Search Results

Search found 17009 results on 681 pages for 'screen orientation'.

Page 578/681 | < Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >

• No video signal and server shuts down

  - by Ilya

  I have a brand new server. The motherboard is Intel S2600CP4, two 8-core Intel E5-2600 processors. RAM is 8 DIMM slots of 8 GB each (KVR1600D3D4R11SK4/32GI, I installed them into the blue slots), Power supply is 1050W Corsair. Most of the time the server won't start up - the fans are spinning, but I don't have video signal. And it keeps restarting on its own every 3 mins. But maybe after 30 mins it will eventually load and show something on the screen. I even was able to install ESXi 5.0 (vSphere) on it. It recognizes both CPUs and all of the 64GB of RAM. But even then it worked only for around 5 hours and then restarted on its own. What's the problem? That's a very expensive peace of hardware and I can't afford purchasing a new motherboard/CPU. By the way, on the front panel the "System Status" LED is constantly amber (not blinking), even when the server started successfully. And also in the BIOS I can see lots of "processor 01 unable to apply microcode update 8160" fatal errors. Please help me with issue, I will really appreciate this!

  Read the article

• Video output vanishes and it isn't the video card... suggestions?

  - by Ira Baxter

  I have a high-end dual processor Dell workstation that operated for several years without problem. Recently, the video output has gone flaky, in the sense that after 2-3 days, it loses synch with the monitor (sometimes you can still see a hashed-mess of the what you expect to see on the screen). Poking at the keyboard, and accessing the file system on the machine from over the network, indicates that the machine is running fine and its just the video. A reboot fixes the problem... for another day or two. This in effect makes the machine unusable. So, I replaced the video card with an exact duplicate bought from e-bay. (I checked after the dupe arrived to be sure, yep, same model number). I still get the same behavior. So unless I believe that both video cards are broken the same way, I have to beleive this is a problem with the motherboard/power supply, neither of which I am inclined to replace. The only other possibility I can think of is a Windows update to the graphics driver. How would I check for this? Anybody had a similar problem? Otherwise we're junking what used to be a perfectly good machine. (Another couple of hours of more wasted effort and that's it in terms of economics anyway).

  Read the article

• Explorer.exe keeps crashing during log in

  - by asif

  I have got a weird problem. My windows 7 has two user accounts (both are administrator). I can log in to one account and do all sort of work. But whenever I try to log in to other account, it shows a blank screen and a messagebox pops up with "windows explorer has stopped working". The options available are: Close the program Check online for a solution and close the program The problem signature is as follows: Problem Event Name: InPageError Error Status Code: c000009c Faulting Media Type: 00000003 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 If I press alt+ctrl+del and then select start task manager, it also crashes. I can not run any program using runas command (from good profile) too. The task manager and runas programs all show same problem signature. I read the similar question and followed all the steps, but no luck. Later, I viewed the event log and found that, explorer.exe could not access a file. I checked the location but the file is there. The actual message is: Windows cannot access the file C:\Users\testuser\AppData\Local\Microsoft\Windows\Caches\{AFBF9F1A-8EE8-4C77-AF34-C647E37CA0D9}.1.ver0x0000000000000020.db for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Windows Explorer because of this error. The question is, how can I resolve this issue? Should I just delete the file or replace it with another one to stop explorer.exe from crashing? offtopic: What is the content of this file and why it is necessary?

  Read the article

• How do I restrict the Open/Save dialog in Windows to one folder?

  - by MindModel

  I spend a significant amount of time helping non-techies use their PC's. I realized most of that time is spent trying to explain to them how the Windows folder hierarchy works, where the "open file" dialog is pointing now, and how to find that Word document they saved. All this time, they're telling me they "just want to print the file". They refuse to learn how to read the PC screen, try to memorize a fixed set of steps, and end up calling me back to tell me their files disappeared again. I realize it's not productive to try to restrict where PC apps (e.g. Quicken) store files. But if there was a Windows utility I could turn on or off that would restrict the Open/Save dialogs in Windows apps, my noob user friends and I would save an enormous amount of time. The goal would be to have all files whose locations are chosen by the Save dialog saved to one folder, and have the Open dialog always point to that folder, until the utility is turned off. Does such a Windows utility exist?

