Search Results

Search found 2219 results on 89 pages for 'odd parity'.

Page 58/89 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Why do I have problems downloading some iPhone attachments from Exchange?

  - by CT

  Lately I have been getting an increasing number of complaints regarding users not being able to download attachments synced from Exchange with their iPhone. The iPhones in question are either 3G or 3GS with firmware 3.0 or later. Exchange 2007. The majority of messages come in just fine. Some however display: "This message has not been downloaded from the server" where the email's text normally should be. At the bottom of the email, it states: "This message is only partially downloaded." It has a button labeled "Download remaining 0 bytes." If you click this button, it states that it is loading and then reverts to the same screen. The odd part is that this only affects some emails. Most come in fine with attachments working. I've taken the same email that was not working on my iPhone. Sent it to a gmail account that my iPhone had access to. The message and attachment opened fine. Any ideas of possible causes I could look into? Thanks.

  Read the article

• Alternatives to ntbackup

  - by Chris J

  Is anyone aware of any good (for a given value of "good") alternatives to ntbackup? There's a few quirks with ntbackup that I still find odd, and occasionally (and for no obvious reason) ntbackup just doesn't back up - usually complaining about that the wrong tape's inserted even though it's been told to just use the tape that's in the drive regardless. I've experiemented with cygwin's tar and cpio and Win32 ports of these utilities, but I've not had any luck getting them to see the tape device (so if someone does use these utilities to write to a tape device, also be interested to know how). Essentially all I'm looking for is a reliable program that I can tell to back-up a list of locations to the tape, and not to care about anything like formatting tapes, or sticking volume labels on them (and conversely then makes it fairly straightforward to restore off as well). On the flip-side, I don't want something that will attempt to manage our tapes. Don't get me wrong here -- ntbackup can do the job, but its quirks are making look at possible alternatives. Any suggestions? If it's open source, even better.

  Read the article

• Haproxy not properly passing on X-Forwarded-For header

  - by JesseP

  I have backend web servers that receive requests by way of haproxy-nginx-fastcgi. The web app used to see multiple ip's coming through in the X-Forwarded-For header, chained together with commas (most original IP on the left). At some point in the recent past (just noticed, so not sure what caused it) something changed, and now I'm only seeing a single IP passed in the header to my web application. I've tried with haproxy 1.4.21 and 1.4.22 (recent upgrade) with the same behavior. Haproxy has the forwardfor header set: option forwardfor Nginx fastcgi_params config defines this header to be passed to the app: fastcgi_param HTTP_X_FORWARDED_FOR $http_x_forwarded_for; Anyone have any ideas on what might be going wrong here? EDIT: I just started logging the $http_x_forwarded_for variable in nginx logs, and nginx is only ever seeing a single IP, which shouldn't ever be the case, as we should always see our haproxy ip added in there, right? So, issue must either be in nginx handling of the variable coming in, or haproxy not building it properly. I'll keep digging... EDIT #2: I enabled request and response header logging in HAProxy, and it is not spitting anything out for X-Forwarded-For, which seems very odd: Oct 10 10:49:01 newark-lb1 haproxy[19989]: 66.87.95.74:47497 [10/Oct/2012:10:49:01.467] http service/newark2 0/0/0/16/40 301 574 - - ---- 4/4/3/0/0 0/0 {} {} "GET /2zi HTTP/1.1" O Here are the options i set for this in my frontend: mode http option httplog capture request header X-Forwarded-For len 25 capture response header X-Forwarded-For len 25 option httpclose option forwardfor EDIT #3: It really seems like haproxy is munging the header and just passing on a single one to the backend. This is fairly impacting to our production service, so if anyone has an ideas it would be greatly appreciated. I'm stumped... :(

  Read the article

• Windows Media Based video audio converter?

  - by acidzombie24

  This may seem like an odd question. Right now ONLY windows media player, VLC and media player classic opens and plays my audio video correctly. Virtualdub plays it back with the wrong framerate and losses the audio, Avidemux 2.5 seems to be able to dump the audio/video but the video (like all other apps) is either a bad framerate or is wrong (glitches and bad framerate or bad dump). Nothing recognizes the audio file and when playing the video Avidemux (and most other things) die. FFMPEG cant seem to split the video or audio (using copy -an and etc) and this is getting me very angry. VLC dumps the video incorrectly when i try dumping it with that too. What can i use to convert the video? its streaming so it starts at 26mins in and ends at 28 (this is where apps have the problem. They dont know this and fudge everything or crash). I manage to dump the audio with Avidemux but virtualdub and ffmpeg says unreconized codec. Even if i cant convert it (it seems compressed enough) i want to at least attach it back into an AVI.

  Read the article

• exFAT to NTFS formatting troubles

  - by user1083734

  I recently ran a chkdsk on 2.5" 230GB SATA HDD but the plug was pulled before the end of the chkdsk and since then it wouldn't boot up. Deciding to scrap all data on the HDD (no longer needed it), I then fitted it into an external HDD caddy and (in diskpart) cleaned the disk, created new partition and volume and tried to format it to NTFS. It couldn't do this on long or short formats and so I went with the less-appreciated alternative - exFAT (I run Win7). It quick formats to exFAT fine but encounters errors during long format. At the moment it is exFAT. Of course I would really like it to be NTFS as I will probably need to use it on Win XP too. Could anyone suggest a method of trying to reformat to NTFS? Do you think that, when chkdsk was interrupted first time, the disk was corrupted and is irretrievable? I find this situation slightly odd, as it HAS formatted to exFAT and DOES seem to work when I copy files across! Also, I CAN use disk management console to create several partitions: e.g. a 50GB partition and then a large 180GB partition. The 50GB and WILL long-format to NTFS but the 180GB will not! I'm thinking hardware fault, but then I notice that it WILL format to exfAT! Much confusion!

  Read the article

• Server 2003 Terminal Services Printers not redirecting, no sessions created.

  - by mikerdz

  Ok, odd scenario on a Windows Server 2003 Server Standard running as Terminal Server. Friday, installed 2 new Windows 7 machines to replace older XP machines. After adding these machines and their local printers, none of the otehr 16 Windows 7 machines can redirect printing to the server. I have checked Global Policy on domain controller, nothing is being blocked. In Terminal Services Manager, the client settings are set to User Client Settings. On RDP client, port redirection is enabled. I have tried disabling the Use Client Settings option and manually selected the options for print redirection and default printer connection, but still does not work. After some reaserching, I found this MS article: http://support.microsoft.com/kb/2492632 I went ahead and added the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\fEnablePrintRDR DWORD that the article references and set it to "1" to enable the option. I restarted the server, but still would not print. I am getting quite desperate with this issue because nothing seems to have changed when installing the two new clients and printers. I uninstalled the print drivers for the printers from the server. I have even gone as far as connecting each of the printers manually via UPD (\computername\printer) but even thought it works, it prints awfully slow. Please help!!!!

  Read the article

• Why is Safari on my computer rendering all of the colors -- not just for images -- incorrectly?

  - by richardhenry

  I’m not just talking about image color profile issues; every single color that the browser renders is incorrect. It’s like it’s in it’s own color space (or something!). Screenshot: http://drp.ly/DJk1O (Opera, Safari, Chrome, Firefox) Spot the odd one out? Open this up in Photoshop or similar and try using the eyedropper to select the colour. Safari renders the same hex color completely differently. That color is set using a background-color declaration in CSS, so it should be identical in all four of those browsers. Here’s the HTML I was using: <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html lang="en"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8"> <title>untitled</title> <style type="text/css"> body { background-color: #114742; } </style> </head> <body> </body> </html> Literally every website I’m viewing with my install of Safari is displaying colors incorrectly. The blue of the bar on Facebook is slightly less rich. This doesn’t occur on any other Macs I’ve tried. Any idea what’s happened to my Safari install?

