Search Results

Search found 89593 results on 3584 pages for 'another so user'.

Page 587/3584 | < Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >

• Encode real-time dvb-s stream using mencoder

  - by karatchov

  My satellite receiver can stream the mpeg-2 video/audio output through lan. Using mencoder, I'm trying to build a script to encode and save the stream in real time with my Core2Duo 1.8 Ghz. Right now, I'm using a single pass, it produces good quality for a video rate of 800Kb/s, but takes more then 95% of CPU power, thus making a lot of frameskips is the computer is used while encoding. mencoder -o -vf lavcdeint -oac mp3lame -lameopts abr:q=2:aq=2 -ovc x264 -ffourcc avc1 -x264encopts crf=25:me=hex:subq=9:frameref=2:nocabac:threads=auto -mc 3 So, I'm considering using a 2-pass encoding to alleviate the processor and record 100% of the stream. But I have no idea how to start. For the info: Standard Stream: mpeg-2 720*576 25fps HD Stream: 1920*1080 50fps (this is not my goal to record it, but it will be super cool if I could)

  Read the article

• Verification of files on backup media - after the backup

  - by Greg Sansom

  I have a system in place where I back up my work files daily to a portable hard drive. I actually have two portable hard drives - one is stored off-site and I swap them regularly. I also keep my family photos and other historical files backed up, but I only back the photos up occasionally (ie when I have new photos). The backup media is for backup only, and it is unlikely I will ever read the files from the backup media unless a disaster occurs and I lose the master. It worries me that my backed up files could become corrupt without me knowing it. It is also feasible that my master files could become corrupt, and eventually the corrupt files would be replicated to the backup media. I'm currently using Cobian Backup, but I'm open to alternatives. Is there a tool I can use to confirm that the backed up files are identical to the files that were first copied? I know it would be possible to generate a checksum and periodically validate the backup files against the original checksum, but I'm looking for a tool which will do this automatically.

  Read the article

• Adobe Reader unusably slow on Mac OS X 10.6.6

  - by vwegert

  We've got two Macs that are both running 10.6.6. On my MBP, Adobe (Acrobat) Reader started behaving weird a few weeks ago. It became very sluggish, started missing mouse clicks or mouse button releases, scrolling was next to impossible. Most of the time it does not handle Page Up / Page Down events at all. Zooming works erratically if at all. It's basically unusable. On the other Mac (an iMac), there are no such problems. I've tried to remove and reinstall Adobe Reader as well as upgrading to the latest version, but unfortunately without success. This is the only software that is behaving strangely on this Mac, everything else is working fine. What else could I try?

  Read the article

• ./rtnet start rteth0-mac: unknown interface: No such device ioctl: No such device

  - by Anisha Kaul

  I have installed the RTnet over Xenomai. RTnet compiled well, and I also tested loopback on the single machine and was able to ping. However I noticed ./rtnet start showing the following output: What should I interpret when all it says is "no such device"? What more info should I provide here for you to help me in getting rid of this error? linux-y3pi:/usr/local/rtnet/sbin # ./rtnet start rteth0: unknown interface: No such device rteth0-mac: unknown interface: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl (add): No such device vnic0: unknown interface: No such device SIOCSIFADDR: No such device vnic0: unknown interface: No such device SIOCSIFNETMASK: No such device Waiting for all slaves...ioctl: No such device ioctl: No such device linux-y3pi:/usr/local/rtnet/sbin # lsmod: linux-y3pi:/usr/local/rtnet/sbin # lsmod Module Size Used by tdma 18281 0 rtmac 9274 1 tdma rtcfg 49485 0 rtcap 7216 0 rt_loopback 1563 2 rtpacket 5517 0 rtudp 10655 0 rt_8139too 11374 0 rtipv4 22842 2 rtcfg,rtudp rtnet 42130 9 tdma,rtmac,rtcfg,rtcap,rt_loopback,rtpacket,rtudp,rt_8139too,rtipv4 ip6t_LOG 8480 6 xt_tcpudp 3540 2 xt_pkttype 1176 3 ipt_LOG 8201 6 xt_limit 2159 12 snd_pcm_oss 44878 0 snd_mixer_oss 15151 1 snd_pcm_oss snd_seq 55731 0 s nd_seq_device 6698 1 snd_seq edd 8407 0 ip6t_REJECT 4306 3 nf_conntrack_ipv6 8186 4 nf_defrag_ipv6 10128 1 nf_conntrack_ipv6 ip6table_raw 1451 1 xt_NOTRACK 1112 4 ipt_REJECT 2397 3 xt_state 1314 8 iptable_raw 1478 1 iptable_filter 1706 1 ip6table_mangle 1756 0 nf_conntrack_netbios_ns 1678 0 nf_conntrack_ipv4 8957 4 nf_conntrack 80411 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4 nf_defrag_ipv4 1561 1 nf_conntrack_ipv4 ip_tables 18872 2 iptable_raw,iptable_filter ip6table_filter 1679 1 ip6_tables 19066 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter x_tables 24094 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables fuse 69279 3 loop 17417 0 dm_mod 71671 0 snd_hda_codec_via 57768 1 snd_hda_intel 24871 2 snd_hda_codec 95006 2 snd_hda_codec_via,snd_hda_intel snd_hwdep 6540 1 snd_hda_codec snd_pcm 90716 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 22050 2 snd_seq,snd_pcm snd 71410 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7854 1 snd iTCO_wdt 11716 0 iTCO_vendor_support 2942 1 iTCO_wdt snd_page_alloc 8324 2 snd_hda_intel,snd_pcm sr_mod 13186 0 cdrom 37628 1 sr_mod i2c_i801 9677 0 pcspkr 1950 0 sg 28847 0 serio_raw 4534 0 ext4 361361 2 jbd2 82943 1 ext4 crc16 1699 1 ext4 i915 500199 2 drm_kms_helper 33537 1 i915 drm 211193 3 i915,drm_kms_helper sd_mod 33977 5 i2c_algo_bit 5625 1 i915 intel_agp 11529 1 i915 intel_gtt 16397 3 i915,intel_agp ata_generic 3787 0 ata_piix 22875 4 ahci 20097 0 libahci 22089 1 ahci libata 194812 4 ata_generic,ata_piix,ahci,libahci scsi_mod 204709 4 sr_mod,sg,sd_mod,libata linux-y3pi:/usr/local/rtnet/sbin #

  Read the article

• 8051 MCU debug board function

  - by b-gen-jack-o-neill

  Hi, in school I have written many programs for 8051 compatible CPU. But I never actually knew how our "debug" sets worked. I mean, we test our programs in special sets, which actually allow you to very simply load program to CPU via PC serial port. But I thing you know this musch more better than I. But how it works? I mean, I know there is chip which adjusts signal level from PC serial port to TTL logic, and than connected to serial line of 8051. But thats all I know. Actually even my teacher doesen´t know how it works, since school bought it all. So, I suspect there is some program already running in the 8051 which handles communication and stores your program into memory, am I right? But, how can you make 8051 to process instructions from different location than ROM? Becouse if I am right, you cannot write into ROM memory by any instruction, as well as 8051 can only read instructions from ROM?

  Read the article

• linux passwords in configuration files

  - by user33124

  Some programs on linux that use configuration files, want me to enter my password in plain text in one of their configuration files. For example newsbeauter, the rss reader wants me to enter my google account password in a ~/.newsbeauter/config if I want to read google reader feeds. Mutt also sort of wants a password in a text file, but gives an option of entering it on every login. Is there any secure workaround to storing a password in a config file like that (eg for newsbeauter)? I was thinking of running the app as root, but that doesn't seem right. Or somehow creating and deleting the file everytime I use the app. Any ideas?

  Read the article

• LAN messenger for Windows with features like Google Talk

  - by Mahin

  Currently we are using Google Talk as messenger at our work place. Now we are supposed to replace it with some LAN based messenger. It should have at least following features chatting ( if logs are stored some where than it is good ), File sharing. Thanks.

  Read the article

• Tools to (privately) annotate/markup a website for maintenance

  - by rob

  I've been tasked with updating a website. Rather than proofreading and updating each page (one at a time), I want to make a single pass over the entire website, marking graphics/images/videos that need to be rewritten, removed, or updated. I thought about taking screenshots, marking those up, and putting them in our bug-tracking database, but that seems like an extremely tedious solution. Some of the content is similar on various pages across the website, and the entire site itself is localized into several languages (so any changes made to the English version will have corresponding changes for other languages). I also want all of my markup to remain private (that is, if it's stored online somewhere, I should be the only person who can see my comments). I found an article that lists several website annotation services, but it's not clear whether they allow private annotations, or whether these tools are even appropriate for website maintenance (many of them look more geared toward social networking). I've started making a list of some necessary and desired features below, and may add more as necessary. Annotations/markup/comments remain private (only visible to me) Comment history/tagging (so I can reuse the same comment for shared footers, items requiring similar updates, etc.) Ability to print/export a list or report of all comments for the entire website Ability to produce a categorized list of changes (e.g., to produce a list of images that need updating, which I can send to the graphic designer) What processes and tools do you use to keep track of all the changes that need to be made to a website? What features are painfully absent from the tools you use?

  Read the article

• Wireless Bridge with NetGear and TP-Link

  - by Tiago Cruz

  I have a wireless NetGear WGR614 v7 (little old) router connected to the internet, but I can't get a good signal in the other end of my house. I have another new one, model TP-Link TL-WR941ND wireless router. I was able to do the stuff works using a wired cable, but now, I would like to do the same using wireless connections (bridge mode, some like WDS?) Now, the computer connected to TP LINK was able to ping my computer connected to NETGEAR, but we cannot go IP ADDRESS outside my network, only internals ones. What can I do to configure this? Is needed that BOTH wireless routers support BRIDGE mode or only one its good enough? Thanks a lot!!

  Read the article

• RAID 0 performance gains?

  - by NickAldwin

  I'm building a new computer over the summer. I'm fairly competent in computer hardware, and am thus building the computer from scratch. I have everything planned out, but I was wondering about RAID. I asked which RAID I should use earlier, but now that it's pretty clear that RAID 1 isn't really that great, I think I'll go with cloud-backup instead of disk-redundancy. However, I still face a choice: use two 1TB drives as two 1TB drives, or combine them into a RAID 0 striped array. Is there any performance gain at all? I know that if one drive dies, everything is gone, so is the performance gain worth it? I'm building a pretty advanced computer, with SLI video cards and a fast CPU, so I'm thinking RAID 0 would give me some good hard drive performance. From your experience, is RAID 0 viable?

  Read the article

• Does a ext4 reader for Windows exist?

  - by zillion

  Is there any software or applications that can read ext4 from Windows?

  Read the article

• Problem after resizing partition for Fedora under Vmware fusion

  - by user20196

  Hi, I am running FC9 under VMware Fusion 3.0 I wanted to resize my /dev/sda2 partition. In order to do that I did the following: 0. changed the size of the vmware file (under VMware settings). 1. rebooted the host to rescue mode without mounted disks 2. fdisk - removed & added /dev/sda2 - i had bigger /dev/sda2 3. lvm pvresize /dev/sda2 4. lvm pvdisplay - it showed me bigger size on /dev/VolGroup00 for /dev/sda2 5. lvm vgchange -a y - device-mapper: reload ioctl failed: Invalid argument - 2 logical volume(s) in volume group "VolGroup00" now active This is not true because there is no /dev/VolGroup00/LogVol00 My whole "/" disappeared. dmsetup table, shows: VolGroup00-LogVol01: 0 2097152 linear 8:2 38338944 VolGroup00-LogVol00: Can some one help me to solve this? Thank You.

  Read the article

• Excel - export sheet to fixed-width text file?

  - by jkohlhepp

  I know that Excel has functionality to import fixed-width text files where it presents a dialog that lets you choose where the begins and ends of fields are which it puts into columns. Does it also have functionality where, given an existing spreadsheet, you can export to a fixed-width text file? If so, how do I access this? I have tried using Save As and choosing Text File but it seems to only save as Tab-delimited which doesn't help me. This is Excel 2003 if it matters. Thanks, ~ Justin

  Read the article

• Problem in installing OpenOffice 3.1 on Solaris 10

  - by Sunil Kumar Sahoo

  I want OpenOffice in Solaris. So I downloaded OpenOffice from the link below. http://download.openoffice.org/other.html#tested-full My OpenOffice is in .tar.gz format so I unzipped the file using gunzip and then untar'ed the file using tar xvf command. Now I got a directory containing packages subfolder. When I cd to that directory I found too many subdirectories. I could not find a single .pkg file or .jar file or .sh file so that I can install the OpenOffice in Solaris 10. How can I install OpenOffice in Solaris 10 given the scenario above?

  Read the article

• Anyone know how to get dual screens working on a Dell E6410 laptop with Ubuntu 10.04 64 bit?

  - by Curtis

  I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine). Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?

  Read the article

• disk-to-disk backup without costly backup redundancy?

  - by AaronLS

  A good backup strategy involves a combination of 1) disconnected backups/snapshots that will not be affected by bugs, viruses, and/or security breaches 2) geographically distributed backups to protect against local disasters 3) testing backups to ensure that they can be restored as needed Generally I take an onsite backup daily, and an offsite backup weekly, and do test restores periodically. In the rare circumstance that I need to restore files, I do some from the local backup. Should a catastrophic event destroy the servers and local backups, then the offsite weekly tape backup would be used to restore the files. I don't need multiple offsite backups with redundancy. I ALREADY HAVE REDUNDANCY THROUGH THE USE OF BOTH LOCAL AND REMOTE BACKUPS. I have recovery blocks and par files with the backups, so I already have protection against a small percentage of corrupt bits. I perform test restores to ensure the backups function properly. Should the remote backups experience a dataloss, I can replace them with one of the local backups. There are historical offsite backups as well, so if a dataloss was not noticed for a few weeks(such as a bug/security breach/virus), the data could be restored from an older backup. By doing this, the only scenario that poses a risk to complete data loss would be one where both the local, remote, and servers all experienced a data loss in the same time period. I'm willing to risk that happening since the odds of that trifecta negligibly small, and the data isn't THAT valuable to me. So I hope I have emphasized that I don't need redundancy in my offsite backups because I have covered all the bases. I know this exact technique is employed by numerous businesses. Of course there are some that take multiple offsite backups, because the data is so incredibly valuable that they don't even want to risk that trifecta disaster, but in the majority of cases the trifecta disaster is an accepted risk. I HAD TO COVER ALL THIS BECAUSE SOME PEOPLE DON'T READ!!! I think I have justified my backup strategy and the majority of businesses who use offsite tape backups do not have any additional redundancy beyond what is mentioned above(recovery blocks, par files, historical snapshots). Now I would like to eliminate the use of tapes for offsite backups, and instead use a backup service. Most however are extremely costly for $/gb/month storage. I don't mind paying for transfer bandwidth, but the cost of storage is way to high. All of them advertise that they maintain backups of the data, and I imagine they use RAID as well. Obviously if you were using them to host servers this would all be necessary, but for my scenario, I am simply replacing my offsite backups with such a service. So there is no need for RAID, and absolutely no value in another layer of backups of backups. My one and only question: "Are there online data-storage/backup services that do not use redundancy or offer backups(backups of my backups) as part of their packages, and thus are more reasonably priced?" NOT my question: "Is this a flawed strategy?" I don't care if you think this is a good strategy or not. I know it pretty standard. Very few people make an extra copy of their offsite backups. They already have local backups that they can use to replace the remote backups if something catastrophic happens at the remote site. Please limit your responses to the question posed. Sorry if I seem a little abrasive, but I had some trolls in my last post who didn't read my requirements nor my question, and were trying to go off answering a totally different question. I made it pretty clear, but didn't try to justify my strategy, because I didn't ask about whether my strategy was justifyable. So I apologize if this was lengthy, as it really didn't need to be, but since there are so many trolls here who try to sidetrack questions by responding without addressing the question at hand.

  Read the article

• OSX 10.6.6 SSH md5 break-in check

  - by Alex

  Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

  Read the article

• change from bash shell prompt to regular shell prompt on centos

  - by user881480

  my centos environment has just become bash shell prompt: -bash-3.2# how do I change it back to the usual # prompt? what places should I check for possibly modifications? Update: I was not clear in my question: the prompt used to be just a single # and supports more syntax(a different shell script than bash 3.2 perhaps)? I would like to switch back to that. for example, ll is not longer supported in this bash shell

  Read the article

• Rotate screen using xrandr on Solaris 10

  - by sixtyfootersdude

  How do I call the xrandr command? I want to rotate my screen 90 deg. clockwise. Here is the usage: % xrandr -help usage: xrandr [options] where options are: -display <display> or -d <display> -help -o <normal,inverted,left,right,0,1,2,3> or --orientation <normal,inverted,left,right,0,1,2,3> -q or --query -s <size>/<width>x<height> or --size <size>/<width>x<height> -r <rate> or --rate <rate> or --refresh <rate> -v or --version -x (reflect in x) -y (reflect in y) --screen <screen> --verbose --dryrun --prop or --properties --fb <width>x<height> --fbmm <width>x<height> --dpi <dpi>/<output> --output <output> --auto --mode <mode> --preferred --pos <x>x<y> --rate <rate> or --refresh <rate> --reflect normal,x,y,xy --rotate normal,inverted,left,right --left-of <output> --right-of <output> --above <output> --below <output> --same-as <output> --set <property> <value> --off --crtc <crtc> --newmode <name> <clock MHz> <hdisp> <hsync-start> <hsync-end> <htotal> <vdisp> <vsync-start> <vsync-end> <vtotal> [+HSync] [-HSync] [+VSync] [-VSync] --rmmode <name> --addmode <output> <name> --delmode <output> <name> This is what I tried: % xrandr -o left X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 159 (RANDR) Minor opcode of failed request: 2 () Serial number of failed request: 16 Current serial number in output stream: 16 I am running Solaris 10.

  Read the article

• Best way to compress avi files for web viewing and best format for view

  - by Daniel

  What is the best tool for reducing the file size of AVI files to post for viewing on the web? Also what is the recommended format?

  Read the article

• Is it safe to disable nmi_watchdog?

  - by Rayne

  I'm using RHEL 6 (kernel 2.6.32-131) and I'm trying to start oprofile, but I keep getting an error. My oprofile version is 0.9.6-12. I was able to successfully do opcontrol --init But when I did a opcontrol --start --no-vmlinux I got the error Using default event: CPU_CLK_UNHALTED:100000:0:1:1 Error: counter 0 not available nmi_watchdog using this resource ? Try: opcontrol --deinit echo 0 > /proc/sys/kernel/nmi_watchdog I don't know if it's safe for me to do this? For what I googled, it seems that nmi_watchdog is used to reboot the system if it hangs, and that sounds like something I want. Also, grep NMI /proc/interrupts shows a bunch of numbers, which I guess indicates that nmi_watchdog is already running? How can I run both oprofile and nmi_watchdog?

  Read the article

• LaunchDaemon causing Lion to hang on boot

  - by Brett

  I've got a Mac Mini 2011, which I intend to use for a few tasks such as Plex and running a few VM's. I've installed virtualbox, along with XAMPP and phpvirtualbox, which all worked fine. However, getting this to run on startup is proving a real PITA! I'm at the moment trying to get vboxwebsrv running on boot. I've created a launchd plist within /Library/LaunchDaemons to run it and it works fine... well sort of. Lion when booting will show the spinning wheel and stop, never showing a GUI - however if I remote in via screen sharing or SSH, I can login fine and see that vboxwebsrv has launched successfully. Setting this plist to disabled makes lion boot up fine again. Initially I thought it was due to it staying open, so tried to add -b which causes it to run in the background, this just caused launchd to constantly spawn new processes and didn't even fix my problem of Lion being stuck at the spinning wheel. Does anyone have any ideas? I'm losing my mind here! PLIST: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Disabled</key> <false/> <key>KeepAlive</key> <false/> <key>UserName</key> <string>vbox</string> <key>RunAtLoad</key> <true/> <key>OnDemand</key> <false/> <key>Label</key> <string>org.virtualbox.vboxwebsvc</string> <key>ProgramArguments</key> <array> <string>/Applications/VirtualBox.app/Contents/MacOS/vboxwebsrv</string> </array> </dict> </plist>

  Read the article

• Having problems install py2app 0.5.2

  - by Francis Young

  Hi there, I am a beginner at python so please excuse me for silly comments or rookie mistakes that i make. I was trying to install py2app 0.5.2 and i hit an error: $Best match: altgraph 0.7.1 $Downloading http://pypi.python.org/packages/source/a/altgraph/altgraph-$0.7.1.tar.gz#md5=f65988bf153410a8514bcdad6a3a8ba6 $Processing altgraph-0.7.1.tar.gz $Running altgraph-0.7.1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-GGBuKJ/altgraph-$\0.7.1/egg-dist-tmp-NdWVjC $error: doc/changelog.rst: No such file or directory I was wondering what the solution to this problem is?

  Read the article

• Developer's PC - worth getting more than 8GB RAM?

  - by Borek

  I'm building a developer PC and am wondering whether to get 8GB or 12GB. It's a Core-i7 860 system, i.e., 1156 motherboards with 4 slots for RAM sticks, dual channel, usually up 16GB (as opposed to 1366 sockets where 6 banks / triple-channel are used). 8GB would be cheaper to get especially because price per GB is lower with 4x2GB compared to 2x4GB. Also the availability is worse for 4GB DIMMs here where I live; those are the main practical advantages of 8GB. (Edit: I should have stressed the price difference more - in the eshop I'm buying from, the difference between 12GB and 8GB is so big that I could almost buy a whole new netbook for it.) However, I understand that more RAM can never do harm which is the point of this question - how much of a difference will 12GB make as opposed to 8GB? Honestly, I've always been on 3.2GB systems (4GB but 32bit system) and never felt much pain from having too little memory - of course there could be more but for instance compiler's performance was usually held back by slow I/O or not utilizing multiple cores on my CPU. Still, I'm not questioning that 8GB will be useful, however, I'm not sure about the additional 4GB difference between 8 and 12 gig. Anyone has experience with 8GB / 12GB systems? The software I usually run all the time: Visual Studio or Eclipse (both should be fine with ~2GB RAM, after that I feel their performance is I/O bound) Firefox (it can never have enough RAM can it? :) Office (~500MB RAM should be enough) ... and then some smaller apps like Skype, other browsers, some background services etc.

  Read the article

• ustream and justin.tv don't work, UTube and bitgravity are fine

  - by scottstonehouse

  Can anyone explain this? On this laptop, ustream and justin.tv don't work - just get a blank screen. But UTube and bitgravoty work fine (also flash based). 64-bit windows 7 - but I have 64-bit windows 7 on my desktop machine and everything works fine there. Good place to test is here http://live.twit.tv/ where the bitgravity feeds work fine, but ustream and justin.tv don't.

  Read the article

< Previous Page | 583 584 585 586 587 588 589 590 591 592 593 594  | Next Page >