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• Write Fedora.iso to USB and boot it from a Macbook

  - by MTilsted

  I have an .iso image of the full Fedora 16 install (Downloaded from http://fedoraproject.org/en/get-fedora-options#formats as "Fedora 16 DVD") and the question now is: How do I write it on a USB stick, so I can install it on my Mac book? I tried using DD as the install guide said, and that gave me a USB stick which can boot from my PC. But it can't boot from the Mac (The Mac start menu don't show it as a boot option). Edit: I downloaded a live install image, and did this (SSD is my USB 4GB thing) /sbin/mkdosfs -F 32 -n usbdisk /dev/dev/sdd1 sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora-16-i686-Live-KDE.iso /dev/sdd1 And this produced an image which can boot on my pc but not on my mac. This seems to indicate that the --efi is not working, because if it really was EFI it would not boot on a normal pc, would it? I then tried this: (Difference being that I write the image directory to /dev/sdd instead of /dev/sdd1) but this still will not boot on the Mac (it newer shows up at the startup screen on the Mac). sudo livecd-iso-to-disk --format --reset-mbr --efi /tmp/download/Fedora- PS: My host Linux is Fedora 13.

  Read the article

• GA 8KNXP Rev1.0: 4 GB installed, only 3.5 GB recognized by BIOS

  - by hurikhan77

  I've installed 2x 1 GB and 4x 512 MB memory into my GA-8KNXP system which would sum up to 4 GB. The specification from the manual says: Maximum memory support: 4 GB. If all six slots are utilized, slot 5+6 may only equipped with single-sided RAM modules. And so I did. Anyway: The BIOS counts up to 3.5 GB and finishes there. Also my Linux system reports only 3.5 GB of memory although 4 GB memory support is activated in the kernel. So I suppose this is a memory mapping issue or a hardware issue. I've tried removing only on of the 512 MB memory modules leaving 5 modules in place. But that just stopped the system from powering on correctly (screen stays black although fans and leds come to live). Dual Channel was detected and enabled so the system technically found all 6 modules. "dmidecode" in Linux reports only memory in slots 1 to 4 and ignores slots 5+6, so it only detects 3 GB of memory. It also says the system would support up to 16 GB of memory with 4 GB modules per slot. I think technically the chipset should be able to offer and utilize the complete 4 GB memory range. Any clues what else I could check? Or do I have just to live with 0.5 GB wasted memory?

  Read the article

• How to fix a bootable USB Kubuntu installation when the drive has maxed out?

  - by NoCatharsis

  I used Universal-USB-Installer-v1.5.1 from PenDriveLinux.com with Kubuntu 10.04 so I could set up my 4GB flash drive as a totally independent installation. Unfortunately, there was an OS upgrade available which Kubuntu downloaded and attempted to install. This, along with some other software, apparently maxed out my drive before I realized it. Now when I try to boot from the drive, everything boots as normal to the OS boot screen where I select "Boot from this Kubuntu USB Installation." The startup process initiates, then stalls about halfway through and hangs indefinitely. I'm guessing the drive is trying to use space it doesn't have and completely stops working. I realize that once the OS upgrade is in place, the old files could be deleted for a potential 700MB space gain. However, I just have no way to get into the OS and complete the upgrade. My main OS is Windows 7. Is there a way I can fix this issue from within Windows without formatting the entire drive and reinstalling Kubuntu from scratch?

  Read the article

• Apple / Mac OS X - Is there a Package Manager like Linux

  - by Walter White

  I am a Linux/UNIX user and love the package management that comes with it. For the most part, I like Ubuntu, but just like anything else, it is the minor things that you live with daily that would be nice if they just worked. My main issue is my wacom tablet while it works, every time there is an OS update, I have to rebuild the wacom driver. The other slightly annoying issue is, my ATI video card is not fully supported. When I use the HDMI out, the sound doesn't go through it, and the screen is not entirely used. I would happily get an Apple if it had a similar package management system like Ubuntu, Gentoo, or other Linux distribution. This takes the work out of getting the latest enhancements or fixes. It also takes all the guess work out about what you need to get something to work. I just want to use my computer, not administer it. Aside from Apple applications, if I wanted to install the GIMP on an apple, would it go and fetch ufraw if I wanted support for that and whatever other dependencies GIMP has? If I want Netbeans installed, will it go and get a JDK and maven if I want that? If not, is there something in the works? I know I don't update my applications that frequently, but that is mainly because I'm not aware of the updates. The updates all happen in the background. Walter

  Read the article

• Windows XP only loads in VGA mode, and crashes when raising resolution

  - by Harel

  My kid's computer (Windows XP, SP3) started to (what appears to be) crash on boot. It will only boot in Safe or VGA mode, and if I try to raise the resolution from 640x480 it just reboots itself, and a error appears in the Event Log. When it loads up not in VGA mode, the monitor shuts off just after the windows logo is shown. It seems like windows is actually running but I can't see anything on screen (monitor is off for lack of signal). Nothing was installed recently that I know of, short of the usual windows updates. Thanks, Harel Below is the event log error: Event Type: Error Event Source: System Error Event Category: (102) Event ID: 1003 Date: 15/04/2012 Time: 16:27:11 User: N/A Computer: ----- Description: Error code 1000008e, parameter1 c0000005, parameter2 f745b0bf, parameter3 ede24f98, parameter4 00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 31 30 30 30 30 30 38 1000008 0020: 65 20 20 50 61 72 61 6d e Param 0028: 65 74 65 72 73 20 63 30 eters c0 0030: 30 30 30 30 30 35 2c 20 000005, 0038: 66 37 34 35 62 30 62 66 f745b0bf 0040: 2c 20 65 64 65 32 34 66 , ede24f 0048: 39 38 2c 20 30 30 30 30 98, 0000 0050: 30 30 30 30 0000

  Read the article

• Windows XP Boot Issue - Diagnosing A Hard Drive Failure

  - by duffymo

  My five-year-old HP desktop running Windows XP SP3 wouldn't boot from the hard drive yesterday afternoon. I would see the boot sequence begin, then nothing but a black screen. Fortunately, I had just done an Acronis backup to my external drive in the morning, and I have a bootable USB key. I put the USB key into the drive, powered up the machine, and put the USB key first in line in the boot sequence. Voila! My machine came alive. But now I'm confused as to what the problem is and what to do next. I assumed that my hard drive was toast. But now that the machine is alive I can see files on my C: drive that have changes I made just yesterday. Clearly the drive is not dead. Here are my questions: What could explain my inability to boot from the hard drive? What would a remedy be? What's my best course of action? Should I replace the hard drive with a new one? If I replace the hard drive, do I reinstall the OS and apply the backup I did yesterday? If I decide that re-installing Windows XP makes no sense, how do I get back the Acronis backup that I did yesterday? I don't want to lose that. UPDATE: I just learned one more key fact. I'm having some work done on my house. I neglected to shut my machine down before the contractor came. My wife said he shut down the power to do some work on a circuit and then powered the house back up. I have a surge protector, but is it possible that cycling the power did some damage?

  Read the article

• Cannot set video resolution above 640x480 after installing Windows XP SP2

  - by waanders

  I've installed Windows XP SP2 on a computer (there was not SP at all). Now the display settings are set back to 640x480 and 4 bits colors. And I can't change it, it's the only option in Settings tab of the Display dialog of Windows. The screen look awful now, how can I solve this problem? UPDATE: Seems to be a problem with the video driver (thanks @Karan and @Hennes). I did run Speccy (PC-Wizard freezes the computer) and this is a part of the log file: Summary Operating System Microsoft Windows XP Professional 32-bit SP3 CPU Intel Celeron Willamette 0.18um Technology RAM 512 MB DDR @ 133MHz (2.5-3-3-6) Motherboard COMPAQ 0838h (FC-478) Graphics Standard Monitor (640x480@1Hz) Hard Drives 19.0GB Maxtor 2B020H1 (PATA) Optical Drives No optical disk drives detected Audio No audio card detected ... Graphics Monitor Name Standard Monitor on Current Resolution 640x480 pixels Work Resolution 640x450 pixels State enabled, primary Monitor Width 640 Monitor Height 480 Monitor BPP 4 bits per pixel Monitor Frequency 1 Hz Device \\.\DISPLAY1 OpenGL Version 1.1.0 Vendor Microsoft Corporation Renderer GDI Generic GLU Version 1.2.2.0 Microsoft Corporation Values GL_MAX_LIGHTS 8 GL_MAX_TEXTURE_SIZE 1024 GL_MAX_TEXTURE_STACK_DEPTH 10 GL Extensions GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture GL_EXT_bgra

  Read the article

• Windows 7 taskbar groups to use vertical menus only, not thumbnails?

