Search Results

Search found 14734 results on 590 pages for 'clear cache'.

Page 577/590 | < Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >

  • Users being forced to re-login randomly, before session and auth ticket timeout values are reached

    - by Don
    I'm having reports and complaints from my user that they will be using a screen and get kicked back to the login screen immediately on their next request. It doesn't happen all the time but randomly. After looking at the Web server the error that shows up in the application event log is: Event code: 4005 Event message: Forms authentication failed for the request. Reason: The ticket supplied has expired. Everything that I read starts out with people asking about web gardens or load balancing. We are not using either of those. We're a single Windows 2003 (32-bit OS, 64-bit hardware) Server with IIS6. This is the only website on this server too. This behavior does not generate any application exceptions or visible issues to the user. They just get booted back to the login screen and are forced to login. As you can imagine this is extremely annoying and counter-productive for our users. Here's what I have set in my web.config for the application in the root: <authentication mode="Forms"> <forms name=".TcaNet" protection="All" timeout="40" loginUrl="~/Login.aspx" defaultUrl="~/MyHome.aspx" path="/" slidingExpiration="true" requireSSL="false" /> </authentication> I have also read that if you have some locations setup that no longer exist or are bogus you could have issues. My path attributes are all valid directories so that shouldn't be the problem: <location path="js"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="images"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="anon"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="App_Themes"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> <location path="NonSSL"> <system.web> <authorization> <allow users="*" /> </authorization> </system.web> </location> The only thing I'm not clear on is if my timeout value in the forms property for the auth ticket has to be the same as my session timeout value (defined in the app's configuration in IIS). I've read some things that say you should have the authentication timeout shorter (40) than the session timeout (45) to avoid possible complications. Either way we have users that get kicked to the login screen a minute or two after their last action. So the session definitely should not be expiring. Update 2/23/09: I've since set the session timeout and authentication ticket timeout values to both be 45 and the problem still seems to be happening. The only other web.config in the application is in 1 virtual directory that hosts Community Server. That web.config's authentication settings are as follows: <authentication mode="Forms"> <forms name=".TcaNet" protection="All" timeout="40" loginUrl="~/Login.aspx" defaultUrl="~/MyHome.aspx" path="/" slidingExpiration="true" requireSSL="true" /> </authentication> And while I don't believe it applies unless you're in a web garden, I have both of the machine key values set in both web.config files to be the same (removed for convenience): <machineKey validationKey="<MYVALIDATIONKEYHERE>" decryptionKey="<MYDECRYPTIONKEYHERE>" validation="SHA1" /> <machineKey validationKey="<MYVALIDATIONKEYHERE>" decryptionKey="<MYDECRYPTIONKEYHERE>" validation="SHA1"/> Any help with this would be greatly appreciated. This seems to be one of those problems that yields a ton of Google results, none of which seem to be fitting into my situation so far.

    Read the article

  • Fast multi-window rendering with C#

    - by seb
    I've been searching and testing different kind of rendering libraries for C# days for many weeks now. So far I haven't found a single library that works well on multi-windowed rendering setups. The requirement is to be able to run the program on 12+ monitor setups (financial charting) without latencies on a fast computer. Each window needs to update multiple times every second. While doing this CPU needs to do lots of intensive and time critical tasks so some of the burden has to be shifted to GPUs. That's where hardware rendering steps in, in another words DirectX or OpenGL. I have tried GDI+ with windows forms and figured it's way too slow for my needs. I have tried OpenGL via OpenTK (on windows forms control) which seemed decently quick (I still have some tests to run on it) but painfully difficult to get working properly (hard to find/program good text rendering libraries). Recently I tried DirectX9, DirectX10 and Direct2D with Windows forms via SharpDX. I tried a separate device for each window and a single device/multiple swap chains approaches. All of these resulted in very poor performance on multiple windows. For example if I set target FPS to 20 and open 4 full screen windows on different monitors the whole operating system starts lagging very badly. Rendering is simply clearing the screen to black, no primitives rendered. CPU usage on this test was about 0% and GPU usage about 10%, I don't understand what is the bottleneck here? My development computer is very fast, i7 2700k, AMD HD7900, 16GB ram so the tests should definitely run on this one. In comparison I did some DirectX9 tests on C++/Win32 API one device/multiple swap chains and I could open 100 windows spread all over the 4-monitor workspace (with 3d teapot rotating on them) and still had perfectly responsible operating system (fps was dropping of course on the rendering windows quite badly to around 5 which is what I would expect running 100 simultaneous renderings). Does anyone know any good ways to do multi-windowed rendering on C# or am I forced to re-write my program in C++ to get that performance (major pain)? I guess I'm giving OpenGL another shot before I go the C++ route... I'll report any findings here. Test methods for reference: For C# DirectX one-device multiple swapchain test I used the method from this excellent answer: Display Different images per monitor directX 10 Direct3D10 version: I created the d3d10device and DXGIFactory like this: D3DDev = new SharpDX.Direct3D10.Device(SharpDX.Direct3D10.DriverType.Hardware, SharpDX.Direct3D10.DeviceCreationFlags.None); DXGIFac = new SharpDX.DXGI.Factory(); Then initialized the rendering windows like this: var scd = new SwapChainDescription(); scd.BufferCount = 1; scd.ModeDescription = new ModeDescription(control.Width, control.Height, new Rational(60, 1), Format.R8G8B8A8_UNorm); scd.IsWindowed = true; scd.OutputHandle = control.Handle; scd.SampleDescription = new SampleDescription(1, 0); scd.SwapEffect = SwapEffect.Discard; scd.Usage = Usage.RenderTargetOutput; SC = new SwapChain(Parent.DXGIFac, Parent.D3DDev, scd); var backBuffer = Texture2D.FromSwapChain<Texture2D>(SC, 0); _rt = new RenderTargetView(Parent.D3DDev, backBuffer); Drawing command executed on each rendering iteration is simply: Parent.D3DDev.ClearRenderTargetView(_rt, new Color4(0, 0, 0, 0)); SC.Present(0, SharpDX.DXGI.PresentFlags.None); DirectX9 version is very similar: Device initialization: PresentParameters par = new PresentParameters(); par.PresentationInterval = PresentInterval.Immediate; par.Windowed = true; par.SwapEffect = SharpDX.Direct3D9.SwapEffect.Discard; par.PresentationInterval = PresentInterval.Immediate; par.AutoDepthStencilFormat = SharpDX.Direct3D9.Format.D16; par.EnableAutoDepthStencil = true; par.BackBufferFormat = SharpDX.Direct3D9.Format.X8R8G8B8; // firsthandle is the handle of first rendering window D3DDev = new SharpDX.Direct3D9.Device(new Direct3D(), 0, DeviceType.Hardware, firsthandle, CreateFlags.SoftwareVertexProcessing, par); Rendering window initialization: if (parent.D3DDev.SwapChainCount == 0) { SC = parent.D3DDev.GetSwapChain(0); } else { PresentParameters pp = new PresentParameters(); pp.Windowed = true; pp.SwapEffect = SharpDX.Direct3D9.SwapEffect.Discard; pp.BackBufferFormat = SharpDX.Direct3D9.Format.X8R8G8B8; pp.EnableAutoDepthStencil = true; pp.AutoDepthStencilFormat = SharpDX.Direct3D9.Format.D16; pp.PresentationInterval = PresentInterval.Immediate; SC = new SharpDX.Direct3D9.SwapChain(parent.D3DDev, pp); } Code for drawing loop: SharpDX.Direct3D9.Surface bb = SC.GetBackBuffer(0); Parent.D3DDev.SetRenderTarget(0, bb); Parent.D3DDev.Clear(ClearFlags.Target, Color.Black, 1f, 0); SC.Present(Present.None, new SharpDX.Rectangle(), new SharpDX.Rectangle(), HWND); bb.Dispose(); C++ DirectX9/Win32 API test with multiple swapchains and one device code is here: http://pastebin.com/tjnRvATJ It's a modified version from Kevin Harris's nice example code.

    Read the article

  • How to filter Backbone.js Collection and Rerender App View?

    - by Jeremy H.
    Is is a total Backbone.js noob question. I am working off of the ToDo Backbone.js example trying to build out a fairly simple single app interface. While the todo project is more about user input, this app is more about filtering the data based on the user options (click events). I am completely new to Backbone.js and Mongoose and have been unable to find a good example of what I am trying to do. I have been able to get my api to pull the data from the MongoDB collection and drop it into the Backbone.js collection which renders it in the app. What I cannot for the life of me figure out how to do is filter that data and re-render the app view. I am trying to filter by the "type" field in the document. Here is my script: (I am totally aware of some major refactoring needed, I am just rapid prototyping a concept.) $(function() { window.Job = Backbone.Model.extend({ idAttribute: "_id", defaults: function() { return { attachments: false } } }); window.JobsList = Backbone.Collection.extend({ model: Job, url: '/api/jobs', leads: function() { return this.filter(function(job){ return job.get('type') == "Lead"; }); } }); window.Jobs = new JobsList; window.JobView = Backbone.View.extend({ tagName: "div", className: "item", template: _.template($('#item-template').html()), initialize: function() { this.model.bind('change', this.render, this); this.model.bind('destroy', this.remove, this); }, render: function() { $(this.el).html(this.template(this.model.toJSON())); this.setText(); return this; }, setText: function() { var month=new Array(); month[0]="Jan"; month[1]="Feb"; month[2]="Mar"; month[3]="Apr"; month[4]="May"; month[5]="Jun"; month[6]="Jul"; month[7]="Aug"; month[8]="Sep"; month[9]="Oct"; month[10]="Nov"; month[11]="Dec"; var title = this.model.get('title'); var description = this.model.get('description'); var datemonth = this.model.get('datem'); var dateday = this.model.get('dated'); var jobtype = this.model.get('type'); var jobstatus = this.model.get('status'); var amount = this.model.get('amount'); var paymentstatus = this.model.get('paymentstatus') var type = this.$('.status .jobtype'); var status = this.$('.status .jobstatus'); this.$('.title a').text(title); this.$('.description').text(description); this.$('.date .month').text(month[datemonth]); this.$('.date .day').text(dateday); type.text(jobtype); status.text(jobstatus); if(amount > 0) this.$('.paymentamount').text(amount) if(paymentstatus) this.$('.paymentstatus').text(paymentstatus) if(jobstatus === 'New') { status.addClass('new'); } else if (jobstatus === 'Past Due') { status.addClass('pastdue') }; if(jobtype === 'Lead') { type.addClass('lead'); } else if (jobtype === '') { type.addClass(''); }; }, remove: function() { $(this.el).remove(); }, clear: function() { this.model.destroy(); } }); window.AppView = Backbone.View.extend({ el: $("#main"), events: { "click #leads .highlight" : "filterLeads" }, initialize: function() { Jobs.bind('add', this.addOne, this); Jobs.bind('reset', this.addAll, this); Jobs.bind('all', this.render, this); Jobs.fetch(); }, addOne: function(job) { var view = new JobView({model: job}); this.$("#activitystream").append(view.render().el); }, addAll: function() { Jobs.each(this.addOne); }, filterLeads: function() { // left here, this event fires but i need to figure out how to filter the activity list. } }); window.App = new AppView; });

