Search Results

Search found 2417 results on 97 pages for 'mb'.

Page 58/97 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• How to update BIOS with efi?

  - by gasko peter

  We have a GA-H61M-DS2 rev 2.0 motherboard. It has an "F4" BIOS. We went to the vendors website: http://hu.gigabyte.com/products/page/mb/ga-h61m-ds2rev_20/download/bios and downloaded "F7", the latest BIOS version. We already tried: 1) "Efiflash.exe H61MDS22.F7" command from windows 7/32bit, it said nothing, the command line just flashed for a second.. 2) boot the win7 in "dos" mode (...) but the same thing happened. Q: How can we upgrade the BIOS? There aren't any ways for it?

  Read the article

• misaligned raid partition in Ubuntu 10.04

  - by Linux Jedi

  I attached two identical hard drives to my linux machine. Then using gparted I formated the first 1024 mb at the beginning of each drive as linux swap space. Then I went into system-administration-disk utility. In there I went to file-create-RAID array. I selected the remaining space in each of the two identical hard drives and created a striped raid array. After the array was created, a warning message appeared. It said "The partition is misaligned by 522240 bytes. This may result in very poor performance. Repartitioning is suggested." What do I do now? As far as I can tell, the partitions are identical.

  Read the article

• What's a fast way to copy a lot of files from an internal hard-drive to external (USB) storage?

  - by jonathanconway

  I have a large amount of data - about 500 GB - on the internal hard drive of a desktop PC. This includes music, videos, PDFs... you name it. I want to copy everything to an external USB hard drive (1.5 tb capacity). The desktop PC runs Ubuntu. To being with, I simply plugged in and mounted the hard drive and dragged the top-level folder onto the drive. It's started copying, but it seems to be proceeding very slowly. About 10 minutes later and it's only done about 500 MB. I'm sure this is slower than what I could achieve with less total data. So I'm wondering if there's a quicker way of doing this. Would it be better to copy it in portions of 500MB or so, rather than all at once?

  Read the article

• Linux: Limiting data throughput (pipe) in bytes per second?

  - by sdaau

  Hi all, I was wandering if there is a Linux program that can limit data throughput of a pipe - in actual bytes per second?. From what I gather, applicable for the purposes would be bfr, however, it has been removed from Debian (Removal candidate: bfr) cpipe, however, it seems the lowest resolution it will support is kB/s, meaning that buffer writes can still reach MB/s ([SOLVED] Is there a program to limit terminal pipe speed? - Page 2 - Ubuntu Forums) What I'd want is to be able to specify something like cat example.txt | ratelimit -Bps 100 > /dev/ttyUSB0 ... and actually have a single byte from example.txt sent each 1/100 = 0.01 sec (or 10 ms) to 'output'.. Thanks in advance for any suggestions, Cheers!

  Read the article

• Cloud service to receive up to 30000 emails a minute

  - by David

  I am building a business where I want the infrastructure to be able to handle up to 30000 emails per minute during peak periods. The question is what kinds of services offer this? I expect to download the emails using SMTP or similar. I expect each email to have a total attachment size of 2 mb, and might have several attachments. I have considered utilizing Parse API from SendGrid, but I am worried because they offer this service for free. I have contacted them and I am waiting for answer. Are there any better and more suitable alternatives?

  Read the article

• internet speed and routers are controlled by whom

  - by Ozgun Sunal

  i need to learn two things. each is related to other a bit. The first one is, while our LAN speed is usually 100 Mbps or at gigabit levels(very big compared to WAN speeds), WAN speed for instance DSL connections are far less than this. However, we are able to download huge files at those Mb speeds. Isn't this weird? [my real concern is why WAN speed is lower than LAN speeds] Who controls those routers around the large Internet? (while we, as web clients are connected to Internet, packets travel through those routers to the destination network/s).But, are those routers all inside the ISP network and if not, who controls those large numbers of routers?

  Read the article

• Free / Cached / Available memory on Linux

  - by pkoraca

  I have read that linux uses free memory for caching, to make system faster. However, both Nagios and Paessler PRTG monitoring system show me that my memory usage is critical. I could change Nagios mem_usage script to sum free and cached memory, but would that be correct information? I doubt that they misunderstood Linux memory usage. Lets say I have 8 GB RAM. 5 GB are used, 2 GB is cached, and I have 1 GB of free memory. Real available memory should be free+cached (3 GB)? If some new application would need additional 3 GB RAM, could it take everything from cache and free without using swap, or is there a minimum that should be in cache? Real example: $ cat /proc/meminfo MemTotal: 5984256 kB MemFree: 137052 kB Buffers: 140484 kB Cached: 3439616 kB SwapCached: 244 kB Active: 3148824 kB Inactive: 2341768 kB ... My monitoring tools show that I have 137 MB free RAM, however I have ~3,5 GB in Cache. Thanks!

  Read the article

• What is the Best Internet Provider in the Salt Lake Valley for hosting your future online business f

  - by Justin

  This is for people familiar with the ISP scene in Salt Lake. Also, UTOPIA is not available in my neighborhood yet. I'm looking for comparisons between Comcast, Qwest, and especially other providers I'm not aware of. While I will have online backup (of course!), I want to host some things from my own home at the start of my business. Once money starts flowing in, I will move to a hosted provider, but in the meantime I would like a provider which provides fast (1+ mb/s at least) upload speeds (fast download a given), a static IP, and especially a reasonable price.

  Read the article

• The very bare minimum of latex to compile documents

  - by ldigas

  I'm creating a relatively small console program which will be used by some other people as well. As part of its output it will be creating a tex file which will contain some two tables, a few rows of text and one plot. Not, my program is pretty small - under a Mb. The problem is I can't count on my users to have latex installed, so I'd like to include the very bare minimum required files to create it (pdf). What would be a good place to start searching on that topic, or even better, does anyone know what I would need to include with it to accomplish that ? I remember my last latex install being pretty ... well, gigantic. Kind regards !

  Read the article

• A good log file analyzer for windows

  - by Raminder

  Is there a text-editor for windows that can open for me first n lines of a large file? It would be nice if it could also open a set of lines from the middle of the file. EDIT: Basically my requirement is that I want to analyze huge(2GB) log files. So any good tool that can open huge files with some analysis capabilities(searching, text highlighting etc.) would be nice. I like notepad++ but it wouldn't open a file even of about 650 MB. P.S. - Open source tools will be preferred.

  Read the article

• User account automatically filling up with dead.letter file

  - by jeroen

  I have one user account on a server with about 400 accounts that is filling up automatically. The dead.letter file in the users home directory automatically grows until the account is full (about 10 - 40 Mb per day). The user is using Microsoft Outlook to send and receive mail. What can be causing this and how can I avoid it from happening? Right now I have an emergency cron-job to delete the file but I would like "real" solution. Edit: The server version is Red Hat Enterprise Linux ES release 4 (Nahant Update 4) Edit 2: It seems mainly spam and I see different mailer headings (from php to Outlook Express) and a frequent appearing header is [email protected] Update: I have asked the hosting provider where I use that dedicated server to look into the problem as well, as it's their Control Panel that could be a cause of the problem.

  Read the article

• Ubuntu 14.04 says insufficient memory in my /boot memory alocation while updating

  - by Aravind Dollar

  I am new to Linux platform. I just tried installing Ubuntu alongside windows but allocated only 200 mb to the /boot partition which is not recommended. Now Ubuntu software update keep on insists me no enough space. What should I do? Is there any way to increase my /boot partition without removing the total OS? Or should I completely uninstall Ubuntu and put it back? Please anyone suggest me over this issue. I have no idea what to do. And please be elaborate, as I am new to Linux environment.

  Read the article

• sata2 hdd not reported correctly on gigabyte mobo

  - by hyperboreean

  hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

  Read the article

• How do I split an internet connection into 4 equal connections?

  - by luis velasco

  My 4 roomates and I have a problem: One of my roomies is downloading torrents all the time. When somebody need make a call or doing something like you tube or a quiz using the internet conection. The internet is very slow.... I can not create a network using a computer as a proxy. I just need a good router (and in the budget no more than $50).. I just want to split a 16MB connection into a separated 4 x 4 mb (theoretically)..

