Search Results

Search found 46073 results on 1843 pages for 'rating system'.

Page 580/1843 | < Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >

  • Do virtual machines perform better on the host HDD or USB drive?

    - by Jeremy Ricketts
    The question I'm asking is kind of general, and I'll give more specifics about my specific setup. Here's the main question though: Do virtual machines generally perform better on the host HDD or is it better to operate them from an external disk? My specific setup: A Macbook Pro with a nearly full internal SATA drive that spins at 7200. On this system I'm running large programs like Photoshop and some other RAM-intense applications. I've dedicated 2 of my 8 gigs of RAM to my VMware Fusion virtual machine, which runs Windows 7 and Visual Studio, sits on the same drive. When that thing boots up, my system really starts crawling. I have an external USB (specifics of that drive are here) which I'm thinking about moving the VM to. Obviously a USB drive is slower than my internal HDD, but maybe having two operating systems using the same disk is WORSE than putting one of them on a separate (albiet slower) disk. This a bad idea?

    Read the article

  • EMC CX3-10c Fault Condition won;t clear

    - by ITGuy24
    We have an old CX3-10c from Dell that had both Standby Power Supplies (SPS) fail. This obviously caused a fault on the system and disabled the cache. We have replaced the SPS's and they test fine as do all other components. Problem is there is still a fault on the "Enclosure SPE [SPE3]" despite all the component in the enclosure showing as good. I was on the line with Dell Gold support for 3 hours yesterday, they have had me restart the SPs multiple times, as well as reseat the power supplies, even shutdown the system completely and power it back on. All to no avail. Fault remains and cache cannot be re-enabled so long as the Fault is present. Any suggestions on clearing this erroneous fault?

    Read the article

  • Microsoft Cluster or Oracle Fail Safe error

    - by osdm
    Trying to get Oracle Database 10g to work on Microsoft cluster (using Oracle Fail Safe, not RAC). Everything installed, but when trying to verify group or add database to group I get following error: FS-10220: Network name MSK00-NST01-1 maps to IP address 10.1.11.74 in the cluster resource but maps to IP address 10.1.1.74 on the system MSK00-NST01-1 is cluster name, 10.1.11.74 is first node IP, 10.1.1.74 is second node IP. Oracle documentation says "The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster." Where is the error - in Oracle configuration or in cluster configuration? What are possible ways to correct it? Thanks a lot for any ideas.

    Read the article

  • Configuring BitLocker on existing Windows Server 2008

    - by neildeadman
    On our file server, we want to enable BitLocker so that we can encrypt a single drive and I know that we have to also encrypt the drive the system is installed on. In my tests with VMs, I have to create a partition on the same disk as Windows is installed either before I install Windows or after (I can use the BitLocker Drive Preparation Tool). This tool shrinks the C: drive to make way for a 1.5GB partition. I'm a little concerned about doing this with a live system so wanted to see if it was possible to get BitLocker to use a partition on another drive?

    Read the article

  • Windows 8 Activation - Product ID: Not available

    - by Guy Thomas
    The situation: I downloaded Windows 8 RTM from MSDN (I have a subscription). Naturally, I downloaded the product key as well. Windows 8 installed like a dream: lightning fast with no problems. I accepted the product key at the beginning of the install. Next, I thought I would download Updates, but they failed, so I checked the system's activation in Control Panel System. Problem: It returned "Product ID: Not available." There's nothing under "Windows activation" that I can click on, no blue links. I had a 'Chat' with MSDN, who introduced me to SLUI.exe. On Windows 8 it did nothing. (On Windows 7 it is supposed to bring up the Activation Menu). I phoned the Microsoft Activation number, they told me to contact MSDN. MSDN left the 'chat' by telling me to contact Microsoft! Hmm... I wonder if anyone at SuperUser can help?

    Read the article

  • Shared storage solution for our sql server backups

    - by Gokhan
    We have 3 clustered sql servers. We have 5+ multi terrabyte databases and their backup files (compressed using quest litespeed) are hitting over 600gb each, We are required to keep at least a week or two weeks (if we can) of weekly full backups and then 6 days differential backups, and a week or 2 weeks worth of log backups local. We are currently limited to 2TB volumes from our san team, we can have multiple volumes but they are expensive ($200 per raw TB per month) and having to deal with many backup volumes instead of a single big volume is difficult. I think if we could have a shared network storage of 20TB+ raid 10 or so for all our servers for keeping the backups and another department will copy them to tape from the network storage and delete files according to the retention period would be good, if this box would be a build in operating system (even unix a complete file storage system) that would be good. What do you guys think, does this make sense to you, is there any manufacturer that sells a storage product like that which that work in a clustered environment? Thank you

    Read the article

  • Brocade 200E Switch - Fibre Channel

    - by Arthor
    What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

    Read the article

  • How likely can my data be recovered after Windows CHKDSK performed on a degraded RAID 5 array?

    - by chrisling106
    Hello there, We have a RAID 5 setup with 3 SATA disks, #2 went down as reported on the pre-POST screen. Unfortunately, for some reason out of my control, the system was rebooted with a degraded RAID :-O Windows XP (64-bit) loaded, CHKDSK ran automatically and done its recovery! From that point onwards, the following error prompts every time even in Safe Mode: lsass.exe - The endpoint format is invalid I took those 3 disks to the data recovery expert and need to wait at least 2-4 days for results. There are 2 VMs on multiple files stored in this RAID 5 array, and there's no backup! Sorry, I just inherited the system from an ex-staff who has left the company 2 months before I joined. How likely the data can be recovered?

    Read the article

  • Why does diskpart set the volume attributes on all volumes?

    - by Nick
    I was trying to migrate a Win7 OS from a HDD to a SSD. I've created 2 partition with 1024KB offset, with diskpart: 100MB System Reserved and a 60GB for C:. I've cloned their contents using Easeus Disk Copy. I've loaded the Windows 7 Boot DVD, and wanted to use diskpart to drop the letter for the System Reserved partition and make it hidden. select volume 0 detail volume attribute volume set nodefaultdriveletter attribute volume set hidden These 2 attribute set commands actioned on both volumes (0 and 1, MSR and C:) instead of the selected one, and viceversa. I've tried to clear these attributes from volume 1, but it cleared them also from volume 0. Why does DiskPart have this behaviour?

    Read the article

  • Rules to choose hardware for OLTP systems (sql server)

    - by Roman Pokrovskij
    Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

    Read the article

  • Transferring DHCP using Windows Server Migration Tool - Why is Powershell is crashing on the import of the .mig file?

    - by Mike
    I am migrating DHCP from a windows server 2003R2 DC to a Windows Server 2008R2 DC I've followed this video and its predecessor (Installing Windows Server Migration Tools) http://technet.microsoft.com/en-us/video/migrating-dhcp-using-the-windows-server-2008-r2-migration-tools.aspx I went through everything smoothly until the last step. I have exported a .mig file with my DHCP configuration on the old 2003r2 server. I transferred this .mig file over to my 2008R2 server, when running the import command, it will appear to work for a minute or two and then I get a generic windows "Powershell has stopped working" error and I have to close the program. Under the problem details I see the following: FileVersionOfSystemManagementAutomation: 6.1.7600.16385 InnermostExceptionType: System.AccessViolationException OutermostExceptionType: System.AccessViolationException DeepestPowerShellFrame: unknown OS Version: 6.1.7600.2.0.0.272.7 LocaleID: 1033 Seems like there are permissions issues maybe? I am running powershell as an admin and am logged in to the server as a domain administrator. Any Ideas? Thanks

    Read the article

  • DNS NS and domain clarification

    - by thejartender
    I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

    Read the article

  • Mac OS X: How to change word separator characters?

    - by avetis.kazarian
    Depending on your system, the word separator characters change the way you can select/delete a word (e.g. by double clicking on it or using a key combination with your keyboard). The fact is that I hate the default behavior of OSX. For example: Take the following line of code: obj.attr1.innerAttr. If my cursor is at the end of the line and I press alt + backspace, it will delete everything and not just innerAttr. I only found some apps (like iTerm) which let you change the word separator characters. Is there a way to change it for the whole system?

    Read the article

  • Dell PowerEdge R720 - Corrupted RAID

    - by BT643
    Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

    Read the article

  • How can I copy the output from a remote command into the local clipboard?

    - by cwd
    I use iTerm2 as my terminal client in Mac OS X. On the local system I can use pbcopy and pbpaste to transfer data between the system clipboard and the terminal, but of course this doesn't work when you're ssh'ed to another machine. Is there some way which I can take the result of a command and copy it to the clipboard automatically? Perhaps an applescript to grab the text on the iTerm windows, then get the next to last line? For instance, if I wanted to copy the current working directory: I run pwd, then use the mouse to select the text, and then press command + c. Is there any better / faster / automatic way of doing this? I'm not looking for a bulletproof solution that would work for every command (eg: might not work when there is a huge scrollback) - I'm just looking for something to make this task that I do quite often a little less tedious. Update I'm looking into using screen to do this, but I'm still not sure if it is possible.

    Read the article

  • How can I upgrade bash to >= 4.1 on CentOS 5.5?

    - by Agvorth
    I have a CentOS 5.5 VPS server. I want to use RVM. According to the console output when I run the RVM installer, RVM requires bash = 4.1. I just ran yum update. My bash version is now 3.2.25. If I understand how yum works, that means that 3.2.25 is sort of the version of bash that "belongs with" my CentOS version, and it's the latest version I can get using yum. (Right? Or am I wrong about this?) How can I get that on my CentOS 5.5 system? To clarify, I understand that I can just download the source and install, but I'm hesitant to break out of yum's version management system. Is there a way to upgrade bash without disrupting yum?

    Read the article

  • SQL Server NETWORK SERVICE account permissions

    - by RemotecUk
    My SQL Server Windows service is set to use the NETWORK SERVICE account. The server is installed to C:\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL. However looking at the permissions on that folder, NETWORK SERVICE does not have any permissions. The groups which are allowed access to that folder are... CREATOR OWNER - who is this? SYSTEM - sounds fine - so that Windows can access the folder I presume? SQLServerMSSQLUser$Computer_Name$MSSQLSERVER - this is the interesting one - what is this? Administrators Users If NETWORK SERVICE is a user with minimal permissions on the system and looks to the O/S as someone connecting from a network how does it have permissions to access any files in the SQL Server install folder? Thanks.

    Read the article

  • Linux-Vserver: How to do upgrade Debian 5.0 to 6.0 on vservers and main machine?

    - by Bartosz Kowalczyk
    I have server with debian lenny. I installed vserver on this server a few years ago. Summary I have 5 guest of vservers and main system, now. Each guest is debian lenny. Now, I'm wanting upgrade from lenny to squeezy on this servers (each Vservers and main machine). Do you do it? I should upgrade as usually system ? First I should upgrade every vserver next main machines and I have to do reset all machines and vservers? Please, advise me how to do it ?

    Read the article

  • Optimal Configuration for five 300 GB 15K SAS Drives

    - by Bob
    I recently acquired an HP Z800 workstation that has five 300 GB 15K SAS Drives. This system will be dedicated to running multiple virtual machines under VMware Workstation (Note: I'm not using ESXi because I do plan to use the system for other purposes.). For the host OS, I plan to install RHEL 5. My number one concern is guest performance. For example, should I create a RAID 10 array for the OS and virtual machine storage with four of the drives and reserve the 5th? Or, is there a solution that will provide better performance?

    Read the article

  • Linux software Raid 10 no superblock

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2. I tried to reassemble manually with all the device names but it still would not bring up the raid 10 complaining about the missing superblock on sda2, and sda1 was also dropped from the raid 1. When I did examine on the raid10 it says that 1 of the initially failed drives is a spare, the other is spare rebuilding and sda2 is removed. It seems that sda decided to fail right when the system was vulnerable to it because when I boot up a live cd it spews out sda unrecoverable read failures. I have been trying to fix this all week but I'm not sure where to go with this now, I ordered more hard drives because I didn't have a complete backup, but its too late for that now and the only thing I could do is mirror all the hard drives onto the new ones (I'm not sure whether sda was mirrored without errors). On the internet I read that you can recover from this by recreating the array with the same options as when it was made, however because sda is failing I cant use it and I don't want to risk using its mirror instead, so I'm waiting to get another hard drive. I'm also not sure whether to include the out of sync drives or if I can actually use those instead to recover the array. Sorry if this is a mess to read but I've been trying to fix this all day and its late at night now, any thoughts on this would be greatly appreciated. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris

    Read the article

  • Webcam microphone input in Gnome/pulseaudio

    - by sdaau
    Just got a "Trust" webcam, which gets recognized on my Ubuntu Lucid. It has a built in microphone - which also gets recognized - however, I cannot really get it to act as the system microphone input? Here are some screenshots of what is shown by gnome-volume-control: The default window shows Trust webcam - which has two profiles: "Analog Mono Input" and "Off" - of course, I have it on "Analog Mono Input": However, on the "Input" tab - there is no matching "device for sound input" - neither a matching connector: Then I installed pavucontrol - but that doesn't show that much more; it tells first that gnome-volume-control reads from "Internal Audio Analog Stereo": Then in "Input devices" tab, there is again nothing resembling the mic input from webcam: Finally, under "Configuration" tab, the "Trust" webcam shows, but even if its profile is on "Analog Mono Input", nothing much happens:   So, does anyone know how I could get this webcam microphone to be recognized as the system input? Many thanks in advance for any answers, Cheers!

    Read the article

  • graphic error on console

    - by Christian Elsner
    I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

    Read the article

  • Installing CentOS on remote machine.

    - by vijay.shad
    Hi, Can I do a fresh install of centos linux distribution on a remote machine? I have got a machine with windows NT system in a remote location. Now i want to use that system as my deployment machine. To proceed on my plan i need to install a linux os(have chosen CentOS). The guy with machine there is not very much aware of the installation process of any OS. So i thought of the remotely install. Please give me some insight how can i achieve this?

    Read the article

  • UUID in Mountain Lion

    - by Naji
    I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

    Read the article

< Previous Page | 576 577 578 579 580 581 582 583 584 585 586 587  | Next Page >