    Read the article

  • problems in trying ieee 802.15.4 working from msk

    - by asel
    Hi, i took a msk code from dsplog.com and tried to modify it to test the ieee 802.15.4. There are several links on that site for ieee 802.15.4. Currently I am getting simulated ber results all approximately same for all the cases of Eb_No values. Can you help me to find why? thanks in advance! clear PN = [ 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0; 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0; 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0; 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1; 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0 0 0 1 1; 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1 1 1 0 0; 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1 1 0 0 1; 1 0 0 1 1 1 0 0 0 0 1 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 0 1 1 0 1; 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1; 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1; 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1; 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0; 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1 0 1 1 0; 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0 1 0 0 1; 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0 1 1 0 0; 1 1 0 0 1 0 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 1 1 1 0 1 1 1 0 0 0; ]; N = 5*10^5; % number of bits or symbols fsHz = 1; % sampling period T = 4; % symbol duration Eb_N0_dB = [0:10]; % multiple Eb/N0 values ct = cos(pi*[-T:N*T-1]/(2*T)); st = sin(pi*[-T:N*T-1]/(2*T)); for ii = 1:length(Eb_N0_dB) tx = []; % MSK Transmitter ipBit = round(rand(1,N/32)*15); for k=1:length(ipBit) sym = ipBit(k); tx = [tx PN((sym+1),1:end)]; end ipMod = 2*tx - 1; % BPSK modulation 0 -> -1, 1 -> 1 ai = kron(ipMod(1:2:end),ones(1,2*T)); % even bits aq = kron(ipMod(2:2:end),ones(1,2*T)); % odd bits ai = [ai zeros(1,T) ]; % padding with zero to make the matrix dimension match aq = [zeros(1,T) aq ]; % adding delay of T for Q-arm % MSK transmit waveform xt = 1/sqrt(T)*[ai.*ct + j*aq.*st]; % Additive White Gaussian Noise nt = 1/sqrt(2)*[randn(1,N*T+T) + j*randn(1,N*T+T)]; % white gaussian noise, 0dB variance % Noise addition yt = xt + 10^(-Eb_N0_dB(ii)/20)*nt; % additive white gaussian noise % MSK receiver % multiplying with cosine and sine waveforms xE = conv(real(yt).*ct,ones(1,2*T)); xO = conv(imag(yt).*st,ones(1,2*T)); bHat = zeros(1,N); bHat(1:2:end) = xE(2*T+1:2*T:end-2*T); % even bits bHat(2:2:end) = xO(3*T+1:2*T:end-T); % odd bits result=zeros(16,1); chiplen=32; seqstart=1; recovered = []; while(seqstart<length(bHat)) A = bHat(seqstart:seqstart+(chiplen-1)); for j=1:16 B = PN(j,1:end); result(j)=sum(A.*B); end [value,index] = max(result); recovered = [recovered (index-1)]; seqstart = seqstart+chiplen; end; %# create binary string - the 4 forces at least 4 bits bstr1 = dec2bin(ipBit,4); bstr2 = dec2bin(recovered,4); %# convert back to numbers (reshape so that zeros are preserved) out1 = str2num(reshape(bstr1',[],1))'; out2 = str2num(reshape(bstr2',[],1))'; % counting the errors nErr(ii) = size(find([out1 - out2]),2); end nErr/(length(ipBit)*4) % simulated ber theoryBer = 0.5*erfc(sqrt(10.^(Eb_N0_dB/10))) % theoretical ber

    Read the article

  • How to check all check boxes at a click of a button

    - by LivingThing
    I am new to Swing, UI and MVC I have created a code based on MVC. Now my problem is that that in the controller part i have an actioneventlistener which listens to different button clicks. Out of all those buttons i have "select all" and "de-select all". In my view i have a table, one of the column of that table contains "check boxes". Now, when i click the "select-all" button i want to check all the check boxes and with "de-select all" i want to uncheck all of them. Below is my code which is not working. Please tell me what am i doing wrong here. Also, if someone knows a more elagent way please share. Thanks In my view public class CustomerSelectorDialogUI extends JFrame{ public CustomerSelectorDialogUI(TestApplicationUI ownerView, DummyCustomerStore dCStore, boolean modality) { //super(ownerView, modality); setTitle("[=] Customer Selection Dialog [=]"); //setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE); custSelectPanel = new JPanel(); buttonPanel = new JPanel(); selectAllButton = new JButton(" Select All "); clearAllButton = new JButton(" Clear All "); applyButton = new JButton(" Apply "); cancelButton = new JButton(" Cancel "); PopulateAndShow(dCStore, Boolean.FALSE); } public void PopulateAndShow(DummyCustomerStore dCStore, Boolean select) { List data = new ArrayList(); for (Customer customer : dCStore.getAllCustomers()) { Object record[] = new Object[COLUMN_COUNT]; record[0] = (select == false) ? Boolean.FALSE : Boolean.TRUE; record[1] = Integer.toString(customer.customerId); record[2] = customer.fullName; data.add(record); } tModel = new TableModel(data); // In the above for loop accoring to user input (i.e click on check all or // uncheck all) i have tried to update the data. As it can be seen that i // have a condition for record[0]. //After the loop, here i have tried several options like validate(). repaint but to no avail customerTable = new JTable(tModel); scrollPane = new JScrollPane(customerTable); setContentPane(this.createContentPane()); setSize(480, 580); setResizable(false); setVisible(true); } private JPanel createContentPane() { custSelectPanel.setLayout(null); customerTable.setDragEnabled(false); customerTable.setFillsViewportHeight(true); scrollPane.setLocation(10, 10); scrollPane.setSize(450,450); custSelectPanel.add(scrollPane); buttonPanel.setLayout(null); buttonPanel.setLocation(10, 480); buttonPanel.setSize(450, 100); custSelectPanel.add(buttonPanel); selectAllButton.setLocation(0, 0); selectAllButton.setSize(100, 40); buttonPanel.add(selectAllButton); clearAllButton.setLocation(110, 0); clearAllButton.setSize(100, 40); buttonPanel.add(clearAllButton); applyButton.setLocation(240, 0); applyButton.setSize(100, 40); buttonPanel.add(applyButton); cancelButton.setLocation(350, 0); cancelButton.setSize(100, 40); buttonPanel.add(cancelButton); return custSelectPanel; } } Table Model private class TableModel extends AbstractTableModel { private List data; public TableModel(List data) { this.data = data; } private String[] columnNames = {"Selected ", "Customer Id ", "Customer Name " }; public int getColumnCount() { return COLUMN_COUNT; } public int getRowCount() { return data == null ? 0 : data.size(); } public String getColumnName(int col) { return columnNames[col]; } public void setValueAt(Object value, int rowIndex, int columnIndex) { getRecord(rowIndex)[columnIndex] = value; super.fireTableCellUpdated(rowIndex, columnIndex); } private Object[] getRecord(int rowIndex) { return (Object[]) data.get(rowIndex); } public Object getValueAt(int rowIndex, int columnIndex) { return getRecord(rowIndex)[columnIndex]; } public Class getColumnClass(int columnIndex) { if (data == null || data.size() == 0) { return Object.class; } Object o = getValueAt(0, columnIndex); return o == null ? Object.class : o.getClass(); } public boolean isCellEditable(int row, int col) { if (col > 0) { return false; } else { return true; } } } } A Views Action Listener class CustomerSelectorUIListener implements ActionListener{ CustomerSelectorDialogUI custSelectView; Controller controller; public CustomerSelectorUIListener (Controller controller, CustomerSelectorDialogUI custSelectView) { this.custSelectView = custSelectView; this.controller = controller; } @Override public void actionPerformed(ActionEvent e) { String actionEvent = e.getActionCommand(); else if ( actionEvent.equals( "clearAllButton" ) ) { controller.checkButtonControl(false); } else if ( actionEvent.equals( "selectAllButton" ) ) { controller.checkButtonControl(true); } } } Main Controller public class Controller implements ActionListener{ CustomerSelectorDialogUI selectUI; DummyCustomerStore store; public Controller( DummyCustomerStore store, TestApplicationUI appUI ) { this.store = store; this.appUI = appUI; appUI.ButtonListener( this ); } @Override public void actionPerformed(ActionEvent event) { String viewAction = event.getActionCommand(); if (viewAction.equals("TEST")) { selectUI = new CustomerSelectorDialogUI(appUI, store, true); selectUI.showTextActionListeners(new CustomerSelectorUIListener( this, selectUI ) ); selectUI.setVisible( true ); } } public void checkButtonControl (Boolean checkAll) { selectUI.PopulateAndShow(store, checkAll); } }

    Read the article

  • Trying to get these list items to display inline

    - by Joel
    I have several unordered lists that I want to display like this: <ul> <li><img></li> <li><p></li> //inline </ul> //linebreak <ul> <li><img></li> <li><p></li> //inline </ul> ...etc I'm not able to get the li items to be inline with eachother. They are stacking vertically. I have stripped away most styling but still can't figure out what I'm doing wrong: html: <ul class="instrument"> <li class="imagebox"><img src="/images/matepe.jpg" width="247" height="228" alt="Matepe" /></li> <li class="textbox"><p>The matepe is a 24 key instrument that is played by the Kore-Kore people in North-Eastern Zimbabwe and Mozambique. It utilizes four fingers-each playing an individual melody. These melodies also interwieve to create resultant melodies that can be manipulated thru accenting different fingers. The matepe is used in Rattletree as the bridge from the physical world to the spirit world. The matepe is used in the Kore-Kore culture to summon the Mhondoro spirits which are thought to be able to communicate directly with Mwari (God) without the need of an intermediary.</p></li> </ul> <ul class="instrument"> <li class="imagebox"><img src="/images/soprano_little.jpg" border="0" width="247" height="170" alt="Soprano" /></li> <li class="textbox"><p>The highest voice of the Rattletree Marimba orchestra is the Soprano marimba. The soprano is used to whip up the energy on the dancefloor and help people reach ecstatic state with it's high and clear singing voice. The range of these sopranos goes much lower than 'typical' Zimbabwean style sopranos. The sopranos play the range of the right hand of the matepe and go two notes higher and five notes lower. Rattletree uses two sopranos.</p></li> </ul> <ul class="instrument"> <li class="imagebox"><img src="/images/bari_little.jpg" border="0" width="247" height="170" alt="Baritone" /></li> <li class="textbox"><p>The Baritone is the next lower voice in the orchestra. The bari is where the funk is. Generally bubbling over the Bass line, the baritone creates the syncopations and polyrhythms that messes with the 'minds' of the dancers and helps seperate the listener from the physical realm of thought. The range of the baritone covers the full range of the left hand side of the matepe.</p></li> </ul> <ul class="instrument"> <li class="imagebox"><img src="/images/darren_littlebass.jpg" border="0" width="247" height="195" alt="Bass"/><strong>Bass Marimba</strong></li> <li class="textbox"><p>The towering Bass Marimba is the foundation of the Rattletree Marimba sound. Putting out frequencies as low as 22hZ, the bass creates the drive that gets the dancefloor moving. It is 5.5' tall, 9' long, and 4' deep. It is played by standing on a platform and struck with mallets that have lacross-ball size heads (they are actually made with rubber dog balls). The Bass marimba's range covers the lowest five notes of the matepe and goes another five notes lower.</p></li> </ul> <ul class="instrument"> <li class="imagebox"><img src="/images/wayne_little.jpg" border="0" width="247" height="177" alt="Drums"/><strong>Drumset</strong></li> <li class="textbox"><p>All the intricate polyrhythms are held together tastefully with the drumset. The drums provides the consistancy and grounding that the dancers need to keep going all night. While the steady kick and high-hat provide that grounding function, the toms and snare and allowed to be another voice in the poylrhythmic texture-helping the dancers abandon the concept of a "one" within this cyclical music.</p></li> </ul> css: ul.instrument { text-align:left; display:inline; } ul.instrument li { list-style-type: none; } li.imagebox { } li.textbox { } li.textbox p{ width: 247px; }

    Read the article

  • JSF2 - Why does render response not rerender component setting?

