Search Results

Search found 16800 results on 672 pages for 'alan long'.

Page 588/672 | < Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >

• How should I use my new SSD drive?

  - by jasondavis

  I just built a new PC the other day. Specs... Processor: Intel i7-930 quad core CPU CPU Cooler: COOLER MASTER Hyper 212 Motherboard: AsRock X58 Extreme 3 RAM/Memory: 6gb G-Skill tripple channel DDR3 memory (3 sticks of 2gb planning to get another kit to make it 12gb total soon) Operating System Hard drive: Intel X25-M 80GB Mainstream SATA2 Solid State Drive Video Cards: 2 XFX ATI Redeon HD 4650 cards to run 3-4 monitors Case: Lian Li PC-B10 Midtower case Power Supply: Antec TruePower New TP-750 Blue 750W Operating System Windows 7 Pro 64bit Not sure if the specs are helpful at all but I posted them just in case. So I got everything put together and running great so far but I need some advice/ideas/help/tips. I got the SSD drive in hopes of using it strictly for my windows 7 install along with all my other programs I install. I am then going to get another drive or 2 just for data (video,music,photos, etc). So my plan is to just install the new data drives and then in windows 7 I will change my "My documents" "My Music" "My Video" "MY Photos" library's to be located on the data drives instead of the OS SSD drive. I would ultimately like to install all my programs with my windows install on the SSD drive and then create an IMAGE of the drive and then 6 months down the road if things are sluggish I can just wipe the drive and restore my IMAGE with all my programs and settings in tact still. So here are some questions now. 1) How can I verify that TRIM is working on my new SSD? 2) Is there anything above that I missed that I should be doing? I think I once read that there is a page file or some sort of file that windows changes a lot and that it should be moved off f an SSD an onto my data drives. DOes anyone know what I might of heard? If you do can you explain the pros and cons of doing such a thing as well as how to possibly? 3) Any tips or advice to get the best performance from all this, I built a pretty nice system and I just want to make it stay that way as long as I can.

  Read the article

• How do I (robustly) remotely execute tasks on Windows workstations in a domain?

  - by Zac B

  I'm not even sure if "robustly" is a word. Anyway. Context: We have a few hundred Windows 7 workstations on a LAN. We use AD/GPO management pretty heavily, but there are a lot of periodic and/or manual maintenance tasks we need to do that can't be done via GPO/scheduled task. For example, say I want to execute program X (which runs silently, in the background, and doesn't bother the user) on workstation Y, or say I want to execute task A on a workstation group B either on a schedule or on demand. Kicking the users off of their computers to do this (i.e. using RDP) is a no-no, and doesn't work on groups anyway. Question: What's the best way to do this that is robust enough that, after setup, I could give it to beginner support people (read: people who are phobic of the command line, and get confused with GUI interfaces more complicated than Firefox)? I'm a competent programmer, and, if there is a robust set of tools or framework out there for this type of task, I'd consider hacking something together myself if it didn't take too long. If there's some combination of tools or techniques that others use to make remote-workstation-administration doable by beginners, I have yet to find it. For those who care about the "why": I'm midlevel IT, and was told to implement a remote management solution that allows arbitrary/scheduled remote execution, with confirmation that programs actually ran remotely, and the ability to view what they returned. "Why?" I asked, "Can't I just use PsExec and the task scheduler on a dispatcher machine?" "No," I was told, "'Joe' the second-week tech is going to be in charge of this one, and he needs something simple with a GUI." What I've tried: I've played with making a bunch of one-clickable "transfer files to remote computer and run them with PsExec" batch/VB scrips, but those tend to break down and don't easily support running on customizable groups. I've played a little bit with the Windows version of Puppet, but it doesn't support arbitrary-time remote execution (it's ability to group computers into a tree/node structure is really nice though). I've used an older version of Altiris, and, while it does a lot of what I want, it's interface is awful, it's slow, crashes a lot, and is probably too expensive for management. SwiftWater's DMS solution does some of what I want, but it's very underdeveloped, closed-source (not a deal breaker but not ideal), and I get the impression that support and reliability are lacking.

  Read the article

• Unable to boot from LiveCD/USB and even Super Grub Disk!

  - by Reuben L.

  Hi all, I'm in a fix. Basically this morning, I decided to format my Win7 as it was getting really slow and I did so with no problems. I also have a Linux Mint OS on dual boot. Since I was springcleaning my windows partition, I decided it was a good idea to do the same to my linux partition. I downloaded the latest version of Linux Mint (Julia) and burned the LiveCD. Now here is where the problem lies, when I restarted Windows and chose to boot from the LiveCD, it didn't work. No joke. There was just a little underscore blinking for a long time before it went back to GRUB which prompted me to select an OS to boot. However, when I went into my old Linux Mint OS and restarted the machine, the LiveCD worked... to a certain extent. It would load and look as though it was ready to install Linux Mint 10 but the moment it got to the option screen, the whole screen turned into a checkered and jumbled mess. At this point I thought it was the LiveCD or the .iso file. I had an Ubuntu LiveUSB for recovery purposes and I tried that. The exact same thing happened. Can't boot the LiveUSB if I restarted from Windows, but works when I reboot from Linux. BUT still the same checkered screen that doesnt respond. Did a bit of googling and reckoned it might be something wrong with my GRUB. Did some updating and didnt make a difference. Then I tried the Super Grub Disk and STUPIDLY uninstalled GRUB. (Note that booting to SGD had the exact same problem - can't be done if I rebooted from Windows). Now I can't access my Linux Mint 9 cos the the bootup screen (mbr) only has Windows 7 as an option. Remember me mentioning that I can't boot from any CD/USB/recovery CD when I reboot from Windows? And now that I can't access Linux, there's no way for me to do any form of recovery! I've tried using the command prompt utility at startup recovery but to no avail. Anyone can help me with this?

  Read the article

• Why did Intel drop the Itanium?

  - by Cole Johnson

  I was reading up on the history of the computer and I came along the IA-64 (Itanium) processors. They sounded really interesting and I was confused as to why Intel would decide to drop them. The ability to choose explicitly what 2 instructions you wanted to run in that cycle is a great idea, especially when writing your program in assembly, for example, a faster bootloader. The hundreds of registers should be convincing for any assembly programmer. You could essentially store all the functions variables in the registers if it doesn't call any other ones. The ability to do instructions like this: (qp) xor r1 = r2, r3 ; r1 = r2 XOR r3 (qp) xor r1 = (imm8), r3 ; r1 = (imm8) XOR r3 versus having to do: ; eax = r1 ; ebx = r2 ; ecx = r3 mov eax, ebx ; first put r2 into r1 xor eax, ecx ; then set r1 equivalent to r2 XOR r3 or ; SAME mov eax, (imm32) ; first put (imm32) into r1 xor eax, ecx ; then set r1 equivalent to (imm32) XOR r3 I heard it was because of no backwards x86 comparability, but couldn't thy be fixed by just adding the Pentium circuitry to it and just add a processor flag that would switch it to Itanium mode (like switching to Protected or Long mode) All the great things about it would have surly put them a giant leap ahead of AMD. Any ideas? Sadly this means you will need a very advanced compiler to do this. Or even one per specific model of the CPU. (E.g. a newer version of the Itanium with an extra feature would require different compiler). When I was working on a WinForms (target only had .NET 2.0) project in Visual Studio 2010, I had a compile target of IA-64. That means that there is a .NET runtime that was able to be compiled for IA-64 and a .NET runtime means Windows. Plus, Hamilton's answer mentions Windows NT. Having a full blown OS like Windows NT means that there is a compiler capable of generating IA-64 machine code.

  Read the article

• Is this iptables NAT exploitable from the external side?

  - by Karma Fusebox

  Could you please have a short look on this simple iptables/NAT-Setup, I believe it has a fairly serious security issue (due to being too simple). On this network there is one internet-connected machine (running Debian Squeeze/2.6.32-5 with iptables 1.4.8) acting as NAT/Gateway for the handful of clients in 192.168/24. The machine has two NICs: eth0: internet-faced eth1: LAN-faced, 192.168.0.1, the default GW for 192.168/24 Routing table is two-NICs-default without manual changes: Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 (externalNet) 0.0.0.0 255.255.252.0 U 0 0 0 eth0 0.0.0.0 (externalGW) 0.0.0.0 UG 0 0 0 eth0 The NAT is then enabled only and merely by these actions, there are no more iptables rules: echo 1 > /proc/sys/net/ipv4/ip_forward /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # (all iptables policies are ACCEPT) This does the job, but I miss several things here which I believe could be a security issue: there is no restriction about allowed source interfaces or source networks at all there is no firewalling part such as: (set policies to DROP) /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT And thus, the questions of my sleepless nights are: Is this NAT-service available to anyone in the world who sets this machine as his default gateway? I'd say yes it is, because there is nothing indicating that an incoming external connection (via eth0) should be handled any different than an incoming internal connection (via eth1) as long as the output-interface is eth0 - and routing-wise that holds true for both external und internal clients that want to access the internet. So if I am right, anyone could use this machine as open proxy by having his packets NATted here. So please tell me if that's right or why it is not. As a "hotfix" I have added a "-s 192.168.0.0/24" option to the NAT-starting command. I would like to know if not using this option was indeed a security issue or just irrelevant thanks to some mechanism I am not aware of. As the policies are all ACCEPT, there is currently no restriction on forwarding eth1 to eth0 (internal to external). But what are the effective implications of currently NOT having the restriction that only RELATED and ESTABLISHED states are forwarded from eth0 to eth1 (external to internal)? In other words, should I rather change the policies to DROP and apply the two "firewalling" rules I mentioned above or is the lack of them not affecting security? Thanks for clarification!

  Read the article

• System failure - need diagnostic recommendation

  - by Ladislav Mrnka

  I have big problem with my computer. Configuration is: Intel i7 + 6x2GB OCZ DDR3 Motheboard: Asus P6T Deluxe V2, HDD controller configured to AHCI Main drive: OCZ Vertex 2 (SSD) - contains all installed programs and system Second drive: Samsung SpinPoint - contains User profiles, ProgramData, virtual machines and databases Third drive: Samsung SpinPoint - data drive + backups OS: Windows 7 Ultimate x64 I have never had any problem with this computer until now. During weekend my computer completely crashed without any reason. Each time I tried to boot to Windows I got BSOD with message BAD_SYSTEM_CONFIG_INFO and automatic restart (I didn't install any new SW or HW). But after restart main OCZ drive was disconnected (not detected by BIOS). When I turned off and on computer, the drive was again connected. It also happend every single time I tried to repair installation somehow. It ended with some error and after restart drive was disconnected. The only thing which worked was format + fresh install. After installing almost everything I wanted to install Visual Studio 2010 Ultimate (complete installation without SQL Server Express). During installation of VS itself I always get BSOD - it is too fast so I'm not able to read description. After restart it searches for all disk drives for really long time and sometimes it changes boot drive so the system is not able to start - Bootmgr not found. After reconfiguring BIOS the system starts. There is no event describing the failure in Event viewer. Installing VS 2010 is absolutely necessary for me. I need help with diagnostic. I need to find where is the problem - I expect that the problem is in OCZ drive or in HDD controller on motherboard but I don't know how to find it. All components still have valid warranty. Can you recommend me some approach or tools to find the problem? Edit: I'm still looking for source of the problem. New information is that Windows are not able to perform check disk (Chkdsk) on the SSD system drive. After restarting it always starts checking drive and in part where files are checked it fails with BSOD - BAD_SYSTEM_CONFIG_INFO. After next restart and skipping check disk tests the system runs.

  Read the article

• Deployment/provisioning tool for commercial applications (not developed in-house)

  - by mfinni

  I help manage a few hosted commercial applications, and we have a lot of manual processes involved when doing new customer-instance deployments into the shared (multitenant) environment. Allow me to describe the most relevant features, and then we can talk about the tools. We have an application on AIX, that requires dozens of changes to config files (some plain text, some XML) as well as a good number of commands to be run on multiple servers - some to start the new instance, some to restart our shared authentication and reporting engines, etc. The config changes follow templates, of course. The servers in question will also depend on the initial conditions specified by the implementer/deployer - we may choose to deploy a given customer to our servers in Europe, or one set of servers may be active-active whereas a different set of servers is active-passive - in short, there's a lot of complications. We have another application that run on IIS 6 and SQL. The DBAs don't want any automation of the SQL components and that's fine with me, but automating the IIS bit would be great. For a new customer instance, we make a filesystem copy of a template Virtual Directory target named after the new customer, make a new AppPool to match, edit a VirDir template .xml file to replace the filepaths and AppPool names with the new ones, and then make a new VirDir from the modified template XML to point to the new filesystem folder and app pool. For the first case, something like ControlTier or Chef might be good. For the second, the new(ish) Web Deploy from MS would probably do a good job. Has anyone used these tools or others to do something similar for applications? More of a nice-to-have, not a fixed requirement - Has anyone used anything that works on both platforms? I'm looking for something free, because the official word is that within a year, we will have whatever HP has renamed the OpsWare suite, which should be able to do stuff like this. Edit - based on someone's suggestion, looking at CFengine for the AIX application, it doesn't seem to address my pain. The problem isn't keeping a given config synced across dozens of servers, we have rsync for that. The problem is that onboarding a new customer instance touches dozens of files, putting pieces of the same or similar information into them - some are new stanzas in existing files, some are new files, and some are new directories. This is a several-hours-long process that is also error-prone because it's mostly done by hand. I guess I'm looking for config-file generation and management. I have built a small Perl script to do something similar for a much smaller case - it binds a CSV file into variables, and then does a copy-and-search-and-replace from a set of template config files. I could probably do the same here.

  Read the article

• Windows Server 2008 R2 loses ability to connect to network share

  - by JamesB

  I could sure use some help with this one: I've got two Windows Server 2008 R2 x64 Terminal Servers, as well as several 2003 servers (DNS / Wins / AD / DC). On the two 2008 boxes, every now and then they will get in this mode where you can't map a drive to a random server. I say random server because it's not always the same server that you can't map to. Here is a summary of what I can and can't do: net view \\servername Sometimes this works, sometimes it does not. net view \\FQDN This always works. net view \\IPAddress This always works. ping servername Sometimes this works, sometimes it does not. ping FQDN This always works. ping IPAddress This always works. I've been looking all over for a solution to this. It sure seems like Microsoft would have a hotfix by now. The kicker to this is that it sometimes works great, especially after a reboot. It may run for 2 weeks just fine, but all of a sudden it will fail to resolve the remote server name. It will then be this way for a few days, then it might start working again. Also, while it's in the mode of not working, the other servers have no problem getting there. It's just these 2008 R2 Terminal Servers. Setting a static entry in the Hosts file and LMHosts does not make it work. All servers have static IPs and they are registered in DNS and Wins just fine. Here is a long thread on MS Technet of the exact same problem, but they don't have a good solution. Here is their workaround (It was from June of 2010): Good news - a hotfix is in the works and a workaround has been identified: Root cause is that since this is SMB1 all user sessions are on a single TCP connection to the remote server. The first user to initiate a connection to the remote SMB server has their logon-ID added to the structure defining the connection. If that user logs off all subsequent uses of that TCP session fail as the logon-id is no longer valid. As a workaround for now to keep the issue from happening you will want to have the user not logoff the Terminal Server only disconnect their sessions. Any word from anyone out there about a solution? Any help would sure be appreciated. Thanks, James

  Read the article

• New-ManagedContentSettings - not working properly under Exchange 2010

  - by mfinni

  I have a client that is divesting a business unit into a new AD forest, Exchange org, etc. We're using Quest tools to migrate users and mailboxes. However, I have to build the new infrastructure to match the old one. In the old one, we're using Managed Folder Mailbox Policies to limit (or allow) retention. They started with Exchange 2007 and never upgraded to Retention Policies; oh well. So, in the old environment, when you use a 2007 server to define a new Managed Content Setting, you can pick "Email" from the dropdown for MessageClass. This is a display name; the actual MessageClass values are thus: MessageClass : IPM.Note;IPM.Note.AS/400 Move Notification Form v1.0;IPM.Note.Delayed;IPM.Note.Exchange.ActiveSync.Report;IPM.Note.JournalReport.Msg;IPM.Note.JournalReport.Tnef;IPM.Note.Microsoft.Missed.Voice;IPM.Note.Rules.OofTemplate.Microsoft;IPM.Note.Rules.ReplyTemplate.Microsoft;IPM.Note.Secure.Sign;IPM.Note.SMIME;IPM.Note.SMIME.MultipartSigned;IPM.Note.StorageQuotaWarning;IPM.Note.StorageQuotaWarning.Warning;IPM.Notification.Meeting.Forward;IPM.Outlook.Recall;IPM.Recall.Report.Success;IPM.Schedule.Meeting.*;REPORT.IPM.Note.NDR If I take that and try to mangle it into a new cmdlet for Ex2010 in my new environment here's what I get New-ManagedContentSettings -Name "Delete Messages older then 90 days" -FolderName "Entire Mailbox" -RetentionEnabled $True -AgeLimitForRetention 90 -TriggerForRetention WhenDelivered -RetentionAction DeleteAndAllowRecovery -MessageClass "IPM.Note","IPM.Note.AS/400MoveNotificationFormv1.0","IPM.Note.Delayed","IPM.Note.Exchange.ActiveSync.Report","IPM.Note.JournalReport.Msg","IPM.Note.JournalReport.Tnef","IPM.Note.Microsoft.Missed.Voice","IPM.Note.Rules.OofTemplate.Microsoft","IPM.Note.Rules.ReplyTemplate.Microsoft","IPM.Note.Secure.Sign","IPM.Note.SMIME","IPM.Note.SMIME.MultipartSigned","IPM.Note.StorageQuotaWarning","IPM.Note.StorageQuotaWarning.Warning","IPM.Notification.Meeting.Forward","IPM.Outlook.Recall","IPM.Recall.Report.Success","IPM.Schedule.Meeting.*","REPORT.IPM.Note.NDR" -whatif Invoke-Command : Cannot bind parameter 'MessageClass' to the target. Exception setting "MessageClass": "The length of t he property is too long. The maximum length is 255 and the length of the value provided is 518." At C:\Users\MFinnigan.sa\AppData\Roaming\Microsoft\Exchange\RemotePowerShell\pfexcas02.fve.ad.5ssl.com\pfexcas02.fve.ad .5ssl.com.psm1:28204 char:29 + $scriptCmd = { & <<<< $script:InvokeCommand ` + CategoryInfo : WriteError: (:) [New-ManagedContentSettings], ParameterBindingException + FullyQualifiedErrorId : ParameterBindingFailed,Microsoft.Exchange.Management.SystemConfigurationTasks.NewManaged ContentSettings So, the config object can store all that mess, but I can't fit it in through the cmdlet to create the object. Lovely. Any ideas?

  Read the article

• What are the most likely bottlenecks determining the performance of CamStudio screen recording?

  - by Steve314

  When doing screen recording, I can get a frame rate of maybe 15 frames per second for the full screen on my 1080p monitor using the XVID codec. I can increase the speed a bit by recording a region, changing screen modes, and tweaking other settings, but I'm curious what hardware upgrades might give me the biggest bang for my buck. My PC is budget, but modern... Athlon 2 X4 645 (3.1GHz, quad core, limited cache) processor. 4GB single channel DDR3 1066 RAM. ASRock motherboard with NVidia GeForce 7025/nForce 630a Chipset. ATI Radeon HD 5450 graphics card - 512MB on board, not configured to steal system RAM. I dual-boot Windows XP and Windows 7. For the moment, XP is my bigger performance concern as it's still my getting-things-done O/S as opposed to my browser-host O/S. My goal is to make a few programming-related tutorials. For a lot of that I don't need screen recording - I can make up some slides, record audio with the PC switched off, yada yada. When I do need screen recording, I'll mostly be recording Notepad++, Visual Studio or a command prompt. Occasionally, I may be recording some kind of graphics or diagram program and using my pre-Bamboo cheap Wacom tablet - I have the CS2 versions of Photoshop and Illustrator, but I'd much more likely be using Microsoft Paint. Basically, what I'll be recording won't be making huge demands on the machine - but recording a fair number of pixels (720p preferred) will be useful. What's particularly wierd - not so long ago I still had a five-year-old Pentium 4 based PC. And (with the same 1080p monitor) it could record at not far from the same frame rate. So clearly the performance issues are more subtle than just throw-money-at-it. My first guess would be that the main bottleneck is the bandwidth for transferring data to/from the graphics card. Is that likely to be correct? In support of that, see this [Radeon HD 5450 review][1] - the memory bandwidth is only 12.8 GB/s. If you can't get data out of graphics memory quickly, you can't transfer it back to the system memory quickly. Apparently, that's slower than some top-end cards in 2002.

  Read the article

• How to enjoy DVD on Apple iPad

  - by user44251

  I believe many people spent a sleepless night yesterday waiting for the new Apple Tablet to come, just a few days ago or perhaps longer I noticed fierce debate about it, its name, size, capacity, processor, main features, price etc. And now, they can take a long breath with the new Apple Tablet named iPad officially released on 28, January, 2010 (Beijing Time). But I know a new battle just begins. iPad, sounds somewhat like iPod and it really shares some similarities in terms of shape like smart, light and portable. It has a 9.7-inch, LED-backlit, IPS display with a remarkable precise Multi-Touch screen. And yet, at just 1.5 lbs and 0.5 inches thin, it's easy to carry and use everywhere. It can greatly facilitates your experience with the web, emails, photos and videos. Right now, it can run almost 140.000 of the apps on the Apple store. It can even run the apps you have downloaded for your iPhone or iPod touch. But so far, I haven't seen any possibility that it can work with DVD, probability there is no built-in DVD-ROM or DVD player which can play DVD directly. As Apple iPad states, the video formats supported are MPEG-4 (MP4, M4V), H.264, MOV etc and audio formats accepted are AAC, Proteceted AAC, MP3, AIFF and WAV etc, those are formats that are commonly used with iMac. This could really a hard nut to crack if you want to watch your favourite DVD on this magic Apple iPad. But don't worry, there is still way out, you just need a few steps for ripping and importing DVD movies to Apple iPad with a simple application DVD to iPad converter What's on DVD to iPad Converter for Mac DVD to iPad converter for Mac is a powerful and professional application designed for the newly released Apple iPad which can rip, convert your DVD contents to Apple iPad compatible MPEG-4 (MP4, M4V), H.264, MOV etc, and other popular file formats like AVI, WMV, MPG, MKV, VOB, 3GP, FLV etc can also be converted so that you can put on your portable devices like iPod, iPhone, iRiver, BlackBerry etc. Besides, it can also extract audio from DVD videos and save as MP3, AIFF, AAC, WAV etc. Mac DVD to iPad converter has also been enhanced that can run both on PowerPC and Intel (Snow Leopard included). It can offer versatile editing features which allows you to make your own DVD videos. For example, you can cut your DVD to whatever length you like by Trim, crop off unwanted parts from DVD clips by Crop, add special effect like Gray, Emboss and Old film to make your videos more artistic. Besides, its built-in merging feature and batch mode allows you to join several DVD clips into a single one and do batch conversion. And more features can be expected if you afford a few minutes to try.

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• Recovering data from failed Raid configuration with 4 drives and two raid sets (Asus P6T / Intel ICH10r)

  - by user56365

  I've added the complete detailed version for my question below for those who can help, but want to quickly summarize my question first. I setup two Raid arrays using (4) WD Raptors, a striped set for the OS and 1+0 set for crucial data. After booting once out of the 50 times a cable fell out, the drive wasn't recognized in the array anymore. After trying to fix it, another drive did the same. I now have two drives remaining, luckily with the parity information. I know the striped set is gone, but I need the data on the other set. Can anyone recommend anything to recover the data, or fix the two drives that doesn't allow the raid controller to recognize the drives, even though they are listed on the utility screen as still apart of the configuration but that they are not found? More Details I recently upgraded to a ASUS P6T motherboard with an Intel ICH10R raid controller and changed my previous 4 drive raid array from strictly a Raid 1+0 set to a Raid 0 for the OS/Page/Scratch drive and a Raid 1+0 set for crucial data. I never had problems after upgrading with my configuration, even when a drive died and was replaced. I managed to rebuild the array fine. Unfortunately this time around, a cable came unattached and I booted my system up until the raid status screen with the degraded error. This shouldn't have been a problem, but after I attached the drive it was no longer recognized as a member in the array. Both drives actually show up as a non-member disk. I've spent a very, very long time online trying to find information or support and haven't had much luck. After spending time trying to scan the drive for errors, damaged partition info, etc.. another drive in the set decided it didn't want to be recognized as a part of the array. At this point, I have two out of the four drives still functioning, but the Raid 1+0 array went from degraded to failed and I must find a way to retrieve that data. I think the two drives still in the array have the parity information because they show up as OS (110GB),BACKUP(80GB) and OS:1(110GB),BACKUP(80GB) under windows data management. The other two are simply 74gb Raw unallocated Is it possible recover the data using those two drive only, and which tool would I use? Could it be a simple partition table or any other error that is repairable with hard drive utilities out there? I know the Raid 0 set is done for, but I would assume because the correct drives failed in a 1+0 config to save the data I can retrieve it some how.

  Read the article

• Some Memory Slots Not Working on MSI FM2-A85XA-G65 Motherboard

  - by Mike Ciaraldi

  Short version of question: Does anyone have an MSI FM2-A85XA-G65 motherboard, who can confirm that all four memory slots work? Long version: Several months ago I bought an MSI FM2-A85XA-G65 motherboard at Newegg. At that point I installed an AMD A8-5500 processor and two sticks of Corsair Vengeance 8 GB DDR3-1866 memory, and put it into my file server. I installed the RAM in slots 1 and 3, as directed in the manual, to enable dual-channel memory access. It seemed to work fine, so I bought a second identical mobo (which arrived dead, but was quickly replaced by Newegg) and set of RAM, installed an A10-5800K, and put that into my production Linux machine. Again, it seemed to work well. Eventually I happened to notice that on the server only 8 GB of RAM appeared in the BIOS. I tried each of the slots and memory modules individually and in various combinations. I even swapped processors with the production machine. The result was that putting memory in slots 1 and 2 worked (showing a total of 16 GB), but any memory in slots 3 or 4 was not recognized. However, all four memory slots in the production machine worked, and I confirmed this with both processors. I contacted MSI and arranged to ship the defective mobo back to them for replacement under warranty. I did not want my file server to be down in the interim, and I had another machine I wanted to upgrade, so I bought a third identical mobo to use. That one had the same problem -- only memory slots 1 and 2 worked. I tested it thoroughly with multiple processors and memory sticks. I sent the defective mobo back to MSI and they sent me a new one. This has the same memory slot problem. So I sent it back. The replacement arrived the other day and shows the same problem. I contacted MSI yet again and they said that nobody else has reported memory slot problems on this board and it must be my processor. So my score so far is, out of six boards of this model, I have: One where all four slots work. One which was dead on arrival. Four where only memory slots 1 and 2 work. Before I tear my other machines apart and start swapping processors again I thought I would ask if anyone else has this exact model motherboard and could confirm that all four memory slots either do or do not work. According to MSI you should be able to just plug a single memory module into any of the slots and it will work (and it does on the one mobo I have which works correctly). If you have not yet used all four slots, this is a good time to test them so you know if you can expand your memory in the future. Thanks in advance to anyone who can help.

  Read the article

• Linux Best Practices

  - by Zac

  I'm a life-long Windows developer switching over to Linux for the first time, and I'm starting off with Ubuntu to ease the learning curve. My new laptop will primarily be a development machine: 6GB RAM, 320 GB HD. I'd like there to be 2 non-root users: (a) Development, which will always be me, and (b) Guest, for anyone else. I assume the root user is added by default, like System Administrator in Windows. (1) I'd like to mount /home to its own partition, but how does this work if I have two user accounts (Development and Guest)? Are there 2 separate /home directories, or do they get shared? Is it possible to allocate more space for Development and only a tiny bit of space for Guest in GRUB2? How?!?! (2) I'm assuming that its okay that all of my development tools (Eclipse & plugins, SVN, JUnit, ant, etc.) and Java will end up getting installed in non-/home directories such as /usr and /opt, but that my Eclipse/SVN workspace will live under my /home directory on a separate partition... any problems, issues, concerns with that? (3) As far as partitioning schemes, nothing too complicated, but not plain Jane either: Boot Partition, 512 MB, in case I want to install other OSes Ubuntu & non-/home file system, 187.5 GB Swap Partition, 12 GB = RAM x 2 /home Partition, 120 GB I don't have any bulky media data (I don't have music or video libraries, this is a lean and mean dev machine) so having 320 GB is like winning the lottery and not knowing what to do with all this space. I figured I'd give a little extra space to the OS/FS partition since I'll be running JEE containers locally and doing a lot of file IO, logging and other memory-instensive operations. Any issues, problems, concerns, suggestions? (4) I was thinking about using ext4; seems to have good filestamping without any space ceiling for me to hit. Any other suggestions for a dev machine? (5) I read somewhere that you need to be careful when you install software as the root user, but I can't remember why. What general caveats do I need to be aware of when doing things (installing packages, making system configurations, etc.) as root vs "Development" user? Thanks!

  Read the article

• Anti-virus protection question?

  - by DaBaer

  About 4 years ago, I found Kaspersky and have been using the most current version since. Most people try and argue the use of AVG or Avast to me, and there are some very solid reasons I do not go that route. Over the years, I have found Kasp to become bulkier and bulkier, and have had issues setting it up for friends/family/clients. I am just curios on possible recommendations from other users, with my criteria in mind: What I like about Kasp in the past: The license sold in stores in a 3 pack, is considered a commercial license, and emails from Kasp in response to my questions, make it clear that I can do with the 3 licenses that I want, providing I do not use more than 3 installs per Key. So, allowed me to buy 3, 5, and 7 packs, and resell to users at a cheaper cost than what they would pay if they bought their own license. The ability to easily obtain a currently updated .exe for installation on multiple peoples machines. Power of the scan. Kasp has been a good solution for me (even when using a trial license) on cleaning up machines that were badly infected (in which AVG and AVAST were unable to.) Speed of install/update. After a cleanup of malwarebytes, spybot, mcafee stinger, ccleaner, and combofix, I used to be able to get Kasp Int Security installed and updated in around 5 minutes. The issues that I have with the free AV, is strength of protection. In my opinion for someone who is a 'power use' these are good alternatives, because such a user should be trained or knowledgeable enough to be careful and not get themselves in trouble. Most of the users I assist, are too PC ignorant to know any better, and go hogwild on the web. It has been my experience that the number of people coming back to me with spyware/malware/virus issues since I have converted from AVG to Kasp has been cut down to around 20% of what it used to be 4 or 5 years ago. In a perfect world, I could install and use Kasp Internet Security 2008, and be very happy. But this is not the case anymore. So after this long description of what I used, and have used, does anyone have any good recommendations on AV that isn't going to cost me too much per install?

  Read the article

• Network Services disabled (not starting) on Windows XP

  - by Rickesh John

  I am currently running Windows XP Service Pack 3 on my system. But today, when I failed to connect to the internet, via a LAN cable, I realized that almost all of the vital network services had stopped functioning. Any attempts to start it through services.msc gives me the following message: Could not start the DNS Client Service on Local Computer Error 1068: The dependency service group failed to start All my software or services that are related to networking have stopped functioning, for example, Windows Firewall is turned off permanently, so is my Avast Anti-Virus' service of Real Time Shields and Web Shield. When I insert the LAN wire into my laptop, it registers itself, but this is what I get when I do a ping localhost C:>ping localhost Unable to contact IP driver, error code 2 Moveover, with ipconfig I get this : Windows IP Configuration An internal error occurred: The request is not supported. Please contact Microsoft Product Support Services for further help. Additional Information: Unable to query host name On some further poking around, I saw that none of the "NETWORK SERVICE" process in task manager, except svchost.exe were running. Also, when I first opened the task manager, I saw some 20 processes running with username column empty for most of them. With some search in Google, I found out that these services were important, DHCP DNS Net logon Network connection Network location Awareness TCP/IP Net BIOS Helper none of them, except Network Connections are working, they do not start. The event viewer of my system shows a bunch of 7000 and 7001 event errors. I have tried re installing the network driver, booting in safe mode with networking and tried to enable those services mentioned above. I had disabled System Restore some time back, so I have no restore points for my system. I tried a lot of things from Google searches but none of them worked. Also, with such a long list of issue, I am a little confused as to what should I search on the internet. :( One more thing I would like to mention, previous morning, my anti-virus Avast detected a RootKit buried deep in my system folders. It was removed, but maybe this was a problem caused by the root kit. I did run a boot-time scan but no viruses were found. Please please please advice. Is formatting and re-installation of Windows my only option?

  Read the article

• Possible HDD malfunction. Need help in diagnosing

  - by Protheus

  Today when using my PC as I did for almost 4 years I experienced the following: during opening new tab in Opera browser screen froze. Music (AIMP 3) continued to play for about 5 minutes and then stopped too. I tried Ctrl+Alt+Del, but win7 lock screen didn't appear. Caps\Scroll or Num locks didn't switch diodes on keyboard. I rebooted my PC and saw that BIOS suggests me to enter it's settings or load by default. I chose default. It don't see proper boot device (old faitful "insert proper boot" something). After second reboot it said that there is no ExpressGate installed (which i turned off in BIOS years ago). I went into BIOS setting to turn off ExpressGate and see configs: time was not set off, all hard drives present, temp and O.C. settings are nominal (no O.C.) I've inserted my Win7 install disk to try recovery. It did load awfully long (about few minutes) and didn't see current installation. PC was utilized in 24/7 mode for almost all these years. Hardware configuration: ASUS P5Q WS Core 2 Quad Q9300 (2.5GHz no O.C.) MSI geForce GTX 460 4x2 Gb GeIL EVO 2 (AFAIR) Seagate something 750Gb (4 years as system HDD 24/7) WD 1Tb (for random stuff, 5 y.o.) Hitachi 500Gb (for even more random stuff, 6 y.o.) NEC DVDRW (ALL DISKS ARE SATA) Cooler Master Silent Pro 700W Software: Windows 7 AND Kubuntu on the same drive with GRUB loader. Sorry I can't remember HDDs and can't see them right now, but I think their models aren't relevant anyway. My idea is that due to some system error or hard drive glitch i've wrecked my primary HDD's MBR. Nevertheless I don't exclude the possibility of other failure. May it's be that motherboard or it's SATA controller? Doubt it, because all drives are seen in BIOS and I could load from DVD. Maybe GRUB got bugged somehow, although I don't see how it's possible from Windows. But I did install KUbuntu from Windows (i wasn't myself then), maybe GRUB did write itself in some windows partition and got rewriteen in process? Right now I am at work with my flash drive with me and I need some advice how to fix MBR or to hear if it's not MBR. I'm going to buy new HDD (Hitachi 7k2000) because I think that my current HDD is compromised and it's unsafe to use it as system drive, especially 24/7.

  Read the article

• Resetting root password on Fedora Core 3 - serial cable access only

  - by Sensible Eddie

  A little background: We have an old rackmount server running a customised version of Fedora, manufactured by a company called Navaho. The server is a TeamCAT, running some proprietary rubbish called Freedom2. We have to keep it going - the alternative is extraordinarily expensive, and the business is not likely to be running much longer to justify changing things. Through one means or another, it has fallen upon me to try and resolve our lack of root access. The previous admin has fallen under the proverbial bus, and nobody has any clue. We have no access to the root account for this server. ssh is running on the server, and there is one account admin that we can login with, however it has no permission to do anything (ironic...) The only other way into the server is with a null-modem serial cable. This works... up to a point. I can see the BIOS, I can see the post BIOS screen, and then I see "Starting grub", followed by another screen with about four lines of Linux information, but then it stops at that point. The server continues booting, and all services come online after around two minutes, but the serial terminal displays no more information. I understand it is possible to put Linux into "single user mode" to reset a root password, but I have no idea how to do this beyond trying to interrupt it at the grub stage listed above. When I have tried it just froze. It was almost like grub had appeared (since the server did not continue booting) but I couldn't see it on the serial terminal. Which made me think maybe the grub screen has some different serial settings? I don't know... it's the first time I've ever used serial for access! A friend of mine suggested trying to use a Fedora boot CD. We could boot from USB, so something along this approach is possible but again we still can only see what's going on with the serial terminal, so it might not be achievable. Does anyone have any suggestions for things I can try? I appreciate this is a bit of a long shot, but any assistance would be invaluable. *UPDATE 1 - 28/8/12 * - we will be making some attempts on this today and will post further details later!

  Read the article

• Repair BAD Sectors or Buy a new HDD?

  - by Nehal J. Wani

  I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

  Read the article

• Have a server, need to figure out a method of backup

  - by PolishHurricane

  My company has an older Dell 2650 server running ArchLinux x64: http://www.dell.com/downloads/global/products/pedge/en/2650_specs.pdf (2 x 2.4GHz Intel Xeon w/around 3287 RAM according to "free -m") We use it to host our internal company site and to post some information from our orders to and we'd like the ability to keep it up as much as possible. What we require: - It needs to always be functional from 8am to 4pm for our data entry person to use it and others to do other things required on it. - If it goes down, we need a quick way to get the machine running again. - If it goes down, we would like to have the data backed up. Some of the major problems include: - The servers old and it may have memory issues - We don't know when one of the hard drives could fail - Our power goes out here once in a while We have a battery backup, but that's pretty much it and it's not for long term. If the server does go down, we have another system in place to store order information that comes in while it's down and repost it when it's back, but we need it up during the day. So we're wondering, what should we get for options? These are the things we thought of, sort of: Setup RAID 1, but that would involve wiping everything right? If we do that, how would we transfer the data over without messing up the server? We could buy an extra server or 2 off eBay for $100, the same model, is that practical or should we get something else? Should we buy a PC or another better server and host off that because it is if anything easier to exchange parts? Should we keep extra parts handy incase it implodes? Should we buy/use backup software? We hear drobo's are cool, but suck. Perhaps there is a software solution to this problem that backs up to another machine or gets us up and running again quickly. Also, if we are to purchase hardware, what is decent? Does anybody know of one for ArchLinux/Linux? We both know a ton about computers but we're kind of unsure what step to take with this, especially with this type of server. Thanks

  Read the article

• My VPS ubuntu server is very slow

  - by askmike

  I just installed a frech copy of Ubuntu 12.04 on my vps because my old installation was very slow, unfortunately this did not fix the problem. With slow I mean requests for my PHP websites take a long time, very slow (30 sec per request) to slow (3+ sec per request). When it's really bad SSH is also laggish. The websites are: askmike.org (pretty standard Wordpress) mvr.me (own PHP) slow? very slow: Here is a picture of loading a clean install of wordpress slow: here is a picture of loading a small PHP based website the vps The VPS has 256mb ram and an 25GB hdd. Besides serving the 2 small websites it isn't doing anything AFAIK. What have I installed Clean Ubuntu server 12.04 LAMP stack few things like git and nodejs (not using both) ossec (because I thought my server was getting hammered) munin What I already tried / done I installed munin so that I could watch io speed and such. The problem is that I don't know where to look for in the munin report. I checked logs and don't see anything strange (although I don't really know where to look for besides strange / repetitive errors and GET requests). I configured Apache MPM to: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 40 MaxRequestsPerChild 0 </IfModule> (apache is using prefork, the default) Stats I copied the munin report as it appeared at 4:50 last night to a site hosted on a shared webhost. Note that tonight my mysql crashed somewhere after 1:00 (which is a new problem altogether), so therefor the graph for last night might look strange. Can anyone help me get my VPS up to normal speed? EDIT: Thanks for the replies. The VPS is 10 bucks a month and is from directvps.nl (Dutch host and I'm also dutch). I did two speed tests for disk IO: $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 23.1506 s, 46.4 MB/s $ dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync 1073741824 bytes (1.1 GB) copied, 39.3796 s, 27.3 MB/s Anyway: how can I prove to my VPS host that it is to slow? I can understand a server being busy slowing a website down. But 5-30 sec loadtime for a normal PHP webpage?

  Read the article

• Laptops on Windows Domain sometimes have problems accessing internet when off-site

  - by FSUScoot

  Hi all-- We've had this problem for a long time. When users travel, sometimes they can't get internet access from a wired or wireless connection. Here are a couple examples: 1) A user goes to a hotel and tries to access the wireless in their room. They can connect to the access point. They open a web browser and they can't get re-directed to the hotel's login page. Because they can't log in, there's no internet access. 2) A user goes to another laboratory/university and tries to access the wired network. They connect, link is fine, PC gets IP from DHCP but no internet access. There's no login page to be re-directed to. It should just "work". What I've found is that it's a DNS issue. Because the computer is on a Windows Domain, it seems it MUST use our DNS servers. Even if you connect to an outside network and do an ipconfig /all, it looks like everything is ok. It'll even show their DNS servers listed in the config. The computer just won't use the other network's DNS server. I found a reg key that keeps our DNS servers listed and it seems that they take priority every time: HKLM\SOFTWARE\Policies\Microsoft\Windows NT\DNSClient All the values under that key are for our AD domain. NameServer and Searchlist never change. What I've found is if the user edits the NameServer string and puts the DNS server of the network they're on, everything works just fine. They get re-directed to the hotel's correct login page or their internet access starts working. It's only a problem if the network they're on blocks outside DNS or a hotel that uses an internal name in their front page redirection that only their DNS server knows about, i.e., not public. If the re-direct page starts with an IP, like 10.10.10.10, it'll work just fine. Obviously this isn't a fix for everyone. Most of my users are pretty knowledgeable so it’s easy for me to walk them through or send them a .reg file that they can edit and run. This problem isn't limited to Windows 7. It was like this with XP as well. It's not hardware related. The problem exists on both wired and wireless, Intel or Broadcom, laptops or desktops. Anyone else have this problem? Is there a GPO I can change that I missed? Got a good work-around for this? Thanks for any help!

  Read the article

• Can I use one virtualbox disk for multiple machines?

  - by mxp

  I'm not sure what search term to use and skimming through the VirtualBox manual didn't help me either, so I ask my two questions here... My setup is this: PC with dual boot into Windows 7 and a Debian operating system (both 64bit). I've created a virtual machine (Kubuntu, 64bit) under Windows and put it's VDI file on a SMB share of my NAS. Then I created a VM under linux using the same settings for memory etc and assigned the existing VDI file to it. My idea was that I could use that virtual machine from Windows and Linux as well. (1) Is this generally something that should work without problems? I noticed that snapshots get me into trouble because they appear to be not visible from the other operating system: The snapshots I took after installing the guest system are not visible under Linux. That's why I shut down the VM after usage and not save its state while it's running. My current problem is this: I have used the VM under Windows first, then under Linux. Now it will only start on Linux. When trying this on Windows the guest OS detects some kind of hard disk error and fails to boot because it cannot mount its drive. Obviously the virtual hard disk won't fail so it must have something to do with me using it under Linux. (2) How can I fix that? Update: It also looks like any changes I made in the VM under Linux have been reset by trying to boot it under Windows. Looks like it's back to the latest snapshot. I'm confused... Update The answer to my first question can be found below. In short: It works, as long as you don't use snapshots. The answer to my second question is this: Under Windows set the VM back to the latest snapshot and then discard the snapshot so it gets merged. There should be no snapshots left at the end. If you have multiple snapshots, discard the earliest ones first (Snapshot 1, then 2, 3, ...). I'm not sure what happens if you start at the end (.., 3, 2, 1). This of course leads to some data loss since you revert all changes since the last snapshot. But at least the VM is usable again.

  Read the article

• Will spreading your servers load not just consume more recourses

  - by Saif Bechan

  I am running a heavy real-time updating website. The amount of recourses needed per user are quite high, ill give you an example. Setup Every visit The application is php/mysql so on every visit static and dynamic content is loaded. Recourses: apache,php,mysql Every second (no more than a second will just be too long) The website needs to be updated real-time so every second there is an ajax call thats updates the website. Recourses: jQuery,apache,php,mysql Avarage spending for single user (spending one minute and visited 3 pages) Apache: +/- 63 requests / responsess serving static and dynamic content (img,css,js,html) php: +/- 63 requests / responses mysql: +/- 63 requests / responses jquery: +/- 60 requests / responses Optimization I want to optimize this process, but I think that maybe it would be just the same in the end. Before implementing and testing (which will take weeks) I wanted to have some second opinions from you guys. Every visit I want to start off with having nginx in the front and work as a proxy to deliver the static content. Recources: Dynamic: apache,php,mysql Static: nginx This will spread the load on apache a lot. Every Second For the script that loads every second I want to set up Node.js server side javascript with nginx in te front. I want to set it up that jquery makes a request ones a minute, and node.js streams the data to the client every second. Recources: jQuery,nginx,node.js,mysql Avarage spending for single user (spending one minute and visited 3 pages) Nginx: 4 requests / responsess serving mostly static conetent(img,css,js) Apache: 3 requests only the pages php: 3 requests only the pages node.js: 1 request / 60 responses jquery: 1 request / 60 responses mysql: 63 requests / responses Optimization As you can see in the optimisation the load from Apache and PHP are lifted and places on nginx and node.js. These are known for there light footprint and good performance. But I am having my doubts, because there are still 2 programs extra loaded in the memory and they consume cpu. So it it better to have less programs that do the job, or more. Before I am going to spend a lot of time setting this up I would like to know if it will be worth the while.

  Read the article

< Previous Page | 584 585 586 587 588 589 590 591 592 593 594 595  | Next Page >