  Read the article

• Deciphering an IIS6 Httperr log file

  - by smackaysmith

  We have a Windows 2003 R2 SP2 server with iis6 that is creating a 1024kb httperr file every minute. I can't figure out what I'm looking at. Here's a snippet: 2010-03-24 13:15:05 10.53.2.35 1667 10.53.2.12 80 HTTP/1.1 PUT /hserver.dll?&V01|&IMAC=0080646077AB|CID=32|CN=LWT0080646077AB|ED=1|IP=10.53.2.35|SM=255.255.255.0|GW=10.53.2.1|SN=10.53.2.255|DM=logs.com|1D=10.53.2.12|2D=10.101.2.12|0D=1|AL=/usr/sbin/netxserv|AV=4.1.0.0|CP=VIAüEstherüprocessorüü800MHz|CPS=800|RM=190512|B1=1.18|PD2=1024x768x16ü@ü60Hz|IM=6.6.2-02|CI=3600|SN#=6KHDG301300|OS=23|VI=1|P1=24|TZO=-301|TZ=CDT|FS=128|MD=2003-04|CO=|LO=|AP0=BaseüSystem|NA|6.6.2-02|AP1=RapportüAgent|NA|4.1.0-3.26|AP2=TrueType|NA|6.8.0-3.4|AP3=WebFonts|NA|2.0.4-3.6|AP4=TrueTypeüFonts|NA|6.8.0-3.5|AP5=Network_login|NA|1.0.0-1.0.3|AP6=ScreenüSaver|NA|3.13|AP7=DMonitor|NA|1.0.0-0.4.0|AP8=MozillaüFirefox_15|NA|1.5.0.8-3.6|AP9=RemoteüShadow|NA|3.17|AP10=RemoteüDesktop|NA|1.6.0-1.0|AP11=SNMP|NA|5.1.3.1-3.13|AP12=LinuxüPrinting|NA|3.8.27-3.33|AP13=SSH|NA|3.8.1-3.25|AP14=ThinPrint|NA|6.2.87-0.2|AP15=XDMCP|NA|6.8.0-3.29|AP16=Ericom|NA|8.2.0-3.29|AP17=Daylightüsavingütimeüupdate|NA|1.1.0-1.0.0| 411 - LengthRequired - What on earth am I looking at? Nothing in the system or app logs. Finally, in iis manager, Default Web Site label has boxes instead of spaces. Very odd.

  Read the article

• Firefox crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

  Read the article

• Windows 2008 64bit: applications and explorer always hang

  - by Phil Farthing

  I setup a couple of Window 2008 64bit systems about 5 months ago. Initially all seemed well. Now however, for no apparent reason, things are dog slow, apps hang, explorer hangs, just clicking on something can cause a CPU spike of 100%, and often it's explorer that is eating it up. As I have two on identical hardware, and they experience the same problem, it doesn't seem related to addon software. The only thing these have in common is Kaspersky and I've tried disabling/uninstalling to no avail. There are no useful error messages in the event logs. Actually, the system never even reports app hangs. Sometimes, it similar to what I've seen on Windows 7 systems where the screen goes milky and asks if I want to trouble shoot, that's only when get impatient and click happy. The really odd thing, is that it will NOT do this for a few minutes at a time, and then starts up again. Like I will click on the start menu and browse for the Admin Tools, the start menu will hang at some point and I'll have to wait about a minute, then it's OK. The next time I do this, a few seconds later, it's fine. Every click seems to hang the first time around, then be ok the second time if I do the exact same thing. If anyone has any suggestions, please PLEASE let me know! thanks =)

  Read the article

• How to move the Windows 7 bootloader to the Windows 7 partition?

  - by pauldoo

  I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

  Read the article

• Cannot access firewalled jboss server from Internet Explorer

  - by Simon Gibbs

  I've produced a website for a client One Single Menu using JBoss and hosted it on Rackspace Cloud Servers running Ubuntu's Maverick Meerkat. Following advice, I esablished some iptables rule to protect jboss: iptables -I INPUT 1 -i lo -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -I INPUT -p tcp --dport 8080 -j ACCEPT iptables -t nat -A OUTPUT -o lo -p tcp --dport 80 -j REDIRECT --to-port 8080 iptables -A INPUT -j DROP Now, several versions of IE on several computers on at least two different ISPs cannot access the onesinglemenu.com. Curl from within the datacenter, Firefox, and Safari on the same ISPs can all access the server fine. I even tried IE and Firefox on the same computer and IE failed but Firefox worked. The error behaviour is that IE hangs on connecting without reporting an error, even after a minute or so. No page is displayed at all. I find it quite odd that I'm having a browser specific connection issue, but it appears to be the case. Help!

  Read the article

• Ubuntu 12.04 - HP ProLiant DL380 G4 - Load Maxes Out / Unresponsive

  - by Brian S

  Trying to post this question on here. I've posted it on the Ubuntu forums as well with no replies. Recently I upgraded an HP ProLiant DL380 G4 server from Ubuntu 10.04 server to Ubuntu 12.04 server. Upon doing so, the server will not - at random times - get to a load of 400+ and then become completely non-responsive. I use an SNMP graphing program (cacti) and the load steadily increases by about 10 every five minutes until it gets over 400 and the graphing stops. The graphs may not be accurate, but the CPU load averages about 3% before this happens - and right when the load starts increasing, it jumps to about 25% for 15 minutes and dramatically dips down to less than 1% (about 0.3%) until the graphing stops. I'm not able to open a SSH tunnel to the server to do anything. I've checked the /var/log/syslog and all logging stops at that time as well - with nothing else in there. The odd thing is - the server still responds to DNS queries for the zones it is authoritative on during this time - and at normal speed. Just not sure what the next step would be in order to find out what is going on - and how this issue can be corrected. The server cannot stay with Ubuntu 10.04 Server and needs to stay upgraded.

  Read the article

• Firefox crash on first load on Ubuntu Linux on Windows Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then everything stops: disk, icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in).

  Read the article

• Windows 7, network shares, and authentication via local group instead of local user

  - by Donovan

  I have been doing some troubleshooting of my home network lately and have come to an odd conclusion that I was hoping to get some clarification on. I'm used to managing share permissions in a domain environment via groups instead of individual user accounts. I have a box at home running windows 7 ultimate and I decided to share some directories on that machine. I set it up to disallow guest access and require specifically granted permissions. (password moe?). Anyway, after a whole bunch of time i figured out that even though the shares I created were allowed via a local group i could not access them until i gave specific allowance to the intended user. I just didn't think i would have to do that. So here is the breakdown. Network is windows workgroup, not homegroup or nt domain PC_1 - win 7 ultimate - sharing in classic mode - user BOB - groups Admins PC_2 - win 7 starter - client - user BOB - groups admins PC_3 - win xp pro - client - user BOB - groups admins the share on PC_1 granted permission to only the local group administrators. local user BOB on PC_1 was a member of administrators. Both PC_2 and PC_3 could not browse the intended share on PC_1 because they were denied access. Also, no challenge was presented. They were simply denied. After adding BOB specifically to the intended share everything works just fine. Remember, its not an nt domain just a workgroup. But still, shouldn't i be able to manage share permissions via groups instead of individual user accounts? D.

  Read the article

• Can I autoregister my clients/servers in local DNS?

  - by Christian Wattengård

  Right now I have a W2k12 server at home that I run as a domain controller. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my servers). I need to rework my home network for several odd reasons, and in this new scenario there is no place for a big honking W2k12 server box. I have a RasPI, and I have other smallish linux boxen I can use. (In a worst case scenario I'll use my NUC, but then I'll be forced to use my home cinema's UPnP-client for media... The HORROR!!) Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubunto flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment? (Bonus comment upvote for naming the naming scheme :P )

  Read the article

• Disk Error on Boot (Possible boot sector issue)

  - by Choco

  I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

  Read the article

• Anyone else experiencing high rates of linux server crashes today?

  - by Bron Gondwana

  Just today, Sat June 30th - starting soon after the start of the day GMT. We've had a handful of blades in different datacentres as managed by different teams all go dark - not responding to pings, screen blank. They're all running Debian Squeeze - with everything from stock kernel to custom 3.2.21 builds. Most are Dell M610 blades, but I've also just lost a Dell R510 and other departments have lost machines from other vendors too. There was also an older IBM x3550 which crashed and which I thought might be unrelated, but now I'm wondering. The one crash which I did get a screen dump from said: [3161000.864001] BUG: spinlock lockup on CPU#1, ntpd/3358 [3161000.864001] lock: ffff88083fc0d740, .magic: dead4ead, .owner: imapd/24737, .owner_cpu: 0 Unfortunately the blades all supposedly had kdump configured, but they died so hard that kdump didn't trigger - and they had console blanking turned on. I've disabled console blanking now, so fingers crossed I'll have more information after the next crash. Just want to know if it's a common thread or "just us". It's really odd that they're different units in different datacentres bought at different times and run by different admins (I run the FastMail.FM ones)... and now even different vendor hardware. Most of the machines which crashed had been up for weeks/months and were running 3.1 or 3.2 series kernels. The most recent crash was a machine which had only been up about 6 hours running 3.2.21.

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• Destroyed user account on OS X with dscl; how to restore? [migrated]

  - by Sam Ritchie

  I was trying to create a new user on my OS X Lion machine, and somehow managed to destroy my own user's account. Here are the steps I took; hopefully someone here can recognize what I did, and maybe identify some way around this. First, I ran these commands: sudo dscl localhost -create /Local/Default/Users/elasticsearch sudo dscl localhost -create /Local/Default/Users/elasticsearch /bin/bash # mistake! sudo dscl localhost -create /Local/Default/Users/elasticsearch UserShell /bin/bash sudo dscl localhost -create /Local/Default/Users/elasticsearch RealName "Elastic Search" sudo dscl localhost -create /Local/Default/Users/elasticsearch UniqueID 503 # MY uniqueID sudo dscl localhost -create /Local/Default/Users/elasticsearch PrimaryGroupID 1000 sudo dscl localhost -create /Local/Default/Users/elasticsearch NFSHomeDirectory /Local/Users/elasticsearch The big mistake I made here was using "503", which was my user's UniqueID. Immediately my shell username changed to "elasticsearch". I fiddled around, tried to change the current user with sudo su -u sritchie, but this didn't work. On restart, only the "Elastic Search" user was available. I logged into the Lion Recovery partition and reset the root password. After logging in as root and checking on the terminal, I made the remarkable discovery that my home folder was totally empty. I deleted the elasticsearch user, but it made no difference. I don't see anything in Deleted Users either. The odd thing is that when I log in now as myself (sritchie) I can see desktop icons with previews. I can even open a few text files from the Downloads folder if I use the dock alias to Downloads. Could this data be hiding somewhere? Any help would be REALLY appreciated! Thanks, Sam

  Read the article

• SSD Drive not being recongized in BIOS

  - by chobo2

  Well I bought my first drive Mushkin Chronos 180GB and got it installed in my computer and loaded up. I went to windows 7 and initialized the drive and then I installed "SSDlife Free" and loaded it up and my the SSD drive came up said it was "powered on 3 times"(thought it was odd but then thought maybe some testing???). I then restarted my computer and loaded into Acronis. Went to my SSD drive and make a partition called windows(made a basic logical partition). I then loaded up Norton ghost and wanted to copy my current windows onto the SSD drive on the partition I made found out I could not do it through the recovery disk so I made a backup of my windows drive and wanted to then restore it onto the SSD drive. Came back an hour later when the backup was done. I tried to restore the it on my SSD drive and could not find the partition so I loaded up Acronis again and it did not see it. I then went to the bios and saw only my other hard drive. What I tried Tried uplugging and replugging in both sata and power cables. Tried using the power and sata cable from the working drive and giving it the ones that SSD drive were using. Tried Sata AHCI Mode (Intel ICH9 Southbridge) Tried SATA PORT0-1 NATIVE MODE (Intel ICH9 Southbridge) Nothing worked. Software / hardware Windows 7 ultimate Gigabyte S-Series GA-P35-DS3L Mother board I hope someone has some ideas on why it is not being recognized.

  Read the article

• dovecot login issue with plain passwords

  - by user3028

  I am having an odd problem in dovecot, the first time I try to login via telnet dovecot gives a error, the second time it works, both within the same telnet session. This is the telnet session, note the 'BAD Error in IMAP command received by server' and the "a OK" just after that : telnet 192.168.1.2 143 * OK Waiting for authentication process to respond.. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] Dovecot ready. a login someUserLogin supersecretpassword * BAD Error in IMAP command received by server. a login someUserLogin supersecretpassword a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS] Logged in dovecot configuration >dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-34-generic x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no login_trusted_networks = 192.168.1.0/16 mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } This is the log file: Jul 3 12:27:51 linuxServer dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:27:51 linuxServer dovecot: auth: Debug: auth client connected (pid=23499) Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011no-penalty#011lip=192.168.1.2#011rip=192.169.1.3#011lport=143#011rport=50438#011resp=<hidden> Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): lookup service=dovecot Jul 3 12:28:06 linuxServer dovecot: auth-worker: Debug: pam(someUserLogin,192.169.1.3): #1/1 style=1 msg=Password: Jul 3 12:28:06 linuxServer dovecot: auth: Debug: client out: OK#0111#011user=someUserLogin Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master in: REQUEST#0111823473665#01123499#0111#0113a58da53e091957d3cd306ac4114f0b9 Jul 3 12:28:06 linuxServer dovecot: auth: Debug: passwd(someUserLogin,192.169.1.3): lookup Jul 3 12:28:06 linuxServer dovecot: auth: Debug: master out: USER#0111823473665#011someUserLogin#011system_groups_user=someUserLogin#011uid=1000#011gid=1000#011home=/home/someUserLogin Jul 3 12:28:06 linuxServer dovecot: imap-login: Login: user=<someUserLogin>, method=PLAIN, rip=192.169.1.3, lip=192.168.1.2, mpid=23503, secured

  Read the article

• Lucid Lynx login issue

  - by Bart Silverstrim

  Recently upgraded from Karmic to Lynx. Upgrade seemed to go well, no noticeable issues. I logged in, and my window manager wasn't starting. An application would appear, but sans control buttons and border, so figured the windows manager needed to be given a swift kick. Opened a web browser and a quick google had me run "metacity --replace &" and everything popped up. I re-ran the Compiz configuration tool to enable my rotating desktop cube to the way I liked it, and had to reconfigure my desktop switcher to the right number of desktops (although the first time I ran it, it crashed on the panel and reloaded...odd, but once it relaunched it seemed fine.) Today I installed updates, rebooted and logged in for the second time since my upgrade. Again, the window manager was dead, and my compiz settings were gone, and the workspaces were set back to four (and when I clicked on the preferences to change them, it crashed on the panel and reloaded again). Resetting everything made things look somewhat normal again. I'm guessing it'll work until I reboot again. Googling around isn't turning up similar complaints about Lucid Lynx and the window manager. Before I go deleting preference files, anyone else know of this kind of issue and what could be done about it? Or should I start taking the stab in the dark approach of deleting preference files hoping one of them is corrupt or has something unsupported in it that's throwing LL for a loop?

  Read the article

• Why can't I route to some sites from my MacBook Pro that I can see from my iPad? [closed]

  - by Robert Atkins

  I am on M1 Cable (residential) broadband in Singapore. I have an intermittent problem routing to some sites from my MacBook Pro—often Google-related sites (arduino.googlecode.com and ajax.googleapis.com right now, but sometimes even gmail.com.) This prevents StackExchange chat from working, for instance. Funny thing is, my iPad can route to those sites and they're on the same wireless network! I can ping the sites, but not traceroute to them which I find odd. That I can get through via the iPad implies the problem is with the MBP. In any case, calling M1 support is... not helpful. I get the same behaviour when I bypass the Airport Express entirely and plug the MBP directly into the cable modem. Can anybody explain a) how this is even possible and b) how to fix it? mella:~ ratkins$ ping ajax.googleapis.com PING googleapis.l.google.com (209.85.132.95): 56 data bytes 64 bytes from 209.85.132.95: icmp_seq=0 ttl=50 time=11.488 ms 64 bytes from 209.85.132.95: icmp_seq=1 ttl=53 time=13.012 ms 64 bytes from 209.85.132.95: icmp_seq=2 ttl=53 time=13.048 ms ^C --- googleapis.l.google.com ping statistics --- 3 packets transmitted, 3 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 11.488/12.516/13.048/0.727 ms mella:~ ratkins$ traceroute ajax.googleapis.com traceroute to googleapis.l.google.com (209.85.132.95), 64 hops max, 52 byte packets traceroute: sendto: No route to host 1 traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 *traceroute: sendto: No route to host traceroute: wrote googleapis.l.google.com 52 chars, ret=-1 ^C mella:~ ratkins$ The traceroute from the iPad goes (and I'm copying this by hand): 10.0.1.1 119.56.34.1 172.20.8.222 172.31.253.11 202.65.245.1 202.65.245.142 209.85.243.156 72.14.233.145 209.85.132.82 From the MBP, I can't traceroute to any of the IPs from 172.20.8.222 onwards. [For extra flavour, not being able to access the above appears to stop me logging in to Server Fault via OpenID and formatting the above traceroutes correctly. Anyone with sufficient rep here to do so, I'd be much obliged.]

  Read the article

• How to configure IIS for SVG and web testing with Visual Studio?

  - by macias

  Let's say I have a simple web page with svg image in it: <img src="foobar.svg" alt="not working" /> If I make this page as static html page and view it directly svg is displayed. If I type the address of this svg -- it is displayed. But when I make this as .aspx page and launch it dynamically from Visual Studio I get alt text. If I type the address of this svg (from localhost, not as a local file) -- browser tries to download it instead of displaying. I already defined mime type in IIS (for entire server -- "image/svg+xml") and restarted IIS. Same effect as before. Question: what should I do more? Update WireShark won't work (it is in documentation), I tried also RawCap, but it cannot trace my connection (odd), luckily Fiddler worked: From client: GET http://127.0.0.1:1731/svg/document_edit.svg HTTP/1.1 Host: 127.0.0.1:1731 User-Agent: Mozilla/5.0 (Windows NT 6.1; rv:10.0.1) Gecko/20100101 Firefox/10.0.1 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate Connection: keep-alive Answer from server: HTTP/1.1 200 OK Server: ASP.NET Development Server/10.0.0.0 Date: Thu, 16 Feb 2012 11:14:38 GMT X-AspNet-Version: 4.0.30319 Cache-Control: private Content-Type: application/octet-stream Content-Length: 87924 Connection: Close <?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <svg xmlns: *** FIDDLER: RawDisplay truncated at 128 characters. Right-click to disable truncation. *** For the record, here is useful Q&A for Fiddler: http://stackoverflow.com/questions/826134/how-to-display-localhost-traffic-in-fiddler-while-debugging-an-asp-net-applicati

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >