manager. I have the package installed, but gnome-power-manager is not in my path anywhere. The behavior I'm looking for is as following: Sleep on lid close Awaken on lid open Turn off screen after 10 idle minutes Most importantly, have better battery life. I'm supposed to be getting 9 hours and I haven't seen the battery life estimate above 2.5 hours yet. Any tips on where to look or how to configure this would be much appreciated.

  Read the article

• Sending a android.content.Context parameter to a function with JNI

  - by Ef Es

  I am trying to create a method that checks for internet connection that needs a Context parameter. The JNIHelper allows me to call static functions with parameters, but I don't know how to "retrieve" Cocos2d-x Activity class to use it as a parameter. public static boolean isNetworkAvailable(Context context) { boolean haveConnectedWifi = false; boolean haveConnectedMobile = false; ConnectivityManager cm = (ConnectivityManager) context.getSystemService( Context.CONNECTIVITY_SERVICE); NetworkInfo[] netInfo = cm.getAllNetworkInfo(); for (NetworkInfo ni : netInfo) { if (ni.getTypeName().equalsIgnoreCase("WIFI")) if (ni.isConnected()) haveConnectedWifi = true; if (ni.getTypeName().equalsIgnoreCase("MOBILE")) if (ni.isConnected()) haveConnectedMobile = true; } return haveConnectedWifi || haveConnectedMobile; } and the c++ code is JniMethodInfo methodInfo; if ( !JniHelper::getStaticMethodInfo( methodInfo, "my/app/TestApp", "isNetworkAvailable", "(android/content/Context;)V")) { //error return; } CCLog( "Method found and loaded!"); methodInfo.env->CallStaticVoidMethod( methodInfo.classID, methodInfo.methodID); methodInfo.env->DeleteLocalRef( methodInfo.classID);

  Read the article

• Webhosting for a TV channel with streaming video

  - by Murtez

  Hi guys, I'm making a website for a web based TV channel, so I'm assuming it will be heavy on bandwidth usage, but I'm no good at calculating bandwidth. Couple of questions: Assuming the site streams HD video 24 / 7 to 1000 people, how much bandwidth is that? Where should something like this be hosted? The channel will have a fiber internet optic connection, but I don't know the limit on their bandwidth, would it be better to get their own server or host online? In either case in question 2, any recommendations? I'm usually a regular web designer for minor businesses, so this is a new level. Your help is appreciated.

  Read the article

• Media Center - TV constantly pauses 1/2 second then plays 1 second

  - by Bob

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Resetting network adapter?

  - by Quixo

  I'm running Ubuntu 12.04. I get a strong wireless signal throughout my house, and the wireless symbol in the upper-right-hand corner shows that it's connected. The problem is, occasionally I am unable to access the internet (still having a strong symbol). This happened with Windows 7, too, but running the network troubleshooter fixed it each time. It claimed to be "resetting the network adapter". So, what I need to know is: How do I replicate that process on Ubuntu? Thanks for your help!

  Read the article

• Nginx and Google Appengine Reverse Proxy Security

  - by jmq

  The scenario is that I have a Google compute node running Nginx as a reverse proxy to the google appengine. The appengine is used to service REST calls from an single page application (SPA). HTTPS is used to the Nginx front end from the Internet. Do I also need to make the traffic from the Nginx reverse proxy to the appengine secure by turning on HTTPS on the appengine? I would like to avoid the overhead of HTTPS between the proxy and the backend. My thinking was that once the traffic has arrived at Nginx encrypted, decrypted in Nginx, and then sent via the reverse proxy inside of Google's infrastructure it would be secure. Is it safe in this case to not use HTTPS?

  Read the article

• Network Manager Applet menu freezes and does not respond

  - by pst007x

  Since the latest update in Ubuntu 10.10, the nm-applet has started doing some strange things. I boot up the PC, all is fine, internet works, etc... but after a period of time, approx and hour, the nm-applet menu in the Gnome panel fails to respond. when I click on the icon, the menu appears, all looks well, but when I select any option, eg DISCONNECT, nothing happens. Even the VPN sub menu disappears (no triangle to select the menu.) However I do not lose the network connection... If I Run this script: killall nm-applet /etc/init.d/NetworkManager restart nm-applet all returns as normal, for a while... weird? i tried uninstall/reinstall... I even reinstalled Ubuntu, but once the latest updates are applied this issues arises... Any help?

  Read the article

• AWS EC2 Oracle RDB connection to Oracle Database Instance

  - by llaszews

  Provisioning my Oracle database instance to AWS EC2 RDB was easy. Just a few clicks! However, getting my connection to my Oracle cloud database was not as easy. A couple things that are not obvious (using Oracle SQL Developer): 1. Need to set up a database security group. 2. Need to use end point for the host name. This video is the best one on the internet to explain both points: http://www.youtube.com/watch?v=ocFURuX0eEw

  Read the article

• Mac Grey/White Screen of Death

  - by cust0s

  The other night I updated my iTunes to the latest version (through Software Update) when I came to turn on my computer I was greeted with the dreaded white screen of death. I use an early 2008 iMac 24". I've tried the basic things, unplugging/turning off accessories, trying to boot from the install disk, reseting pram, etc, etc. Still no luck and no change what-so-ever. All I've been able to ascertain that my keyboard still works (by ejecting). I should point out that I did recently replace my Hard drive with a Western Digital Black 500GB (though the computer is well out of warrenty) and I'm a little concerned that the problem could be the screen. Update (18/05/10): I've been told that I could be getting the White/Grey screen of death because the optical flex cable is damaged (aparently this is common). Apparently the Optical Drive is part of the POST sequence, and an inability to read the drive can result in failure for the system to move on to other bootable volumes. More info here. I will disable the optical drive and see if that works.

  Read the article

• Not able to connect huawei ec1561

  - by Nixon Babu

  I have a huawei ec1561 broadband data card, ISP-MTS India. I am not able to connect internet through it. while connecting it via network manager it says "You are registered with home network" and again "Modem network disconnected" . i think it is detected as a modem but not connecting properly. Any help please? I'm hitting this rock with my head more than a month... when I tried installing the driver that came with the device it finally says "Installing NDIS driver failed". I can post further information if anybody helps

  Read the article

< Previous Page | 569 570 571 572 573 574 575 576 577 578 579 580  | Next Page >