    - by fekete-kamosh
    From the tutorial: "If the request is a postback and errors were encountered during the apply request values phase, process validations phase, or update model values phase, the original page is rendered during Render response phase" (http://java.sun.com/javaee/5/docs/tutorial/doc/bnaqq.html) Does it mean that if view is restored in "Restore View" phase and then any apply request/validation/update model phase fails and skips to "Render response" that Render response only passes restored view without any changes to client? Managed Bean: package cz.test; import javax.faces.bean.ManagedBean; import javax.faces.bean.RequestScoped; @ManagedBean @RequestScoped public class TesterBean { // Simple DataStore (in real world EJB) private static String storedSomeValue = null; private String someValue; public TesterBean() { } public String storeValue() { storedSomeValue = someValue; return "index"; } public String eraseValue() { storedSomeValue = null; return "index"; } public String getSomeValue() { someValue = storedSomeValue; return someValue; } public void setSomeValue(String someValue) { this.someValue = someValue; } } Composite component: <?xml version='1.0' encoding='ISO-8859-1' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:composite="http://java.sun.com/jsf/composite" xmlns:c="http://java.sun.com/jsp/jstl/core"> <!-- INTERFACE --> <composite:interface> <composite:attribute name="currentBehaviour" type="java.lang.String" required="true"/> <composite:attribute name="fieldValue" required="true"/> </composite:interface> <!-- IMPLEMENTATION --> <composite:implementation> <h:panelGrid columns="3"> <c:choose> <c:when test="#{cc.attrs.currentBehaviour == 'READONLY'}" > <h:outputText id="fieldValue" value="#{cc.attrs.fieldValue}"> </h:outputText> </c:when> <c:when test="#{cc.attrs.currentBehaviour == 'MANDATORY'}" > <h:inputText id="fieldValue" value="#{cc.attrs.fieldValue}" required="true"> <f:attribute name="requiredMessage" value="Field is mandatory"/> <c:if test="#{empty cc.attrs.fieldValue}"> <f:attribute name="style" value="background-color: yellow;"/> </c:if> </h:inputText>&nbsp;* </c:when> <c:when test="#{cc.attrs.currentBehaviour == 'OPTIONAL'}" > <h:inputText id="fieldValue" value="#{cc.attrs.fieldValue}"> </h:inputText> </c:when> </c:choose> <h:message for="fieldValue" style="color:red;" /> </h:panelGrid> </composite:implementation> Page: <?xml version='1.0' encoding='UTF-8' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:ez="http://java.sun.com/jsf/composite/components"> <h:head> <title>Testing page</title> </h:head> <h:body> <h:form> <h:outputText value="Some value:"/> <ez:field-component currentBehaviour="MANDATORY" fieldValue="#{testerBean.someValue}"/> <h:commandButton value="Store" action="#{testerBean.storeValue}"/> <h:commandButton value="Erase" action="#{testerBean.eraseValue}" immediate="true"/> </h:form> <br/><br/> <b>Why is field's background color not set to yellow?</b> <ol> <li>NOTICE: Field has yellow background color (mandatory field with no value)</li> <li>Fill in any value (eg. "Hello") and press Store</li> <li>NOTICE: Yellow background disappeared (as mandatory field has value)</li> <li>Clear text in the field and press Store</li> <li><b>QUESTION: Why is field's background color not set to yellow?</b></li> <li>Press Erase</li> <li>NOTICE: Field has yellow background color (mandatory field with no value)</li> </ol> </h:body>

    Read the article

  • NSOutlineView not refreshing when objects added to managed object context from NSOperations

    - by John Gallagher
    Background Cocoa app using core data Two processes - daemon and a main UI Daemon constantly writing to a data store UI process reads from same data store NSOutlineView in UI is bound to an NSTreeController which is bound to Application with key path of delegate.interpretedMOC What I want When the UI is activated, the outline view should update with the latest data inserted by the daemon. The Problem Main Thread Approach I fetch all the entities I'm interested in, then iterate over them, doing refreshObject:mergeChanges:YES. This works OK - the items get refreshed correctly. However, this is all running on the main thread, so the UI locks up for 10-20 seconds whilst it refreshes. Fine, so let's move these refreshes to NSOperations that run in the background instead. NSOperation Multithreaded Approach As soon as I move the refreshObject:mergeChanges: call into an NSOperation, the refresh no longer works. When I add logging messages, it's clear that the new objects are loaded in by the NSOperation subclass and refreshed. Not only that, but they are What I've tried I've messed around with this for 2 days solid and tried everything I can think of. Passing objectIDs to the NSOperation to refresh instead of an entity name. Resetting the interpretedMOC at various points - after the data refresh and before the outline view reload. I'd subclassed NSOutlineView. I discarded my subclass and set the view back to being an instance of NSOutlineView, just in case there was any funny goings on here. Added a rearrangeObjects call to the NSTreeController before reloading the NSOutlineView data. Made sure I had set the staleness interval to 0 on all managed object contexts I was using. I've got a feeling this problem is somehow related to caching core data objects in memory. But I've totally exhausted all my ideas on how I get this to work. I'd be eternally grateful of any ideas anyone else has. Code Main Thread Approach // In App Delegate -(void)applicationDidBecomeActive:(NSNotification *)notification { // Delay to allow time for the daemon to save [self performSelector:@selector(refreshTrainingEntriesAndGroups) withObject:nil afterDelay:3]; } -(void)refreshTrainingEntriesAndGroups { NSSet *allTrainingGroups = [[[NSApp delegate] interpretedMOC] fetchAllObjectsForEntityName:kTrainingGroup]; for(JGTrainingGroup *thisTrainingGroup in allTrainingGroups) [interpretedMOC refreshObject:thisTrainingGroup mergeChanges:YES]; NSError *saveError = nil; [interpretedMOC save:&saveError]; [windowController performSelectorOnMainThread:@selector(refreshTrainingView) withObject:nil waitUntilDone:YES]; } // In window controller class -(void)refreshTrainingView { [trainingViewTreeController rearrangeObjects]; // Didn't really expect this to have any effect. And it didn't. [trainingView reloadData]; } NSOperation Multithreaded Approach // In App Delegate -(void)refreshTrainingEntriesAndGroups { JGRefreshEntityOperation *trainingGroupRefresh = [[JGRefreshEntityOperation alloc] initWithEntityName:kTrainingGroup]; NSOperationQueue *refreshQueue = [[NSOperationQueue alloc] init]; [refreshQueue setMaxConcurrentOperationCount:1]; [refreshQueue addOperation:trainingGroupRefresh]; while ([[refreshQueue operations] count] > 0) { [[NSRunLoop currentRunLoop] runUntilDate:[NSDate dateWithTimeIntervalSinceNow:0.05]]; [windowController performSelectorOnMainThread:@selector(refreshTrainingView) withObject:nil waitUntilDone:YES]; } // JGRefreshEntityOperation.m @implementation JGRefreshEntityOperation @synthesize started; @synthesize executing; @synthesize paused; @synthesize finished; -(void)main { [self startOperation]; NSSet *allEntities = [imoc fetchAllObjectsForEntityName:entityName]; for(id thisEntity in allEntities) [imoc refreshObject:thisEntity mergeChanges:YES]; [self finishOperation]; } -(void)startOperation { [self willChangeValueForKey:@"isExecuting"]; [self willChangeValueForKey:@"isStarted"]; [self setStarted:YES]; [self setExecuting:YES]; [self didChangeValueForKey:@"isExecuting"]; [self didChangeValueForKey:@"isStarted"]; imoc = [[NSManagedObjectContext alloc] init]; [imoc setStalenessInterval:0]; [imoc setUndoManager:nil]; [imoc setPersistentStoreCoordinator:[[NSApp delegate] interpretedPSC]]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(mergeChanges:) name:NSManagedObjectContextDidSaveNotification object:imoc]; } -(void)finishOperation { saveError = nil; [imoc save:&saveError]; if (saveError) { NSLog(@"Error saving. %@", saveError); } imoc = nil; [self willChangeValueForKey:@"isExecuting"]; [self willChangeValueForKey:@"isFinished"]; [self setExecuting:NO]; [self setFinished:YES]; [self didChangeValueForKey:@"isExecuting"]; [self didChangeValueForKey:@"isFinished"]; } -(void)mergeChanges:(NSNotification *)notification { NSManagedObjectContext *mainContext = [[NSApp delegate] interpretedMOC]; [mainContext performSelectorOnMainThread:@selector(mergeChangesFromContextDidSaveNotification:) withObject:notification waitUntilDone:YES]; } -(id)initWithEntityName:(NSString *)entityName_ { [super init]; [self setStarted:false]; [self setExecuting:false]; [self setPaused:false]; [self setFinished:false]; [NSThread setThreadPriority:0.0]; entityName = entityName_; return self; } @end // JGRefreshEntityOperation.h @interface JGRefreshEntityOperation : NSOperation { NSString *entityName; NSManagedObjectContext *imoc; NSError *saveError; BOOL started; BOOL executing; BOOL paused; BOOL finished; } @property(readwrite, getter=isStarted) BOOL started; @property(readwrite, getter=isPaused) BOOL paused; @property(readwrite, getter=isExecuting) BOOL executing; @property(readwrite, getter=isFinished) BOOL finished; -(void)startOperation; -(void)finishOperation; -(id)initWithEntityName:(NSString *)entityName_; -(void)mergeChanges:(NSNotification *)notification; @end

    Read the article

  • SQL query performance optimization (TimesTen)

    - by Sergey Mikhanov
    Hi community, I need some help with TimesTen DB query optimization. I made some measures with Java profiler and found the code section that takes most of the time (this code section executes the SQL query). What is strange that this query becomes expensive only for some specific input data. Here’s the example. We have two tables that we are querying, one represents the objects we want to fetch (T_PROFILEGROUP), another represents the many-to-many link from some other table (T_PROFILECONTEXT_PROFILEGROUPS). We are not querying linked table. These are the queries that I executed with DB profiler running (they are the same except for the ID): Command> select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; < 1169655247309537280 > < 1169655249792565248 > < 1464837997699399681 > 3 rows found. Command> select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928; < 1169655247309537280 > 1 row found. This is what I have in the profiler: 12:14:31.147 1 SQL 2L 6C 10825P Preparing: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272 12:14:31.147 2 SQL 4L 6C 10825P sbSqlCmdCompile ()(E): (Found already compiled version: refCount:01, bucket:47) cmdType:100, cmdNum:1146695. 12:14:31.147 3 SQL 4L 6C 10825P Opening: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:31.147 4 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:31.148 5 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:31.148 6 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:31.228 7 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:31.228 8 SQL 4L 6C 10825P Closing: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1464837998949302272; 12:14:35.243 9 SQL 2L 6C 10825P Preparing: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928 12:14:35.243 10 SQL 4L 6C 10825P sbSqlCmdCompile ()(E): (Found already compiled version: refCount:01, bucket:44) cmdType:100, cmdNum:1146697. 12:14:35.243 11 SQL 4L 6C 10825P Opening: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928; 12:14:35.243 12 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928; 12:14:35.243 13 SQL 4L 6C 10825P Fetching: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928; 12:14:35.243 14 SQL 4L 6C 10825P Closing: select G.M_ID from T_PROFILECONTEXT_PROFILEGROUPS CG, T_PROFILEGROUP G where CG.M_ID_EID = G.M_ID and CG.M_ID_OID = 1466585677823868928; It’s clear that the first query took almost 100ms, while the second was executed instantly. It’s not about queries precompilation (the first one is precompiled too, as same queries happened earlier). We have DB indices for all columns used here: T_PROFILEGROUP.M_ID, T_PROFILECONTEXT_PROFILEGROUPS.M_ID_OID and T_PROFILECONTEXT_PROFILEGROUPS.M_ID_EID. My questions are: Why querying the same set of tables yields such a different performance for different parameters? Which indices are involved here? Is there any way to improve this simple query and/or the DB to make it faster? UPDATE: to give the feeling of size: Command> select count(*) from T_PROFILEGROUP; < 183840 > 1 row found. Command> select count(*) from T_PROFILECONTEXT_PROFILEGROUPS; < 2279104 > 1 row found.