  - by Justin Grant

  I frequently have 10 or more windows of the same application (e.g. Outlook, Word, IE, etc.) open at one time. Windows 7's new taskbar grouping thumbnail feature shows a preview of open windows (aka thumbnails) when you single-click on the taskbar group for that application. But when I have over 10 windows open (more thumbnails than will fit horizontally on my screen), Windows reverts to a vertical menu. This is disconcerting since I need to train myself to deal with two separate behaviors and can never anticipate what I'm going to see when I click on a taskbar group. Furthermore, I find the thumbnails more difficult to visually scan through (vs. the vertical menu) because only 1-2 words of each window's title are shown. Typically that's not enough text to disambiguate and help me find the right window. I'd like to force Windows 7's taskbar grouping to always show a vertical menu (like in XP) instead of sometimes showing thumbnail previews and sometimes showing a vertical menu. Anyone know how (whether?) this can be done? UPDATE: BTW, I'm running the RTM version (build 7600) of Windows 7. There are apparently other solutions out there which work on earlier builds, but which don't work on the RTM build.

  Read the article

• Hardware issue: computer plays beep sounds at startup, and then turns off

  - by Darkkurama

  Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

  Read the article

• Looking for an application to record audio and video on a linux "embedded" device

  - by Luke404

  I am working with a linux x86 device with limited CPU resources (as a prototype we just use a pentium-m netbook). We'd like to record video from one V4L2 device (we'll probably end up using just USB Video Class devices like all modern webcams) and one audio stream from an ALSA source. The thing will not have screen and keyboard, and obviously no X11 environment. Goals are: do as little work as possible to cope with little cpu resources - for example I'd like to record video in the native MJPEG I get out of the UVC devices encoding audio to MPEG3 Layer-2 (aka mp2) is ok since it let us save a lot of space (compared to raw pcm samples) and does use little cpu power I don't mind loosing some video frames here and there (UVC devices do that) as long as I can get audio and video streams syncronized not require user input to start the thing (a python script takes care of initialization, startup, shutdown, etc...) be able to open the resulting files for postprocessing without too much effort (ie, if mplayer or vlc can play it, it's fine) So far the only app I found that could be started from command line and record V4L2 video + ALSA audio is mencoder but I'm having some difficulties with it. It should be able to do that but I cannot record audio and video together - just one of the two. And if I use two different processes to record to two different files I have no means to get them in sync (audio is more or less always correct, but video framerate will vary over time and it seems to lack timestamps to correctly play it back to the correct time). Long story short, how do you record an unconverted MJPEG stream (from an UVC device) and an audio stream (from an ALSA device, possibly encoding to any standard format) using a command line tool, to a single file (MPEG or any other container), keeping audio and video in sync?

  Read the article

• Recommendations for hosting large videos

  - by Clinton Blackmore

  I recently created and put a 45-minute, 300 MB video file on my website and told a mailing list about it. Checking my site stats, I see that I've used 20% of my "unlimited" bandwidth for the month. As I want to be able to have several videos like this, clearly, I need to consider other options. The appeal to hosting files as my own site (aside from the supposedly unlimited disk space and bandwidth), is to be able to have control over the format, resolution, and quality of the video(s), as well as to ensure that it is clear that I'm the copyright holder (although the videos will be under a creative commons license). I find that for the screencasts I'm making, having a high resolution (say 3/4 of 1024 * 768) really makes seeing what is going on on the screen easier. It is also always a plus to not have the experience marred by advertisements. One more wrench to throw in is that while the videos are non-commercial, they do promote a club, and it seems that that falls afoul of some terms of services (especially for free services; while free is very nice, I will certainly consider putting up some money.) What recommendations do you have for (fairly) long, high-resolution videos? Should I look in depth at sites like YouTube and Vimeo, should I be considering a filesharing site [I have no qualms with someone downloading the entire video first -- I wouldn't want to watch 45 minutes in my browser!], hosting files with Bittorent (ugh -- I think that'd reduce my audience), or should I be looking into other web hosts (and if so, who?)

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• svn post-commit not performing

  - by davin

  ive been sitting on this for about 7 hours, and ive aged close to 7 years... ahhh, server admin does that to me. i have svn wired through apache2 with webdav in the usual manner (basically like http://www.howtoforge.com/setting-up-subversion-with-webdav-post-commit-hook-and-multiple-sites-on-jaunty-jackalope-ubuntu-9.04). ive had endless problems with this (i didnt on my previous ubuntu server install, although this is ubuntu 10.10): this happened, and was fixed like in the post: http://stackoverflow.com/questions/2547400/how-do-you-fix-an-svn-409-conflict-error this looks like my issue, although its not my solution: http://serverfault.com/questions/135494/apache-svn-on-ubuntu-post-commit-hook-fails-silently-pre-commit-hook-permis my commit to svn works (finally). although the post-commit hook which is supposed to svn update the working copy of the repo on the server, doesn't work. the post-commit hook itself executes, and has sudo permissions (as in the setup url above. testing with whoami somelogfile.log or sudo whoami somelogfile.log shows www-data and root, respectively), although it wont perform the svn update (sudo svn update /var/www/gameServer /var/svn/gameServer.log). similar to the serverfault url above, when i perform the exact command it does update the working copy to the latest revision, just not through the post-commit hook. an age old question that is 90% of the time a permissions issue. but in pure frustration i chmod 777 lots of stuff not to mention the fact that www-data is in /etc/sudoer so it shouldnt even need that. im collapsing in front of the screen partly out of frustration and partly out of sleepiness. any direction would be appreciated.

  Read the article

• Can't open cocoa emacs from terminal using open -a

  - by Shane

  I installed emacs on my MacBook Air running Mac OS X 10.6.5 from this site http://emacsformacosx.com/. I believe this is what used to be called cocoa emacs. I dragged it into my Application folder and it works fine when I run it from there. I want to be able to run it from the Terminal. After some googling, I tried open -a /Application/Emacs.app foo.txt (foo.txt was and existing file). I got two emacs windows - one with welcome screen and one with foo.txt loaded. I tried a few applications in the /Applications directory and they did not seem to behave like this. I had installed it using my own account (an admin account) so after doing ls -l on /Application I noticed that the owner and group were different from the other entries in this folder. I recursively changed the owner and group to root and wheel, like the others, but this did not help. The only thing that looks funny now is that there that ls -l show a @ character which has something to do with extended attributes but I don't know how to check these. Any suggestions on what to check next? Is using the open command the only to run the program? Can I simulate what it does using a shell script?

  Read the article

• Can't pin modified shortcuts to the Windows 7 task bar

  - by Coder

  I have a shortcut to a .bat file which I pin to the task bar using a workaround by using another icon and this seems to work. Now I make a copy of that shortcut, point it to a different .bat file, rename it, and I can't pin this one to the task bar. I have to find some other new unused icon to pin, pin it, then modify it manually. The other problem this causes is that windows seems to track which icons were pinned even if they are modified after the fact. As such, if I use media player as my dummy icon, pin it, then alter it's name and shortcut to point to a .bat file, I can't re-pin windows media player and if I select unpin from the windows media player, it unpins my shortcut to my .bat file. I can't believe how ridiculous this is. Is there a way to pin anything I want to the taskbar (ie. .bat file in my case) that does not cause problems like this? Is there an easy way I can copy an existing shortcut and modify it and re-pin it to the taskbar? The reason I want to copy it is because I start a .bat file (in particular git bash) and I set properties on the window like quick edit, increase the screen buffer and set it's position and size manually. I don't want to have to do this to every single icon I want to pin since they will be identical aside from the shortcut url.

  Read the article

• Logmein does not work at home?

  - by Littlet-ENG

  I've been using logmein successfully for may situations and have had very good success. Our company has an Log me in Pro account. I have used this to share my desktop with customers. At work, I have had no problem with my laptop. At home, one program (solid-works) that I need to share with my customers, will not display the active screen. I spent 45 min on the phone with both the software for the cad system and logmein support with not help. I need help in narrowing down what the problem is on my computer. The support guys at Solid-works got another remote software to work, so its not the program. I can get the logmein to work at the office so its not the settings of the logmein pro account. The LMI people say its a setting on my computer.? -internet is fast enough at home -can't narrow down the problem -changed graphical settings and that didn't work. Any Suggestions?

  Read the article

• Is browser based wireless authentication secure?

  - by johnnyb10

  Our wireless network previously used a preshared WPA/WPA2 key for guest access, which allows them access to the Internet. (Our employee access uses 802.1x authentication). We just had a wireless consultant come in to fix various wireless issues we had; one of the things he wound up doing was changing our guest access to HTML-based instead of the preshared key. So now that guest SSID is open (instead of using WPA) and users are presented with a browser-based login screen before they can get on the Internet. My question is: Is this an acceptable method from a security standpoint? I would assume that having an open network is necessarily a bad idea, but the consultant said that the traffic is still using PEAP, so it's secure. I didn't get a chance to question him further on this because we ran late and a bunch of other things came up. Please let me know what you think about the advantages/disadvantages of using HTML-based wireless authentication as opposed to using a preshared WPA key. Thanks...

  Read the article

• How to fix Quicktime video color problems on nVidia chipset and Windows XP?

  - by Matthew Glidden

  My laptop frequently plays video as if in very low-color mode. Though the sound remains clear, it looks terrible, showing only a few shades of red, blue, or yellow. (It's even worse than 8-bit color.) The problem doesn't happen consistently, so I'm looking for troubleshooting advice or known solutions. I use a Dell Latitude D620 laptop with Windows XP, on-board nVidia video chipset, Quicktime, and multiple monitors (laptop screen + VGA-connected LCD). Color problems happen in each application I tried, iTunes, a browser, and the Quicktime standalone player. It doesn't happen right after reboot, so could be from a sleep-wake cycle, or at least being on for an extended period. Google results suggest reinstalling nVidia drivers, which I've done several times with no change. I have found 2 workarounds. Reboot, sacrificing significant time and disrupting work In nVidia control panel, change color to 16-bit, and then back to 32-bit This happens with all video playback, so it's definitely not one corrupt file. I use workaround #2 consistently, but would love a longer-term solution.

  Read the article

• Apache error "child pid XXXX exit signal exceeded file size limit (25)"

  - by Stephen Melrose

  Morning all, Apache on our internal development server stopped working last night. It's running, but all we get is a blank screen, no server errors. Examing the error log shows the following, [Fri Apr 23 09:13:57 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:03 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:03 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) [Fri Apr 23 09:14:06 2010] [notice] child pid XXXX exit signal exceeded file size limit (25) After some Googling, we found that this is due to Apache trying to handle a file greater than it's maximum allowed limit, which by default is 2GB and is usually an error log. I did a search using find . -size +1000000k -ls (find all files greater than 1GB) in our log and web folders, but nothing showed up. I've also restarted Apache and rebooted the server itself serveral times. I've completely wiped the log folder and started a fresh. Nothing is working. Any ideas as to what else might be causing this? Thank you

  Read the article

• Windows 7 task bar stuck in hiding, how to fix?

  - by Rainer Blome

  In Windows 7, I use the "Auto-hide the task bar" feature. Usually, it works fine: As soon as the pointer touches the screen bottom, the task bar pops up. However sometimes, it refuses to rise. Pressing the "Windows" key (or Ctrl-ESC) makes the start menu appear, forcing the task bar from hinding as well. Once I've done this, the task-bar auto-rises again. This is annoying, it interrupts flow. Has anyone else noticed this? How do I avoid this? Searching for "Windows 7 task bar auto-raise" shows that at least one other person experienced this problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-can-i-fix-the-taskbars-auto-hide/8cdf6369-7354-4d29-9249-b7096ed0e28b?msgId=6dac3361-9d0f-4a9e-8642-b91a72826ba4 To answer the question posed by the "helpful" support engineer on the above page, of course I am running some apps when this happens, usually Explorer, Firefox, Eclipse, Cygwin/X, Xterm, Emacs, Notes, VPN client, Firewall. If my memory serves correctly, I have seen this behavior on earlier versions of Windows as well, XP at least. To reproduce this behavior, I tried switching between apps, and bringing apps to open other windows. I am unable to reproduce this behavior so far. So far, it appears to happen out of the blue, sometimes multiple times a day. Looks like a bug to me. The task bar should raise no matter what.

  Read the article

< Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >