Search Results

Search found 20208 results on 809 pages for 'window mobile'.

Page 586/809 | < Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >

  • UNESCO, J-ISIS, and the JavaFX 2.2 WebView

    - by Geertjan
    J-ISIS, which is the newly developed Java version of the UNESCO generalized information storage and retrieval system for bibliographic information, continues to be under heavy development and code refactoring in its open source repository. Read more about J-ISIS and its NetBeans Platform basis here. Soon a new version will be available for testing and it would be cool to see the application in action at that time. Currently, it looks as follows, though note that the menu bar is under development and many menus you see there will be replaced or removed soon: About one aspect of the application, the browser, which you can see above, Jean-Claude Dauphin, its project lead, wrote me the following: The DJ-Native Swing JWebBrowser has been a nice solution for getting a Java Web Browser for most popular platforms. But the Java integration has always produced from time to time some strange behavior (like losing the focus on the other components after clicking on the Browser window, overlapping of windows, etc.), most probably because of mixing heavyweight and lightweight components and also because of our incompetency in solving the issues. Thus, recently we changed for the JavaFX 2.2 WebWiew. The integration with Java is fine and we have got rid of all the DJ-Native Swing problems. However, we have lost some features which were given for free with the native browsers such as downloading resources in different formats and opening them in the right application. This is a pretty cool step forward, i.e., the JavaFX integration. It also confirms for me something I've heard other people saying too: the JavaFX WebView component is a perfect low threshold entry point for Swing developers feeling their way into the world of JavaFX.

    Read the article

  • VLC 2.0: can't enable UPnP support

    - by Craig
    I'm attempting to use VLC 2.0.1 (Intel 64 bit) to connect to a UPnP server (Serviio 0.6.2 on OS X Snow Leopard). I've tried to enable the feature by right clicking the "Universal Plug 'n Play" node in the LOCAL NETWORK section of the Main Window. While I am able to select 'Enable', the setting doesn't seem to 'stick'. Moreover, UPnP isn't listed in the Playlist Service discovery section of the preferences. The 'Service discovery modules' is currently set to upnp_intel:sap. I am able to connect to the UPnP server with my Samsung TV, so I know that the service works.

    Read the article

  • Routing and Remote Access Port Mapping not applied to localhost

    - by Computer Guru
    Hi, I've set up Routing and Remote Access (Windows Server 2003) to forward publicip:80 to a server on the private internal network, and that's working great. Incoming requests from the internet to port 80 are correctly forwarded to our internal web server and everything is fine. However, requests on the server itself are not being forwarded. That is, if I open a console window and type "telnet publicip 80" from the server on publicip, the request is not forwarded to the private server. I understand that in RRAS I've mapped port 80 on the public interface to the private server and that's why it's not working; but I don't know how to configure it so that requests from the local PC are also forwarded to the private server. I'd appreciate any help or feedback on the matter. Thanks!

    Read the article

  • Changing the passphrase of a private key in Windows

    - by janos
    I have a private key in Windows, created by puttygen.exe. I used default options to save it, the tool automatically gave it a .ppk extension, and it looks like this: PuTTY-User-Key-File-2: ssh-rsa Encryption: none Comment: rsa-key-20130627 Public-Lines: 4 AAAAB3NzaC1yc2EAAAABJQAAAIBnvvAhyMs4rdlQd4OdajDw4jIPi6vIjrWjt4l4 5C3wHOSxyQQdtSA8XT3K0rSBnNtZRJTb5mfix67qQe3pHCTMSNsYIaBi8xQJHZRa RxdY+1VtGnSlEma8KO2We9eDNCGiwrRTUzqvTiGCnzU0pF1MXxu3ObISJcpqv+sQ 1GB0cw== Private-Lines: 8 AAAA.......... Private-MAC: XXXXXXXXX Now I need to change the passphrase, and reading from the docs it seemed simple enough: puttygen.exe -P key.ppk But this pops up a window with this error: PuTTYgen Error: Couldn't load private key (unable to open file) I also tried to change the passphrase using ssh-keygen that comes with Git Bash: ssh-keygen.exe -p -f key.ppk It asks for my old passphrase, but then it gives me the error Bad passphrase. Which is not true, because I can add the key in pageant.exe, and I am not mistyping the passphrase... Anything else I can try to change or drop the passphrase?

    Read the article

  • Is there software that lets me drag windows between two PCs? (there is!)

    - by Jonathan
    I'm looking for a preferably free program that is similar to MaxiVista, which lets you extend you desktop to another desktops screen on the same network. But with MaxiVista you have to extend the entire screen. I'd like to just drag one window onto the other computers screen without extending the desktop. So on top of the other computer's windows. Kind of like a cross between MaxiVista and Windows 7' XP mode where you can run XP programs on the windows 7 desktop. EDIT: I am pleased to announce this is possible, though the windows is poor quality (8-bit color) but I believe thats just because MetaVNC isn't very up to date.

    Read the article

  • What's wrong with my MAC address?

    - by Shaul
    I have a D-Link DSL-2650U router, and exactly one computer on the network. For reasons of port forwarding I want to give my computer a static internal IP address, so that I don't take the chance of losing my NAT settings every time the computer reboots. So here's a screen shot that summarizes the entire problem: WTH is wrong with my MAC address? It's copied and pasted from the command prompt window! I tried editing out the dashes, but it still doesn't work. Am I doing something wrong, or is there a bug in the D-Link firmware?

    Read the article

  • Ubuntu 12.04 blank screen after login

    - by kgthenerd
    I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

    Read the article

  • Script errors when run by launchd at startup, but not when run in Terminal

    - by Mechcozmo
    I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

    Read the article

  • How can I keep gnu screen from becoming unresponsive after losing my SSH connection?

    - by Mikey
    I use a VPN tunnel to connect to my work network and then SSH to connect to my work PC running cygwin. Once logged in I can attach to a screen session and everything works great. Now, after a while, I walk away from my computer and sooner or later, the VPN tunnel times out. The SSH connection on each end eventually times out and then I eventually come back to my computer to do some work. Theoretically, this should be a simple matter of just restarting the VPN, reconnecting via SSH, and then running "screen -r -d". However apparently when the sshd daemon times out on the cygwin PC, it leaves the screen session in some kind of hung state. I can reproduce a similar hung state by clicking the close box on a cygwin bash shell window while it's running a screen session. Is there any way to get the screen session to recover once this has happened, so that I don't lose anything?

    Read the article

  • Unable to connect guest using VMWare Player

    - by eLAN
    I'm running RedHat server 5.3 as guest on Window XP VMware palyer. the network setting is set to "Host Only", but I have tries all other settings. I'm able to ping the guest machine, but I'm unable to connect it in any other way including webserver, Tomcat, Telnet, ssh. all of the services above are working from within the guest (using localhost). Guest firewall and SELinux are disabled. any idea on what I should check next? every idea will be appreciated... thnaks Ilan

    Read the article

  • What is the simplest and fastest way to transfer large file through a Windows network?

    - by Sake
    I have a Window Server 2000 machine running MS SQL Server that stores over 20GB of data. The database is backed-up every day to the second harddrive. I want to transfer those backup files to another computer to build another test server and for recovery practicing. (the backup never actually got restored for almost 5 years. Don't tell my boss about that!) I have trouble transfering that huge file through the network. I've tried plain network copy, apache download, and ftp. Any method I tried end up failing when the amount of data transfered reach 2GB. The last time that I successfully transfered the file, it was through a usb attached external harddrive. But I want to perform this task routinely and preferably automatically. Wonder what is the most pragmatic approach for this situation ?

    Read the article

  • Call for Papers for both Devoxx UK and France now open!

    - by Yolande
    Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} The two conferences are taking place the last week of March 2013 with London on March 26th and 27 and Paris on March 28th and 29th. Oracle fully supports "Devoxx UK" and "Devoxx France" as a European Platinum Partner. Submit proposals and participate in both conferences since they are a two-hour train ride away from one another. The Devoxx conferences are designed “for developers by developers.” The conference committees are looking for speakers who are passionate developers unafraid to share their knowledge of Java, mobile, web and beyond. The sessions are about frameworks, tools and development with in-depth conference sessions, short practical quickies, and bird-of-a-feather discussions. Those different formats allow speakers to choose the best way to present their topics and can be mentioned during the submission process Devoxx has proven its success under Stephan Janssen, organizer of Devoxx in Belgium for the past 11 years. Devoxx has been the biggest Java conference in Europe for many years. To organize those local conferences, Stephan has enrolled the top community leaders in the UK and France. Ben Evans and Martijn Verberg are the leaders of London Java User Group (JUG) and are also known internationally for starting the Adopt-a-JSR program. Antonio Goncalves is the leader of the Paris JUG. He organized last year’s Devoxx France, which was a big success with twice the size first expected. The organizers made sure to add the local character to the conferences. "The community energy has to feel right," said Ben Evans and for that he picked an "old Victoria hall" for the venue. Those leaders are part of very dynamic Java communities in France and in the UK. France has 22 JUGs; the Paris JUG alone has 2,000 members. The UK has over 50,000 developers working in London and its surroundings; a lot of them are Java developers working in the financial industry. The conference fee is kept as low as possible to encourage those developers to attend. Devoxx promises to be crowded and sold out in advance. Make sure to submit your talks to both Devoxx UK and France before January 31st, 2013. 

    Read the article

  • How to make addin visible on toolbar by script or batch process?

    - by David.Chu.ca
    I have an addin for Excel 2003. I tried to use MSDN's vbs script to make it installed, see my previous post question. It seems working as addin, but it does not displayed on toolbar when it is first installed on a box. What I have to do is to go to Tools-Add-Ins.. to uncheck my addin, for example myAddin, and then go back to the same dialog window again to check it. I think there must be somewhere Excel has config settings in xml or registry? Any way to run a script to set this addin visible in toolbar?

    Read the article

  • How can I get ssh-agent working over ssh and in tmux (on OS X)?

    - by Rich
    I have a private key set up for my github account, the passphrase to which is, I believe, stored in OS X's keychain. I certainly don't have to type it in when I open a terminal window and enter ssh [email protected]. However, when I'm running bash over an ssh session, or locally inside a tmux session, I have to type in the passphrase every single time I attempt to ssh to github. This question suggests that a similar problem exists with screen, but I don't really understand the issue well enough to fix it in tmux. There's also this page which includes a fairly complicated solution, but for zsh. EDIT: In response to @Mikel's answer, from a local terminal I get the following output: [~] $ echo $SSH_AUTH_SOCK /tmp/launch-S4HBD6/Listeners [~] $ ssh-add -l 2048 [my key fingerprint] /Users/richie/.ssh/id_rsa (RSA) [~] $ typeset -p SSH_AUTH_SOCK declare -x SSH_AUTH_SOCK="/tmp/launch-S4HBD6/Listeners" Whereas over ssh or in tmux I get: [~] $ echo $SSH_AUTH_SOCK [~] $ ssh-add -l Could not open a connection to your authentication agent. [~] $ typeset -p SSH_AUTH_SOCK bash: typeset: SSH_AUTH_SOCK: not found echo $SSH_AGENT_PID returns nothing whatever shell I run it from.

    Read the article

  • Missing disk space in Windows XP

    - by Jørn Schou-Rode
    On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

    Read the article

  • Monitoring Baseline

    - by Grant Fritchey
    Knowing what's happening on your servers is important, that's monitoring. Knowing what happened on your server is establishing a baseline. You need to do both. I really enjoyed this blog post by Ted Krueger (blog|twitter). It's not enough to know what happened in the last hour or yesterday, you need to compare today to last week, especially if you released software this weekend. You need to compare today to 30 days ago in order to begin to establish future projections. How your data has changed over 30 days is a great indicator how it's going to change for the next 30. No, it's not perfect, but predicting the future is not exactly a science, just ask your local weatherman. Red Gate's SQL Monitor can show you the last week, the last 30 days, the last year, or all data you've collected (if you choose to keep a year's worth of data or more, please have PLENTY of storage standing by). You have a lot of choice and control here over how much data you store. Here's the configuration window showing how you can set this up: This is for version 2.3 of SQL Monitor, so if you're running an older version, you might want to update. The key point is, a baseline simply represents a moment in time in your server. The ability to compare now to then is what you're looking for in order to really have a useful baseline as Ted lays out so well in his post.

    Read the article

  • Ctrl W s not splitting windows in vim

    - by rajan sthapit
    I am trying to use Ctrl+ws to split a window in vim. However it is not working in my case. I opened a file using vim filename. Then I pressed Ctrl+ws. But as soon as I press just Ctrl+w it clears the viewport and I could see my shell display before vim opened the file. I mean the view port is replaced by the content just before the file was opened. However, I am still editing the file with vim. Suggestions?

    Read the article

  • How to change fonts in Kod?

    - by the_great_monkey
    I started using this new text editor called Kod (runs on Mac OS 10.6): http://kodapp.com/ It's very very fast, I'm a poor programmer and I don't have money to pay for TextMate, this might be the closest to TextMate that I've used. (TextMate cost around $50). The problem is.... Where is the preferences window? Where can I set the font size? I need to make it bigger, that's it... Does anyone know how to do that? EDIT: I think they haven't implement them yet... From their discussion in google group.

    Read the article

  • How to make fonts smooth and readable in Debian/Ubuntu?

    - by jmdeldin
    What is the best, most foolproof way of getting nice font rendering in Linux? Currently, I am experiencing thin, ugly fonts (shown below). I have wasted too much time tweaking fonts.conf, and I have yet to find a decent combination. I am running Debian 6.0 with no desktop environment (just Openbox for a window manager) in a VM on a Macbook Pro (OS X 10.7.4). Screenshots The following screenshots were taken without fonts.conf and .Xdefaults tweaks. running in "native" Openbox environment: http://i.imgur.com/10bnH.png running over X11, which looks a little worse than Openbox: http://i.imgur.com/sq8jk.png Thank you!

    Read the article

  • Webcam microphone input in Gnome/pulseaudio

    - by sdaau
    Just got a "Trust" webcam, which gets recognized on my Ubuntu Lucid. It has a built in microphone - which also gets recognized - however, I cannot really get it to act as the system microphone input? Here are some screenshots of what is shown by gnome-volume-control: The default window shows Trust webcam - which has two profiles: "Analog Mono Input" and "Off" - of course, I have it on "Analog Mono Input": However, on the "Input" tab - there is no matching "device for sound input" - neither a matching connector: Then I installed pavucontrol - but that doesn't show that much more; it tells first that gnome-volume-control reads from "Internal Audio Analog Stereo": Then in "Input devices" tab, there is again nothing resembling the mic input from webcam: Finally, under "Configuration" tab, the "Trust" webcam shows, but even if its profile is on "Analog Mono Input", nothing much happens:   So, does anyone know how I could get this webcam microphone to be recognized as the system input? Many thanks in advance for any answers, Cheers!

    Read the article

  • XPath & XML EDI B2B

    - by PearlFactory
    GoodToGo :) Best XML Editor is Altova XMLSpy 2011 http://www.torrenthound.com/hash/bfdbf55baa4ca6f8e93464c9a42cbd66450bb950/torrent-info/Altova-XMLSpy-Enterprise-Edition-SP1-2011-v13-0-1-0-h33t-com-Full For whatever reason Piratebay has trojans and other nasties..Search in torrent.eu for Altova XMLSpy Enterprise Edition SP1 2011 v13.0.1.0 Also if you like the product purchase it in a Commercial Enviroment Any well structured/complex XML can be parsed @ the speed of light using XPATH querys and not the C# objects XPathNodeIterator and others etc ....Never do loops  or Genirics or whatever highlevel language technology. Use the power of XPATH i.e Will use a Simple (Do while) as an example. We could have many different techs all achieveing the same result Instead of   xmlNI2 = xmlNav.Select("/p:BookShop")         if (xmlNI2.Count != 0)            {                                 while ((xmlNI2.MoveNext()))              string aNode =xmlNI2.SelectSingleNode('Book', nsmgr); if (aNode =="The Book I am after")       Console.WriteLine("Found My Book);   This lengthy cumbersome task can be achieved with a simple XPATH query Console.WriteLine((xmlNavg.SelectSingleNode("/p:BookShop/Book[.='The Book I am aFter ']", nsmgr)).Value.ToString()); Use the power of the parser and eliminate the middleman C#/MSIL/JIT etc etc Get Started Fast and use the parser as Outlined 1) Open XML and goto Grid Mode 2) Select XPATH tab on the bottom viewer/window as shown  From here you get intellisense and can quickly learn how to navigate/find the data using XPATH A key component to Navigation with XPATH is to use the "../ " command . This basically says from where I am now go up 1 level . With Xpath all commands are cumalative. i.e you can search for a book title @ the 2nd level of the XML and from there traverse 15 layers to paragraphs or words on a page with expression validation occuring throughout this process etc  (So in essence you may have arrived @ a node within the XML and have met 15 conditions along the way ) Given 1-2 days with XmlSpy and XPATH you unlock a technology that is super fast and simple to use. XML is a core component to what lays under the hood of so many techs. So it is no wonder that you want to be able to goto  the atomic level to achieve the result you want Justin P.S For a long time I saw XML as slow and a bit boring but now converted

    Read the article

  • Added resolution not working after upgrading to 12.04

    - by David
    After upgrading, my screen resolution (added by xrandr comands on the start) did not work like before. Messages appear showing some errors (that i have never had in 11.10). "No se pudo aplicar la configuración almacenada para los monitores"/"Can't apply the stored configuration for the monitors." This script didn't work either. xrandr --newmode "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync xrandr --addmode VGA1 1280x1024_60.00 xrandr --output VGA1 --mode 1280x1024_60.00 I also tryed deleting monitors.xml but, nothing. This only erase the window message. It's been sayd that ##It's a normal buggy and well know problem for Pc's with Intel integrated video cards.## The new version of gnome-settings-daemon stores its configuration information in dconf rather than gconf. I tryed something, but the problem persist. This is what i did. Install the dconf-tools package, and then run dconf-editor. In the tree on the left, navigate org - gnome - settings-daemon - plugins - xrandr. Uncheck the active checkbox. restart your XServer (Ctrl+Alt+Backspace) (It didn't worked out for me, but it may be helpful to someone)

    Read the article

  • How to choose which fields are available via LDAP from an Active Directory

    - by Felix Eve
    I'm using PHP to do an ldap search and then pull the attributes out using ldap_get_attributes. This returns an array of data (that can be seen here) however there are some fields that are missing such as Organization Title, department, company, address and telephone number. How to I make these fields available? There is a similar question here: http://www.petri.co.il/forums/showthread.php?t=15227 I've followed the steps outlined there an tried changing some access permissions but am not really sure what I'm doing and can't see any permissions that directly relate to the fields that I can see when I edit a user in the "Active Directory Users Computers" window. I am a PHP developer, not a Windows server administrator so am finding configuring an AD rather challenging so please don't assume any level of knowledge about AD. I've asked the same question on stack exchange but understand this is a more relevant place to ask.

    Read the article

  • Windows Phone 7 and WS-Trust

    - by Your DisplayName here!
    A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() {     var client = new WSTrustClient(         new WSTrustBindingUsernameMixed(),         new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"),         new UsernameCredentials(_txtUserName.Text, _txtPassword.Password));     return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) {     _client = GetWSTrustClient();       var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer)     {         AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/")     };       _client.IssueCompleted += client_IssueCompleted;     _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding>   <binding name="mixedNoSessionBearerBinary">     <security authenticationMode="IssuedTokenOverTransport"               messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10">       <issuedTokenParameters keyType="BearerKey" />     </security>     <binaryMessageEncoding />     <httpsTransport/>   </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) {     var binding = new CustomBinding(         new BinaryMessageEncodingBindingElement(),         new HttpsTransportBindingElement());       _proxy = new StarterServiceContractClient(         binding,         new EndpointAddress("…"));     using (var scope = new OperationContextScope(_proxy.InnerChannel))     {         OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR));         _proxy.GetClaimsAsync();     } } works. download

    Read the article

  • VMware Kernel Module Updater hangs on Ubuntu 13.04

    VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

    Read the article

< Previous Page | 582 583 584 585 586 587 588 589 590 591 592 593  | Next Page >