    Read the article

  • Making hovor state of hidden list visible when page is active

    - by Joel
    Hi guys, One day I hope to not be such a newbie on this stuff, but some of this feels so insurmountable sometimes! OK. I have a nav bar with hidden li items that are visible when hovered over. Here's the live site: http://www.rattletree.com Here's the code for the nav: <ul id="navbar"> <li id="iex"><a href="index.php">About Rattletree</a></li> <li id="upcomgshows"><a href="upcomingshows.php">Calendar</a></li> <li id="sods"><a href="#">Sights &amp; Sounds</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png" alt="" /></li> <li class="innerlist"><a href="/playlist.m3u" target="_blank" onclick="javascript:BatmoAudioPop('Rattletree Marimba',this.href,'1'); return false">Listen</a></li> <li class="innerlist"><a href="/new_pictures.php">Photos</a></li> <li class="innerlist"><a href="/video.php">Video</a></li> <li class="innerlist"><a href="/press.php">Press</a></li> </ul> </li> <li id="bookin"><a href="#">Contact</a> <ul class="innerlist"> <li class="innerlist"><img class="arrowAdjust" src="images/curved_arrow.png" alt="" /></li> <li class="innerlist"><a href="/booking.php">Booking Info</a></li> <li class="innerlist"><a href="/media.php">Media Inquiries</a></li> </ul> </li> <li id="ste"> <a href="/sounds.php">Store</a></li> <li id="instrumes"><a href="/instruments.php">The Instruments</a></li> <li id="classe"><a href="classes.php">Workshops</a></li> </ul> css: div#navbar2 { background-color:#546F8B; border-bottom:1px solid #546F8B; border-top:1px solid #000000; display:inline-block; position:relative; width:100%; } div#navbar2 ul#navbar { color:#FFFFFF; font-family:Arial,Helvetica,sans-serif; font-size:16px; letter-spacing:1px; margin:10px 0; padding:0; white-space:nowrap; } div#navbar2 ul#navbar li ul.innerlist { color:#000000; display:none; position:relative; z-index:20; } div#navbar2 ul#navbar li { display:inline; list-style-type:none; margin:0; padding:0; position:relative; } Now it's a bit tricky what I want to do: If a user navigates to one of the innerlist pages, I'd like that innerlist ul to remain visible (with the specific li displaying the hovered state). Now I think I could figure that out on my own, but you can see on the live page that if the user is on a page from the innerlist and that list was visible, then if they hovered over the other nav tab, then those innerlists would overlap. This is a problem. Hopefully that last sentence makes sense! In short: I need to keep the inner list of the active page displaying, BUT if the user hovers over another nav button WITH it's own inner list, then the live innerlist needs to disappear. Clear as mud?

    Read the article

  • Does there exist an "idea checkout system" on the Internet?

    - by TimeSpace Traveller
    Greetings. I would like to ask the following question: is there anything on the Internet like an "idea checkout" system? Situation: I'm a software developer. Since my current job has started 2 years ago, my mentor at that time has pointed me to the open source world. I have only put little time to look at some of the open source projects, let alone any contribution. However, it is my wish to start developing something outside of the work. Well, except a little problem. I don't know what to develop! It is not about the technical knowledge; the problem is that, I am not a creative person. I am very good at analytical thinking, as well as debugging skills. When being told by my work partners to develop a solution, I could get it done without a problem. However, outside of work, I have no idea what to develop. When I look at the Internet, it seems that so many people have already been developing on so many interesting stuff, making me wonder what I could develop, so that I would not reinvent something already existed. That starts to make me wonder. On the Internet, is there anything like an "idea checkout" system or society? For example, some people would throw in as a software idea, and the system would keep it as an "inventory"; later, a potential software developer would "check out" the idea, just a how people would check out a book from the library. Then, the developer would check the "idea" back in, with a certain kind of work-in-progress or developed software, thus becoming an open-source project. I have just noticed that here at stackoverflow, there is a "Project-Ideas" tag, so perhaps that can provide me some ideas on what to develop; still, my wonder is about a system that people would provide ideas, and people would check out ideas to develop / implement into actual solution. Is there such a system or society existing anywhere on the Internet? Any input is welcome! Thank you very much. Update: Thank you for everyone who has answered my question. Certainly, "getting idea" is part of my problem; as a software developer, however, I'm concerned more than just "getting idea". What I am concerned more, as I have commented, is about the existence of such an idea exchanging ecosystem, capable to initiate open-source projects. I'll put an example here. Say, person A has an idea of music search program, but not search by the attributes of the music (composer, singer, publisher, lyrics, etc.); instead, he wants a program (and a database) to search a piece of music by melody. Very often, people only remember a piece of music by its melody, not even the name of the music (e.g. the music he wants was only once heard in a bookstore, but the melody just gets stuck in his head!). In order to find that piece, normally he would just need to blindly search for it, and spent a long time to do so. A search by melody would enable person A to find the piece much quicker. However, he would not want to personally work on it, not just because of the complexity (he is not a musician and/or programmer, knowing almost nothing about music systems in computer, search algorithms, etc.), but also legal issues (RIAA??), thus he would just like to keep the idea at some place, and let other people to work on that. Now, a developer (person B) may be at the same stage as I am right now, wishing to find something to develop, but not having an idea. With the idea exchanging ecosystem, person B will search, and somehow discover person A's music search idea, and feeling interested enough to work on it. So he "checks out" the idea, start working on it (at least a skeleton), and checks back in with the progress. An open-source project starts from here, fulfilling person A's wish, and person B's programming desire. The above is just an example, because there are already such systems exist on the Internet, but it illustrates what I think about the idea exchange system in my mind. My main concern is about idea exchanging ecosystem, not at personal and unorganized level, but at a semi-organized protocol that's specifically for software developers, having actual projects coming out as the fruits. Not about "projects", but about "ideas and product of ideas". Hopefully that would clear up some of the original idea of this question. Any input is welcome; in fact, I would like to hear as many people as possible how everyone thinks about this. Thank you very much!

    Read the article

  • Display database content which is last inserted using last inserted ID

    - by user2330772
    What i am doing is i am displaying last inserted data when form data is submitted,the form is multipart/form-data. I am getting this form data using jquery,here i am sending this data to php file using Ajax POST.In that php file i am inserting that data in db table..where i am getting the id of inserted data..on success of Ajax call i am sending that id to another PHP file..where using that id i am displaying the last inserted data... My form is: <form method="post" enctype="multipart/form-data" name="upload_form" id="data"> <select id="sel"> <option>Select the Project Stream</option> <option value="1">Computer Science</option> <option value="2">Mechanical</option> <option value="3">IT</option> <option value="4">Web Development</option> <option value="5">MCA</option> <option value="6">Civil</option> </select><br /> <input type="text" id="title" placeholder="Project Title"/><br /> <input type="text" id="vurl" placeholder="If You have any video about project write your video url path here" style="width:435px;"/><br /> <textarea id="prjdesc" name="prjdesc" rows="20" cols="80" style="border-style:groove;box-shadow: 10px 10px 10px 10px #888888;"placeholder="Please describe Your Project"></textarea> <label for="file">Filename:</label> <input type="file" name="file" id="file"/><br /> <button>Submit</button> </form> My js file: $("form#data").submit(function() { alert("update"); var sid=$("#sel").val(); alert(sid); var ttle = $("#title").val(); alert(ttle); var text = $("#prjdesc").val(); var vurl = $("#vurl").val(); /*var dataString = 'param='+text+'&param1='+vurl+'&param2='+ttle+'&param3='+id;*/ var formData = new FormData($(this)[0]); formData.append('param',text); formData.append('param1',vurl); formData.append('param2',ttle ); formData.append('param3',sid ); $.ajax({ type:'POST', data:formData, url:'insert.php', success:function(id) { alert(id); window.location ="another.php?id="+id; }, cache: false, contentType: false, processData: false }); return false; }); insert.php: <?php print_r($_FILES); $desc = $_POST['param']; echo $desc; $video = $_POST['param1']; echo $video ; $title = $_POST['param2']; echo $title; $tech_id=$_POST['param3']; echo $tech_id; $host="localhost"; $username="root"; $password=""; $db_name="geny"; $tbl_name="project_details"; mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); $allowedExts = array("gif", "jpeg", "jpg", "png"); $extension = end(explode(".", $_FILES["file"]["name"])); $url_dir = "C:/wamp/www/WebsiteTemplate4/upload/"; if ((($_FILES["file"]["type"] == "image/gif") || ($_FILES["file"]["type"] == "image/jpeg") || ($_FILES["file"]["type"] == "image/jpg") || ($_FILES["file"]["type"] == "image/pjpeg") || ($_FILES["file"]["type"] == "image/x-png") || ($_FILES["file"]["type"] == "image/png")) && ($_FILES["file"]["size"] < 50000) && in_array($extension, $allowedExts)) { if ($_FILES["file"]["error"] > 0) { echo "Return Code: " . $_FILES["file"]["error"] . "<br>"; } else { if (file_exists($url_dir . $_FILES["file"]["name"])) { echo $_FILES["file"]["name"] . " already exists. "; } else { move_uploaded_file($_FILES["file"]["tmp_name"],$url_dir. $_FILES["file"]["name"]); // echo "Stored in: " . "upload/" . $_FILES["file"]["name"]; $tmp = "C:/wamp/www/WebsiteTemplate4/upload/" . $_FILES["file"]["name"]; $sql="INSERT INTO $tbl_name (title, content, img_path, video_url, project_tech_Id) VALUES ('$title','$desc','$tmp','$video','$tech_id')"; if(mysql_query($sql)) { echo mysql_insert_id(); } else { echo "Cannot Insert"; } } } } else { echo "Invalid file"; } ?> another.php: <?php $temp=$_GET['id']; echo $temp; $host="localhost"; $username="root"; $password=""; $db_name="geny"; $tbl_name="project_details"; mysql_connect("$host", "$username", "$password")or die("cannot connect"); mysql_select_db("$db_name")or die("cannot select DB"); $query = mysql_query("SELECT content FROM project_details WHERE id=". $temp); if (!$query) { echo 'Could not run query: ' . mysql_error(); exit; } $row = mysql_fetch_row($query); echo "<div id='uprjct' style='background:#336699;'> <p>$row[0]</p> </div>"; ?> but the ID what i am returning in insert.php containg array of elements...i dont want all these thing i want only ID(which is number).. please tell me what is wrong in my code...

    Read the article

  • Ignoring focusLost(), SWT.Verify, or other SWT listeners in Java code.

    - by Zoot
    Outside of the actual SWT listener, is there any way to ignore a listener via code? For example, I have a java program that implements SWT Text Widgets, and the widgets have: SWT.Verify listeners to filter out unwanted text input. ModifyListeners to wait for the correct number of valid input characters and automatically set focus (using setFocus())to the next valid field, skipping the other text widgets in the tab order. focusLost(FocusEvent) FocusListeners that wait for the loss of focus from the text widget to perform additional input verification and execute an SQL query based on the user input. The issue I run into is clearing the text widgets. One of the widgets has the format "####-##" (Four Numbers, a hyphen, then two numbers) and I have implemented this listener, which is a modified version of SWT Snippet Snippet179. The initial text for this text widget is " - " to provide visual feedback to the user as to the expected format. Only numbers are acceptable input, and the program automatically skips past the hyphen at the appropriate point. /* * This listener was adapted from the "verify input in a template (YYYY/MM/DD)" SWT Code * Snippet (also known as Snippet179), from the Snippets page of the SWT Project. * SWT Code Snippets can be found at: * http://www.eclipse.org/swt/snippets/ */ textBox.addListener(SWT.Verify, new Listener() { boolean ignore; public void handleEvent(Event e) { if (ignore) return; e.doit = false; StringBuffer buffer = new StringBuffer(e.text); char[] chars = new char[buffer.length()]; buffer.getChars(0, chars.length, chars, 0); if (e.character == '\b') { for (int i = e.start; i < e.end; i++) { switch (i) { case 0: /* [x]xxx-xx */ case 1: /* x[x]xx-xx */ case 2: /* xx[x]x-xx */ case 3: /* xxx[x]-xx */ case 5: /* xxxx-[x]x */ case 6: /* xxxx-x[x] */ { buffer.append(' '); break; } case 4: /* xxxx[-]xx */ { buffer.append('-'); break; } default: return; } } textBox.setSelection(e.start, e.start + buffer.length()); ignore = true; textBox.insert(buffer.toString()); ignore = false; textBox.setSelection(e.start, e.start); return; } int start = e.start; if (start > 6) return; int index = 0; for (int i = 0; i < chars.length; i++) { if (start + index == 4) { if (chars[i] == '-') { index++; continue; } buffer.insert(index++, '-'); } if (chars[i] < '0' || '9' < chars[i]) return; index++; } String newText = buffer.toString(); int length = newText.length(); textBox.setSelection(e.start, e.start + length); ignore = true; textBox.insert(newText); ignore = false; /* * After a valid key press, verifying if the input is completed * and passing the cursor to the next text box. */ if (7 == textBox.getCaretPosition()) { /* * Attempting to change the text after receiving a known valid input that has no results (0000-00). */ if ("0000-00".equals(textBox.getText())) { // "0000-00" is the special "Erase Me" code for these text boxes. ignore = true; textBox.setText(" - "); ignore = false; } // Changing focus to a different textBox by using "setFocus()" method. differentTextBox.setFocus(); } } } ); As you can see, the only method I've figured out to clear this text widget from a different point in the code is by assigning "0000-00" textBox.setText("000000") and checking for that input in the listener. When that input is received, the listener changes the text back to " - " (four spaces, a hyphen, then two spaces). There is also a focusLost Listener that parses this text widget for spaces, then in order to avoid unnecessary SQL queries, it clears/resets all fields if the input is invalid (i.e contains spaces). // Adding focus listener to textBox to wait for loss of focus to perform SQL statement. textBox.addFocusListener(new FocusAdapter() { @Override public void focusLost(FocusEvent evt) { // Get the contents of otherTextBox and textBox. (otherTextBox must be <= textBox) String boxFour = otherTextBox.getText(); String boxFive = textBox.getText(); // If either text box has spaces in it, don't perform the search. if (boxFour.contains(" ") || boxFive.contains(" ")) { // Don't perform SQL statements. Debug statement. System.out.println("Tray Position input contains spaces. Ignoring."); //Make all previous results invisible, if any. labels.setVisible(false); differentTextBox.setText(""); labelResults.setVisible(false); } else { //... Perform SQL statement ... } } } ); OK. Often, I use SWT MessageBox widgets in this code to communicate to the user, or wish to change the text widgets back to an empty state after verifying the input. The problem is that messageboxes seem to create a focusLost event, and using the .setText(string) method is subject to SWT.Verify listeners that are present on the text widget. Any suggestions as to selectively ignoring these listeners in code, but keeping them present for all other user input? Thank you in advance for your assistance.

    Read the article

  • Authoritative sources about Database vs. Flatfile decision

    - by FastAl
    <tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

    Read the article

  • Azure Diagnostics wrt Custom Logs and honoring scheduledTransferPeriod

    - by kjsteuer
    I have implemented my own TraceListener similar to http://blogs.technet.com/b/meamcs/archive/2013/05/23/diagnostics-of-cloud-services-custom-trace-listener.aspx . One thing I noticed is that that logs show up immediately in My Azure Table Storage. I wonder if this is expected with Custom Trace Listeners or because I am in a development environment. My diagnosics.wadcfg <?xml version="1.0" encoding="utf-8"?> <DiagnosticMonitorConfiguration configurationChangePollInterval="PT1M""overallQuotaInMB="4096" xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration"> <DiagnosticInfrastructureLogs scheduledTransferLogLevelFilter="Information" /> <Directories scheduledTransferPeriod="PT1M"> <IISLogs container="wad-iis-logfiles" /> <CrashDumps container="wad-crash-dumps" /> </Directories> <Logs bufferQuotaInMB="0" scheduledTransferPeriod="PT30M" scheduledTransferLogLevelFilter="Information" /> </DiagnosticMonitorConfiguration> I have changed my approach a bit. Now I am defining in the web config of my webrole. I notice when I set autoflush to true in the webconfig, every thing works but scheduledTransferPeriod is not honored because the flush method pushes to the table storage. I would like to have scheduleTransferPeriod trigger the flush or trigger flush after a certain number of log entries like the buffer is full. Then I can also flush on server shutdown. Is there any method or event on the CustomTraceListener where I can listen to the scheduleTransferPeriod? <system.diagnostics> <!--http://msdn.microsoft.com/en-us/library/sk36c28t(v=vs.110).aspx By default autoflush is false. By default useGlobalLock is true. While we try to be threadsafe, we keep this default for now. Later if we would like to increase performance we can remove this. see http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.usegloballock(v=vs.110).aspx --> <trace> <listeners> <add name="TableTraceListener" type="Pos.Services.Implementation.TableTraceListener, Pos.Services.Implementation" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> I have modified the custom trace listener to the following: namespace Pos.Services.Implementation { class TableTraceListener : TraceListener { #region Fields //connection string for azure storage readonly string _connectionString; //Custom sql storage table for logs. //TODO put in config readonly string _diagnosticsTable; [ThreadStatic] static StringBuilder _messageBuffer; readonly object _initializationSection = new object(); bool _isInitialized; CloudTableClient _tableStorage; readonly object _traceLogAccess = new object(); readonly List<LogEntry> _traceLog = new List<LogEntry>(); #endregion #region Constructors public TableTraceListener() : base("TableTraceListener") { _connectionString = RoleEnvironment.GetConfigurationSettingValue("DiagConnection"); _diagnosticsTable = RoleEnvironment.GetConfigurationSettingValue("DiagTableName"); } #endregion #region Methods /// <summary> /// Flushes the entries to the storage table /// </summary> public override void Flush() { if (!_isInitialized) { lock (_initializationSection) { if (!_isInitialized) { Initialize(); } } } var context = _tableStorage.GetTableServiceContext(); context.MergeOption = MergeOption.AppendOnly; lock (_traceLogAccess) { _traceLog.ForEach(entry => context.AddObject(_diagnosticsTable, entry)); _traceLog.Clear(); } if (context.Entities.Count > 0) { context.BeginSaveChangesWithRetries(SaveChangesOptions.None, (ar) => context.EndSaveChangesWithRetries(ar), null); } } /// <summary> /// Creates the storage table object. This class does not need to be locked because the caller is locked. /// </summary> private void Initialize() { var account = CloudStorageAccount.Parse(_connectionString); _tableStorage = account.CreateCloudTableClient(); _tableStorage.GetTableReference(_diagnosticsTable).CreateIfNotExists(); _isInitialized = true; } public override bool IsThreadSafe { get { return true; } } #region Trace and Write Methods /// <summary> /// Writes the message to a string buffer /// </summary> /// <param name="message">the Message</param> public override void Write(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.Append(message); } /// <summary> /// Writes the message with a line breaker to a string buffer /// </summary> /// <param name="message"></param> public override void WriteLine(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.AppendLine(message); } /// <summary> /// Appends the trace information and message /// </summary> /// <param name="eventCache">the Event Cache</param> /// <param name="source">the Source</param> /// <param name="eventType">the Event Type</param> /// <param name="id">the Id</param> /// <param name="message">the Message</param> public override void TraceEvent(TraceEventCache eventCache, string source, TraceEventType eventType, int id, string message) { base.TraceEvent(eventCache, source, eventType, id, message); AppendEntry(id, eventType, eventCache); } /// <summary> /// Adds the trace information to a collection of LogEntry objects /// </summary> /// <param name="id">the Id</param> /// <param name="eventType">the Event Type</param> /// <param name="eventCache">the EventCache</param> private void AppendEntry(int id, TraceEventType eventType, TraceEventCache eventCache) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); var message = _messageBuffer.ToString(); _messageBuffer.Length = 0; if (message.EndsWith(Environment.NewLine)) message = message.Substring(0, message.Length - Environment.NewLine.Length); if (message.Length == 0) return; var entry = new LogEntry() { PartitionKey = string.Format("{0:D10}", eventCache.Timestamp >> 30), RowKey = string.Format("{0:D19}", eventCache.Timestamp), EventTickCount = eventCache.Timestamp, Level = (int)eventType, EventId = id, Pid = eventCache.ProcessId, Tid = eventCache.ThreadId, Message = message }; lock (_traceLogAccess) _traceLog.Add(entry); } #endregion #endregion } }

    Read the article

  • Help needed with Javascript Variable Scope / OOP and Call Back Functions

    - by gargantaun
    I think this issue goes beyond typical variable scope and closure stuff, or maybe I'm an idiot. Here goes anyway... I'm creating a bunch of objects on the fly in a jQuery plugin. The object look something like this function WedgePath(canvas){ this.targetCanvas = canvas; this.label; this.logLabel = function(){ console.log(this.label) } } the jQuery plugin looks something like this (function($) { $.fn.myPlugin = function() { return $(this).each(function() { // Create Wedge Objects for(var i = 1; i <= 30; i++){ var newWedge = new WedgePath(canvas); newWedge.label = "my_wedge_"+i; globalFunction(i, newWedge]); } }); } })(jQuery); So... the plugin creates a bunch of wedgeObjects, then calls 'globalFunction' for each one, passing in the latest WedgePath instance. Global function looks like this. function globalFunction(indicator_id, pWedge){ var targetWedge = pWedge; targetWedge.logLabel(); } What happens next is that the console logs each wedges label correctly. However, I need a bit more complexity inside globalFunction. So it actually looks like this... function globalFunction(indicator_id, pWedge){ var targetWedge = pWedge; someSql = "SELECT * FROM myTable WHERE id = ?"; dbInterface.executeSql(someSql, [indicator_id], function(transaction, result){ targetWedge.logLabel(); }) } There's a lot going on here so i'll explain. I'm using client side database storage (WebSQL i call it). 'dbInterface' an instance of a simple javascript object I created which handles the basics of interacting with a client side database [shown at the end of this question]. the executeSql method takes up to 4 arguments The SQL String an optional arguments array an optional onSuccess handler an optional onError handler (not used in this example) What I need to happen is: When the WebSQL query has completed, it takes some of that data and manipulates some attribute of a particular wedge. But, when I call 'logLabel' on an instance of WedgePath inside the onSuccess handler, I get the label of the very last instance of WedgePath that was created way back in the plugin code. Now I suspect that the problem lies in the var newWedge = new WedgePath(canvas); line. So I tried pushing each newWedge into an array, which I thought would prevent that line from replacing or overwriting the WedgePath instance at every iteration... wedgeArray = []; // Inside the plugin... for(var i = 1; i <= 30; i++){ var newWedge = new WedgePath(canvas); newWedge.label = "my_wedge_"+i; wedgeArray.push(newWedge); } for(var i = 0; i < wedgeArray.length; i++){ wedgeArray[i].logLabel() } But again, I get the last instance of WedgePath to be created. This is driving me nuts. I apologise for the length of the question but I wanted to be as clear as possible. END ============================================================== Also, here's the code for dbInterface object should it be relevant. function DatabaseInterface(db){ var DB = db; this.sql = function(sql, arr, pSuccessHandler, pErrorHandler){ successHandler = (pSuccessHandler) ? pSuccessHandler : this.defaultSuccessHandler; errorHandler = (pErrorHandler) ? pErrorHandler : this.defaultErrorHandler; DB.transaction(function(tx){ if(!arr || arr.length == 0){ tx.executeSql(sql, [], successHandler, errorHandler); }else{ tx.executeSql(sql,arr, successHandler, errorHandler) } }); } // ---------------------------------------------------------------- // A Default Error Handler // ---------------------------------------------------------------- this.defaultErrorHandler = function(transaction, error){ // error.message is a human-readable string. // error.code is a numeric error code console.log('WebSQL Error: '+error.message+' (Code '+error.code+')'); // Handle errors here var we_think_this_error_is_fatal = true; if (we_think_this_error_is_fatal) return true; return false; } // ---------------------------------------------------------------- // A Default Success Handler // This doesn't do anything except log a success message // ---------------------------------------------------------------- this.defaultSuccessHandler = function(transaction, results) { console.log("WebSQL Success. Default success handler. No action taken."); } }

    Read the article

  • Passing a comparator syntax help in Java

    - by Crystal
    I've tried this a couple ways, the first is have a class that implements comparator at the bottom of the following code. When I try to pass the comparat in sortListByLastName, I get a constructor not found error and I am not sure why import java.util.*; public class OrganizeThis implements WhoDoneIt { /** Add a person to the organizer @param p A person object */ public void add(Person p) { staff.put(p.getEmail(), p); //System.out.println("Person " + p + "added"); } /** * Remove a Person from the organizer. * * @param email The email of the person to be removed. */ public void remove(String email) { staff.remove(email); } /** * Remove all contacts from the organizer. * */ public void empty() { staff.clear(); } /** * Find the person stored in the organizer with the email address. * Note, each person will have a unique email address. * * @param email The person email address you are looking for. * */ public Person findByEmail(String email) { Person aPerson = staff.get(email); return aPerson; } /** * Find all persons stored in the organizer with the same last name. * Note, there can be multiple persons with the same last name. * * @param lastName The last name of the persons your are looking for. * */ public Person[] find(String lastName) { ArrayList<Person> names = new ArrayList<Person>(); for (Person s : staff.values()) { if (s.getLastName() == lastName) { names.add(s); } } // Convert ArrayList back to Array Person nameArray[] = new Person[names.size()]; names.toArray(nameArray); return nameArray; } /** * Return all the contact from the orgnizer in * an array sorted by last name. * * @return An array of Person objects. * */ public Person[] getSortedListByLastName() { PersonLastNameComparator comp = new PersonLastNameComparator(); Map<String, Person> sorted = new TreeMap<String, Person>(comp); ArrayList<Person> sortedArrayList = new ArrayList<Person>(); for (Person s: sorted.values()) { sortedArrayList.add(s); } Person sortedArray[] = new Person[sortedArrayList.size()]; sortedArrayList.toArray(sortedArray); return sortedArray; } private Map<String, Person> staff = new HashMap<String, Person>(); public static void main(String[] args) { OrganizeThis testObj = new OrganizeThis(); Person person1 = new Person("J", "W", "111-222-3333", "[email protected]"); Person person2 = new Person("K", "W", "345-678-9999", "[email protected]"); Person person3 = new Person("Phoebe", "Wang", "322-111-3333", "[email protected]"); Person person4 = new Person("Nermal", "Johnson", "322-342-5555", "[email protected]"); Person person5 = new Person("Apple", "Banana", "123-456-1111", "[email protected]"); testObj.add(person1); testObj.add(person2); testObj.add(person3); testObj.add(person4); testObj.add(person5); System.out.println(testObj.findByEmail("[email protected]")); System.out.println("------------" + '\n'); Person a[] = testObj.find("W"); for (Person p : a) System.out.println(p); System.out.println("------------" + '\n'); a = testObj.find("W"); for (Person p : a) System.out.println(p); System.out.println("SORTED" + '\n'); a = testObj.getSortedListByLastName(); for (Person b : a) { System.out.println(b); } System.out.println(testObj.getAuthor()); } } class PersonLastNameComparator implements Comparator<Person> { public int compare(Person a, Person b) { return a.getLastName().compareTo(b.getLastName()); } } And then when I tried doing it by creating an anonymous inner class, I also get a constructor TreeMap cannot find symbol error. Any thoughts? inner class method: public Person[] getSortedListByLastName() { //PersonLastNameComparator comp = new PersonLastNameComparator(); Map<String, Person> sorted = new TreeMap<String, Person>(new Comparator<Person>() { public int compare(Person a, Person b) { return a.getLastName().compareTo(b.getLastName()); } }); ArrayList<Person> sortedArrayList = new ArrayList<Person>(); for (Person s: sorted.values()) { sortedArrayList.add(s); } Person sortedArray[] = new Person[sortedArrayList.size()]; sortedArrayList.toArray(sortedArray); return sortedArray; }

    Read the article

  • Why are my Opteron cores running at only 75% capacity each? (25% CPU idle)

    - by Tim Cooper
    We've just taken delivery of a powerful 32-core AMD Opteron server with 128Gb. We have 2 x 6272 CPU's with 16 cores each. We are running a big long-running java task on 30 threads. We have the NUMA optimisations for Linux and java turned on. Our Java threads are mainly using objects that are private to that thread, sometimes reading memory that other threads will be reading, and very very occasionally writing or locking shared objects. We can't explain why the CPU cores are 25% idle. Below is a dump of "top": top - 23:06:38 up 1 day, 23 min, 3 users, load average: 10.84, 10.27, 9.62 Tasks: 676 total, 1 running, 675 sleeping, 0 stopped, 0 zombie Cpu(s): 64.5%us, 1.3%sy, 0.0%ni, 32.9%id, 1.3%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 132138168k total, 131652664k used, 485504k free, 92340k buffers Swap: 5701624k total, 230252k used, 5471372k free, 13444344k cached ... top - 22:37:39 up 23:54, 3 users, load average: 7.83, 8.70, 9.27 Tasks: 678 total, 1 running, 677 sleeping, 0 stopped, 0 zombie Cpu0 : 75.8%us, 2.0%sy, 0.0%ni, 22.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 77.2%us, 1.3%sy, 0.0%ni, 21.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu2 : 77.3%us, 1.0%sy, 0.0%ni, 21.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 77.8%us, 1.0%sy, 0.0%ni, 21.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 76.9%us, 2.0%sy, 0.0%ni, 21.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 76.3%us, 2.0%sy, 0.0%ni, 21.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 12.6%us, 3.0%sy, 0.0%ni, 84.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 8.6%us, 2.0%sy, 0.0%ni, 89.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu8 : 77.0%us, 2.0%sy, 0.0%ni, 21.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu9 : 77.0%us, 2.0%sy, 0.0%ni, 21.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu10 : 77.6%us, 1.7%sy, 0.0%ni, 20.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 75.7%us, 2.0%sy, 0.0%ni, 21.4%id, 1.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 76.6%us, 2.3%sy, 0.0%ni, 21.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 76.6%us, 2.3%sy, 0.0%ni, 21.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 76.2%us, 2.6%sy, 0.0%ni, 15.9%id, 5.3%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 76.6%us, 2.0%sy, 0.0%ni, 21.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu16 : 73.6%us, 2.6%sy, 0.0%ni, 23.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu17 : 74.5%us, 2.3%sy, 0.0%ni, 23.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu18 : 73.9%us, 2.3%sy, 0.0%ni, 23.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu19 : 72.9%us, 2.6%sy, 0.0%ni, 24.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu20 : 72.8%us, 2.6%sy, 0.0%ni, 24.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu21 : 72.7%us, 2.3%sy, 0.0%ni, 25.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu22 : 72.5%us, 2.6%sy, 0.0%ni, 24.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu23 : 73.0%us, 2.3%sy, 0.0%ni, 24.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu24 : 74.7%us, 2.7%sy, 0.0%ni, 22.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu25 : 74.5%us, 2.6%sy, 0.0%ni, 22.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu26 : 73.7%us, 2.0%sy, 0.0%ni, 24.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu27 : 74.1%us, 2.3%sy, 0.0%ni, 23.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu28 : 74.1%us, 2.3%sy, 0.0%ni, 23.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu29 : 74.0%us, 2.0%sy, 0.0%ni, 24.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu30 : 73.2%us, 2.3%sy, 0.0%ni, 24.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu31 : 73.1%us, 2.0%sy, 0.0%ni, 24.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 132138168k total, 131711704k used, 426464k free, 88336k buffers Swap: 5701624k total, 229572k used, 5472052k free, 13745596k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13865 root 20 0 122g 112g 3.1g S 2334.3 89.6 20726:49 java 27139 jayen 20 0 15428 1728 952 S 2.6 0.0 0:04.21 top 27161 sysadmin 20 0 15428 1712 940 R 1.0 0.0 0:00.28 top 33 root 20 0 0 0 0 S 0.3 0.0 0:06.24 ksoftirqd/7 131 root 20 0 0 0 0 S 0.3 0.0 0:09.52 events/0 1858 root 20 0 0 0 0 S 0.3 0.0 1:35.14 kondemand/0 A dump of the java stack confirms that none of the threads are anywhere near the few places where locks are used, nor are they anywhere near any disk or network i/o. I had trouble finding a clear explanation of what 'top' means by "idle" versus "wait", but I get the impression that "idle" means "no more threads that need to be run" but this doesn't make sense in our case. We're using a "Executors.newFixedThreadPool(30)". There are a large number of tasks pending and each task lasts for 10 seconds or so. I suspect that the explanation requires a good understanding of NUMA. Is the "idle" state what you see when a CPU is waiting for a non-local access? If not, then what is the explanation?

    Read the article

  • mvc3 datatabels and ajax-beginform

    - by MIkCode
    im trying to send and ajax request and returning the result into a new table i debugged the req and i can confirm that evry thing is good except the VIEW the end result is an empty table instead of one row one more weird thing is if i page source i can see all the table result(more than the one that suppose to) this is the view: @model Fnx.Esb.ServiceMonitor.ViewModel.MainModels @{ ViewBag.Title = "MainSearch"; } @Html.EditorForModel() @{ AjaxOptions ajaxOpts = new AjaxOptions { UpdateTargetId = "MainTable", InsertionMode = InsertionMode.Replace, Url = Url.Action("queryData", "MainSearch"), }; } @using (Ajax.BeginForm(ajaxOpts)) { <div class="container"> <form action="#" method="post"> <div id="mainSearch"> @Html.EditorFor(x => x.MainSearchModel) </div> <br /> <br /> <br /> <br /> <div id="advancedSearch"> <div class="accordion" id="accordion2"> <div class="accordion-group"> <div class="accordion-heading"> <a class="accordion-toggle" data-toggle="collapse" data-parent="#accordion2" href="#collapseOne"> Advanced Search </a> </div> <div id="collapseOne" class="accordion-body collapse in"> <div class="accordion-inner"> @Html.EditorFor(x => x.AdvanceSearchContainerModel) </div> </div> </div> </div> </div> <br /> <br /> <button type="submit" class="btn"> <i class="icon-search"></i> Search </button> <button type="reset" class="btn"> <i class="icon-trash"></i> clear </button> </form> <br /> <br /> <br /> <br /> <br /> <br /> <table id="MainTable" cellpadding="0" cellspacing="0" border="0" class="table table-striped table-bordered"> <thead> <tr> <th> serviceDuration </th> <th> status </th> <th> ESBLatency </th> <th> serviceName </th> <th> serviceId </th> <th> startTime </th> <th> endTime </th> <th> instanceID </th> </tr> </thead> <tbody> @foreach (var item in Model.MainTableModel) { <tr> <td> @Html.DisplayFor(modelItem => item.serviceDuration) </td> <td> @Html.DisplayFor(modelItem => item.status) </td> <td> @Html.DisplayFor(modelItem => item.ESBLatency) </td> <td> @Html.DisplayFor(modelItem => item.serviceName) </td> <td> @Html.DisplayFor(modelItem => item.serviceId) </td> <td> @Html.DisplayFor(modelItem => item.startTime) </td> <td> @Html.DisplayFor(modelItem => item.endTime) </td> <td> @Html.DisplayFor(modelItem => item.instanceID) </td> </tr> } </tbody> </table> </div> } the datatables: javascript options $('#MainTable').dataTable({ "sDom": "<'row'<'span6'l><'span6'f>r>t<'row'<'span6'i><'span6'p>>", "bDestroy": true }); thanks miki

    Read the article

  • How do I prove I should put a table of values in source code instead of a database table?

    - by FastAl
    <tldr>looking for a reference to a book or other undeniably authoritative source that gives reasons when you should choose a database vs. when you should choose other storage methods. I have provided an un-authoritative list of reasons about 2/3 of the way down this post.</tldr> I have a situation at my company where a database is being used where it would be better to use another solution (in this case, an auto-generated piece of source code that contains a static lookup table, searched by binary sort). Normally, a database would be an OK solution even though the problem does not require a database, e.g, none of the elements of ACID are needed, as it is read-only data, updated about every 3-5 years (also requiring other sourcecode changes), and fits in memory, and can be keyed into via binary search (a tad faster than db, but speed is not an issue). The problem is that this code runs on our enterprise server, but is shared with several PC platforms (some disconnected, some use a central DB, etc.), and parts of it are managed by multiple programming units, parts by the DBAs, parts even by mathematicians in another department, etc. These hit their own platform’s version of their databases (containing their own copy of the static data). What happens is that every implementation, every little change, something different goes wrong. There are many other issues as well. I can’t even use a flatfile, because one mode of running on our enterprise server does not have permission to read files (only databases, and of course, its own literal storage, e.g., in-source table). Of course, other parts of the system use databases in proper, less obscure manners; there is no problem with those parts. So why don’t we just change it? I don’t have administrative ability to force a change. But I’m affected because sometimes I have to help fix the problems, but mostly because it causes outages and tons of extra IT time by other programmers and d*mmit that makes me mad! The reason neither management, nor the designers of the system, can see the problem is that they propose a solution that won’t work: increase communication; implement more safeguards and standards; etc. But every time, in a different part of the already-pared-down but still multi-step processes, a few different diligent, hard-working, top performing IT personnel make a unique subtle error that causes it to fail, sometimes after the last round of testing! And in general these are not single-person failures, but understandable miscommunications. And communication at our company is actually better than most. People just don't think that's the case because they haven't dug into the matter. However, I have it on very good word from somebody with extensive formal study of sociology and psychology that the relatively small amount of less-than-proper database usage in this gigantic cross-platform multi-source, multi-language project is bureaucratically un-maintainable. Impossible. No chance. At least with Human Beings in the loop, and it can’t be automated. In addition, the management and developers who could change this, though intelligent and capable, don’t understand the rigidity of this ‘how humans are’ issue, and are not convincible on the matter. The reason putting the static data in sourcecode will solve the problem is, although the solution is less sexy than a database, it would function with no technical drawbacks; and since the sharing of sourcecode already works very well, you basically erase any database-related effort from this section of the project, along with all the drawbacks of it that are causing problems. OK, that’s the background, for the curious. I won’t be able to convince management that this is an unfixable sociological problem, and that the real solution is coding around these limits of human nature, just as you would code around a bug in a 3rd party component that you can’t change. So what I have to do is exploit the unsuitableness of the database solution, and not do it using logic, but rather authority. I am aware of many reasons, and posts on this site giving reasons for one over the other; I’m not looking for lists of reasons like these (although you can add a comment if I've miss a doozy): WHY USE A DATABASE? instead of flatfile/other DB vs. file: if you need... Random Read / Transparent search optimization Advanced / varied / customizable Searching and sorting capabilities Transaction/rollback Locks, semaphores Concurrency control / Shared users Security 1-many/m-m is easier Easy modification Scalability Load Balancing Random updates / inserts / deletes Advanced query Administrative control of design, etc. SQL / learning curve Debugging / Logging Centralized / Live Backup capabilities Cached queries / dvlp & cache execution plans Interleaved update/read Referential integrity, avoid redundant/missing/corrupt/out-of-sync data Reporting (from on olap or oltp db) / turnkey generation tools [Disadvantages:] Important to get right the first time - professional design - but only b/c it's meant to last s/w & h/w cost Usu. over a network, speed issue (best vs. best design vs. local=even then a separate process req's marshalling/netwk layers/inter-p comm) indicies and query processing can stand in the way of simple processing (vs. flatfile) WHY USE FLATFILE: If you only need... Sequential Row processing only Limited usage append only (no reading, no master key/update) Only Update the record you're reading (fixed length recs only) Too big to fit into memory If Local disk / read-ahead network connection Portability / small system Email / cut & Paste / store as document by novice - simple format Low design learning curve but high cost later WHY USE IN-MEMORY/TABLE (tables, arrays, etc.): if you need... Processing a single db/ff record that was imported Known size of data Static data if hardcoding the table Narrow, unchanging use (e.g., one program or proc) -includes a class that will be shared, but encapsulates its data manipulation Extreme speed needed / high transaction frequency Random access - but search is dependent on implementation Following are some other posts about the topic: http://stackoverflow.com/questions/1499239/database-vs-flat-text-file-what-are-some-technical-reasons-for-choosing-one-over http://stackoverflow.com/questions/332825/are-flat-file-databases-any-good http://stackoverflow.com/questions/2356851/database-vs-flat-files http://stackoverflow.com/questions/514455/databases-vs-plain-text/514530 What I’d like to know is if anybody could recommend a hard, authoritative source containing these reasons. I’m looking for a paper book I can buy, or a reputable website with whitepapers about the issue (e.g., Microsoft, IBM), not counting the user-generated content on those sites. This will have a greater change to elicit a change that I’m looking for: less wasted programmer time, and more reliable programs. Thanks very much for your help. You win a prize for reading such a large post!

    Read the article

  • class on td is causing tr not to respond

    - by Catfish
    I have this script and the rows that have td class "odd" will not toggle the blue color that the rows without the class "odd" do. anybody know why? //Used to make a row turn blue if available $('tr:not(theadtr)').toggle(function() { $(this).addClass("hltclick"); }, function() { $(this).removeClass("hltclick"); }); and this table <table> <thead> <tr class="border"> <td>Start Time</td> <td>End Time</td> </tr> </thead> <tbody> <tr class="border"> <td class="odd"><a href="#">7:00am</a></td> <td class="odd"><a href="#">8:00am</a></td> </tr> <tr class="border"> <td><a href="#">8:00am</a></td> <td><a href="#">9:00am</a></td> </tr> <tr class="border"> <td class="odd"><a href="#">9:00am</a></td> <td class="odd"><a href="#">10:00am</a></td> </tr> <tr class="border"> <td><a href="#">10:00am</a></td> <td><a href="#">11:00am</a></td> </tr> <tr class="border"> <td class="odd"><a href="#">11:00am</a></td> <td class="odd"><a href="#">12:00pm</a></td> </tr> <tr class="border"> <td><a href="#">1:00pm</a></td> <td><a href="#">2:00pm</a></td> </tr> <tr class="border"> <td class="odd"><a href="#">2:00pm</a></td> <td class="odd"><a href="#">3:00pm</a></td> </tr> <tr class="border"> <td><a href="#">3:00pm</a></td> <td><a href="#">4:00pm</a></td> </tr> <tr class="border"> <td class="odd"><a href="#">4:00pm</a></td> <td class="odd"><a href="#">5:00pm</a></td> </tr> </tbody> </table> and this css #calendar { -moz-border-radius-bottomleft:6px; -moz-border-radius-bottomright:6px; padding:15px; clear:both; padding:15px; } body { color:#222222; font-family:sans-serif; font-size:12px; } table { border:1px solid white; border-collapse:collapse; margin:0 0 30px; width:100%; } .border { border:1px solid #333134; } thead tr { background:none repeat scroll 0 0 #B7EBFF; color:#333134; font-size:24px; font-weight:bold; } tr { background:none repeat scroll 0 0 #616062; font-size:16px; } thead td { font-family:"Century Gothic",Arial; padding:5px 0 20px 5px; } tr.border thead tr { color:#333134; font-size:24px; font-weight:bold; } tr { font-size:16px; }

    Read the article

  • ASP.NET application partially reading external configuration

    - by Trent
    I have an ASP.NET web app and am attempting to reference an external config (using enterprise application blocks configuration) for some of the configuration but it is not entirely working. I previously had all of the configuration info in the web.config (and it was working), but we are wanting to share some of this configuration information between multiple apps. When I put configurationSource tag in the web.config, and read the configuration through the WebConfigurationManager object, it loads some of the external config info (Logging) but not the connectionStrings and not the custom section I created. So its reading it (logging is working), but some dots aren't being connected and my connection strings aren't coming through. Again, it worked when it was all in the web.config. Any idea what needs to change to be able to reference an external configuration source and have it all come through? [Code that accesses web.config] Configuration webConfig = System.Web.Configuration.WebConfigurationManager.OpenWebConfiguration("~"); ConnectionStringSettingsCollection connectionStrings = System.Web.Configuration.WebConfigurationManager.ConnectionStrings; [web.config] <configuration> <configSections> <section name="enterpriseLibrary.ConfigurationSource" type="Microsoft.Practices.EnterpriseLibrary.Common.Configuration.ConfigurationSourceSection, Microsoft.Practices.EnterpriseLibrary.Common, Version=4.1.0.0, Culture=neutral, PublicKeyToken=74025d8738dfe4ce" /> <sectionGroup name="system.web.extensions" type="System.Web.Configuration.SystemWebExtensionsSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <sectionGroup name="scripting" type="System.Web.Configuration.ScriptingSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="scriptResourceHandler" type="System.Web.Configuration.ScriptingScriptResourceHandlerSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <sectionGroup name="webServices" type="System.Web.Configuration.ScriptingWebServicesSectionGroup, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"> <section name="jsonSerialization" type="System.Web.Configuration.ScriptingJsonSerializationSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="Everywhere" /> <section name="profileService" type="System.Web.Configuration.ScriptingProfileServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="authenticationService" type="System.Web.Configuration.ScriptingAuthenticationServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> <section name="roleService" type="System.Web.Configuration.ScriptingRoleServiceSection, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" requirePermission="false" allowDefinition="MachineToApplication" /> </sectionGroup> </sectionGroup> </sectionGroup> </configSections> <enterpriseLibrary.ConfigurationSource selectedSource="File Configuration Source"> <sources> <add name="File Configuration Source" type="Microsoft.Practices.EnterpriseLibrary.Common.Configuration.FileConfigurationSource, Microsoft.Practices.EnterpriseLibrary.Common, Version=4.1.0.0, Culture=neutral, PublicKeyToken=74025d8738dfe4ce" filePath="C:\MSEAB\MSEAB.config" /> </sources> </enterpriseLibrary.ConfigurationSource> ... ... </configuration> [external MSEAB.config] <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=74025d8738dfe4ce" /> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.1.0.0, Culture=neutral, PublicKeyToken=74025d8738dfe4ce" /> <sectionGroup name="customSectionGroup"> <section name="customSection" type="app.customSection" allowLocation="true" allowDefinition="Everywhere" /> </sectionGroup> </configSections> <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="true"> ... </loggingConfiguration> <connectionStrings> <clear /> <add name="DB.DEV" connectionString="User ID=user;Password=pwd;Data Source=DV408;" providerName="Oracle.DataAccess.Client"/> <add name="DB.TEST" connectionString="User ID=user;Password=pwd;Data Source=TS408;" providerName="Oracle.DataAccess.Client"/> ... </connectionStrings> <customSectionGroup> <customSection notificationemail="[email protected]" dirPath="C:\Dir" initialrowlimit="500" maxrowlimit="1500" adminadgroup="_admins"> </customSection> </customSectionGroup> </configuration>

    Read the article

  • C# Reading and Writing a Char[] to and from a Byte[] - Updated with Solution

    - by Simon G
    Hi, I have a byte array of around 10,000 bytes which is basically a blob from delphi that contains char, string, double and arrays of various types. This need to be read in and updated via C#. I've created a very basic reader that gets the byte array from the db and converts the bytes to the relevant object type when accessing the property which works fine. My problem is when I try to write to a specific char[] item, it doesn't seem to update the byte array. I've created the following extensions for reading and writing: public static class CharExtension { public static byte ToByte( this char c ) { return Convert.ToByte( c ); } public static byte ToByte( this char c, int position, byte[] blob ) { byte b = c.ToByte(); blob[position] = b; return b; } } public static class CharArrayExtension { public static byte[] ToByteArray( this char[] c ) { byte[] b = new byte[c.Length]; for ( int i = 1; i < c.Length; i++ ) { b[i] = c[i].ToByte(); } return b; } public static byte[] ToByteArray( this char[] c, int positon, int length, byte[] blob ) { byte[] b = c.ToByteArray(); Array.Copy( b, 0, blob, positon, length ); return b; } } public static class ByteExtension { public static char ToChar( this byte[] b, int position ) { return Convert.ToChar( b[position] ); } } public static class ByteArrayExtension { public static char[] ToCharArray( this byte[] b, int position, int length ) { char[] c = new char[length]; for ( int i = 0; i < length; i++ ) { c[i] = b.ToChar( position ); position += 1; } return c; } } to read and write chars and char arrays my code looks like: Byte[] _Blob; // set from a db field public char ubin { get { return _tariffBlob.ToChar( 14 ); } set { value.ToByte( 14, _Blob ); } } public char[] usercaplas { get { return _tariffBlob.ToCharArray( 2035, 10 ); } set { value.ToByteArray( 2035, 10, _Blob ); } } So to write to the objects I can do: ubin = 'C'; // this will update the byte[] usercaplas = new char[10] { 'A', 'B', etc. }; // this will update the byte[] usercaplas[3] = 'C'; // this does not update the byte[] I know the reason is that the setter property is not being called but I want to know is there a way around this using code similar to what I already have? I know a possible solution is to use a private variable called _usercaplas that I set and update as needed however as the byte array is nearly 10,000 bytes in length the class is already long and I would like a simpler approach as to reduce the overall code length and complexity. Thank Solution Here's my solution should anyone want it. If you have a better way of doing then let me know please. First I created a new class for the array: public class CharArrayList : ArrayList { char[] arr; private byte[] blob; private int length = 0; private int position = 0; public CharArrayList( byte[] blob, int position, int length ) { this.blob = blob; this.length = length; this.position = position; PopulateInternalArray(); SetArray(); } private void PopulateInternalArray() { arr = blob.ToCharArray( position, length ); } private void SetArray() { foreach ( char c in arr ) { this.Add( c ); } } private void UpdateInternalArray() { this.Clear(); SetArray(); } public char this[int i] { get { return arr[i]; } set { arr[i] = value; UpdateInternalArray(); } } } Then I created a couple of extension methods to help with converting to a byte[] public static byte[] ToByteArray( this CharArrayList c ) { byte[] b = new byte[c.Count]; for ( int i = 0; i < c.Count; i++ ) { b[i] = Convert.ToChar( c[i] ).ToByte(); } return b; } public static byte[] ToByteArray( this CharArrayList c, byte[] blob, int position, int length ) { byte[] b = c.ToByteArray(); Array.Copy( b, 0, blob, position, length ); return b; } So to read and write to the object: private CharArrayList _usercaplass; public CharArrayList usercaplas { get { if ( _usercaplass == null ) _usercaplass = new CharArrayList( _tariffBlob, 2035, 100 ); return _usercaplass; } set { _usercaplass = value; _usercaplass.ToByteArray( _tariffBlob, 2035, 100 ); } } As mentioned before its not an ideal solutions as I have to have private variables and extra code in the setter but I couldnt see a way around it.

    Read the article

  • F# - Facebook Hacker Cup - Double Squares

    - by Jacob
    I'm working on strengthening my F#-fu and decided to tackle the Facebook Hacker Cup Double Squares problem. I'm having some problems with the run-time and was wondering if anyone could help me figure out why it is so much slower than my C# equivalent. There's a good description from another post; Source: Facebook Hacker Cup Qualification Round 2011 A double-square number is an integer X which can be expressed as the sum of two perfect squares. For example, 10 is a double-square because 10 = 3^2 + 1^2. Given X, how can we determine the number of ways in which it can be written as the sum of two squares? For example, 10 can only be written as 3^2 + 1^2 (we don't count 1^2 + 3^2 as being different). On the other hand, 25 can be written as 5^2 + 0^2 or as 4^2 + 3^2. You need to solve this problem for 0 = X = 2,147,483,647. Examples: 10 = 1 25 = 2 3 = 0 0 = 1 1 = 1 My basic strategy (which I'm open to critique on) is to; Create a dictionary (for memoize) of the input numbers initialzed to 0 Get the largest number (LN) and pass it to count/memo function Get the LN square root as int Calculate squares for all numbers 0 to LN and store in dict Sum squares for non repeat combinations of numbers from 0 to LN If sum is in memo dict, add 1 to memo Finally, output the counts of the original numbers. Here is the F# code (See code changes at bottom) I've written that I believe corresponds to this strategy (Runtime: ~8:10); open System open System.Collections.Generic open System.IO /// Get a sequence of values let rec range min max = seq { for num in [min .. max] do yield num } /// Get a sequence starting from 0 and going to max let rec zeroRange max = range 0 max /// Find the maximum number in a list with a starting accumulator (acc) let rec maxNum acc = function | [] -> acc | p::tail when p > acc -> maxNum p tail | p::tail -> maxNum acc tail /// A helper for finding max that sets the accumulator to 0 let rec findMax nums = maxNum 0 nums /// Build a collection of combinations; ie [1,2,3] = (1,1), (1,2), (1,3), (2,2), (2,3), (3,3) let rec combos range = seq { let count = ref 0 for inner in range do for outer in Seq.skip !count range do yield (inner, outer) count := !count + 1 } let rec squares nums = let dict = new Dictionary<int, int>() for s in nums do dict.[s] <- (s * s) dict /// Counts the number of possible double squares for a given number and keeps track of other counts that are provided in the memo dict. let rec countDoubleSquares (num: int) (memo: Dictionary<int, int>) = // The highest relevent square is the square root because it squared plus 0 squared is the top most possibility let maxSquare = System.Math.Sqrt((float)num) // Our relevant squares are 0 to the highest possible square; note the cast to int which shouldn't hurt. let relSquares = range 0 ((int)maxSquare) // calculate the squares up front; let calcSquares = squares relSquares // Build up our square combinations; ie [1,2,3] = (1,1), (1,2), (1,3), (2,2), (2,3), (3,3) for (sq1, sq2) in combos relSquares do let v = calcSquares.[sq1] + calcSquares.[sq2] // Memoize our relevant results if memo.ContainsKey(v) then memo.[v] <- memo.[v] + 1 // return our count for the num passed in memo.[num] // Read our numbers from file. //let lines = File.ReadAllLines("test2.txt") //let nums = [ for line in Seq.skip 1 lines -> Int32.Parse(line) ] // Optionally, read them from straight array let nums = [1740798996; 1257431873; 2147483643; 602519112; 858320077; 1048039120; 415485223; 874566596; 1022907856; 65; 421330820; 1041493518; 5; 1328649093; 1941554117; 4225; 2082925; 0; 1; 3] // Initialize our memoize dictionary let memo = new Dictionary<int, int>() for num in nums do memo.[num] <- 0 // Get the largest number in our set, all other numbers will be memoized along the way let maxN = findMax nums // Do the memoize let maxCount = countDoubleSquares maxN memo // Output our results. for num in nums do printfn "%i" memo.[num] // Have a little pause for when we debug let line = Console.Read() And here is my version in C# (Runtime: ~1:40: using System; using System.Collections.Generic; using System.Diagnostics; using System.IO; using System.Linq; using System.Text; namespace FBHack_DoubleSquares { public class TestInput { public int NumCases { get; set; } public List<int> Nums { get; set; } public TestInput() { Nums = new List<int>(); } public int MaxNum() { return Nums.Max(); } } class Program { static void Main(string[] args) { // Read input from file. //TestInput input = ReadTestInput("live.txt"); // As example, load straight. TestInput input = new TestInput { NumCases = 20, Nums = new List<int> { 1740798996, 1257431873, 2147483643, 602519112, 858320077, 1048039120, 415485223, 874566596, 1022907856, 65, 421330820, 1041493518, 5, 1328649093, 1941554117, 4225, 2082925, 0, 1, 3, } }; var maxNum = input.MaxNum(); Dictionary<int, int> memo = new Dictionary<int, int>(); foreach (var num in input.Nums) { if (!memo.ContainsKey(num)) memo.Add(num, 0); } DoMemoize(maxNum, memo); StringBuilder sb = new StringBuilder(); foreach (var num in input.Nums) { //Console.WriteLine(memo[num]); sb.AppendLine(memo[num].ToString()); } Console.Write(sb.ToString()); var blah = Console.Read(); //File.WriteAllText("out.txt", sb.ToString()); } private static int DoMemoize(int num, Dictionary<int, int> memo) { var highSquare = (int)Math.Floor(Math.Sqrt(num)); var squares = CreateSquareLookup(highSquare); var relSquares = squares.Keys.ToList(); Debug.WriteLine("Starting - " + num.ToString()); Debug.WriteLine("RelSquares.Count = {0}", relSquares.Count); int sum = 0; var index = 0; foreach (var square in relSquares) { foreach (var inner in relSquares.Skip(index)) { sum = squares[square] + squares[inner]; if (memo.ContainsKey(sum)) memo[sum]++; } index++; } if (memo.ContainsKey(num)) return memo[num]; return 0; } private static TestInput ReadTestInput(string fileName) { var lines = File.ReadAllLines(fileName); var input = new TestInput(); input.NumCases = int.Parse(lines[0]); foreach (var lin in lines.Skip(1)) { input.Nums.Add(int.Parse(lin)); } return input; } public static Dictionary<int, int> CreateSquareLookup(int maxNum) { var dict = new Dictionary<int, int>(); int square; foreach (var num in Enumerable.Range(0, maxNum)) { square = num * num; dict[num] = square; } return dict; } } } Thanks for taking a look. UPDATE Changing the combos function slightly will result in a pretty big performance boost (from 8 min to 3:45): /// Old and Busted... let rec combosOld range = seq { let rangeCache = Seq.cache range let count = ref 0 for inner in rangeCache do for outer in Seq.skip !count rangeCache do yield (inner, outer) count := !count + 1 } /// The New Hotness... let rec combos maxNum = seq { for i in 0..maxNum do for j in i..maxNum do yield i,j }

    Read the article

  • Pointers to Derived Class Objects Losing vfptr

    - by duckworthd
    To begin, I am trying to write a run-of-the-mill, simple Ray Tracer. In my Ray Tracer, I have multiple types of geometries in the world, all derived from a base class called "SceneObject". I've included the header for it here. /** Interface for all objects that will appear in a scene */ class SceneObject { public: mat4 M, M_inv; Color c; SceneObject(); ~SceneObject(); /** The transformation matrix to be applied to all points of this object. Identity leaves the object in world frame. */ void setMatrix(mat4 M); void setMatrix(MatrixStack mStack); void getMatrix(mat4& M); /** The color of the object */ void setColor(Color c); void getColor(Color& c); /** Alter one portion of the color, leaving the rest as they were. */ void setDiffuse(vec3 rgb); void setSpecular(vec3 rgb); void setEmission(vec3 rgb); void setAmbient(vec3 rgb); void setShininess(double s); /** Fills 'inter' with information regarding an intersection between this object and 'ray'. Ray should be in world frame. */ virtual void intersect(Intersection& inter, Ray ray) = 0; /** Returns a copy of this SceneObject */ virtual SceneObject* clone() = 0; /** Print information regarding this SceneObject for debugging */ virtual void print() = 0; }; As you can see, I've included a couple virtual functions to be implemented elsewhere. In this case, I have only two derived class -- Sphere and Triangle, both of which implement the missing member functions. Finally, I have a Parser class, which is full of static methods that do the actual "Ray Tracing" part. Here's a couple snippets for relevant portions void Parser::trace(Camera cam, Scene scene, string outputFile, int maxDepth) { int width = cam.getNumXPixels(); int height = cam.getNumYPixels(); vector<vector<vec3>> colors; colors.clear(); for (int i = 0; i< width; i++) { vector<vec3> ys; for (int j = 0; j<height; j++) { Intersection intrsct; Ray ray; cam.getRay(ray, i, j); vec3 color; printf("Obtaining color for Ray[%d,%d]\n", i,j); getColor(color, scene, ray, maxDepth); ys.push_back(color); } colors.push_back(ys); } printImage(colors, width, height, outputFile); } void Parser::getColor(vec3& color, Scene scene, Ray ray, int numBounces) { Intersection inter; scene.intersect(inter,ray); if(inter.isIntersecting()){ Color c; inter.getColor(c); c.getAmbient(color); } else { color = vec3(0,0,0); } } Right now, I've forgone the true Ray Tracing part and instead simply return the color of the first object hit, if any. As you have no doubt noticed, the only way the computer knows that a ray has intersected an object is through Scene.intersect(), which I also include. void Scene::intersect(Intersection& i, Ray r) { Intersection result; result.setDistance(numeric_limits<double>::infinity()); result.setIsIntersecting(false); double oldDist; result.getDistance(oldDist); /* Cycle through all objects, making result the closest one */ for(int ind=0; ind<objects.size(); ind++){ SceneObject* thisObj = objects[ind]; Intersection betterIntersect; thisObj->intersect(betterIntersect, r); double newDist; betterIntersect.getDistance(newDist); if (newDist < oldDist){ result = betterIntersect; oldDist = newDist; } } i = result; } Alright, now for the problem. I begin by creating a scene and filling it with objects outside of the Parser::trace() method. Now for some odd reason, I cast Ray for i=j=0 and everything works wonderfully. However, by the time the second ray is cast all of the objects stored in my Scene no longer recognize their vfptr's! I stepped through the code with a debugger and found that the information to all the vfptr's are lost somewhere between the end of getColor() and the continuation of the loop. However, if I change the arguments of getColor() to use a Scene& instead of a Scene, then no loss occurs. What crazy voodoo is this?

    Read the article

< Previous Page | 573 574 575 576 577 578 579 580 581 582 583 584  | Next Page >