Search Results

Search found 2516 results on 101 pages for 'gigabit ethernet'.

Page 59/101 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• Why dhclient is still running when I choose static IP?

  - by user276851

  I modify dhcp to static in /etc/network/interfaces (like below). # The primary network interface auto eth0 iface eth0 inet static netmask 255.255.0.0 address 10.10.130.128 gateway 10.10.1.1 Then restart the interface. $ sudo ifdown eth0; sudo ifup eth0 ... $ ifconfig eth0 Link encap:Ethernet inet addr:10.10.130.128 Bcast:10.10.255.255 Mask:255.255.0.0 So the new address kicks in. But DHCP is still there? $ ps aux | grep dhc root ... dhclient3 -e IF_METRIC=100 -pf /var/run/dhclient.eth0.pid -lf /var/lib/dhcp/dhclient.eth0.leases -1 eth0 Is that normal? If not, how to restart interface in static IP while stop DHCP at the same time? Thanks a lot.

  Read the article

• Install a Mirror without downloading all packages from official repository

  - by Sam

  I first gonna explain the situation: I have a Laptop which is connected to a wifi connection, and a Desktop which can not be connected to Internet (the modem is too far from it), and i want to install some software on the last one. (The two PCs are running Ubuntu 12.04, and are connected with an Ethernet cable) I've already searched for a solution, but all I've found was the use of some softwares that should have been already installed on the "Internet-less PC". ( Keryx, APTonCD ... ) What I want to do is to create a mirror in my laptop which contain the packages i have in this one ( situated in /var/cache/apt/archive ) and i don't want to download all the packages from the official repository, I actually don't need them. Can someone tell me if it is possible to do that ? Thanks,

  Read the article

• Slow wifi after upgrading kubuntu 13.04 to 13.10

  - by RedCow22

  After upgrading from kubuntu 13.04 to 13.10 suddenly my wifi connection is very slow. Ping times are varying from 200 up to 1500 ms to www.google.nl. When I connect my ethernet cable they drop to normal times like 8 or 9 ms. Anyone experiencing the same problem or know a solution I can try? During the upgrade process a few times they asked whether I wanted to keep or replace some kind of configuration file. I'm not sure anymore which file it was, but maybe this has something to do with it. Before the upgrade both wired and wireless connection worked perfect.

  Read the article

• How to install Edubuntu on a system with low memory (256 Mb)?

  - by int_ua

  I'm preparing an old system with 256 Mb RAM to send it to some children. It doesn't have Ethernet controller and there are no Internet access at the destination. I've chosen Edubuntu for obvious reasons and modified it with UCK trying to minimize memory usage just to install, let alone using it yet. But Ubiquity won't start even in openbox (edited /etc/lightdm/lightdm.conf) because there are no space left on /cow right after booting. I've already deleted things like ibus, zeitgeist, update-manager (no network access after all), twisted-core, plymouth logos. I'm thinking about creating a swap partition on HDD, can it be later added to expand this /cow ? Is there a package for the text-mode installation which is used on Alternate CDs? I don't want to re-create Edubuntu from an Alternate CD. This behavior is reproducible in VM limited to 256Mb RAM.

  Read the article

• dhcp configuration not working ubuntu 11.10

  - by Vivek Pradhan

  I am usually behind a proxy server in college so I connect to the ethernet or wifi using manual IPv4 addresses only inside college. I have been trying really hard to get the internet work at home, there is no proxy and I have set the network to use automatic dhcp. It seems like it is not able to connect to the port, It gets disconnected after some time automatically and then tries to reconnect. The same thing is happening with wifi networks also, after some time i see a pop up asking for authentication and ultimately its not able to connect. What might be the problem here. I looked up some similar questions and checked the /etc/network/interfaces file and looks like this: auto lo iface lo inet loopback I have no idea what those lines mean but there is no configuration for eth0 or wlan0. Any help is deeply appreciated. Ubuntu loses it charms due to these small glitches.

  Read the article

• "Operating system not found" after upgrading to 13.10

  - by Hongbo Zhu

  I own a Thinkpad X121e and I upgraded its Ubuntu from 13.04 64bit to 13.10 64bit using the Update Manager. When the upgrade process suggested to restart the system, I restarted the computer and now it says "Operating system not found" after a very brief splash screen. The splash screen says something like (too brief to see everything): Intel UNDI, PXE-2.0 ... For Atheros ethernet Controller ... Check cable connection! PXE-MOF: Exiting INTEL PXE ROM I prepared a startup USB disk using Ubuntu 13.10. I tried the startup USB and it works very well on other computers. So I changed the booting order of X121e and tried all three USB slots, all said "Operating System not found" without any splash screen. I also tried using startup USB with 12.04 LTS. Same results. I do not really want to reinstall the system now. Any hints on how to proceed?

  Read the article

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• ubuntu 12.04 internet stopped working

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the internet at home anymore. I am only able to access the router, but no internet access. A have a Dell Latitude E6320 with ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via wireless and ethernet. At home, if I try connecting it through Windows it does work fine. I even checked the MAC addess and it's OK. My other laptop, which also runs ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependecies. Anyone can help me please??? I am affraid I will have to reinstall everything...

  Read the article

• Ubuntu 12.04 lts cannot build a wireless connection

  - by Jupiterr

  Hi i just got a new notebook and it came with ubuntu 12.04 lts operation system. But it can't make a wireless connection. I plugged in my Ethernet cable and i can reach the Internet with it but I need wireless connection so much. This is the first time I'm using ubuntu so i'm really confused. I can see wireless networks (including mine) but i cannot use them. It seems like it's establishing a connection but soon it gives up. Please help, I don't have much time for this and I do not have any idea about operation systems.

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• Manually activate Network Manager Applet

  - by diosney

  The issue I've is that when I connect via modem through gnome-ppp the Network Manager Applet don't detect a connection and don't let me use the configured VPNs via its interface. How Can I manually activate the Network Manager Applet? What I need is to enable the Network Manager apple in order to use the "VPN Connection" section of the GUI. When I don't have an ethernet cable connected and I connect through a modem the Network Manager applet doesn't enables itself, it is like if don't recognizes the ppp0 interface. My question is: there is a way to force the Network Manager GUI indicator to make it "alive"/"up"/"enabled" in order to use the "VPN Connections"section? Thanks in advance.

  Read the article

• Set up Trendnet TEW-638APB Access point on Ubuntu 14.04

  - by Mr. Smileys

  I have a computer running Ubuntu 14.04, it has 2 Ethernet ports. I would like to set up this computer so that the internet comes in on one of the ports and is then shared through the other port with the Trendnet wireless access point that my other devices would connect to and use the internet. I have looked online for information on setting this up but have not been able to find anything. If someone could point me to a guide that would help me or just tell me how to do this in an answer I would really appreciate it. please help me to solve this problem

  Read the article

• how can i realize a video-wall on 3-9pc with vlc

  - by Luca

  hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

  Read the article

• Win 2003 STD network adapter always showing DHCP when in static IP configuration, + it loses the DNS

  - by Darragh

  Hi, I have a server that after the first configuration it was DHCP, now I have added it to our domain and in a static IP, however after a few moments it returns to DHCP but with only some of the IPv4 setting staying the same, It loses DNS for example. I'm not sure what is causing the problem but all I know is this started to happen after I added it to the domain, Would it be a domain policy? or the NIC drivers Spec; Dell M605 Blade server Windows 2003 STD SP1 Intel Xeon Quad core NIC: Dual embedded Broadcom NetXtreme IITM 5708 Gigabit Ethernet NIC w/ TOE

  Read the article

• How to connect to the internet via command line or graphical utility given I can't click at the top of the screen?

  - by Ben

  My Ubuntu 12.04 installation has an input problem resulting preventing me from clicking near the top of the screen. That is, there is an unclickable area, circa 60 pixels high and stretching all the way across the screen. I will ask about this in a later question. For now, I would just like to be able to connect to the internet, given this limitation. I am able to access the network connections application by hitting the super key and typing "network connections". There is a LAN and a wireless network available. The network icon in the bar at the top of the screen shows an empty wedge, which I suppose means that wireless is off. I've attached the cable for the Ethernet connection, but it does not seem to have connected automatically. How can I figure out what's going on? (I'll happily edit in the output of any relevant terminal commands.) Thank you.

  Read the article

• Windows 7 "Could not reconnect all network drives" on boot

  - by Thermionix

  Windows 7 won't reconnect to my network drives on startup. Once it is done booting opening Windows Explorer and clicking each share will mount them. Windows 7 Enterprise N Service Pack 1 I have attempted formatting the windows machine - first thing done to machine was to map the network drives, upon reboot they were disconnected. It is running on an Crucial M4 64gb SSD. The host of the network shares is a Ubuntu-Server machine connected through a gigabit switch. A modem provides dhcp, although both these machines have static IP's defined. It won't reconnect the drives regardless of whether they're SAMBA shares or NFS shares - therefore I believe it's an issue with the windows machine. Ubuntu 11.10 (GNU/Linux 3.0.0-12-server x86_64) I've tried using ip address instead of netbios name for mapping shares on the windows machine, Also tried setting EnableLinkedConnections=1 gpedit.msc Computer Configuration - Administrative Templates - System-Logon - always wait for the network at computer startup and logon = yes

  Read the article

• why is there so much variance in prices for a 2-bay NAS?

  - by jcollum

  I'm considering buying a 2bay NAS for media storage. I'm perplexed by the variety of prices. They go from about $115 to $1200. The only thing I could see that differentiated the high end drive was encryption and a dual gigabit ethernet port. I don't understand how that can add up to $800+ dollars. Clearly I should know why there's this price variance before considering buying a 2 Bay NAS. Newegg link to 2 Bay NAS Should I move this question to serverfault?

  Read the article

• Internet stopped working suddenly on 12.04

  - by Daniel

  My laptop was running smoothly until yesterday. Today, I can't connect to the Internet at home anymore. I am only able to access the router, but no Internet access. A have a Dell Latitude E6320 with Ubuntu 12.04. At my job, I don't have any problems connecting this laptop both via Wireless and Ethernet. At home, if I try connecting it through Windows, it does work fine. I even checked the MAC address and it's OK. My other laptop, which also runs Ubuntu, is not facing this problem. I have already tried to restart and downgrade network-manager package and its dependencies. Can anyone help me please? I am afraid, I will have to reinstall everything.

  Read the article

• Disabled WiFi but it keeps re-enabling itself; want it to stay disabled

  - by Mike Uresti

  I have an Alienware X51 desktop with a wireless card, I have it connected via ethernet and want to permanently disable WiFi from ever using itself. When running Windows, I go to device manager and rightclick-disable the Wireless card and that takes care of my problem. Is there a similar method using Ubuntu 14.04? For now, I click on the network icon in the system tray and uncheck 'Enable wifi' but it seems to turn itself back on as I use my computer, I think I have the incident isolated to something with Steam. It seems like after I start the Steam client it always is re-enabled. Hopeful answer: Just disable/remove/block wireless card from ever working.

  Read the article

• Improve performance on Lync desktop sharing

  - by Trikks

  I'm using Lync 2010 server to handle some clients communication and screen sharing. The biggest issue is the performance with screen sharing, it is of rather high quality but the frame rate is very poor. I have been reading and searching a lot on the subject and 95% of all topics is about bandwidth, we have a 200/200 MBit Internet connection solely for this application. Also my test machines runs on an internal gigabit lan. The speeds between all boxes is hysterically fast. Next step was to ensure that there where some profiles for different bandwidths, so i registered some New-CsNetworkBandwidthPolicyProfile -Identity 50Mb_Link -Description "BW profile for 50Mb links" -AudioBWLimit 20000 -AudioBWSessionLimit 200 -VideoBWLimit 14000 -VideoBWSessionLimit 700 New-CsNetworkBandwidthPolicyProfile -Identity 100Mb_Link -Description "BW profile for 100Mb links" -AudioBWLimit 30000 -AudioBWSessionLimit 300 -VideoBWLimit 25000 -VideoBWSessionLimit 1500 Nothing fancy happend here either. Non of the test boxes have anything from Norton installed, they doesn't have any firewalls running (nor does the Lync server), all fences are down in this environment just for the testing. Is there any thing that I may have missed to improve the quality of this? Thanks

  Read the article

• Can I increase the link speed of the RAS Server on our MS Win2k3 box?

  - by Ducain

  We are running a Win2K3 Server box, and I'm a remote employee that connects via VPN. I've been frustrated for some time by the connection speed over the VPN (the office HQ has a decent speed and I have a biz class connection here), and decided to do some checking today. This morning, I was dialed in and looked at the networking tab of the task manager, and I see that the adapter for the RAS Server (the box has 4 Gigabit adapters) has a speed that seems far too low. The speed for the RAS Server link hovers between 300 - 600 Kbps. The local connection (and others) all say 1 Gbps. Can I set this to a higher speed? Is this information accurate? Thanks for the input.

  Read the article

• Wireless connects but can not connect to internet

  - by Dan

  I'm using Ubuntu 11.04 and I'm having trouble connecting to internet via wifi. Ethernet cable works though. So when I log on it auto logs on to my wifi connection at home but after about a minute or so it gives me a popup: network disabled something about .local domain and something about Avahi network (sorry if you need more on what the popup says I will reboot and look at it again). I am using Atheros wireless card. My laptop is Asus G73SW and on the forum at notebookreview.com G73SW Owner's Lounge people said they had no problem with connecting via wifi from install. Please help me because I would love to keep using this beautiful OS.

  Read the article

• using curl command to download file in parts from different interfaces and to run the commands simultaneously from a script

  - by jsjain007

  i wanted to download a file using curl command simultaneously in different parts using ip aliasing(virtual Ethernet ports) so what i did was pasted the commands in a text file and run but the problem as obvious since it is in a file the commands will be executed one by one so is there a way to run all those commands simultaneously. here is the command curl --interface eth0:0 --range 0,38010880 http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part1 curl --interface eth0:1 --range 38010880 ,- http://wdl.cache.ijinshan.com/wps/download/Linux/unstable/kingsoft-office_9.1.0.4244~a12p3_i386.deb -o kinsoft-office.part2 cat kinsoft-office.part*>kinsoft-office can anyone help me to run these above 2 commands simultaneously from the script so as to increase download speed

  Read the article

• How can a Cisco Aironet wireless card connect to a WPA encrypted network?

  - by Aibara Iduas

  I have a Thinkpad T40 running Ubuntu 10.10. I want to connect to wireless networks with WPA encryption; they appear in the network list, but are grayed out. The card does support WPA, since it works in Windows. In 10.10 the wireless works just fine with unprotected and WEP networks, but cannot connect to any WPA networks. The card is a Cisco Aironet Wireless 802.11b. I've been reading a lot of forum posts trying to find a solution, but either encounter threads where no solution was found or answers longer apply (most date from 2007, since this isn't the newest of computers). Here is the output of sudo lshw -c network: *-network:1 DISABLED description: Wireless Interface product: Cisco Aironet Wireless 802.11b vendor: AIRONET Wireless Communications physical id: 2 bus info: pci@000:02:02.0 logical name: eth1 version: 00 serial: 00:02:8a:78:6a:44 width: 32 bits clock: 33MHz capabilities: pm vpd bus_master cap_list rom ethernet physical wireless logical configuration: broadcast=yes driver=airo latency=64 maxlatency=4 mingnt=4 multicast=yes wireless=IEEE 802.11-DS Thanks, any help would be greatly appreciated!

  Read the article

• Slow wireless about 1/3 bandwidth of wired from cable modem

  - by Rhino

  HP DV6000 Wireless G Broadcom Netgear WNDR3400 router properly configured. Windows laptops using wireless G and N are considerably faster than mine. 12.04 LTS, all restricted drivers and all up to date. 50Mbps wired and 9-21 Mbps wireless on Ubuntu. 00:14.0 Bridge [0680]: NVIDIA Corporation MCP51 Ethernet Controller [10de:0269] (rev a3) Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7] Kernel driver in use: forcedeth 03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11a/b/g [14e4:4312] (rev 02) Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1370] Kernel driver in use: wl

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >