Search Results

Search found 19539 results on 782 pages for 'pretty print'.

Page 584/782 | < Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >

• Server specification recommendation

  - by foo

  To cut the story short, I can't buy an item (server/cpu/motherboard/ram) that costs more than USD 330. However, I can combine them, meaning, I can buy a CPU that costs USD 330 and motherboard that costs USD 330. With this limitation, I can't buy a powerful 1U server which will definitely costs me more USD 330. With that in mind, I was hoping to build a powerful desktop PC which will be used as a database server. However, through my experience, desktop PC doesn't last very long, usually the motherboard will just die by itself after 1 or 2 years. So, what would you guys recommend me to buy with this kind of budget? Every item must be <= USD 330. Will be used as a MySQL server. RAID would be nice. 1TB is pretty big for my data. I do not need external graphic card (onboard would do just fine), mouse, keyboard, monitor. Linux friendly. One ethernet port is good enough. It's important that those hardware is made of components that will last long (at least 3 years or something). The server will be placed in an air conditioned room, but a good ventilation for the server is always preferred. I won't overclock it. Intel processor is preferred. Thanks in advance.

  Read the article

• iptables port redirection on Ubuntu

  - by Xi.

  I have an apache server running on 8100. When open http://localhost:8100 in browser we will see the site running correctly. Now I would like to direct all request on 80 to 8100 so that the site can be accessed without the port number. I am not familiar with iptables so I searched for solutions online. This is one of the methods that I have tried: user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 80 -j ACCEPT user@ubuntu:~$ sudo iptables -A INPUT -p tcp --dport 8100 -j ACCEPT user@ubuntu:~$ sudo iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-ports 8100 It's not working. The site works on 8100 but it's not on 80. If print out the rules using "iptables -t nat -L -n -v", this is what I see: user@ubuntu:~$ sudo iptables -t nat -L -n -v Chain PREROUTING (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 redir ports 8100 Chain INPUT (policy ACCEPT 14 packets, 2142 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 177 packets, 13171 bytes) pkts bytes target prot opt in out source destination The OS is a Ubuntu on a VMware. I thought this should be a simple task but I have been working on it for hours without success. :( What am I missing?

  Read the article

• One Apache server, multiple clients - best practices for config files?

  - by OttaSean

  First time user; please be gentle. :-) (And if you don't like my question I'd be grateful for a comment as to why...) I am doing a contract at a government server shop that provides web services for multiple client groups in other areas of the government. My employer has asked me to look into how other shops, in similar situations, handle configuration files, and whether there are any best practices on the subject. I'm pretty sure there are lots of installations out there running multiple VirtualHosts out of one Apache installation, but surprisingly I couldn't find anything online about how people handle config file layout, so was hoping some of you wise folks on ServerFault might have some thoughts or pointers for me. The current setup - which seems logical to me - is that each client site has its own directory off the root - so: /client/tps-reports/ /client/silly-walks/ /client/ministry-of-magic/ and so on - and each of those directories has a /htdocs, /cgi-bin, and /conf (among others). The main /etc/apache/httpd.conf only contains Include statements (and lots of comments), the last of which is: Include /etc/apache/vhosts/*.conf The vhosts directory contains symlinks: tpsrept.conf - /client/tps-reports/conf/tpsrept.conf sillywk.conf - /client/silly-walks/conf/sillywk.conf mom.conf - /client/ministry-of-magic/mom.conf Each of those .conf files contains the actual NameVirtualHost definition and a gigantic <VirtualHost 192.168.12.34> stanza - which contains all the stuff about the specific site. The idea is that clients have access to what's in their own /client/xx directory, so they can change stuff in the section of the config that is relevant to them. As I mentioned above, that seems fairly logical to me, but I'm wondering if any of you wise folks are aware of potential gotchas with this sort of layout, or any other thoughts on why it is or isn't a good idea. In particular, how do other places do it? Is there a "best practice" for this sort of thing? Many thanks in advance for your time and any thoughts you all might have.

  Read the article

• How to set up multi users on dev server with git and github

  - by Derek Organ

  I'm working on lamp application. We have 2 servers (Debian) Live and Dev. I constantly work on dev main to add new features and fix bugs. When happy all works well I scp the relevant code to the Live system. Database (mysql) is local to each machine. Now this is pretty basic setup really and I want to improve the workflow a bit. I use git and github for version control. Admittedly I've only really used one branch. Their can be 3 different developers who work on the code at different times. We all use the same linux username to connect to the dev server and edit the code directly when needed. I usually then commit and push the code at the end of the day to github. One thing to bare in mind is it isn't easy to run this code on a local machine as there are many apache and subdomain configurations that wouldn't work on a local machine so it is important to work on the dev server not locally. I need to create a new process because we need to have a main trunk now and a branch with a big code re-write. What is the best way to do this. Should I create different unix logins for each developer and set up different working areas on the dev server for there changes? e.g. /var/www/mysite_derek /var/www/mysite_paul /var/www/mysite_mike my thinking is they can do a pull from the main branch and then create there own branch and merge it back in. I'm not sure how this will work though with git locally and with github. will i need to create different github user accounts as well. I'd like to do this the 'right' way and future proof for having lots of potential developers but I also don't want to over complicate it. I simple and elegant solution is preferred. any recommendations or suggestions?

  Read the article

• how to remove location block from $uri in nginx configuration?

  - by Jason

  I have a rewrite in my ngix conf file that works properly except it seems to include the location block as part of the $uri variable. I only want the path after the location block. My current config code is: location /cargo { try_files $uri $uri/ /cargo/index.php?_REWRITE_COMMAND=$uri&args; } Using an example url of http://localhost/cargo/testpage the redirect works, however the value of the "_REWRITE_COMMAND" parameter received by my php file is "/cargo/testpage". I need to strip off the location block and just have "testpage" as the $uri I am pretty sure there is a regex syntax to split the $uri and assign it to a new variable using $1 $2 etc, but I can't find any example to do just a variable assignment using a regex that is not part of a rewrite statement. I've been looking and trying for hours and I just can't seem to get past this last step. I also know I could just strip this out on the application code, but the reason I want to try to fix it in the nginx conf is for compatibility reasons as it also runs on Apache. I also should say that I have figured out a really hacky way to do it, but it involves an "if" statement to check for file existance and the documentation specifically says not to do it that way. -- UPDATE: ANSWERED BY theuni: The regex goes in the location block definition. one note of caution is that php handler location needs to be ABOVE this location, otherwise you will get a server error because it goes into an infinite redirect loop location ~ ^/cargo/(.*) { try_files $1 /cargo/$1/ /cargo/index.php?_REWRITE_COMMAND=$1&args; }

  Read the article

• Web shortcuts (.url) not working on Windows 7

  - by jpbochi

  I'm experiencing several symptoms, but I believe they are all related to web link files not working. First, I can't create we link files anymore. When I try New Shortcut and put an URL, I get the following error message: Second, existent shortcuts are not working. The default context menu action (or double-click) is Print, which simply prints an empty page. If I try to see its properties, there's no URL there. Third, IE bookmarks are also not working. One difference is that the default action is Open, IE does nothing when I click it. Adding a new bookmark only creates one more dead link file. I'm almost sure this problem occurred after I tried to install IE 7 on Windows 7. Unfortunately, it didn't work because the OS seems to be bound to IE 8. I already tried to reinstall/repair IE 8, but it made no difference. Does anyone experienced a similar problem? I need a working solution, but I welcome any reasonable suggestion.

  Read the article

• Ubuntu server 10.04 disconnects after short periods of inactivity on my site

  - by Melot

  Hi! I'm new to Ubuntu (installed it for the first time just a couple of days ago on my server). I've Ubuntu Server 10.04 and am just using the terminal, no GUI like Gnome. So far it's working pretty great except for one big thing. Whenever I go to sleep and there's no activity on my server (it's not a big site so active users drop to 0 during the night), the server kind of disconnects. The only thing that can bring the site back online is to restart the whole server. I've tried disabling powersaving by using setterm but that changes nothing. Even if I wake up the server by pressing any key or so the site wont go back online! I've tried just restarting both Apache and MySQL (I'm using LAMP-server btw) but not even that works. But as soon as I turn the power off and on at the server, everythings work like normal for a couple of minutes of inactivity (~5-15 minutes I'd guess) and then it's down again unless someone logs in to the site and is active. I was previously using XAMPP on my laptop with Windows XP and that worked 24/7 so I don't think it's anything with my router or ISP. This is driving me crazy! My site is down all the time I'm in school as I have no possibility to restart the server if it becomes offline. Does anyone have a clue to what could be wrong?

  Read the article

• FTP Scripting Capabilities

  - by lmg

  I am looking for an FTP client that will allow me to do the following Include a GUI for setting up a number of FTP connections Support FTPS Run unattended on Windows Server 2008 Retry failed transactions Support email Support custom scripts I need to pull files from a few different servers and there are certain calculations that need to be done depending on which server the files come from. I've looked at SmartFTP and it looks like pretty much what I need except I can't get it to run as a Windows Scheduled Task (I currently have some support threads open in their forum). I've also looked at a few other FTP clients (Filezilla, RoboFTP, and AutoFTP (you can find the Windows 7 BSOD in this one!)) that haven't had the capabilities I'm looking for. Right now, I'm looking at WS_FTP and its scripting capabilities. It appears I can create a script to run as a scheduled task, but I can't add the script to a file transfer task. Does anyone have suggestions on how I can do post-transfer processing on the files or better yet how to integrate scripting into the file transfer task? I'm also open to other suggestions for FTP clients as well if you have them! If I can't find a suitable FTP client, custom scripting will just have to do the trick.

  Read the article

• Matched or unmatched drives for RAID arrays?

  - by Will

  Looking around there is conflciting information on this, with some strongly suggesting one or the other. From my understanding the issue with matched drives is that the wear on both drives is more or less the same, so the potential for the second drive failing with or very soon after the first is pretty high. People also claim matched drives give substianatally higher performance however assuming the unmatched drives are more or less the same (eg 2, 1 TB STATA II 7200rpm drives with 32MB cache), would the minor differences between say a Seagate and a Western Digital one (say one has a 128MB/s read rate, and the other a 150MB/s read rate, as well as I guess various other minor differences) actually cause any notable performance loss, ie potentialy worse than two matched 128MB/s drives, or does RAID not really care and give you essentially an optimal solution (eg upto 278MB/s total read speed for RAID 0 and 1) and similar for other RAID with more "unmatched" drives (5 and 1+0 come to mind as possibilities)? Also I couldnt find much info on how this is different on different RAID setups, eg RAID 0 or RAID 1, software or hardware RAID, etc. I'm assuming such things have an effect, and thats it's not all the same for RAID in general?

  Read the article

• Computer makes odd noise. Replace almost every component. Computer still makes odd noise.

  - by ShimmerGeek

  My PC was getting pretty old, 5 years or so, and over the course of it's life I replaced the graphics card, HDD and a couple of sticks of RAM; but the PSU, processor, motherboard, fans etc. were all original. A few weeks ago, I started hearing an odd noise. I struggle to describe it, it sounded sortof like the 'click of death' you hear when a HDD may fail, but not quite... (And it was far less irregular) Also, I was sure I heard it once or twice a minute or two after I shut down the PC. This was going on very irregularly for a couple weeks. Some days I would hear no noise at all, others I would hear it often, maybe once every 30 seconds or so. I could find no common denominator - i.e. it did not happen more during gaming or any other intensive use. Anyway, I need my PC to sit some classes over the summer, so I put it in for them to run a HDD stress test and to replace a bunch of the components. I ended up replacing almost everything - the only elements I still have are my blu-ray drive and graphics card. They said when they started to run the HDD stress test it failed instantly (They started the test and it immediately said 'Test Complete' so they assumed it was at fault, and put a new HDD in since I was still under warranty with them.) I took it home a few hours ago, and I am still hearing the noise!!! Do you guys have any theories? I'm getting a little worried, I can't afford for my PC to suddenly fail during the next month - I have a lot of coursework to do. Any thoughts? Is it possible it could be the fan on the graphics card? I'm confused because it's so irregular. Any help would be much appreciated.

  Read the article

• Using Plesk for webhosting on Ubuntu - Security risk or reasonably safe?

  - by user66952

  Sorry for this newb-question I'm pretty clueless about Plesk, only have limited debian (without Plesk) experience. If the question is too dumb just telling me how to ask a smarter one or what kind of info I should read first to improve the question would be appreciated as well. I want to offer a program for download on my website hosted on an Ubuntu 8.04.4 VPS using Plesk 9.3.0 for web-hosting. I have limited the ssh-access to the server via key only. When setting up the webhosting with Plesk it created an FTP-login & user is that a potential security risk that could bypass the key-only access? I think Plesk itself (even without the ftp-user-account) through it's web-interface could be a risk is that correct or are my concerns exaggerated? Would you say this solution makes a difference if I'm just using it for the next two weeks and then change servers to a system where I know more about security. 3.In other words is one less likely to get hacked within the first two weeks of having a new site up and running than in week 14&15? (due to occurring in less search results in the beginning perhaps, or for whatever reason... )

  Read the article

• Best way to patch (8) RJ45 ports from one room to another.

  - by zimmer62

  I have a 48 port patch panel in my basement, which I've wired almost all of them to various rooms around the house. Many are not actually being used at the moment, but pretty much all of them are wired to somewhere. As of recent, I've put in an HTPC in my media closet (different room), and I'm finding I need a lot more RJ45 plugs to this area. I have 4 drops here, and adding a switch will not solve my problems. I'm using the cabling for other things such as IR and Serial devices, not just Ethernet. What I'm hoping to do is add an 8 port panel in that media closet, and tie those into an 8 port panel on my rack next to the 48 port... What I don't want to do is pull 8 separate cables one by one from one area to the other unless someone has a technique that will allow me to do that quickly, and painlessly. Do they make cables with more conductors specifically for this purpose? Or patch panels that are designed for a special cable essentially just extending ports from one room to another?

  Read the article

• Exchange 2007 Backup - For a newbie

  - by mew3900

  I am trying to setup an exchange 2007 backup solution. After doing a lot of reading, Microsoft have decided in server 2008 unless you are willing to spend a great deal on a 3rd party solution you are pretty stuck! Essentially what I have been asked to do is perform an off-line file backup of our current exchange server and replicate this onto a new 2nd server. The reasoning behind this is that we need to upgrade our current installation of exchange 2007 to SP2 so that the exchange plug-in for windows server backup will be available to us. From this I can then actually take an exchange aware backup weekly and take it off site. Ideally then also we can migrate to this new server and keep the old one as a fail over. Is there a way I can copy across the files required onto a second server, although I doubt very much it is that simple. I may be barking up completely the wrong tree, however I have very limited knowledge with Exchange and any help and advice on how I would resolve this would be much appreciated. Thanks in advance

  Read the article

• Linux servers in a (primarily) Windows (AD) environment

  - by HannesFostie

  When I arrived at my current position, our environment existed almost exclusively of Windows servers. However, I am a big fan of using Linux for certain applications, like the webgallery I was asked to set up, a simple SFTP server, Nagios for monitoring etc. I do fine setting these up, but not being the Linux expert, I am not sure how to properly join these servers to the domain and was therefor wondering what procedures or guidelines other people follow. We often use ping -a to quickly figure out the hostname of a certain server, but this does not seem to work for the linux machines, most likely because of the whole WINS/NetBios thing I assume. I just joined one server to the domain, but probably missed something cause it's not working even after a dnsflush. Next to that, the couple procedures I've found so far are pretty extensive and most of the time don't seem worth the time. Best case scenario, I download some kind of client (smbclient?), enter the domain name and maybe the server to use, supply an administrator password and that's it. Is that possible at all? Thanks

  Read the article

• Windows 7 delayed file delete

  - by GregoryM

  I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate. UPD: maybe some shadow copying or system restore services (though I have the system restore turned off) block the files? Can't even guess...

  Read the article

• Two cisco gigabit switches refuse to link to each other. Any idea why?

  - by Prody

  I have 3 Linksys SR2024 switches which are basically non-managed 24 port Gbit + 2 miniGBIC. I now had to add another switch to the network, and my provider didn't have the SR2024 switch anymore, so I got the Cisco SLM2024 which was a bit more expensive. It's pretty much the same thing but with management (that I don't need). So I've connected the SLM2024 to a SR2024 via Cat6 cable, and for some strange reason, I get no link. If I connect any machine with a Gbit NIC to both switches, it links with 1Gbit autonegotiated. If I connect the SLM2024 to a non-Gbit switch (I have a cheap 4port ASUS switch), it will link just fine on 100Mbit full duplex. Since the SLM2024 has management, I've tried to see if something is misconfigured on it's side, but it's not, it advertises 1Gbit and lower. (hence the machines connecting succesfully at 1Gbit). Since the SR2024 that I'm trying to connect it to also connects successfully with another SR2024 and other Gbit machines, it means that it advertises Gbit too. But for some reason when I link the SR2024 to the SLM2024 I get no link. Please note that I've properly tested the wire. Does anyone have any idea what's wrong?

  Read the article

• Safely transfer files from pc with internet connection to lan without allowing any other form of communication

  - by Hugh Quenneville

  In the company that I work there are computers that are connected to the Internet and computers that are connected to a Local Area Network. The LAN is considered a "safe zone" and the files that reside there should never be copied/moved to a computer that has Internet Access. So, now, if we want to download an installer for an application for example, we download it in a pc that has Internet Access and then move it using a "secure USB stick" to the Local Area Network. Is there a way to create an "safe, one-way connection" between a computer with Internet access and a computer from the LAN? This practically means that only files from the computer with the Internet access can be copied/moved to the LAN. In addition to that, if you want to transfer files you would have to provide your security credentials for the network (so, that only users with the appropriate access levels will be able to transfer files). Is it possible to create something like that and make it completely safe (or at least "equally safe" with the USB method that we currently use) or the fact that the computer with Internet access is connected with a wire to the LAN is a security risk by itself? NOTE: the LAN setup involves 2 Windows 2003 servers with Active Directory, Web servers and pretty much all the services that you would expect to find in a Windows network.

  Read the article

• Printer irregularly producing garbage output

  - by John Gardeniers

  Every now and then instead of getting the proper output we get numerous pages, mostly with just a single line, of output which appears to be the raw PCL. My theory is that this happens when the first byte or two of the document is somehow not received by the printer, which then doesn't know how to interpret the rest and does it's best by spitting it out as text. This is a problem I've seen many times over the years but has been popping up more often since we upgraded to Win 7 64 bit, which introduced a number of headaches because of the HP lack of real support for 64 bits. It also appears to happen most often when printing PDF files. We have tried several different PDF readers in addition to Adobe's own but that hasn't helped. While we mainly use HP printers, and the problem is not limited to any particular model, I've also seen it happen on other brands, albeit to a lesser extent. I've also been unable to discern a difference between printers used via a print server or those connected directly by IP address. It also happens to USB attached printers. Because of the erratic nature of this problem there is precious little I can think of to try and debug it, so I'm after any ideas that might help to eliminate it.

  Read the article

• I really need help resolving a Window Vista BSOD (Blue Screen Crash) on my desktop

  - by anonymous

  Hi, thanks for taking the time to read this. I'll get straight to the details. My desktop is on the fritz; it keeps going to blue screen with the stop message of 0x0000007E immediately after the loading bar of vista, right before transitioning to the account selection screen. My desktop runs on a dual-core 32-bit processor with windows Vista Home(?) installed. I have 3 GB of ram as two separate modules, a 1GB acer module and a 2GB geil module. I have an ati video card, unfortunately I cannot recall the exact name but the chipset is ATI and the manufacturer is Sapphire and the card is on the lower end. My hard drive is 320GB (i think) partitioned into two. The C:\ partition is red lined, while the D:\ partition is still pretty empty. As per the advice of my friend, i tried restarting the system with the graphics card removed. Upon failure, i repeated the process removing one RAM module one at a time, but the system still failed to load. Vista would attempt to repair the system and it would initially report that the system was fixed, but vista really failed to fix the problem. After removing the memory modules, vista started to report it's inability to fix the problem. I tried running on safe mode and the driver listing would always stop at crcdisk.sys. I ran memory diagnostics using the windows memory diagnostic tool found in the screen after vista's failed attempt to fix the problem with no luck. the problem details are as such: Problem Event Name : StartupRepairV2 Problem Signature 01: AutoFailover 02: (vista's version number?) 03: 6 04: 720907 05: 0x7e 06: 0x7e 07: 0 08: 2 09: WrpRepair 10: 0 OS Version: 6.0.6000.2.0.0.256.1 Locale ID 1033 any correct advice would be appreciated as i really need my pc to work so i can work on my projects. kinda sad, but i'm college of computer science and i have no idea what to do :P

  Read the article

• Diagnosing PC crashes (most often while using shared folders or torrents)

  - by Dyppl

  For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

  Read the article

• SSH access to VM on windows 8 hyper-v

  - by samw

  I'm currently attending University and prefer a Linux environment to do much of my work, but all I have is a ThinkPad running Windows 8 Pro. Cygwin is nice, but it leaves me missing things like apt-get. My latest solution is to run an Ubuntu 12.04 VM with Windows 8's Client Hyper-V and use Cygwin for SSH access. I've looked everywhere online trying to set this up, but I haven't found much help. I've done this before using VirtualBox, so I figured this would be possible as well. Could anyone provide advice for setting up this environment? I'm completely uninitiated to Linux networking, virtual networking, and... pretty much all networking configuration, so this has been quite a challenge for me. What I've done so far: Created an external virtual switch to my wireless NIC. With this, I could successfully SSH to the VM with the leased IP address. But without a static IP, I would soon get disconnected. Created an internal virtual switch and attempt to "share" my main internet connection. (I was following the description on this page) Thank you all in advance!

  Read the article

• Provide a user with service start/stop permissions

  - by slakr007

  I have a very basic domain that I use for development. I want to create a GPO that provides users in the Backup Operators group with start/stop permissions for two specific services on a specific server. I have read several articles about this, and they all indicate that this is very easy. Create a GPO, give the user start/stop permissions to the services under Computer Configuration Policies Windows Settings Security Settings System Services, and voila. Done. Not so much, but I have to be doing something wrong. My install is pretty much the default. The domain controller is in the Domain Controllers OU, the Backup Operators group is under Builtin, and I created a user called Backup under Users. I created a GPO and linked it to the Domain Controllers OU. In the GPO I give the Backup user permission to start/stop two specific services on the server. I forced an update with gpupdate. I used Group Policy Results to verify that my GPO is the winning GPO giving the user the permission to start/stop the two services. However, the user is still unable to start/stop the services. I attempted different loopback settings on the GPO to no avail. I'm sort of at a loss here.

  Read the article

• Corrupted Laptop - Transfer Data Without My Computer (explorer.exe) Using Command Line

  - by nicorellius

  I have a laptop (Toshiba Satellite) that is pretty messed up. The person this belongs too already replaced it with a new machine. My job is to transfer all her data from this machine to disk so that I can transfer it to her. She doesn't want to lose any data (understandably so). Any operation I attempted (i.e., double clicking on any folder icon, like My Documents, My Computer, etc) resulted din a complete crash. The only good news is that I can actually start and navigate around using the command line. Also, I can access the internet. I have a network, so if I can map the drives I can get this thing figured out (hopefully). Also, I tried a USB drive but I couldn't figure out how to access it from the command line. Two questions (I need to use the command line for these): How would I go about accessing the USB drive and how can I map the shared drives on my network so that I may cd to that directory for use of the copy command?

  Read the article

• Need some help figuring out BB4Win or any of its varieties: does it replace windows explorer?

  - by StormRyder

  I don't really care too much about replacing original Windows the desktop, taskbar and system tray. I really dislike the new Win7/Vista Windows Explorer: Screenshot here (just to make sure there's no confusion) So, what I'm trying to figure out is whether BB4Win or its plugins have a replacement for it. The bb4win website pretty much doesn't make sense to me. I'm using Win7 64 bit. Also, off-topic ... I was looking at a related question on this site here: Good Windows shell replacement Why can't I add comments? I wanted to ask the same question I'm asking now as a comment under the answer given by Molly7244, the person who answered with suggesting BB4Win. But there seems to be no way to add new comments anywhere! Why? Am I missing something? I don't quite understand the weird way this site is set up... I'm used to the more typical forum format. Sorry. Thanks for any help!

  Read the article

• My system is always disk-bound (the disk light is always on). Why is this?

  - by Scoobie

  I have been given a laptop by the good folks at my company on which to do my work (Java development). I usually use eclipse as my primary development platform. The laptop is a Dell D830 and runs Windows 7 - 32 bit. Although the processor supports a 64 bit instruction-set, licensing limits me to running the 32 bit OS. The HDD is a WD1600BEVT (Western Digital). I have noticed that my disk is always very slow. Windows start up is usually pretty quick, however as soon as I log on, my disk light stays on and usually, the laptop takes about 4 minutes (after logging in -- immediately upon getting the prompt to press Ctrl + Alt + Del to log in) before it's usable. Questions: Is this expected behavior? What can I do to examine the disk and determine the cause of the problem? What can I do to improve my disk's performance? Any optimizations you may be able to suggest? Other Questions: Some have suggested running Process Monitor (from sysinternals), but how would i get the log since start up? Instead of trying to fix this myself, should I simply push this onto the system administrator? Thanks all.

  Read the article

< Previous Page | 580 581 582 583 584 585 586 587 588 589 590 591  | Next Page >