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• OSX - Update "Java for OS X 2012-002" is not mentioned on support.apple.com, is this ok?

  - by snies

  Straight after installing "Java for OS X 2012-001" Software Update asks me to install "Java for OS X 2012-002", which has the exact same size (66.6 MB) and description (including the same two links: HT5055 and HT1222) as the former, which strikes me as odd. The "Java for OS X 2012-001" is described on the apple support pages, but the "Java for OS X 2012-002" is not mentioned anywhere. Also searching on google does not yield any usable results. What is your opinon? Am i paranoid? Did you also see this update?

  Read the article

• nginx static file buffer

  - by Philip

  I have a nfs which several frontend-servers are connected to for making the files stored on the nfs available for http downloads. It looks like I have problems with the way apache is serving the files, there seems to be a very small buffer or no buffer at all which results in a lot disk seeks. I did some testing with loading the whole requested file into memory at once and serve it to the client from memory. With this technique I need less disk seeks for a download stream. Since I don't want to implement this by myself for production use I thought that I could maybe use nginx for that because the documentation says that it uses buffers for static file serving. Is it possible to increase the buffer size to a few mb, if so which config parameter do I have to change for this? Has anyone experience with large buffers for static file serving? Is there a better way to reduce disk seeks?

  Read the article

• What is the right iptables rule to allow apt-get to download programs?

  - by anthony01

  When I type something like sudo apt-get install firefox, everything work until it asks me: After this operation, 77 MB of additional disk space will be used. Do you want to continue [Y/n]? Y Then error messages are displayed: Failed to fetch: <URL> My iptables rules are as follows: -P INPUT DROP -P OUTPUT DROP -P FORWARD DROP -A INPUT -i lo -j ACCEPT -A OUTPUT -o lo -j ACCEPT -A INPUT -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT -A OUTPUT -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT What should I add to allow apt-get to download updates? Thanks

  Read the article

• Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

  Read the article

• wake-up by the computer

  - by doug

  Hi there some time ago(10 years back) I've read on PC Magazine that some mainboards have some settings which allow to a computer to open at a certain hour. I need to make my computer to wake me up in each morning. How can I do that ? What MB settings allow this feature? ps: i will like to shout down the computer during the night(not sleep or hibernate mode). ATM I'm using windows xp and 7 on my computers.

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• Unable to change IP address for eth0 without restart in Ubuntu

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I tried to change the IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4 auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status When I issue: sudo service networking restart I get this response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart does the IP change. Any ideas?

  Read the article

• Combine OS partion with data partition on NAS4Free/FreeNAS

  - by Pak

  I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

  Read the article

• Lotus notes 8.5 quota

  - by Cividan

  we're using lotus notes 8.5 and I have a user who was over his quota as he had sent 6 email with attachement over 800 MB (no comment...) I deleted these oversized email and empty the trash but domino keep sending email warning about quota. I checked in the all documents view and they are no longer there, I re-did an empty the trash. I saw a post on the internet saying to compact his database, when I go under file, application, properties and click on the info tab, I see that he use 35.7% of the 3 GB database. when I click on "compact" I see a message saying the compact of the database is beeing process... the message disapear after about 1 minutes the message disapear but nothing else seem to happen and when I look back later on the space problem has not changed. any advice would be appreciated.

  Read the article

• How do I remove Windows Update uninstall files on Windows Server 2008?

  - by Robert Koritnik

  I'm running Windows Server 2008 Standard running in VMware. It has 2 disks: system disk: 16 GB data disk: 500 MB I installed Visual Studio 2008 SP1 + MSDN and some small tools and libraries that don't take much space. Over time the system disk's free space has been going down (I suspect because of regular system updates - NetFx (.NET), service packs, and regular updates). Questions 1 How do you remove Windows Update uninstall files from Windows Server 2008? Question 2 I also found lots of files in C:/Windows/Installer folder. Is it possible to determine which .msp file goes with which patch? I would like to delete some of them, because they do take a lot of space.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >