Search Results

Search found 19115 results on 765 pages for 'region specific'.

Page 586/765 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

  • SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

    - by dansays
    For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

    Read the article

  • How to resolve virtual disk degraded in Windows Server 2012

    - by harrydev
    I am using the new Storage Spaces feature in Windows Server 2012. I have the following disks: FriendlyName CanPool OperationalStatus HealthStatus Usage Size ------------ ------- ----------------- ------------ ----- ---- PhysicalDisk2 False OK Healthy Auto-Select 2.73 TB PhysicalDisk3 False OK Healthy Auto-Select 2.73 TB PhysicalDisk4 False OK Healthy Auto-Select 2.73 TB PhysicalDisk5 False OK Healthy Auto-Select 2.73 TB There is also a separate OS disk. The above disks are part of a single storage pool: FriendlyName OperationalStatus HealthStatus IsPrimordial IsReadOnly ------------ ----------------- ------------ ------------ ---------- Pool OK Healthy False False Within this storage pool some virtual disks are defined, see below: FriendlyName ResiliencySettingNa OperationalStatus HealthStatus IsManualAttach Size me ------------ ------------------- ----------------- ------------ -------------- ---- Docs Mirror OK Healthy False 500 GB Data Mirror Degraded Warning False 500 GB Work Mirror Degraded Warning False 2 TB Now the virtual disks are all running normal 2-way mirror, but two of the virtual disks are degraded. This is probably because one of the physical disks was offline for a short period of time. However, now the virtual disk cannot be repaired, even though, all physical disks are healthy. There is plenty of available space in the storage pool. This I cannot understand so I was hoping for some help, on how to resolve this? Below I have listed the full output from the Get-VirtualDisk CmdLet for the "Work" disk: ObjectId : {XXXXXXXX} PassThroughClass : PassThroughIds : PassThroughNamespace : PassThroughServer : UniqueId : XXXXXXXX Access : Read/Write AllocatedSize : 412316860416 DetachedReason : None FootprintOnPool : 824633720832 FriendlyName : Work HealthStatus : Warning Interleave : 262144 IsDeduplicationEnabled : False IsEnclosureAware : False IsManualAttach : False IsSnapshot : False LogicalSectorSize : 512 Name : NameFormat : NumberOfAvailableCopies : 0 NumberOfColumns : 2 NumberOfDataCopies : 2 OperationalStatus : Degraded OtherOperationalStatusDescription : OtherUsageDescription : Disk for data being worked on (not backed up) ParityLayout : PhysicalDiskRedundancy : 1 PhysicalSectorSize : 4096 ProvisioningType : Thin RequestNoSinglePointOfFailure : True ResiliencySettingName : Mirror Size : 2199023255552 UniqueIdFormat : Vendor Specific UniqueIdFormatDescription : Usage : Other PSComputerName :

    Read the article

  • Puppet variables best practice, generalise or specialise?

    - by Andrei Serdeliuc
    I'm trying to figure out which things should be in git within the puppet manifest and which should be in env vars like FACTER_my_var and use that in the manifest instead. Scenario: you are deploying 3 php apps and you've already built all the layers up to the app in other manifests (base system, php extensions, users, etc), and all that's left is installing the correct app (from an apt repo) and creating a vhost. I'm tempted to have something along the lines of: apache::vhost { $::project_hostname: priority => '10', port => '80', docroot => $::project_document_root, logroot => "/var/log/apache2/${$::project_name}", serveradmin => '[email protected]', require => Package[httpd], ssl => false, override => 'all', setenv => ["APP_KERNEL dev"] } This would run on each server, and the FACTER_project_* vars would be set on a per server basis. An obvious restriction of this would be that you can't run more than one app with this specific example. Or would you rather have project_x.pp, project_y.pp which have hardcoded paths and names?

    Read the article

  • Standard PHP configuration command for centos 6.5

    - by Krishna
    First of all let me tell you my knowledge in managing server and configuring script is very basic. Now I am trying to setup a server for my personal use. My server is up and running in Centos 6.5 with PHP, MySql and ISPConfig. I felt that even PHP is installed it needs some configuration for a standard web server. I searched on and found some 'configure' command but none working. The reason they did not have a specific step by step guidance on how to do this. Can somebody help me to configure PHP in a standard way? Thanks in advance. Some more detail, as required - 1. I did not install PHP from source. 2. Yes, I want some standard modules to be enabled in PHP 3. I also want to know do I need to change some settings on default? I do have a managed VPS, so do you suggest me to copy php.ini from that VPS to new dedicated server so all required settings which is working fine for me to be copied here also? Thanks

    Read the article

  • SBD killing both cluster nodes when there are even small SAN network problems

    - by Wieslaw Herr
    I am having problems with stonith SBD in a openais-based cluster. Some background: The active/passive cluster has two nodes, node1 and node2. They are configured to provide an NFS service to users. To avoid problems with split-brain, they are both configured to use SBD. SBD is using two 1MB disks available to the hosts via an multipath fibre-channel network. The problems start if something happens with the SAN network. For example, today one of the brocade switches got rebooted and both nodes lost 2 out of 4 paths to each disks, which resulted in both nodes committing suicide and rebooting. This, of course, was highly undesirable because a) there were paths left b) even if the switch would be out for 10-20 seconds a reboot cycle of both nodes would take 5-10 minutes and all NFS-locks would be lost. I tried increasing the SBD timeout values (to 10sec+ values, dump attached at the end), however a "WARN: Latency: No liveness for 4 s exceeds threshold of 3 s" hints that something isn't working as I would it expect to. Here is what I would like to know: a) Is SBD working as it should killing nodes when 2 paths are available? b) If not, is the multipath.conf file attached correct? The storage controller we use is an IBM SVC (IBM 2145), should there be any specific configuration for it? (as in multipath.conf.defaults) c) How should I go about increasing the timeouts in SBD attachements: Multipath.conf and sbd dump (http://hpaste.org/69537)

    Read the article

  • What could cause random files being downloaded without permission?

    - by Dustin
    I have been having issues lately with a certain directory. It seems someone is placing files into it, or something of that sort, and any attempt to delete them is successful, HOWEVER they reappear over time (maybe not the exact same ones, but random files). I will provide you the information I can and several pictures of my problem: sandbox.mys4l.com/visual/files/b1.jpg Files like this have been appearing in my /visual/ folder, and I have no clue where they are coming from. sandbox.mys4l.com/visual/files/b2.jpg This is what is inside on of those weird files, it appears to be nothing problematic. sandbox.mys4l.com/visual/files/b4.jpg As you can see, in the time it took me to take the first picture, more odd files showed up. These log files are also being uploaded to this directory, and I know I didn't put them there. sandbox.mys4l.com/visual/files/b7.jpg This inside one of these mysterious .log files, I'm not sure what it's all about. These files only appear to be going into this specific area, and I'm not sure of their origin, only that they will not go away. I have done a full system scan at least twice with an up-to-date virus scan, and have looked for an unknown script which may be writing them there. Nothing has come up, so I come to you guys as I hear this is the best place to find answers. Hope this problem has a solution!

    Read the article

  • Can Windows logoff events be tracked?

    - by Massimo
    I'm working on an application to track network user logon/logoff events in an Active Directory domain; the application will work by auditing security logs on domain controllers. Auditing logon events can get somewhat tricky, but it can succesfully be done. My problem: how can I track logoff events? Based on some research I've done, it looks like these events are only logged locally on workstations, but not on DCs; also, the "lastLogoff" attribute exists on AD user objects, but it's not actually used by anyone. This is a very specific question: is something logged on DCs when a user logs off from a domain workstation? To clarify: I'm not intereseted in other auditing mehods, I can't deploy logon/logoff scripts and I can't install anything anywhere; I also know opened and closed network sessions are logged, but this is not what I'm looking for. I need to audit interactive logons and logoffs to domain workstations, and I can do this by only reading domain controllers security logs; reading each workstation's local event logs is out of question. If this can't be done, it's ok; but I need a clear answer on that. Can this be done? If yes, how?

    Read the article

  • Find and Replace String in filenames

    - by shekhar
    I have thousands of files with no specific extensions. What I need to do is to search for a sting in filename and replace with other string and further search for second string and replace with any other string and so on. I.e.: I have multiple strings to replace with other multiple strings. It may be like: "abc" in filename replaced with "def" * String "abc" may be in many files "jkl" in filename replaced with "srt" * String "jkl" may be in many files "pqr" in filename replaced with "xyz" * String "pqr" may be in many files I am currently using excel macro to get the file names in excel and then preserving original names in one column and replacing desired in the content copied in other column. then I create a batch file for the same. Like: rename Path\OriginalName1 NewName1 rename Path\OriginalName2 NewName2 Problem with the above procedure is that it takes a lot of time as the files are many. And As I am using excel 2003 there is limitation on number of rows as well. I need a script in batch like: replacestr abc with def replacestr pqr with xyz in a single directory. Will it be better to do in unix script?

    Read the article

  • How to convert Markdown files to Dokuwiki, on a PC

    - by Clare Macrae
    I'm looking for a tool or script to convert Markdown files to Dokuwiki format, that will run on a PC. This is so that I can use MarkdownPad on a PC to create initial drafts of documents, and then convert them to Dokuwiki format, to upload to a Dokuwiki installation that I have no control over. (This means that the Markdown plugin is no use to me.) I could spend time writing a Python script to do the conversion myself, but I'd like to avoid spending time on this, if such a thing exists already. The Markdown tags I'd like to have supported/converted are: Heading levels 1 - 5 Bold, italic, underline, fixed width font Numbered and unnumbered lists Hyperlinks Horizontal rules Does such a tool exist, or is there a good starting point available? Things I've found and considered I initially thought that txt2tags would be helpful, but although it can write both markdown and Dokuwiki, it is very tied to its own specific input format I've also seen Markdown2Dokuwiki, and although I'd certainly be willing to use a sed script, even on a PC, this only supports a tiny, tiny part of Markdown's syntax. python-markdown2 also sounded promising, but it only writes out HTML. pandoc - but it doesn't support Dokuwiki output MultiMarkdown - does not appear to support Dokuwiki output

    Read the article

  • smartctl short test doesn't seem to complete

    - by Cédric COPY
    I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

    Read the article

  • USPTO site asks for Quicktime Plug-in which I already have installed. Why?

    - by Kensai
    Whenever I try to watch the images of a patent in the USPTO site (example) using Firefox, the browser asks me to download the latest Quicktime, manually. This is totally strange because I already HAVE the latest plug-in (it even appears on my Firefox add-ons list). In the past I have only been able to see patent images using Safari. But never with Firefox. Is it a USPTO problem or a Mozilla one? Is there a way to fix the problem? edit: I can't see TIFF images neither with Internet Explorer (both 32-bit and 64-bit versions) nor with Chrome. All these browsers don't know how to open embedded TIFF images because they don't recognize the installed Quicktime plugin. A USPTO conspiracy to promote Safari? Come to think of it, I had this problem in my old computer as well. It had a 32-bit Vista OS, now I have 64-bit Windows 7. I hate TIFF and can't find Mozilla-specific information anywhere.. Arghh, am I the only one here with this freak problem?!

    Read the article

  • Setting the default permissions for files uploaded via FTP to a directory

    - by Kerri
    Disclaimer: I'm just a web designer/coder, and server admin stuff is my weakest point of them all. So be easy on me (and very specific). I'm using a simple CMS (Unify) on a site, where part of the functionality is that the client can upload files to a specified directory (using FTP). The permissions for the upload directory are set to 755. But when files are uploaded through the interface, they are uploaded with permissions set to 640 (instead of 644), so site visitors cannot acces the files. When I emailed the CMS's support about this, they told me that it was a server setting, and I need to make sure that files uploaded through FTP are set to 644. Makes perfect sense, but I have no idea how to do this. Any help would be greatly appreciated. This site is a shared site hosted by Network Solutions (Unix), so my access options are limited. I can edit .htaccess files, and php.ini, but that's about all I have access to. It appears I can't even log on via shell. ETA: 11/11/2010 Thanks all. I was able to work around this problem by setting up the CMS's settings in a different way. I'd be interested in following up on Nick O'Niel's suggestions, because I think he's on the right track, but unfortunately I can't access the necessary files on this particular server. So, anyway, I'm leaving this open, since the original questions isn't exactly resolved. Unfortunately, I probably can't put a correct answer to the test, since the shared server in question has nearly all of its config files tightly locked down.

    Read the article

  • Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

    - by WerkkreW
    Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

    Read the article

  • NIC reordering on RHEL5/CentOS 5

    - by ewwhite
    I have an HP ProLiant DL360 G6 containing two onboard NICs as well as an HP NC375T (NetXen NX3031 chipset) 4-port PCIe card. The system was running with eth0 and eth1 belonging to the onboard NICs and eth2-eth5 on the NetXen card. I recently rebuilt the server and from the kickstart process onward, the NICs were reordered such that the onboard NICs became eth4 and eth5, while the NetXen card took over eth0-eth3. I've had some experiences in the past where I tied NICs to specific interfaces via changes in the ifcfg-ethX config files, but this is the first time I've ever seen an add-in card take over eth0 from the motherboard's interfaces. This impacted my kickstart scripts, so: 1). How can I ensure that the onboard NICs take precedence in the kickstart arrangement. 2). What is the most consistent way to maintain that ordering through repeated reboots, kernel changes (e.g. going from a RHEL mainline kernel to a RHEL MRG realtime kernel), etc. 3). What is the interaction between the /etc/modprobe.conf module/NIC definitions, the /etc/sysconfig/network-scripts/ifcfg-ethX and the /etc/modprobe.d/blacklist functions in this context?

    Read the article

  • tab complete not working for vim in particular directory - ubuntu 12.04

    - by user1160958
    I am working on a ruby on rails app. All of the sudden the command line tab complete stopped working for vim, only for files though, and only for the vim command (i.e. works for other commands, ls, rm etc.) After further investigation - this only occurs in a specific directory, the home directory of my rails app. If I go into a sub directory in my rails app, or any other directory on my machine, the tab complete works again. If I go into the root directory of any other rails app, it works. I also tried renaming the diretory, and copying the contents of the directory to another directory, and that did not work either. It only does not work for files, and works for any other command - ls, rm etc. But when I do vim /path/to/file/, then tab to see a list of files in that directory, only other directories show, not files. I am using ubuntu 12.04. Also, I tried re-installing vim, re-booting, removing ~/.viminfo (there was no vimrc file) that didn't work. Any help would be appreciated!

    Read the article

  • OpenLDAP ACLs are not working

    - by Dr I
    First things first, I'm currently working with an OpenLDAP: slapd 2.4.36 on a Fedora release 19 (Schrödinger’s Cat). I've just install the openldap with yum and my configuration is the following one: ##### OpenLDAP Default configuration ##### # ##### OpenLDAP CORE CONFIGURATION ##### include /etc/openldap/schema/core.schema include /etc/openldap/schema/cosine.schema include /etc/openldap/schema/inetorgperson.schema include /etc/openldap/schema/nis.schema pidfile /var/lib/ldap/slapd.pid loglevel trace ##### Default Schema ##### database mdb directory /var/lib/ldap/ maxsize 1073741824 suffix "dc=domain,dc=tld" rootdn "cn=root,dc=domain,dc=tld" rootpw {SSHA}SECRETP@SSWORD ##### Default ACL ##### access to attrs=userpassword by self write by group.exact="cn=administrators,ou=builtin,ou=groups,dc=domain,dc=tld" write by anonymous auth by * none I launch my OpenLDAP service using: /usr/sbin/slapd -u ldap -h ldapi:/// ldap:/// -f /etc/openldap/slapd.conf As you can see it's a pretty simple ACL which aim to allow access to the userPassword attribute to a specific group read only, then to the owner read and write to anonymous requiring auth and refuse the access to everyone else. The problem is: Even using a valid user with correct password my ldapsearch ends with zero informations retrieved from the directory, plus I've got a strange response on the result line. # search result search: 2 result: 32 No such object # numResponses: 1 here is the ldapsearch request: ldapsearch -H ldap.domain.tld -W -b dc=domain,dc=tld -s sub -D cn=user,ou=service,ou=employees,ou=users,dc=domain,dc=tld I did not specify any filter as I want to check that ldapsearch is correctly printing only allowed attribute.

    Read the article

  • Disconnect from PHP after output generated

    - by Oli
    I have a LEMP stack. Nginx sitting in front of PHP-FPM. Because some of the sites are heavy and there's OPCode caching, PHP is set up so that there are only 5 child processes running. The aim being that each child can deal with any request in less than half-a-second and then move onto the next request. One problem I've found is that if it's a big chunk of HTML that's getting sent out, and the user has a slow connection, that PHP thread stays occupied until they've finished downloading. Because of my current setup, I have a pretty unforgiving timeout inside PHP where the script is killed after 20 seconds. This is to make sure everybody gets a turn but on a slow connection, this can mean the user gets cut off with a 504 Gateway timeout. I was wondering if there was some sort of buffer solution that I could implement within or just behind Nginx that sent the request through and then... well... buffered the content into its own cache and feed that onto the client as and when they could download it. The aim being that the underlying PHP thread can be freed up. What I'm asking for doesn't have to be PHP-specific. Anything that deals with FastCGI, or even any Nginx-upstream might have a similar issue to this.

    Read the article

  • Is there a screen sharing/remote desktop app for mac that lets you use a different host screen resolution?

    - by MarqueIV
    Ok, there are tons and tons of questions about remote desktop for mac and they're all being closed as duplicates. I however am specifically looking for one that will let me use a different resolution than the host, the way you can with Remote Desktop for Windows. For instance, when I connect to my 11" Macbook Air booted into Windows7 from my quad-screen desktop, also booted into Win7 using Microsoft's Remote Desktop Client, it blanks out the screen on the notebook, then virtualizes the video across all four of my desktop's monitors at their native resolutions (2560x1600, 2 x 1920x1200 and 1600x1200) and the notebook now acts as if it has four physical monitors connected to it. All of this from a notebook that only has a 1366 x 768 native resolution. Even when running OS X on the client running RDC, while it doesn't support multi-monitors like its Win counterpart, it still lets me run at the native resolution of the client screen of 2560x1600. Again, it just blanks out the host screen while doing so. However when using Mac's screen sharing, since that is just glorified VNC, it just mirrors what's already on the host's screen, meaning it will always be a single screen with the resolution of 1366x768. This of course makes sense since VNC is a mirroring solution, not a video-virtualizing one like RDC, but it means that on my quad-monitor setup, the remote window isn't even large enough to fill up a single monitor, let alone four (unless you have a client that can scale it up, but that's video scaling. It's still only 1366x768.) So what I'm looking for is if there is a solution on the Mac that lets me do the same thing as RDC in a Win environment. Don't care if I have to pay. I'd gladly pay several hundred dollars for this. I just need that specific feature. Note: People have suggested various VNC clients, but the VNC host still runs at 1366x768 so that will not work here. Ever. Also, people have suggested Synergy/Synergy+/Teleport and such which share the keyboard and mouse, not video. Completely different animal unrelated to what I'm looking for.

    Read the article

  • One server with multiple desktops "heads" with VNC

    - by Alexis K
    I am managing a system of kiosks. Each kiosk currently is running a web browser with the application for the kiosk running in the browser. Each kiosk needs to be able to display separate content. At times, the application running in the web browser freezes. Thus, I have to go out to the site to refresh the page. I want to see if there is a way to have one central server that has multiple browser heads. Then each kiosk would run a program like VNC to display one of the heads. This way when the program freezes, I just have to login to the central server and refresh the page. Getting VNC or another remote desktop software installed on the clients is no problem. What I am looking for is a way to have VNC remote into a specific head of a head of a web browser. Does such a thing exist? Or do I have to run a VM for each kiosk to remote into? Any advice, pointers, or solutions would be helpful.

    Read the article

  • Software/hardware to build video streaming server?

    - by Sasha Yanovets
    I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

    Read the article

  • Suddenly can't send E-Mails with Apple Mail to Gmail SMTP

    - by slhck
    Hi all, I have a weird problem that started just today. I am using Apple Mail on a Leopard machine, connecting to Gmail. Fetching e-mail works just fine. My SMTP settings are also correct. Still, I can't send mail, it will display a pop up saying that "transferring the content to the mail server" failed (translation from German, could be different in English OS X versions). I have verified the following: My SMTP settings are definitely correct. I have not changed them and the issue appeared today. Also, I went through the Apple online configuration for Gmail accounts and did not have to adjust any setting. I can run network diagnosis and it will connect to both POP and SMTP servers without a problem (all green lights) The Telnet details will show me the HELO message from the Gmail servers, so there's no authentication failure. Console.app will not show any messages related to "mail" when I try to send the mail, so there's no specific error message The mail I'm trying to send does not have an attachment, it is plaintext only I can login to gmail.com and send mails without a problem The recipient address exists and contains no syntax errors I can also not send mails to myself When using another IP and ISP (through VPN), it still doesn't work As for my settings: I connect to smtp.gmail.com and for advanced settings I choose password-based authentication with user: [email protected] and my password. I let Apple Mail try the default ports (for SSL and TLS, respectively). Again: I have not changed a thing between yesterday and today. What is causing that strange behavior? Any help would be much appreciated.

    Read the article

  • Why does my exchange message filtering rule not work?

    - by Jon Cage
    I have two rules set up to sort incoming bug reports. The first is specific to a single device: Apply this rule after the message arrives sent to SMS Distribution and with <source_device_number>: in the body move it to the BugReports\<source_device_number> folder ..and the second is a catch-all for everything else: Apply this rule after the message arrives sent to SMS Distribution move it to the BugReports folder For some reason though, the first rule never seems to act even though it's higher in the list. So for some reason an email like the following doesn't seem to get caught by the first rule: From: <SourceDeviceUID> To: SMS Distributor Subject: Message from <SourceDeviceUID> Message: <source_device_number>: Device encountered a problem. Details below... ...where <source_device_number> is an integer. The second rule works fine. But for some high-priority devices, I want them automatically sorted. Why might that first rule fail?

    Read the article

  • maximum number of connections Squid

    - by Isaac
    I have a Squid proxy server that controls all internet traffic for my network. I need a way to stop users from downloading big files (say 50MB) in my network. I banned some famous ports (e.g. torrent) but some downloads are possible by HTTP port. Obviously I cannot ban port 80! A simple solution is limiting maxmimum number of the simultaneous connections for each IP (e.g. 3 connections). It's possible in Squid with this config: acl ACCOUNTSDEPT 192.168.5.0/24 acl limitusercon maxconn 3 http_access deny ACCOUNTSDEPT limitusercon But this solution has really bad impact in web browsing, because any smart browser get different parts of a website by several connections simultaneously to speedup web browsing. But if we have a maximum number of connections, the browsers will fail to get some parts and the website will be shown partially and some parts/images/frames will not be shown. So, can we limit maximum number of persist connections? I think this policy will works: Specify Maximum number of connections that is alive for 10 seconds But Number of simultaneous connections for every IP is unlimited But how can we implement this policy when Squid? With which config? UPDATE: artifex and Tom Newton offered using a bandwidth-limiting approach to fight against downloaders. But bandwidth-limiting in Squid has a shortcoming: It's static and cannot dynamically change. So a person has a limited bandwidth not matter how many people are using internet (maybe nobody!) Also, this solution cannot help to stop people from downloading. They still can download but in a lower speed. But if we find a way to terminate persist connections (or any connection that is alive more than a specific time), downloading big files will be almost impossible (always there is some way!)

    Read the article

  • Routing table on Linux not respected

    - by MRHaarmann
    I have a very specific problem, building a Linux VPN endpoint (with external VPN Gateway), which should route certain networks over the tunnel, others via default gateway. The Linux VPN should do a NAT on the outgoing connections for the VPN peers. Setup is as following: Internet gateway LAN 192.168.25.1/24 VPN Gateway LAN 10.45.99.2/24 (VPN tunnel 10.45.99.1 to net 87.115.17.40/29, separate connection to Internet) Linux VPN Router eth0 192.168.25.71/24 eth0:503 10.45.99.1/24 Default 192.168.25.1 route to 87.115.17.40/29 via 10.45.99.2 (send_redirects disabled, ip_forward enabled) Linux clients (multiple): eth0 192.168.25.x/24 Default 192.168.25.1 route to 87.115.17.40/29 via 192.168.25.71 Ping to the machines via tunnel from the VPN Router is working. Now I want to establish a routing from my clients over the VPN gateway and the client packet gets routed to 192.168.25.1 ! traceroute output shows the packets get routed to 192.168.25.71, but then to 192.168.25.1. So the route is not respected in forward ! IPTables and Routing: ip route show 87.115.17.40/29 via 10.45.99.2 dev eth0 10.45.99.0/24 dev eth0 proto kernel scope link src 10.45.99.1 192.168.25.0/24 dev eth0 proto kernel scope link src 192.168.25.71 default via 192.168.25.1 dev eth0 iptables -A INPUT -i eth0:503 -j REJECT iptables -t nat -A POSTROUTING -o eth0:503 -j MASQUERADE iptables -A FORWARD -i eth0:503 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 192.168.25.0/24 -o eth0:503 -j ACCEPT So what is wrong with my setup ? The route is chosen correctly from localhost, but all the clients get forwarded to the Internet GW. thanks for helping, Marcus

    Read the article

  • SNMP Access on Ubuntu

    - by javano
    I am trying to use SNMP to monitor a machine locally on its self and remotely. This is the snmpd.conf (Ubuntu 8.04.1): # sec.name source comunity com2sec readonly 1.2.3.4 nicenandtight com2sec readonly 5.6.7.8 reallysafe group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly view all included .1 view system included .iso.org.dod.internet.mgmt.mib-2.system access MyROGroup "" any noauth exact all none none syslocation my house syscontact me <[email protected]> exec .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro smuxpeer .1.3.6.1.4.1.674.10892.1 includeAllDisks 95% 1.2.3.4 is the local machines IP and everything is working locally. 5.6.7.8 is the remote machine and initially I am just trying to touch SNMPD with snmpwalk from the remote machine; snmpwalk -v 2c -c reallysafe 1.2.3.4 Timeout: No Response from 1.2.3.4 I have added to iptables as the very first rule; -A INPUT -p udp -m udp --dport 161 -j ACCEPT With such a loose iptables rule I can't see why I can't even touch the SNMPD on that Uubuntu Machine. There are more specific rules further down the table but as I couldn't connect I added the above. TCPDump shows the UDP packets coming in. What could be going wrong here?

    Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >